[PATCH v2] ARM: dts: imx7d: cl-som-imx7: add basic module support

[grinberg@compulab.co.il (Igor Grinberg)]

Hi Shawn,

On 12/21/15 08:36, Shawn Guo wrote:
> On Wed, Dec 16, 2015 at 04:01:08PM +0200, Igor Grinberg wrote:
>> Hi Shawn,
>>
>> On 12/14/15 04:43, Shawn Guo wrote:
>>> On Thu, Dec 10, 2015 at 04:01:37PM +0200, Igor Grinberg wrote:
>>>> From: Ilya Ledvich <ilya@compulab.co.il>
>>
>> [...]
>>
>>>> diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt
>>>> index 34c88b0..30b0ba1 100644
>>>> --- a/Documentation/devicetree/bindings/arm/fsl.txt
>>>> +++ b/Documentation/devicetree/bindings/arm/fsl.txt
>>>> @@ -53,6 +53,10 @@ i.MX6 Quad SABRE Automotive Board
>>>>  Required root node properties:
>>>>      - compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
>>>>  
>>>> +i.MX7D CL-SOM-iMX7 Board
>>>> +Required root node properties:
>>>> +    - compatible = "compulab,cl-som-imx7", "fsl,imx7d";
>>>> +
>>>
>>> This is not a board produced by FSL, so it should be documented in
>>> fsl.txt.
>>
>> You mean _should not_ be documented in fsl.txt, right?
> 
> Right.  Sorry.
> 
>> Ok, I have no problem with that, we've just used the same approach OMAP
>> takes - all the OMAP based boards are documented in the same file:
>> Documentation/devicetree/bindings/arm/omap/omap.txt
> 
> omap.txt is probably fine, as it's not ti.txt.

Have you considered creating a kind of imx.txt?

> 
>>
>> Do you think we should document it in:
>> Documentation/devicetree/bindings/arm/compulab-boards.txt
>> (this file should already exist in arm-soc/next/dt)?
> 
> Yeah, if the file already exist, it's the best option.  But, as it
> doesn't exist on my tree, I can not apply this change.

It is already in linux-next.
Who do you think should apply the v2 patch then?
May be the arm-soc guys? (Cc'ed Olof and Arnd)

> 
>>
>>>
>>>>  Generic i.MX boards
>>>>  -------------------
>>>>  
>>>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>>>> index 30bbc37..83ed521 100644
>>>> --- a/arch/arm/boot/dts/Makefile
>>>> +++ b/arch/arm/boot/dts/Makefile
>>>> @@ -350,6 +350,7 @@ dtb-$(CONFIG_SOC_IMX6SX) += \
>>>>  dtb-$(CONFIG_SOC_IMX6UL) += \
>>>>  	imx6ul-14x14-evk.dtb
>>>>  dtb-$(CONFIG_SOC_IMX7D) += \
>>>> +	imx7d-cl-som-imx7.dtb \
>>>>  	imx7d-sdb.dtb
>>>>  dtb-$(CONFIG_SOC_LS1021A) += \
>>>>  	ls1021a-qds.dtb \
>>>> diff --git a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
>>>> new file mode 100644
>>>> index 0000000..ba05198
>>>> --- /dev/null
>>>> +++ b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
>>>> @@ -0,0 +1,150 @@
>>>> +/*
>>>> + * Support for CompuLab CL-SOM-iMX7 System-on-Module
>>>> + *
>>>> + * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/
>>>> + * Author: Ilya Ledvich <ilya@compulab.co.il>
>>>> + *
>>>> + * This program is free software; you can redistribute it and/or modify it
>>>> + * under the terms of the GNU General Public License version 2 as published by
>>>> + * the Free Software Foundation.
>>>> + */
>>>
>>> GPL/X11 dual licence is generally suggested for newly added dts files,
>>> as it will let non-Linux OS use them.
>>
>> I don't remember we've used this one before...
>> Can you please point to an example?
> 
> The following command will give you a plenty of examples.
> 
> $ git grep X11 arch/arm/boot/dts

10x!


-- 
Regards,
Igor.