From: Roger Quadros <rogerq@ti.com>
To: <computersforpeace@gmail.com>
Cc: <tony@atomide.com>, <dwmw2@infradead.org>,
<ezequiel@vanguardiasur.com.ar>, <javier@dowhile0.org>,
<fcooper@ti.com>, <nsekhar@ti.com>,
<linux-mtd@lists.infradead.org>, <linux-omap@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v5 00/26] memory: omap-gpmc: mtd: nand: Support GPMC NAND on non-OMAP platforms
Date: Mon, 29 Feb 2016 18:25:12 +0200 [thread overview]
Message-ID: <56D470E8.4070106@ti.com> (raw)
In-Reply-To: <1455916548-3441-1-git-send-email-rogerq@ti.com>
Brian,
On 19/02/16 23:15, Roger Quadros wrote:
> Hi,
>
> @Tony
> Patches 15 and 24 are new and will need your review.
> I've modified patch 22 to include the new am335x boards introduced since v4.4.
>
> Patches are based on top of omap-for-v4.6/dt so that the DT changes apply cleanly.
>
> @Brian
> If you can Ack the MTD related changes we can push the series (excluding DT patches)
> to an immutable branch and you can then pull it into l2-mtd.git
Gentle ping on this. Thanks.
cheers,
-roger
>
> Patches tested on:
> dra-evm, am437x-gp-evm, beagleboard-c4, beagleboard-c4-legacyboot
>
> Changelog:
> v5:
> -changed ready/busy# GPIO DT binding from "ready-gpio" to "rb-gpios".
> -use irqdomain for gpmc NAND interrupts: fifoevent and termcount
>
> v4:
> -Warn if using older incompatible DT i.e. compatible property not present
> in nand node.
> -Applied Tony's patch to fix broken ethernet on torpedo.
>
> v3:
> -Fixed and tested NAND using legacy boot on omap3-beagle.
> -Support rising and falling edge interrupts on WAITpins.
> -Update DT node of all gpmc users.
>
> Patches summary:
>
> We do a couple of things in this series which result in
> cleaner device tree implementation, faster perfomance and
> multi-platform support. As an added bonus we get to use the GPMC_WAIT
> pins as GPI/Interrupts.
>
> - Establish a custom interface between NAND and GPMC driver. This is
> needed because all of the NAND registers sit in the GPMC register space.
>
> - Clean up device tree support so that omap-gpmc IP and the omap2 NAND
> driver can be used on non-OMAP platforms. e.g. Keystone.
>
> - Implement GPIOCHIP for the GPMC WAITPINS. SoCs can contain
> 2 to 4 of these and most of them would be unused otherwise. It also
> allows a cleaner implementation of NAND Ready pin status for the NAND driver.
>
> - Implement GPMC IRQ domain to proivde the 2 NAND events and
> GPMC WAITPIN edge interrupts.
>
> - Implement GPIOlib based NAND ready pin checking for OMAP NAND driver.
> On dra7-evm, Read speed increases from 13768 KiB/ to 17246 KiB/s.
> Write speed was unchanged at 7123 KiB/s.
>
> This series is available at
> git@github.com:rogerq/linux.git
> in branch
> for-v4.6/gpmc-v5
>
> --
> cheers,
> -roger
>
> Roger Quadros (26):
> ARM: OMAP2+: gpmc: Add platform data
> ARM: OMAP2+: gpmc: Add gpmc timings and settings to platform data
> memory: omap-gpmc: Introduce GPMC to NAND interface
> mtd: nand: omap2: Use gpmc_omap_get_nand_ops() to get NAND registers
> memory: omap-gpmc: Add GPMC-NAND ops to get writebufferempty status
> mtd: nand: omap2: Switch to using GPMC-NAND ops for writebuffer empty
> check
> memory: omap-gpmc: Implement IRQ domain for NAND IRQs
> mtd: nand: omap: Copy platform data parameters to omap_nand_info data
> mtd: nand: omap: Clean up device tree support
> mtd: nand: omap: Update DT binding documentation
> memory: omap-gpmc: Prevent mapping into 1st 16MB
> memory: omap-gpmc: Move device tree binding to correct location
> memory: omap-gpmc: Support general purpose input for WAITPINs
> memory: omap-gpmc: Reserve WAITPIN if needed for WAIT monitoring
> memory: omap-gpmc: Support WAIT pin edge interrupts
> memory: omap-gpmc: Prevent GPMC_STATUS from being accessed via
> gpmc_regs
> mtd: nand: omap2: Implement NAND ready using gpiolib
> ARM: dts: dra7: Fix NAND device nodes.
