* IBSS-RSN support on ath10k only links
@ 2015-09-05 15:08 Alessandro Bolletta
2015-09-05 20:00 ` Janusz Dziedzic
0 siblings, 1 reply; 14+ messages in thread
From: Alessandro Bolletta @ 2015-09-05 15:08 UTC (permalink / raw)
To: ath10k@lists.infradead.org
Hi,
What efforts could be needed in order to make IBSS-RSN working on ath10k <--> ath10k links? Is there anybody working actively on it?
Alessandro
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: IBSS-RSN support on ath10k only links
2015-09-05 15:08 IBSS-RSN support on ath10k only links Alessandro Bolletta
@ 2015-09-05 20:00 ` Janusz Dziedzic
2015-09-07 7:48 ` R: " Alessandro Bolletta
0 siblings, 1 reply; 14+ messages in thread
From: Janusz Dziedzic @ 2015-09-05 20:00 UTC (permalink / raw)
To: Alessandro Bolletta; +Cc: ath10k@lists.infradead.org
On 5 September 2015 at 17:08, Alessandro Bolletta
<alessandro@mediaspot.net> wrote:
> Hi,
> What efforts could be needed in order to make IBSS-RSN working on ath10k <--> ath10k links? Is there anybody working actively on it?
>
We did basic testing/implementation using ath10k/ath9k, wpa_supplicant
and main (636) firmware and qca6174.
Latest code already have WIPHY_FLAG_IBSS_RSN set, so I expect this
should work. Some FW issues could be still possible :)
BR
Janusz
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 14+ messages in thread
* R: IBSS-RSN support on ath10k only links
2015-09-05 20:00 ` Janusz Dziedzic
@ 2015-09-07 7:48 ` Alessandro Bolletta
2015-09-07 8:02 ` Janusz Dziedzic
0 siblings, 1 reply; 14+ messages in thread
From: Alessandro Bolletta @ 2015-09-07 7:48 UTC (permalink / raw)
To: Janusz Dziedzic; +Cc: ath10k@lists.infradead.org
Ok, great!
Can you also tell me if is it everything working correctly with IBSS-RSN, such as VHT?
Alessandro
-----Messaggio originale-----
Da: Janusz Dziedzic [mailto:janusz.dziedzic@tieto.com]
Inviato: sabato 5 settembre 2015 22.00
A: Alessandro Bolletta <alessandro@mediaspot.net>
Cc: ath10k@lists.infradead.org
Oggetto: Re: IBSS-RSN support on ath10k only links
On 5 September 2015 at 17:08, Alessandro Bolletta <alessandro@mediaspot.net> wrote:
> Hi,
> What efforts could be needed in order to make IBSS-RSN working on ath10k <--> ath10k links? Is there anybody working actively on it?
>
We did basic testing/implementation using ath10k/ath9k, wpa_supplicant and main (636) firmware and qca6174.
Latest code already have WIPHY_FLAG_IBSS_RSN set, so I expect this should work. Some FW issues could be still possible :)
BR
Janusz
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: IBSS-RSN support on ath10k only links
2015-09-07 7:48 ` R: " Alessandro Bolletta
@ 2015-09-07 8:02 ` Janusz Dziedzic
2015-09-07 8:03 ` R: " Alessandro Bolletta
0 siblings, 1 reply; 14+ messages in thread
From: Janusz Dziedzic @ 2015-09-07 8:02 UTC (permalink / raw)
To: Alessandro Bolletta; +Cc: ath10k@lists.infradead.org
On 7 September 2015 at 09:48, Alessandro Bolletta
<alessandro@mediaspot.net> wrote:
> Ok, great!
> Can you also tell me if is it everything working correctly with IBSS-RSN, such as VHT?
VHT was well tested for IBSS-open, so I suspect should woks fine also for RSN.
But we did only basic tests.
BR
Janusz
> Alessandro
>
> -----Messaggio originale-----
> Da: Janusz Dziedzic [mailto:janusz.dziedzic@tieto.com]
> Inviato: sabato 5 settembre 2015 22.00
> A: Alessandro Bolletta <alessandro@mediaspot.net>
> Cc: ath10k@lists.infradead.org
> Oggetto: Re: IBSS-RSN support on ath10k only links
>
> On 5 September 2015 at 17:08, Alessandro Bolletta <alessandro@mediaspot.net> wrote:
>> Hi,
>> What efforts could be needed in order to make IBSS-RSN working on ath10k <--> ath10k links? Is there anybody working actively on it?
