All of lore.kernel.org
 help / color / mirror / Atom feed
From: Anton Bondarenko <anton.bondarenko.sama-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
	b38343-KZfg59tc24xl57MIdRCFDg@public.gmane.org
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	vladimir_zapolskiy-nmGgyN9QBj3QT0dZR+AlfA@public.gmane.org,
	jiada_wang-nmGgyN9QBj3QT0dZR+AlfA@public.gmane.org,
	s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org
Subject: Re: [PATCH v3 5/7] spi: imx: Add support for loopback for ECSPI controllers
Date: Sat, 14 Nov 2015 11:06:13 +0100	[thread overview]
Message-ID: <56470795.8090602@gmail.com> (raw)
In-Reply-To: <1446388901-6073-6-git-send-email-anton.bondarenko.sama-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>



On 01.11.2015 15:41, Anton Bondarenko wrote:
> From: Anton Bondarenko <anton_bondarenko-nmGgyN9QBj3QT0dZR+AlfA@public.gmane.org>
>
> Support for ECSPI loopback for IMX51,IMX53 and IMX6Q using TEST register.
>
> Signed-off-by: Mohsin Kazmi <mohsin_kazmi-nmGgyN9QBj3QT0dZR+AlfA@public.gmane.org>
> Signed-off-by: Anton Bondarenko <anton_bondarenko-nmGgyN9QBj3QT0dZR+AlfA@public.gmane.org>
> ---
>   drivers/spi/spi-imx.c | 19 ++++++++++++++++---
>   1 file changed, 16 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
> index 48fdfa1..dc492e2 100644
> --- a/drivers/spi/spi-imx.c
> +++ b/drivers/spi/spi-imx.c
> @@ -270,6 +270,9 @@ static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi,
>   #define MX51_ECSPI_STAT		0x18
>   #define MX51_ECSPI_STAT_RR		(1 <<  3)
>
> +#define MX51_ECSPI_TEST			0x20
> +#define MX51_ECSPI_LOOP			BIT(31)
> +
>   /* MX51 eCSPI */
>   static unsigned int mx51_ecspi_clkdiv(unsigned int fin, unsigned int fspi,
>   				      unsigned int *fres)
> @@ -343,6 +346,7 @@ static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx,
>   	u32 ctrl = MX51_ECSPI_CTRL_ENABLE, dma = 0;
>   	u32 cfg = readl(spi_imx->base + MX51_ECSPI_CONFIG);
>   	u32 delay;
> +	u32 lpb = 0;
>
>   	/*
>   	 * The hardware seems to have a race condition when changing modes. The
> @@ -385,6 +389,12 @@ static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx,
>   	writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
>   	writel(cfg, spi_imx->base + MX51_ECSPI_CONFIG);
>
> +	if (config->mode & SPI_LOOP)
> +		lpb |= MX51_ECSPI_LOOP;
> +
> +	if ((readl(spi_imx->base + MX51_ECSPI_TEST) & MX51_ECSPI_LOOP) != lpb)
> +		writel(lpb, spi_imx->base + MX51_ECSPI_TEST);
> +
>   	/*
>   	 * Wait until the changes in the configuration register CONFIGREG
>   	 * propagate into the hardware. It takes exactly one tick of the
> @@ -1262,6 +1272,9 @@ static int spi_imx_probe(struct platform_device *pdev)
>   	spi_imx = spi_master_get_devdata(master);
>   	spi_imx->bitbang.master = master;
>
> +	spi_imx->devtype_data = of_id ? of_id->data :
> +		(struct spi_imx_devtype_data *)pdev->id_entry->driver_data;
> +
>   	for (i = 0; i < master->num_chipselect; i++) {
>   		int cs_gpio = of_get_named_gpio(np, "cs-gpios", i);
>   		if (!gpio_is_valid(cs_gpio) && mxc_platform_info)
> @@ -1288,10 +1301,10 @@ static int spi_imx_probe(struct platform_device *pdev)
>   	spi_imx->bitbang.master->unprepare_message = spi_imx_unprepare_message;
>   	spi_imx->bitbang.master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
>
> -	init_completion(&spi_imx->xfer_done);
> +	if (is_imx51_ecspi(spi_imx))
> +		spi_imx->bitbang.master->mode_bits |= SPI_LOOP;
>
> -	spi_imx->devtype_data = of_id ? of_id->data :
> -		(struct spi_imx_devtype_data *) pdev->id_entry->driver_data;
> +	init_completion(&spi_imx->xfer_done);
>
>   	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>   	spi_imx->base = devm_ioremap_resource(&pdev->dev, res);
>

Does anyone has other comments regarding this commit?

