* [PATCH 0/2] ARM: dts: NSP: clean-ups and I2C support @ 2015-11-17 19:55 ` Jon Mason 0 siblings, 0 replies; 12+ messages in thread From: Jon Mason @ 2015-11-17 19:55 UTC (permalink / raw) To: linux-arm-kernel Minor changes to the Broadcom Northstar Plus device tree to make it more organized and clean, and adding I2C support (device tree only change needed for support). Jon Mason (2): ARM: dts: NSP: Device Tree clean-ups ARM: dts: NSP: Add I2C support to the DT arch/arm/boot/dts/bcm-nsp.dtsi | 59 ++++++++++++++++++++++++------------------ 1 file changed, 34 insertions(+), 25 deletions(-) -- 1.9.1 ^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 0/2] ARM: dts: NSP: clean-ups and I2C support @ 2015-11-17 19:55 ` Jon Mason 0 siblings, 0 replies; 12+ messages in thread From: Jon Mason @ 2015-11-17 19:55 UTC (permalink / raw) To: Florian Fainelli, Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Russell King Cc: devicetree, linux-arm-kernel, linux-kernel, bcm-kernel-feedback-list Minor changes to the Broadcom Northstar Plus device tree to make it more organized and clean, and adding I2C support (device tree only change needed for support). Jon Mason (2): ARM: dts: NSP: Device Tree clean-ups ARM: dts: NSP: Add I2C support to the DT arch/arm/boot/dts/bcm-nsp.dtsi | 59 ++++++++++++++++++++++++------------------ 1 file changed, 34 insertions(+), 25 deletions(-) -- 1.9.1 ^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 0/2] ARM: dts: NSP: clean-ups and I2C support @ 2015-11-17 19:55 ` Jon Mason 0 siblings, 0 replies; 12+ messages in thread From: Jon Mason @ 2015-11-17 19:55 UTC (permalink / raw) To: Florian Fainelli, Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Russell King Cc: devicetree, linux-arm-kernel, linux-kernel, bcm-kernel-feedback-list Minor changes to the Broadcom Northstar Plus device tree to make it more organized and clean, and adding I2C support (device tree only change needed for support). Jon Mason (2): ARM: dts: NSP: Device Tree clean-ups ARM: dts: NSP: Add I2C support to the DT arch/arm/boot/dts/bcm-nsp.dtsi | 59 ++++++++++++++++++++++++------------------ 1 file changed, 34 insertions(+), 25 deletions(-) -- 1.9.1 ^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 1/2] ARM: dts: NSP: Device Tree clean-ups 2015-11-17 19:55 ` Jon Mason (?) @ 2015-11-17 19:55 ` Jon Mason -1 siblings, 0 replies; 12+ messages in thread From: Jon Mason @ 2015-11-17 19:55 UTC (permalink / raw) To: linux-arm-kernel Minor changes to the Broadcom Northstar Plus device tree to make it more organized and clean. Firstly, move the GIC and L2 cache entries to be sequential with respect to the memory addresses. Secondly, modify the address portion of the entry names to reflect the difference from the range modification. Signed-off-by: Jon Mason <jonmason@broadcom.com> --- arch/arm/boot/dts/bcm-nsp.dtsi | 50 +++++++++++++++++++++--------------------- 1 file changed, 25 insertions(+), 25 deletions(-) diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index 4bcdd28..7335a74 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -58,30 +58,14 @@ }; }; - L2: l2-cache { - compatible = "arm,pl310-cache"; - reg = <0x2000 0x1000>; - cache-unified; - cache-level = <2>; - }; - - gic: interrupt-controller at 19021000 { - compatible = "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - #address-cells = <0>; - interrupt-controller; - reg = <0x1000 0x1000>, - <0x0100 0x100>; - }; - - timer at 19020200 { + timer at 0200 { compatible = "arm,cortex-a9-global-timer"; reg = <0x0200 0x100>; interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>; clocks = <&periph_clk>; }; - twd-timer at 19020600 { + twd-timer at 0600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x0600 0x20>; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | @@ -89,13 +73,29 @@ clocks = <&periph_clk>; }; - twd-watchdog at 19020620 { + twd-watchdog at 0620 { compatible = "arm,cortex-a9-twd-wdt"; reg = <0x0620 0x20>; interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; clocks = <&periph_clk>; }; + + gic: interrupt-controller at 1000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x1000 0x1000>, + <0x0100 0x100>; + }; + + L2: l2-cache { + compatible = "arm,pl310-cache"; + reg = <0x2000 0x1000>; + cache-unified; + cache-level = <2>; + }; }; clocks { @@ -116,7 +116,7 @@ #address-cells = <1>; #size-cells = <1>; - uart0: serial at 18000300 { + uart0: serial at 0300 { compatible = "ns16550a"; reg = <0x0300 0x100>; interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; @@ -124,7 +124,7 @@ status = "disabled"; }; - uart1: serial at 18000400 { + uart1: serial at 0400 { compatible = "ns16550a"; reg = <0x0400 0x100>; interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; @@ -132,7 +132,7 @@ status = "disabled"; }; - pcie0: pcie at 18012000 { + pcie0: pcie at 12000 { compatible = "brcm,iproc-pcie"; reg = <0x12000 0x1000>; @@ -156,7 +156,7 @@ status = "disabled"; }; - pcie1: pcie at 18013000 { + pcie1: pcie at 13000 { compatible = "brcm,iproc-pcie"; reg = <0x13000 0x1000>; @@ -180,7 +180,7 @@ status = "disabled"; }; - pcie2: pcie at 18014000 { + pcie2: pcie at 14000 { compatible = "brcm,iproc-pcie"; reg = <0x14000 0x1000>; @@ -204,7 +204,7 @@ status = "disabled"; }; - nand: nand at 18026000 { + nand: nand at 26000 { compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; reg = <0x026000 0x600>, <0x11b408 0x600>, -- 1.9.1 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 1/2] ARM: dts: NSP: Device Tree clean-ups @ 2015-11-17 19:55 ` Jon Mason 0 siblings, 0 replies; 12+ messages in thread From: Jon Mason @ 2015-11-17 19:55 UTC (permalink / raw) To: Florian Fainelli, Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Russell King Cc: devicetree, linux-arm-kernel, linux-kernel, bcm-kernel-feedback-list Minor changes to the Broadcom Northstar Plus device tree to make it more organized and clean. Firstly, move the GIC and L2 cache entries to be sequential with respect to the memory addresses. Secondly, modify the address portion of the entry names to reflect the difference from the range modification. Signed-off-by: Jon Mason <jonmason@broadcom.com> --- arch/arm/boot/dts/bcm-nsp.dtsi | 50 +++++++++++++++++++++--------------------- 1 file changed, 25 insertions(+), 25 deletions(-) diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index 4bcdd28..7335a74 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -58,30 +58,14 @@ }; }; - L2: l2-cache { - compatible = "arm,pl310-cache"; - reg = <0x2000 0x1000>; - cache-unified; - cache-level = <2>; - }; - - gic: interrupt-controller@19021000 { - compatible = "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - #address-cells = <0>; - interrupt-controller; - reg = <0x1000 0x1000>, - <0x0100 0x100>; - }; - - timer@19020200 { + timer@0200 { compatible = "arm,cortex-a9-global-timer"; reg = <0x0200 0x100>; interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>; clocks = <&periph_clk>; }; - twd-timer@19020600 { + twd-timer@0600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x0600 0x20>; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | @@ -89,13 +73,29 @@ clocks = <&periph_clk>; }; - twd-watchdog@19020620 { + twd-watchdog@0620 { compatible = "arm,cortex-a9-twd-wdt"; reg = <0x0620 0x20>; interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; clocks = <&periph_clk>; }; + + gic: interrupt-controller@1000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x1000 0x1000>, + <0x0100 0x100>; + }; + + L2: l2-cache { + compatible = "arm,pl310-cache"; + reg = <0x2000 0x1000>; + cache-unified; + cache-level = <2>; + }; }; clocks { @@ -116,7 +116,7 @@ #address-cells = <1>; #size-cells = <1>; - uart0: serial@18000300 { + uart0: serial@0300 { compatible = "ns16550a"; reg = <0x0300 0x100>; interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; @@ -124,7 +124,7 @@ status = "disabled"; }; - uart1: serial@18000400 { + uart1: serial@0400 { compatible = "ns16550a"; reg = <0x0400 0x100>; interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; @@ -132,7 +132,7 @@ status = "disabled"; }; - pcie0: pcie@18012000 { + pcie0: pcie@12000 { compatible = "brcm,iproc-pcie"; reg = <0x12000 0x1000>; @@ -156,7 +156,7 @@ status = "disabled"; }; - pcie1: pcie@18013000 { + pcie1: pcie@13000 { compatible = "brcm,iproc-pcie"; reg = <0x13000 0x1000>; @@ -180,7 +180,7 @@ status = "disabled"; }; - pcie2: pcie@18014000 { + pcie2: pcie@14000 { compatible = "brcm,iproc-pcie"; reg = <0x14000 0x1000>; @@ -204,7 +204,7 @@ status = "disabled"; }; - nand: nand@18026000 { + nand: nand@26000 { compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; reg = <0x026000 0x600>, <0x11b408 0x600>, -- 1.9.1 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 1/2] ARM: dts: NSP: Device Tree clean-ups @ 2015-11-17 19:55 ` Jon Mason 0 siblings, 0 replies; 12+ messages in thread From: Jon Mason @ 2015-11-17 19:55 UTC (permalink / raw) To: Florian Fainelli, Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Russell King Cc: devicetree, linux-arm-kernel, linux-kernel, bcm-kernel-feedback-list Minor changes to the Broadcom Northstar Plus device tree to make it more organized and clean. Firstly, move the GIC and L2 cache entries to be sequential with respect to the memory addresses. Secondly, modify the address portion of the entry names to reflect the difference from the range modification. Signed-off-by: Jon Mason <jonmason@broadcom.com> --- arch/arm/boot/dts/bcm-nsp.dtsi | 50 +++++++++++++++++++++--------------------- 1 file changed, 25 insertions(+), 25 deletions(-) diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index 4bcdd28..7335a74 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -58,30 +58,14 @@ }; }; - L2: l2-cache { - compatible = "arm,pl310-cache"; - reg = <0x2000 0x1000>; - cache-unified; - cache-level = <2>; - }; - - gic: interrupt-controller@19021000 { - compatible = "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - #address-cells = <0>; - interrupt-controller; - reg = <0x1000 0x1000>, - <0x0100 0x100>; - }; - - timer@19020200 { + timer@0200 { compatible = "arm,cortex-a9-global-timer"; reg = <0x0200 0x100>; interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>; clocks = <&periph_clk>; }; - twd-timer@19020600 { + twd-timer@0600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x0600 0x20>; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | @@ -89,13 +73,29 @@ clocks = <&periph_clk>; }; - twd-watchdog@19020620 { + twd-watchdog@0620 { compatible = "arm,cortex-a9-twd-wdt"; reg = <0x0620 0x20>; interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; clocks = <&periph_clk>; }; + + gic: interrupt-controller@1000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x1000 0x1000>, + <0x0100 0x100>; + }; + + L2: l2-cache { + compatible = "arm,pl310-cache"; + reg = <0x2000 0x1000>; + cache-unified; + cache-level = <2>; + }; }; clocks { @@ -116,7 +116,7 @@ #address-cells = <1>; #size-cells = <1>; - uart0: serial@18000300 { + uart0: