From: Arthur Marsh <arthur.marsh@internode.on.net>
To: linux-scsi@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Subject: Fwd: Re: eata fails to load on post 4.2 kernels
Date: Mon, 07 Sep 2015 18:54:46 +0930 [thread overview]
Message-ID: <55ED57DE.3070206@internode.on.net> (raw)
In-Reply-To: <55ED2DFA.6030502@internode.on.net>
[-- Attachment #1: Type: text/plain, Size: 2892 bytes --]
Forwarding without image attachment to get below message size limit of
the mailing lists.
I've uploaded the image to:
http://www.users.on.net/~arthur.marsh/20150907539.jpg
-------- Forwarded Message --------
Subject: Re: eata fails to load on post 4.2 kernels
Date: Mon, 07 Sep 2015 15:56:02 +0930
From: Arthur Marsh <arthur.marsh@internode.on.net>
To: Jiang Liu <jiang.liu@linux.intel.com>
CC: Bjorn Helgaas <bhelgaas@google.com>, tglx@linutronix.de,
linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org
Jiang Liu wrote on 07/09/15 12:36:
> On 2015/9/7 4:31, Arthur Marsh wrote:
>> Arthur Marsh wrote on 06/09/15 21:07:
>>> Arthur Marsh wrote on 06/09/15 18:34:
>>>> Arthur Marsh wrote on 06/09/15 15:58:
>>>>> Hi, I'm seeing the following on post 4.2 kernels, am currently
>>>>> bisecting
>>>>> to find where it started:
>>>
>>> First kernel in the bisection that worked without needing irqpoll:
>>>
>>> [ 73.751482] EATA0: IRQ 10 mapped to IO-APIC IRQ 17.
>>> [ 73.776711] EATA/DMA 2.0x: Copyright (C) 1994-2003 Dario Ballabio.
>>> [ 73.802005] EATA config options -> tm:1, lc:y, mq:16, rs:y, et:n,
>>> ip:n, ep:n, pp:y.
>>> [ 73.829175] EATA0: 2.0C, PCI 0xd890, IRQ 17, BMST, SG 122, MB 64.
>>> [ 73.855552] EATA0: wide SCSI support enabled, max_id 16, max_lun 8.
>>> [ 73.881125] EATA0: SCSI channel 0 enabled, host target ID 7.
>>
>> After a git bisect, I get:
>>
>> git bisect good
>> 991de2e59090e55c65a7f59a049142e3c480f7bd is the first bad commit
>> commit 991de2e59090e55c65a7f59a049142e3c480f7bd
>> Author: Jiang Liu <jiang.liu@linux.intel.com>
>> Date: Wed Jun 10 16:54:59 2015 +0800
>>
>> PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()
>>
>> To support IOAPIC hotplug, we need to allocate PCI IRQ resources on
>> demand
>> and free them when not used anymore.
>>
>> Implement pcibios_alloc_irq() and pcibios_free_irq() to dynamically
>> allocate and free PCI IRQs.
>>
>> Remove mp_should_keep_irq(), which is no longer used.
>>
>> [bhelgaas: changelog]
>> Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
>> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
>> Acked-by: Thomas Gleixner <tglx@linutronix.de>
>>
>> :040000 040000 765e2d5232d53247ec260b34b51589c3bccb36ae
>> f680234a27685e94b1a35ae2a7218f8eafa9071a M arch
>> :040000 040000 d55a682bcde72682e883365e88ad1df6186fd54d
>> f82c470a04a6845fcf5e0aa934512c75628f798d M drivers
>>
>> I'm happy to supply more details if needed.
> Hi Arthur,
> Thanks for reporting this. It seems to be an irq misrouting
> issue. Could you please help to provide:
> 1) full dmesg with the latest code
> 2) full dmesg and /proc/interrupts with the latest code and
> kernel parameter "irqpoll" specified
> Thanks!
> Gerry
The pc locks up when loading the eata module so I've attached a photo of
the monitor screen.
Arthur.
[-- Attachment #2: 2015090715dmesg-ordinary.txt --]
[-- Type: text/plain, Size: 51695 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.2.0+ (root@victoria) (gcc version 5.2.1 20150903 (Debian 5.2.1-16) ) #29 SMP PREEMPT Mon Sep 7 07:10:45 ACST 2015
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'lazy' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffaffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003ffb0000-0x000000003ffbdfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000003ffbe000-0x000000003ffdffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000003ffe0000-0x000000003fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff780000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: System manufacturer System Product Name/A8V-MX, BIOS 0503 12/06/2005
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x3ffb0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
[ 0.000000] 1 base 00D0000000 mask FFF0000000 write-combining
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x023fffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x35c00000-0x35ffffff]
[ 0.000000] [mem 0x35c00000-0x35ffffff] page 4M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x35bfffff]
[ 0.000000] [mem 0x00100000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x35bfffff] page 4M
[ 0.000000] init_memory_mapping: [mem 0x36000000-0x377fdfff]
[ 0.000000] [mem 0x36000000-0x373fffff] page 4M
[ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
[ 0.000000] BRK [0x02075000, 0x02075fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x36152000-0x370a0fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FAC60 000024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 0x000000003FFB0100 00003C (v01 A M I OEMXSDT 12000506 MSFT 00000097)
[ 0.000000] ACPI: FACP 0x000000003FFB0290 0000F4 (v03 A M I OEMFACP 12000506 MSFT 00000097)
[ 0.000000] ACPI: DSDT 0x000000003FFB03F0 0046F0 (v01 A0347 A0347001 00000001 INTL 02002026)
[ 0.000000] ACPI: FACS 0x000000003FFBE000 000040
[ 0.000000] ACPI: FACS 0x000000003FFBE000 000040
[ 0.000000] ACPI: APIC 0x000000003FFB0390 00005C (v01 A M I OEMAPIC 12000506 MSFT 00000097)
[ 0.000000] ACPI: OEMB 0x000000003FFBE040 000046 (v01 A M I AMI_OEM 12000506 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 135MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] BRK [0x02076000, 0x02076fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x00000000377fdfff]
[ 0.000000] HighMem [mem 0x00000000377fe000-0x000000003ffaffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000003ffaffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000003ffaffff]
[ 0.000000] On node 0 totalpages: 261966
[ 0.000000] DMA zone: 36 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1962 pages used for memmap
[ 0.000000] Normal zone: 223230 pages, LIFO batch:31
[ 0.000000] HighMem zone: 34738 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] e820: [mem 0x40000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 18 pages/cpu @f5f06000 s41320 r0 d32408 u73728
[ 0.000000] pcpu-alloc: s41320 r0 d32408 u73728 alloc=18*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259968
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.2.0+ root=UUID=96c96a61-8615-4715-86d0-09cb8c62638c ro single
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000377fe:0003ffb0)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 1004604K/1047864K available (5476K kernel code, 550K rwdata, 2080K rodata, 520K init, 8152K bss, 43260K reserved, 0K cma-reserved, 138952K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc17ee000 - 0xc1870000 ( 520 kB)
.data : 0xc155957a - 0xc17ecb00 (2637 kB)
.text : 0xc1000000 - 0xc155957a (5477 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Running RCU self tests
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU lockdep checking is enabled.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
[ 0.000000] NR_IRQS:2304 nr_irqs:440 16
[ 0.000000] CPU 0 irqstacks, hard=f5816000 soft=f5818000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 32768
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 65536
[ 0.000000] ... CHAINHASH_SIZE: 32768
[ 0.000000] memory used by lock dependency info: 4911 kB
[ 0.000000] per task-struct memory footprint: 1344 bytes
[ 0.000000] ------------------------
[ 0.000000] | Locking API testsuite:
[ 0.000000] ----------------------------------------------------------------------------
[ 0.000000] | spin |wlock |rlock |mutex | wsem | rsem |
[ 0.000000] --------------------------------------------------------------------------
[ 0.000000] A-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000000] A-B-B-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000000] A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000000] A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000000] A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000000] A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000000] A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000000] double unlock: ok | ok | ok | ok | ok | ok |
[ 0.000000] initialize held: ok | ok | ok | ok | ok | ok |
[ 0.000000] bad unlock order: ok | ok | ok | ok | ok | ok |
[ 0.000000] --------------------------------------------------------------------------
[ 0.000000] recursive read-lock: | ok | | ok |
[ 0.000000] recursive read-lock #2: | ok | | ok |
[ 0.000000] mixed read-write-lock: | ok | | ok |
[ 0.000000] mixed write-read-lock: | ok | | ok |
[ 0.000000] --------------------------------------------------------------------------
[ 0.000000] hard-irqs-on + irq-safe-A/12: ok | ok | ok |
[ 0.000000] soft-irqs-on + irq-safe-A/12: ok | ok | ok |
[ 0.000000] hard-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 0.000000] soft-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 0.000000] sirq-safe-A => hirqs-on/12: ok | ok | ok |
[ 0.000000] sirq-safe-A => hirqs-on/21: ok | ok | ok |
[ 0.000000] hard-safe-A + irqs-on/12: ok | ok | ok |
[ 0.000000] soft-safe-A + irqs-on/12: ok | ok | ok |
[ 0.000000] hard-safe-A + irqs-on/21: ok | ok | ok |
[ 0.000000] soft-safe-A + irqs-on/21: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #1/132: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/132: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #1/213: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/213: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #1/231: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/231: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #1/312: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/312: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #1/321: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/321: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #2/123: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #2/123: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #2/132: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #2/132: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #2/213: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #2/213: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #2/231: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #2/231: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #2/312: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #2/312: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #2/321: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #2/321: ok | ok | ok |
[ 0.000000] hard-irq lock-inversion/123: ok | ok | ok |
[ 0.000000] soft-irq lock-inversion/123: ok | ok | ok |
[ 0.000000] hard-irq lock-inversion/132: ok | ok | ok |
[ 0.000000] soft-irq lock-inversion/132: ok | ok | ok |
[ 0.000000] hard-irq lock-inversion/213: ok | ok | ok |
[ 0.000000] soft-irq lock-inversion/213: ok | ok | ok |
[ 0.000000] hard-irq lock-inversion/231: ok | ok | ok |
[ 0.000000] soft-irq lock-inversion/231: ok | ok | ok |
[ 0.000000] hard-irq lock-inversion/312: ok | ok | ok |
[ 0.000000] soft-irq lock-inversion/312: ok | ok | ok |
[ 0.000000] hard-irq lock-inversion/321: ok | ok | ok |
[ 0.000000] soft-irq lock-inversion/321: ok | ok | ok |
[ 0.000000] hard-irq read-recursion/123: ok |
[ 0.000000] soft-irq read-recursion/123: ok |
[ 0.000000] hard-irq read-recursion/132: ok |
[ 0.000000] soft-irq read-recursion/132: ok |
[ 0.000000] hard-irq read-recursion/213: ok |
[ 0.000000] soft-irq read-recursion/213: ok |
[ 0.000000] hard-irq read-recursion/231: ok |
[ 0.000000] soft-irq read-recursion/231: ok |
[ 0.000000] hard-irq read-recursion/312: ok |
[ 0.000000] soft-irq read-recursion/312: ok |
[ 0.000000] hard-irq read-recursion/321: ok |
[ 0.000000] soft-irq read-recursion/321: ok |
[ 0.000000] --------------------------------------------------------------------------
[ 0.000000] | Wound/wait tests |
[ 0.000000] ---------------------
[ 0.000000] ww api failures: ok | ok | ok |
[ 0.000000] ww contexts mixing: ok | ok |
[ 0.000000] finishing ww context: ok | ok | ok | ok |
[ 0.000000] locking mismatches: ok | ok | ok |
[ 0.000000] EDEADLK handling: ok | ok | ok | ok | ok | ok | ok | ok | ok | ok |
[ 0.000000] spinlock nest unlocked: ok |
[ 0.000000] -----------------------------------------------------
[ 0.000000] |block | try |context|
[ 0.000000] -----------------------------------------------------
[ 0.000000] context: ok | ok | ok |
[ 0.000000] try: ok | ok | ok |
[ 0.000000] block: ok | ok | ok |
[ 0.000000] spinlock: ok | ok | ok |
[ 0.000000] -------------------------------------------------------
[ 0.000000] Good, all 253 testcases passed! |
[ 0.000000] ---------------------------------
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2000.131 MHz processor
[ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[ 0.008117] Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.26 BogoMIPS (lpj=8000524)
[ 0.008233] pid_max: default: 32768 minimum: 301
[ 0.008342] ACPI: Core revision 20150818
[ 0.018815] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.019036] Security Framework initialized
[ 0.019095] AppArmor: AppArmor disabled by boot time parameter
[ 0.019153] Yama: becoming mindful.
