* BeagleBone...bitbake -v core-image-sato stops @ 2015-12-06 10:16 kaffeesurrogat 2015-12-06 14:57 ` Michael Habibi 0 siblings, 1 reply; 13+ messages in thread From: kaffeesurrogat @ 2015-12-06 10:16 UTC (permalink / raw) To: yocto [-- Attachment #1: Type: text/plain, Size: 775 bytes --] Hello to all, this is my first question ;-) I'm doing my first steps with a beaglebone black and yocto. I've bought the beaglebone book "Using Yocto Project with Beaglebone Black" and started the bitbake with "bitbake -v core-image-sato". After a while the bitbake-process reached a package called attr-native-2.4.47-r0 and it was not able to move on. Bitmaker did not complain about anything, but I've started the process yesterday in the morning and until now there was no progress. I've downloaded the source with: git clone -b daisy git://git.yoctoproject.org/poky.git My Distro is: gentoo I've started the bitbake with: bitbake -v core-image-sato Now I'm wondering, if I did something wrong ..... Greetings, kaffeesurrogat [-- Attachment #2: attr-native-2.4.47-r0.png --] [-- Type: image/png, Size: 578511 bytes --] ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: BeagleBone...bitbake -v core-image-sato stops 2015-12-06 10:16 BeagleBone...bitbake -v core-image-sato stops kaffeesurrogat @ 2015-12-06 14:57 ` Michael Habibi 2015-12-06 17:32 ` kaffeesurrogat 0 siblings, 1 reply; 13+ messages in thread From: Michael Habibi @ 2015-12-06 14:57 UTC (permalink / raw) To: kaffeesurrogat; +Cc: yocto [-- Attachment #1: Type: text/plain, Size: 1164 bytes --] You may be able to look under ${WORKDIR}/temp/log.do_compile to see what the logs are saying it got stuck doing. On Sun, Dec 6, 2015 at 4:16 AM, <kaffeesurrogat@posteo.de> wrote: > Hello to all, > > this is my first question ;-) I'm doing my first steps with a beaglebone > black and yocto. I've bought the beaglebone book "Using Yocto Project with > Beaglebone Black" and started the bitbake with "bitbake -v > core-image-sato". After a while the bitbake-process reached a package > called attr-native-2.4.47-r0 and it was not able to move on. Bitmaker did > not complain about anything, but I've started the process yesterday in the > morning and until now there was no progress. > > I've downloaded the source with: > > git clone -b daisy git://git.yoctoproject.org/poky.git > > My Distro is: > > gentoo > > I've started the bitbake with: > > bitbake -v core-image-sato > > > Now I'm wondering, if I did something wrong ..... > > Greetings, > > kaffeesurrogat > > > -- > _______________________________________________ > yocto mailing list > yocto@yoctoproject.org > https://lists.yoctoproject.org/listinfo/yocto > > [-- Attachment #2: Type: text/html, Size: 1773 bytes --] ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: BeagleBone...bitbake -v core-image-sato stops 2015-12-06 14:57 ` Michael Habibi @ 2015-12-06 17:32 ` kaffeesurrogat 2015-12-07 20:16 ` kaffeesurrogat 0 siblings, 1 reply; 13+ messages in thread From: kaffeesurrogat @ 2015-12-06 17:32 UTC (permalink / raw) To: yocto Thanks so far. I wasn't aware of the log files in temp/log.do_compile directory ;-) Well I've found an error, perhaps not related to attr-native but to gcc: the log-file says: + cd /home/nico/yocto_bb/poky/build_bbb/tmp/work/cortexa8hf-vfp-neon-poky-linux-gnueabi/gcc-cross-initial/4.8.2-r0/gcc-4.8.2/build.i686-linux.arm-poky-linux-gnueabi + do_compile + oe_runmake all-gcc all-target-libgcc + oe_runmake_call all-gcc all-target-libgcc + bbnote make -j 8 'ARCH_FLAGS_FOR_TARGET= -march=armv7-a -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a8 -isystem/home/nico/yocto_bb/poky/build_bbb/tmp/sysroots/beaglebone/usr/include' all-gcc all-target-libgcc + echo 'NOTE: make -j 8 ARCH_FLAGS_FOR_TARGET= -march=armv7-a -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a8 -isystem/home/nico/yocto_bb/poky/build_bbb/tmp/sysroots/beaglebone/usr/include all-gcc all-target-libgcc' NOTE: make -j 8 ARCH_FLAGS_FOR_TARGET= -march=armv7-a -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a8 -isystem/home/nico/yocto_bb/poky/build_bbb/tmp/sysroots/beaglebone/usr/include all-gcc all-target-libgcc + make -j 8 'ARCH_FLAGS_FOR_TARGET= -march=armv7-a -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a8 -isystem/home/nico/yocto_bb/poky/build_bbb/tmp/sysroots/beaglebone/usr/include' all-gcc all-target-libgcc make: *** No rule to make target 'all-gcc'. Stop. + die 'oe_runmake failed' + bbfatal 'oe_runmake failed' + echo 'ERROR: oe_runmake failed' ERROR: oe_runmake failed It might happen to be the problem, but I don't know ..... I will poke around, to find some information about setting up the gcc-toolchain. Could this be the problem ? Thanks, kaffeesurrogat Am 06.12.2015 um 15:57 schrieb Michael Habibi: > You may be able to look under ${WORKDIR}/temp/log.do_compile to see > what the logs are saying it got stuck doing. > > On Sun, Dec 6, 2015 at 4:16 AM, <kaffeesurrogat@posteo.de > <mailto:kaffeesurrogat@posteo.de>> wrote: > > Hello to all, > > this is my first question ;-) I'm doing my first steps with a > beaglebone black and yocto. I've bought the beaglebone book "Using > Yocto Project with Beaglebone Black" and started the bitbake with > "bitbake -v core-image-sato". After a while the bitbake-process > reached a package called attr-native-2.4.47-r0 and it was not able > to move on. Bitmaker did not complain about anything, but I've > started the process yesterday in the morning and until now there > was no progress. > > I've downloaded the source with: > > git clone -b daisy git://git.yoctoproject.org/poky.git > <http://git.yoctoproject.org/poky.git> > > My Distro is: > > gentoo > > I've started the bitbake with: > > bitbake -v core-image-sato > > > Now I'm wondering, if I did something wrong ..... > > Greetings, > > kaffeesurrogat > > > -- > _______________________________________________ > yocto mailing list > yocto@yoctoproject.org <mailto:yocto@yoctoproject.org> > https://lists.yoctoproject.org/listinfo/yocto > > ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: BeagleBone...bitbake -v core-image-sato stops 2015-12-06 17:32 ` kaffeesurrogat @ 2015-12-07 20:16 ` kaffeesurrogat 2015-12-28 8:58 ` kaffeesurrogat 0 siblings, 1 reply; 13+ messages in thread From: kaffeesurrogat @ 2015-12-07 20:16 UTC (permalink / raw) To: yocto Hello again, i've had a closer look to my gentoo system. Since it is an old but regularly updated system i am stuck with a non-multilib enabled profile. Luckily I have a newer installation on a different machine available and until now things compile fine. The new installation is using a multilib-enabled profile. For everything else I've followed the steps mentioned in the yocto wiki found on wiki.gentoo.org: https://wiki.gentoo.org/wiki/Yocto Have fun, kaffeesurrogat Am 06.12.2015 um 18:32 schrieb kaffeesurrogat@posteo.de: > Thanks so far. I wasn't aware of the log files in temp/log.do_compile > directory ;-) Well I've found an error, perhaps not related to > attr-native but to gcc: > > the log-file says: > > + cd > /home/nico/yocto_bb/poky/build_bbb/tmp/work/cortexa8hf-vfp-neon-poky-linux-gnueabi/gcc-cross-initial/4.8.2-r0/gcc-4.8.2/build.i686-linux.arm-poky-linux-gnueabi > + do_compile > + oe_runmake all-gcc all-target-libgcc > + oe_runmake_call all-gcc all-target-libgcc > + bbnote make -j 8 'ARCH_FLAGS_FOR_TARGET= -march=armv7-a > -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a8 > -isystem/home/nico/yocto_bb/poky/build_bbb/tmp/sysroots/beaglebone/usr/include' > all-gcc all-target-libgcc > + echo 'NOTE: make -j 8 ARCH_FLAGS_FOR_TARGET= -march=armv7-a > -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a8 > -isystem/home/nico/yocto_bb/poky/build_bbb/tmp/sysroots/beaglebone/usr/include > all-gcc all-target-libgcc' > NOTE: make -j 8 ARCH_FLAGS_FOR_TARGET= -march=armv7-a > -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a8 > -isystem/home/nico/yocto_bb/poky/build_bbb/tmp/sysroots/beaglebone/usr/include > all-gcc all-target-libgcc > + make -j 8 'ARCH_FLAGS_FOR_TARGET= -march=armv7-a -mthumb-interwork > -mfloat-abi=hard -mfpu=neon -mtune=cortex-a8 > -isystem/home/nico/yocto_bb/poky/build_bbb/tmp/sysroots/beaglebone/usr/include' > all-gcc all-target-libgcc > make: *** No rule to make target 'all-gcc'. Stop. > + die 'oe_runmake failed' > + bbfatal 'oe_runmake failed' > + echo 'ERROR: oe_runmake failed' > ERROR: oe_runmake failed > > > It might happen to be the problem, but I don't know ..... I will poke > around, to find some information about setting up the gcc-toolchain. > Could this be the problem ? > > > Thanks, > > kaffeesurrogat > > Am 06.12.2015 um 15:57 schrieb Michael Habibi: >> You may be able to look under ${WORKDIR}/temp/log.do_compile to see >> what the logs are saying it got stuck doing. >> >> On Sun, Dec 6, 2015 at 4:16 AM, <kaffeesurrogat@posteo.de >> <mailto:kaffeesurrogat@posteo.de>> wrote: >> >> Hello to all, >> >> this is my first question ;-) I'm doing my first steps with a >> beaglebone black and yocto. I've bought the beaglebone book "Using >> Yocto Project with Beaglebone Black" and started the bitbake with >> "bitbake -v core-image-sato". After a while the bitbake-process >> reached a package called attr-native-2.4.47-r0 and it was not able >> to move on. Bitmaker did not complain about anything, but I've >> started the process yesterday in the morning and until now there >> was no progress. >> >> I've downloaded the source with: >> >> git clone -b daisy git://git.yoctoproject.org/poky.git >> <http://git.yoctoproject.org/poky.git> >> >> My Distro is: >> >> gentoo >> >> I've started the bitbake with: >> >> bitbake -v core-image-sato >> >> >> Now I'm wondering, if I did something wrong ..... >> >> Greetings, >> >> kaffeesurrogat >> >> >> -- >> _______________________________________________ >> yocto mailing list >> yocto@yoctoproject.org <mailto:yocto@yoctoproject.org> >> https://lists.yoctoproject.org/listinfo/yocto >> >> > ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: BeagleBone...bitbake -v core-image-sato stops 2015-12-07 20:16 ` kaffeesurrogat @ 2015-12-28 8:58 ` kaffeesurrogat 2015-12-28 9:09 ` Nico Mock 2015-12-28 9:58 ` kaffeesurrogat 0 siblings, 2 replies; 13+ messages in thread From: kaffeesurrogat @ 2015-12-28 8:58 UTC (permalink / raw) To: yocto Sorry guys ..... I thought I was done. Actually I'm not a bit smarter then before ;-) I'm still trying to build a yocto-image for a beaglebone. I believed, that the reason why yocto stopped compiling at attr-native-2.4.47-r0 was the missing gcc-multilib support. I've tried the same build on a gentoo machine at work, which had a multilib environment, and it finished. I've setup a new gentoo with multilib environment on my laptop but ...... bitbake stops again at attr-native. So this was not the trick. The log.do_compile in /home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/x86_64-linux/attr-native/2.4.47-r0/temp says nothing special, at least for me. Here is the quote: ----------------------------------------------------------------------------------------------------- x86_64-linux-libtool: link: gcc -o .libs/setfattr -Wl,-rpath-link -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib -Wl,-rpath-link -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/lib -Wl,-rpath -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib -Wl,-rpath -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/lib -Wl,-O1 -Wl,-rpath-link -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib -Wl,-rpath-link -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/lib -Wl,-rpath -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib -Wl,-rpath -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/lib -Wl,-O1 -Wl,-rpath-link -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib -Wl,-rpath-link -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/lib -Wl,-rpath -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib -Wl,-rpath -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysrootgmake[2]: Leaving directory '/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/x86_64-linux/attr-native/2.4.47-r0/attr-2.4.47/setfattr' o fr.mo fr.po ------------------------------------------------------------------------------------------------------- It will stay at this point forever. The last output messages of bitbake: -------------------------------------------------------------------------------------------------------- + rm -rf /home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/beaglebone-poky-linux-gnueabi/linux-yocto/3.14.4+gitAUTOINC+183622e809_0143c6ebb4-r0/sstate-build-populate_lic/ + ret=0 + trap '' 0 + exit 0 [INFO] Pre-processed cfg file beaglebone-standard-config-3.14.4 created. [INFO] processing of raw cfg data completed. ******************************************************************************** Configuration stored in /home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/beaglebone-poky-linux-gnueabi/linux-yocto/3.14.4+gitAUTOINC+183622e809_0143c6ebb4-r0/linux-beaglebone-standard-build/.config ******************************************************************************** To build with this kernel configuration, ensure a suitable toolchain is in your path for arm, note its common command prefix, and do: make O=/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/beaglebone-poky-linux-gnueabi/linux-yocto/3.14.4+gitAUTOINC+183622e809_0143c6ebb4-r0/linux-beaglebone-standard-build ARCH=arm \ CROSS_COMPILE=<cross-compile-prefix> + '[' 0 -ne 0 ']' + echo '# Global settings from linux recipe' + echo 'CONFIG_LOCALVERSION="-yocto-standard"' + ret=0 + trap '' 0 + exit 0 Currently 1 running tasks (1040 of 1770): 0: attr-native-2.4.47-r0 do_compile (pid 1778) ------------------------------------------------------------------------------------------------- To be honest, I'm lost .... Would be happy about some help, kaffeesurrogat On 07.12.2015 21:16, kaffeesurrogat@posteo.de wrote: > cd > /home/nico/yocto_bb/poky/build_bbb/tmp/work/cortexa8hf-vfp-neon-poky-linux-gnueabi/gcc-cross-initial/4.8.2-r0/gcc-4.8.2/build.i686-linux.arm-poky-linux-gnueabi ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: BeagleBone...bitbake -v core-image-sato stops 2015-12-28 8:58 ` kaffeesurrogat @ 2015-12-28 9:09 ` Nico Mock 2015-12-28 9:31 ` kaffeesurrogat 2015-12-28 9:58 ` kaffeesurrogat 1 sibling, 1 reply; 13+ messages in thread From: Nico Mock @ 2015-12-28 9:09 UTC (permalink / raw) To: yocto On 28.12.2015 09:58, kaffeesurrogat@posteo.de wrote: > Sorry guys ..... > > I thought I was done. Actually I'm not a bit smarter then before ;-) > > I'm still trying to build a yocto-image for a beaglebone. I believed, > that the reason why yocto stopped compiling at attr-native-2.4.47-r0 > was the missing gcc-multilib support. I've tried the same build on a > gentoo machine at work, which had a multilib environment, and it > finished. > > I've setup a new gentoo with multilib environment on my laptop but > ...... bitbake stops again at attr-native. So this was not the trick. > The log.do_compile in > > /home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/x86_64-linux/attr-native/2.4.47-r0/temp > > > says nothing special, at least for me. Here is the quote: > > ----------------------------------------------------------------------------------------------------- > > > x86_64-linux-libtool: link: gcc -o .libs/setfattr -Wl,-rpath-link > -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib > -Wl,-rpath-link > -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/lib > -Wl,-rpath > -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib > -Wl,-rpath > -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/lib > -Wl,-O1 -Wl,-rpath-link > -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib > -Wl,-rpath-link > -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/lib > -Wl,-rpath > -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib > -Wl,-rpath > -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/lib > -Wl,-O1 -Wl,-rpath-link > -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib > -Wl,-rpath-link > -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/lib > -Wl,-rpath > -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib > -Wl,-rpath > -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysrootgmake[2]: > Leaving directory > '/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/x86_64-linux/attr-native/2.4.47-r0/attr-2.4.47/setfattr' > > o fr.mo fr.po > > ------------------------------------------------------------------------------------------------------- > > ADD-ON: I've had a look in the log.do-compile-file on my machine at work. It says ..... ----------------------------------------------------------------------------------------------------------- o fr.mo fr.po gmake[3]: Nothing to be done for 'default'. gmake[3]: Leaving directory '/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/x86_64-linux/attr-native/2.4.47-r0/attr-2.4.47/man/man1' /usr/bin/gmake -C man2 gmake[2]: o: Command not found ../include/buildrules:66: recipe for target 'fr.mo' failed gmake[2]: [fr.mo] Error 127 (ignored) ----------------------------------------------------------------------------------------------------------- Well ..... ???????????????? > It will stay at this point forever. > > > The last output messages of bitbake: > > > -------------------------------------------------------------------------------------------------------- > > > + rm -rf > /home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/beaglebone-poky-linux-gnueabi/linux-yocto/3.14.4+gitAUTOINC+183622e809_0143c6ebb4-r0/sstate-build-populate_lic/ > > + ret=0 > + trap '' 0 > + exit 0 > > [INFO] Pre-processed cfg file beaglebone-standard-config-3.14.4 created. > [INFO] processing of raw cfg data completed. > > > ******************************************************************************** > > Configuration stored in > /home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/beaglebone-poky-linux-gnueabi/linux-yocto/3.14.4+gitAUTOINC+183622e809_0143c6ebb4-r0/linux-beaglebone-standard-build/.config > ******************************************************************************** > > > To build with this kernel configuration, ensure a suitable toolchain > is in your path for arm, note its common command prefix, and do: > > make > O=/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/beaglebone-poky-linux-gnueabi/linux-yocto/3.14.4+gitAUTOINC+183622e809_0143c6ebb4-r0/linux-beaglebone-standard-build > ARCH=arm \ > CROSS_COMPILE=<cross-compile-prefix> > > > + '[' 0 -ne 0 ']' > > + echo '# Global settings from linux recipe' > + echo 'CONFIG_LOCALVERSION="-yocto-standard"' > + ret=0 > + trap '' 0 > + exit 0 > > Currently 1 running tasks (1040 of 1770): > 0: attr-native-2.4.47-r0 do_compile (pid 1778) > > ------------------------------------------------------------------------------------------------- > > > To be honest, I'm lost .... > > Would be happy about some help, > > kaffeesurrogat > > > On 07.12.2015 21:16, kaffeesurrogat@posteo.de wrote: >> cd >> /home/nico/yocto_bb/poky/build_bbb/tmp/work/cortexa8hf-vfp-neon-poky-linux-gnueabi/gcc-cross-initial/4.8.2-r0/gcc-4.8.2/build.i686-linux.arm-poky-linux-gnueabi > ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: BeagleBone...bitbake -v core-image-sato stops 2015-12-28 9:09 ` Nico Mock @ 2015-12-28 9:31 ` kaffeesurrogat 0 siblings, 0 replies; 13+ messages in thread From: kaffeesurrogat @ 2015-12-28 9:31 UTC (permalink / raw) To: yocto -------- Forwarded Message -------- Subject: Re: [yocto] BeagleBone...bitbake -v core-image-sato stops Date: Mon, 28 Dec 2015 10:09:09 +0100 From: Nico Mock <nico.mock@posteo.de> To: yocto@yoctoproject.org On 28.12.2015 09:58, kaffeesurrogat@posteo.de wrote: > Sorry guys ..... > > I thought I was done. Actually I'm not a bit smarter then before ;-) > > I'm still trying to build a yocto-image for a beaglebone. I believed, > that the reason why yocto stopped compiling at attr-native-2.4.47-r0 > was the missing gcc-multilib support. I've tried the same build on a > gentoo machine at work, which had a multilib environment, and it > finished. > > I've setup a new gentoo with multilib environment on my laptop but > ...... bitbake stops again at attr-native. So this was not the trick. > The log.do_compile in > > /home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/x86_64-linux/attr-native/2.4.47-r0/temp > > > says nothing special, at least for me. Here is the quote: > > ----------------------------------------------------------------------------------------------------- > > > x86_64-linux-libtool: link: gcc -o .libs/setfattr -Wl,-rpath-link > -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib > -Wl,-rpath-link > -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/lib > -Wl,-rpath > -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib > -Wl,-rpath > -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/lib > -Wl,-O1 -Wl,-rpath-link > -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib > -Wl,-rpath-link > -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/lib > -Wl,-rpath > -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib > -Wl,-rpath > -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/lib > -Wl,-O1 -Wl,-rpath-link > -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib > -Wl,-rpath-link > -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/lib > -Wl,-rpath > -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib > -Wl,-rpath > -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysrootgmake[2]: > Leaving directory > '/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/x86_64-linux/attr-native/2.4.47-r0/attr-2.4.47/setfattr' > > o fr.mo fr.po > > ------------------------------------------------------------------------------------------------------- > > ADD-ON: I've had a look in the log.do-compile-file on my machine at work. It says ..... ----------------------------------------------------------------------------------------------------------- o fr.mo fr.po gmake[3]: Nothing to be done for 'default'. gmake[3]: Leaving directory '/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/x86_64-linux/attr-native/2.4.47-r0/attr-2.4.47/man/man1' /usr/bin/gmake -C man2 gmake[2]: o: Command not found ../include/buildrules:66: recipe for target 'fr.mo' failed gmake[2]: [fr.mo] Error 127 (ignored) ----------------------------------------------------------------------------------------------------------- Well ..... ???????????????? > It will stay at this point forever. > > > The last output messages of bitbake: > > > -------------------------------------------------------------------------------------------------------- > > > + rm -rf > /home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/beaglebone-poky-linux-gnueabi/linux-yocto/3.14.4+gitAUTOINC+183622e809_0143c6ebb4-r0/sstate-build-populate_lic/ > > + ret=0 > + trap '' 0 > + exit 0 > > [INFO] Pre-processed cfg file beaglebone-standard-config-3.14.4 created. > [INFO] processing of raw cfg data completed. > > > ******************************************************************************** > > Configuration stored in > /home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/beaglebone-poky-linux-gnueabi/linux-yocto/3.14.4+gitAUTOINC+183622e809_0143c6ebb4-r0/linux-beaglebone-standard-build/.config > ******************************************************************************** > > > To build with this kernel configuration, ensure a suitable toolchain > is in your path for arm, note its common command prefix, and do: > > make > O=/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/beaglebone-poky-linux-gnueabi/linux-yocto/3.14.4+gitAUTOINC+183622e809_0143c6ebb4-r0/linux-beaglebone-standard-build > ARCH=arm \ > CROSS_COMPILE=<cross-compile-prefix> > > > + '[' 0 -ne 0 ']' > > + echo '# Global settings from linux recipe' > + echo 'CONFIG_LOCALVERSION="-yocto-standard"' > + ret=0 > + trap '' 0 > + exit 0 > > Currently 1 running tasks (1040 of 1770): > 0: attr-native-2.4.47-r0 do_compile (pid 1778) > > ------------------------------------------------------------------------------------------------- > > > To be honest, I'm lost .... > > Would be happy about some help, > > kaffeesurrogat > > > On 07.12.2015 21:16, kaffeesurrogat@posteo.de wrote: >> cd >> /home/nico/yocto_bb/poky/build_bbb/tmp/work/cortexa8hf-vfp-neon-poky-linux-gnueabi/gcc-cross-initial/4.8.2-r0/gcc-4.8.2/build.i686-linux.arm-poky-linux-gnueabi > ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: BeagleBone...bitbake -v core-image-sato stops 2015-12-28 8:58 ` kaffeesurrogat 2015-12-28 9:09 ` Nico Mock @ 2015-12-28 9:58 ` kaffeesurrogat 2015-12-28 16:56 ` kaffeesurrogat 1 sibling, 1 reply; 13+ messages in thread From: kaffeesurrogat @ 2015-12-28 9:58 UTC (permalink / raw) To: yocto Sorry for sending the same mail twice. I've mixed up my identities. On 28.12.2015 09:58, kaffeesurrogat@posteo.de wrote: > Sorry guys ..... > > I thought I was done. Actually I'm not a bit smarter then before ;-) > > I'm still trying to build a yocto-image for a beaglebone. I believed, > that the reason why yocto stopped compiling at attr-native-2.4.47-r0 > was the missing gcc-multilib support. I've tried the same build on a > gentoo machine at work, which had a multilib environment, and it > finished. > > I've setup a new gentoo with multilib environment on my laptop but > ...... bitbake stops again at attr-native. So this was not the trick. > The log.do_compile in > > /home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/x86_64-linux/attr-native/2.4.47-r0/temp > > > says nothing special, at least for me. Here is the quote: > > ----------------------------------------------------------------------------------------------------- > > > x86_64-linux-libtool: link: gcc -o .libs/setfattr -Wl,-rpath-link > -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib > -Wl,-rpath-link > -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/lib > -Wl,-rpath > -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib > -Wl,-rpath > -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/lib > -Wl,-O1 -Wl,-rpath-link > -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib > -Wl,-rpath-link > -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/lib > -Wl,-rpath > -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib > -Wl,-rpath > -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/lib > -Wl,-O1 -Wl,-rpath-link > -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib > -Wl,-rpath-link > -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/lib > -Wl,-rpath > -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib > -Wl,-rpath > -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysrootgmake[2]: > Leaving directory > '/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/x86_64-linux/attr-native/2.4.47-r0/attr-2.4.47/setfattr' > > o fr.mo fr.po > > ------------------------------------------------------------------------------------------------------- > ADD-ON: I've had a look in the log.do-compile-file on my machine at work. It says ..... ----------------------------------------------------------------------------------------------------------- o fr.mo fr.po gmake[3]: Nothing to be done for 'default'. gmake[3]: Leaving directory '/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/x86_64-linux/attr-native/2.4.47-r0/attr-2.4.47/man/man1' /usr/bin/gmake -C man2 gmake[2]: o: Command not found ../include/buildrules:66: recipe for target 'fr.mo' failed gmake[2]: [fr.mo] Error 127 (ignored) ----------------------------------------------------------------------------------------------------------- Well ..... ???????????????? > > It will stay at this point forever. > > > The last output messages of bitbake: > > > -------------------------------------------------------------------------------------------------------- > > > + rm -rf > /home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/beaglebone-poky-linux-gnueabi/linux-yocto/3.14.4+gitAUTOINC+183622e809_0143c6ebb4-r0/sstate-build-populate_lic/ > > + ret=0 > + trap '' 0 > + exit 0 > > [INFO] Pre-processed cfg file beaglebone-standard-config-3.14.4 created. > [INFO] processing of raw cfg data completed. > > > ******************************************************************************** > > Configuration stored in > /home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/beaglebone-poky-linux-gnueabi/linux-yocto/3.14.4+gitAUTOINC+183622e809_0143c6ebb4-r0/linux-beaglebone-standard-build/.config > ******************************************************************************** > > > To build with this kernel configuration, ensure a suitable toolchain > is in your path for arm, note its common command prefix, and do: > > make > O=/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/beaglebone-poky-linux-gnueabi/linux-yocto/3.14.4+gitAUTOINC+183622e809_0143c6ebb4-r0/linux-beaglebone-standard-build > ARCH=arm \ > CROSS_COMPILE=<cross-compile-prefix> > > > + '[' 0 -ne 0 ']' > > + echo '# Global settings from linux recipe' > + echo 'CONFIG_LOCALVERSION="-yocto-standard"' > + ret=0 > + trap '' 0 > + exit 0 > > Currently 1 running tasks (1040 of 1770): > 0: attr-native-2.4.47-r0 do_compile (pid 1778) > > ------------------------------------------------------------------------------------------------- > > > To be honest, I'm lost .... > > Would be happy about some help, > > kaffeesurrogat > > > On 07.12.2015 21:16, kaffeesurrogat@posteo.de wrote: >> cd >> /home/nico/yocto_bb/poky/build_bbb/tmp/work/cortexa8hf-vfp-neon-poky-linux-gnueabi/gcc-cross-initial/4.8.2-r0/gcc-4.8.2/build.i686-linux.arm-poky-linux-gnueabi > ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: BeagleBone...bitbake -v core-image-sato stops 2015-12-28 9:58 ` kaffeesurrogat @ 2015-12-28 16:56 ` kaffeesurrogat 2015-12-28 22:00 ` Khem Raj 0 siblings, 1 reply; 13+ messages in thread From: kaffeesurrogat @ 2015-12-28 16:56 UTC (permalink / raw) To: yocto Hello again, well I'm really a noob and guessing what to do. Well I've interrupted bitbake cause nothing was happing and the log.do_compile of attr-native didn't show any error message. I've started it all over again an now I do get an error message: yes ;-) it says: gmake[2]: ../-libtool: Command not found This looks a little bit weird to me, especially the "minus" in front of the "libtool" ..... Where does it come from? A missing or empty variable? Something like ${MYNAMEIS}-libtool an ${MYNAMEIS} not known? Greetings, Kaffeesurrogat On 28.12.2015 10:58, kaffeesurrogat wrote: > Sorry for sending the same mail twice. I've mixed up my identities. > > > On 28.12.2015 09:58, kaffeesurrogat@posteo.de wrote: >> Sorry guys ..... >> >> I thought I was done. Actually I'm not a bit smarter then before ;-) >> >> I'm still trying to build a yocto-image for a beaglebone. I believed, >> that the reason why yocto stopped compiling at attr-native-2.4.47-r0 >> was the missing gcc-multilib support. I've tried the same build on a >> gentoo machine at work, which had a multilib environment, and it >> finished. >> >> I've setup a new gentoo with multilib environment on my laptop but >> ...... bitbake stops again at attr-native. So this was not the trick. >> The log.do_compile in >> >> /home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/x86_64-linux/attr-native/2.4.47-r0/temp >> >> >> says nothing special, at least for me. Here is the quote: >> >> ----------------------------------------------------------------------------------------------------- >> >> >> x86_64-linux-libtool: link: gcc -o .libs/setfattr -Wl,-rpath-link >> -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib >> -Wl,-rpath-link >> -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/lib >> -Wl,-rpath >> -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib >> -Wl,-rpath >> -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/lib >> -Wl,-O1 -Wl,-rpath-link >> -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib >> -Wl,-rpath-link >> -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/lib >> -Wl,-rpath >> -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib >> -Wl,-rpath >> -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/lib >> -Wl,-O1 -Wl,-rpath-link >> -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib >> -Wl,-rpath-link >> -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/lib >> -Wl,-rpath >> -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib >> -Wl,-rpath >> -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysrootgmake[2]: >> Leaving directory >> '/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/x86_64-linux/attr-native/2.4.47-r0/attr-2.4.47/setfattr' >> >> o fr.mo fr.po >> >> ------------------------------------------------------------------------------------------------------- >> > > > ADD-ON: > > I've had a look in the log.do-compile-file on my machine at work. It > says ..... > > ----------------------------------------------------------------------------------------------------------- > > > o fr.mo fr.po > gmake[3]: Nothing to be done for 'default'. > gmake[3]: Leaving directory > '/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/x86_64-linux/attr-native/2.4.47-r0/attr-2.4.47/man/man1' > > /usr/bin/gmake -C man2 > gmake[2]: o: Command not found > ../include/buildrules:66: recipe for target 'fr.mo' failed > gmake[2]: [fr.mo] Error 127 (ignored) > > ----------------------------------------------------------------------------------------------------------- > > > Well ..... ???????????????? > >> >> It will stay at this point forever. >> >> >> The last output messages of bitbake: >> >> >> -------------------------------------------------------------------------------------------------------- >> >> >> + rm -rf >> /home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/beaglebone-poky-linux-gnueabi/linux-yocto/3.14.4+gitAUTOINC+183622e809_0143c6ebb4-r0/sstate-build-populate_lic/ >> >> + ret=0 >> + trap '' 0 >> + exit 0 >> >> [INFO] Pre-processed cfg file beaglebone-standard-config-3.14.4 created. >> [INFO] processing of raw cfg data completed. >> >> >> ******************************************************************************** >> >> Configuration stored in >> /home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/beaglebone-poky-linux-gnueabi/linux-yocto/3.14.4+gitAUTOINC+183622e809_0143c6ebb4-r0/linux-beaglebone-standard-build/.config >> ******************************************************************************** >> >> >> To build with this kernel configuration, ensure a suitable toolchain >> is in your path for arm, note its common command prefix, and do: >> >> make >> O=/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/beaglebone-poky-linux-gnueabi/linux-yocto/3.14.4+gitAUTOINC+183622e809_0143c6ebb4-r0/linux-beaglebone-standard-build >> ARCH=arm \ >> CROSS_COMPILE=<cross-compile-prefix> >> >> >> + '[' 0 -ne 0 ']' >> >> + echo '# Global settings from linux recipe' >> + echo 'CONFIG_LOCALVERSION="-yocto-standard"' >> + ret=0 >> + trap '' 0 >> + exit 0 >> >> Currently 1 running tasks (1040 of 1770): >> 0: attr-native-2.4.47-r0 do_compile (pid 1778) >> >> ------------------------------------------------------------------------------------------------- >> >> >> To be honest, I'm lost .... >> >> Would be happy about some help, >> >> kaffeesurrogat >> >> >> On 07.12.2015 21:16, kaffeesurrogat@posteo.de wrote: >>> cd >>> /home/nico/yocto_bb/poky/build_bbb/tmp/work/cortexa8hf-vfp-neon-poky-linux-gnueabi/gcc-cross-initial/4.8.2-r0/gcc-4.8.2/build.i686-linux.arm-poky-linux-gnueabi >> > ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: BeagleBone...bitbake -v core-image-sato stops 2015-12-28 16:56 ` kaffeesurrogat @ 2015-12-28 22:00 ` Khem Raj 2015-12-29 10:21 ` kaffeesurrogat 0 siblings, 1 reply; 13+ messages in thread From: Khem Raj @ 2015-12-28 22:00 UTC (permalink / raw) To: kaffeesurrogat; +Cc: yocto [-- Attachment #1: Type: text/plain, Size: 6353 bytes --] > On Dec 28, 2015, at 8:56 AM, kaffeesurrogat <kaffeesurrogat@posteo.de> wrote: > > Hello again, > > well I'm really a noob and guessing what to do. Well I've interrupted bitbake cause > nothing was happing and the log.do_compile of attr-native didn't show any error message. I've started it all over again an now I do get an error message: yes ;-) > > it says: > > gmake[2]: ../-libtool: Command not found > > This looks a little bit weird to me, especially the "minus" in front of the "libtool" ..... > > Where does it come from? A missing or empty variable? Something like ${MYNAMEIS}-libtool an ${MYNAMEIS} not known? > what is your build host ?. I would suggest to setup a clean build system ( may be a VM ) and try it out on that > Greetings, > > Kaffeesurrogat > > > On 28.12.2015 10:58, kaffeesurrogat wrote: >> Sorry for sending the same mail twice. I've mixed up my identities. >> >> >> On 28.12.2015 09:58, kaffeesurrogat@posteo.de wrote: >>> Sorry guys ..... >>> >>> I thought I was done. Actually I'm not a bit smarter then before ;-) >>> >>> I'm still trying to build a yocto-image for a beaglebone. I believed, that the reason why yocto stopped compiling at attr-native-2.4.47-r0 was the missing gcc-multilib support. I've tried the same build on a gentoo machine at work, which had a multilib environment, and it finished. >>> >>> I've setup a new gentoo with multilib environment on my laptop but ...... bitbake stops again at attr-native. So this was not the trick. The log.do_compile in >>> >>> /home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/x86_64-linux/attr-native/2.4.47-r0/temp >>> >>> says nothing special, at least for me. Here is the quote: >>> >>> ----------------------------------------------------------------------------------------------------- >>> >>> x86_64-linux-libtool: link: gcc -o .libs/setfattr -Wl,-rpath-link -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib -Wl,-rpath-link -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/lib -Wl,-rpath -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib -Wl,-rpath -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/lib -Wl,-O1 -Wl,-rpath-link -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib -Wl,-rpath-link -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/lib -Wl,-rpath -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib -Wl,-rpath -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/lib -Wl,-O1 -Wl,-rpath-link -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib -Wl,-rpath-link -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/lib -Wl,-rpath -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib -Wl,-rpath -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysrootgmake[2]: Leaving directory '/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/x86_64-linux/attr-native/2.4.47-r0/attr-2.4.47/setfattr' >>> >>> o fr.mo fr.po >>> >>> ------------------------------------------------------------------------------------------------------- >> >> >> ADD-ON: >> >> I've had a look in the log.do-compile-file on my machine at work. It >> says ..... >> >> ----------------------------------------------------------------------------------------------------------- >> >> o fr.mo fr.po >> gmake[3]: Nothing to be done for 'default'. >> gmake[3]: Leaving directory >> '/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/x86_64-linux/attr-native/2.4.47-r0/attr-2.4.47/man/man1' >> /usr/bin/gmake -C man2 >> gmake[2]: o: Command not found >> ../include/buildrules:66: recipe for target 'fr.mo' failed >> gmake[2]: [fr.mo] Error 127 (ignored) >> >> ----------------------------------------------------------------------------------------------------------- >> >> Well ..... ???????????????? >> >>> >>> It will stay at this point forever. >>> >>> >>> The last output messages of bitbake: >>> >>> >>> -------------------------------------------------------------------------------------------------------- >>> >>> + rm -rf /home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/beaglebone-poky-linux-gnueabi/linux-yocto/3.14.4+gitAUTOINC+183622e809_0143c6ebb4-r0/sstate-build-populate_lic/ >>> >>> + ret=0 >>> + trap '' 0 >>> + exit 0 >>> >>> [INFO] Pre-processed cfg file beaglebone-standard-config-3.14.4 created. >>> [INFO] processing of raw cfg data completed. >>> >>> >>> ******************************************************************************** >>> Configuration stored in /home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/beaglebone-poky-linux-gnueabi/linux-yocto/3.14.4+gitAUTOINC+183622e809_0143c6ebb4-r0/linux-beaglebone-standard-build/.config >>> ******************************************************************************** >>> >>> To build with this kernel configuration, ensure a suitable toolchain >>> is in your path for arm, note its common command prefix, and do: >>> >>> make O=/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/beaglebone-poky-linux-gnueabi/linux-yocto/3.14.4+gitAUTOINC+183622e809_0143c6ebb4-r0/linux-beaglebone-standard-build ARCH=arm \ >>> CROSS_COMPILE=<cross-compile-prefix> >>> >>> >>> + '[' 0 -ne 0 ']' >>> >>> + echo '# Global settings from linux recipe' >>> + echo 'CONFIG_LOCALVERSION="-yocto-standard"' >>> + ret=0 >>> + trap '' 0 >>> + exit 0 >>> >>> Currently 1 running tasks (1040 of 1770): >>> 0: attr-native-2.4.47-r0 do_compile (pid 1778) >>> >>> ------------------------------------------------------------------------------------------------- >>> >>> To be honest, I'm lost .... >>> >>> Would be happy about some help, >>> >>> kaffeesurrogat >>> >>> >>> On 07.12.2015 21:16, kaffeesurrogat@posteo.de wrote: >>>> cd /home/nico/yocto_bb/poky/build_bbb/tmp/work/cortexa8hf-vfp-neon-poky-linux-gnueabi/gcc-cross-initial/4.8.2-r0/gcc-4.8.2/build.i686-linux.arm-poky-linux-gnueabi >>> >> > > -- > _______________________________________________ > yocto mailing list > yocto@yoctoproject.org > https://lists.yoctoproject.org/listinfo/yocto [-- Attachment #2: Message signed with OpenPGP using GPGMail --] [-- Type: application/pgp-signature, Size: 211 bytes --] ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: BeagleBone...bitbake -v core-image-sato stops 2015-12-28 22:00 ` Khem Raj @ 2015-12-29 10:21 ` kaffeesurrogat 2016-01-03 11:24 ` [SOLVED] " kaffeesurrogat 0 siblings, 1 reply; 13+ messages in thread From: kaffeesurrogat @ 2015-12-29 10:21 UTC (permalink / raw) To: Khem Raj; +Cc: yocto On 28.12.2015 23:00, Khem Raj wrote: >> On Dec 28, 2015, at 8:56 AM, kaffeesurrogat <kaffeesurrogat@posteo.de> wrote: >> >> Hello again, >> >> well I'm really a noob and guessing what to do. Well I've interrupted bitbake cause >> nothing was happing and the log.do_compile of attr-native didn't show any error message. I've started it all over again an now I do get an error message: yes ;-) >> >> it says: >> >> gmake[2]: ../-libtool: Command not found >> >> This looks a little bit weird to me, especially the "minus" in front of the "libtool" ..... >> >> Where does it come from? A missing or empty variable? Something like ${MYNAMEIS}-libtool an ${MYNAMEIS} not known? >> > what is your build host ?. > I would suggest to setup a clean build system ( may be a VM ) and try it out on that Thanks Khem Raj, my build host is a gentoo system. I know it is not officially supported, but I'm using it for ages. Thus I know my way around. At least a little bit. Would be nice not to switch. I've removed my yocto-dir several times and made a fresh git-clone. I've tried with the daisy and the jethro branch. I've tried to build core-image-minimal and core-image-sato for qemu and the beaglebone black. I did that on two different gentoo-machines, on one of them things compiled fine. In the beginning I've had the impression, the faults on the failing-gentoo system could be due to the missing multilib support. Thus I replaced it with a fresh and clean install supporting gcc-multilib stuff. The error stays - with small variation - more or less the same: attr-native does not finish its build-process. 