>>
> We did basic testing/implementation using ath10k/ath9k, wpa_supplicant and main (636) firmware and qca6174.
> Latest code already have WIPHY_FLAG_IBSS_RSN set, so I expect this should work. Some FW issues could be still possible :)
>
> BR
> Janusz
>
> _______________________________________________
> ath10k mailing list
> ath10k@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/ath10k
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 14+ messages in thread
* R: IBSS-RSN support on ath10k only links
2015-09-07 8:02 ` Janusz Dziedzic
@ 2015-09-07 8:03 ` Alessandro Bolletta
2015-09-07 8:22 ` Janusz Dziedzic
0 siblings, 1 reply; 14+ messages in thread
From: Alessandro Bolletta @ 2015-09-07 8:03 UTC (permalink / raw)
To: Janusz Dziedzic; +Cc: ath10k@lists.infradead.org
Do you know if is it needed Ben Greear's firmware in order to run IBSS-RSN or is it also supported on official firmware?
Alessandro
-----Messaggio originale-----
Da: Janusz Dziedzic [mailto:janusz.dziedzic@tieto.com]
Inviato: lunedì 7 settembre 2015 10.03
A: Alessandro Bolletta <alessandro@mediaspot.net>
Cc: ath10k@lists.infradead.org
Oggetto: Re: IBSS-RSN support on ath10k only links
On 7 September 2015 at 09:48, Alessandro Bolletta <alessandro@mediaspot.net> wrote:
> Ok, great!
> Can you also tell me if is it everything working correctly with IBSS-RSN, such as VHT?
VHT was well tested for IBSS-open, so I suspect should woks fine also for RSN.
But we did only basic tests.
BR
Janusz
> Alessandro
>
> -----Messaggio originale-----
> Da: Janusz Dziedzic [mailto:janusz.dziedzic@tieto.com]
> Inviato: sabato 5 settembre 2015 22.00
> A: Alessandro Bolletta <alessandro@mediaspot.net>
> Cc: ath10k@lists.infradead.org
> Oggetto: Re: IBSS-RSN support on ath10k only links
>
> On 5 September 2015 at 17:08, Alessandro Bolletta <alessandro@mediaspot.net> wrote:
>> Hi,
>> What efforts could be needed in order to make IBSS-RSN working on ath10k <--> ath10k links? Is there anybody working actively on it?
>>
> We did basic testing/implementation using ath10k/ath9k, wpa_supplicant and main (636) firmware and qca6174.
> Latest code already have WIPHY_FLAG_IBSS_RSN set, so I expect this
> should work. Some FW issues could be still possible :)
>
> BR
> Janusz
>
> _______________________________________________
> ath10k mailing list
> ath10k@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/ath10k
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: IBSS-RSN support on ath10k only links
2015-09-07 8:03 ` R: " Alessandro Bolletta
@ 2015-09-07 8:22 ` Janusz Dziedzic
2015-09-07 9:48 ` Setting up a VHT ad-hoc connection with ath10k Jorge Baranda
2015-09-07 15:36 ` IBSS-RSN support on ath10k only links Ben Greear
0 siblings, 2 replies; 14+ messages in thread
From: Janusz Dziedzic @ 2015-09-07 8:22 UTC (permalink / raw)
To: Alessandro Bolletta; +Cc: ath10k@lists.infradead.org
On 7 September 2015 at 10:03, Alessandro Bolletta
<alessandro@mediaspot.net> wrote:
> Do you know if is it needed Ben Greear's firmware in order to run IBSS-RSN or is it also supported on official firmware?
>
We tested this only with 636 main firmware.
BR
Janusz
> Alessandro
>
> -----Messaggio originale-----
> Da: Janusz Dziedzic [mailto:janusz.dziedzic@tieto.com]
> Inviato: lunedì 7 settembre 2015 10.03
> A: Alessandro Bolletta <alessandro@mediaspot.net>
> Cc: ath10k@lists.infradead.org
> Oggetto: Re: IBSS-RSN support on ath10k only links
>
> On 7 September 2015 at 09:48, Alessandro Bolletta <alessandro@mediaspot.net> wrote:
>> Ok, great!
