From: Sinan Kaya <okaya@codeaurora.org>
To: devicetree@vger.kernel.org, vinod.koul@intel.com
Cc: dmaengine@vger.kernel.org, mark.rutland@arm.com,
timur@codeaurora.org, cov@codeaurora.org, jcm@redhat.com,
agross@codeaurora.org, arnd@arndb.de,
linux-arm-msm@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH V11 0/7] dma: add Qualcomm Technologies HIDMA driver
Date: Sun, 3 Jan 2016 19:09:23 -0500 [thread overview]
Message-ID: <5689B833.7010901@codeaurora.org> (raw)
In-Reply-To: <1451865996-12808-1-git-send-email-okaya@codeaurora.org>
Hi Vinod,
On 1/3/2016 7:06 PM, Sinan Kaya wrote:
> The Qualcomm Technologies HIDMA device has been designed
> to support virtualization technology. The driver has been
> divided into two to follow the hardware design.
>
> 1. HIDMA Management driver
> 2. HIDMA Channel driver
>
> Each HIDMA HW consists of multiple channels. These channels
> share some set of common parameters. These parameters are
> initialized by the management driver during power up.
> Same management driver is used for monitoring the execution
> of the channels. Management driver can change the performance
> behavior dynamically such as bandwidth allocation and
> prioritization in the future.
>
> The management driver is executed in hypervisor context and
> is the main management entity for all channels provided by
> the device.
>
> Changes from V10: (https://lkml.org/lkml/2015/12/17/454)
> * none
>
> Changes from V10: (https://lkml.org/lkml/2015/12/17/448)
> * none
>
> Changes from V10: (https://lkml.org/lkml/2015/12/17/449)
> * none
>
> Changes from V10: (https://lkml.org/lkml/2015/12/17/451)
> * none
>
> Changes from V10: (https://lkml.org/lkml/2015/12/17/452)
> * none
>
> Changes from V10: (https://lkml.org/lkml/2015/12/17/453)
> * none
>
> Changes from V10: (https://lkml.org/lkml/2015/12/17/450)
> * Clean up style issues
> * make depend on CONFIG_OF_IRQ too as SPARC arch doesn't seem to define
> CONFIG_OF_IRQ but it defines CONFIG_OF.
>
> Sinan Kaya (7):
> dma: qcom_bam_dma: move to qcom directory
> dma: hidma: Add Device Tree support
> dma: add Qualcomm Technologies HIDMA management driver
> dma: add Qualcomm Technologies HIDMA channel driver
> dma: qcom_hidma: implement lower level hardware interface
> dma: qcom_hidma: add debugfs hooks
> dma: qcom_hidma: add support for object hierarchy
>
> Documentation/ABI/testing/sysfs-platform-hidma | 9 +
> .../ABI/testing/sysfs-platform-hidma-mgmt | 97 +++
> .../devicetree/bindings/dma/qcom_hidma_mgmt.txt | 79 ++
> drivers/dma/Kconfig | 11 +-
> drivers/dma/Makefile | 2 +-
> drivers/dma/qcom/Kconfig | 29 +
> drivers/dma/qcom/Makefile | 5 +
> drivers/dma/{qcom_bam_dma.c => qcom/bam_dma.c} | 4 +-
> drivers/dma/qcom/hidma.c | 784 +++++++++++++++++
> drivers/dma/qcom/hidma.h | 162 ++++
> drivers/dma/qcom/hidma_dbg.c | 219 +++++
> drivers/dma/qcom/hidma_ll.c | 927 +++++++++++++++++++++
> drivers/dma/qcom/hidma_mgmt.c | 400 +++++++++
> drivers/dma/qcom/hidma_mgmt.h | 39 +
> drivers/dma/qcom/hidma_mgmt_sys.c | 295 +++++++
> 15 files changed, 3050 insertions(+), 12 deletions(-)
> create mode 100644 Documentation/ABI/testing/sysfs-platform-hidma
> create mode 100644 Documentation/ABI/testing/sysfs-platform-hidma-mgmt
> create mode 100644 Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt
> create mode 100644 drivers/dma/qcom/Kconfig
> create mode 100644 drivers/dma/qcom/Makefile
> rename drivers/dma/{qcom_bam_dma.c => qcom/bam_dma.c} (99%)
> create mode 100644 drivers/dma/qcom/hidma.c
> create mode 100644 drivers/dma/qcom/hidma.h
> create mode 100644 drivers/dma/qcom/hidma_dbg.c
> create mode 100644 drivers/dma/qcom/hidma_ll.c
> create mode 100644 drivers/dma/qcom/hidma_mgmt.c
> create mode 100644 drivers/dma/qcom/hidma_mgmt.h
> create mode 100644 drivers/dma/qcom/hidma_mgmt_sys.c
>
Can I have your ACK on your series if you are OK?