1) It stops with the message similiar to "o pl.mo pl.poto" after gmake left the directory getfattr or setfattr or 2) It fails with "gmake[2]: o: Command not found" or 3) It fails with "gmake[2]: ../-libtool: Command not found " This is really weird. I'm not able to figure the small but important differences on my two different gentoo machines. Any help is really appreciated, Kaffesurrogat >>>> Sorry guys ..... >>>> >>>> I thought I was done. Actually I'm not a bit smarter then before ;-) >>>> >>>> I'm still trying to build a yocto-image for a beaglebone. I believed, that the reason why yocto stopped compiling at attr-native-2.4.47-r0 was the missing gcc-multilib support. I've tried the same build on a gentoo machine at work, which had a multilib environment, and it finished. >>>> >>>> I've setup a new gentoo with multilib environment on my laptop but ...... bitbake stops again at attr-native. So this was not the trick. The log.do_compile in >>>> >>>> /home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/x86_64-linux/attr-native/2.4.47-r0/temp >>>> >>>> says nothing special, at least for me. Here is the quote: >>>> >>>> ----------------------------------------------------------------------------------------------------- >>>> >>>> x86_64-linux-libtool: link: gcc -o .libs/setfattr -Wl,-rpath-link -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib -Wl,-rpath-link -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/lib -Wl,-rpath -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib -Wl,-rpath -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/lib -Wl,-O1 -Wl,-rpath-link -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib -Wl,-rpath-link -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/lib -Wl,-rpath -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib -Wl,-rpath -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/lib -Wl,-O1 -Wl,-rpath-link -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib -Wl,-rpath-link -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/lib -Wl,-rpath -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib -Wl,-rpath -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysrootgmake[2]: Leaving directory '/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/x86_64-linux/attr-native/2.4.47-r0/attr-2.4.47/setfattr' >>>> >>>> o fr.mo fr.po >>>> >>>> ------------------------------------------------------------------------------------------------------- >>> >>> ADD-ON: >>> >>> I've had a look in the log.do-compile-file on my machine at work. It >>> says ..... >>> >>> ----------------------------------------------------------------------------------------------------------- >>> >>> o fr.mo fr.po >>> gmake[3]: Nothing to be done for 'default'. >>> gmake[3]: Leaving directory >>> '/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/x86_64-linux/attr-native/2.4.47-r0/attr-2.4.47/man/man1' >>> /usr/bin/gmake -C man2 >>> gmake[2]: o: Command not found >>> ../include/buildrules:66: recipe for target 'fr.mo' failed >>> gmake[2]: [fr.mo] Error 127 (ignored) >>> >>> ----------------------------------------------------------------------------------------------------------- >>> >>> Well ..... ???????????????? >>> >>>> It will stay at this point forever. >>>> >>>> >>>> The last output messages of bitbake: >>>> >>>> >>>> -------------------------------------------------------------------------------------------------------- >>>> >>>> + rm -rf /home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/beaglebone-poky-linux-gnueabi/linux-yocto/3.14.4+gitAUTOINC+183622e809_0143c6ebb4-r0/sstate-build-populate_lic/ >>>> >>>> + ret=0 >>>> + trap '' 0 >>>> + exit 0 >>>> >>>> [INFO] Pre-processed cfg file beaglebone-standard-config-3.14.4 created. >>>> [INFO] processing of raw cfg data completed. >>>> >>>> >>>> ******************************************************************************** >>>> Configuration stored in /home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/beaglebone-poky-linux-gnueabi/linux-yocto/3.14.4+gitAUTOINC+183622e809_0143c6ebb4-r0/linux-beaglebone-standard-build/.config >>>> ******************************************************************************** >>>> >>>> To build with this kernel configuration, ensure a suitable toolchain >>>> is in your path for arm, note its common command prefix, and do: >>>> >>>> make O=/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/beaglebone-poky-linux-gnueabi/linux-yocto/3.14.4+gitAUTOINC+183622e809_0143c6ebb4-r0/linux-beaglebone-standard-build ARCH=arm \ >>>> CROSS_COMPILE=<cross-compile-prefix> >>>> >>>> >>>> + '[' 0 -ne 0 ']' >>>> >>>> + echo '# Global settings from linux recipe' >>>> + echo 'CONFIG_LOCALVERSION="-yocto-standard"' >>>> + ret=0 >>>> + trap '' 0 >>>> + exit 0 >>>> >>>> Currently 1 running tasks (1040 of 1770): >>>> 0: attr-native-2.4.47-r0 do_compile (pid 1778) >>>> >>>> ------------------------------------------------------------------------------------------------- >>>> >>>> To be honest, I'm lost .... >>>> >>>> Would be happy about some help, >>>> >>>> kaffeesurrogat >>>> >>>> >>>> On 07.12.2015 21:16, kaffeesurrogat@posteo.de wrote: >>>>> cd /home/nico/yocto_bb/poky/build_bbb/tmp/work/cortexa8hf-vfp-neon-poky-linux-gnueabi/gcc-cross-initial/4.8.2-r0/gcc-4.8.2/build.i686-linux.arm-poky-linux-gnueabi >> -- >> _______________________________________________ >> yocto mailing list >> yocto@yoctoproject.org >> https://lists.yoctoproject.org/listinfo/yocto ^ permalink raw reply [flat|nested] 13+ messages in thread
* [SOLVED] Re: BeagleBone...bitbake -v core-image-sato stops 2015-12-29 10:21 ` kaffeesurrogat @ 2016-01-03 11:24 ` kaffeesurrogat 2016-01-03 16:27 ` Khem Raj 0 siblings, 1 reply; 13+ messages in thread From: kaffeesurrogat @ 2016-01-03 11:24 UTC (permalink / raw) To: yocto Hello to all and a happy new year, the do_compile of attr-native is finishing now on a gentoo host. I've copied the source of attr-native over to my gentoo host and run the ./configure, make .... process. I've compared the config.log - files of yocto and gentoo. The difference was " enable_gettext='yes' " on the gentoo host and " enable_gettext='no' " in the yocto-build-environment. Disabling gettext on the gentoo host led to the same behaviour. The compilation or linking stopped wiht the message "o fr.mo fr.po". I've changed the variable EXTRA_OECONF.... to: EXTRA_OECONF_append_class-native = " --enable-gettext=yes" in the file "ea-acl.inc" of the yocto-project, which resides in "meta/recipes-support/attr/". The build finished. As Khem Raj told me, I've used a virtualmachine with ubuntu to build the yocto-project. On ubuntu there was no need to enable gettext via ea-acl.inc. The build finished without any extra measures. Have fun, kaffessurrogat On 29.12.2015 11:21, kaffeesurrogat wrote: > > On 28.12.2015 23:00, Khem Raj wrote: >>> On Dec 28, 2015, at 8:56 AM, kaffeesurrogat >>> <kaffeesurrogat@posteo.de> wrote: >>> >>> Hello again, >>> >>> well I'm really a noob and guessing what to do. Well I've >>> interrupted bitbake cause >>> nothing was happing and the log.do_compile of attr-native didn't >>> show any error message. I've started it all over again an now I do >>> get an error message: yes ;-) >>> >>> it says: >>> >>> gmake[2]: ../-libtool: Command not found >>> >>> This looks a little bit weird to me, especially the "minus" in front >>> of the "libtool" ..... >>> >>> Where does it come from? A missing or