All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kishon Vijay Abraham I <kishon-l0cyMroinI0@public.gmane.org>
To: Brian Norris <briannorris-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
Cc: Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>,
	Shawn Lin <shawn.lin-TNX95d0MmH7DzftRWevZcw@public.gmane.org>,
	Doug Anderson <dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	Brian Norris
	<computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: Re: [PATCH 4/4] phy: rockchip-emmc: reindent the register definitions
Date: Mon, 20 Jun 2016 18:42:08 +0530	[thread overview]
Message-ID: <5767EBA8.1060603@ti.com> (raw)
In-Reply-To: <1463092986-61777-4-git-send-email-briannorris-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>



On Friday 13 May 2016 04:13 AM, Brian Norris wrote:
> Some of the spacing was wrong (spaces instead of tabs), and due to
> longer entries added later, the columns weren't aligned. Let's get
> everything consistent.
> 
> Signed-off-by: Brian Norris <briannorris-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>

Acked-by: Kishon Vijay Abraham I <kishon-l0cyMroinI0@public.gmane.org>
> ---
>  drivers/phy/phy-rockchip-emmc.c | 76 ++++++++++++++++++++---------------------
>  1 file changed, 38 insertions(+), 38 deletions(-)
> 
> diff --git a/drivers/phy/phy-rockchip-emmc.c b/drivers/phy/phy-rockchip-emmc.c
> index f94d3a6587ed..c27ca2b39dfe 100644
> --- a/drivers/phy/phy-rockchip-emmc.c
> +++ b/drivers/phy/phy-rockchip-emmc.c
> @@ -31,44 +31,44 @@
>  		((val) << (shift) | (mask) << ((shift) + 16))
>  
>  /* Register definition */
> -#define GRF_EMMCPHY_CON0	0x0
> -#define GRF_EMMCPHY_CON1	0x4
> -#define GRF_EMMCPHY_CON2	0x8
> -#define GRF_EMMCPHY_CON3	0xc
> -#define GRF_EMMCPHY_CON4	0x10
> -#define GRF_EMMCPHY_CON5	0x14
> -#define GRF_EMMCPHY_CON6	0x18
> -#define GRF_EMMCPHY_STATUS	0x20
> -
> -#define PHYCTRL_PDB_MASK	0x1
> -#define PHYCTRL_PDB_SHIFT	0x0
> -#define PHYCTRL_PDB_PWR_ON	0x1
> -#define PHYCTRL_PDB_PWR_OFF	0x0
> -#define PHYCTRL_ENDLL_MASK	0x1
> -#define PHYCTRL_ENDLL_SHIFT     0x1
> -#define PHYCTRL_ENDLL_ENABLE	0x1
> -#define PHYCTRL_ENDLL_DISABLE	0x0
> -#define PHYCTRL_CALDONE_MASK	0x1
> -#define PHYCTRL_CALDONE_SHIFT   0x6
> -#define PHYCTRL_CALDONE_DONE	0x1
> -#define PHYCTRL_CALDONE_GOING	0x0
> -#define PHYCTRL_DLLRDY_MASK	0x1
> -#define PHYCTRL_DLLRDY_SHIFT	0x5
> -#define PHYCTRL_DLLRDY_DONE	0x1
> -#define PHYCTRL_DLLRDY_GOING	0x0
