From: Jianqun Xu <jay.xu@rock-chips.com>
To: Heiko Stuebner <heiko@sntech.de>, Mark Brown <broonie@kernel.org>
Cc: robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com,
ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
jwerner@chromium.org, catalin.marinas@arm.com,
will.deacon@arm.com, sboyd@codeaurora.org,
linus.walleij@linaro.org, sjoerd.simons@collabora.co.uk,
huangtao@rock-chips.com, linux-rockchip@lists.infradead.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org
Subject: Re: [PATCH v2.1 2/4] spi: rockchip: add bindings for rk3399 spi
Date: Thu, 18 Feb 2016 17:57:49 +0800 [thread overview]
Message-ID: <56C5959D.3030806@rock-chips.com> (raw)
In-Reply-To: <2327512.KAqs6H56Km@phil>
Hi Heiko
Thank you for you kindly explain, now I got your comments.
在 18/02/2016 17:47, Heiko Stuebner 写道:
> From: Xu Jianqun <jay.xu@rock-chips.com>
>
> Add devicetree bindings for Rockchip rk3399 spi which found on
> Rockchip rk3399 SoCs.
>
> Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
> ---
> Hi Jianqun,
> what Mark means is the following.
>
> Documentation/devicetree/bindings/spi/spi-rockchip.txt | 1 +
> drivers/spi/spi-rockchip.c | 1 +
> 2 files changed, 2 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.txt b/Documentation/devicetree/bindings/spi/spi-rockchip.txt
> index 0c491bd..1b14d69 100644
> --- a/Documentation/devicetree/bindings/spi/spi-rockchip.txt
> +++ b/Documentation/devicetree/bindings/spi/spi-rockchip.txt
> @@ -9,6 +9,7 @@ Required Properties:
> "rockchip,rk3066-spi" for rk3066.
> "rockchip,rk3188-spi", "rockchip,rk3066-spi" for rk3188.
> "rockchip,rk3288-spi", "rockchip,rk3066-spi" for rk3288.
> + "rockchip,rk3399-spi", "rockchip,rk3066-spi" for rk3399.
> - reg: physical base address of the controller and length of memory mapped
> region.
> - interrupts: The interrupt number to the cpu. The interrupt specifier format
> diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c
> index 79a8bc4..345fefd 100644
> --- a/drivers/spi/spi-rockchip.c
> +++ b/drivers/spi/spi-rockchip.c
> @@ -868,6 +868,7 @@ static const struct of_device_id rockchip_spi_dt_match[] = {
> { .compatible = "rockchip,rk3066-spi", },
> { .compatible = "rockchip,rk3188-spi", },
> { .compatible = "rockchip,rk3288-spi", },
> + { .compatible = "rockchip,rk3399-spi", },
I'm a little confuse, I have upstreamed rockchip-i2s, and the i2s driver
set the compatible like:
- compatible: should be one of the followings
- "rockchip,rk3066-i2s": for rk3066
- "rockchip,rk3188-i2s", "rockchip,rk3066-i2s": for rk3188
- "rockchip,rk3288-i2s", "rockchip,rk3066-i2s": for rk3288
- "rockchip,rk3399-i2s", "rockchip,rk3066-i2s": for rk3399
and the driver only has
static const struct of_device_id rockchip_i2s_match[] = {
{ .compatible = "rockchip,rk3066-i2s", },
{},
};
The spi of rk3399 as same as rk3066, rk3188, rk3288, like i2s, if they
are keep different rules ?
> { },
> };
> MODULE_DEVICE_TABLE(of, rockchip_spi_dt_match);
>
WARNING: multiple messages have this Message-ID (diff)
From: jay.xu@rock-chips.com (Jianqun Xu)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2.1 2/4] spi: rockchip: add bindings for rk3399 spi
Date: Thu, 18 Feb 2016 17:57:49 +0800 [thread overview]
Message-ID: <56C5959D.3030806@rock-chips.com> (raw)
In-Reply-To: <2327512.KAqs6H56Km@phil>
Hi Heiko
Thank you for you kindly explain, now I got your comments.
? 18/02/2016 17:47, Heiko Stuebner ??:
> From: Xu Jianqun <jay.xu@rock-chips.com>
>
> Add devicetree bindings for Rockchip rk3399 spi which found on
> Rockchip rk3399 SoCs.
>
> Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
> ---
> Hi Jianqun,
> what Mark means is the following.
>
> Documentation/devicetree/bindings/spi/spi-rockchip.txt | 1 +
> drivers/spi/spi-rockchip.c | 1 +
> 2 files changed, 2 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.txt b/Documentation/devicetree/bindings/spi/spi-rockchip.txt
> index 0c491bd..1b14d69 100644
> --- a/Documentation/devicetree/bindings/spi/spi-rockchip.txt
> +++ b/Documentation/devicetree/bindings/spi/spi-rockchip.txt
> @@ -9,6 +9,7 @@ Required Properties:
> "rockchip,rk3066-spi" for rk3066.
