Re: R: R: IBSS-RSN support on ath10k only links

From: Ben Greear <greearb@candelatech.com>
To: Alessandro Bolletta <alessandro@mediaspot.net>,
	Janusz Dziedzic <janusz.dziedzic@tieto.com>
Cc: "ath10k@lists.infradead.org" <ath10k@lists.infradead.org>
Subject: Re: R: R: IBSS-RSN support on ath10k only links
Date: Mon, 07 Sep 2015 09:59:16 -0700	[thread overview]
Message-ID: <55EDC264.4080206@candelatech.com> (raw)
In-Reply-To: <F52F175DFC537F48A43937B50B44BCA28205E430@EXCHANGE.mediaspot.local>

I'm not sure it is ever actually trying to load my firmware.

At the least, it is named quite a bit differently than the main
kernel does things.

You might ask around on the openwrt list(s)...I know there are folks that
are using my firmware on openwrt.

Thanks,
Ben

On 09/07/2015 09:04 AM, Alessandro Bolletta wrote:
> I'm using Openwrt trunk Bleeding Edge, r46802, kernel 4.1.6
>
> Here's the log:
>
> [    8.555690] Loading modules backported from Linux version master-2015-07-21-0-g47cd203
> [    8.563722] Backport generated by backports.git backports-20150626-0-gc1a4168
> [    8.590453] cfg80211: World regulatory domain updated:
> [    8.595703] cfg80211:  DFS Master region: unset
> [    8.600118] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
> [    8.610009] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
> [    8.618134] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
> [    8.626255] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
> [    8.634372] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
> [    8.643990] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
> [    8.653607] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
> [    8.661814] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
> [    8.669938] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
> [    8.819947] ath10k_pci 0000:01:00.0: pci irq legacy interrupts 0 irq_mode 0 reset_mode 0
> [    9.039112] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/cal-pci-0000:01:00.0.bin failed with error -2
> [    9.049632] ath10k_pci 0000:01:00.0: Falling back to user helper
> [    9.125249] firmware ath10k!cal-pci-0000:01:00.0.bin: firmware_loading_store: map pages failed
> [    9.136290] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/board-pci-168c:003c:19b6:d023.bin failed with error -2
> [    9.148852] ath10k_pci 0000:01:00.0: Falling back to user helper
> [    9.221747] firmware ath10k!QCA988X!hw2.0!board-pci-168c:003c:19b6:d023.bin: firmware_loading_store: map pages failed
> [    9.232684] ath10k_pci 0000:01:00.0: failed to load spec board file, falling back to generic: -11
> [    9.408284] ath10k_pci 0000:01:00.0: otp calibration failed: 2
> [    9.414212] ath10k_pci 0000:01:00.0: failed to run otp: -22
> [    9.419873] ath10k_pci 0000:01:00.0: could not init core (-22)
> [    9.425894] ath10k_pci 0000:01:00.0: could not probe fw (-22)
>
> -----Messaggio originale-----
> Da: Ben Greear [mailto:greearb@candelatech.com]
> Inviato: lunedì 7 settembre 2015 17.45
> A: Alessandro Bolletta <alessandro@mediaspot.net>; Janusz Dziedzic <janusz.dziedzic@tieto.com>
> Cc: ath10k@lists.infradead.org
> Oggetto: Re: R: IBSS-RSN support on ath10k only links
>
>
>
> On 09/07/2015 08:40 AM, Alessandro Bolletta wrote:
>> Hi Ben,
>>
>> I'm trying to run your firmware on my Mikrotik NetMetal device, which features a QCA9882 radio card, but it can't be loaded.
>>
>> If you can help me I can provide you my dmesg log.
>
> Please do post logs..and let me know what OS and kernel version you are using.
>
> Thanks,
> Ben
>

-- 
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc  http://www.candelatech.com

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k