From: sergei.shtylyov@cogentembedded.com (Sergei Shtylyov)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 06/11] phy: da8xx-usb: new driver for DA8XX SoC USB PHY
Date: Thu, 17 Mar 2016 15:38:57 +0300 [thread overview]
Message-ID: <56EAA561.8010408@cogentembedded.com> (raw)
In-Reply-To: <1458181615-27782-7-git-send-email-david@lechnology.com>
On 3/17/2016 5:26 AM, David Lechner wrote:
> This is a new phy driver for the SoC USB controllers on the TI DA8XX
DA8xx, please.
> family of microcontrollers. The USB 1.1 PHY is just a simple on/off.
> The USB 2.0 PHY also allows overriding the VBUS and ID pins.
>
> Signed-off-by: David Lechner <david@lechnology.com>
[...]
> diff --git a/drivers/phy/phy-da8xx-usb.c b/drivers/phy/phy-da8xx-usb.c
> new file mode 100644
> index 0000000..93a5f4d
> --- /dev/null
> +++ b/drivers/phy/phy-da8xx-usb.c
> @@ -0,0 +1,295 @@
[...]
> +static inline u32 da8xx_usbphy_readl(void __iomem *base)
> +{
> + return readl(base);
> +}
> +
> +static inline void da8xx_usbphy_writel(void __iomem *base, u32 value)
> +{
> + writel(value, base);
Why wrap them at all?
> +}
> +
> +static int da8xx_usb11_phy_init(struct phy *phy)
> +{
> + struct da8xx_usbphy *d_phy = phy_get_drvdata(phy);
> + int ret;
> + u32 val;
> +
> + ret = clk_prepare_enable(d_phy->usb11_clk);
> + if (ret)
> + return ret;
> +
> + val = da8xx_usbphy_readl(d_phy->phy_ctrl);
> + val |= USB1SUSPENDM;
> + da8xx_usbphy_writel(d_phy->phy_ctrl, val);
Hum, I'd think this needs to be done in the power_on() method...
> +
> + return 0;
> +}
> +
> +static int da8xx_usb11_phy_shutdown(struct phy *phy)
> +{
> + struct da8xx_usbphy *d_phy = phy_get_drvdata(phy);
> + u32 val;
> +
> + val = da8xx_usbphy_readl(d_phy->phy_ctrl);
> + val &= ~USB1SUSPENDM;
> + da8xx_usbphy_writel(d_phy->phy_ctrl, val);
And this in power_off()...
> +
> + clk_disable_unprepare(d_phy->usb11_clk);
> +
> + return 0;
> +}
> +
> +static const struct phy_ops da8xx_usb11_phy_ops = {
> + .power_on = da8xx_usb11_phy_init,
> + .power_off = da8xx_usb11_phy_shutdown,
Aha, it's just that the names don't match...
Please call the implementations da8xx_usb11_phy_power_{on|off}().
The same with USB 2.0 PHY.
[...]
Looks good otherwise on my superficial review. :-)
MBR, Sergei
WARNING: multiple messages have this Message-ID (diff)
From: Sergei Shtylyov <sergei.shtylyov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
To: David Lechner <david-nq/r/kbU++upp/zk7JDF2g@public.gmane.org>
Cc: "Petr Kulhavy" <petr-Qh/3xLP0EvwAvxtiuMwx3w@public.gmane.org>,
"Rob Herring" <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
"Pawel Moll" <pawel.moll-5wv7dgnIgG8@public.gmane.org>,
"Mark Rutland" <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
"Ian Campbell"
<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
"Kumar Gala" <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
"Russell King" <linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>,
"Sekhar Nori" <nsekhar-l0cyMroinI0@public.gmane.org>,
"Kevin Hilman" <khilman-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
"Kishon Vijay Abraham I" <kishon-l0cyMroinI0@public.gmane.org>,
"Alan Stern"
<stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz@public.gmane.org>,
"Greg Kroah-Hartman"
<gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org>,
"Bin Liu" <b-liu-l0cyMroinI0@public.gmane.org>,
"Andreas Färber" <afaerber-l3A5Bk7waGM@public.gmane.org>,
"Tony Lindgren" <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>,
"Robert Jarzmik" <robert.jarzmik-GANU6spQydw@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH v2 06/11] phy: da8xx-usb: new driver for DA8XX SoC USB PHY
Date: Thu, 17 Mar 2016 15:38:57 +0300 [thread overview]
Message-ID: <56EAA561.8010408@cogentembedded.com> (raw)
In-Reply-To: <1458181615-27782-7-git-send-email-david-nq/r/kbU++upp/zk7JDF2g@public.gmane.org>
On 3/17/2016 5:26 AM, David Lechner wrote:
> This is a new phy driver for the SoC USB controllers on the TI DA8XX
DA8xx, please.
