All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dan Murphy <dmurphy@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [uboot] [PATCH v5 3/7] net: phy: dp83867: Add device tree bindings and documentation
Date: Wed, 13 Apr 2016 08:37:20 -0500	[thread overview]
Message-ID: <570E4B90.3080405@ti.com> (raw)
In-Reply-To: <1460377108-19262-3-git-send-email-dmurphy@ti.com>

Adding Joe

On 04/11/2016 07:18 AM, Dan Murphy wrote:
> Add the device tree bindings and the accompanying documentation
> for the TI DP83867 Giga bit ethernet phy driver.
>
> The original document was from:
>     [commit 2a10154abcb75ad0d7b6bfea6210ac743ec60897 from the Linux kernel]
>
> Signed-off-by: Dan Murphy <dmurphy@ti.com>
> ---
>
> v5 - Removed /t between define and variable - https://patchwork.ozlabs.org/patch/608085/
>
>  doc/device-tree-bindings/net/ti,dp83867.txt | 25 +++++++++++++++++++++
>  include/dt-bindings/net/ti-dp83867.h        | 35 +++++++++++++++++++++++++++++
>  2 files changed, 60 insertions(+)
>  create mode 100644 doc/device-tree-bindings/net/ti,dp83867.txt
>  create mode 100644 include/dt-bindings/net/ti-dp83867.h
>
> diff --git a/doc/device-tree-bindings/net/ti,dp83867.txt b/doc/device-tree-bindings/net/ti,dp83867.txt
> new file mode 100644
> index 0000000..cb77fdf
> --- /dev/null
> +++ b/doc/device-tree-bindings/net/ti,dp83867.txt
> @@ -0,0 +1,25 @@
> +* Texas Instruments - dp83867 Giga bit ethernet phy
> +
> +Required properties:
> +	- reg - The ID number for the phy, usually a small integer
> +	- ti,rx-internal-delay - RGMII Recieve Clock Delay - see dt-bindings/net/ti-dp83867.h
> +		for applicable values
> +	- ti,tx-internal-delay - RGMII Transmit Clock Delay - see dt-bindings/net/ti-dp83867.h
> +		for applicable values
> +	- ti,fifo-depth - Transmitt FIFO depth- see dt-bindings/net/ti-dp83867.h
> +		for applicable values
> +
> +Default child nodes are standard Ethernet PHY device
> +nodes as described in doc/devicetree/bindings/net/ethernet.txt
> +
> +Example:
> +
> +	ethernet-phy at 0 {
> +		reg = <0>;
> +		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
> +		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>;
> +		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
> +	};
> +
> +Datasheet can be found:
> +http://www.ti.com/product/DP83867IR/datasheet
> diff --git a/include/dt-bindings/net/ti-dp83867.h b/include/dt-bindings/net/ti-dp83867.h
> new file mode 100644
> index 0000000..1843757
> --- /dev/null
> +++ b/include/dt-bindings/net/ti-dp83867.h
> @@ -0,0 +1,35 @@
> +/*
> + * TI DP83867 PHY drivers
> + *
> + * SPDX-License-Identifier:	GPL-2.0
> + *
> + */
> +
> +#ifndef _DT_BINDINGS_TI_DP83867_H
> +#define _DT_BINDINGS_TI_DP83867_H
> +
> +/* PHY CTRL bits */
> +#define DP83867_PHYCR_FIFO_DEPTH_3_B_NIB	0x00
> +#define DP83867_PHYCR_FIFO_DEPTH_4_B_NIB	0x01
> +#define DP83867_PHYCR_FIFO_DEPTH_6_B_NIB	0x02
> +#define DP83867_PHYCR_FIFO_DEPTH_8_B_NIB	0x03
> +
> +/* RGMIIDCTL internal delay for rx and tx */
> +#define DP83867_RGMIIDCTL_250_PS	0x0
> +#define DP83867_RGMIIDCTL_500_PS	0x1
> +#define DP83867_RGMIIDCTL_750_PS	0x2
> +#define DP83867_RGMIIDCTL_1_NS		0x3
> +#define DP83867_RGMIIDCTL_1_25_NS	0x4
> +#define DP83867_RGMIIDCTL_1_50_NS	0x5
> +#define DP83867_RGMIIDCTL_1_75_NS	0x6
> +#define DP83867_RGMIIDCTL_2_00_NS	0x7
> +#define DP83867_RGMIIDCTL_2_25_NS	0x8
> +#define DP83867_RGMIIDCTL_2_50_NS	0x9
> +#define DP83867_RGMIIDCTL_2_75_NS	0xa
> +#define DP83867_RGMIIDCTL_3_00_NS	0xb
> +#define DP83867_RGMIIDCTL_3_25_NS	0xc
> +#define DP83867_RGMIIDCTL_3_50_NS	0xd
> +#define DP83867_RGMIIDCTL_3_75_NS	0xe
> +#define DP83867_RGMIIDCTL_4_00_NS	0xf
> +
> +#endif


-- 
------------------
Dan Murphy

  reply	other threads:[~2016-04-13 13:37 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-04-11 12:18 [U-Boot] [uboot] [PATCH v5 1/7] drivers: net: cpsw: Add reading of DT phy-handle node Dan Murphy
2016-04-11 12:18 ` [U-Boot] [uboot] [PATCH v5 2/7] net: zynq_gem: Add the passing of the " Dan Murphy
2016-04-11 13:05   ` Michal Simek
2016-04-13 13:37   ` Dan Murphy
2016-04-11 12:18 ` [U-Boot] [uboot] [PATCH v5 3/7] net: phy: dp83867: Add device tree bindings and documentation Dan Murphy
2016-04-13 13:37   ` Dan Murphy [this message]
2016-04-11 12:18 ` [U-Boot] [uboot] [PATCH v5 4/7] net: phy: ti: Allow the driver to be more configurable Dan Murphy
2016-04-11 13:06   ` Michal Simek
2016-04-13 13:37   ` Dan Murphy
2016-04-15 11:07   ` Mugunthan V N
2016-04-11 12:18 ` [U-Boot] [uboot] [PATCH v5 5/7] net: phy: Move is_rgmii helper to phy.h Dan Murphy
2016-04-11 13:06   ` Michal Simek
2016-04-13 13:37   ` Dan Murphy
2016-04-11 12:18 ` [U-Boot] [uboot] [PATCH v5 6/7] net: phy: Add phy_interface_is_sgmii " Dan Murphy
2016-04-13 13:38   ` Dan Murphy
2016-04-11 12:18 ` [U-Boot] [uboot] [PATCH v5 7/7] net: phy: dp83867: Add SGMII helper for configuration Dan Murphy
2016-04-13 13:38   ` Dan Murphy
2016-04-13 13:36 ` [U-Boot] [uboot] [PATCH v5 1/7] drivers: net: cpsw: Add reading of DT phy-handle node Dan Murphy
2016-04-15 10:53 ` Mugunthan V N
2016-04-15 11:03 ` Mugunthan V N

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=570E4B90.3080405@ti.com \
    --to=dmurphy@ti.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.