[ 0.019277] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.019337] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.020742] Initializing cgroup subsys blkio
[ 0.020831] Initializing cgroup subsys memory
[ 0.020911] Initializing cgroup subsys devices
[ 0.021000] Initializing cgroup subsys freezer
[ 0.021115] Initializing cgroup subsys net_cls
[ 0.021177] Initializing cgroup subsys perf_event
[ 0.021238] Initializing cgroup subsys net_prio
[ 0.021332] mce: CPU supports 5 MCE banks
[ 0.021423] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.021481] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
[ 0.027270] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.027949] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.064000] smpboot: CPU0: AMD Athlon(tm) 64 Processor 3200+ (fam: 0f, model: 2f, stepping: 02)
[ 0.064000] Performance Events: AMD PMU driver.
[ 0.064000] ... version: 0
[ 0.064000] ... bit width: 48
[ 0.064000] ... generic registers: 4
[ 0.064000] ... value mask: 0000ffffffffffff
[ 0.064000] ... max period: 00007fffffffffff
[ 0.064000] ... fixed-purpose events: 0
[ 0.064000] ... event mask: 000000000000000f
[ 0.084063] x86: Booted up 1 node, 1 CPUs
[ 0.084124] smpboot: Total of 1 processors activated (4000.26 BogoMIPS)
[ 0.084889] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.089012] devtmpfs: initialized
[ 0.092175] PM: Registering ACPI NVS region [mem 0x3ffbe000-0x3ffdffff] (139264 bytes)
[ 0.092516] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.096120] pinctrl core: initialized pinctrl subsystem
[ 0.097193] NET: Registered protocol family 16
[ 0.108042] cpuidle: using governor ladder
[ 0.120018] cpuidle: using governor menu
[ 0.120081] node 0 link 0: io port [1000, ffffff]
[ 0.120085] TOM: 0000000040000000 aka 1024M
[ 0.120143] node 0 link 0: mmio [a0000, bffff]
[ 0.120148] node 0 link 0: mmio [40000000, ffffffff]
[ 0.120153] bus: [bus 00-ff] on node 0 link 0
[ 0.120155] bus: 00 [io 0x0000-0xffff]
[ 0.120158] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.120160] bus: 00 [mem 0x40000000-0xffffffff]
[ 0.120277] ACPI: bus type PCI registered
[ 0.120336] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.121261] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 0.121320] PCI: Using configuration type 1 for base access
[ 0.156184] ACPI: Added _OSI(Module Device)
[ 0.156245] ACPI: Added _OSI(Processor Device)
[ 0.156303] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.156360] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.164649] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.170974] ACPI: Interpreter enabled
[ 0.171053] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150818/hwxface-580)
[ 0.171210] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20150818/hwxface-580)
[ 0.171420] ACPI: (supports S0 S1 S4 S5)
[ 0.171477] ACPI: Using IOAPIC for interrupt routing
[ 0.171624] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.196417] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.196488] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ 0.196652] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.196913] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7 window] (ignored)
[ 0.196917] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff window] (ignored)
[ 0.196921] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff window] (ignored)
[ 0.196924] acpi PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff window] (ignored)
[ 0.196927] acpi PNP0A03:00: host bridge window [mem 0x40000000-0xffffffff window] (ignored)
[ 0.196931] PCI: root bus 00: hardware-probed resources
[ 0.196996] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.198181] PCI host bridge to bus 0000:00
[ 0.198241] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.198300] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.198360] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.198420] pci_bus 0000:00: root bus resource [mem 0x40000000-0xffffffff]
[ 0.198571] pci 0000:00:00.0: [1106:0204] type 00 class 0x060000
[ 0.198604] pci 0000:00:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
[ 0.199302] pci 0000:00:00.1: [1106:1204] type 00 class 0x060000
[ 0.199676] pci 0000:00:00.2: [1106:2204] type 00 class 0x060000
[ 0.200035] pci 0000:00:00.3: [1106:3204] type 00 class 0x060000
[ 0.200409] pci 0000:00:00.4: [1106:4204] type 00 class 0x060000
[ 0.200759] pci 0000:00:00.7: [1106:7204] type 00 class 0x060000
[ 0.201110] pci 0000:00:01.0: [1106:b188] type 01 class 0x060400
[ 0.201180] pci 0000:00:01.0: supports D1
[ 0.201493] pci 0000:00:0f.0: [1106:0571] type 00 class 0x01018a
[ 0.201562] pci 0000:00:0f.0: reg 0x20: [io 0xfc00-0xfc0f]
[ 0.201590] pci 0000:00:0f.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.201651] pci 0000:00:0f.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.201711] pci 0000:00:0f.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.201772] pci 0000:00:0f.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.202127] pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300
[ 0.202194] pci 0000:00:10.0: reg 0x20: [io 0xec00-0xec1f]
[ 0.202243] pci 0000:00:10.0: supports D1 D2
[ 0.202247] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.202531] pci 0000:00:10.0: System wakeup disabled by ACPI
[ 0.202770] pci 0000:00:10.1: [1106:3038] type 00 class 0x0c0300
[ 0.202837] pci 0000:00:10.1: reg 0x20: [io 0xe880-0xe89f]
[ 0.202887] pci 0000:00:10.1: supports D1 D2
[ 0.202890] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.203051] pci 0000:00:10.1: System wakeup disabled by ACPI
[ 0.203291] pci 0000:00:10.2: [1106:3038] type 00 class 0x0c0300
[ 0.203359] pci 0000:00:10.2: reg 0x20: [io 0xe800-0xe81f]
[ 0.203408] pci 0000:00:10.2: supports D1 D2
[ 0.203412] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.203572] pci 0000:00:10.2: System wakeup disabled by ACPI
[ 0.203811] pci 0000:00:10.3: [1106:3038] type 00 class 0x0c0300
[ 0.203877] pci 0000:00:10.3: reg 0x20: [io 0xe480-0xe49f]
[ 0.203927] pci 0000:00:10.3: supports D1 D2
[ 0.203930] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.204102] pci 0000:00:10.3: System wakeup disabled by ACPI
[ 0.204345] pci 0000:00:10.4: [1106:3104] type 00 class 0x0c0320
[ 0.204379] pci 0000:00:10.4: reg 0x10: [mem 0xff6ffc00-0xff6ffcff]
[ 0.204469] pci 0000:00:10.4: supports D1 D2
[ 0.204472] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.204634] pci 0000:00:10.4: System wakeup disabled by ACPI
[ 0.204878] pci 0000:00:11.0: [1106:3287] type 00 class 0x060100
[ 0.205301] pci 0000:00:11.7: [1106:287e] type 00 class 0x060000
[ 0.205662] pci 0000:00:12.0: [1106:3065] type 00 class 0x020000
[ 0.205693] pci 0000:00:12.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.205706] pci 0000:00:12.0: reg 0x14: [mem 0xff6ff800-0xff6ff8ff]
[ 0.205785] pci 0000:00:12.0: supports D1 D2
[ 0.205788] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.205950] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.206193] pci 0000:00:13.0: [1106:287b] type 01 class 0x060400
[ 0.206518] pci 0000:00:13.1: [1106:287a] type 01 class 0x060400
[ 0.206721] pci 0000:00:13.1: System wakeup disabled by ACPI
[ 0.206976] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[ 0.207282] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[ 0.207584] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[ 0.207883] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[ 0.208312] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.208374] pci 0000:00:01.0: bridge window [io 0xa000-0xcfff]
[ 0.208380] pci 0000:00:01.0: bridge window [mem 0xff400000-0xff4fffff]
[ 0.208386] pci 0000:00:01.0: bridge window [mem 0x7ff00000-0xbfefffff pref]
[ 0.208404] pci 0000:01:00.0: [1002:4153] type 00 class 0x030000
[ 0.208431] pci 0000:01:00.0: reg 0x10: [mem 0xa0000000-0xafffffff pref]
[ 0.208442] pci 0000:01:00.0: reg 0x14: [io 0xc000-0xc0ff]
[ 0.208452] pci 0000:01:00.0: reg 0x18: [mem 0xff4f0000-0xff4fffff]
[ 0.208484] pci 0000:01:00.0: reg 0x30: [mem 0xff4c0000-0xff4dffff pref]
[ 0.208518] pci 0000:01:00.0: supports D1 D2
[ 0.208678] pci 0000:01:00.1: [1002:4173] type 00 class 0x038000
[ 0.208700] pci 0000:01:00.1: reg 0x10: [mem 0x90000000-0x9fffffff pref]
[ 0.208710] pci 0000:01:00.1: reg 0x14: [mem 0xff4e0000-0xff4effff]
[ 0.208777] pci 0000:01:00.1: supports D1 D2
[ 0.209127] pci 0000:00:13.0: PCI bridge to [bus 02-04]
[ 0.209212] pci 0000:02:00.0: [1106:287c] type 01 class 0x060400
[ 0.209290] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.209354] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.209593] pci 0000:02:00.1: [1106:287d] type 01 class 0x060400
[ 0.209671] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
[ 0.209899] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.210144] pci 0000:02:00.0: PCI bridge to [bus 03]
[ 0.210340] pci 0000:02:00.1: PCI bridge to [bus 04]
[ 0.210540] pci 0000:00:13.1: PCI bridge to [bus 05]
[ 0.210601] pci 0000:00:13.1: bridge window [io 0xd000-0xdfff]
[ 0.210607] pci 0000:00:13.1: bridge window [mem 0xff500000-0xff5fffff]
[ 0.210649] pci 0000:05:0b.0: [1102:0004] type 00 class 0x040100
[ 0.210678] pci 0000:05:0b.0: reg 0x10: [io 0xd800-0xd83f]
[ 0.210770] pci 0000:05:0b.0: supports D1 D2
[ 0.210929] pci 0000:05:0b.1: [1102:7003] type 00 class 0x098000
[ 0.210956] pci 0000:05:0b.1: reg 0x10: [io 0xdc00-0xdc07]
[ 0.211047] pci 0000:05:0b.1: supports D1 D2
[ 0.211207] pci 0000:05:0b.2: [1102:4001] type 00 class 0x0c0010
[ 0.211238] pci 0000:05:0b.2: reg 0x10: [mem 0xff5ef800-0xff5effff]
[ 0.211251] pci 0000:05:0b.2: reg 0x14: [mem 0xff5e8000-0xff5ebfff]
[ 0.211338] pci 0000:05:0b.2: supports D1 D2
[ 0.211341] pci 0000:05:0b.2: PME# supported from D0 D1 D2 D3hot
[ 0.211541] pci 0000:05:0c.0: [1044:a400] type 00 class 0x010000
[ 0.211562] pci 0000:05:0c.0: reg 0x10: [io 0xd880-0xd89f]
[ 0.211624] pci 0000:05:0c.0: reg 0x30: [mem 0xff5f0000-0xff5f7fff pref]
[ 0.211838] pci_bus 0000:00: on NUMA node 0
[ 0.214581] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.215322] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.216048] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.216761] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.217476] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.218284] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.219093] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.219901] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.221551] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.221612] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.221688] vgaarb: loaded
[ 0.221743] vgaarb: bridge control possible 0000:01:00.0
[ 0.224044] PCI: Using ACPI for IRQ routing
[ 0.224105] PCI: pci_cache_line_size set to 64 bytes
[ 0.224210] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.224222] e820: reserve RAM buffer [mem 0x3ffb0000-0x3fffffff]
[ 0.225539] clocksource: Switched to clocksource refined-jiffies
[ 0.245684] pnp: PnP ACPI init
[ 0.246091] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.247338] pnp 00:01: [dma 3]
[ 0.247684] pnp 00:01: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.248035] system 00:02: [io 0x0290-0x0297] has been reserved
[ 0.248179] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.248604] system 00:03: [io 0x03e0-0x03e7] has been reserved
[ 0.248666] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.248727] system 00:03: [io 0x0800-0x087f] has been reserved
[ 0.248787] system 00:03: [io 0x0400-0x041f] has been reserved
[ 0.248849] system 00:03: [mem 0xff780000-0xffffffff] has been reserved
[ 0.248910] system 00:03: [mem 0xf0000000-0xf7ffffff] has been reserved
[ 0.248975] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.249258] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.249321] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.249386] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.249572] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.249802] pnp 00:06: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.250422] pnp 00:07: [dma 0 disabled]
