From: Alim Akhtar <alim.akhtar@samsung.com>
To: Lee Jones <lee.jones@linaro.org>, Alim Akhtar <alim.akhtar@gmail.com>
Cc: broonie@kernel.org,
"Krzysztof Kozłowski" <k.kozlowski@samsung.com>,
"linux-samsung-soc@vger.kernel.org"
<linux-samsung-soc@vger.kernel.org>,
rtc-linux@googlegroups.com,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: [rtc-linux] Re: [PATCH v5 0/4] mfd: sec: add S2MPS15 PMIC support
Date: Fri, 20 Nov 2015 14:45:45 +0530 [thread overview]
Message-ID: <564EE4C1.3020907@samsung.com> (raw)
In-Reply-To: <20151120090528.GC3098@x1>
Hi Lee,
On 11/20/2015 02:35 PM, Lee Jones wrote:
> On Thu, 19 Nov 2015, Alim Akhtar wrote:
>
>> Hi Lee,
>> Do I need to resend this series? This series still apply cleanly on
>> top of v4.4-rc1.
>> I can see 1/4 is already applied.
>
> Yes, rebase and resend please.
>
Ok will resend, but I will drop patch #1/4 as this is already applied.
>> On Fri, Oct 30, 2015 at 11:55 AM, Alim Akhtar <alim.akhtar@samsung.com> wrote:
>>> Samsung's S2MPS15 PMIC is targetted to be used with Samsung's Exynos7 SoC.
>>> The S2MPS15 PMIC is similar in functionality to S2MPS11/14 PMIC. It contains
>>> 27 LDO and 10 Buck regulators, RTC, three 32.768 KHz clock outputs and allows
>>> programming these blocks via a I2C interface. This patch series adds initial
>>> support for LDO/Buck regulators of S2MPS15 PMIC.
>>>
>>> Changes since v4:
>>> * Dorpped Krzysztof reviewed-by and Lee Acked-by tags from patch 1/4,
>>> because of the new changes to DT bindings. Seeking a fresh review/ack tags.
>>> * Removed samsung,s2mps15-clk compatible as we can reuse exsisting compatible of s2mps13.
>>> * Added acked-by on patch 2/4
>>> * Modified rtc driver as s2mps15 differs from s2mps14/13 etc, addressed Krzysztof
>>> concerns on rtc patch.
>>> There are some other improvement suggestion from Krzystof for the rtc, I feel that can be done
>>> as a sperate patch later.
>>>
>>> Changes since v3:
>>> * Changes regulator driver name from s2mps15-pmic -> s2mps15-regulator as disscussed here [2]
>>> * Re-use the exsisting compatible/names for s2mps15 clock block.
>>>
>>> Changes since v2:
>>> * Addressed Lee Jones review comments.
>>>
>>> Changes since v1:
>>> * Added suggestion from Krzysztof [1].
>>> * Added s2mps15's 32.768 clocks support.
>>> * Added s2mps15's rtc support.
>>>
>>> V1 of these patches (with a lesser features) were posted a year back,
>>> since then there is not much progress on this, this is my attempt to
>>> move things forward.
>>>
>>> [1]-> https://lkml.org/lkml/2014/10/14/67
>>> [2]-> https://lkml.org/lkml/2015/10/28/417
>>>
>>> This series is based on linux-next-20151022.
>>> This is tested on exynos7-espresso board.
>>>
>>> Alim Akhtar (1):
>>> drivers/rtc/rtc-s5m.c: add support for S2MPS15 RTC
>>>
>>> Thomas Abraham (3):
>>> dt-bindings: mfd: s2mps11: add documentation for s2mps15 PMIC
>>> mfd: sec: Add support for S2MPS15 PMIC
>>> regulator: s2mps11: add support for S2MPS15 regulators
>>>
>>> Documentation/devicetree/bindings/mfd/s2mps11.txt | 21 ++-
>>> drivers/mfd/sec-core.c | 31 ++++
>>> drivers/mfd/sec-irq.c | 8 ++
>>> drivers/regulator/Kconfig | 4 +-
>>> drivers/regulator/s2mps11.c | 135 +++++++++++++++++-
>>> drivers/rtc/rtc-s5m.c | 37 ++++-
>>> include/linux/mfd/samsung/core.h | 1 +
>>> include/linux/mfd/samsung/rtc.h | 2 +
>>> include/linux/mfd/samsung/s2mps15.h | 158 +++++++++++++++++++++
>>> 9 files changed, 383 insertions(+), 14 deletions(-)
>>> create mode 100644 include/linux/mfd/samsung/s2mps15.h
>>>
>>>
>>
>>
>>
>
--
--
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
---
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
WARNING: multiple messages have this Message-ID (diff)
From: Alim Akhtar <alim.akhtar@samsung.com>
To: Lee Jones <lee.jones@linaro.org>, Alim Akhtar <alim.akhtar@gmail.com>
Cc: broonie@kernel.org,
"Krzysztof Kozłowski" <k.kozlowski@samsung.com>,
"linux-samsung-soc@vger.kernel.org"
<linux-samsung-soc@vger.kernel.org>,
rtc-linux@googlegroups.com,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v5 0/4] mfd: sec: add S2MPS15 PMIC support
Date: Fri, 20 Nov 2015 14:45:45 +0530 [thread overview]
Message-ID: <564EE4C1.3020907@samsung.com> (raw)
In-Reply-To: <20151120090528.GC3098@x1>
Hi Lee,
On 11/20/2015 02:35 PM, Lee Jones wrote:
> On Thu, 19 Nov 2015, Alim Akhtar wrote:
>
>> Hi Lee,
>> Do I need to resend this series? This series still apply cleanly on
>> top of v4.4-rc1.