> family of microcontrollers. The USB 1.1 PHY is just a simple on/off.
> The USB 2.0 PHY also allows overriding the VBUS and ID pins.
>
> Signed-off-by: David Lechner <david-nq/r/kbU++upp/zk7JDF2g@public.gmane.org>
[...]
> diff --git a/drivers/phy/phy-da8xx-usb.c b/drivers/phy/phy-da8xx-usb.c
> new file mode 100644
> index 0000000..93a5f4d
> --- /dev/null
> +++ b/drivers/phy/phy-da8xx-usb.c
> @@ -0,0 +1,295 @@
[...]
> +static inline u32 da8xx_usbphy_readl(void __iomem *base)
> +{
> + return readl(base);
> +}
> +
> +static inline void da8xx_usbphy_writel(void __iomem *base, u32 value)
> +{
> + writel(value, base);
Why wrap them at all?
> +}
> +
> +static int da8xx_usb11_phy_init(struct phy *phy)
> +{
> + struct da8xx_usbphy *d_phy = phy_get_drvdata(phy);
> + int ret;
> + u32 val;
> +
> + ret = clk_prepare_enable(d_phy->usb11_clk);
> + if (ret)
> + return ret;
> +
> + val = da8xx_usbphy_readl(d_phy->phy_ctrl);
> + val |= USB1SUSPENDM;
> + da8xx_usbphy_writel(d_phy->phy_ctrl, val);
Hum, I'd think this needs to be done in the power_on() method...
> +
> + return 0;
> +}
> +
> +static int da8xx_usb11_phy_shutdown(struct phy *phy)
> +{
> + struct da8xx_usbphy *d_phy = phy_get_drvdata(phy);
> + u32 val;
> +
> + val = da8xx_usbphy_readl(d_phy->phy_ctrl);
> + val &= ~USB1SUSPENDM;
> + da8xx_usbphy_writel(d_phy->phy_ctrl, val);
And this in power_off()...
> +
> + clk_disable_unprepare(d_phy->usb11_clk);
> +
> + return 0;
> +}
> +
> +static const struct phy_ops da8xx_usb11_phy_ops = {
> + .power_on = da8xx_usb11_phy_init,
> + .power_off = da8xx_usb11_phy_shutdown,
Aha, it's just that the names don't match...
Please call the implementations da8xx_usb11_phy_power_{on|off}().
The same with USB 2.0 PHY.
[...]
Looks good otherwise on my superficial review. :-)
MBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
To: David Lechner <david@lechnology.com>
Cc: "Petr Kulhavy" <petr@barix.com>,
"Rob Herring" <robh+dt@kernel.org>,
"Pawel Moll" <pawel.moll@arm.com>,
"Mark Rutland" <mark.rutland@arm.com>,
"Ian Campbell" <ijc+devicetree@hellion.org.uk>,
"Kumar Gala" <galak@codeaurora.org>,
"Russell King" <linux@arm.linux.org.uk>,
"Sekhar Nori" <nsekhar@ti.com>,
"Kevin Hilman" <khilman@kernel.org>,
"Kishon Vijay Abraham I" <kishon@ti.com>,
"Alan Stern" <stern@rowland.harvard.edu>,
"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
"Bin Liu" <b-liu@ti.com>, "Andreas Färber" <afaerber@suse.de>,
"Tony Lindgren" <tony@atomide.com>,
"Robert Jarzmik" <robert.jarzmik@free.fr>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-usb@vger.kernel.org
Subject: Re: [PATCH v2 06/11] phy: da8xx-usb: new driver for DA8XX SoC USB PHY
Date: Thu, 17 Mar 2016 15:38:57 +0300 [thread overview]
Message-ID: <56EAA561.8010408@cogentembedded.com> (raw)
In-Reply-To: <1458181615-27782-7-git-send-email-david@lechnology.com>
On 3/17/2016 5:26 AM, David Lechner wrote:
> This is a new phy driver for the SoC USB controllers on the TI DA8XX
DA8xx, please.
> family of microcontrollers. The USB 1.1 PHY is just a simple on/off.
> The USB 2.0 PHY also allows overriding the VBUS and ID pins.
>
> Signed-off-by: David Lechner <david@lechnology.com>
[...]
> diff --git a/drivers/phy/phy-da8xx-usb.c b/drivers/phy/phy-da8xx-usb.c
> new file mode 100644
> index 0000000..93a5f4d
> --- /dev/null
> +++ b/drivers/phy/phy-da8xx-usb.c
> @@ -0,0 +1,295 @@
[...]
