[PATCH v3] i2c: s3c2410: enable RuntimePM before registering to the core

[PATCH v3] i2c: s3c2410: enable RuntimePM before registering to the core

[Wolfram Sang]

From: Wolfram Sang <wsa+renesas@sang-engineering.com>

The core may register clients attached to this master which may use
funtionality from the master. So, RuntimePM must be enabled before, otherwise
this will fail. While here, move drvdata, too.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---

Changes since v2: don't call runtime pm on adaper if it wasn't registered

Thanks to Krzysztof for testing!

 drivers/i2c/busses/i2c-s3c2410.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 50bfd8cef5f224..5df819610d5280 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -1243,17 +1243,19 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
 	i2c->adap.nr = i2c->pdata->bus_num;
 	i2c->adap.dev.of_node = pdev->dev.of_node;
 
+	platform_set_drvdata(pdev, i2c);
+
+	pm_runtime_enable(&pdev->dev);
+
 	ret = i2c_add_numbered_adapter(&i2c->adap);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "failed to add bus to i2c core\n");
+		pm_runtime_disable(&pdev->dev);
 		s3c24xx_i2c_deregister_cpufreq(i2c);
 		clk_unprepare(i2c->clk);
 		return ret;
 	}
 
-	platform_set_drvdata(pdev, i2c);
-
-	pm_runtime_enable(&pdev->dev);
 	pm_runtime_enable(&i2c->adap.dev);
 
 	dev_info(&pdev->dev, "%s: S3C I2C adapter\n", dev_name(&i2c->adap.dev));
-- 
2.1.4

[PATCH v3] i2c: s3c2410: enable RuntimePM before registering to the core

[Wolfram Sang]

From: Wolfram Sang <wsa+renesas@sang-engineering.com>

The core may register clients attached to this master which may use
funtionality from the master. So, RuntimePM must be enabled before, otherwise
this will fail. While here, move drvdata, too.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---

Changes since v2: don't call runtime pm on adaper if it wasn't registered

Thanks to Krzysztof for testing!

 drivers/i2c/busses/i2c-s3c2410.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 50bfd8cef5f224..5df819610d5280 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -1243,17 +1243,19 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
 	i2c->adap.nr = i2c->pdata->bus_num;
 	i2c->adap.dev.of_node = pdev->dev.of_node;
 
+	platform_set_drvdata(pdev, i2c);
+
+	pm_runtime_enable(&pdev->dev);
+
 	ret = i2c_add_numbered_adapter(&i2c->adap);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "failed to add bus to i2c core\n");
+		pm_runtime_disable(&pdev->dev);
 		s3c24xx_i2c_deregister_cpufreq(i2c);
 		clk_unprepare(i2c->clk);
 		return ret;
 	}
 
-	platform_set_drvdata(pdev, i2c);
-
-	pm_runtime_enable(&pdev->dev);
 	pm_runtime_enable(&i2c->adap.dev);
 
 	dev_info(&pdev->dev, "%s: S3C I2C adapter\n", dev_name(&i2c->adap.dev));
-- 
2.1.4

Re: [PATCH v3] i2c: s3c2410: enable RuntimePM before registering to the core

[Krzysztof Kozlowski]

W dniu 10.10.2015 o 16:24, Wolfram Sang pisze:
> From: Wolfram Sang <wsa+renesas@sang-engineering.com>
> 
> The core may register clients attached to this master which may use
> funtionality from the master. So, RuntimePM must be enabled before, otherwise
> this will fail. While here, move drvdata, too.
> 
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> ---
> 
> Changes since v2: don't call runtime pm on adaper if it wasn't registered
> 
> Thanks to Krzysztof for testing!
> 
>  drivers/i2c/busses/i2c-s3c2410.c | 8 +++++---
>  1 file changed, 5 insertions(+), 3 deletions(-)

Works good. Error path seems to be working fine as well.

Tested on Odroid-XU3 Lite, on top of next-20151009.
Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>

Best regards,
Krzysztof

[PATCH v3] i2c: s3c2410: enable RuntimePM before registering to the core

[Krzysztof Kozlowski]

W dniu 10.10.2015 o 16:24, Wolfram Sang pisze:
> From: Wolfram Sang <wsa+renesas@sang-engineering.com>
> 
> The core may register clients attached to this master which may use
> funtionality from the master. So, RuntimePM must be enabled before, otherwise
> this will fail. While here, move drvdata, too.
> 
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> ---
> 
> Changes since v2: don't call runtime pm on adaper if it wasn't registered
> 
> Thanks to Krzysztof for testing!
> 
>  drivers/i2c/busses/i2c-s3c2410.c | 8 +++++---
>  1 file changed, 5 insertions(+), 3 deletions(-)

Works good. Error path seems to be working fine as well.

Tested on Odroid-XU3 Lite, on top of next-20151009.
Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>

Best regards,
Krzysztof

Re: [PATCH v3] i2c: s3c2410: enable RuntimePM before registering to the core

[Kukjin Kim]

On 10/10/15 16:24, Wolfram Sang wrote:
> From: Wolfram Sang <wsa+renesas@sang-engineering.com>
> 
> The core may register clients attached to this master which may use
> funtionality from the master. So, RuntimePM must be enabled before, otherwise
> this will fail. While here, move drvdata, too.
> 
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>

Looks good to me,

Acked-by: Kukjin Kim <kgene@kernel.org>

Thanks,
Kukjin

> ---
> 
> Changes since v2: don't call runtime pm on adaper if it wasn't registered
> 
> Thanks to Krzysztof for testing!
> 
>  drivers/i2c/busses/i2c-s3c2410.c | 8 +++++---
>  1 file changed, 5 insertions(+), 3 deletions(-)

[PATCH v3] i2c: s3c2410: enable RuntimePM before registering to the core

[Kukjin Kim]

On 10/10/15 16:24, Wolfram Sang wrote:
> From: Wolfram Sang <wsa+renesas@sang-engineering.com>
> 
> The core may register clients attached to this master which may use
> funtionality from the master. So, RuntimePM must be enabled before, otherwise
> this will fail. While here, move drvdata, too.
> 
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>

Looks good to me,

Acked-by: Kukjin Kim <kgene@kernel.org>

Thanks,
Kukjin

> ---
> 
> Changes since v2: don't call runtime pm on adaper if it wasn't registered
> 
> Thanks to Krzysztof for testing!
> 
>  drivers/i2c/busses/i2c-s3c2410.c | 8 +++++---
>  1 file changed, 5 insertions(+), 3 deletions(-)

Re: [PATCH v3] i2c: s3c2410: enable RuntimePM before registering to the core

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 433 bytes --]

On Sat, Oct 10, 2015 at 08:24:23AM +0100, Wolfram Sang wrote:
> From: Wolfram Sang <wsa+renesas@sang-engineering.com>
> 
> The core may register clients attached to this master which may use
> funtionality from the master. So, RuntimePM must be enabled before, otherwise
> this will fail. While here, move drvdata, too.
> 
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>

Applied to for-current, thanks!


[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

[PATCH v3] i2c: s3c2410: enable RuntimePM before registering to the core

[Wolfram Sang]

On Sat, Oct 10, 2015 at 08:24:23AM +0100, Wolfram Sang wrote:
> From: Wolfram Sang <wsa+renesas@sang-engineering.com>
> 
> The core may register clients attached to this master which may use
> funtionality from the master. So, RuntimePM must be enabled before, otherwise
> this will fail. While here, move drvdata, too.
> 
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>

Applied to for-current, thanks!

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20151015/a12f9049/attachment.sig>