>> Can you also tell me if is it everything working correctly with IBSS-RSN, such as VHT?
>
> VHT was well tested for IBSS-open, so I suspect should woks fine also for RSN.
> But we did only basic tests.
>
> BR
> Janusz
>
>> Alessandro
>>
>> -----Messaggio originale-----
>> Da: Janusz Dziedzic [mailto:janusz.dziedzic@tieto.com]
>> Inviato: sabato 5 settembre 2015 22.00
>> A: Alessandro Bolletta <alessandro@mediaspot.net>
>> Cc: ath10k@lists.infradead.org
>> Oggetto: Re: IBSS-RSN support on ath10k only links
>>
>> On 5 September 2015 at 17:08, Alessandro Bolletta <alessandro@mediaspot.net> wrote:
>>> Hi,
>>> What efforts could be needed in order to make IBSS-RSN working on ath10k <--> ath10k links? Is there anybody working actively on it?
>>>
>> We did basic testing/implementation using ath10k/ath9k, wpa_supplicant and main (636) firmware and qca6174.
>> Latest code already have WIPHY_FLAG_IBSS_RSN set, so I expect this
>> should work. Some FW issues could be still possible :)
>>
>> BR
>> Janusz
>>
>> _______________________________________________
>> ath10k mailing list
>> ath10k@lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/ath10k
>
> _______________________________________________
> ath10k mailing list
> ath10k@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/ath10k
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 14+ messages in thread
* Setting up a VHT ad-hoc connection with ath10k
2015-09-07 8:22 ` Janusz Dziedzic
@ 2015-09-07 9:48 ` Jorge Baranda
2015-09-07 10:22 ` Janusz Dziedzic
2015-09-07 15:36 ` IBSS-RSN support on ath10k only links Ben Greear
1 sibling, 1 reply; 14+ messages in thread
From: Jorge Baranda @ 2015-09-07 9:48 UTC (permalink / raw)
To: ath10k
Dear all,
Recently, I bought some WLE900VX cards and equipped several computers
with such cards.
I want to check the capabilties of these cards, so I have thought of
establishing an AD-HOC 802.11ac link in order to do so.
I have been able to establish and AD-HOC connection between two of these
cards, but I am sure I am not establishing an 802.11ac connection
because the iwlist tool only reports bit rates up to 54Mb/s for the
established connection.
I would be very grateful if someone could provide me some hints on
configuring these cards to work using the 802.11ac and to check that the
connection using such protocol has been established.
Thank you very much in advance for your time and attention,
With kind regards,
--
Jorge Baranda
Research Engineer, MSc
jorge.baranda@cttc.es
Centre Tecnològic de Telecomunicacions de Catalunya (CTTC)
Av. Carl Friedrich Gauss, 7
08860 Castelldefels, Barcelona (Spain)
Tel: +34 93 645 29 00 Ext: 2171
Fax. +34 93 645 29 01
www.cttc.es
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Setting up a VHT ad-hoc connection with ath10k
2015-09-07 9:48 ` Setting up a VHT ad-hoc connection with ath10k Jorge Baranda
@ 2015-09-07 10:22 ` Janusz Dziedzic
2015-09-07 10:36 ` Jorge Baranda
0 siblings, 1 reply; 14+ messages in thread
From: Janusz Dziedzic @ 2015-09-07 10:22 UTC (permalink / raw)
To: Jorge Baranda; +Cc: ath10k@lists.infradead.org
On 7 September 2015 at 11:48, Jorge Baranda <jbaranda@cttc.es> wrote:
> Dear all,
>
> Recently, I bought some WLE900VX cards and equipped several computers with
> such cards.
> I want to check the capabilties of these cards, so I have thought of
> establishing an AD-HOC 802.11ac link in order to do so.
> I have been able to establish and AD-HOC connection between two of these
> cards, but I am sure I am not establishing an 802.11ac connection because
> the iwlist tool only reports bit rates up to 54Mb/s for the established
> connection.
