From: Matthias Brugger <matthias.bgg@gmail.com>
To: Erin Lo <erin.lo@mediatek.com>
Cc: Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>,
Russell King <linux@arm.linux.org.uk>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, srv_heupstream@mediatek.com
Subject: Re: [PATCH v3 2/2] ARM: dts: mediatek: add MT2701 basic support
Date: Fri, 23 Oct 2015 12:48:16 +0200 [thread overview]
Message-ID: <562A1070.8070505@gmail.com> (raw)
In-Reply-To: <1445322871-14134-3-git-send-email-erin.lo@mediatek.com>
On 20/10/15 08:34, Erin Lo wrote:
> This adds basic chip support for Mediatek 2701.
>
> Signed-off-by: Erin Lo <erin.lo@mediatek.com>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/mt2701-evb.dts | 29 ++++++++
> arch/arm/boot/dts/mt2701.dtsi | 146 ++++++++++++++++++++++++++++++++++++++
> arch/arm/mach-mediatek/mediatek.c | 1 +
> 4 files changed, 177 insertions(+)
> create mode 100644 arch/arm/boot/dts/mt2701-evb.dts
> create mode 100644 arch/arm/boot/dts/mt2701.dtsi
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 233159d..aec787e 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -732,6 +732,7 @@ dtb-$(CONFIG_MACH_DOVE) += \
> dove-dove-db.dtb \
> dove-sbc-a510.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += \
> + mt2701-evb.dtb \
> mt6580-evbp1.dtb \
> mt6589-aquaris5.dtb \
> mt6592-evb.dtb \
> diff --git a/arch/arm/boot/dts/mt2701-evb.dts b/arch/arm/boot/dts/mt2701-evb.dts
> new file mode 100644
> index 0000000..082ca88
> --- /dev/null
> +++ b/arch/arm/boot/dts/mt2701-evb.dts
> @@ -0,0 +1,29 @@
> +/*
> + * Copyright (c) 2015 MediaTek Inc.
> + * Author: Erin Lo <erin.lo@mediatek.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +/dts-v1/;
> +#include "mt2701.dtsi"
> +
> +/ {
> + model = "MediaTek MT2701 evaluation board";
> + compatible = "mediatek,mt2701-evb", "mediatek,mt2701";
> +
> + memory {
> + reg = <0 0x80000000 0 0x40000000>;
> + };
> +};
> +
> +&uart0 {
> + status = "okay";
> +};
> diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
> new file mode 100644
> index 0000000..69f240f
> --- /dev/null
> +++ b/arch/arm/boot/dts/mt2701.dtsi
> @@ -0,0 +1,146 @@
> +/*
> + * Copyright (c) 2015 MediaTek Inc.
> + * Author: Erin.Lo <erin.lo@mediatek.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include "skeleton64.dtsi"
> +
> +/ {
> + compatible = "mediatek,mt2701";
> + interrupt-parent = <&sysirq>;
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu@0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a7";
> + reg = <0x0>;
> + };
> + cpu@1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a7";
> + reg = <0x1>;
> + };
> + cpu@2 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a7";
> + reg = <0x2>;
> + };
> + cpu@3 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a7";
> + reg = <0x3>;
> + };
> + };
> +
> + system_clk: dummy13m {
> + compatible = "fixed-clock";
> + clock-frequency = <13000000>;
> + #clock-cells = <0>;
> + };
> +
> + rtc_clk: dummy32k {
> + compatible = "fixed-clock";
> + clock-frequency = <32000>;
> + #clock-cells = <0>;
> + };
> +
> + uart_clk: dummy26m {
> + compatible = "fixed-clock";
> + clock-frequency = <26000000>;
> + #clock-cells = <0>;
> + };
> +
> + timer {
> + compatible = "arm,armv7-timer";
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
> + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
> + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
> + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> + };
> +
> + watchdog: watchdog@10007000 {
> + compatible = "mediatek,mt2701-wdt",
> + "mediatek,mt6589-wdt";
> + reg = <0 0x10007000 0 0x100>;
> + };
> +
> + timer: timer@10008000 {
> + compatible = "mediatek,mt2701-timer",
> + "mediatek,mt6577-timer";
> + reg = <0x10008000 0x80>;
I suppose reg should look like this:
reg = <0 0x10008000 0 0x80>;
I fixed it and pushed the patch to v4.4-next/dts
Please let me know if this is not working, I have no hardware to test it.
> + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&system_clk>, <&rtc_clk>;
> + clock-names = "system-clk", "rtc-clk";
> + };
> +
> + sysirq: interrupt-controller@10200100 {
> + compatible = "mediatek,mt2701-sysirq",
> + "mediatek,mt6577-sysirq";
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + interrupt-parent = <&gic>;
> + reg = <0 0x10200100 0 0x1c>;
> + };
> +
> + gic: interrupt-controller@10211000 {
> + compatible = "arm,cortex-a7-gic";
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + interrupt-parent = <&gic>;
> + reg = <0 0x10211000 0 0x1000>,
> + <0 0x10212000 0 0x1000>,
> + <0 0x10214000 0 0x2000>,
> + <0 0x10216000 0 0x2000>;
> + };
> +
> + uart0: serial@11002000 {
> + compatible = "mediatek,mt2701-uart",
> + "mediatek,mt6577-uart";
> + reg = <0 0x11002000 0 0x400>;
> + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&uart_clk>;
> + status = "disabled";
> + };
> +
> + uart1: serial@11003000 {
> + compatible = "mediatek,mt2701-uart",
> + "mediatek,mt6577-uart";
> + reg = <0 0x11003000 0 0x400>;
> + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&uart_clk>;
> + status = "disabled";
> + };
> +
> + uart2: serial@11004000 {
> + compatible = "mediatek,mt2701-uart",
> + "mediatek,mt6577-uart";
> + reg = <0 0x11004000 0 0x400>;
> + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&uart_clk>;
> + status = "disabled";
> + };
> +
> + uart3: serial@11005000 {
> + compatible = "mediatek,mt2701-uart",
> + "mediatek,mt6577-uart";
> + reg = <0 0x11005000 0 0x400>;
> + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&uart_clk>;
> + status = "disabled";
> + };
> +};
> diff --git a/arch/arm/mach-mediatek/mediatek.c b/arch/arm/mach-mediatek/mediatek.c
> index a954900..1b98f7a 100644
> --- a/arch/arm/mach-mediatek/mediatek.c
> +++ b/arch/arm/mach-mediatek/mediatek.c
> @@ -18,6 +18,7 @@
> #include <asm/mach/arch.h>
>
> static const char * const mediatek_board_dt_compat[] = {
> + "mediatek,mt2701",
> "mediatek,mt6589",
> "mediatek,mt6592",
> "mediatek,mt8127",
>
WARNING: multiple messages have this Message-ID (diff)
From: matthias.bgg@gmail.com (Matthias Brugger)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 2/2] ARM: dts: mediatek: add MT2701 basic support
Date: Fri, 23 Oct 2015 12:48:16 +0200 [thread overview]
Message-ID: <562A1070.8070505@gmail.com> (raw)
In-Reply-To: <1445322871-14134-3-git-send-email-erin.lo@mediatek.com>
On 20/10/15 08:34, Erin Lo wrote:
> This adds basic chip support for Mediatek 2701.
>
> Signed-off-by: Erin Lo <erin.lo@mediatek.com>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/mt2701-evb.dts | 29 ++++++++
> arch/arm/boot/dts/mt2701.dtsi | 146 ++++++++++++++++++++++++++++++++++++++
> arch/arm/mach-mediatek/mediatek.c | 1 +
> 4 files changed, 177 insertions(+)
> create mode 100644 arch/arm/boot/dts/mt2701-evb.dts
> create mode 100644 arch/arm/boot/dts/mt2701.dtsi
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 233159d..aec787e 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -732,6 +732,7 @@ dtb-$(CONFIG_MACH_DOVE) += \
> dove-dove-db.dtb \
> dove-sbc-a510.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += \
> + mt2701-evb.dtb \
> mt6580-evbp1.dtb \
> mt6589-aquaris5.dtb \
> mt6592-evb.dtb \
> diff --git a/arch/arm/boot/dts/mt2701-evb.dts b/arch/arm/boot/dts/mt2701-evb.dts
> new file mode 100644
> index 0000000..082ca88
> --- /dev/null
> +++ b/arch/arm/boot/dts/mt2701-evb.dts
> @@ -0,0 +1,29 @@
> +/*
> + * Copyright (c) 2015 MediaTek Inc.
> + * Author: Erin Lo <erin.lo@mediatek.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +/dts-v1/;
> +#include "mt2701.dtsi"
> +
> +/ {
> + model = "MediaTek MT2701 evaluation board";
> + compatible = "mediatek,mt2701-evb", "mediatek,mt2701";
> +
> + memory {
> + reg = <0 0x80000000 0 0x40000000>;
> + };
> +};
> +
> +&uart0 {
> + status = "okay";
> +};
> diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
> new file mode 100644
> index 0000000..69f240f
> --- /dev/null
> +++ b/arch/arm/boot/dts/mt2701.dtsi
> @@ -0,0 +1,146 @@
> +/*
> + * Copyright (c) 2015 MediaTek Inc.