>> I can see 1/4 is already applied.
>
> Yes, rebase and resend please.
>
Ok will resend, but I will drop patch #1/4 as this is already applied.
>> On Fri, Oct 30, 2015 at 11:55 AM, Alim Akhtar <alim.akhtar@samsung.com> wrote:
>>> Samsung's S2MPS15 PMIC is targetted to be used with Samsung's Exynos7 SoC.
>>> The S2MPS15 PMIC is similar in functionality to S2MPS11/14 PMIC. It contains
>>> 27 LDO and 10 Buck regulators, RTC, three 32.768 KHz clock outputs and allows
>>> programming these blocks via a I2C interface. This patch series adds initial
>>> support for LDO/Buck regulators of S2MPS15 PMIC.
>>>
>>> Changes since v4:
>>> * Dorpped Krzysztof reviewed-by and Lee Acked-by tags from patch 1/4,
>>> because of the new changes to DT bindings. Seeking a fresh review/ack tags.
>>> * Removed samsung,s2mps15-clk compatible as we can reuse exsisting compatible of s2mps13.
>>> * Added acked-by on patch 2/4
>>> * Modified rtc driver as s2mps15 differs from s2mps14/13 etc, addressed Krzysztof
>>> concerns on rtc patch.
>>> There are some other improvement suggestion from Krzystof for the rtc, I feel that can be done
>>> as a sperate patch later.
>>>
>>> Changes since v3:
>>> * Changes regulator driver name from s2mps15-pmic -> s2mps15-regulator as disscussed here [2]
>>> * Re-use the exsisting compatible/names for s2mps15 clock block.
>>>
>>> Changes since v2:
>>> * Addressed Lee Jones review comments.
>>>
>>> Changes since v1:
>>> * Added suggestion from Krzysztof [1].
>>> * Added s2mps15's 32.768 clocks support.
>>> * Added s2mps15's rtc support.
>>>
>>> V1 of these patches (with a lesser features) were posted a year back,
>>> since then there is not much progress on this, this is my attempt to
>>> move things forward.
>>>
>>> [1]-> https://lkml.org/lkml/2014/10/14/67
>>> [2]-> https://lkml.org/lkml/2015/10/28/417
>>>
>>> This series is based on linux-next-20151022.
>>> This is tested on exynos7-espresso board.
