* [PATCH] ARM: dts: exynos: Add TMU nodes regulator supply for Peach boards
@ 2016-05-31 21:48 ` Javier Martinez Canillas
0 siblings, 0 replies; 7+ messages in thread
From: Javier Martinez Canillas @ 2016-05-31 21:48 UTC (permalink / raw)
To: linux-kernel-u79uwXL29TY76Z2rM5mHXA
Cc: Javier Martinez Canillas, devicetree-u79uwXL29TY76Z2rM5mHXA,
Kukjin Kim, Krzysztof Kozlowski, Kumar Gala, Ian Campbell,
linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA, Rob Herring, Pawel Moll,
Mark Rutland, Russell King,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
The Exynos5800 Peach Pi and Exynos5420 Peach Pit Chromebooks have the
LDO10 1.8V output connected to the VDD18_TS{01,23,4} Exynos SoC pins.
Add this regulator as the input supply of the Thermal Management Unit
channels and also remove the always-on property since all the devices
using LDO10 as input supply are now defined.
Signed-off-by: Javier Martinez Canillas <javier-JPH+aEBZ4P+UEJcrhfAQsw@public.gmane.org>
---
arch/arm/boot/dts/exynos5420-peach-pit.dts | 21 ++++++++++++++++++++-
arch/arm/boot/dts/exynos5800-peach-pi.dts | 21 ++++++++++++++++++++-
2 files changed, 40 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index c1247402cb17..a55760b5fa82 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -425,7 +425,6 @@
regulator-name = "vdd_ldo10";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-always-on;
regulator-state-mem {
regulator-off-in-suspend;
};
@@ -924,6 +923,26 @@
assigned-clock-parents = <&clock CLK_FIN_PLL>;
};
+&tmu_cpu0 {
+ vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu1 {
+ vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu2 {
+ vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu3 {
+ vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_gpu {
+ vtmu-supply = <&ldo10_reg>;
+};
+
&rtc {
status = "okay";
clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index af1c9b9a63f9..34cc6cee0cdb 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -425,7 +425,6 @@
regulator-name = "vdd_ldo10";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-always-on;
regulator-state-mem {
regulator-off-in-suspend;
};
@@ -900,6 +899,26 @@
assigned-clock-parents = <&clock CLK_FIN_PLL>;
};
+&tmu_cpu0 {
+ vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu1 {
+ vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu2 {
+ vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu3 {
+ vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_gpu {
+ vtmu-supply = <&ldo10_reg>;
+};
+
&rtc {
status = "okay";
clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
--
2.5.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH] ARM: dts: exynos: Add TMU nodes regulator supply for Peach boards
@ 2016-05-31 21:48 ` Javier Martinez Canillas
0 siblings, 0 replies; 7+ messages in thread
From: Javier Martinez Canillas @ 2016-05-31 21:48 UTC (permalink / raw)
To: linux-kernel
Cc: Javier Martinez Canillas, devicetree, Kukjin Kim,
Krzysztof Kozlowski, Kumar Gala, Ian Campbell, linux-samsung-soc,
Rob Herring, Pawel Moll, Mark Rutland, Russell King,
linux-arm-kernel
The Exynos5800 Peach Pi and Exynos5420 Peach Pit Chromebooks have the
LDO10 1.8V output connected to the VDD18_TS{01,23,4} Exynos SoC pins.
Add this regulator as the input supply of the Thermal Management Unit
channels and also remove the always-on property since all the devices
using LDO10 as input supply are now defined.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---
arch/arm/boot/dts/exynos5420-peach-pit.dts | 21 ++++++++++++++++++++-
arch/arm/boot/dts/exynos5800-peach-pi.dts | 21 ++++++++++++++++++++-
2 files changed, 40 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index c1247402cb17..a55760b5fa82 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -425,7 +425,6 @@
regulator-name = "vdd_ldo10";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-always-on;
regulator-state-mem {
regulator-off-in-suspend;
};
@@ -924,6 +923,26 @@
assigned-clock-parents = <&clock CLK_FIN_PLL>;
};
+&tmu_cpu0 {
+ vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu1 {
+ vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu2 {
+ vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu3 {
+ vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_gpu {
+ vtmu-supply = <&ldo10_reg>;
+};
+
&rtc {
status = "okay";
clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index af1c9b9a63f9..34cc6cee0cdb 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -425,7 +425,6 @@
regulator-name = "vdd_ldo10";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-always-on;
regulator-state-mem {
regulator-off-in-suspend;
};
@@ -900,6 +899,26 @@
assigned-clock-parents = <&clock CLK_FIN_PLL>;
};
+&tmu_cpu0 {
+ vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu1 {
+ vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu2 {
+ vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu3 {
+ vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_gpu {
+ vtmu-supply = <&ldo10_reg>;
+};
+
&rtc {
status = "okay";
clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
--
2.5.5
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH] ARM: dts: exynos: Add TMU nodes regulator supply for Peach boards
@ 2016-05-31 21:48 ` Javier Martinez Canillas
0 siblings, 0 replies; 7+ messages in thread
From: Javier Martinez Canillas @ 2016-05-31 21:48 UTC (permalink / raw)
To: linux-arm-kernel
The Exynos5800 Peach Pi and Exynos5420 Peach Pit Chromebooks have the
LDO10 1.8V output connected to the VDD18_TS{01,23,4} Exynos SoC pins.