> I would be very grateful if someone could provide me some hints on
> configuring these cards to work using the 802.11ac and to check that the
> connection using such protocol has been established.
>
You should use 636 firmware and lastes wpa_supplicant. Wpa_supplicant
will setup AC correctly (iw don't support this yet). After connected,
check if you have correct BW (80MHz) using:
iw wlan0 info
Next you can run some traffic eg. using iperf and check RX rate using:
iw wlan0 station dump.
BR
Janusz
> Thank you very much in advance for your time and attention,
>
> With kind regards,
>
> --
> Jorge Baranda
> Research Engineer, MSc
> jorge.baranda@cttc.es
>
> Centre Tecnològic de Telecomunicacions de Catalunya (CTTC)
> Av. Carl Friedrich Gauss, 7
> 08860 Castelldefels, Barcelona (Spain)
> Tel: +34 93 645 29 00 Ext: 2171
> Fax. +34 93 645 29 01
> www.cttc.es
>
>
> _______________________________________________
> ath10k mailing list
> ath10k@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/ath10k
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Setting up a VHT ad-hoc connection with ath10k
2015-09-07 10:22 ` Janusz Dziedzic
@ 2015-09-07 10:36 ` Jorge Baranda
0 siblings, 0 replies; 14+ messages in thread
From: Jorge Baranda @ 2015-09-07 10:36 UTC (permalink / raw)
To: ath10k
Dear Janusz,
By firmware 636, do you mean the one named 999.999.0.636 in the url:
https://wireless.wiki.kernel.org/en/users/drivers/ath10k/firmware?
And then, if I use wpa_supplicant could it be possible to setup an ADHOC
connection.
I thought wpa_supplicant is used to setup STAs in combination with
hostapd (to setup APs).
Thank you very much for your time and attention,
Kind regards,
Jorge
El 07/09/15 12:22, Janusz Dziedzic escribió:
> On 7 September 2015 at 11:48, Jorge Baranda <jbaranda@cttc.es> wrote:
>> Dear all,
>>
>> Recently, I bought some WLE900VX cards and equipped several computers with
>> such cards.
>> I want to check the capabilties of these cards, so I have thought of
>> establishing an AD-HOC 802.11ac link in order to do so.
>> I have been able to establish and AD-HOC connection between two of these
>> cards, but I am sure I am not establishing an 802.11ac connection because
>> the iwlist tool only reports bit rates up to 54Mb/s for the established
>> connection.
>> I would be very grateful if someone could provide me some hints on
>> configuring these cards to work using the 802.11ac and to check that the
>> connection using such protocol has been established.
>>
> You should use 636 firmware and lastes wpa_supplicant. Wpa_supplicant
> will setup AC correctly (iw don't support this yet). After connected,
> check if you have correct BW (80MHz) using:
> iw wlan0 info
>
> Next you can run some traffic eg. using iperf and check RX rate using:
> iw wlan0 station dump.
>
> BR
> Janusz
>
>> Thank you very much in advance for your time and attention,
>>
>> With kind regards,
>>
>> --
>> Jorge Baranda
>> Research Engineer, MSc
>> jorge.baranda@cttc.es
>>
>> Centre Tecnològic de Telecomunicacions de Catalunya (CTTC)
>> Av. Carl Friedrich Gauss, 7
>> 08860 Castelldefels, Barcelona (Spain)
>> Tel: +34 93 645 29 00 Ext: 2171
>> Fax. +34 93 645 29 01
>> www.cttc.es
>>
>>
>> _______________________________________________
>> ath10k mailing list
>> ath10k@lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/ath10k
> _______________________________________________
> ath10k mailing list
> ath10k@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/ath10k
--
Jorge Baranda
Research Engineer, MSc
jorge.baranda@cttc.es
Centre Tecnològic de Telecomunicacions de Catalunya (CTTC)
Av. Carl Friedrich Gauss, 7
08860 Castelldefels, Barcelona (Spain)
Tel: +34 93 645 29 00 Ext: 2171
Fax. +34 93 645 29 01
www.cttc.es
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: IBSS-RSN support on ath10k only links
2015-09-07 8:22 ` Janusz Dziedzic
2015-09-07 9:48 ` Setting up a VHT ad-hoc connection with ath10k Jorge Baranda
@ 2015-09-07 15:36 ` Ben Greear
2015-09-07 15:40 ` R: " Alessandro Bolletta
1 sibling, 1 reply; 14+ messages in thread
From: Ben Greear @ 2015-09-07 15:36 UTC (permalink / raw)
To: Janusz Dziedzic, Alessandro Bolletta; +Cc: ath10k@lists.infradead.org
My firmware does support IBSS, and it has at least some support for IBSS-RSN.