> -#define PHYCTRL_FREQSEL_200M	0x0
> -#define PHYCTRL_FREQSEL_50M	0x1
> -#define PHYCTRL_FREQSEL_100M	0x2
> -#define PHYCTRL_FREQSEL_150M	0x3
> -#define PHYCTRL_FREQSEL_MASK	0x3
> -#define PHYCTRL_FREQSEL_SHIFT	0xc
> -#define PHYCTRL_DR_MASK		0x7
> -#define PHYCTRL_DR_SHIFT	0x4
> -#define PHYCTRL_DR_50OHM	0x0
> -#define PHYCTRL_DR_33OHM	0x1
> -#define PHYCTRL_DR_66OHM	0x2
> -#define PHYCTRL_DR_100OHM	0x3
> -#define PHYCTRL_DR_40OHM	0x4
> +#define GRF_EMMCPHY_CON0		0x0
> +#define GRF_EMMCPHY_CON1		0x4
> +#define GRF_EMMCPHY_CON2		0x8
> +#define GRF_EMMCPHY_CON3		0xc
> +#define GRF_EMMCPHY_CON4		0x10
> +#define GRF_EMMCPHY_CON5		0x14
> +#define GRF_EMMCPHY_CON6		0x18
> +#define GRF_EMMCPHY_STATUS		0x20
> +
> +#define PHYCTRL_PDB_MASK		0x1
> +#define PHYCTRL_PDB_SHIFT		0x0
> +#define PHYCTRL_PDB_PWR_ON		0x1
> +#define PHYCTRL_PDB_PWR_OFF		0x0
> +#define PHYCTRL_ENDLL_MASK		0x1
> +#define PHYCTRL_ENDLL_SHIFT		0x1
> +#define PHYCTRL_ENDLL_ENABLE		0x1
> +#define PHYCTRL_ENDLL_DISABLE		0x0
> +#define PHYCTRL_CALDONE_MASK		0x1
> +#define PHYCTRL_CALDONE_SHIFT		0x6
> +#define PHYCTRL_CALDONE_DONE		0x1
> +#define PHYCTRL_CALDONE_GOING		0x0
> +#define PHYCTRL_DLLRDY_MASK		0x1
> +#define PHYCTRL_DLLRDY_SHIFT		0x5
> +#define PHYCTRL_DLLRDY_DONE		0x1
> +#define PHYCTRL_DLLRDY_GOING		0x0
> +#define PHYCTRL_FREQSEL_200M		0x0
> +#define PHYCTRL_FREQSEL_50M		0x1
> +#define PHYCTRL_FREQSEL_100M		0x2
> +#define PHYCTRL_FREQSEL_150M		0x3
> +#define PHYCTRL_FREQSEL_MASK		0x3
> +#define PHYCTRL_FREQSEL_SHIFT		0xc
> +#define PHYCTRL_DR_MASK			0x7
> +#define PHYCTRL_DR_SHIFT		0x4
> +#define PHYCTRL_DR_50OHM		0x0
> +#define PHYCTRL_DR_33OHM		0x1
> +#define PHYCTRL_DR_66OHM		0x2
> +#define PHYCTRL_DR_100OHM		0x3
> +#define PHYCTRL_DR_40OHM		0x4
>  #define PHYCTRL_OTAPDLYENA		0x1
>  #define PHYCTRL_OTAPDLYENA_MASK		0x1
>  #define PHYCTRL_OTAPDLYENA_SHIFT	0xb
> 

WARNING: multiple messages have this Message-ID (diff)
From: kishon@ti.com (Kishon Vijay Abraham I)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 4/4] phy: rockchip-emmc: reindent the register definitions
Date: Mon, 20 Jun 2016 18:42:08 +0530	[thread overview]
Message-ID: <5767EBA8.1060603@ti.com> (raw)
In-Reply-To: <1463092986-61777-4-git-send-email-briannorris@chromium.org>



On Friday 13 May 2016 04:13 AM, Brian Norris wrote:
> Some of the spacing was wrong (spaces instead of tabs), and due to
> longer entries added later, the columns weren't aligned. Let's get
> everything consistent.
