All of lore.kernel.org
 help / color / mirror / Atom feed
From: Samuel Pitoiset <samuel.pitoiset-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: Ilia Mirkin <imirkin-FrUbXkNCsVf2fBVCVOL8/A@public.gmane.org>,
	mesa-dev-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org,
	nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
Cc: mesa-stable-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
Subject: Re: [PATCH] nv50, nvc0: don't base decisions on available pushbuf space
Date: Sun, 11 Oct 2015 17:05:51 +0200	[thread overview]
Message-ID: <561A7ACF.8070603@gmail.com> (raw)
In-Reply-To: <1444468187-13868-1-git-send-email-imirkin-FrUbXkNCsVf2fBVCVOL8/A@public.gmane.org>

I did a full piglit run on Fermi. There are no regressions and you fixed 
texelFetch tests and other ones which failed with that assert.

I'm lazy to do it on Tesla, so:

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

Thanks!

On 10/10/2015 11:09 AM, Ilia Mirkin wrote:
> We still have to push everything out, might as well kick earlier and
> flip pushbufs when we know we'll need it. This resolves some issues with
> the new policy of making sure that we always leave a bit of room at the
> end for fences.
>
> Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
> Cc: mesa-stable@lists.freedesktop.org
> ---
>   src/gallium/drivers/nouveau/nv50/nv50_shader_state.c |  9 ++-------
>   src/gallium/drivers/nouveau/nv50/nv50_transfer.c     | 16 +++-------------
>   src/gallium/drivers/nouveau/nvc0/nvc0_transfer.c     | 20 +++++---------------
>   3 files changed, 10 insertions(+), 35 deletions(-)
>
> diff --git a/src/gallium/drivers/nouveau/nv50/nv50_shader_state.c b/src/gallium/drivers/nouveau/nv50/nv50_shader_state.c
> index fdde11f..941555f 100644
> --- a/src/gallium/drivers/nouveau/nv50/nv50_shader_state.c
> +++ b/src/gallium/drivers/nouveau/nv50/nv50_shader_state.c
> @@ -65,14 +65,9 @@ nv50_constbufs_validate(struct nv50_context *nv50)
>                  PUSH_DATA (push, (b << 12) | (i << 8) | p | 1);
>               }
>               while (words) {
> -               unsigned nr;
> -
> -               if (!PUSH_SPACE(push, 16))
> -                  break;
> -               nr = PUSH_AVAIL(push);
> -               assert(nr >= 16);
> -               nr = MIN2(MIN2(nr - 3, words), NV04_PFIFO_MAX_PACKET_LEN);
> +               unsigned nr = MIN2(words, NV04_PFIFO_MAX_PACKET_LEN);
>   
> +               PUSH_SPACE(push, nr + 3);
>                  BEGIN_NV04(push, NV50_3D(CB_ADDR), 1);
>                  PUSH_DATA (push, (start << 8) | b);
>                  BEGIN_NI04(push, NV50_3D(CB_DATA(0)), nr);
> diff --git a/src/gallium/drivers/nouveau/nv50/nv50_transfer.c b/src/gallium/drivers/nouveau/nv50/nv50_transfer.c
> index be51407..9a3fd1e 100644
> --- a/src/gallium/drivers/nouveau/nv50/nv50_transfer.c
> +++ b/src/gallium/drivers/nouveau/nv50/nv50_transfer.c
> @@ -187,14 +187,7 @@ nv50_sifc_linear_u8(struct nouveau_context *nv,
>      PUSH_DATA (push, 0);
>   
>      while (count) {
> -      unsigned nr;
> -
> -      if (!PUSH_SPACE(push, 16))
> -         break;
> -      nr = PUSH_AVAIL(push);
> -      assert(nr >= 16);
> -      nr = MIN2(count, nr - 1);
> -      nr = MIN2(nr, NV04_PFIFO_MAX_PACKET_LEN);
> +      unsigned nr = MIN2(count, NV04_PFIFO_MAX_PACKET_LEN);
>   
>         BEGIN_NI04(push, NV50_2D(SIFC_DATA), nr);
>         PUSH_DATAp(push, src, nr);
> @@ -395,12 +388,9 @@ nv50_cb_push(struct nouveau_context *nv,
>      nouveau_pushbuf_validate(push);
>   
>      while (words) {
> -      unsigned nr;
> -
> -      nr = PUSH_AVAIL(push);
> -      nr = MIN2(nr - 7, words);
> -      nr = MIN2(nr, NV04_PFIFO_MAX_PACKET_LEN - 1);
> +      unsigned nr = MIN2(words, NV04_PFIFO_MAX_PACKET_LEN);
>   
> +      PUSH_SPACE(push, nr + 7);
>         BEGIN_NV04(push, NV50_3D(CB_DEF_ADDRESS_HIGH), 3);
>         PUSH_DATAh(push, bo->offset + base);
>         PUSH_DATA (push, bo->offset + base);
> diff --git a/src/gallium/drivers/nouveau/nvc0/nvc0_transfer.c b/src/gallium/drivers/nouveau/nvc0/nvc0_transfer.c
> index aaec60a..d459dd6 100644
> --- a/src/gallium/drivers/nouveau/nvc0/nvc0_transfer.c
> +++ b/src/gallium/drivers/nouveau/nvc0/nvc0_transfer.c
> @@ -188,14 +188,10 @@ nvc0_m2mf_push_linear(struct nouveau_context *nv,
>      nouveau_pushbuf_validate(push);
>   
>      while (count) {
> -      unsigned nr;
> +      unsigned nr = MIN2(count, NV04_PFIFO_MAX_PACKET_LEN);
>   
> -      if (!PUSH_SPACE(push, 16))
> +      if (!PUSH_SPACE(push, nr + 9))
>            break;
> -      nr = PUSH_AVAIL(push);
> -      assert(nr >= 16);
> -      nr = MIN2(count, nr - 9);
> -      nr = MIN2(nr, NV04_PFIFO_MAX_PACKET_LEN);
>   
>         BEGIN_NVC0(push, NVC0_M2MF(OFFSET_OUT_HIGH), 2);
>         PUSH_DATAh(push, dst->offset + offset);
> @@ -234,14 +230,10 @@ nve4_p2mf_push_linear(struct nouveau_context *nv,
>      nouveau_pushbuf_validate(push);
>   
>      while (count) {
> -      unsigned nr;
> +      unsigned nr = MIN2(count, (NV04_PFIFO_MAX_PACKET_LEN - 1));
>   
> -      if (!PUSH_SPACE(push, 16))
> +      if (!PUSH_SPACE(push, nr + 10))
>            break;
> -      nr = PUSH_AVAIL(push);
> -      assert(nr >= 16);
> -      nr = MIN2(count, nr - 8);
> -      nr = MIN2(nr, (NV04_PFIFO_MAX_PACKET_LEN - 1));
>   
>         BEGIN_NVC0(push, NVE4_P2MF(UPLOAD_DST_ADDRESS_HIGH), 2);
>         PUSH_DATAh(push, dst->offset + offset);
> @@ -571,9 +563,7 @@ nvc0_cb_bo_push(struct nouveau_context *nv,
>      PUSH_DATA (push, bo->offset + base);
>   
>      while (words) {
> -      unsigned nr = PUSH_AVAIL(push);
> -      nr = MIN2(nr, words);
> -      nr = MIN2(nr, NV04_PFIFO_MAX_PACKET_LEN - 1);
> +      unsigned nr = MIN2(words, NV04_PFIFO_MAX_PACKET_LEN - 1);
>   
>         PUSH_SPACE(push, nr + 2);
>         PUSH_REFN (push, bo, NOUVEAU_BO_WR | domain);