My notes indicate that I had ath10k <-> ath9k IBSS-RSN working, but for one reason
or another, I did not have a stable ath10k <-> ath10k IBSS-RSN connection.
There are encrypted virtual devices that one can use on top of un-encrypted
IBSS connections, so maybe that is the best solution in the meantime.
I'd be interested to know if someone did have a stable ath10k <-> ath10k IBSS-RSN on
the .636 firmware.
I will be trying to enable AMSDU support on IBSS sometime soon, so I'll run
some more tests then.
Thanks,
Ben
On 09/07/2015 01:22 AM, Janusz Dziedzic wrote:
> On 7 September 2015 at 10:03, Alessandro Bolletta
> <alessandro@mediaspot.net> wrote:
>> Do you know if is it needed Ben Greear's firmware in order to run IBSS-RSN or is it also supported on official firmware?
>>
> We tested this only with 636 main firmware.
>
> BR
> Janusz
>
>> Alessandro
>>
>> -----Messaggio originale-----
>> Da: Janusz Dziedzic [mailto:janusz.dziedzic@tieto.com]
>> Inviato: lunedì 7 settembre 2015 10.03
>> A: Alessandro Bolletta <alessandro@mediaspot.net>
>> Cc: ath10k@lists.infradead.org
>> Oggetto: Re: IBSS-RSN support on ath10k only links
>>
>> On 7 September 2015 at 09:48, Alessandro Bolletta <alessandro@mediaspot.net> wrote:
>>> Ok, great!
>>> Can you also tell me if is it everything working correctly with IBSS-RSN, such as VHT?
>>
>> VHT was well tested for IBSS-open, so I suspect should woks fine also for RSN.
>> But we did only basic tests.
>>
>> BR
>> Janusz
>>
>>> Alessandro
>>>
>>> -----Messaggio originale-----
>>> Da: Janusz Dziedzic [mailto:janusz.dziedzic@tieto.com]
>>> Inviato: sabato 5 settembre 2015 22.00
>>> A: Alessandro Bolletta <alessandro@mediaspot.net>
>>> Cc: ath10k@lists.infradead.org
>>> Oggetto: Re: IBSS-RSN support on ath10k only links
>>>
>>> On 5 September 2015 at 17:08, Alessandro Bolletta <alessandro@mediaspot.net> wrote:
>>>> Hi,
>>>> What efforts could be needed in order to make IBSS-RSN working on ath10k <--> ath10k links? Is there anybody working actively on it?
>>>>
>>> We did basic testing/implementation using ath10k/ath9k, wpa_supplicant and main (636) firmware and qca6174.
>>> Latest code already have WIPHY_FLAG_IBSS_RSN set, so I expect this
>>> should work. Some FW issues could be still possible :)
>>>
>>> BR
>>> Janusz
>>>
>>> _______________________________________________
>>> ath10k mailing list
>>> ath10k@lists.infradead.org
>>> http://lists.infradead.org/mailman/listinfo/ath10k
>>
>> _______________________________________________
>> ath10k mailing list
>> ath10k@lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/ath10k
>
> _______________________________________________
> ath10k mailing list
> ath10k@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/ath10k
>
--
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc http://www.candelatech.com
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 14+ messages in thread
* R: IBSS-RSN support on ath10k only links
2015-09-07 15:36 ` IBSS-RSN support on ath10k only links Ben Greear
@ 2015-09-07 15:40 ` Alessandro Bolletta
2015-09-07 15:44 ` Ben Greear
0 siblings, 1 reply; 14+ messages in thread
From: Alessandro Bolletta @ 2015-09-07 15:40 UTC (permalink / raw)
To: Ben Greear, Janusz Dziedzic; +Cc: ath10k@lists.infradead.org
Hi Ben,
I'm trying to run your firmware on my Mikrotik NetMetal device, which features a QCA9882 radio card, but it can't be loaded.