[ 0.250600] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.250816] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.250882] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.251515] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.251579] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.251641] system 00:09: [mem 0x00100000-0x3fffffff] could not be reserved
[ 0.251706] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.252075] pnp: PnP ACPI: found 10 devices
[ 0.294783] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.294886] clocksource: Switched to clocksource acpi_pm
[ 0.294985] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.295046] pci 0000:00:01.0: bridge window [io 0xa000-0xcfff]
[ 0.295110] pci 0000:00:01.0: bridge window [mem 0xff400000-0xff4fffff]
[ 0.295110] pci 0000:00:01.0: bridge window [mem 0x7ff00000-0xbfefffff pref]
[ 0.295110] pci 0000:02:00.0: PCI bridge to [bus 03]
[ 0.295110] pci 0000:02:00.1: PCI bridge to [bus 04]
[ 0.295110] pci 0000:00:13.0: PCI bridge to [bus 02-04]
[ 0.295110] pci 0000:00:13.1: PCI bridge to [bus 05]
[ 0.295110] pci 0000:00:13.1: bridge window [io 0xd000-0xdfff]
[ 0.295110] pci 0000:00:13.1: bridge window [mem 0xff500000-0xff5fffff]
[ 0.295110] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.295110] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.295110] pci_bus 0000:00: resource 6 [mem 0x40000000-0xffffffff]
[ 0.295110] pci_bus 0000:01: resource 0 [io 0xa000-0xcfff]
[ 0.295110] pci_bus 0000:01: resource 1 [mem 0xff400000-0xff4fffff]
[ 0.295110] pci_bus 0000:01: resource 2 [mem 0x7ff00000-0xbfefffff pref]
[ 0.295110] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
[ 0.295110] pci_bus 0000:05: resource 1 [mem 0xff500000-0xff5fffff]
[ 0.295110] NET: Registered protocol family 2
[ 0.295110] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.295110] TCP bind hash table entries: 8192 (order: 6, 294912 bytes)
[ 0.295639] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.295816] UDP hash table entries: 512 (order: 3, 40960 bytes)
[ 0.295955] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
[ 0.296350] NET: Registered protocol family 1
[ 0.296447] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[ 0.296529] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[ 0.296758] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.296784] PCI: CLS 64 bytes, default 64
[ 0.297139] Unpacking initramfs...
[ 0.797009] Freeing initrd memory: 15676K (f6152000 - f70a1000)
[ 0.797217] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1cd4a9e1deb, max_idle_ns: 440795254256 ns
[ 0.797362] microcode: AMD CPU family 0xf not supported
[ 0.798543] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.798703] audit: initializing netlink subsys (disabled)
[ 0.798872] audit: type=2000 audit(1441606077.795:1): initialized
[ 0.799877] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.800391] VFS: Disk quotas dquot_6.6.0
[ 0.800481] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.803296] bounce: pool size: 64 pages
[ 0.803388] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.807646] io scheduler noop registered
[ 0.807705] io scheduler deadline registered
[ 0.807786] io scheduler cfq registered (default)
[ 0.808445] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.808528] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.808711] GHES: HEST is not enabled!
[ 0.808933] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.829832] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.831668] Linux agpgart interface v0.103
[ 0.831762] agpgart-amd64 0000:00:00.0: AGP bridge [1106/0204]
[ 0.838896] agpgart-amd64 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.839781] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.840573] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.841194] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.841826] mousedev: PS/2 mouse device common for all mice
[ 0.842313] rtc_cmos 00:00: RTC can wake from S4
[ 0.842845] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 0.842944] rtc_cmos 00:00: alarms up to one year, y3k, 114 bytes nvram
[ 0.843414] NET: Registered protocol family 10
[ 0.848435] mip6: Mobile IPv6
[ 0.848525] NET: Registered protocol family 17
[ 0.848593] mpls_gso: MPLS GSO support
[ 0.849132] Using IPI No-Shortcut mode
[ 0.849745] registered taskstats version 1
[ 0.859345] rtc_cmos 00:00: setting system clock to 2015-09-07 06:07:58 UTC (1441606078)
[ 0.859698] PM: Hibernation image not present or could not be loaded.
[ 0.860754] Freeing unused kernel memory: 520K (c17ee000 - c1870000)
[ 0.860936] Write protecting the kernel text: 5480k
[ 0.861152] Write protecting the kernel read-only data: 2084k
[ 0.864816] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.953937] random: systemd-udevd urandom read with 0 bits of entropy available
[ 1.101817] SCSI subsystem initialized
[ 1.119147] ACPI: bus type USB registered
[ 1.119328] usbcore: registered new interface driver usbfs
[ 1.119522] usbcore: registered new interface driver hub
[ 1.120856] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker
[ 1.122434] via-rhine 0000:00:12.0 eth0: VIA Rhine II at 0x1e000, 00:13:d4:cc:9b:57, IRQ 23
[ 1.123280] via-rhine 0000:00:12.0 eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1
[ 1.129417] usbcore: registered new device driver usb
[ 1.130447] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.130861] ehci-pci: EHCI PCI platform driver
[ 1.131832] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.135549] ehci-pci 0000:00:10.4: EHCI Host Controller
[ 1.135999] ehci-pci 0000:00:10.4: new USB bus registered, assigned bus number 1
[ 1.137721] ehci-pci 0000:00:10.4: debug port 1
[ 1.138014] ehci-pci 0000:00:10.4: irq 22, io mem 0xff6ffc00
[ 1.139763] libata version 3.00 loaded.
[ 1.148120] ehci-pci 0000:00:10.4: USB 2.0 started, EHCI 1.00
[ 1.149264] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.149327] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.149398] usb usb1: Product: EHCI Host Controller
[ 1.149455] usb usb1: Manufacturer: Linux 4.2.0+ ehci_hcd
[ 1.149513] usb usb1: SerialNumber: 0000:00:10.4
[ 1.151307] hub 1-0:1.0: USB hub found
[ 1.152477] hub 1-0:1.0: 8 ports detected
[ 1.162404] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 1.162500] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 1.162580] uhci_hcd 0000:00:10.0: detected 2 ports
[ 1.162686] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000ec00
[ 1.163034] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.163095] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.163166] usb usb2: Product: UHCI Host Controller
[ 1.163223] usb usb2: Manufacturer: Linux 4.2.0+ uhci_hcd
[ 1.163282] usb usb2: SerialNumber: 0000:00:10.0
[ 1.163905] hub 2-0:1.0: USB hub found
[ 1.163987] hub 2-0:1.0: 2 ports detected
[ 1.164782] pata_via 0000:00:0f.0: version 0.3.4
[ 1.172705] scsi host0: pata_via
[ 1.178602] scsi host1: pata_via
[ 1.178909] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 1.178970] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 1.179937] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 1.180126] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 1.180210] uhci_hcd 0000:00:10.1: detected 2 ports
[ 1.180293] uhci_hcd 0000:00:10.1: irq 22, io base 0x0000e880
[ 1.180522] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.180583] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.180654] usb usb3: Product: UHCI Host Controller
[ 1.180711] usb usb3: Manufacturer: Linux 4.2.0+ uhci_hcd
[ 1.180769] usb usb3: SerialNumber: 0000:00:10.1
[ 1.181390] hub 3-0:1.0: USB hub found
[ 1.181470] hub 3-0:1.0: 2 ports detected
[ 1.182250] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 1.182323] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[ 1.182401] uhci_hcd 0000:00:10.2: detected 2 ports
[ 1.182502] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e800
[ 1.183194] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.183256] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.183327] usb usb4: Product: UHCI Host Controller
[ 1.183384] usb usb4: Manufacturer: Linux 4.2.0+ uhci_hcd
[ 1.183442] usb usb4: SerialNumber: 0000:00:10.2
[ 1.185338] hub 4-0:1.0: USB hub found
[ 1.185935] hub 4-0:1.0: 2 ports detected
[ 1.188759] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 1.188838] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[ 1.188917] uhci_hcd 0000:00:10.3: detected 2 ports
[ 1.189023] uhci_hcd 0000:00:10.3: irq 23, io base 0x0000e480
[ 1.191742] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.191808] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.191879] usb usb5: Product: UHCI Host Controller
[ 1.191936] usb usb5: Manufacturer: Linux 4.2.0+ uhci_hcd
[ 1.191994] usb usb5: SerialNumber: 0000:00:10.3
[ 1.192433] firewire_ohci 0000:05:0b.2: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[ 1.195716] hub 5-0:1.0: USB hub found
[ 1.196493] hub 5-0:1.0: 2 ports detected
[ 1.353461] ata1.00: ATA-8: WDC WD3200AAJB-00WGA0, 00.02C01, max UDMA/100
[ 1.353528] ata1.00: 625142448 sectors, multi 16: LBA48
[ 1.360693] ata1.00: configured for UDMA/100
[ 1.366180] scsi 0:0:0:0: Direct-Access ATA WDC WD3200AAJB-0 2C01 PQ: 0 ANSI: 5
[ 1.468048] usb 1-5: new high-speed USB device number 2 using ehci-pci
[ 1.540360] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-4163B, A103, max UDMA/33
[ 1.540801] ata2.01: HPA detected: current 66055248, native 78242976
[ 1.540861] ata2.01: ATA-6: SAMSUNG SP4002H, QU100-57, max UDMA/100
[ 1.540921] ata2.01: 66055248 sectors, multi 16: LBA
[ 1.540983] ata2.01: limited to UDMA/33 due to 40-wire cable
[ 1.556227] ata2.00: configured for UDMA/33
[ 1.572621] ata2.01: configured for UDMA/33
[ 1.596085] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4163B A103 PQ: 0 ANSI: 5
[ 1.610163] usb 1-5: New USB device found, idVendor=13fe, idProduct=1e23
[ 1.610228] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.610290] usb 1-5: Product: STORE N GO
[ 1.610346] usb 1-5: Manufacturer: Verbatim
[ 1.610403] usb 1-5: SerialNumber: 078A18B40293
[ 1.612059] scsi 1:0:1:0: Direct-Access ATA SAMSUNG SP4002H 0-57 PQ: 0 ANSI: 5
[ 1.621633] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.621870] sd 0:0:0:0: [sda] Write Protect is off
[ 1.621931] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.621999] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.625073] sd 1:0:1:0: [sdb] 66055248 512-byte logical blocks: (33.8 GB/31.4 GiB)
[ 1.625306] sd 1:0:1:0: [sdb] Write Protect is off
[ 1.625366] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.625434] sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.644479] uas: Unknown symbol usb_stor_adjust_quirks (err 0)
[ 1.644595] uas: Unknown symbol usb_stor_sense_invalidCDB (err 0)
[ 1.658638] sr 1:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.658717] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.660647] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.662318] sda: sda1 sda2 < sda5 sda6 sda7 >
[ 1.664814] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.681029] sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 > sdb3
[ 1.681524] sdb: p3 size 13333950 extends beyond EOD, enabling native capacity
[ 1.683155] ata2: soft resetting link
[ 1.693039] firewire_core 0000:05:0b.2: created device fw0: GUID 00023c0153000612, S400
[ 1.852365] ata2.01: n_sectors mismatch 66055248 != 78242976
[ 1.852429] ata2.01: new n_sectors matches native, probably late HPA unlock, n_sectors updated
[ 1.876237] ata2.00: configured for UDMA/33
[ 1.892634] ata2.01: configured for UDMA/33
[ 1.894835] ata2: EH complete
[ 1.905963] sd 1:0:1:0: [sdb] 78242976 512-byte logical blocks: (40.0 GB/37.3 GiB)
[ 1.918092] sdb: detected capacity change from 33820286976 to 40060403712
[ 1.989814] sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 > sdb3
[ 1.993592] sdb: detected capacity change from 0 to 40060403712
[ 1.993969] sd 1:0:1:0: [sdb] Attached SCSI disk
[ 2.790065] random: nonblocking pool is initialized
[ 4.144472] floppy0: no floppy controllers found
[ 4.175402] PM: Starting manual resume from disk
[ 4.175487] PM: Hibernation image partition 8:5 present
[ 4.175490] PM: Looking for hibernation image.