> 
> Signed-off-by: Brian Norris <briannorris@chromium.org>

Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
> ---
>  drivers/phy/phy-rockchip-emmc.c | 76 ++++++++++++++++++++---------------------
>  1 file changed, 38 insertions(+), 38 deletions(-)
> 
> diff --git a/drivers/phy/phy-rockchip-emmc.c b/drivers/phy/phy-rockchip-emmc.c
> index f94d3a6587ed..c27ca2b39dfe 100644
> --- a/drivers/phy/phy-rockchip-emmc.c
> +++ b/drivers/phy/phy-rockchip-emmc.c
> @@ -31,44 +31,44 @@
>  		((val) << (shift) | (mask) << ((shift) + 16))
>  
>  /* Register definition */
> -#define GRF_EMMCPHY_CON0	0x0
> -#define GRF_EMMCPHY_CON1	0x4
> -#define GRF_EMMCPHY_CON2	0x8
> -#define GRF_EMMCPHY_CON3	0xc
> -#define GRF_EMMCPHY_CON4	0x10
> -#define GRF_EMMCPHY_CON5	0x14
> -#define GRF_EMMCPHY_CON6	0x18
> -#define GRF_EMMCPHY_STATUS	0x20
> -
> -#define PHYCTRL_PDB_MASK	0x1
> -#define PHYCTRL_PDB_SHIFT	0x0
> -#define PHYCTRL_PDB_PWR_ON	0x1
> -#define PHYCTRL_PDB_PWR_OFF	0x0
> -#define PHYCTRL_ENDLL_MASK	0x1
> -#define PHYCTRL_ENDLL_SHIFT     0x1
> -#define PHYCTRL_ENDLL_ENABLE	0x1
> -#define PHYCTRL_ENDLL_DISABLE	0x0
> -#define PHYCTRL_CALDONE_MASK	0x1
> -#define PHYCTRL_CALDONE_SHIFT   0x6
> -#define PHYCTRL_CALDONE_DONE	0x1
> -#define PHYCTRL_CALDONE_GOING	0x0
> -#define PHYCTRL_DLLRDY_MASK	0x1
> -#define PHYCTRL_DLLRDY_SHIFT	0x5
> -#define PHYCTRL_DLLRDY_DONE	0x1
> -#define PHYCTRL_DLLRDY_GOING	0x0
> -#define PHYCTRL_FREQSEL_200M	0x0
> -#define PHYCTRL_FREQSEL_50M	0x1
> -#define PHYCTRL_FREQSEL_100M	0x2
> -#define PHYCTRL_FREQSEL_150M	0x3
> -#define PHYCTRL_FREQSEL_MASK	0x3
> -#define PHYCTRL_FREQSEL_SHIFT	0xc
> -#define PHYCTRL_DR_MASK		0x7
> -#define PHYCTRL_DR_SHIFT	0x4
> -#define PHYCTRL_DR_50OHM	0x0
> -#define PHYCTRL_DR_33OHM	0x1
> -#define PHYCTRL_DR_66OHM	0x2
> -#define PHYCTRL_DR_100OHM	0x3
> -#define PHYCTRL_DR_40OHM	0x4
> +#define GRF_EMMCPHY_CON0		0x0
> +#define GRF_EMMCPHY_CON1		0x4
> +#define GRF_EMMCPHY_CON2		0x8
> +#define GRF_EMMCPHY_CON3		0xc
> +#define GRF_EMMCPHY_CON4		0x10
> +#define GRF_EMMCPHY_CON5		0x14
> +#define GRF_EMMCPHY_CON6		0x18
> +#define GRF_EMMCPHY_STATUS		0x20
> +
> +#define PHYCTRL_PDB_MASK		0x1
> +#define PHYCTRL_PDB_SHIFT		0x0
> +#define PHYCTRL_PDB_PWR_ON		0x1
> +#define PHYCTRL_PDB_PWR_OFF		0x0
> +#define PHYCTRL_ENDLL_MASK		0x1
> +#define PHYCTRL_ENDLL_SHIFT		0x1
> +#define PHYCTRL_ENDLL_ENABLE		0x1
> +#define PHYCTRL_ENDLL_DISABLE		0x0
> +#define PHYCTRL_CALDONE_MASK		0x1
> +#define PHYCTRL_CALDONE_SHIFT		0x6
> +#define PHYCTRL_CALDONE_DONE		0x1
> +#define PHYCTRL_CALDONE_GOING		0x0
> +#define PHYCTRL_DLLRDY_MASK		0x1
> +#define PHYCTRL_DLLRDY_SHIFT		0x5
> +#define PHYCTRL_DLLRDY_DONE		0x1
> +#define PHYCTRL_DLLRDY_GOING		0x0
> +#define PHYCTRL_FREQSEL_200M		0x0
> +#define PHYCTRL_FREQSEL_50M		0x1
> +#define PHYCTRL_FREQSEL_100M		0x2