> "rockchip,rk3188-spi", "rockchip,rk3066-spi" for rk3188.
> "rockchip,rk3288-spi", "rockchip,rk3066-spi" for rk3288.
> + "rockchip,rk3399-spi", "rockchip,rk3066-spi" for rk3399.
> - reg: physical base address of the controller and length of memory mapped
> region.
> - interrupts: The interrupt number to the cpu. The interrupt specifier format
> diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c
> index 79a8bc4..345fefd 100644
> --- a/drivers/spi/spi-rockchip.c
> +++ b/drivers/spi/spi-rockchip.c
> @@ -868,6 +868,7 @@ static const struct of_device_id rockchip_spi_dt_match[] = {
> { .compatible = "rockchip,rk3066-spi", },
> { .compatible = "rockchip,rk3188-spi", },
> { .compatible = "rockchip,rk3288-spi", },
> + { .compatible = "rockchip,rk3399-spi", },
I'm a little confuse, I have upstreamed rockchip-i2s, and the i2s driver
set the compatible like:
- compatible: should be one of the followings
- "rockchip,rk3066-i2s": for rk3066
- "rockchip,rk3188-i2s", "rockchip,rk3066-i2s": for rk3188
- "rockchip,rk3288-i2s", "rockchip,rk3066-i2s": for rk3288
- "rockchip,rk3399-i2s", "rockchip,rk3066-i2s": for rk3399
and the driver only has
static const struct of_device_id rockchip_i2s_match[] = {
{ .compatible = "rockchip,rk3066-i2s", },
{},
};
The spi of rk3399 as same as rk3066, rk3188, rk3288, like i2s, if they
are keep different rules ?
> { },
> };
> MODULE_DEVICE_TABLE(of, rockchip_spi_dt_match);
>
next prev parent reply other threads:[~2016-02-18 9:57 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-18 2:36 [PATCH v2 0/4] Add core dtsi for rk3399 from Rockchip jianqun.xu
2016-02-18 2:36 ` jianqun.xu
2016-02-18 2:36 ` jianqun.xu
2016-02-18 2:36 ` [PATCH v2 1/4] clk: rockchip: add dt-binding header for rk3399 jianqun.xu
2016-02-18 2:36 ` jianqun.xu
[not found] ` <1455762983-29980-1-git-send-email-jay.xu-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2016-02-18 2:36 ` [PATCH v2 2/4] spi: rockchip: add bindings for rk3399 spi jianqun.xu
2016-02-18 2:36 ` jianqun.xu
2016-02-18 2:36 ` jianqun.xu
[not found] ` <1455762983-29980-3-git-send-email-jay.xu-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2016-02-18 9:41 ` Mark Brown
2016-02-18 9:41 ` Mark Brown
2016-02-18 9:41 ` Mark Brown
[not found] ` <20160218094108.GA7129-GFdadSzt00ze9xe1eoZjHA@public.gmane.org>
2016-02-18 9:47 ` [PATCH v2.1 " Heiko Stuebner
2016-02-18 9:47 ` Heiko Stuebner
2016-02-18 9:47 ` Heiko Stuebner
2016-02-18 9:57 ` Jianqun Xu [this message]
2016-02-18 9:57 ` Jianqun Xu
[not found] ` <56C5959D.3030806-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2016-02-18 13:57 ` Mark Brown
2016-02-18 13:57 ` Mark Brown
2016-02-18 13:57 ` Mark Brown
[not found] ` <20160218135751.GE7129-GFdadSzt00ze9xe1eoZjHA@public.gmane.org>
2016-02-19 2:44 ` Jianqun Xu
2016-02-19 2:44 ` Jianqun Xu
2016-02-19 2:44 ` Jianqun Xu
2016-02-18 2:36 ` [PATCH v2 3/4] dt-bindings: add documentation of rk3399 clock controller jianqun.xu
2016-02-18 2:36 ` jianqun.xu
2016-02-18 2:36 ` [PATCH v2 4/4] ARM64: dts: rockchip: add core dtsi file for rk3399 jianqun.xu
2016-02-18 2:36 ` jianqun.xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56C5959D.3030806@rock-chips.com \
--to=jay.xu@rock-chips.com \
--cc=broonie@kernel.org \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=heiko@sntech.de \
--cc=huangtao@rock-chips.com \
--cc=ijc+devicetree@hellion.org.uk \
--cc=jwerner@chromium.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@codeaurora.org \
--cc=sjoerd.simons@collabora.co.uk \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.