[ 4.176370] PM: Image not found (code -22)
[ 4.176374] PM: Hibernation image not present or could not be loaded.
[ 4.183875] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
[ 4.183882] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff]
[ 4.183886] PM: Basic memory bitmaps created
[ 4.184651] PM: Basic memory bitmaps freed
[ 5.327921] EXT4-fs (sda7): mounting ext3 file system using the ext4 subsystem
[ 5.354148] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 9.628573] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 9.628660] ACPI: Sleep Button [SLPB]
[ 9.629061] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 9.629136] ACPI: Power Button [PWRB]
[ 9.629395] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 9.629469] ACPI: Power Button [PWRF]
[ 9.799583] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.899927] parport_pc 00:01: reported by Plug and Play ACPI
[ 9.901635] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 9.903768] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 9.903976] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 9.904304] sd 1:0:1:0: Attached scsi generic sg2 type 0
[ 10.314531] gameport gameport0: EMU10K1 is pci0000:05:0b.1/gameport0, io 0xdc00, speed 1209kHz
[ 10.884508] EDAC MC: Ver: 3.0.0
[ 10.916241] MCE: In-kernel MCE decoding enabled.
[ 10.949284] AMD64 EDAC driver v3.4.0
[ 10.949413] EDAC amd64: DRAM ECC enabled.
[ 10.949472] EDAC amd64: K8 revE or earlier detected (node 0).
[ 10.950828] EDAC MC0: Giving out device to module amd64_edac controller K8: DEV 0000:00:18.2 (INTERRUPT)
[ 10.951258] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
[ 10.951333] EDAC amd64: amd64_edac on 32-bit is unsupported. USE AT YOUR OWN RISK!
[ 11.029289] [drm] Initialized drm 1.1.0 20060810
[ 11.033973] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 11.175461] Error: Driver 'pcspkr' is already registered, aborting...
[ 11.511350] powernow_k8: fid 0xc (2000 MHz), vid 0x6
[ 11.511414] powernow_k8: fid 0xa (1800 MHz), vid 0x8
[ 11.511472] powernow_k8: fid 0x2 (1000 MHz), vid 0x12
[ 11.512802] powernow_k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ (1 cpu cores) (version 2.20.00)
[ 11.938963] ppdev: user-space parallel port driver
[ 12.222070] snd_emu10k1 0000:05:0b.0: Installing spdif_bug patch: SB Audigy 2 ZS [SB0350]
[ 12.345290] [drm] radeon kernel modesetting enabled.
[ 12.368418] [drm] initializing kernel modesetting (RV350 0x1002:0x4153 0x1458:0x4050).
[ 12.368560] [drm] register mmio base: 0xFF4F0000
[ 12.368617] [drm] register mmio size: 65536
[ 12.373626] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
[ 12.373717] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
[ 12.374677] radeon 0000:01:00.0: putting AGP V3 device into 8x mode
[ 12.374780] radeon 0000:01:00.0: GTT: 256M 0xD0000000 - 0xDFFFFFFF
[ 12.374842] [drm] Generation 2 PCI interface, using max accessible memory
[ 12.374904] radeon 0000:01:00.0: VRAM: 256M 0x00000000A0000000 - 0x00000000AFFFFFFF (256M used)
[ 12.375033] [drm] Detected VRAM RAM=256M, BAR=256M
[ 12.378052] [drm] RAM width 128bits DDR
[ 12.384378] [TTM] Zone kernel: Available graphics memory: 440924 kiB
[ 12.384445] [TTM] Zone highmem: Available graphics memory: 510400 kiB
[ 12.384504] [TTM] Initializing pool allocator
[ 12.384611] [TTM] Initializing DMA pool allocator
[ 12.385865] [drm] radeon: 256M of VRAM memory ready
[ 12.385926] [drm] radeon: 256M of GTT memory ready.
[ 12.386167] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
[ 12.412230] radeon 0000:01:00.0: WB disabled
[ 12.412469] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000d0000000 and cpu addr 0xf8022000
[ 12.412550] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 12.412715] [drm] Driver supports precise vblank timestamp query.
[ 12.413263] [drm] radeon: irq initialized.
[ 12.413512] [drm] Loading R300 Microcode
[ 12.481117] [drm] radeon: ring at 0x00000000D0001000
[ 12.481329] [drm] ring test succeeded in 0 usecs
[ 12.482135] [drm] ib test succeeded in 0 usecs
[ 12.497774] [drm] Radeon Display Connectors
[ 12.497837] [drm] Connector 0:
[ 12.497892] [drm] VGA-1
[ 12.497948] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 12.498006] [drm] Encoders:
[ 12.498060] [drm] CRT1: INTERNAL_DAC1
[ 12.498117] [drm] Connector 1:
[ 12.498172] [drm] DVI-I-1
[ 12.498226] [drm] HPD1
[ 12.498280] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 12.498338] [drm] Encoders:
[ 12.498392] [drm] CRT2: INTERNAL_DAC2
[ 12.498447] [drm] DFP1: INTERNAL_TMDS1
[ 12.498503] [drm] Connector 2:
[ 12.498557] [drm] SVIDEO-1
[ 12.498611] [drm] Encoders:
[ 12.498665] [drm] TV1: INTERNAL_DAC2
[ 12.547688] usb-storage 1-5:1.0: USB Mass Storage device detected
[ 12.552142] scsi host2: usb-storage 1-5:1.0
[ 12.553109] usbcore: registered new interface driver usb-storage
[ 12.608232] usbcore: registered new interface driver uas
[ 12.888672] floppy0: no floppy controllers found
[ 12.951298] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input6
[ 12.982549] [drm] fb mappable at 0xA0040000
[ 12.982612] [drm] vram apper at 0xA0000000
[ 12.982669] [drm] size 8294400
[ 12.982723] [drm] fb depth is 24
[ 12.982778] [drm] pitch is 7680
[ 12.988756] fbcon: radeondrmfb (fb0) is primary device
[ 13.212056] Console: switching to colour frame buffer device 240x67
[ 13.398700] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 13.408070] [drm] Initialized radeon 2.43.0 20080528 for 0000:01:00.0 on minor 0
[ 13.560481] scsi 2:0:0:0: Direct-Access Verbatim STORE N GO 5.00 PQ: 0 ANSI: 0 CCS
[ 13.574447] sd 2:0:0:0: [sdc] 3911680 512-byte logical blocks: (2.00 GB/1.86 GiB)
[ 13.575810] sd 2:0:0:0: [sdc] Write Protect is off
[ 13.576334] sd 2:0:0:0: [sdc] Mode Sense: 23 00 00 00
[ 13.577063] sd 2:0:0:0: [sdc] No Caching mode page found
[ 13.577550] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[ 13.580471] sd 2:0:0:0: Attached scsi generic sg3 type 0
[ 13.726747] sdc: sdc1
[ 13.730429] sd 2:0:0:0: [sdc] Attached SCSI removable disk
[ 15.281194] ata1.00: configured for UDMA/100
[ 15.281581] ata1: EH complete
[ 15.352301] ata2.00: configured for UDMA/33
[ 15.360440] ata2.01: configured for UDMA/33
[ 15.360827] ata2: EH complete
[ 16.468441] Adding 2200868k swap on /dev/sda5. Priority:-1 extents:1 across:2200868k
[ 16.571690] EXT4-fs (sda7): re-mounted. Opts: (null)
[ 17.046000] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro,data=ordered
[ 18.087475] lp0: using parport0 (interrupt-driven).
[ 18.250095] Loading iSCSI transport class v2.0-870.