Sinan
--
Sinan Kaya
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project
WARNING: multiple messages have this Message-ID (diff)
From: okaya@codeaurora.org (Sinan Kaya)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V11 0/7] dma: add Qualcomm Technologies HIDMA driver
Date: Sun, 3 Jan 2016 19:09:23 -0500 [thread overview]
Message-ID: <5689B833.7010901@codeaurora.org> (raw)
In-Reply-To: <1451865996-12808-1-git-send-email-okaya@codeaurora.org>
Hi Vinod,
On 1/3/2016 7:06 PM, Sinan Kaya wrote:
> The Qualcomm Technologies HIDMA device has been designed
> to support virtualization technology. The driver has been
> divided into two to follow the hardware design.
>
> 1. HIDMA Management driver
> 2. HIDMA Channel driver
>
> Each HIDMA HW consists of multiple channels. These channels
> share some set of common parameters. These parameters are
> initialized by the management driver during power up.
> Same management driver is used for monitoring the execution
> of the channels. Management driver can change the performance
> behavior dynamically such as bandwidth allocation and
> prioritization in the future.
>
> The management driver is executed in hypervisor context and
> is the main management entity for all channels provided by
> the device.
>
> Changes from V10: (https://lkml.org/lkml/2015/12/17/454)
> * none
>
> Changes from V10: (https://lkml.org/lkml/2015/12/17/448)
> * none
>
> Changes from V10: (https://lkml.org/lkml/2015/12/17/449)
> * none
>
> Changes from V10: (https://lkml.org/lkml/2015/12/17/451)
> * none
>
> Changes from V10: (https://lkml.org/lkml/2015/12/17/452)
> * none
>
> Changes from V10: (https://lkml.org/lkml/2015/12/17/453)
> * none
>
> Changes from V10: (https://lkml.org/lkml/2015/12/17/450)
> * Clean up style issues
> * make depend on CONFIG_OF_IRQ too as SPARC arch doesn't seem to define
> CONFIG_OF_IRQ but it defines CONFIG_OF.
>
> Sinan Kaya (7):
> dma: qcom_bam_dma: move to qcom directory
> dma: hidma: Add Device Tree support
> dma: add Qualcomm Technologies HIDMA management driver
> dma: add Qualcomm Technologies HIDMA channel driver
> dma: qcom_hidma: implement lower level hardware interface
> dma: qcom_hidma: add debugfs hooks
> dma: qcom_hidma: add support for object hierarchy
>
> Documentation/ABI/testing/sysfs-platform-hidma | 9 +
> .../ABI/testing/sysfs-platform-hidma-mgmt | 97 +++
> .../devicetree/bindings/dma/qcom_hidma_mgmt.txt | 79 ++
> drivers/dma/Kconfig | 11 +-
> drivers/dma/Makefile | 2 +-
> drivers/dma/qcom/Kconfig | 29 +
> drivers/dma/qcom/Makefile | 5 +
> drivers/dma/{qcom_bam_dma.c => qcom/bam_dma.c} | 4 +-
> drivers/dma/qcom/hidma.c | 784 +++++++++++++++++
> drivers/dma/qcom/hidma.h | 162 ++++
> drivers/dma/qcom/hidma_dbg.c | 219 +++++
> drivers/dma/qcom/hidma_ll.c | 927 +++++++++++++++++++++
> drivers/dma/qcom/hidma_mgmt.c | 400 +++++++++
> drivers/dma/qcom/hidma_mgmt.h | 39 +
> drivers/dma/qcom/hidma_mgmt_sys.c | 295 +++++++
> 15 files changed, 3050 insertions(+), 12 deletions(-)
> create mode 100644 Documentation/ABI/testing/sysfs-platform-hidma
> create mode 100644 Documentation/ABI/testing/sysfs-platform-hidma-mgmt
> create mode 100644 Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt
> create mode 100644 drivers/dma/qcom/Kconfig
> create mode 100644 drivers/dma/qcom/Makefile
> rename drivers/dma/{qcom_bam_dma.c => qcom/bam_dma.c} (99%)
> create mode 100644 drivers/dma/qcom/hidma.c
> create mode 100644 drivers/dma/qcom/hidma.h
> create mode 100644 drivers/dma/qcom/hidma_dbg.c
> create mode 100644 drivers/dma/qcom/hidma_ll.c
> create mode 100644 drivers/dma/qcom/hidma_mgmt.c
> create mode 100644 drivers/dma/qcom/hidma_mgmt.h
> create mode 100644 drivers/dma/qcom/hidma_mgmt_sys.c
>
Can I have your ACK on your series if you are OK?