_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/nouveau

      parent reply	other threads:[~2015-10-11 15:05 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-10  9:09 [PATCH] nv50, nvc0: don't base decisions on available pushbuf space Ilia Mirkin
2015-10-10 19:41 ` [Nouveau] " Samuel Pitoiset
     [not found]   ` <561969F1.9080706-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-10-10 19:42     ` Ilia Mirkin
     [not found]       ` <CAKb7UvgWEKVA1TWqU-Bcu=VmunnXot_Sqp11F7XC_mOowVqTUw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-10-10 19:55         ` Samuel Pitoiset
     [not found]           ` <56196D35.2040203-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-10-10 19:58             ` Ilia Mirkin
     [not found]               ` <CAKb7UvhaZn2tK9ejZ7ard79gHuxoWJRi+hLU=P6+psZSqT-sZA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-10-10 20:21                 ` Samuel Pitoiset
     [not found]                   ` <56197346.4030606-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-10-10 20:17                     ` Ilia Mirkin
2015-10-10 20:29                       ` [Nouveau] " Samuel Pitoiset
     [not found] ` <1444468187-13868-1-git-send-email-imirkin-FrUbXkNCsVf2fBVCVOL8/A@public.gmane.org>
2015-10-11 15:05   ` Samuel Pitoiset [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=561A7ACF.8070603@gmail.com \
    --to=samuel.pitoiset-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
    --cc=imirkin-FrUbXkNCsVf2fBVCVOL8/A@public.gmane.org \
    --cc=mesa-dev-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
    --cc=mesa-stable-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
    --cc=nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.