[ 18.316699] iscsi: registered transport (tcp)
[ 18.515619] iscsi: registered transport (iser)
[ 18.636136] fuse init (API version 7.23)
[ 18.845865] tun: Universal TUN/TAP device driver, 1.6
[ 18.874609] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 18.952150] w83627ehf: Found W83627EHG chip at 0x290
[ 18.983526] ACPI Warning: SystemIO range 0x0000000000000295-0x0000000000000296 conflicts with OpRegion 0x0000000000000290-0x0000000000000299 (\_SB_.PCI0.SBRG.SIOR.HWRE) (20150818/utaddress-254)
[ 19.012043] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 50.964536] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
[ 51.023170] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 51.107301] FAT-fs (sda6): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 51.196786] FAT-fs (sdc1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[-- Attachment #3: 2015090715irqpoll.txt --]
[-- Type: text/plain, Size: 52866 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.2.0+ (root@victoria) (gcc version 5.2.1 20150903 (Debian 5.2.1-16) ) #29 SMP PREEMPT Mon Sep 7 07:10:45 ACST 2015
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'lazy' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffaffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003ffb0000-0x000000003ffbdfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000003ffbe000-0x000000003ffdffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000003ffe0000-0x000000003fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff780000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: System manufacturer System Product Name/A8V-MX, BIOS 0503 12/06/2005
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x3ffb0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
[ 0.000000] 1 base 00D0000000 mask FFF0000000 write-combining
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x023fffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x35c00000-0x35ffffff]
[ 0.000000] [mem 0x35c00000-0x35ffffff] page 4M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x35bfffff]
[ 0.000000] [mem 0x00100000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x35bfffff] page 4M
[ 0.000000] init_memory_mapping: [mem 0x36000000-0x377fdfff]
[ 0.000000] [mem 0x36000000-0x373fffff] page 4M
[ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
[ 0.000000] BRK [0x02075000, 0x02075fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x36152000-0x370a0fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FAC60 000024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 0x000000003FFB0100 00003C (v01 A M I OEMXSDT 12000506 MSFT 00000097)
[ 0.000000] ACPI: FACP 0x000000003FFB0290 0000F4 (v03 A M I OEMFACP 12000506 MSFT 00000097)
[ 0.000000] ACPI: DSDT 0x000000003FFB03F0 0046F0 (v01 A0347 A0347001 00000001 INTL 02002026)
[ 0.000000] ACPI: FACS 0x000000003FFBE000 000040
[ 0.000000] ACPI: FACS 0x000000003FFBE000 000040
[ 0.000000] ACPI: APIC 0x000000003FFB0390 00005C (v01 A M I OEMAPIC 12000506 MSFT 00000097)
[ 0.000000] ACPI: OEMB 0x000000003FFBE040 000046 (v01 A M I AMI_OEM 12000506 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 135MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] BRK [0x02076000, 0x02076fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x00000000377fdfff]
[ 0.000000] HighMem [mem 0x00000000377fe000-0x000000003ffaffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000003ffaffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000003ffaffff]
[ 0.000000] On node 0 totalpages: 261966
[ 0.000000] DMA zone: 36 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1962 pages used for memmap
[ 0.000000] Normal zone: 223230 pages, LIFO batch:31
[ 0.000000] HighMem zone: 34738 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] e820: [mem 0x40000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 18 pages/cpu @f5f06000 s41320 r0 d32408 u73728
[ 0.000000] pcpu-alloc: s41320 r0 d32408 u73728 alloc=18*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259968
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.2.0+ root=UUID=96c96a61-8615-4715-86d0-09cb8c62638c ro single irqpoll
[ 0.000000] Misrouted IRQ fixup and polling support enabled
[ 0.000000] This may significantly impact system performance
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000377fe:0003ffb0)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 1004604K/1047864K available (5476K kernel code, 550K rwdata, 2080K rodata, 520K init, 8152K bss, 43260K reserved, 0K cma-reserved, 138952K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc17ee000 - 0xc1870000 ( 520 kB)
.data : 0xc155957a - 0xc17ecb00 (2637 kB)
.text : 0xc1000000 - 0xc155957a (5477 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Running RCU self tests
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU lockdep checking is enabled.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
[ 0.000000] NR_IRQS:2304 nr_irqs:440 16
[ 0.000000] CPU 0 irqstacks, hard=f5816000 soft=f5818000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 32768
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 65536
[ 0.000000] ... CHAINHASH_SIZE: 32768
[ 0.000000] memory used by lock dependency info: 4911 kB
[ 0.000000] per task-struct memory footprint: 1344 bytes
[ 0.000000] ------------------------
[ 0.000000] | Locking API testsuite:
[ 0.000000] ----------------------------------------------------------------------------
[ 0.000000] | spin |wlock |rlock |mutex | wsem | rsem |
[ 0.000000] --------------------------------------------------------------------------
[ 0.000000] A-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000000] A-B-B-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000000] A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000000] A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000000] A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000000] A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000000] A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000000] double unlock: ok | ok | ok | ok | ok | ok |
[ 0.000000] initialize held: ok | ok | ok | ok | ok | ok |
[ 0.000000] bad unlock order: ok | ok | ok | ok | ok | ok |
[ 0.000000] --------------------------------------------------------------------------
[ 0.000000] recursive read-lock: | ok | | ok |
[ 0.000000] recursive read-lock #2: | ok | | ok |
[ 0.000000] mixed read-write-lock: | ok | | ok |
[ 0.000000] mixed write-read-lock: | ok | | ok |
[ 0.000000] --------------------------------------------------------------------------
[ 0.000000] hard-irqs-on + irq-safe-A/12: ok | ok | ok |
[ 0.000000] soft-irqs-on + irq-safe-A/12: ok | ok | ok |
[ 0.000000] hard-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 0.000000] soft-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 0.000000] sirq-safe-A => hirqs-on/12: ok | ok | ok |
[ 0.000000] sirq-safe-A => hirqs-on/21: ok | ok | ok |
[ 0.000000] hard-safe-A + irqs-on/12: ok | ok | ok |
[ 0.000000] soft-safe-A + irqs-on/12: ok | ok | ok |
[ 0.000000] hard-safe-A + irqs-on/21: ok | ok | ok |
[ 0.000000] soft-safe-A + irqs-on/21: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #1/132: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/132: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #1/213: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/213: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #1/231: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/231: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #1/312: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/312: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #1/321: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/321: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #2/123: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #2/123: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #2/132: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #2/132: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #2/213: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #2/213: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #2/231: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #2/231: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #2/312: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #2/312: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #2/321: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #2/321: ok | ok | ok |
[ 0.000000] hard-irq lock-inversion/123: ok | ok | ok |
[ 0.000000] soft-irq lock-inversion/123: ok | ok | ok |
[ 0.000000] hard-irq lock-inversion/132: ok | ok | ok |
[ 0.000000] soft-irq lock-inversion/132: ok | ok | ok |
[ 0.000000] hard-irq lock-inversion/213: ok | ok | ok |
[ 0.000000] soft-irq lock-inversion/213: ok | ok | ok |
[ 0.000000] hard-irq lock-inversion/231: ok | ok | ok |
[ 0.000000] soft-irq lock-inversion/231: ok | ok | ok |
[ 0.000000] hard-irq lock-inversion/312: ok | ok | ok |
[ 0.000000] soft-irq lock-inversion/312: ok | ok | ok |
[ 0.000000] hard-irq lock-inversion/321: ok | ok | ok |
[ 0.000000] soft-irq lock-inversion/321: ok | ok | ok |
[ 0.000000] hard-irq read-recursion/123: ok |
[ 0.000000] soft-irq read-recursion/123: ok |
[ 0.000000] hard-irq read-recursion/132: ok |
[ 0.000000] soft-irq read-recursion/132: ok |
[ 0.000000] hard-irq read-recursion/213: ok |
[ 0.000000] soft-irq read-recursion/213: ok |
[ 0.000000] hard-irq read-recursion/231: ok |
[ 0.000000] soft-irq read-recursion/231: ok |
[ 0.000000] hard-irq read-recursion/312: ok |
[ 0.000000] soft-irq read-recursion/312: ok |
[ 0.000000] hard-irq read-recursion/321: ok |
[ 0.000000] soft-irq read-recursion/321: ok |
[ 0.000000] --------------------------------------------------------------------------
[ 0.000000] | Wound/wait tests |
[ 0.000000] ---------------------
[ 0.000000] ww api failures: ok | ok | ok |
[ 0.000000] ww contexts mixing: ok | ok |
[ 0.000000] finishing ww context: ok | ok | ok | ok |
[ 0.000000] locking mismatches: ok | ok | ok |
[ 0.000000] EDEADLK handling: ok | ok | ok | ok | ok | ok | ok | ok | ok | ok |
[ 0.000000] spinlock nest unlocked: ok |
[ 0.000000] -----------------------------------------------------
[ 0.000000] |block | try |context|
[ 0.000000] -----------------------------------------------------
[ 0.000000] context: ok | ok | ok |
[ 0.000000] try: ok | ok | ok |
[ 0.000000] block: ok | ok | ok |
[ 0.000000] spinlock: ok | ok | ok |
[ 0.000000] -------------------------------------------------------
[ 0.000000] Good, all 253 testcases passed! |
[ 0.000000] ---------------------------------
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2000.015 MHz processor
[ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[ 0.008117] Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.03 BogoMIPS (lpj=8000060)
[ 0.008233] pid_max: default: 32768 minimum: 301
[ 0.008341] ACPI: Core revision 20150818
[ 0.018220] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.018441] Security Framework initialized
[ 0.018500] AppArmor: AppArmor disabled by boot time parameter
[ 0.018558] Yama: becoming mindful.
[ 0.018681] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.018743] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.020157] Initializing cgroup subsys blkio
[ 0.020247] Initializing cgroup subsys memory
[ 0.020326] Initializing cgroup subsys devices
[ 0.020415] Initializing cgroup subsys freezer
[ 0.020529] Initializing cgroup subsys net_cls
[ 0.020591] Initializing cgroup subsys perf_event
[ 0.020653] Initializing cgroup subsys net_prio
[ 0.020747] mce: CPU supports 5 MCE banks
[ 0.020838] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.020896] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
[ 0.026696] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.027373] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.068000] smpboot: CPU0: AMD Athlon(tm) 64 Processor 3200+ (fam: 0f, model: 2f, stepping: 02)
[ 0.068000] Performance Events: AMD PMU driver.
[ 0.068000] ... version: 0
[ 0.068000] ... bit width: 48
[ 0.068000] ... generic registers: 4
[ 0.068000] ... value mask: 0000ffffffffffff
[ 0.068000] ... max period: 00007fffffffffff
[ 0.068000] ... fixed-purpose events: 0
[ 0.068000] ... event mask: 000000000000000f
[ 0.088063] x86: Booted up 1 node, 1 CPUs
[ 0.088124] smpboot: Total of 1 processors activated (4000.03 BogoMIPS)
[ 0.088892] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.093012] devtmpfs: initialized
[ 0.096178] PM: Registering ACPI NVS region [mem 0x3ffbe000-0x3ffdffff] (139264 bytes)
[ 0.096519] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.100120] pinctrl core: initialized pinctrl subsystem
[ 0.101192] NET: Registered protocol family 16
[ 0.112041] cpuidle: using governor ladder
[ 0.124018] cpuidle: using governor menu
[ 0.124081] node 0 link 0: io port [1000, ffffff]
[ 0.124085] TOM: 0000000040000000 aka 1024M
[ 0.124144] node 0 link 0: mmio [a0000, bffff]
[ 0.124149] node 0 link 0: mmio [40000000, ffffffff]
[ 0.124153] bus: [bus 00-ff] on node 0 link 0
[ 0.124155] bus: 00 [io 0x0000-0xffff]
[ 0.124158] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.124160] bus: 00 [mem 0x40000000-0xffffffff]
[ 0.124282] ACPI: bus type PCI registered
[ 0.124340] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.125266] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 0.125325] PCI: Using configuration type 1 for base access
[ 0.160184] ACPI: Added _OSI(Module Device)
[ 0.160244] ACPI: Added _OSI(Processor Device)
[ 0.160302] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.160359] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.168647] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.174970] ACPI: Interpreter enabled
[ 0.175048] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150818/hwxface-580)