Regards, Anton
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

WARNING: multiple messages have this Message-ID (diff)
From: anton.bondarenko.sama@gmail.com (Anton Bondarenko)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 5/7] spi: imx: Add support for loopback for ECSPI controllers
Date: Sat, 14 Nov 2015 11:06:13 +0100	[thread overview]
Message-ID: <56470795.8090602@gmail.com> (raw)
In-Reply-To: <1446388901-6073-6-git-send-email-anton.bondarenko.sama@gmail.com>



On 01.11.2015 15:41, Anton Bondarenko wrote:
> From: Anton Bondarenko <anton_bondarenko@mentor.com>
>
> Support for ECSPI loopback for IMX51,IMX53 and IMX6Q using TEST register.
>
> Signed-off-by: Mohsin Kazmi <mohsin_kazmi@mentor.com>
> Signed-off-by: Anton Bondarenko <anton_bondarenko@mentor.com>
> ---
>   drivers/spi/spi-imx.c | 19 ++++++++++++++++---
>   1 file changed, 16 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
> index 48fdfa1..dc492e2 100644
> --- a/drivers/spi/spi-imx.c
> +++ b/drivers/spi/spi-imx.c
> @@ -270,6 +270,9 @@ static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi,
>   #define MX51_ECSPI_STAT		0x18
>   #define MX51_ECSPI_STAT_RR		(1 <<  3)
>
> +#define MX51_ECSPI_TEST			0x20
> +#define MX51_ECSPI_LOOP			BIT(31)
> +
>   /* MX51 eCSPI */
>   static unsigned int mx51_ecspi_clkdiv(unsigned int fin, unsigned int fspi,
>   				      unsigned int *fres)
> @@ -343,6 +346,7 @@ static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx,
>   	u32 ctrl = MX51_ECSPI_CTRL_ENABLE, dma = 0;
>   	u32 cfg = readl(spi_imx->base + MX51_ECSPI_CONFIG);
>   	u32 delay;
> +	u32 lpb = 0;
>
>   	/*
>   	 * The hardware seems to have a race condition when changing modes. The
> @@ -385,6 +389,12 @@ static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx,
>   	writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
>   	writel(cfg, spi_imx->base + MX51_ECSPI_CONFIG);
>
> +	if (config->mode & SPI_LOOP)
> +		lpb |= MX51_ECSPI_LOOP;
> +
> +	if ((readl(spi_imx->base + MX51_ECSPI_TEST) & MX51_ECSPI_LOOP) != lpb)
> +		writel(lpb, spi_imx->base + MX51_ECSPI_TEST);
> +
>   	/*
>   	 * Wait until the changes in the configuration register CONFIGREG
>   	 * propagate into the hardware. It takes exactly one tick of the
> @@ -1262,6 +1272,9 @@ static int spi_imx_probe(struct platform_device *pdev)
>   	spi_imx = spi_master_get_devdata(master);
>   	spi_imx->bitbang.master = master;
>
> +	spi_imx->devtype_data = of_id ? of_id->data :
> +		(struct spi_imx_devtype_data *)pdev->id_entry->driver_data;
> +
>   	for (i = 0; i < master->num_chipselect; i++) {
>   		int cs_gpio = of_get_named_gpio(np, "cs-gpios", i);
>   		if (!gpio_is_valid(cs_gpio) && mxc_platform_info)
> @@ -1288,10 +1301,10 @@ static int spi_imx_probe(struct platform_device *pdev)
>   	spi_imx->bitbang.master->unprepare_message = spi_imx_unprepare_message;
>   	spi_imx->bitbang.master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
>
> -	init_completion(&spi_imx->xfer_done);
> +	if (is_imx51_ecspi(spi_imx))
> +		spi_imx->bitbang.master->mode_bits |= SPI_LOOP;
>
> -	spi_imx->devtype_data = of_id ? of_id->data :
> -		(struct spi_imx_devtype_data *) pdev->id_entry->driver_data;
> +	init_completion(&spi_imx->xfer_done);
>
>   	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>   	spi_imx->base = devm_ioremap_resource(&pdev->dev, res);
>

Does anyone has other comments regarding this commit?