serial@0300 { compatible = "ns16550a"; reg = <0x0300 0x100>; interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; @@ -124,7 +124,7 @@ status = "disabled"; }; - uart1: serial@18000400 { + uart1: serial@0400 { compatible = "ns16550a"; reg = <0x0400 0x100>; interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; @@ -132,7 +132,7 @@ status = "disabled"; }; - pcie0: pcie@18012000 { + pcie0: pcie@12000 { compatible = "brcm,iproc-pcie"; reg = <0x12000 0x1000>; @@ -156,7 +156,7 @@ status = "disabled"; }; - pcie1: pcie@18013000 { + pcie1: pcie@13000 { compatible = "brcm,iproc-pcie"; reg = <0x13000 0x1000>; @@ -180,7 +180,7 @@ status = "disabled"; }; - pcie2: pcie@18014000 { + pcie2: pcie@14000 { compatible = "brcm,iproc-pcie"; reg = <0x14000 0x1000>; @@ -204,7 +204,7 @@ status = "disabled"; }; - nand: nand@18026000 { + nand: nand@26000 { compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; reg = <0x026000 0x600>, <0x11b408 0x600>, -- 1.9.1 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 2/2] ARM: dts: NSP: Add I2C support to the DT 2015-11-17 19:55 ` Jon Mason (?) @ 2015-11-17 19:55 ` Jon Mason -1 siblings, 0 replies; 12+ messages in thread From: Jon Mason @ 2015-11-17 19:55 UTC (permalink / raw) To: linux-arm-kernel Add I2C support to the Broadcom Northstar Plus Device Tree. Since no driver changes are needed to enable this hardware, only the device tree changes are required to make this functional. Signed-off-by: Jon Mason <jonmason@broadcom.com> --- arch/arm/boot/dts/bcm-nsp.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index 7335a74..b74438c 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -217,5 +217,14 @@ brcm,nand-has-wp; }; + + i2c0: i2c at 38000 { + compatible = "brcm,iproc-i2c"; + reg = <0x38000 0x50>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>; + clock-frequency = <100000>; + }; }; }; -- 1.9.1 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 2/2] ARM: dts: NSP: Add I2C support to the DT @ 2015-11-17 19:55 ` Jon Mason 0 siblings, 0 replies; 12+ messages in thread From: Jon Mason @ 2015-11-17 19:55 UTC (permalink / raw) To: Florian Fainelli, Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Russell King Cc: devicetree, linux-arm-kernel, linux-kernel, bcm-kernel-feedback-list Add I2C support to the Broadcom Northstar Plus Device Tree. Since no driver changes are needed to enable this hardware, only the device tree changes are required to make this functional. Signed-off-by: Jon Mason <jonmason@broadcom.com> --- arch/arm/boot/dts/bcm-nsp.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index 7335a74..b74438c 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -217,5 +217,14 @@ brcm,nand-has-wp; }; + + i2c0: i2c@38000 { + compatible = "brcm,iproc-i2c"; + reg = <0x38000 0x50>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>; + clock-frequency = <100000>; + }; }; }; -- 1.9.1 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 2/2] ARM: dts: NSP: Add I2C support to the DT @ 2015-11-17 19:55 ` Jon Mason 0 siblings, 0 replies; 12+ messages in thread From: Jon Mason @ 2015-11-17 19:55 UTC (permalink / raw) To: Florian Fainelli, Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Russell King Cc: devicetree, linux-arm-kernel, linux-kernel, bcm-kernel-feedback-list Add I2C support to the Broadcom Northstar Plus Device Tree. Since no driver changes are needed to enable this hardware, only the device tree changes are required to make this functional. Signed-off-by: Jon Mason <jonmason@broadcom.com> --- arch/arm/boot/dts/bcm-nsp.