Add this regulator as the input supply of the Thermal Management Unit
channels and also remove the always-on property since all the devices
using LDO10 as input supply are now defined.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---
arch/arm/boot/dts/exynos5420-peach-pit.dts | 21 ++++++++++++++++++++-
arch/arm/boot/dts/exynos5800-peach-pi.dts | 21 ++++++++++++++++++++-
2 files changed, 40 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index c1247402cb17..a55760b5fa82 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -425,7 +425,6 @@
regulator-name = "vdd_ldo10";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-always-on;
regulator-state-mem {
regulator-off-in-suspend;
};
@@ -924,6 +923,26 @@
assigned-clock-parents = <&clock CLK_FIN_PLL>;
};
+&tmu_cpu0 {
+ vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu1 {
+ vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu2 {
+ vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu3 {
+ vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_gpu {
+ vtmu-supply = <&ldo10_reg>;
+};
+
&rtc {
status = "okay";
clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index af1c9b9a63f9..34cc6cee0cdb 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -425,7 +425,6 @@
regulator-name = "vdd_ldo10";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-always-on;
regulator-state-mem {
regulator-off-in-suspend;
};
@@ -900,6 +899,26 @@
assigned-clock-parents = <&clock CLK_FIN_PLL>;
};
+&tmu_cpu0 {
+ vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu1 {
+ vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu2 {
+ vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu3 {
+ vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_gpu {
+ vtmu-supply = <&ldo10_reg>;
+};
+
&rtc {
status = "okay";
clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
--
2.5.5
^ permalink raw reply related [flat|nested] 7+ messages in thread* Re: [PATCH] ARM: dts: exynos: Add TMU nodes regulator supply for Peach boards
2016-05-31 21:48 ` Javier Martinez Canillas
@ 2016-06-01 8:50 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 7+ messages in thread
From: Krzysztof Kozlowski @ 2016-06-01 8:50 UTC (permalink / raw)
To: Javier Martinez Canillas, linux-kernel
Cc: devicetree, Kukjin Kim, Kumar Gala, Ian Campbell,
linux-samsung-soc, Rob Herring, Pawel Moll, Mark Rutland,
Russell King, linux-arm-kernel
On 05/31/2016 11:48 PM, Javier Martinez Canillas wrote:
> The Exynos5800 Peach Pi and Exynos5420 Peach Pit Chromebooks have the
> LDO10 1.8V output connected to the VDD18_TS{01,23,4} Exynos SoC pins.
>
> Add this regulator as the input supply of the Thermal Management Unit
> channels and also remove the always-on property since all the devices
> using LDO10 as input supply are now defined.
>
> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
> ---
>
> arch/arm/boot/dts/exynos5420-peach-pit.dts | 21 ++++++++++++++++++++-
> arch/arm/boot/dts/exynos5800-peach-pi.dts | 21 ++++++++++++++++++++-
> 2 files changed, 40 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
> index c1247402cb17..a55760b5fa82 100644
> --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
> +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
> @@ -425,7 +425,6 @@
> regulator-name = "vdd_ldo10";
> regulator-min-microvolt = <1800000>;
> regulator-max-microvolt = <1800000>;
> - regulator-always-on;
> regulator-state-mem {
> regulator-off-in-suspend;
> };
> @@ -924,6 +923,26 @@
> assigned-clock-parents = <&clock CLK_FIN_PLL>;
> };
>
> +&tmu_cpu0 {
> + vtmu-supply = <&ldo10_reg>;
> +};
> +
> +&tmu_cpu1 {
> + vtmu-supply = <&ldo10_reg>;
> +};
> +
> +&tmu_cpu2 {
> + vtmu-supply = <&ldo10_reg>;
> +};
> +
> +&tmu_cpu3 {
> + vtmu-supply = <&ldo10_reg>;
> +};
> +
> +&tmu_gpu {
> + vtmu-supply = <&ldo10_reg>;
> +};
> +
Here and for Peach Pi please put the nodes in alphabetical order.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 7+ messages in thread* [PATCH] ARM: dts: exynos: Add TMU nodes regulator supply for Peach boards
@ 2016-06-01 8:50 ` Krzysztof Kozlowski
0 siblings, 0 replies; 7+ messages in thread
From: Krzysztof Kozlowski @ 2016-06-01 8:50 UTC (permalink / raw)
To: linux-arm-kernel
On 05/31/2016 11:48 PM, Javier Martinez Canillas wrote:
> The Exynos5800 Peach Pi and Exynos5420 Peach Pit Chromebooks have the
> LDO10 1.8V output connected to the VDD18_TS{01,23,4} Exynos SoC pins.
>
> Add this regulator as the input supply of the Thermal Management Unit
> channels and also remove the always-on property since all the devices
> using LDO10 as input supply are now defined.