Regards, Anton

WARNING: multiple messages have this Message-ID (diff)
From: Anton Bondarenko <anton.bondarenko.sama@gmail.com>
To: broonie@kernel.org, b38343@freescale.com
Cc: linux-kernel@vger.kernel.org, linux-spi@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	vladimir_zapolskiy@mentor.com, jiada_wang@mentor.com,
	s.hauer@pengutronix.de
Subject: Re: [PATCH v3 5/7] spi: imx: Add support for loopback for ECSPI controllers
Date: Sat, 14 Nov 2015 11:06:13 +0100	[thread overview]
Message-ID: <56470795.8090602@gmail.com> (raw)
In-Reply-To: <1446388901-6073-6-git-send-email-anton.bondarenko.sama@gmail.com>



On 01.11.2015 15:41, Anton Bondarenko wrote:
> From: Anton Bondarenko <anton_bondarenko@mentor.com>
>
> Support for ECSPI loopback for IMX51,IMX53 and IMX6Q using TEST register.
>
> Signed-off-by: Mohsin Kazmi <mohsin_kazmi@mentor.com>
> Signed-off-by: Anton Bondarenko <anton_bondarenko@mentor.com>
> ---
>   drivers/spi/spi-imx.c | 19 ++++++++++++++++---
>   1 file changed, 16 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
> index 48fdfa1..dc492e2 100644
> --- a/drivers/spi/spi-imx.c
> +++ b/drivers/spi/spi-imx.c
> @@ -270,6 +270,9 @@ static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi,
>   #define MX51_ECSPI_STAT		0x18
>   #define MX51_ECSPI_STAT_RR		(1 <<  3)
>
> +#define MX51_ECSPI_TEST			0x20
> +#define MX51_ECSPI_LOOP			BIT(31)
> +
>   /* MX51 eCSPI */
>   static unsigned int mx51_ecspi_clkdiv(unsigned int fin, unsigned int fspi,
>   				      unsigned int *fres)
> @@ -343,6 +346,7 @@ static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx,
>   	u32 ctrl = MX51_ECSPI_CTRL_ENABLE, dma = 0;
>   	u32 cfg = readl(spi_imx->base + MX51_ECSPI_CONFIG);
>   	u32 delay;
> +	u32 lpb = 0;
>
>   	/*
>   	 * The hardware seems to have a race condition when changing modes. The
> @@ -385,6 +389,12 @@ static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx,
>   	writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
>   	writel(cfg, spi_imx->base + MX51_ECSPI_CONFIG);
>
> +	if (config->mode & SPI_LOOP)
> +		lpb |= MX51_ECSPI_LOOP;
> +
> +	if ((readl(spi_imx->base + MX51_ECSPI_TEST) & MX51_ECSPI_LOOP) != lpb)
> +		writel(lpb, spi_imx->base + MX51_ECSPI_TEST);
> +
>   	/*
>   	 * Wait until the changes in the configuration register CONFIGREG
>   	 * propagate into the hardware. It takes exactly one tick of the
> @@ -1262,6 +1272,9 @@ static int spi_imx_probe(struct platform_device *pdev)
>   	spi_imx = spi_master_get_devdata(master);
>   	spi_imx->bitbang.master = master;
>
> +	spi_imx->devtype_data = of_id ? of_id->data :
> +		(struct spi_imx_devtype_data *)pdev->id_entry->driver_data;
> +
>   	for (i = 0; i < master->num_chipselect; i++) {
>   		int cs_gpio = of_get_named_gpio(np, "cs-gpios", i);
>   		if (!gpio_is_valid(cs_gpio) && mxc_platform_info)
> @@ -1288,10 +1301,10 @@ static int spi_imx_probe(struct platform_device *pdev)
>   	spi_imx->bitbang.master->unprepare_message = spi_imx_unprepare_message;
>   	spi_imx->bitbang.master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
>
> -	init_completion(&spi_imx->xfer_done);
> +	if (is_imx51_ecspi(spi_imx))
> +		spi_imx->bitbang.master->mode_bits |= SPI_LOOP;
>
> -	spi_imx->devtype_data = of_id ? of_id->data :
> -		(struct spi_imx_devtype_data *) pdev->id_entry->driver_data;
> +	init_completion(&spi_imx->xfer_done);
>
>   	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>   	spi_imx->base = devm_ioremap_resource(&pdev->dev, res);
>

Does anyone has other comments regarding this commit?

Regards, Anton

  parent reply	other threads:[~2015-11-14 10:06 UTC|newest]