If you can help me I can provide you my dmesg log.
--
Alessandro Bolletta
-----Messaggio originale-----
Da: Ben Greear [mailto:greearb@candelatech.com]
Inviato: lunedì 7 settembre 2015 17.37
A: Janusz Dziedzic <janusz.dziedzic@tieto.com>; Alessandro Bolletta <alessandro@mediaspot.net>
Cc: ath10k@lists.infradead.org
Oggetto: Re: IBSS-RSN support on ath10k only links
My firmware does support IBSS, and it has at least some support for IBSS-RSN.
My notes indicate that I had ath10k <-> ath9k IBSS-RSN working, but for one reason or another, I did not have a stable ath10k <-> ath10k IBSS-RSN connection.
There are encrypted virtual devices that one can use on top of un-encrypted IBSS connections, so maybe that is the best solution in the meantime.
I'd be interested to know if someone did have a stable ath10k <-> ath10k IBSS-RSN on the .636 firmware.
I will be trying to enable AMSDU support on IBSS sometime soon, so I'll run some more tests then.
Thanks,
Ben
On 09/07/2015 01:22 AM, Janusz Dziedzic wrote:
> On 7 September 2015 at 10:03, Alessandro Bolletta
> <alessandro@mediaspot.net> wrote:
>> Do you know if is it needed Ben Greear's firmware in order to run IBSS-RSN or is it also supported on official firmware?
>>
> We tested this only with 636 main firmware.
>
> BR
> Janusz
>
>> Alessandro
>>
>> -----Messaggio originale-----
>> Da: Janusz Dziedzic [mailto:janusz.dziedzic@tieto.com]
>> Inviato: lunedì 7 settembre 2015 10.03
>> A: Alessandro Bolletta <alessandro@mediaspot.net>
>> Cc: ath10k@lists.infradead.org
>> Oggetto: Re: IBSS-RSN support on ath10k only links
>>
>> On 7 September 2015 at 09:48, Alessandro Bolletta <alessandro@mediaspot.net> wrote:
>>> Ok, great!
>>> Can you also tell me if is it everything working correctly with IBSS-RSN, such as VHT?
>>
>> VHT was well tested for IBSS-open, so I suspect should woks fine also for RSN.
>> But we did only basic tests.
>>
>> BR
>> Janusz
>>
>>> Alessandro
>>>
>>> -----Messaggio originale-----
>>> Da: Janusz Dziedzic [mailto:janusz.dziedzic@tieto.com]
>>> Inviato: sabato 5 settembre 2015 22.00
>>> A: Alessandro Bolletta <alessandro@mediaspot.net>
>>> Cc: ath10k@lists.infradead.org
>>> Oggetto: Re: IBSS-RSN support on ath10k only links
>>>
>>> On 5 September 2015 at 17:08, Alessandro Bolletta <alessandro@mediaspot.net> wrote:
>>>> Hi,
>>>> What efforts could be needed in order to make IBSS-RSN working on ath10k <--> ath10k links? Is there anybody working actively on it?
>>>>
>>> We did basic testing/implementation using ath10k/ath9k, wpa_supplicant and main (636) firmware and qca6174.
>>> Latest code already have WIPHY_FLAG_IBSS_RSN set, so I expect this
>>> should work. Some FW issues could be still possible :)
>>>
>>> BR
>>> Janusz
>>>
>>> _______________________________________________
>>> ath10k mailing list
>>> ath10k@lists.infradead.org
>>> http://lists.infradead.org/mailman/listinfo/ath10k
>>
>> _______________________________________________
>> ath10k mailing list
>> ath10k@lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/ath10k
>
> _______________________________________________
> ath10k mailing list
> ath10k@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/ath10k
>
--
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc http://www.candelatech.com
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: R: IBSS-RSN support on ath10k only links
2015-09-07 15:40 ` R: " Alessandro Bolletta
@ 2015-09-07 15:44 ` Ben Greear
2015-09-07 16:04 ` R: " Alessandro Bolletta
0 siblings, 1 reply; 14+ messages in thread
From: Ben Greear @ 2015-09-07 15:44 UTC (permalink / raw)
To: Alessandro Bolletta, Janusz Dziedzic; +Cc: ath10k@lists.infradead.org
On 09/07/2015 08:40 AM, Alessandro Bolletta wrote:
> Hi Ben,
>
> I'm trying to run your firmware on my Mikrotik NetMetal device, which features a QCA9882 radio card, but it can't be loaded.