empty variable? Something like >>> ${MYNAMEIS}-libtool an ${MYNAMEIS} not known? >>> >> what is your build host ?. >> I would suggest to setup a clean build system ( may be a VM ) and try >> it out on that > > Thanks Khem Raj, > > my build host is a gentoo system. I know it is not officially > supported, but I'm using it for ages. Thus I know my way around. At > least a little bit. Would be nice not to switch. > I've removed my yocto-dir several times and made a fresh git-clone. > I've tried with the daisy and the jethro branch. I've tried to build > core-image-minimal and core-image-sato for qemu and the beaglebone > black. I did that on two different gentoo-machines, on one of them > things compiled fine. In the beginning I've had the impression, the > faults on the failing-gentoo system could be due to the missing > multilib support. Thus I replaced it with a fresh and clean install > supporting gcc-multilib stuff. > > The error stays - with small variation - more or less the same: > > attr-native does not finish its build-process. > > 1) It stops with the message similiar to "o pl.mo pl.poto" after gmake > left the directory getfattr or setfattr > > or > > 2) It fails with "gmake[2]: o: Command not found" > > or > > 3) It fails with "gmake[2]: ../-libtool: Command not found " > > > This is really weird. I'm not able to figure the small but important > differences on my two different gentoo machines. > > Any help is really appreciated, > > Kaffesurrogat > >>>>> Sorry guys ..... >>>>> >>>>> I thought I was done. Actually I'm not a bit smarter then before ;-) >>>>> >>>>> I'm still trying to build a yocto-image for a beaglebone. I >>>>> believed, that the reason why yocto stopped compiling at >>>>> attr-native-2.4.47-r0 was the missing gcc-multilib support. I've >>>>> tried the same build on a gentoo machine at work, which had a >>>>> multilib environment, and it finished. >>>>> >>>>> I've setup a new gentoo with multilib environment on my laptop but >>>>> ...... bitbake stops again at attr-native. So this was not the >>>>> trick. The log.do_compile in >>>>> >>>>> /home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/x86_64-linux/attr-native/2.4.47-r0/temp >>>>> >>>>> >>>>> says nothing special, at least for me. Here is the quote: >>>>> >>>>> ----------------------------------------------------------------------------------------------------- >>>>> >>>>> >>>>> x86_64-linux-libtool: link: gcc -o .libs/setfattr -Wl,-rpath-link >>>>> -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib >>>>> -Wl,-rpath-link >>>>> -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/lib >>>>> -Wl,-rpath >>>>> -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib >>>>> -Wl,-rpath >>>>> -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/lib >>>>> -Wl,-O1 -Wl,-rpath-link >>>>> -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib >>>>> -Wl,-rpath-link >>>>> -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/lib >>>>> -Wl,-rpath >>>>> -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib >>>>> -Wl,-rpath >>>>> -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/lib >>>>> -Wl,-O1 -Wl,-rpath-link >>>>> -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib >>>>> -Wl,-rpath-link >>>>> -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/lib > -Wl,-rpath > -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib > -Wl,-rpath > -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysrootgmake[2]: > Leaving directory > '/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/x86_64-linux/attr-native/2.4.47-r0/attr-2.4.47/setfattr' >>>>> >>>>> o fr.mo fr.po >>>>> >>>>> ------------------------------------------------------------------------------------------------------- >>>>> >>>> >>>> ADD-ON: >>>> >>>> I've had a look in the log.do-compile-file on my machine at work. It >>>> says ..... >>>> >>>> ----------------------------------------------------------------------------------------------------------- >>>> >>>> >>>> o fr.mo fr.po >>>> gmake[3]: Nothing to be done for 'default'. >>>> gmake[3]: Leaving directory >>>> '/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/x86_64-linux/attr-native/2.4.47-r0/attr-2.4.47/man/man1' >>>> >>>> /usr/bin/gmake -C man2 >>>> gmake[2]: o: Command not found >>>> ../include/buildrules:66: recipe for target 'fr.mo' failed >>>> gmake[2]: [fr.mo] Error 127 (ignored) >>>> >>>> ----------------------------------------------------------------------------------------------------------- >>>> >>>> >>>> Well ..... ???????????????? >>>> >>>>> It will stay at this point forever. >>>>> >>>>> >>>>> The last output messages of bitbake: >>>>> >>>>> >>>>> -------------------------------------------------------------------------------------------------------- >>>>> >>>>> >>>>> + rm -rf >>>>> /home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/beaglebone-poky-linux-gnueabi/linux-yocto/3.14.4+gitAUTOINC+183622e809_0143c6ebb4-r0/sstate-build-populate_lic/ >>>>> >>>>> + ret=0 >>>>> + trap '' 0 >>>>> + exit 0 >>>>> >>>>> [INFO] Pre-processed cfg file beaglebone-standard-config-3.14.4 >>>>> created. >>>>> [INFO] processing of raw cfg data completed. >>>>> >>>>> >>>>> ******************************************************************************** >>>>> >>>>> Configuration stored in >>>>> /home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/beaglebone-poky-linux-gnueabi/linux-yocto/3.14.4+gitAUTOINC+183622e809_0143c6ebb4-r0/linux-beaglebone-standard-build/.config >>>>> ******************************************************************************** >>>>> >>>>> >>>>> To build with this kernel configuration, ensure a suitable >>>>> toolchain >>>>> is in your path for arm, note its common command prefix, and do: >>>>> >>>>> make >>>>> O=/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/beaglebone-poky-linux-gnueabi/linux-yocto/3.14.4+gitAUTOINC+183622e809_0143c6ebb4-r0/linux-beaglebone-standard-build >>>>> ARCH=arm \ >>>>> CROSS_COMPILE=<cross-compile-prefix> >>>>> >>>>> >>>>> + '[' 0 -ne 0 ']' >>>>> >>>>> + echo '# Global settings from linux recipe' >>>>> + echo 'CONFIG_LOCALVERSION="-yocto-standard"' >>>>> + ret=0 >>>>> + trap '' 0 >>>>> + exit 0 >>>>> >>>>> Currently 1 running tasks (1040 of 1770): >>>>> 0: attr-native-2.4.47-r0 do_compile (pid 1778) >>>>> >>>>> ------------------------------------------------------------------------------------------------- >>>>> >>>>> >>>>> To be honest, I'm lost .... >>>>> >>>>> Would be happy about some help, >>>>> >>>>> kaffeesurrogat >>>>> >>>>> >>>>> On 07.12.2015 21:16, kaffeesurrogat@posteo.de wrote: >>>>>> cd >>>>>> /home/nico/yocto_bb/poky/build_bbb/tmp/work/cortexa8hf-vfp-neon-poky-linux-gnueabi/gcc-cross-initial/4.8.2-r0/gcc-4.8.2/build.i686-linux.arm-poky-linux-gnueabi >>> -- >>> _______________________________________________ >>> yocto mailing list >>> yocto@yoctoproject.org >>> https://lists.yoctoproject.org/listinfo/yocto > > ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [SOLVED] Re: BeagleBone...bitbake -v core-image-sato stops 2016-01-03 11:24 ` [SOLVED] " kaffeesurrogat @ 2016-01-03 16:27 ` Khem Raj 0 siblings, 0 replies; 13+ messages in thread From: Khem Raj @ 2016-01-03 16:27 UTC (permalink / raw) To: kaffeesurrogat; +Cc: yocto@yoctoproject.org On Sun, Jan 3, 2016 at 3:24 AM, kaffeesurrogat <kaffeesurrogat@posteo.de> wrote: > Hello to all and a happy new year, > > the do_compile of attr-native is finishing now on a gentoo host. > > I've copied the source of attr-native over to my gentoo host and run the > ./configure, make .... process. > > I've compared the config.log - files of yocto and gentoo. The difference was > " enable_gettext='yes' " on the gentoo host > and " enable_gettext='no' " in the yocto-build-environment. Disabling > gettext on the gentoo host led to the same behaviour. The compilation or > linking stopped wiht the message "o fr.mo fr.po". > > I've changed the variable EXTRA_OECONF.... to: > EXTRA_OECONF_append_class-native = " --enable-gettext=yes" in the file > "ea-acl.inc" of the yocto-project, which resides in > "meta/recipes-support/attr/". The build finished. > > As Khem Raj told me, I've used a virtualmachine with ubuntu to build the > yocto-project. On ubuntu there was no need to enable gettext via ea-acl.inc. > The build finished without any extra measures. you should see why it worked on ubuntu. why gettext is not detected on gentoo. native packages should not disable it > > Have fun, > > kaffessurrogat > > > > On 29.12.2015 11:21, kaffeesurrogat wrote: >> >> >> On 28.12.2015 23:00, Khem Raj wrote: >>>> >>>> On