>>>
>>> Alim Akhtar (1):
>>> drivers/rtc/rtc-s5m.c: add support for S2MPS15 RTC
>>>
>>> Thomas Abraham (3):
>>> dt-bindings: mfd: s2mps11: add documentation for s2mps15 PMIC
>>> mfd: sec: Add support for S2MPS15 PMIC
>>> regulator: s2mps11: add support for S2MPS15 regulators
>>>
>>> Documentation/devicetree/bindings/mfd/s2mps11.txt | 21 ++-
>>> drivers/mfd/sec-core.c | 31 ++++
>>> drivers/mfd/sec-irq.c | 8 ++
>>> drivers/regulator/Kconfig | 4 +-
>>> drivers/regulator/s2mps11.c | 135 +++++++++++++++++-
>>> drivers/rtc/rtc-s5m.c | 37 ++++-
>>> include/linux/mfd/samsung/core.h | 1 +
>>> include/linux/mfd/samsung/rtc.h | 2 +
>>> include/linux/mfd/samsung/s2mps15.h | 158 +++++++++++++++++++++
>>> 9 files changed, 383 insertions(+), 14 deletions(-)
>>> create mode 100644 include/linux/mfd/samsung/s2mps15.h
>>>
>>>
>>
>>
>>
>
next prev parent reply other threads:[~2015-11-20 9:14 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-30 6:25 [rtc-linux] [PATCH v5 0/4] mfd: sec: add S2MPS15 PMIC support Alim Akhtar
2015-10-30 6:25 ` Alim Akhtar
2015-10-30 6:25 ` [rtc-linux] [PATCH v5 1/4] dt-bindings: mfd: s2mps11: add documentation for s2mps15 PMIC Alim Akhtar
2015-10-30 6:25 ` Alim Akhtar
2015-10-30 7:42 ` [rtc-linux] " Krzysztof Kozlowski
2015-10-30 7:42 ` Krzysztof Kozlowski
2015-10-30 9:25 ` [rtc-linux] " Alim Akhtar
2015-10-30 9:25 ` Alim Akhtar
2015-10-30 17:24 ` [rtc-linux] " Lee Jones
2015-10-30 17:24 ` Lee Jones
2015-11-06 22:33 ` [rtc-linux] " Rob Herring
2015-11-06 22:33 ` Rob Herring
2015-11-06 22:33 ` Rob Herring
2015-11-07 1:11 ` [rtc-linux] " Alim Akhtar
2015-11-07 1:11 ` Alim Akhtar
2015-11-07 1:11 ` Alim Akhtar
2015-11-07 3:09 ` [rtc-linux] " Krzysztof Kozlowski
2015-11-07 3:09 ` Krzysztof Kozlowski
2015-11-09 5:54 ` Alim Akhtar
2015-11-09 5:54 ` Alim Akhtar
2015-11-09 6:40 ` Krzysztof Kozlowski
2015-11-09 6:40 ` Krzysztof Kozlowski
2015-10-30 6:25 ` [rtc-linux] [PATCH v5 2/4] mfd: sec: Add support for S2MPS15 PMIC Alim Akhtar
2015-10-30 6:25 ` Alim Akhtar
2015-10-30 6:25 ` [rtc-linux] [PATCH v5 3/4] regulator: s2mps11: add support for S2MPS15 regulators Alim Akhtar
2015-10-30 6:25 ` Alim Akhtar
2015-10-30 6:25 ` [rtc-linux] [PATCH v5 4/4] drivers/rtc/rtc-s5m.c: add support for S2MPS15 RTC Alim Akhtar
2015-10-30 6:25 ` Alim Akhtar
2015-10-30 8:38 ` [rtc-linux] " Krzysztof Kozlowski
2015-10-30 8:38 ` Krzysztof Kozlowski
2015-10-30 9:28 ` [rtc-linux] " Alim Akhtar
2015-10-30 9:28 ` Alim Akhtar
2015-10-30 17:23 ` [rtc-linux] " Lee Jones
2015-10-30 17:23 ` Lee Jones
2015-11-01 17:40 ` [rtc-linux] " Alexandre Belloni
2015-11-01 17:40 ` Alexandre Belloni
2015-11-01 23:46 ` [rtc-linux] " Krzysztof Kozlowski
2015-11-01 23:46 ` Krzysztof Kozlowski
2015-11-02 0:47 ` [rtc-linux] " Alexandre Belloni
2015-11-02 0:47 ` Alexandre Belloni
2015-11-02 9:03 ` [rtc-linux] " Lee Jones
2015-11-02 9:03 ` Lee Jones
2015-11-02 10:19 ` [rtc-linux] " Alexandre Belloni
2015-11-02 10:19 ` Alexandre Belloni
2015-11-02 10:58 ` [rtc-linux] " Lee Jones
2015-11-02 10:58 ` Lee Jones
2015-11-19 18:00 ` [rtc-linux] Re: [PATCH v5 0/4] mfd: sec: add S2MPS15 PMIC support Alim Akhtar
2015-11-19 18:00 ` Alim Akhtar
2015-11-20 9:05 ` [rtc-linux] " Lee Jones
2015-11-20 9:05 ` Lee Jones
2015-11-20 9:15 ` Alim Akhtar [this message]
2015-11-20 9:15 ` Alim Akhtar
2015-11-20 10:31 ` [rtc-linux] " Lee Jones
2015-11-20 10:31 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=564EE4C1.3020907@samsung.com \
--to=alim.akhtar@samsung.com \
--cc=alim.akhtar@gmail.com \
--cc=broonie@kernel.org \
--cc=k.kozlowski@samsung.com \
--cc=lee.jones@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=rtc-linux@googlegroups.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.