Thread overview: 70+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-11-01 14:41 [PATCH v3 0/7] Improvements for SPI IMX driver for Freescale IMX51, IMX53 and IMX6 Anton Bondarenko
2015-11-01 14:41 ` Anton Bondarenko
2015-11-01 14:41 ` Anton Bondarenko
2015-11-01 14:41 ` [PATCH v3 1/7] spi: imx: Fix DMA transfer Anton Bondarenko
2015-11-01 14:41   ` Anton Bondarenko
2015-11-01 14:41   ` Anton Bondarenko
2015-11-03  7:08   ` Robin Gong
2015-11-03  7:08     ` Robin Gong
2015-11-04 21:03     ` Anton Bondarenko
2015-11-04 21:03       ` Anton Bondarenko
2015-11-04 21:03       ` Anton Bondarenko
2015-11-05  8:34   ` Sascha Hauer
2015-11-05  8:34     ` Sascha Hauer
     [not found]     ` <20151105083422.GH8526-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2015-11-05 16:51       ` Anton Bondarenko
2015-11-05 16:51         ` Anton Bondarenko
2015-11-05 16:51         ` Anton Bondarenko
     [not found]         ` <563B88FD.8050702-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-11-14 10:02           ` Anton Bondarenko
2015-11-14 10:02             ` Anton Bondarenko
2015-11-14 10:02             ` Anton Bondarenko
2015-11-01 14:41 ` [PATCH v3 5/7] spi: imx: Add support for loopback for ECSPI controllers Anton Bondarenko
2015-11-01 14:41   ` Anton Bondarenko
     [not found]   ` <1446388901-6073-6-git-send-email-anton.bondarenko.sama-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-11-14 10:06     ` Anton Bondarenko [this message]
2015-11-14 10:06       ` Anton Bondarenko
2015-11-14 10:06       ` Anton Bondarenko
     [not found] ` <1446388901-6073-1-git-send-email-anton.bondarenko.sama-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-11-01 14:41   ` [PATCH v3 2/7] spi: imx: replace fixed timeout with calculated one Anton Bondarenko
2015-11-01 14:41     ` Anton Bondarenko
2015-11-01 14:41     ` Anton Bondarenko
2015-11-05  8:47     ` Sascha Hauer
2015-11-05  8:47       ` Sascha Hauer
     [not found]       ` <20151105084723.GI8526-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2015-11-10 20:20         ` Anton Bondarenko
2015-11-10 20:20           ` Anton Bondarenko
2015-11-10 20:20           ` Anton Bondarenko
2015-11-11  8:12           ` Sascha Hauer
2015-11-11  8:12             ` Sascha Hauer
2015-11-14 10:01             ` Anton Bondarenko
2015-11-14 10:01               ` Anton Bondarenko
2015-11-01 14:41   ` [PATCH v3 3/7] spi: imx: add support for all SPI word width for DMA transfer Anton Bondarenko
2015-11-01 14:41     ` Anton Bondarenko
2015-11-01 14:41     ` Anton Bondarenko
     [not found]     ` <1446388901-6073-4-git-send-email-anton.bondarenko.sama-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-11-14 10:08       ` Anton Bondarenko
2015-11-14 10:08         ` Anton Bondarenko
2015-11-14 10:08         ` Anton Bondarenko
2015-11-01 14:41   ` [PATCH v3 4/7] spi: imx: add function to check for IMX51 family controller Anton Bondarenko
2015-11-01 14:41     ` Anton Bondarenko
2015-11-01 14:41     ` Anton Bondarenko
2015-11-14 10:06     ` Anton Bondarenko
2015-11-14 10:06       ` Anton Bondarenko
2015-11-01 14:41   ` [PATCH v3 6/7] spi: imx: return error from dma channel request Anton Bondarenko
2015-11-01 14:41     ` Anton Bondarenko
2015-11-01 14:41     ` Anton Bondarenko
     [not found]     ` <1446388901-6073-7-git-send-email-anton.bondarenko.sama-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-11-05  8:56       ` Sascha Hauer
2015-11-05  8:56         ` Sascha Hauer
2015-11-05  8:56         ` Sascha Hauer
2015-11-05 16:00         ` Anton Bondarenko
2015-11-05 16:00           ` Anton Bondarenko
2015-11-14 10:03           ` Anton Bondarenko
2015-11-14 10:03             ` Anton Bondarenko
     [not found]           ` <563B7D1C.7010105-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-11-14 10:05             ` Anton Bondarenko
2015-11-14 10:05               ` Anton Bondarenko
2015-11-14 10:05               ` Anton Bondarenko
2015-11-01 14:41   ` [PATCH v3 7/7] spi: imx: defer spi initialization, if DMA engine is pending Anton Bondarenko
2015-11-01 14:41     ` Anton Bondarenko
2015-11-01 14:41     ` Anton Bondarenko
2015-11-05  8:59     ` Sascha Hauer
2015-11-05  8:59       ` Sascha Hauer
2015-11-05 16:18       ` Anton Bondarenko
2015-11-05 16:18         ` Anton Bondarenko
     [not found]         ` <563B8157.9030104-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-11-14 10:03           ` Anton Bondarenko
2015-11-14 10:03             ` Anton Bondarenko
2015-11-14 10:03             ` Anton Bondarenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=56470795.8090602@gmail.com \
    --to=anton.bondarenko.sama-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
    --cc=b38343-KZfg59tc24xl57MIdRCFDg@public.gmane.org \
    --cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=jiada_wang-nmGgyN9QBj3QT0dZR+AlfA@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
    --cc=vladimir_zapolskiy-nmGgyN9QBj3QT0dZR+AlfA@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.