* [PATCH v2 3/4] arm64: dts: exynos: make tm2 and tm2e independent from each other
@ 2017-01-05 8:27 ` Jaechul Lee
0 siblings, 0 replies; 33+ messages in thread
From: Jaechul Lee @ 2017-01-05 8:27 UTC (permalink / raw)
To: Dmitry Torokhov, Rob Herring, Mark Rutland, Catalin Marinas,
Will Deacon, Kukjin Kim, Krzysztof Kozlowski,
Javier Martinez Canillas
Cc: Jaechul Lee, Andi Shyti, Chanwoo Choi, beomho.seo, galaxyra,
linux-arm-kernel, linux-input, devicetree, linux-kernel,
linux-samsung-soc
From: Andi Shyti <andi.shyti@samsung.com>
Currently tm2e dts includes tm2 but there are some differences
between the two boards and tm2 has some properties that tm2e
doesn't have.
That's why it's important to keep the two dts files independent
and put all the commonalities in a tm2-common.dtsi file.
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com>
---
.../boot/dts/exynos/exynos5433-tm2-common.dtsi | 1116 +++++++++++++++++++
arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 1138 +-------------------
arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts | 2 +-
3 files changed, 1136 insertions(+), 1120 deletions(-)
create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
rewrite arch/arm64/boot/dts/exynos/exynos5433-tm2.dts (98%)
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
new file mode 100644
index 0000000..7ad0019
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
@@ -0,0 +1,1116 @@
+/*
+ * SAMSUNG Exynos5433 TM2 board device tree source
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ *
+ * Device tree source file for Samsung's TM2 board which is based on
+ * Samsung Exynos5433 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include "exynos5433.dtsi"
+#include <dt-bindings/clock/samsung,s2mps11.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ aliases {
+ gsc0 = &gsc_0;
+ gsc1 = &gsc_1;
+ gsc2 = &gsc_2;
+ pinctrl0 = &pinctrl_alive;
+ pinctrl1 = &pinctrl_aud;
+ pinctrl2 = &pinctrl_cpif;
+ pinctrl3 = &pinctrl_ese;
+ pinctrl4 = &pinctrl_finger;
+ pinctrl5 = &pinctrl_fsys;
+ pinctrl6 = &pinctrl_imem;
+ pinctrl7 = &pinctrl_nfc;
+ pinctrl8 = &pinctrl_peric;
+ pinctrl9 = &pinctrl_touch;
+ serial0 = &serial_0;
+ serial1 = &serial_1;
+ serial2 = &serial_2;
+ serial3 = &serial_3;
+ spi0 = &spi_0;
+ spi1 = &spi_1;
+ spi2 = &spi_2;
+ spi3 = &spi_3;
+ spi4 = &spi_4;
+ mshc0 = &mshc_0;
+ mshc2 = &mshc_2;
+ };
+
+ chosen {
+ stdout-path = &serial_1;
+ };
+
+ memory@20000000 {
+ device_type = "memory";
+ reg = <0x0 0x20000000 0x0 0xc0000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ power-key {
+ gpios = <&gpa2 7 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ label = "power key";
+ debounce-interval = <10>;
+ };
+
+ volume-up-key {
+ gpios = <&gpa2 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ label = "volume-up key";
+ debounce-interval = <10>;
+ };
+
+ volume-down-key {
+ gpios = <&gpa2 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ label = "volume-down key";
+ debounce-interval = <10>;
+ };
+
+ homepage-key {
+ gpios = <&gpa0 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_MENU>;
+ label = "homepage key";
+ debounce-interval = <10>;
+ };
+ };
+
+ i2c_max98504: i2c-gpio-0 {
+ compatible = "i2c-gpio";
+ gpios = <&gpd0 1 GPIO_ACTIVE_HIGH /* SPK_AMP_SDA */
+ &gpd0 0 GPIO_ACTIVE_HIGH /* SPK_AMP_SCL */ >;
+ i2c-gpio,delay-us = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ max98504: max98504@31 {
+ compatible = "maxim,max98504";