> ARM: dts: dra7x-evm: Provide NAND ready pin
> ARM: dts: am437x: Fix NAND device nodes
> ARM: dts: am437x: Provide NAND ready pin
> ARM: dts: am335x: Fix NAND device nodes
> ARM: dts: am335x: Provide NAND ready pin
> ARM: dts: dm814x: Fix gpmc and NAND node
> ARM: dts: dm816x: Fix gpmc and NAND node
> ARM: dts: omap3: Fix gpmc and NAND nodes
>
> Documentation/devicetree/bindings/bus/ti-gpmc.txt | 130 ----
> .../bindings/memory-controllers/omap-gpmc.txt | 141 +++++
> .../devicetree/bindings/mtd/gpmc-nand.txt | 19 +-
> arch/arm/boot/dts/am335x-baltos-ir5221.dts | 10 +-
> arch/arm/boot/dts/am335x-chilisom.dtsi | 9 +-
> arch/arm/boot/dts/am335x-cm-t335.dts | 10 +-
> arch/arm/boot/dts/am335x-evm.dts | 8 +-
> arch/arm/boot/dts/am335x-igep0033.dtsi | 9 +-
> arch/arm/boot/dts/am335x-phycore-som.dtsi | 9 +-
> arch/arm/boot/dts/am33xx.dtsi | 4 +
> arch/arm/boot/dts/am4372.dtsi | 4 +
> arch/arm/boot/dts/am437x-cm-t43.dts | 7 +-
> arch/arm/boot/dts/am437x-gp-evm.dts | 9 +-
> arch/arm/boot/dts/am43x-epos-evm.dts | 9 +-
> arch/arm/boot/dts/dm8148-evm.dts | 8 +-
> arch/arm/boot/dts/dm814x.dtsi | 4 +
> arch/arm/boot/dts/dm8168-evm.dts | 8 +-
> arch/arm/boot/dts/dm816x.dtsi | 4 +
> arch/arm/boot/dts/dra62x-j5eco-evm.dts | 8 +-
> arch/arm/boot/dts/dra7-evm.dts | 7 +-
> arch/arm/boot/dts/dra7.dtsi | 4 +
> arch/arm/boot/dts/dra72-evm.dts | 7 +-
> arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts | 3 +-
> arch/arm/boot/dts/logicpd-torpedo-som.dtsi | 8 +-
> arch/arm/boot/dts/omap3-beagle.dts | 5 +-
> arch/arm/boot/dts/omap3-cm-t3x.dtsi | 6 +-
> arch/arm/boot/dts/omap3-devkit8000-common.dtsi | 4 +
> arch/arm/boot/dts/omap3-evm-37xx.dts | 8 +-
> arch/arm/boot/dts/omap3-gta04.dtsi | 4 +
> arch/arm/boot/dts/omap3-igep.dtsi | 6 +-
> arch/arm/boot/dts/omap3-igep0020-common.dtsi | 4 +-
> arch/arm/boot/dts/omap3-igep0030-common.dtsi | 4 +
> arch/arm/boot/dts/omap3-ldp.dts | 10 +-
> arch/arm/boot/dts/omap3-lilly-a83x.dtsi | 6 +-
> arch/arm/boot/dts/omap3-overo-base.dtsi | 6 +-
> arch/arm/boot/dts/omap3-pandora-common.dtsi | 4 +
> arch/arm/boot/dts/omap3-tao3530.dtsi | 6 +-
> arch/arm/boot/dts/omap3.dtsi | 4 +
> arch/arm/boot/dts/omap3430-sdp.dts | 6 +-
> arch/arm/mach-omap2/gpmc-nand.c | 7 +-
> drivers/memory/Kconfig | 1 +
> drivers/memory/omap-gpmc.c | 653 +++++++++++++--------
> drivers/mtd/nand/omap2.c | 193 ++++--
> include/linux/omap-gpmc.h | 177 ++----
> include/linux/platform_data/gpmc-omap.h | 167 ++++++
> include/linux/platform_data/mtd-nand-omap2.h | 12 +-
> 46 files changed, 1121 insertions(+), 611 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/bus/ti-gpmc.txt
> create mode 100644 Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
> create mode 100644 include/linux/platform_data/gpmc-omap.h
>
WARNING: multiple messages have this Message-ID (diff)
From: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
To: computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
Cc: tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org,
dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org,
ezequiel-30ULvvUtt6G51wMPkGsGjgyUoB5FGQPZ@public.gmane.org,
javier-0uQlZySMnqxg9hUCZPvPmw@public.gmane.org,
fcooper-l0cyMroinI0@public.gmane.org,
nsekhar-l0cyMroinI0@public.gmane.org,
linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH v5 00/26] memory: omap-gpmc: mtd: nand: Support GPMC NAND on non-OMAP platforms
Date: Mon, 29 Feb 2016 18:25:12 +0200 [thread overview]
Message-ID: <56D470E8.4070106@ti.com> (raw)
In-Reply-To: <1455916548-3441-1-git-send-email-rogerq-l0cyMroinI0@public.gmane.org>
Brian,
On 19/02/16 23:15, Roger Quadros wrote:
> Hi,
>
> @Tony
> Patches 15 and 24 are new and will need your review.