>
> If you can help me I can provide you my dmesg log.
Please do post logs..and let me know what OS and kernel version you are using.
Thanks,
Ben
--
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc http://www.candelatech.com
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 14+ messages in thread
* R: R: IBSS-RSN support on ath10k only links
2015-09-07 15:44 ` Ben Greear
@ 2015-09-07 16:04 ` Alessandro Bolletta
2015-09-07 16:59 ` Ben Greear
0 siblings, 1 reply; 14+ messages in thread
From: Alessandro Bolletta @ 2015-09-07 16:04 UTC (permalink / raw)
To: Ben Greear, Janusz Dziedzic; +Cc: ath10k@lists.infradead.org
I'm using Openwrt trunk Bleeding Edge, r46802, kernel 4.1.6
Here's the log:
[ 8.555690] Loading modules backported from Linux version master-2015-07-21-0-g47cd203
[ 8.563722] Backport generated by backports.git backports-20150626-0-gc1a4168
[ 8.590453] cfg80211: World regulatory domain updated:
[ 8.595703] cfg80211: DFS Master region: unset
[ 8.600118] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 8.610009] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 8.618134] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 8.626255] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 8.634372] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 8.643990] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 8.653607] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 8.661814] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 8.669938] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 8.819947] ath10k_pci 0000:01:00.0: pci irq legacy interrupts 0 irq_mode 0 reset_mode 0
[ 9.039112] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/cal-pci-0000:01:00.0.bin failed with error -2
[ 9.049632] ath10k_pci 0000:01:00.0: Falling back to user helper
[ 9.125249] firmware ath10k!cal-pci-0000:01:00.0.bin: firmware_loading_store: map pages failed
[ 9.136290] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/board-pci-168c:003c:19b6:d023.bin failed with error -2
[ 9.148852] ath10k_pci 0000:01:00.0: Falling back to user helper
[ 9.221747] firmware ath10k!QCA988X!hw2.0!board-pci-168c:003c:19b6:d023.bin: firmware_loading_store: map pages failed
[ 9.232684] ath10k_pci 0000:01:00.0: failed to load spec board file, falling back to generic: -11
[ 9.408284] ath10k_pci 0000:01:00.0: otp calibration failed: 2
[ 9.414212] ath10k_pci 0000:01:00.0: failed to run otp: -22
[ 9.419873] ath10k_pci 0000:01:00.0: could not init core (-22)
[ 9.425894] ath10k_pci 0000:01:00.0: could not probe fw (-22)
-----Messaggio originale-----
Da: Ben Greear [mailto:greearb@candelatech.com]
Inviato: lunedì 7 settembre 2015 17.45
A: Alessandro Bolletta <alessandro@mediaspot.net>; Janusz Dziedzic <janusz.dziedzic@tieto.com>
Cc: ath10k@lists.infradead.org
Oggetto: Re: R: IBSS-RSN support on ath10k only links
On 09/07/2015 08:40 AM, Alessandro Bolletta wrote:
> Hi Ben,
>
> I'm trying to run your firmware on my Mikrotik NetMetal device, which features a QCA9882 radio card, but it can't be loaded.
>
> If you can help me I can provide you my dmesg log.
Please do post logs..and let me know what OS and kernel version you are using.
Thanks,
Ben
--
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc http://www.candelatech.com
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: R: R: IBSS-RSN support on ath10k only links
2015-09-07 16:04 ` R: " Alessandro Bolletta
@ 2015-09-07 16:59 ` Ben Greear
0 siblings, 0 replies; 14+ messages in thread
From: Ben Greear @ 2015-09-07 16:59 UTC (permalink / raw)
To: Alessandro Bolletta, Janusz Dziedzic; +Cc: ath10k@lists.infradead.org
I'm not sure it is ever actually trying to load my firmware.