[ 0.175205] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20150818/hwxface-580)
[ 0.175416] ACPI: (supports S0 S1 S4 S5)
[ 0.175473] ACPI: Using IOAPIC for interrupt routing
[ 0.175620] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.200389] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.200460] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ 0.200625] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.200886] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7 window] (ignored)
[ 0.200890] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff window] (ignored)
[ 0.200893] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff window] (ignored)
[ 0.200896] acpi PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff window] (ignored)
[ 0.200900] acpi PNP0A03:00: host bridge window [mem 0x40000000-0xffffffff window] (ignored)
[ 0.200903] PCI: root bus 00: hardware-probed resources
[ 0.200968] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.202154] PCI host bridge to bus 0000:00
[ 0.202213] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.202273] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.202332] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.202393] pci_bus 0000:00: root bus resource [mem 0x40000000-0xffffffff]
[ 0.202544] pci 0000:00:00.0: [1106:0204] type 00 class 0x060000
[ 0.202577] pci 0000:00:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
[ 0.203273] pci 0000:00:00.1: [1106:1204] type 00 class 0x060000
[ 0.203648] pci 0000:00:00.2: [1106:2204] type 00 class 0x060000
[ 0.204006] pci 0000:00:00.3: [1106:3204] type 00 class 0x060000
[ 0.204380] pci 0000:00:00.4: [1106:4204] type 00 class 0x060000
[ 0.204729] pci 0000:00:00.7: [1106:7204] type 00 class 0x060000
[ 0.205082] pci 0000:00:01.0: [1106:b188] type 01 class 0x060400
[ 0.205151] pci 0000:00:01.0: supports D1
[ 0.205464] pci 0000:00:0f.0: [1106:0571] type 00 class 0x01018a
[ 0.205532] pci 0000:00:0f.0: reg 0x20: [io 0xfc00-0xfc0f]
[ 0.205559] pci 0000:00:0f.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.205621] pci 0000:00:0f.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.205681] pci 0000:00:0f.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.205741] pci 0000:00:0f.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.206097] pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300
[ 0.206165] pci 0000:00:10.0: reg 0x20: [io 0xec00-0xec1f]
[ 0.206214] pci 0000:00:10.0: supports D1 D2
[ 0.206217] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.206501] pci 0000:00:10.0: System wakeup disabled by ACPI
[ 0.206740] pci 0000:00:10.1: [1106:3038] type 00 class 0x0c0300
[ 0.206807] pci 0000:00:10.1: reg 0x20: [io 0xe880-0xe89f]
[ 0.206856] pci 0000:00:10.1: supports D1 D2
[ 0.206859] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.207020] pci 0000:00:10.1: System wakeup disabled by ACPI
[ 0.207260] pci 0000:00:10.2: [1106:3038] type 00 class 0x0c0300
[ 0.207327] pci 0000:00:10.2: reg 0x20: [io 0xe800-0xe81f]
[ 0.207377] pci 0000:00:10.2: supports D1 D2
[ 0.207380] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.207541] pci 0000:00:10.2: System wakeup disabled by ACPI
[ 0.207780] pci 0000:00:10.3: [1106:3038] type 00 class 0x0c0300
[ 0.207846] pci 0000:00:10.3: reg 0x20: [io 0xe480-0xe49f]
[ 0.207895] pci 0000:00:10.3: supports D1 D2
[ 0.207898] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.208070] pci 0000:00:10.3: System wakeup disabled by ACPI
[ 0.208313] pci 0000:00:10.4: [1106:3104] type 00 class 0x0c0320
[ 0.208347] pci 0000:00:10.4: reg 0x10: [mem 0xff6ffc00-0xff6ffcff]
[ 0.208436] pci 0000:00:10.4: supports D1 D2
[ 0.208440] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.208602] pci 0000:00:10.4: System wakeup disabled by ACPI
[ 0.208846] pci 0000:00:11.0: [1106:3287] type 00 class 0x060100
[ 0.209266] pci 0000:00:11.7: [1106:287e] type 00 class 0x060000
[ 0.209627] pci 0000:00:12.0: [1106:3065] type 00 class 0x020000
[ 0.209658] pci 0000:00:12.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.209671] pci 0000:00:12.0: reg 0x14: [mem 0xff6ff800-0xff6ff8ff]
[ 0.209750] pci 0000:00:12.0: supports D1 D2
[ 0.209753] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.209915] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.210158] pci 0000:00:13.0: [1106:287b] type 01 class 0x060400
[ 0.210483] pci 0000:00:13.1: [1106:287a] type 01 class 0x060400
[ 0.210686] pci 0000:00:13.1: System wakeup disabled by ACPI
[ 0.210941] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[ 0.211246] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[ 0.211548] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[ 0.211847] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[ 0.212275] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.212337] pci 0000:00:01.0: bridge window [io 0xa000-0xcfff]
[ 0.212343] pci 0000:00:01.0: bridge window [mem 0xff400000-0xff4fffff]
[ 0.212349] pci 0000:00:01.0: bridge window [mem 0x7ff00000-0xbfefffff pref]
[ 0.212368] pci 0000:01:00.0: [1002:4153] type 00 class 0x030000
[ 0.212394] pci 0000:01:00.0: reg 0x10: [mem 0xa0000000-0xafffffff pref]
[ 0.212405] pci 0000:01:00.0: reg 0x14: [io 0xc000-0xc0ff]
[ 0.212415] pci 0000:01:00.0: reg 0x18: [mem 0xff4f0000-0xff4fffff]
[ 0.212447] pci 0000:01:00.0: reg 0x30: [mem 0xff4c0000-0xff4dffff pref]
[ 0.212481] pci 0000:01:00.0: supports D1 D2
[ 0.212641] pci 0000:01:00.1: [1002:4173] type 00 class 0x038000
[ 0.212664] pci 0000:01:00.1: reg 0x10: [mem 0x90000000-0x9fffffff pref]
[ 0.212674] pci 0000:01:00.1: reg 0x14: [mem 0xff4e0000-0xff4effff]
[ 0.212741] pci 0000:01:00.1: supports D1 D2
[ 0.213090] pci 0000:00:13.0: PCI bridge to [bus 02-04]
[ 0.213173] pci 0000:02:00.0: [1106:287c] type 01 class 0x060400
[ 0.213252] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.213316] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.213555] pci 0000:02:00.1: [1106:287d] type 01 class 0x060400
[ 0.213633] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
[ 0.213860] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.214106] pci 0000:02:00.0: PCI bridge to [bus 03]
[ 0.214302] pci 0000:02:00.1: PCI bridge to [bus 04]
[ 0.214502] pci 0000:00:13.1: PCI bridge to [bus 05]
[ 0.214563] pci 0000:00:13.1: bridge window [io 0xd000-0xdfff]
[ 0.214569] pci 0000:00:13.1: bridge window [mem 0xff500000-0xff5fffff]
[ 0.214612] pci 0000:05:0b.0: [1102:0004] type 00 class 0x040100
[ 0.214641] pci 0000:05:0b.0: reg 0x10: [io 0xd800-0xd83f]
[ 0.214733] pci 0000:05:0b.0: supports D1 D2
[ 0.214892] pci 0000:05:0b.1: [1102:7003] type 00 class 0x098000
[ 0.214919] pci 0000:05:0b.1: reg 0x10: [io 0xdc00-0xdc07]
[ 0.215011] pci 0000:05:0b.1: supports D1 D2
[ 0.215170] pci 0000:05:0b.2: [1102:4001] type 00 class 0x0c0010
[ 0.215200] pci 0000:05:0b.2: reg 0x10: [mem 0xff5ef800-0xff5effff]
[ 0.215214] pci 0000:05:0b.2: reg 0x14: [mem 0xff5e8000-0xff5ebfff]
[ 0.215300] pci 0000:05:0b.2: supports D1 D2
[ 0.215303] pci 0000:05:0b.2: PME# supported from D0 D1 D2 D3hot
[ 0.215503] pci 0000:05:0c.0: [1044:a400] type 00 class 0x010000
[ 0.215524] pci 0000:05:0c.0: reg 0x10: [io 0xd880-0xd89f]
[ 0.215586] pci 0000:05:0c.0: reg 0x30: [mem 0xff5f0000-0xff5f7fff pref]
[ 0.215799] pci_bus 0000:00: on NUMA node 0
[ 0.218541] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.219282] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.220009] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.220722] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.221438] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.222246] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.223054] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.223862] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.225508] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.225569] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.225645] vgaarb: loaded
[ 0.225700] vgaarb: bridge control possible 0000:01:00.0
[ 0.228044] PCI: Using ACPI for IRQ routing
[ 0.228106] PCI: pci_cache_line_size set to 64 bytes
[ 0.228209] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.228221] e820: reserve RAM buffer [mem 0x3ffb0000-0x3fffffff]
[ 0.229541] clocksource: Switched to clocksource refined-jiffies
[ 0.249689] pnp: PnP ACPI init
[ 0.250095] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.251342] pnp 00:01: [dma 3]
[ 0.251688] pnp 00:01: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.252035] system 00:02: [io 0x0290-0x0297] has been reserved
[ 0.252179] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.252604] system 00:03: [io 0x03e0-0x03e7] has been reserved
[ 0.252666] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.252727] system 00:03: [io 0x0800-0x087f] has been reserved
[ 0.252787] system 00:03: [io 0x0400-0x041f] has been reserved
[ 0.252848] system 00:03: [mem 0xff780000-0xffffffff] has been reserved
[ 0.252910] system 00:03: [mem 0xf0000000-0xf7ffffff] has been reserved
[ 0.252975] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.253258] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.253321] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.253386] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.253571] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.253801] pnp 00:06: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.254421] pnp 00:07: [dma 0 disabled]
[ 0.254599] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.254815] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.254880] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.255513] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.255577] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.255639] system 00:09: [mem 0x00100000-0x3fffffff] could not be reserved
[ 0.255705] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.256075] pnp: PnP ACPI: found 10 devices
[ 0.298658] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.299804] clocksource: Switched to clocksource acpi_pm
[ 0.299903] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.299964] pci 0000:00:01.0: bridge window [io 0xa000-0xcfff]
[ 0.299964] pci 0000:00:01.0: bridge window [mem 0xff400000-0xff4fffff]
[ 0.299964] pci 0000:00:01.0: bridge window [mem 0x7ff00000-0xbfefffff pref]
[ 0.299964] pci 0000:02:00.0: PCI bridge to [bus 03]
[ 0.299964] pci 0000:02:00.1: PCI bridge to [bus 04]
[ 0.299964] pci 0000:00:13.0: PCI bridge to [bus 02-04]
[ 0.299964] pci 0000:00:13.1: PCI bridge to [bus 05]
[ 0.299964] pci 0000:00:13.1: bridge window [io 0xd000-0xdfff]
[ 0.299964] pci 0000:00:13.1: bridge window [mem 0xff500000-0xff5fffff]
[ 0.299964] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.299964] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.299964] pci_bus 0000:00: resource 6 [mem 0x40000000-0xffffffff]
[ 0.299964] pci_bus 0000:01: resource 0 [io 0xa000-0xcfff]
[ 0.299964] pci_bus 0000:01: resource 1 [mem 0xff400000-0xff4fffff]
[ 0.299964] pci_bus 0000:01: resource 2 [mem 0x7ff00000-0xbfefffff pref]
[ 0.299964] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
[ 0.299964] pci_bus 0000:05: resource 1 [mem 0xff500000-0xff5fffff]
[ 0.299964] NET: Registered protocol family 2
[ 0.299964] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.299964] TCP bind hash table entries: 8192 (order: 6, 294912 bytes)
[ 0.299964] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.299964] UDP hash table entries: 512 (order: 3, 40960 bytes)
[ 0.299964] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
[ 0.299964] NET: Registered protocol family 1
[ 0.299964] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[ 0.299964] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[ 0.299964] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.299964] PCI: CLS 64 bytes, default 64
[ 0.300118] Unpacking initramfs...
[ 0.799897] Freeing initrd memory: 15676K (f6152000 - f70a1000)
[ 0.800126] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1cd43c82186, max_idle_ns: 440795303188 ns
[ 0.800270] microcode: AMD CPU family 0xf not supported
[ 0.801452] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.801612] audit: initializing netlink subsys (disabled)
[ 0.801781] audit: type=2000 audit(1441606292.799:1): initialized
[ 0.802785] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.803274] VFS: Disk quotas dquot_6.6.0
[ 0.803365] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.806217] bounce: pool size: 64 pages
[ 0.806310] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.810567] io scheduler noop registered
[ 0.810626] io scheduler deadline registered
[ 0.810707] io scheduler cfq registered (default)
[ 0.811341] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.811423] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.811606] GHES: HEST is not enabled!
[ 0.811817] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.832757] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.834599] Linux agpgart interface v0.103
[ 0.834693] agpgart-amd64 0000:00:00.0: AGP bridge [1106/0204]
[ 0.841825] agpgart-amd64 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.842710] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.843484] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.844127] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.844756] mousedev: PS/2 mouse device common for all mice
[ 0.845245] rtc_cmos 00:00: RTC can wake from S4
[ 0.845803] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 0.845902] rtc_cmos 00:00: alarms up to one year, y3k, 114 bytes nvram
[ 0.846374] NET: Registered protocol family 10
[ 0.851332] mip6: Mobile IPv6
[ 0.851421] NET: Registered protocol family 17
[ 0.851489] mpls_gso: MPLS GSO support
[ 0.852074] Using IPI No-Shortcut mode
[ 0.852688] registered taskstats version 1
[ 0.862255] rtc_cmos 00:00: setting system clock to 2015-09-07 06:11:33 UTC (1441606293)
[ 0.862608] PM: Hibernation image not present or could not be loaded.