> I've modified patch 22 to include the new am335x boards introduced since v4.4.
>
> Patches are based on top of omap-for-v4.6/dt so that the DT changes apply cleanly.
>
> @Brian
> If you can Ack the MTD related changes we can push the series (excluding DT patches)
> to an immutable branch and you can then pull it into l2-mtd.git
Gentle ping on this. Thanks.
cheers,
-roger
>
> Patches tested on:
> dra-evm, am437x-gp-evm, beagleboard-c4, beagleboard-c4-legacyboot
>
> Changelog:
> v5:
> -changed ready/busy# GPIO DT binding from "ready-gpio" to "rb-gpios".
> -use irqdomain for gpmc NAND interrupts: fifoevent and termcount
>
> v4:
> -Warn if using older incompatible DT i.e. compatible property not present
> in nand node.
> -Applied Tony's patch to fix broken ethernet on torpedo.
>
> v3:
> -Fixed and tested NAND using legacy boot on omap3-beagle.
> -Support rising and falling edge interrupts on WAITpins.
> -Update DT node of all gpmc users.
>
> Patches summary:
>
> We do a couple of things in this series which result in
> cleaner device tree implementation, faster perfomance and
> multi-platform support. As an added bonus we get to use the GPMC_WAIT
> pins as GPI/Interrupts.
>
> - Establish a custom interface between NAND and GPMC driver. This is
> needed because all of the NAND registers sit in the GPMC register space.
>
> - Clean up device tree support so that omap-gpmc IP and the omap2 NAND
> driver can be used on non-OMAP platforms. e.g. Keystone.
>
> - Implement GPIOCHIP for the GPMC WAITPINS. SoCs can contain
> 2 to 4 of these and most of them would be unused otherwise. It also
> allows a cleaner implementation of NAND Ready pin status for the NAND driver.
>
> - Implement GPMC IRQ domain to proivde the 2 NAND events and
> GPMC WAITPIN edge interrupts.
>
> - Implement GPIOlib based NAND ready pin checking for OMAP NAND driver.
> On dra7-evm, Read speed increases from 13768 KiB/ to 17246 KiB/s.
> Write speed was unchanged at 7123 KiB/s.
>
> This series is available at
> git-9UaJU3cA/F/QT0dZR+AlfA@public.gmane.org:rogerq/linux.git
> in branch
> for-v4.6/gpmc-v5
>
> --
> cheers,
> -roger
>
> Roger Quadros (26):
> ARM: OMAP2+: gpmc: Add platform data
> ARM: OMAP2+: gpmc: Add gpmc timings and settings to platform data
> memory: omap-gpmc: Introduce GPMC to NAND interface
> mtd: nand: omap2: Use gpmc_omap_get_nand_ops() to get NAND registers
> memory: omap-gpmc: Add GPMC-NAND ops to get writebufferempty status
> mtd: nand: omap2: Switch to using GPMC-NAND ops for writebuffer empty
> check
> memory: omap-gpmc: Implement IRQ domain for NAND IRQs
> mtd: nand: omap: Copy platform data parameters to omap_nand_info data
> mtd: nand: omap: Clean up device tree support
> mtd: nand: omap: Update DT binding documentation
> memory: omap-gpmc: Prevent mapping into 1st 16MB
> memory: omap-gpmc: Move device tree binding to correct location
> memory: omap-gpmc: Support general purpose input for WAITPINs
> memory: omap-gpmc: Reserve WAITPIN if needed for WAIT monitoring
> memory: omap-gpmc: Support WAIT pin edge interrupts
> memory: omap-gpmc: Prevent GPMC_STATUS from being accessed via
> gpmc_regs
> mtd: nand: omap2: Implement NAND ready using gpiolib
> ARM: dts: dra7: Fix NAND device nodes.