> +#define PHYCTRL_FREQSEL_150M		0x3
> +#define PHYCTRL_FREQSEL_MASK		0x3
> +#define PHYCTRL_FREQSEL_SHIFT		0xc
> +#define PHYCTRL_DR_MASK			0x7
> +#define PHYCTRL_DR_SHIFT		0x4
> +#define PHYCTRL_DR_50OHM		0x0
> +#define PHYCTRL_DR_33OHM		0x1
> +#define PHYCTRL_DR_66OHM		0x2
> +#define PHYCTRL_DR_100OHM		0x3
> +#define PHYCTRL_DR_40OHM		0x4
>  #define PHYCTRL_OTAPDLYENA		0x1
>  #define PHYCTRL_OTAPDLYENA_MASK		0x1
>  #define PHYCTRL_OTAPDLYENA_SHIFT	0xb
> 

WARNING: multiple messages have this Message-ID (diff)
From: Kishon Vijay Abraham I <kishon@ti.com>
To: Brian Norris <briannorris@chromium.org>
Cc: Heiko Stuebner <heiko@sntech.de>, <linux-kernel@vger.kernel.org>,
	<linux-rockchip@lists.infradead.org>,
	Doug Anderson <dianders@chromium.org>,
	Shawn Lin <shawn.lin@rock-chips.com>,
	<linux-arm-kernel@lists.infradead.org>,
	Brian Norris <computersforpeace@gmail.com>
Subject: Re: [PATCH 4/4] phy: rockchip-emmc: reindent the register definitions
Date: Mon, 20 Jun 2016 18:42:08 +0530	[thread overview]
Message-ID: <5767EBA8.1060603@ti.com> (raw)
In-Reply-To: <1463092986-61777-4-git-send-email-briannorris@chromium.org>



On Friday 13 May 2016 04:13 AM, Brian Norris wrote:
> Some of the spacing was wrong (spaces instead of tabs), and due to
> longer entries added later, the columns weren't aligned. Let's get
> everything consistent.
> 
> Signed-off-by: Brian Norris <briannorris@chromium.org>

Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
> ---
>  drivers/phy/phy-rockchip-emmc.c | 76 ++++++++++++++++++++---------------------
>  1 file changed, 38 insertions(+), 38 deletions(-)
> 
> diff --git a/drivers/phy/phy-rockchip-emmc.c b/drivers/phy/phy-rockchip-emmc.c
> index f94d3a6587ed..c27ca2b39dfe 100644
> --- a/drivers/phy/phy-rockchip-emmc.c
> +++ b/drivers/phy/phy-rockchip-emmc.c
> @@ -31,44 +31,44 @@
>  		((val) << (shift) | (mask) << ((shift) + 16))
>  
>  /* Register definition */
> -#define GRF_EMMCPHY_CON0	0x0
> -#define GRF_EMMCPHY_CON1	0x4
> -#define GRF_EMMCPHY_CON2	0x8
> -#define GRF_EMMCPHY_CON3	0xc
> -#define GRF_EMMCPHY_CON4	0x10
> -#define GRF_EMMCPHY_CON5	0x14
> -#define GRF_EMMCPHY_CON6	0x18
> -#define GRF_EMMCPHY_STATUS	0x20
> -
> -#define PHYCTRL_PDB_MASK	0x1
> -#define PHYCTRL_PDB_SHIFT	0x0
> -#define PHYCTRL_PDB_PWR_ON	0x1
> -#define PHYCTRL_PDB_PWR_OFF	0x0
> -#define PHYCTRL_ENDLL_MASK	0x1
> -#define PHYCTRL_ENDLL_SHIFT     0x1
> -#define PHYCTRL_ENDLL_ENABLE	0x1
> -#define PHYCTRL_ENDLL_DISABLE	0x0
> -#define PHYCTRL_CALDONE_MASK	0x1
> -#define PHYCTRL_CALDONE_SHIFT   0x6
> -#define PHYCTRL_CALDONE_DONE	0x1
> -#define PHYCTRL_CALDONE_GOING	0x0
> -#define PHYCTRL_DLLRDY_MASK	0x1
> -#define PHYCTRL_DLLRDY_SHIFT	0x5
> -#define PHYCTRL_DLLRDY_DONE	0x1
> -#define PHYCTRL_DLLRDY_GOING	0x0
> -#define PHYCTRL_FREQSEL_200M	0x0
> -#define PHYCTRL_FREQSEL_50M	0x1