[ 0.863636] Freeing unused kernel memory: 520K (c17ee000 - c1870000)
[ 0.863817] Write protecting the kernel text: 5480k
[ 0.864111] Write protecting the kernel read-only data: 2084k
[ 0.867742] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.958967] random: udevadm urandom read with 0 bits of entropy available
[ 1.107063] SCSI subsystem initialized
[ 1.111680] ACPI: bus type USB registered
[ 1.111857] usbcore: registered new interface driver usbfs
[ 1.120164] usbcore: registered new interface driver hub
[ 1.120894] usbcore: registered new device driver usb
[ 1.125803] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.126627] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.127429] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 1.127960] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 1.129021] ehci-pci: EHCI PCI platform driver
[ 1.129574] uhci_hcd 0000:00:10.0: detected 2 ports
[ 1.129772] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000ec00
[ 1.132848] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker
[ 1.134150] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.134214] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.134284] usb usb1: Product: UHCI Host Controller
[ 1.134342] usb usb1: Manufacturer: Linux 4.2.0+ uhci_hcd
[ 1.134400] usb usb1: SerialNumber: 0000:00:10.0
[ 1.140542] libata version 3.00 loaded.
[ 1.142054] hub 1-0:1.0: USB hub found
[ 1.143366] hub 1-0:1.0: 2 ports detected
[ 1.159776] ehci-pci 0000:00:10.4: EHCI Host Controller
[ 1.159886] ehci-pci 0000:00:10.4: new USB bus registered, assigned bus number 2
[ 1.159980] ehci-pci 0000:00:10.4: debug port 1
[ 1.160242] ehci-pci 0000:00:10.4: irq 22, io mem 0xff6ffc00
[ 1.172112] ehci-pci 0000:00:10.4: USB 2.0 started, EHCI 1.00
[ 1.172609] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.172670] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.172741] usb usb2: Product: EHCI Host Controller
[ 1.172798] usb usb2: Manufacturer: Linux 4.2.0+ ehci_hcd
[ 1.172856] usb usb2: SerialNumber: 0000:00:10.4
[ 1.173851] hub 2-0:1.0: USB hub found
[ 1.173972] hub 2-0:1.0: 8 ports detected
[ 1.196436] hub 1-0:1.0: USB hub found
[ 1.196574] hub 1-0:1.0: 2 ports detected
[ 1.198650] via-rhine 0000:00:12.0 eth0: VIA Rhine II at 0x1e000, 00:13:d4:cc:9b:57, IRQ 23
[ 1.199497] via-rhine 0000:00:12.0 eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1
[ 1.199747] pata_via 0000:00:0f.0: version 0.3.4
[ 1.204744] firewire_ohci 0000:05:0b.2: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[ 1.208101] scsi host0: pata_via
[ 1.214579] scsi host1: pata_via
[ 1.214888] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 1.214950] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 1.215852] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 1.215928] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 1.216097] uhci_hcd 0000:00:10.1: detected 2 ports
[ 1.216180] uhci_hcd 0000:00:10.1: irq 22, io base 0x0000e880
[ 1.216436] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.216497] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.216568] usb usb3: Product: UHCI Host Controller
[ 1.216625] usb usb3: Manufacturer: Linux 4.2.0+ uhci_hcd
[ 1.216683] usb usb3: SerialNumber: 0000:00:10.1
[ 1.217435] hub 3-0:1.0: USB hub found
[ 1.217515] hub 3-0:1.0: 2 ports detected
[ 1.218331] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 1.218427] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[ 1.218509] uhci_hcd 0000:00:10.2: detected 2 ports
[ 1.218612] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e800
[ 1.218830] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.218891] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.218961] usb usb4: Product: UHCI Host Controller
[ 1.219019] usb usb4: Manufacturer: Linux 4.2.0+ uhci_hcd
[ 1.219077] usb usb4: SerialNumber: 0000:00:10.2
[ 1.223414] hub 4-0:1.0: USB hub found
[ 1.223507] hub 4-0:1.0: 2 ports detected
[ 1.226175] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 1.226254] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[ 1.226334] uhci_hcd 0000:00:10.3: detected 2 ports
[ 1.226440] uhci_hcd 0000:00:10.3: irq 23, io base 0x0000e480
[ 1.231499] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.231565] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.231635] usb usb5: Product: UHCI Host Controller
[ 1.231693] usb usb5: Manufacturer: Linux 4.2.0+ uhci_hcd
[ 1.231751] usb usb5: SerialNumber: 0000:00:10.3
[ 1.235950] hub 5-0:1.0: USB hub found
[ 1.236636] hub 5-0:1.0: 2 ports detected
[ 1.389490] ata1.00: ATA-8: WDC WD3200AAJB-00WGA0, 00.02C01, max UDMA/100
[ 1.389556] ata1.00: 625142448 sectors, multi 16: LBA48
[ 1.397154] ata1.00: configured for UDMA/100
[ 1.417415] scsi 0:0:0:0: Direct-Access ATA WDC WD3200AAJB-0 2C01 PQ: 0 ANSI: 5
[ 1.484047] usb 2-5: new high-speed USB device number 2 using ehci-pci
[ 1.592360] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-4163B, A103, max UDMA/33
[ 1.592783] ata2.01: HPA detected: current 66055248, native 78242976
[ 1.592843] ata2.01: ATA-6: SAMSUNG SP4002H, QU100-57, max UDMA/100
[ 1.592903] ata2.01: 66055248 sectors, multi 16: LBA
[ 1.592966] ata2.01: limited to UDMA/33 due to 40-wire cable
[ 1.608245] ata2.00: configured for UDMA/33
[ 1.624604] ata2.01: configured for UDMA/33
[ 1.626143] usb 2-5: New USB device found, idVendor=13fe, idProduct=1e23
[ 1.626205] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.626266] usb 2-5: Product: STORE N GO
[ 1.626323] usb 2-5: Manufacturer: Verbatim
[ 1.626380] usb 2-5: SerialNumber: 078A18B40293
[ 1.642927] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.643166] sd 0:0:0:0: [sda] Write Protect is off
[ 1.643226] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.643295] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.654079] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4163B A103 PQ: 0 ANSI: 5
[ 1.667529] scsi 1:0:1:0: Direct-Access ATA SAMSUNG SP4002H 0-57 PQ: 0 ANSI: 5
[ 1.668549] sd 1:0:1:0: [sdb] 66055248 512-byte logical blocks: (33.8 GB/31.4 GiB)
[ 1.668781] sd 1:0:1:0: [sdb] Write Protect is off
[ 1.668840] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.668909] sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.681708] sda: sda1 sda2 < sda5 sda6 sda7 >
[ 1.685166] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.705060] firewire_core 0000:05:0b.2: created device fw0: GUID 00023c0153000612, S400
[ 1.711329] sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 > sdb3
[ 1.711792] sdb: p3 size 13333950 extends beyond EOD, enabling native capacity
[ 1.712102] ata2: soft resetting link
[ 1.884366] ata2.01: n_sectors mismatch 66055248 != 78242976
[ 1.884426] ata2.01: new n_sectors matches native, probably late HPA unlock, n_sectors updated
[ 1.908227] ata2.00: configured for UDMA/33
[ 1.924587] ata2.01: configured for UDMA/33
[ 1.926790] ata2: EH complete
[ 1.927542] sd 1:0:1:0: [sdb] 78242976 512-byte logical blocks: (40.0 GB/37.3 GiB)
[ 1.929923] sdb: detected capacity change from 33820286976 to 40060403712
[ 1.986709] sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 > sdb3
[ 1.990123] sd 1:0:1:0: [sdb] Attached SCSI disk
[ 1.991830] uas: Unknown symbol usb_stor_adjust_quirks (err 0)
[ 1.991945] uas: Unknown symbol usb_stor_sense_invalidCDB (err 0)
[ 2.013013] sr 1:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.013093] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.014624] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.797383] random: nonblocking pool is initialized
[ 4.136490] floppy0: no floppy controllers found
[ 4.167567] PM: Starting manual resume from disk
[ 4.167652] PM: Hibernation image partition 8:5 present
[ 4.167654] PM: Looking for hibernation image.
[ 4.168514] PM: Image not found (code -22)
[ 4.168518] PM: Hibernation image not present or could not be loaded.
[ 4.176107] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
[ 4.176114] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff]
[ 4.176118] PM: Basic memory bitmaps created
[ 4.176753] PM: Basic memory bitmaps freed
[ 5.314103] EXT4-fs (sda7): mounting ext3 file system using the ext4 subsystem
[ 5.340393] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 9.556505] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 9.556591] ACPI: Sleep Button [SLPB]
[ 9.556854] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 9.556929] ACPI: Power Button [PWRB]
[ 9.557187] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 9.557260] ACPI: Power Button [PWRF]
[ 9.720661] parport_pc 00:01: reported by Plug and Play ACPI
[ 9.721075] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 9.835629] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.886893] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 9.887126] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 9.887331] sd 1:0:1:0: Attached scsi generic sg2 type 0
[ 10.347415] gameport gameport0: EMU10K1 is pci0000:05:0b.1/gameport0, io 0xdc00, speed 1209kHz
[ 10.978626] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 11.148338] [drm] Initialized drm 1.1.0 20060810
[ 11.221041] EDAC MC: Ver: 3.0.0
[ 11.244739] Error: Driver 'pcspkr' is already registered, aborting...
[ 11.259682] MCE: In-kernel MCE decoding enabled.
[ 11.362154] AMD64 EDAC driver v3.4.0
[ 11.362286] EDAC amd64: DRAM ECC enabled.
[ 11.362345] EDAC amd64: K8 revE or earlier detected (node 0).
[ 11.365660] EDAC MC0: Giving out device to module amd64_edac controller K8: DEV 0000:00:18.2 (INTERRUPT)
[ 11.372427] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
[ 11.372508] EDAC amd64: amd64_edac on 32-bit is unsupported. USE AT YOUR OWN RISK!
[ 11.588985] powernow_k8: fid 0xc (2000 MHz), vid 0x6
[ 11.589049] powernow_k8: fid 0xa (1800 MHz), vid 0x8
[ 11.589107] powernow_k8: fid 0x2 (1000 MHz), vid 0x12
[ 11.591254] powernow_k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ (1 cpu cores) (version 2.20.00)
[ 11.733388] snd_emu10k1 0000:05:0b.0: Installing spdif_bug patch: SB Audigy 2 ZS [SB0350]
[ 12.261560] [drm] radeon kernel modesetting enabled.
[ 12.289799] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input6
[ 12.292448] [drm] initializing kernel modesetting (RV350 0x1002:0x4153 0x1458:0x4050).
[ 12.292593] [drm] register mmio base: 0xFF4F0000
[ 12.292650] [drm] register mmio size: 65536
[ 12.293897] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
[ 12.293976] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
[ 12.301207] radeon 0000:01:00.0: putting AGP V3 device into 8x mode
[ 12.301312] radeon 0000:01:00.0: GTT: 256M 0xD0000000 - 0xDFFFFFFF
[ 12.301373] [drm] Generation 2 PCI interface, using max accessible memory
[ 12.301436] radeon 0000:01:00.0: VRAM: 256M 0x00000000A0000000 - 0x00000000AFFFFFFF (256M used)
[ 12.301566] [drm] Detected VRAM RAM=256M, BAR=256M
[ 12.301624] [drm] RAM width 128bits DDR
[ 12.311341] [TTM] Zone kernel: Available graphics memory: 440924 kiB
[ 12.311407] [TTM] Zone highmem: Available graphics memory: 510400 kiB
[ 12.311466] [TTM] Initializing pool allocator
[ 12.311574] [TTM] Initializing DMA pool allocator
[ 12.315904] [drm] radeon: 256M of VRAM memory ready
[ 12.315971] [drm] radeon: 256M of GTT memory ready.