At the least, it is named quite a bit differently than the main
kernel does things.
You might ask around on the openwrt list(s)...I know there are folks that
are using my firmware on openwrt.
Thanks,
Ben
On 09/07/2015 09:04 AM, Alessandro Bolletta wrote:
> I'm using Openwrt trunk Bleeding Edge, r46802, kernel 4.1.6
>
> Here's the log:
>
> [ 8.555690] Loading modules backported from Linux version master-2015-07-21-0-g47cd203
> [ 8.563722] Backport generated by backports.git backports-20150626-0-gc1a4168
> [ 8.590453] cfg80211: World regulatory domain updated:
> [ 8.595703] cfg80211: DFS Master region: unset
> [ 8.600118] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
> [ 8.610009] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
> [ 8.618134] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
> [ 8.626255] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
> [ 8.634372] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
> [ 8.643990] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
> [ 8.653607] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
> [ 8.661814] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
> [ 8.669938] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
> [ 8.819947] ath10k_pci 0000:01:00.0: pci irq legacy interrupts 0 irq_mode 0 reset_mode 0
> [ 9.039112] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/cal-pci-0000:01:00.0.bin failed with error -2
> [ 9.049632] ath10k_pci 0000:01:00.0: Falling back to user helper
> [ 9.125249] firmware ath10k!cal-pci-0000:01:00.0.bin: firmware_loading_store: map pages failed
> [ 9.136290] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/board-pci-168c:003c:19b6:d023.bin failed with error -2
> [ 9.148852] ath10k_pci 0000:01:00.0: Falling back to user helper
> [ 9.221747] firmware ath10k!QCA988X!hw2.0!board-pci-168c:003c:19b6:d023.bin: firmware_loading_store: map pages failed
> [ 9.232684] ath10k_pci 0000:01:00.0: failed to load spec board file, falling back to generic: -11
> [ 9.408284] ath10k_pci 0000:01:00.0: otp calibration failed: 2
> [ 9.414212] ath10k_pci 0000:01:00.0: failed to run otp: -22
> [ 9.419873] ath10k_pci 0000:01:00.0: could not init core (-22)
> [ 9.425894] ath10k_pci 0000:01:00.0: could not probe fw (-22)
>
> -----Messaggio originale-----
> Da: Ben Greear [mailto:greearb@candelatech.com]
> Inviato: lunedì 7 settembre 2015 17.45
> A: Alessandro Bolletta <alessandro@mediaspot.net>; Janusz Dziedzic <janusz.dziedzic@tieto.com>
> Cc: ath10k@lists.infradead.org
> Oggetto: Re: R: IBSS-RSN support on ath10k only links
>
>
>
> On 09/07/2015 08:40 AM, Alessandro Bolletta wrote:
>> Hi Ben,
>>
>> I'm trying to run your firmware on my Mikrotik NetMetal device, which features a QCA9882 radio card, but it can't be loaded.
>>
>> If you can help me I can provide you my dmesg log.
>
> Please do post logs..and let me know what OS and kernel version you are using.
>
> Thanks,
> Ben
>
--
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc http://www.candelatech.com
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2015-09-07 16:59 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-09-05 15:08 IBSS-RSN support on ath10k only links Alessandro Bolletta
2015-09-05 20:00 ` Janusz Dziedzic
2015-09-07 7:48 ` R: " Alessandro Bolletta
2015-09-07 8:02 ` Janusz Dziedzic
2015-09-07 8:03 ` R: " Alessandro Bolletta
2015-09-07 8:22 ` Janusz Dziedzic
2015-09-07 9:48 ` Setting up a VHT ad-hoc connection with ath10k Jorge Baranda
2015-09-07 10:22 ` Janusz Dziedzic
2015-09-07 10:36 ` Jorge Baranda
2015-09-07 15:36 ` IBSS-RSN support on ath10k only links Ben Greear
2015-09-07 15:40 ` R: " Alessandro Bolletta
2015-09-07 15:44 ` Ben Greear
2015-09-07 16:04 ` R: " Alessandro Bolletta
2015-09-07 16:59 ` Ben Greear
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.