+ reg = <0x31>;
+ maxim,rx-path = <1>;
+ maxim,tx-path = <1>;
+ maxim,tx-channel-mask = <3>;
+ maxim,tx-channel-source = <2>;
+ };
+ };
+
+ sound {
+ compatible = "samsung,tm2-audio";
+ audio-codec = <&wm5110>;
+ i2s-controller = <&i2s0>;
+ audio-amplifier = <&max98504>;
+ mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>;
+ model = "wm5110";
+ samsung,audio-routing =
+ /* Headphone */
+ "HP", "HPOUT1L",
+ "HP", "HPOUT1R",
+
+ /* Speaker */
+ "SPK", "SPKOUT",
+ "SPKOUT", "HPOUT2L",
+ "SPKOUT", "HPOUT2R",
+
+ /* Receiver */
+ "RCV", "HPOUT3L",
+ "RCV", "HPOUT3R";
+ status = "okay";
+ };
+};
+
+&adc {
+ vdd-supply = <&ldo3_reg>;
+ status = "okay";
+
+ thermistor-ap {
+ compatible = "murata,ncp03wf104";
+ pullup-uv = <1800000>;
+ pullup-ohm = <100000>;
+ pulldown-ohm = <0>;
+ io-channels = <&adc 0>;
+ };
+
+ thermistor-battery {
+ compatible = "murata,ncp03wf104";
+ pullup-uv = <1800000>;
+ pullup-ohm = <100000>;
+ pulldown-ohm = <0>;
+ io-channels = <&adc 1>;
+ #thermal-sensor-cells = <0>;
+ };
+
+ thermistor-charger {
+ compatible = "murata,ncp03wf104";
+ pullup-uv = <1800000>;
+ pullup-ohm = <100000>;
+ pulldown-ohm = <0>;
+ io-channels = <&adc 2>;
+ };
+};
+
+&bus_g2d_400 {
+ devfreq-events = <&ppmu_event0_d0_general>, <&ppmu_event0_d1_general>;
+ vdd-supply = <&buck4_reg>;
+ exynos,saturation-ratio = <10>;
+ status = "okay";
+};
+
+&bus_g2d_266 {
+ devfreq = <&bus_g2d_400>;
+ status = "okay";
+};
+
+&bus_gscl {
+ devfreq = <&bus_g2d_400>;
+ status = "okay";
+};
+
+&bus_hevc {
+ devfreq = <&bus_g2d_400>;
+ status = "okay";
+};
+
+&bus_jpeg {
+ devfreq = <&bus_g2d_400>;
+ status = "okay";
+};
+
+&bus_mfc {
+ devfreq = <&bus_g2d_400>;
+ status = "okay";
+};
+
+&bus_mscl {
+ devfreq = <&bus_g2d_400>;
+ status = "okay";
+};
+
+&bus_noc0 {
+ devfreq = <&bus_g2d_400>;
+ status = "okay";
+};
+
+&bus_noc1 {
+ devfreq = <&bus_g2d_400>;
+ status = "okay";
+};
+
+&bus_noc2 {
+ devfreq = <&bus_g2d_400>;
+ status = "okay";
+};
+
+&cmu_aud {
+ assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>;
+ assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>;
+};
+
+&cmu_fsys {
+ assigned-clocks = <&cmu_top CLK_MOUT_SCLK_USBDRD30>,
+ <&cmu_top CLK_MOUT_SCLK_USBHOST30>,
+ <&cmu_fsys CLK_MOUT_SCLK_USBDRD30_USER>,
+ <&cmu_fsys CLK_MOUT_SCLK_USBHOST30_USER>,
+ <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_USER>,
+ <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_USER>,
+ <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_USER>,
+ <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_USER>,
+ <&cmu_top CLK_DIV_SCLK_USBDRD30>,
+ <&cmu_top CLK_DIV_SCLK_USBHOST30>;
+ assigned-clock-parents = <&cmu_top CLK_MOUT_BUS_PLL_USER>,
+ <&cmu_top CLK_MOUT_BUS_PLL_USER>,
+ <&cmu_top CLK_SCLK_USBDRD30_FSYS>,
+ <&cmu_top CLK_SCLK_USBHOST30_FSYS>,
+ <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_PHY>,
+ <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_PHY>,
+ <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_PHY>,
+ <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_PHY>;
+ assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>,
+ <66700000>, <66700000>;
+};
+
+&cmu_gscl {
+ assigned-clocks = <&cmu_gscl CLK_MOUT_ACLK_GSCL_111_USER>,
+ <&cmu_gscl CLK_MOUT_ACLK_GSCL_333_USER>;
+ assigned-clock-parents = <&cmu_top CLK_ACLK_GSCL_111>,
+ <&cmu_top CLK_ACLK_GSCL_333>;
+};
+
+&cmu_mfc {
+ assigned-clocks = <&cmu_mfc CLK_MOUT_ACLK_MFC_400_USER>;