[ 12.317955] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
[ 12.330111] ppdev: user-space parallel port driver
[ 12.334617] radeon 0000:01:00.0: WB disabled
[ 12.334685] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000d0000000 and cpu addr 0xf81b6000
[ 12.334765] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 12.334824] [drm] Driver supports precise vblank timestamp query.
[ 12.335053] [drm] radeon: irq initialized.
[ 12.335151] [drm] Loading R300 Microcode
[ 12.872738] floppy0: no floppy controllers found
[ 12.882778] [drm] radeon: ring at 0x00000000D0001000
[ 12.883009] [drm] ring test succeeded in 0 usecs
[ 12.883900] [drm] ib test succeeded in 0 usecs
[ 12.896117] [drm] Radeon Display Connectors
[ 12.896181] [drm] Connector 0:
[ 12.896236] [drm] VGA-1
[ 12.896292] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 12.896350] [drm] Encoders:
[ 12.896405] [drm] CRT1: INTERNAL_DAC1
[ 12.896461] [drm] Connector 1:
[ 12.896516] [drm] DVI-I-1
[ 12.896570] [drm] HPD1
[ 12.896625] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 12.896684] [drm] Encoders:
[ 12.896738] [drm] CRT2: INTERNAL_DAC2
[ 12.896794] [drm] DFP1: INTERNAL_TMDS1
[ 12.896850] [drm] Connector 2:
[ 12.896905] [drm] SVIDEO-1
[ 12.896959] [drm] Encoders:
[ 12.897013] [drm] TV1: INTERNAL_DAC2
[ 13.090790] usb-storage 2-5:1.0: USB Mass Storage device detected
[ 13.098912] [drm] fb mappable at 0xA0040000
[ 13.098974] [drm] vram apper at 0xA0000000
[ 13.099030] [drm] size 8294400
[ 13.099085] [drm] fb depth is 24
[ 13.099140] [drm] pitch is 7680
[ 13.101272] fbcon: radeondrmfb (fb0) is primary device
[ 13.104694] scsi host2: usb-storage 2-5:1.0
[ 13.105226] usbcore: registered new interface driver usb-storage
[ 13.175770] usbcore: registered new interface driver uas
[ 13.297365] Console: switching to colour frame buffer device 240x67
[ 13.484537] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 13.496955] [drm] Initialized radeon 2.43.0 20080528 for 0000:01:00.0 on minor 0
[ 14.112836] scsi 2:0:0:0: Direct-Access Verbatim STORE N GO 5.00 PQ: 0 ANSI: 0 CCS
[ 14.122875] sd 2:0:0:0: [sdc] 3911680 512-byte logical blocks: (2.00 GB/1.86 GiB)
[ 14.124262] sd 2:0:0:0: [sdc] Write Protect is off
[ 14.124703] sd 2:0:0:0: [sdc] Mode Sense: 23 00 00 00
[ 14.125363] sd 2:0:0:0: [sdc] No Caching mode page found
[ 14.125848] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[ 14.133011] sd 2:0:0:0: Attached scsi generic sg3 type 0
[ 14.280297] sdc: sdc1
[ 14.283729] sd 2:0:0:0: [sdc] Attached SCSI removable disk
[ 15.288573] ata1.00: configured for UDMA/100
[ 15.288967] ata1: EH complete
[ 15.368253] ata2.00: configured for UDMA/33
[ 15.376333] ata2.01: configured for UDMA/33
[ 15.376707] ata2: EH complete
[ 16.379644] Adding 2200868k swap on /dev/sda5. Priority:-1 extents:1 across:2200868k
[ 16.474822] EXT4-fs (sda7): re-mounted. Opts: (null)
[ 16.990628] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro,data=ordered
[ 18.041932] lp0: using parport0 (interrupt-driven).
[ 18.217202] Loading iSCSI transport class v2.0-870.
[ 18.286182] iscsi: registered transport (tcp)
[ 18.464704] iscsi: registered transport (iser)
[ 18.564158] fuse init (API version 7.23)
[ 18.773873] tun: Universal TUN/TAP device driver, 1.6
[ 18.801725] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 18.872125] w83627ehf: Found W83627EHG chip at 0x290
[ 18.902539] ACPI Warning: SystemIO range 0x0000000000000295-0x0000000000000296 conflicts with OpRegion 0x0000000000000290-0x0000000000000299 (\_SB_.PCI0.SBRG.SIOR.HWRE) (20150818/utaddress-254)
[ 18.931485] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 50.601762] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
[ 50.660438] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 50.744572] FAT-fs (sda6): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 50.815779] FAT-fs (sdc1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 95.301954] EATA/DMA 2.0x: Copyright (C) 1994-2003 Dario Ballabio.
[ 95.302530] EATA config options -> tm:1, lc:y, mq:16, rs:y, et:n, ip:n, ep:n, pp:y.
[ 95.303226] EATA0: 2.0C, PCI 0xd890, IRQ 10, BMST, SG 122, MB 64.
[ 95.303778] EATA0: wide SCSI support enabled, max_id 16, max_lun 8.
[ 95.304430] EATA0: SCSI channel 0 enabled, host target ID 7.
[ 95.304957] scsi host3: EATA/DMA 2.0x rev. 8.10.00
[ 96.869441] scsi 3:0:6:0: Direct-Access IBM DCAS-34330W S65A PQ: 0 ANSI: 2
[ 96.870191] scsi 3:0:6:0: cmds/lun 16, sorted, simple tags.
[ 98.944791] sd 3:0:6:0: Attached scsi generic sg4 type 0
[ 98.946384] sd 3:0:6:0: [sdd] 8466688 512-byte logical blocks: (4.33 GB/4.03 GiB)
[ 98.981881] sd 3:0:6:0: [sdd] Write Protect is off
[ 98.982332] sd 3:0:6:0: [sdd] Mode Sense: b3 00 00 08
[ 99.002590] sd 3:0:6:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 99.083991] sdd: sdd1 sdd2 < sdd5 >
[ 99.151142] sd 3:0:6:0: [sdd] Attached SCSI disk
[-- Attachment #4: 2015090715proc-interrupts.txt --]
[-- Type: text/plain, Size: 1514 bytes --]
CPU0
0: 44 IO-APIC 2-edge timer
1: 365 IO-APIC 1-edge i8042
7: 1 IO-APIC 7-edge parport0
8: 1 IO-APIC 8-edge rtc0
9: 0 IO-APIC 9-fasteoi acpi
10: 0 IO-APIC 10-edge EATA
12: 157 IO-APIC 12-edge i8042
14: 13173 IO-APIC 14-edge pata_via
15: 682 IO-APIC 15-edge pata_via
16: 300 IO-APIC 16-fasteoi snd_emu10k1, radeon
17: 301 IO-APIC 17-fasteoi firewire_ohci
20: 0 IO-APIC 20-fasteoi uhci_hcd:usb1
21: 0 IO-APIC 21-fasteoi uhci_hcd:usb4
22: 933 IO-APIC 22-fasteoi ehci_hcd:usb2, uhci_hcd:usb3
23: 240 IO-APIC 23-fasteoi uhci_hcd:usb5, eth0
NMI: 2 Non-maskable interrupts
LOC: 12596 Local timer interrupts
SPU: 0 Spurious interrupts
PMI: 2 Performance monitoring interrupts
IWI: 0 IRQ work interrupts
RTR: 0 APIC ICR read retries
RES: 0 Rescheduling interrupts
CAL: 0 Function call interrupts
TLB: 0 TLB shootdowns
TRM: 0 Thermal event interrupts
THR: 0 Threshold APIC interrupts
DFR: 0 Deferred Error APIC interrupts
MCE: 0 Machine check exceptions
MCP: 1 Machine check polls
ERR: 1
MIS: 0
PIN: 0 Posted-interrupt notification event
PIW: 0 Posted-interrupt wakeup event
next prev parent reply other threads:[~2015-09-07 9:24 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-06 6:28 eata fails to load on post 4.2 kernels Arthur Marsh
2015-09-06 9:04 ` Arthur Marsh
2015-09-06 11:37 ` Arthur Marsh
2015-09-06 20:31 ` Arthur Marsh
2015-09-07 3:06 ` Jiang Liu
[not found] ` <55ED2DFA.6030502@internode.on.net>
2015-09-07 9:24 ` Arthur Marsh [this message]
2015-09-08 5:19 ` Jiang Liu
2015-09-08 6:32 ` Arthur Marsh
2015-09-08 6:37 ` Jiang Liu
2015-09-08 7:26 ` [Bugfix] PCI, x86: Correctly allocate IRQs for PCI devices managed by non-PCI drivers Jiang Liu
2015-09-08 9:03 ` Arthur Marsh
2015-09-08 9:44 ` Jiang Liu
2015-09-08 16:27 ` Bjorn Helgaas
2015-09-08 16:49 ` Jiang Liu
2015-09-09 19:11 ` Bjorn Helgaas
2015-09-10 8:58 ` Jiang Liu
2015-09-14 3:08 ` [Bugfix 0/3] Convert eata driver to a normal PCI device driver Jiang Liu
2015-09-14 3:08 ` [Bugfix 1/3] eata: Use IDA to manage eata board IDs Jiang Liu
2015-09-14 8:08 ` Hannes Reinecke
2015-09-14 8:08 ` Hannes Reinecke
2015-09-14 3:08 ` [Bugfix 2/3] eata: Implement PCI driver to manage eata PCI devices Jiang Liu
2015-09-14 8:17 ` Hannes Reinecke
2015-09-14 8:31 ` Jiang Liu
2015-09-14 3:08 ` [Bugfix 3/3] eata: Enhance eata driver to support PCI device hot-removal Jiang Liu
2015-09-14 8:21 ` Hannes Reinecke
2015-09-14 8:31 ` Ballabio, Dario
2015-09-14 8:33 ` Jiang Liu
2015-09-16 13:42 ` Christoph Hellwig
2015-09-17 6:49 ` Jiang Liu
2015-09-18 15:08 ` Arthur Marsh
2015-09-22 7:30 ` [RFT v3] eata: Convert eata driver as normal PCI and platform device drivers Jiang Liu
2015-09-22 20:27 ` Hannes Reinecke
2015-09-22 22:25 ` Arthur Marsh
2015-09-22 22:45 ` James Bottomley
2015-09-22 23:36 ` Arthur Marsh
2015-09-23 5:24 ` Jiang Liu
2015-09-23 10:44 ` Arthur Marsh
2015-09-23 14:40 ` James Bottomley
2015-09-24 4:28 ` Jiang Liu
2015-09-24 5:56 ` Arthur Marsh
2015-09-26 6:27 ` Arthur Marsh
2015-10-03 8:11 ` Jiang Liu
2015-10-03 11:14 ` Arthur Marsh
2015-10-05 8:29 ` Arthur Marsh
2015-09-14 16:01 ` [Bugfix 0/3] Convert eata driver to a normal PCI device driver Arthur Marsh
2015-09-15 2:31 ` Jiang Liu
2015-09-15 7:19 ` Arthur Marsh
2015-09-16 5:07 ` Jiang Liu
2015-09-16 7:37 ` Arthur Marsh
2015-09-16 8:21 ` Jiang Liu
2015-09-16 11:29 ` Arthur Marsh
2015-09-09 19:04 ` [Bugfix] PCI, x86: Correctly allocate IRQs for PCI devices managed by non-PCI drivers Arthur Marsh
2015-09-10 7:50 ` eata fails to load on post 4.2 kernels Arthur Marsh
2015-09-10 8:13 ` Jiang Liu
2015-09-10 9:00 ` Arthur Marsh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55ED57DE.3070206@internode.on.net \
--to=arthur.marsh@internode.on.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.