> ARM: dts: dra7x-evm: Provide NAND ready pin
> ARM: dts: am437x: Fix NAND device nodes
> ARM: dts: am437x: Provide NAND ready pin
> ARM: dts: am335x: Fix NAND device nodes
> ARM: dts: am335x: Provide NAND ready pin
> ARM: dts: dm814x: Fix gpmc and NAND node
> ARM: dts: dm816x: Fix gpmc and NAND node
> ARM: dts: omap3: Fix gpmc and NAND nodes
>
> Documentation/devicetree/bindings/bus/ti-gpmc.txt | 130 ----
> .../bindings/memory-controllers/omap-gpmc.txt | 141 +++++
> .../devicetree/bindings/mtd/gpmc-nand.txt | 19 +-
> arch/arm/boot/dts/am335x-baltos-ir5221.dts | 10 +-
> arch/arm/boot/dts/am335x-chilisom.dtsi | 9 +-
> arch/arm/boot/dts/am335x-cm-t335.dts | 10 +-
> arch/arm/boot/dts/am335x-evm.dts | 8 +-
> arch/arm/boot/dts/am335x-igep0033.dtsi | 9 +-
> arch/arm/boot/dts/am335x-phycore-som.dtsi | 9 +-
> arch/arm/boot/dts/am33xx.dtsi | 4 +
> arch/arm/boot/dts/am4372.dtsi | 4 +
> arch/arm/boot/dts/am437x-cm-t43.dts | 7 +-
> arch/arm/boot/dts/am437x-gp-evm.dts | 9 +-
> arch/arm/boot/dts/am43x-epos-evm.dts | 9 +-
> arch/arm/boot/dts/dm8148-evm.dts | 8 +-
> arch/arm/boot/dts/dm814x.dtsi | 4 +
> arch/arm/boot/dts/dm8168-evm.dts | 8 +-
> arch/arm/boot/dts/dm816x.dtsi | 4 +
> arch/arm/boot/dts/dra62x-j5eco-evm.dts | 8 +-
> arch/arm/boot/dts/dra7-evm.dts | 7 +-
> arch/arm/boot/dts/dra7.dtsi | 4 +
> arch/arm/boot/dts/dra72-evm.dts | 7 +-
> arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts | 3 +-
> arch/arm/boot/dts/logicpd-torpedo-som.dtsi | 8 +-
> arch/arm/boot/dts/omap3-beagle.dts | 5 +-
> arch/arm/boot/dts/omap3-cm-t3x.dtsi | 6 +-
> arch/arm/boot/dts/omap3-devkit8000-common.dtsi | 4 +
> arch/arm/boot/dts/omap3-evm-37xx.dts | 8 +-
> arch/arm/boot/dts/omap3-gta04.dtsi | 4 +
> arch/arm/boot/dts/omap3-igep.dtsi | 6 +-
> arch/arm/boot/dts/omap3-igep0020-common.dtsi | 4 +-
> arch/arm/boot/dts/omap3-igep0030-common.dtsi | 4 +
> arch/arm/boot/dts/omap3-ldp.dts | 10 +-
> arch/arm/boot/dts/omap3-lilly-a83x.dtsi | 6 +-
> arch/arm/boot/dts/omap3-overo-base.dtsi | 6 +-
> arch/arm/boot/dts/omap3-pandora-common.dtsi | 4 +
> arch/arm/boot/dts/omap3-tao3530.dtsi | 6 +-
> arch/arm/boot/dts/omap3.dtsi | 4 +
> arch/arm/boot/dts/omap3430-sdp.dts | 6 +-
> arch/arm/mach-omap2/gpmc-nand.c | 7 +-
> drivers/memory/Kconfig | 1 +
> drivers/memory/omap-gpmc.c | 653 +++++++++++++--------
> drivers/mtd/nand/omap2.c | 193 ++++--
> include/linux/omap-gpmc.h | 177 ++----
> include/linux/platform_data/gpmc-omap.h | 167 ++++++
> include/linux/platform_data/mtd-nand-omap2.h | 12 +-
> 46 files changed, 1121 insertions(+), 611 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/bus/ti-gpmc.txt
> create mode 100644 Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
> create mode 100644 include/linux/platform_data/gpmc-omap.h
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-02-29 16:26 UTC|newest]