Dec 28, 2015, at 8:56 AM, kaffeesurrogat <kaffeesurrogat@posteo.de> >>>> wrote: >>>> >>>> Hello again, >>>> >>>> well I'm really a noob and guessing what to do. Well I've interrupted >>>> bitbake cause >>>> nothing was happing and the log.do_compile of attr-native didn't show >>>> any error message. I've started it all over again an now I do get an error >>>> message: yes ;-) >>>> >>>> it says: >>>> >>>> gmake[2]: ../-libtool: Command not found >>>> >>>> This looks a little bit weird to me, especially the "minus" in front of >>>> the "libtool" ..... >>>> >>>> Where does it come from? A missing or empty variable? Something like >>>> ${MYNAMEIS}-libtool an ${MYNAMEIS} not known? >>>> >>> what is your build host ?. >>> I would suggest to setup a clean build system ( may be a VM ) and try it >>> out on that >> >> >> Thanks Khem Raj, >> >> my build host is a gentoo system. I know it is not officially supported, >> but I'm using it for ages. Thus I know my way around. At least a little bit. >> Would be nice not to switch. >> I've removed my yocto-dir several times and made a fresh git-clone. I've >> tried with the daisy and the jethro branch. I've tried to build >> core-image-minimal and core-image-sato for qemu and the beaglebone black. I >> did that on two different gentoo-machines, on one of them things compiled >> fine. In the beginning I've had the impression, the faults on the >> failing-gentoo system could be due to the missing multilib support. Thus I >> replaced it with a fresh and clean install supporting gcc-multilib stuff. >> >> The error stays - with small variation - more or less the same: >> >> attr-native does not finish its build-process. >> >> 1) It stops with the message similiar to "o pl.mo pl.poto" after gmake >> left the directory getfattr or setfattr >> >> or >> >> 2) It fails with "gmake[2]: o: Command not found" >> >> or >> >> 3) It fails with "gmake[2]: ../-libtool: Command not found " >> >> >> This is really weird. I'm not able to figure the small but important >> differences on my two different gentoo machines. >> >> Any help is really appreciated, >> >> Kaffesurrogat >> >>>>>> Sorry guys ..... >>>>>> >>>>>> I thought I was done. Actually I'm not a bit smarter then before ;-) >>>>>> >>>>>> I'm still trying to build a yocto-image for a beaglebone. I believed, >>>>>> that the reason why yocto stopped compiling at attr-native-2.4.47-r0 was the >>>>>> missing gcc-multilib support. I've tried the same build on a gentoo machine >>>>>> at work, which had a multilib environment, and it finished. >>>>>> >>>>>> I've setup a new gentoo with multilib environment on my laptop but >>>>>> ...... bitbake stops again at attr-native. So this was not the trick. The >>>>>> log.do_compile in >>>>>> >>>>>> >>>>>> /home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/x86_64-linux/attr-native/2.4.47-r0/temp >>>>>> >>>>>> says nothing special, at least for me. Here is the quote: >>>>>> >>>>>> >>>>>> ----------------------------------------------------------------------------------------------------- >>>>>> >>>>>> x86_64-linux-libtool: link: gcc -o .libs/setfattr -Wl,-rpath-link >>>>>> -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib >>>>>> -Wl,-rpath-link >>>>>> -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/lib >>>>>> -Wl,-rpath >>>>>> -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib >>>>>> -Wl,-rpath >>>>>> -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/lib >>>>>> -Wl,-O1 -Wl,-rpath-link >>>>>> -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib >>>>>> -Wl,-rpath-link >>>>>> -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/lib >>>>>> -Wl,-rpath >>>>>> -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib >>>>>> -Wl,-rpath >>>>>> -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/lib >>>>>> -Wl,-O1 -Wl,-rpath-link >>>>>> -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib >>>>>> -Wl,-rpath-link >>>>>> -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/lib >> >> -Wl,-rpath >> -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib >> -Wl,-rpath >> -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysrootgmake[2]: Leaving >> directory >> '/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/x86_64-linux/attr-native/2.4.47-r0/attr-2.4.47/setfattr' >>>>>> >>>>>> >>>>>> o fr.mo fr.po >>>>>> >>>>>> >>>>>> ------------------------------------------------------------------------------------------------------- >>>>> >>>>> >>>>> ADD-ON: >>>>> >>>>> I've had a look in the log.do-compile-file on my machine at work. It >>>>> says ..... >>>>> >>>>> >>>>> ----------------------------------------------------------------------------------------------------------- >>>>> >>>>> o fr.mo fr.po >>>>> gmake[3]: Nothing to be done for 'default'. >>>>> gmake[3]: Leaving directory >>>>> >>>>> '/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/x86_64-linux/attr-native/2.4.47-r0/attr-2.4.47/man/man1' >>>>> /usr/bin/gmake -C man2 >>>>> gmake[2]: o: Command not found >>>>> ../include/buildrules:66: recipe for target 'fr.mo' failed >>>>> gmake[2]: [fr.mo] Error 127 (ignored) >>>>> >>>>> >>>>> ----------------------------------------------------------------------------------------------------------- >>>>> >>>>> Well ..... ???????????????? >>>>> >>>>>> It will stay at this point forever. >>>>>> >>>>>> >>>>>> The last output messages of bitbake: >>>>>> >>>>>> >>>>>> >>>>>> -------------------------------------------------------------------------------------------------------- >>>>>> >>>>>> + rm -rf >>>>>> /home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/beaglebone-poky-linux-gnueabi/linux-yocto/3.14.4+gitAUTOINC+183622e809_0143c6ebb4-r0/sstate-build-populate_lic/ >>>>>> >>>>>> + ret=0 >>>>>> + trap '' 0 >>>>>> + exit 0 >>>>>> >>>>>> [INFO] Pre-processed cfg file beaglebone-standard-config-3.14.4 >>>>>> created. >>>>>> [INFO] processing of raw cfg data completed. >>>>>> >>>>>> >>>>>> >>>>>> ******************************************************************************** >>>>>> Configuration stored in >>>>>> /home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/beaglebone-poky-linux-gnueabi/linux-yocto/3.14.4+gitAUTOINC+183622e809_0143c6ebb4-r0/linux-beaglebone-standard-build/.config >>>>>> >>>>>> ******************************************************************************** >>>>>> >>>>>> To build with this kernel configuration, ensure a suitable toolchain >>>>>> is in your path for arm, note its common command prefix, and do: >>>>>> >>>>>> make >>>>>> O=/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/beaglebone-poky-linux-gnueabi/linux-yocto/3.14.4+gitAUTOINC+183622e809_0143c6ebb4-r0/linux-beaglebone-standard-build >>>>>> ARCH=arm \ >>>>>> CROSS_COMPILE=<cross-compile-prefix> >>>>>> >>>>>> >>>>>> + '[' 0 -ne 0 ']' >>>>>> >>>>>> + echo '# Global settings from linux recipe' >>>>>> + echo 'CONFIG_LOCALVERSION="-yocto-standard"' >>>>>> + ret=0 >>>>>> + trap '' 0 >>>>>> + exit 0 >>>>>> >>>>>> Currently 1 running tasks (1040 of 1770): >>>>>> 0: attr-native-2.4.47-r0 do_compile (pid 1778) >>>>>> >>>>>> >>>>>> ------------------------------------------------------------------------------------------------- >>>>>> >>>>>> To be honest, I'm lost .... >>>>>> >>>>>> Would be happy about some help, >>>>>> >>>>>> kaffeesurrogat >>>>>> >>>>>> >>>>>> On 07.12.2015 21:16, kaffeesurrogat@posteo.de wrote: >>>>>>> >>>>>>> cd >>>>>>> /home/nico/yocto_bb/poky/build_bbb/tmp/work/cortexa8hf-vfp-neon-poky-linux-gnueabi/gcc-cross-initial/4.8.2-r0/gcc-4.8.2/build.i686-linux.arm-poky-linux-gnueabi >>>> >>>> -- >>>> _______________________________________________ >>>> yocto mailing list >>>> yocto@yoctoproject.org >>>> https://lists.yoctoproject.org/listinfo/yocto >> >> >> > > -- > _______________________________________________ > yocto mailing list > yocto@yoctoproject.org > https://lists.yoctoproject.org/listinfo/yocto ^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2016-01-03 16:27 UTC | newest] Thread overview: 13+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2015-12-06 10:16 BeagleBone...bitbake -v core-image-sato stops kaffeesurrogat 2015-12-06 14:57 ` Michael Habibi 2015-12-06 17:32 ` kaffeesurrogat 2015-12-07 20:16 ` kaffeesurrogat 2015-12-28 8:58 ` kaffeesurrogat 2015-12-28 9:09 ` Nico Mock 2015-12-28 9:31 ` kaffeesurrogat 2015-12-28 9:58 ` kaffeesurrogat 2015-12-28 16:56 ` kaffeesurrogat 2015-12-28 22:00 ` Khem Raj 2015-12-29 10:21 ` kaffeesurrogat 2016-01-03 11:24 ` [SOLVED] " kaffeesurrogat 2016-01-03 16:27 ` Khem Raj
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.