> -#define PHYCTRL_FREQSEL_100M	0x2
> -#define PHYCTRL_FREQSEL_150M	0x3
> -#define PHYCTRL_FREQSEL_MASK	0x3
> -#define PHYCTRL_FREQSEL_SHIFT	0xc
> -#define PHYCTRL_DR_MASK		0x7
> -#define PHYCTRL_DR_SHIFT	0x4
> -#define PHYCTRL_DR_50OHM	0x0
> -#define PHYCTRL_DR_33OHM	0x1
> -#define PHYCTRL_DR_66OHM	0x2
> -#define PHYCTRL_DR_100OHM	0x3
> -#define PHYCTRL_DR_40OHM	0x4
> +#define GRF_EMMCPHY_CON0		0x0
> +#define GRF_EMMCPHY_CON1		0x4
> +#define GRF_EMMCPHY_CON2		0x8
> +#define GRF_EMMCPHY_CON3		0xc
> +#define GRF_EMMCPHY_CON4		0x10
> +#define GRF_EMMCPHY_CON5		0x14
> +#define GRF_EMMCPHY_CON6		0x18
> +#define GRF_EMMCPHY_STATUS		0x20
> +
> +#define PHYCTRL_PDB_MASK		0x1
> +#define PHYCTRL_PDB_SHIFT		0x0
> +#define PHYCTRL_PDB_PWR_ON		0x1
> +#define PHYCTRL_PDB_PWR_OFF		0x0
> +#define PHYCTRL_ENDLL_MASK		0x1
> +#define PHYCTRL_ENDLL_SHIFT		0x1
> +#define PHYCTRL_ENDLL_ENABLE		0x1
> +#define PHYCTRL_ENDLL_DISABLE		0x0
> +#define PHYCTRL_CALDONE_MASK		0x1
> +#define PHYCTRL_CALDONE_SHIFT		0x6
> +#define PHYCTRL_CALDONE_DONE		0x1
> +#define PHYCTRL_CALDONE_GOING		0x0
> +#define PHYCTRL_DLLRDY_MASK		0x1
> +#define PHYCTRL_DLLRDY_SHIFT		0x5
> +#define PHYCTRL_DLLRDY_DONE		0x1
> +#define PHYCTRL_DLLRDY_GOING		0x0
> +#define PHYCTRL_FREQSEL_200M		0x0
> +#define PHYCTRL_FREQSEL_50M		0x1
> +#define PHYCTRL_FREQSEL_100M		0x2
> +#define PHYCTRL_FREQSEL_150M		0x3
> +#define PHYCTRL_FREQSEL_MASK		0x3
> +#define PHYCTRL_FREQSEL_SHIFT		0xc
> +#define PHYCTRL_DR_MASK			0x7
> +#define PHYCTRL_DR_SHIFT		0x4
> +#define PHYCTRL_DR_50OHM		0x0
> +#define PHYCTRL_DR_33OHM		0x1
> +#define PHYCTRL_DR_66OHM		0x2
> +#define PHYCTRL_DR_100OHM		0x3
> +#define PHYCTRL_DR_40OHM		0x4
>  #define PHYCTRL_OTAPDLYENA		0x1
>  #define PHYCTRL_OTAPDLYENA_MASK		0x1
>  #define PHYCTRL_OTAPDLYENA_SHIFT	0xb
> 

  parent reply	other threads:[~2016-06-20 13:12 UTC|newest]

Thread overview: 62+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-05-12 22:43 [PATCH 1/4] phy: rockchip-emmc: give DLL some extra time to be ready Brian Norris
2016-05-12 22:43 ` Brian Norris
2016-05-12 22:43 ` Brian Norris
     [not found] ` <1463092986-61777-1-git-send-email-briannorris-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
2016-05-12 22:43   ` [PATCH 2/4] phy: rockchip-emmc: configure frequency range and drive impedance Brian Norris
2016-05-12 22:43     ` Brian Norris
2016-05-12 22:43     ` Brian Norris
2016-05-13  1:02     ` Shawn Lin
2016-05-13  1:02       ` Shawn Lin
2016-05-13 18:46       ` Doug Anderson
2016-05-13 18:46         ` Doug Anderson
2016-05-13 21:04         ` Brian Norris
2016-05-13 21:04           ` Brian Norris
2016-05-24  4:51         ` Doug Anderson
2016-05-24  4:51           ` Doug Anderson
2016-05-13 21:09     ` [PATCH v2 " Brian Norris
2016-05-13 21:09       ` Brian Norris
2016-05-13 22:04       ` Doug Anderson