Thread overview: 106+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-19 21:15 [PATCH v5 00/26] memory: omap-gpmc: mtd: nand: Support GPMC NAND on non-OMAP platforms Roger Quadros
2016-02-19 21:15 ` Roger Quadros
2016-02-19 21:15 ` [PATCH v5 01/26] ARM: OMAP2+: gpmc: Add platform data Roger Quadros
2016-02-19 21:15 ` Roger Quadros
2016-02-19 21:15 ` [PATCH v5 02/26] ARM: OMAP2+: gpmc: Add gpmc timings and settings to " Roger Quadros
2016-02-19 21:15 ` Roger Quadros
2016-02-19 21:15 ` [PATCH v5 03/26] memory: omap-gpmc: Introduce GPMC to NAND interface Roger Quadros
2016-02-19 21:15 ` Roger Quadros
2016-03-05 1:35 ` Brian Norris
2016-03-07 8:55 ` Roger Quadros
2016-03-07 8:55 ` Roger Quadros
2016-02-19 21:15 ` [PATCH v5 04/26] mtd: nand: omap2: Use gpmc_omap_get_nand_ops() to get NAND registers Roger Quadros
2016-02-19 21:15 ` Roger Quadros
2016-02-19 21:15 ` [PATCH v5 05/26] memory: omap-gpmc: Add GPMC-NAND ops to get writebufferempty status Roger Quadros
2016-02-19 21:15 ` Roger Quadros
2016-02-19 21:15 ` [PATCH v5 06/26] mtd: nand: omap2: Switch to using GPMC-NAND ops for writebuffer empty check Roger Quadros
2016-02-19 21:15 ` Roger Quadros
2016-02-19 21:15 ` [PATCH v5 07/26] memory: omap-gpmc: Implement IRQ domain for NAND IRQs Roger Quadros
2016-02-19 21:15 ` Roger Quadros
2016-02-19 21:15 ` [PATCH v5 08/26] mtd: nand: omap: Copy platform data parameters to omap_nand_info data Roger Quadros
2016-02-19 21:15 ` Roger Quadros
2016-02-19 21:15 ` [PATCH v5 09/26] mtd: nand: omap: Clean up device tree support Roger Quadros
2016-02-19 21:15 ` Roger Quadros
2016-03-05 2:10 ` Brian Norris
2016-03-07 9:06 ` Roger Quadros
2016-03-07 9:06 ` Roger Quadros
2016-03-05 2:28 ` Brian Norris
2016-03-05 2:28 ` Brian Norris
2016-03-07 9:02 ` Roger Quadros
2016-03-07 9:02 ` Roger Quadros
2016-02-19 21:15 ` [PATCH v5 10/26] mtd: nand: omap: Update DT binding documentation Roger Quadros
2016-02-19 21:15 ` Roger Quadros
2016-02-23 19:41 ` Rob Herring
2016-02-24 9:55 ` Roger Quadros
2016-02-24 9:55 ` Roger Quadros
2016-03-05 2:04 ` Brian Norris
2016-03-05 2:04 ` Brian Norris
2016-03-07 9:46 ` Roger Quadros
2016-03-07 9:46 ` Roger Quadros
2016-03-07 18:58 ` Brian Norris
2016-03-07 18:58 ` Brian Norris
2016-03-07 10:32 ` [PATCH v6 " Roger Quadros
2016-03-07 10:32 ` Roger Quadros
2016-03-17 14:48 ` Rob Herring
2016-03-17 14:48 ` Rob Herring
2016-02-19 21:15 ` [PATCH v5 11/26] memory: omap-gpmc: Prevent mapping into 1st 16MB Roger Quadros
2016-02-19 21:15 ` Roger Quadros
2016-02-19 21:15 ` [PATCH v5 12/26] memory: omap-gpmc: Move device tree binding to correct location Roger Quadros
2016-02-19 21:15 ` Roger Quadros
2016-02-23 20:50 ` Rob Herring
2016-02-24 9:51 ` Roger Quadros
2016-02-24 9:51 ` Roger Quadros
2016-02-19 21:15 ` [PATCH v5 13/26] memory: omap-gpmc: Support general purpose input for WAITPINs Roger Quadros
2016-02-19 21:15 ` Roger Quadros
2016-03-07 9:34 ` Boris Brezillon
2016-03-07 9:34 ` Boris Brezillon
2016-03-07 9:38 ` Boris Brezillon