> +static inline u32 da8xx_usbphy_readl(void __iomem *base)
> +{
> + return readl(base);
> +}
> +
> +static inline void da8xx_usbphy_writel(void __iomem *base, u32 value)
> +{
> + writel(value, base);
Why wrap them at all?
> +}
> +
> +static int da8xx_usb11_phy_init(struct phy *phy)
> +{
> + struct da8xx_usbphy *d_phy = phy_get_drvdata(phy);
> + int ret;
> + u32 val;
> +
> + ret = clk_prepare_enable(d_phy->usb11_clk);
> + if (ret)
> + return ret;
> +
> + val = da8xx_usbphy_readl(d_phy->phy_ctrl);
> + val |= USB1SUSPENDM;
> + da8xx_usbphy_writel(d_phy->phy_ctrl, val);
Hum, I'd think this needs to be done in the power_on() method...
> +
> + return 0;
> +}
> +
> +static int da8xx_usb11_phy_shutdown(struct phy *phy)
> +{
> + struct da8xx_usbphy *d_phy = phy_get_drvdata(phy);
> + u32 val;
> +
> + val = da8xx_usbphy_readl(d_phy->phy_ctrl);
> + val &= ~USB1SUSPENDM;
> + da8xx_usbphy_writel(d_phy->phy_ctrl, val);
And this in power_off()...
> +
> + clk_disable_unprepare(d_phy->usb11_clk);
> +
> + return 0;
> +}
> +
> +static const struct phy_ops da8xx_usb11_phy_ops = {
> + .power_on = da8xx_usb11_phy_init,
> + .power_off = da8xx_usb11_phy_shutdown,
Aha, it's just that the names don't match...
Please call the implementations da8xx_usb11_phy_power_{on|off}().
The same with USB 2.0 PHY.
[...]
Looks good otherwise on my superficial review. :-)
MBR, Sergei
next prev parent reply other threads:[~2016-03-17 12:38 UTC|newest]
Thread overview: 120+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-17 2:26 [PATCH v2 00/11] da8xx USB clocks David Lechner
2016-03-17 2:26 ` David Lechner
2016-03-17 2:26 ` David Lechner
2016-03-17 2:26 ` [PATCH v2 01/11] ARM: davinci: defined missing CFGCHIP2_REFFREQ_* macros for MUSB PHY David Lechner
2016-03-17 2:26 ` David Lechner
2016-03-17 2:26 ` David Lechner
2016-03-17 2:26 ` [PATCH v2 02/11] ARM: davinci: add set_parent callback for mux clocks David Lechner
2016-03-17 2:26 ` David Lechner
2016-03-17 2:26 ` David Lechner
2016-03-17 2:26 ` [PATCH v2 03/11] ARM: davinci: da850: use clk->set_parent for async3 David Lechner
2016-03-17 2:26 ` David Lechner
2016-03-17 2:26 ` David Lechner
2016-03-23 15:56 ` Sekhar Nori
2016-03-23 15:56 ` Sekhar Nori
2016-03-23 15:56 ` Sekhar Nori
2016-03-23 17:20 ` David Lechner
2016-03-23 17:20 ` David Lechner
2016-03-23 17:20 ` David Lechner
2016-03-23 17:29 ` Sekhar Nori
2016-03-23 17:29 ` Sekhar Nori
2016-03-23 18:32 ` David Lechner
2016-03-23 18:32 ` David Lechner
2016-03-24 13:44 ` Sekhar Nori
2016-03-24 13:44 ` Sekhar Nori
2016-03-17 2:26 ` [PATCH v2 04/11] ARM: davinci: da8xx: add usb phy clocks David Lechner
2016-03-17 2:26 ` David Lechner
2016-03-17 2:26 ` David Lechner
2016-03-17 12:12 ` Sergei Shtylyov
2016-03-17 12:12 ` Sergei Shtylyov
2016-03-23 16:56 ` Sekhar Nori
2016-03-23 16:56 ` Sekhar Nori
2016-03-23 16:56 ` Sekhar Nori
2016-03-23 17:45 ` David Lechner
2016-03-23 17:45 ` David Lechner
2016-03-23 17:45 ` David Lechner
2016-03-23 17:54 ` Sekhar Nori
2016-03-23 17:54 ` Sekhar Nori
2016-03-23 17:54 ` Sekhar Nori
2016-03-17 2:26 ` [PATCH v2 05/11] dt-bindings: Add bindings for phy-da8xx-usb David Lechner
2016-03-17 2:26 ` David Lechner
2016-03-17 2:26 ` David Lechner
