[PATCH v3 01/16] dt: davinci: use proper address after @

[sergei.shtylyov@cogentembedded.com (Sergei Shtylyov)]

Hello.

On 03/25/2016 06:13 PM, Rob Herring wrote:

>>> TI has been using the physical address in DT after the @ in device nodes.
>>> The device tree convention is to use the same address that is used for
>>> the reg property. This updates all davinci DT files to use the proper
>>> convention.
>>>
>>> Signed-off-by: David Lechner <david@lechnology.com>
>>
>> [...]
>>
>>> diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
>>> index 226cda7..4294849 100644
>>> --- a/arch/arm/boot/dts/da850.dtsi
>>> +++ b/arch/arm/boot/dts/da850.dtsi
>>> @@ -15,7 +15,7 @@
>>>                  #address-cells = <1>;
>>>                  #size-cells = <1>;
>>>                  ranges;
>>> -               intc: interrupt-controller {
>>> +               intc: interrupt-controller at fffee000 {
>>>                          compatible = "ti,cp-intc";
>>>                          interrupt-controller;
>>>                          #interrupt-cells = <1>;
>>> @@ -23,7 +23,7 @@
>>>                          reg = <0xfffee000 0x2000>;
>>>                  };
>>>          };
>>> -       soc {
>>> +       soc at 1c00000 {
>>
>>
>>     This node doesn't have the "reg" prop.

> But probably has a ranges property which is correct.

    Yes, it does. Didn't know that "ranges" can be used that way, thanks...

> Rob

MBR, Sergei