2016-03-07 9:38 ` Boris Brezillon
2016-03-07 10:02 ` Roger Quadros
2016-03-07 10:02 ` Roger Quadros
2016-03-07 10:31 ` Boris Brezillon
2016-03-07 10:31 ` Boris Brezillon
2016-02-19 21:15 ` [PATCH v5 14/26] memory: omap-gpmc: Reserve WAITPIN if needed for WAIT monitoring Roger Quadros
2016-02-19 21:15 ` Roger Quadros
2016-02-19 21:15 ` [PATCH v5 15/26] memory: omap-gpmc: Support WAIT pin edge interrupts Roger Quadros
2016-02-19 21:15 ` Roger Quadros
2016-02-19 21:15 ` [PATCH v5 16/26] memory: omap-gpmc: Prevent GPMC_STATUS from being accessed via gpmc_regs Roger Quadros
2016-02-19 21:15 ` Roger Quadros
2016-02-19 21:15 ` [PATCH v5 17/26] mtd: nand: omap2: Implement NAND ready using gpiolib Roger Quadros
2016-02-19 21:15 ` Roger Quadros
2016-03-05 1:46 ` Brian Norris
2016-03-05 1:46 ` Brian Norris
2016-03-07 9:11 ` Roger Quadros
2016-03-07 9:11 ` Roger Quadros
2016-03-07 9:22 ` Boris Brezillon
2016-03-07 9:22 ` Boris Brezillon
2016-02-19 21:15 ` [PATCH v5 18/26] ARM: dts: dra7: Fix NAND device nodes Roger Quadros
2016-02-19 21:15 ` Roger Quadros
2016-02-19 21:15 ` [PATCH v5 19/26] ARM: dts: dra7x-evm: Provide NAND ready pin Roger Quadros
2016-02-19 21:15 ` Roger Quadros
2016-02-19 21:15 ` [PATCH v5 20/26] ARM: dts: am437x: Fix NAND device nodes Roger Quadros
2016-02-19 21:15 ` Roger Quadros
2016-02-19 21:15 ` [PATCH v5 21/26] ARM: dts: am437x: Provide NAND ready pin Roger Quadros
2016-02-19 21:15 ` Roger Quadros
2016-02-19 21:15 ` [PATCH v5 22/26] ARM: dts: am335x: Fix NAND device nodes Roger Quadros
2016-02-19 21:15 ` Roger Quadros
2016-02-19 21:15 ` [PATCH v5 23/26] ARM: dts: am335x: Provide NAND ready pin Roger Quadros
2016-02-19 21:15 ` Roger Quadros
2016-02-19 21:15 ` [PATCH v5 24/26] ARM: dts: dm814x: Fix gpmc and NAND node Roger Quadros
2016-02-19 21:15 ` Roger Quadros
2016-02-19 21:15 ` [PATCH v5 25/26] ARM: dts: dm816x: " Roger Quadros
2016-02-19 21:15 ` Roger Quadros
2016-02-19 21:15 ` [PATCH v5 26/26] ARM: dts: omap3: Fix gpmc and NAND nodes Roger Quadros
2016-02-19 21:15 ` Roger Quadros
2016-02-19 22:04 ` [PATCH v5 00/26] memory: omap-gpmc: mtd: nand: Support GPMC NAND on non-OMAP platforms Tony Lindgren
2016-02-22 10:15 ` Roger Quadros
2016-02-22 10:15 ` Roger Quadros
2016-02-22 16:42 ` Tony Lindgren
2016-02-22 20:05 ` Roger Quadros
2016-02-22 20:05 ` Roger Quadros
2016-02-22 20:12 ` nick
2016-02-22 20:12 ` nick
2016-02-29 16:25 ` Roger Quadros [this message]
2016-02-29 16:25 ` Roger Quadros
2016-03-05 2:33 ` Brian Norris
2016-03-05 2:33 ` Brian Norris
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56D470E8.4070106@ti.com \
--to=rogerq@ti.com \
--cc=computersforpeace@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=dwmw2@infradead.org \
--cc=ezequiel@vanguardiasur.com.ar \
--cc=fcooper@ti.com \
--cc=javier@dowhile0.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=nsekhar@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.