2016-03-19 23:56 ` Rob Herring
2016-03-19 23:56 ` Rob Herring
2016-03-19 23:56 ` Rob Herring
2016-03-23 17:06 ` Sekhar Nori
2016-03-23 17:06 ` Sekhar Nori
2016-03-23 17:06 ` Sekhar Nori
2016-03-23 17:56 ` David Lechner
2016-03-23 17:56 ` David Lechner
2016-03-23 17:56 ` David Lechner
2016-03-17 2:26 ` [PATCH v2 06/11] phy: da8xx-usb: new driver for DA8XX SoC USB PHY David Lechner
2016-03-17 2:26 ` David Lechner
2016-03-17 2:26 ` David Lechner
2016-03-17 12:38 ` Sergei Shtylyov [this message]
2016-03-17 12:38 ` Sergei Shtylyov
2016-03-17 12:38 ` Sergei Shtylyov
2016-03-23 17:21 ` Sekhar Nori
2016-03-23 17:21 ` Sekhar Nori
2016-03-23 18:06 ` David Lechner
2016-03-23 18:06 ` David Lechner
2016-03-23 18:06 ` David Lechner
2016-03-24 14:01 ` David Laight
2016-03-24 14:01 ` David Laight
2016-03-24 14:01 ` David Laight
2016-04-01 13:16 ` Kishon Vijay Abraham I
2016-04-01 13:16 ` Kishon Vijay Abraham I
2016-04-01 14:45 ` Bin Liu
2016-04-01 14:45 ` Bin Liu
2016-04-01 14:45 ` Bin Liu
2016-04-01 16:02 ` David Lechner
2016-04-01 16:02 ` David Lechner
2016-04-01 16:02 ` David Lechner
2016-04-01 16:19 ` Bin Liu
2016-04-01 16:19 ` Bin Liu
2016-04-01 16:19 ` Bin Liu
2016-04-01 19:49 ` Sergei Shtylyov
2016-04-01 19:49 ` Sergei Shtylyov
2016-04-01 19:49 ` Sergei Shtylyov
2016-04-01 19:45 ` Sergei Shtylyov
2016-04-01 19:45 ` Sergei Shtylyov
2016-04-01 19:56 ` Bin Liu
2016-04-01 19:56 ` Bin Liu
2016-04-01 19:56 ` Bin Liu
2016-04-13 20:51 ` David Lechner
2016-04-13 20:51 ` David Lechner
2016-04-14 12:32 ` Kishon Vijay Abraham I
2016-04-14 12:32 ` Kishon Vijay Abraham I
2016-03-17 2:26 ` [PATCH v2 07/11] ARM: davinci: da8xx: Add USB PHY platform declaration David Lechner
2016-03-17 2:26 ` David Lechner
2016-03-17 2:26 ` David Lechner
2016-03-17 2:26 ` [PATCH v2 08/11] ARM: dt: da850: Add usb phy node David Lechner
2016-03-17 2:26 ` David Lechner
2016-03-17 2:26 ` David Lechner
2016-03-17 2:26 ` [PATCH v2 09/11] usb: ohci-da8xx: Remove code that references mach David Lechner
2016-03-17 2:26 ` David Lechner
2016-03-17 2:26 ` David Lechner
2016-03-17 12:53 ` Sergei Shtylyov
2016-03-17 12:53 ` Sergei Shtylyov
2016-03-17 12:53 ` Sergei Shtylyov
2016-03-17 18:01 ` Alan Stern
2016-03-17 2:26 ` [PATCH v2 10/11] usb: musb: da8xx: Use devm in probe David Lechner
2016-03-17 2:26 ` David Lechner
2016-03-17 2:26 ` David Lechner
2016-03-17 11:07 ` Sergei Shtylyov
2016-03-17 11:07 ` Sergei Shtylyov
2016-03-17 11:07 ` Sergei Shtylyov
2016-03-17 2:26 ` [PATCH v2 11/11] usb: musb: da8xx: Remove mach code David Lechner
2016-03-17 2:26 ` David Lechner
2016-03-17 2:26 ` David Lechner
2016-03-17 13:11 ` Sergei Shtylyov
2016-03-17 13:11 ` Sergei Shtylyov
2016-03-17 13:11 ` Sergei Shtylyov
2016-03-17 17:38 ` David Lechner
2016-03-17 17:38 ` David Lechner
2016-03-17 17:38 ` David Lechner
2016-03-17 13:39 ` [PATCH v2 00/11] da8xx USB clocks Sergei Shtylyov
2016-03-17 13:39 ` Sergei Shtylyov
2016-03-17 13:39 ` Sergei Shtylyov
2016-03-23 17:26 ` Sekhar Nori
2016-03-23 17:26 ` Sekhar Nori
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56EAA561.8010408@cogentembedded.com \
--to=sergei.shtylyov@cogentembedded.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.