Re: [PATCH 07/17] ARM: dts: am4372: add reset data

[Tero Kristo <t-kristo@ti.com>]

On 09/25/2015 03:57 PM, Lokesh Vutla wrote:
> Hi Tero,
>
> On Thursday 24 September 2015 07:56 PM, Tero Kristo wrote:
>> Add reset data for pruss, gfx, wkup-m3 and system reset.
>>
>> Signed-off-by: Tero Kristo <t-kristo@ti.com>
>> ---
>>   arch/arm/boot/dts/am4372.dtsi |   24 ++++++++++++++++++++++++
>>   1 file changed, 24 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
>> index 0447c04a..fcc8d31 100644
>> --- a/arch/arm/boot/dts/am4372.dtsi
>> +++ b/arch/arm/boot/dts/am4372.dtsi
>> @@ -116,12 +116,15 @@
>>   				reg-names = "umem", "dmem";
>>   				ti,hwmods = "wkup_m3";
>>   				ti,pm-firmware = "am335x-pm-firmware.elf";
>> +				reset-names = "wkup_m3";
>> +				resets = <&prcm 0x2000 0x10 3 0x14 5>;
>>   			};
>>
>>   			prcm: prcm@1f0000 {
>>   				compatible = "ti,am4-prcm";
>>   				reg = <0x1f0000 0x11000>;
>>   				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
>> +				#reset-cells = <5>;
>>
>>   				prcm_clocks: clocks {
>>   					#address-cells = <1>;
>> @@ -130,6 +133,12 @@
>>
>>   				prcm_clockdomains: clockdomains {
>>   				};
>> +
>> +				system_reset: system_reset {
>> +					compatible = "ti,system-reset";
>> +					reset-names = "system";
>> +					reset-cells = <&prcm 0x4000 0 0 4 0>;
> This should be resets instead of reset-cells.
> With this change, reboot is functional on AM437x GP evm.

Oops, nasty typo there. Thanks for catching.

-Tero

>
> Thanks and regards,
> Lokesh
>