>
> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
> ---
>
> arch/arm/boot/dts/exynos5420-peach-pit.dts | 21 ++++++++++++++++++++-
> arch/arm/boot/dts/exynos5800-peach-pi.dts | 21 ++++++++++++++++++++-
> 2 files changed, 40 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
> index c1247402cb17..a55760b5fa82 100644
> --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
> +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
> @@ -425,7 +425,6 @@
> regulator-name = "vdd_ldo10";
> regulator-min-microvolt = <1800000>;
> regulator-max-microvolt = <1800000>;
> - regulator-always-on;
> regulator-state-mem {
> regulator-off-in-suspend;
> };
> @@ -924,6 +923,26 @@
> assigned-clock-parents = <&clock CLK_FIN_PLL>;
> };
>
> +&tmu_cpu0 {
> + vtmu-supply = <&ldo10_reg>;
> +};
> +
> +&tmu_cpu1 {
> + vtmu-supply = <&ldo10_reg>;
> +};
> +
> +&tmu_cpu2 {
> + vtmu-supply = <&ldo10_reg>;
> +};
> +
> +&tmu_cpu3 {
> + vtmu-supply = <&ldo10_reg>;
> +};
> +
> +&tmu_gpu {
> + vtmu-supply = <&ldo10_reg>;
> +};
> +
Here and for Peach Pi please put the nodes in alphabetical order.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: [PATCH] ARM: dts: exynos: Add TMU nodes regulator supply for Peach boards
2016-06-01 8:50 ` Krzysztof Kozlowski
@ 2016-06-01 13:19 ` Javier Martinez Canillas
-1 siblings, 0 replies; 7+ messages in thread
From: Javier Martinez Canillas @ 2016-06-01 13:19 UTC (permalink / raw)
To: Krzysztof Kozlowski, linux-kernel
Cc: devicetree, Kukjin Kim, Kumar Gala, Ian Campbell,
linux-samsung-soc, Rob Herring, Pawel Moll, Mark Rutland,
Russell King, linux-arm-kernel
Hello Krzysztof,
On 06/01/2016 04:50 AM, Krzysztof Kozlowski wrote:
> On 05/31/2016 11:48 PM, Javier Martinez Canillas wrote:
[snip]
>>
>> +&tmu_cpu0 {
>> + vtmu-supply = <&ldo10_reg>;
>> +};
>> +
>> +&tmu_cpu1 {
>> + vtmu-supply = <&ldo10_reg>;
>> +};
>> +
>> +&tmu_cpu2 {
>> + vtmu-supply = <&ldo10_reg>;
>> +};
>> +
>> +&tmu_cpu3 {
>> + vtmu-supply = <&ldo10_reg>;
>> +};
>> +
>> +&tmu_gpu {
>> + vtmu-supply = <&ldo10_reg>;
>> +};
>> +
>
> Here and for Peach Pi please put the nodes in alphabetical order.
>
Right, sorry. I completely forgot about keeping the order.
> Best regards,
> Krzysztof
>
Best regards,
--
Javier Martinez Canillas
Open Source Group
Samsung Research America
^ permalink raw reply [flat|nested] 7+ messages in thread* [PATCH] ARM: dts: exynos: Add TMU nodes regulator supply for Peach boards
@ 2016-06-01 13:19 ` Javier Martinez Canillas
0 siblings, 0 replies; 7+ messages in thread
From: Javier Martinez Canillas @ 2016-06-01 13:19 UTC (permalink / raw)
To: linux-arm-kernel
Hello Krzysztof,
On 06/01/2016 04:50 AM, Krzysztof Kozlowski wrote:
> On 05/31/2016 11:48 PM, Javier Martinez Canillas wrote:
[snip]
>>
>> +&tmu_cpu0 {
>> + vtmu-supply = <&ldo10_reg>;
>> +};
>> +
>> +&tmu_cpu1 {
>> + vtmu-supply = <&ldo10_reg>;
>> +};
>> +
>> +&tmu_cpu2 {
>> + vtmu-supply = <&ldo10_reg>;
>> +};
>> +
>> +&tmu_cpu3 {
>> + vtmu-supply = <&ldo10_reg>;
>> +};
>> +
>> +&tmu_gpu {
>> + vtmu-supply = <&ldo10_reg>;
>> +};
>> +
>
> Here and for Peach Pi please put the nodes in alphabetical order.
>
Right, sorry. I completely forgot about keeping the order.
> Best regards,
> Krzysztof
>
Best regards,
--
Javier Martinez Canillas
Open Source Group
Samsung Research America
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2016-06-01 13:19 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-05-31 21:48 [PATCH] ARM: dts: exynos: Add TMU nodes regulator supply for Peach boards Javier Martinez Canillas
2016-05-31 21:48 ` Javier Martinez Canillas
2016-05-31 21:48 ` Javier Martinez Canillas
2016-06-01 8:50 ` Krzysztof Kozlowski
2016-06-01 8:50 ` Krzysztof Kozlowski
2016-06-01 13:19 ` Javier Martinez Canillas
2016-06-01 13:19 ` Javier Martinez Canillas
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.