> + * Author: Erin.Lo <erin.lo@mediatek.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include "skeleton64.dtsi"
> +
> +/ {
> + compatible = "mediatek,mt2701";
> + interrupt-parent = <&sysirq>;
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu at 0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a7";
> + reg = <0x0>;
> + };
> + cpu at 1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a7";
> + reg = <0x1>;
> + };
> + cpu at 2 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a7";
> + reg = <0x2>;
> + };
> + cpu at 3 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a7";
> + reg = <0x3>;
> + };
> + };
> +
> + system_clk: dummy13m {
> + compatible = "fixed-clock";
> + clock-frequency = <13000000>;
> + #clock-cells = <0>;
> + };
> +
> + rtc_clk: dummy32k {
> + compatible = "fixed-clock";
> + clock-frequency = <32000>;
> + #clock-cells = <0>;
> + };
> +
> + uart_clk: dummy26m {
> + compatible = "fixed-clock";
> + clock-frequency = <26000000>;
> + #clock-cells = <0>;
> + };
> +
> + timer {
> + compatible = "arm,armv7-timer";
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
> + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
> + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
> + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> + };
> +
> + watchdog: watchdog at 10007000 {
> + compatible = "mediatek,mt2701-wdt",
> + "mediatek,mt6589-wdt";
> + reg = <0 0x10007000 0 0x100>;
> + };
> +
> + timer: timer at 10008000 {
> + compatible = "mediatek,mt2701-timer",
> + "mediatek,mt6577-timer";
> + reg = <0x10008000 0x80>;
I suppose reg should look like this:
reg = <0 0x10008000 0 0x80>;
I fixed it and pushed the patch to v4.4-next/dts
Please let me know if this is not working, I have no hardware to test it.
> + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&system_clk>, <&rtc_clk>;
> + clock-names = "system-clk", "rtc-clk";
> + };
> +
> + sysirq: interrupt-controller at 10200100 {
> + compatible = "mediatek,mt2701-sysirq",
> + "mediatek,mt6577-sysirq";
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + interrupt-parent = <&gic>;
> + reg = <0 0x10200100 0 0x1c>;
> + };
> +
> + gic: interrupt-controller at 10211000 {
> + compatible = "arm,cortex-a7-gic";
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + interrupt-parent = <&gic>;
> + reg = <0 0x10211000 0 0x1000>,
> + <0 0x10212000 0 0x1000>,
> + <0 0x10214000 0 0x2000>,
> + <0 0x10216000 0 0x2000>;
> + };
> +
> + uart0: serial at 11002000 {
> + compatible = "mediatek,mt2701-uart",
> + "mediatek,mt6577-uart";
> + reg = <0 0x11002000 0 0x400>;
> + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&uart_clk>;
> + status = "disabled";
> + };
> +
> + uart1: serial at 11003000 {
> + compatible = "mediatek,mt2701-uart",
> + "mediatek,mt6577-uart";
> + reg = <0 0x11003000 0 0x400>;
> + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&uart_clk>;
> + status = "disabled";
> + };
> +
> + uart2: serial at 11004000 {
> + compatible = "mediatek,mt2701-uart",
> + "mediatek,mt6577-uart";
> + reg = <0 0x11004000 0 0x400>;
> + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&uart_clk>;
> + status = "disabled";
> + };
> +
> + uart3: serial at 11005000 {
> + compatible = "mediatek,mt2701-uart",
> + "mediatek,mt6577-uart";
> + reg = <0 0x11005000 0 0x400>;
> + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&uart_clk>;
> + status = "disabled";
> + };
> +};
> diff --git a/arch/arm/mach-mediatek/mediatek.c b/arch/arm/mach-mediatek/mediatek.c
> index a954900..1b98f7a 100644
> --- a/arch/arm/mach-mediatek/mediatek.c
> +++ b/arch/arm/mach-mediatek/mediatek.c
> @@ -18,6 +18,7 @@
> #include <asm/mach/arch.h>
>
> static const char * const mediatek_board_dt_compat[] = {
> + "mediatek,mt2701",
> "mediatek,mt6589",
> "mediatek,mt6592",
> "mediatek,mt8127",
>
next prev parent reply other threads:[~2015-10-23 10:48 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-20 6:34 [PATCH v3 0/2] Add basic support for Mediatek MT2701 SoC Erin Lo
2015-10-20 6:34 ` Erin Lo
2015-10-20 6:34 ` Erin Lo
[not found] ` <1445322871-14134-1-git-send-email-erin.lo-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2015-10-20 6:34 ` [PATCH v3 1/2] Document: DT: Add bindings for mediatek MT2701 SoC Platform Erin Lo
2015-10-20 6:34 ` Erin Lo
2015-10-20 6:34 ` Erin Lo
[not found] ` <1445322871-14134-2-git-send-email-erin.lo-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2015-10-22 1:25 ` Rob Herring
2015-10-22 1:25 ` Rob Herring
2015-10-22 1:25 ` Rob Herring
2015-10-20 6:34 ` [PATCH v3 2/2] ARM: dts: mediatek: add MT2701 basic support Erin Lo
2015-10-20 6:34 ` Erin Lo
2015-10-20 6:34 ` Erin Lo
2015-10-23 10:48 ` Matthias Brugger [this message]
2015-10-23 10:48 ` Matthias Brugger
[not found] ` <562A1070.8070505-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-10-26 7:10 ` erin.lo
2015-10-26 7:10 ` erin.lo
2015-10-23 10:49 ` [PATCH v3 0/2] Add basic support for Mediatek MT2701 SoC Matthias Brugger
2015-10-23 10:49 ` Matthias Brugger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=562A1070.8070505@gmail.com \
--to=matthias.bgg@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=erin.lo@mediatek.com \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux@arm.linux.org.uk \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=srv_heupstream@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.