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index 7335a74..b74438c 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -217,5 +217,14 @@ brcm,nand-has-wp; }; + + i2c0: i2c@38000 { + compatible = "brcm,iproc-i2c"; + reg = <0x38000 0x50>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>; + clock-frequency = <100000>; + }; }; }; -- 1.9.1 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 0/2] ARM: dts: NSP: clean-ups and I2C support @ 2015-11-19 23:36 ` Florian Fainelli 0 siblings, 0 replies; 12+ messages in thread From: Florian Fainelli @ 2015-11-19 23:36 UTC (permalink / raw) To: linux-arm-kernel On 17/11/15 11:55, Jon Mason wrote: > > Minor changes to the Broadcom Northstar Plus device tree to make it more > organized and clean, and adding I2C support (device tree only change > needed for support). Series applied, thanks Jon! > > > Jon Mason (2): > ARM: dts: NSP: Device Tree clean-ups > ARM: dts: NSP: Add I2C support to the DT > > arch/arm/boot/dts/bcm-nsp.dtsi | 59 ++++++++++++++++++++++++------------------ > 1 file changed, 34 insertions(+), 25 deletions(-) > -- Florian ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 0/2] ARM: dts: NSP: clean-ups and I2C support @ 2015-11-19 23:36 ` Florian Fainelli 0 siblings, 0 replies; 12+ messages in thread From: Florian Fainelli @ 2015-11-19 23:36 UTC (permalink / raw) To: Jon Mason, Florian Fainelli, Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Russell King Cc: devicetree, linux-arm-kernel, linux-kernel, bcm-kernel-feedback-list On 17/11/15 11:55, Jon Mason wrote: > > Minor changes to the Broadcom Northstar Plus device tree to make it more > organized and clean, and adding I2C support (device tree only change > needed for support). Series applied, thanks Jon! > > > Jon Mason (2): > ARM: dts: NSP: Device Tree clean-ups > ARM: dts: NSP: Add I2C support to the DT > > arch/arm/boot/dts/bcm-nsp.dtsi | 59 ++++++++++++++++++++++++------------------ > 1 file changed, 34 insertions(+), 25 deletions(-) > -- Florian ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 0/2] ARM: dts: NSP: clean-ups and I2C support @ 2015-11-19 23:36 ` Florian Fainelli 0 siblings, 0 replies; 12+ messages in thread From: Florian Fainelli @ 2015-11-19 23:36 UTC (permalink / raw) To: Jon Mason, Florian Fainelli, Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Russell King Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-kernel-u79uwXL29TY76Z2rM5mHXA, bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w On 17/11/15 11:55, Jon Mason wrote: > > Minor changes to the Broadcom Northstar Plus device tree to make it more > organized and clean, and adding I2C support (device tree only change > needed for support). Series applied, thanks Jon! > > > Jon Mason (2): > ARM: dts: NSP: Device Tree clean-ups > ARM: dts: NSP: Add I2C support to the DT > > arch/arm/boot/dts/bcm-nsp.dtsi | 59 ++++++++++++++++++++++++------------------ > 1 file changed, 34 insertions(+), 25 deletions(-) > -- Florian -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2015-11-19 23:37 UTC | newest] Thread overview: 12+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2015-11-17 19:55 [PATCH 0/2] ARM: dts: NSP: clean-ups and I2C support Jon Mason 2015-11-17 19:55 ` Jon Mason 2015-11-17 19:55 ` Jon Mason 2015-11-17 19:55 ` [PATCH 1/2] ARM: dts: NSP: Device Tree clean-ups Jon Mason 2015-11-17 19:55 ` Jon Mason 2015-11-17 19:55 ` Jon Mason 2015-11-17 19:55 ` [PATCH 2/2] ARM: dts: NSP: Add I2C support to the DT Jon Mason 2015-11-17 19:55 ` Jon Mason 2015-11-17 19:55 ` Jon Mason 2015-11-19 23:36 ` [PATCH 0/2] ARM: dts: NSP: clean-ups and I2C support Florian Fainelli 2015-11-19 23:36 ` Florian Fainelli 2015-11-19 23:36 ` Florian Fainelli
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.