2016-05-13 22:04         ` Doug Anderson
2016-06-16 23:36       ` Heiko Stuebner
2016-06-16 23:36         ` Heiko Stuebner
2016-06-20 13:11     ` [PATCH " Kishon Vijay Abraham I
2016-06-20 13:11       ` Kishon Vijay Abraham I
2016-06-20 13:11       ` Kishon Vijay Abraham I
2016-06-20 13:11   ` [PATCH 1/4] phy: rockchip-emmc: give DLL some extra time to be ready Kishon Vijay Abraham I
2016-06-20 13:11     ` Kishon Vijay Abraham I
2016-06-20 13:11     ` Kishon Vijay Abraham I
2016-06-20 16:19     ` Brian Norris
2016-06-20 16:19       ` Brian Norris
2016-06-20 16:19       ` Brian Norris
2016-06-20 16:25       ` Doug Anderson
2016-06-20 16:25         ` Doug Anderson
2016-06-20 16:50         ` Brian Norris
2016-06-20 16:50           ` Brian Norris
2016-05-12 22:43 ` [PATCH 3/4] phy: rockchip-emmc: configure default output tap delay Brian Norris
2016-05-12 22:43   ` Brian Norris
2016-05-12 22:43   ` Brian Norris
2016-05-13 22:25   ` Doug Anderson
2016-05-13 22:25     ` Doug Anderson
2016-05-16  4:15     ` Shawn Lin
2016-05-16  4:15       ` Shawn Lin
     [not found]       ` <52567d92-d1d3-f089-65c2-a30f3a00386b-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2016-05-16 15:12         ` Doug Anderson
2016-05-16 15:12           ` Doug Anderson
2016-05-16 15:12           ` Doug Anderson
2016-06-16 23:36   ` Heiko Stuebner
2016-06-16 23:36     ` Heiko Stuebner
     [not found]   ` <1463092986-61777-3-git-send-email-briannorris-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
2016-06-20 13:11     ` Kishon Vijay Abraham I
2016-06-20 13:11       ` Kishon Vijay Abraham I
2016-06-20 13:11       ` Kishon Vijay Abraham I
2016-05-12 22:43 ` [PATCH 4/4] phy: rockchip-emmc: reindent the register definitions Brian Norris
2016-05-12 22:43   ` Brian Norris
2016-05-12 22:43   ` Brian Norris
2016-05-13 22:26   ` Doug Anderson
2016-05-13 22:26     ` Doug Anderson
2016-06-16 23:37   ` Heiko Stuebner
2016-06-16 23:37     ` Heiko Stuebner
     [not found]   ` <1463092986-61777-4-git-send-email-briannorris-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
2016-06-20 13:12     ` Kishon Vijay Abraham I [this message]
2016-06-20 13:12       ` Kishon Vijay Abraham I
2016-06-20 13:12       ` Kishon Vijay Abraham I
2016-05-13 22:01 ` [PATCH 1/4] phy: rockchip-emmc: give DLL some extra time to be ready Doug Anderson
2016-05-13 22:01   ` Doug Anderson
2016-06-16 23:35 ` Heiko Stuebner
2016-06-16 23:35   ` Heiko Stuebner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5767EBA8.1060603@ti.com \
    --to=kishon-l0cymroini0@public.gmane.org \
    --cc=briannorris-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
    --cc=computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
    --cc=heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=shawn.lin-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.