Sinan
--
Sinan Kaya
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2016-01-04 0:09 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-04 0:06 [PATCH V11 0/7] dma: add Qualcomm Technologies HIDMA driver Sinan Kaya
2016-01-04 0:06 ` Sinan Kaya
2016-01-04 0:06 ` [PATCH V11 1/7] dma: qcom_bam_dma: move to qcom directory Sinan Kaya
2016-01-04 0:06 ` Sinan Kaya
2016-01-04 0:06 ` Sinan Kaya
2016-01-04 0:06 ` [PATCH V11 2/7] dma: hidma: Add Device Tree support Sinan Kaya
2016-01-04 0:06 ` Sinan Kaya
2016-01-04 0:06 ` [PATCH V11 3/7] dma: add Qualcomm Technologies HIDMA management driver Sinan Kaya
2016-01-04 0:06 ` Sinan Kaya
2016-01-04 0:06 ` Sinan Kaya
2016-01-04 18:37 ` Andy Shevchenko
2016-01-04 18:37 ` Andy Shevchenko
2016-01-05 4:46 ` Vinod Koul
2016-01-05 4:46 ` Vinod Koul
2016-01-10 13:14 ` Sinan Kaya
2016-01-10 13:14 ` Sinan Kaya
2016-01-04 0:06 ` [PATCH V11 4/7] dma: add Qualcomm Technologies HIDMA channel driver Sinan Kaya
2016-01-04 0:06 ` Sinan Kaya
2016-01-04 18:43 ` Andy Shevchenko
2016-01-04 18:43 ` Andy Shevchenko
2016-01-05 14:05 ` Sinan Kaya
2016-01-05 14:05 ` Sinan Kaya
2016-01-04 0:06 ` [PATCH V11 5/7] dma: qcom_hidma: implement lower level hardware interface Sinan Kaya
2016-01-04 0:06 ` Sinan Kaya
2016-01-04 19:01 ` Andy Shevchenko
2016-01-04 19:01 ` Andy Shevchenko
2016-01-10 14:03 ` Sinan Kaya
2016-01-10 14:03 ` Sinan Kaya
2016-01-04 0:06 ` [PATCH V11 6/7] dma: qcom_hidma: add debugfs hooks Sinan Kaya
2016-01-04 0:06 ` Sinan Kaya
2016-01-04 0:06 ` [PATCH V11 7/7] dma: qcom_hidma: add support for object hierarchy Sinan Kaya
2016-01-04 0:06 ` Sinan Kaya
2016-01-04 0:09 ` Sinan Kaya [this message]
2016-01-04 0:09 ` [PATCH V11 0/7] dma: add Qualcomm Technologies HIDMA driver Sinan Kaya
[not found] ` <5689B833.7010901-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2016-01-04 3:36 ` Vinod Koul
2016-01-04 3:36 ` Vinod Koul
2016-01-04 3:36 ` Vinod Koul
2016-01-04 3:51 ` Sinan Kaya
2016-01-04 3:51 ` Sinan Kaya
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5689B833.7010901@codeaurora.org \
--to=okaya@codeaurora.org \
--cc=agross@codeaurora.org \
--cc=arnd@arndb.de \
--cc=cov@codeaurora.org \
--cc=devicetree@vger.kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=jcm@redhat.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=timur@codeaurora.org \
--cc=vinod.koul@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.