+ assigned-clock-parents = <&cmu_top CLK_ACLK_MFC_400>;
+};
+
+&cmu_mscl {
+ assigned-clocks = <&cmu_mscl CLK_MOUT_ACLK_MSCL_400_USER>,
+ <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>,
+ <&cmu_mscl CLK_MOUT_SCLK_JPEG>,
+ <&cmu_top CLK_MOUT_SCLK_JPEG_A>;
+ assigned-clock-parents = <&cmu_top CLK_ACLK_MSCL_400>,
+ <&cmu_top CLK_SCLK_JPEG_MSCL>,
+ <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>,
+ <&cmu_top CLK_MOUT_BUS_PLL_USER>;
+};
+
+&cpu0 {
+ cpu-supply = <&buck3_reg>;
+};
+
+&cpu4 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&decon {
+ status = "okay";
+
+ i80-if-timings {
+ };
+};
+
+&dsi {
+ status = "okay";
+ vddcore-supply = <&ldo6_reg>;
+ vddio-supply = <&ldo7_reg>;
+ samsung,pll-clock-frequency = <24000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&te_irq>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+
+ dsi_out: endpoint {
+ samsung,burst-clock-frequency = <512000000>;
+ samsung,esc-clock-frequency = <16000000>;
+ };
+ };
+ };
+};
+
+&hsi2c_0 {
+ status = "okay";
+ clock-frequency = <2500000>;
+
+ s2mps13-pmic@66 {
+ compatible = "samsung,s2mps13-pmic";
+ interrupt-parent = <&gpa0>;
+ interrupts = <7 IRQ_TYPE_NONE>;
+ reg = <0x66>;
+ samsung,s2mps11-wrstbi-ground;
+
+ s2mps13_osc: clocks {
+ compatible = "samsung,s2mps13-clk";
+ #clock-cells = <1>;
+ clock-output-names = "s2mps13_ap", "s2mps13_cp",
+ "s2mps13_bt";
+ };
+
+ regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "VDD_ALIVE_0.9V_AP";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-always-on;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "VDDQ_MMC2_2.8V_AP";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "VDD1_E_1.8V_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "VDD10_MIF_PLL_1.0V_AP";
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "VDD10_DPLL_1.0V_AP";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "VDD10_MIPI2L_1.0V_AP";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "VDD18_MIPI2L_1.8V_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "VDD18_LLI_1.8V_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo9_reg: LDO9 {
+ regulator-name = "VDD18_ABB_ETC_1.8V_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "VDD33_USB30_3.0V_AP";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "VDD_INT_M_1.0V_AP";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "VDD_KFC_M_1.1V_AP";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "VDD_G3D_M_0.95V_AP";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <950000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "VDDQ_M1_LDO_1.2V_AP";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "VDDQ_M2_LDO_1.2V_AP";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "VDDQ_EFUSE";
+ regulator-min-microvolt = <1400000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-always-on;
+ };
+
+ ldo17_reg: LDO17 {
+ regulator-name = "V_TFLASH_2.8V_AP";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo18_reg: LDO18 {
+ regulator-name = "V_CODEC_1.8V_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo19_reg: LDO19 {
+ regulator-name = "VDDA_1.8V_COMP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo20_reg: LDO20 {
+ regulator-name = "VCC_2.8V_AP";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ ldo21_reg: LDO21 {
+ regulator-name = "VT_CAM_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo22_reg: LDO22 {
+ regulator-name = "CAM_IO_1.8V_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo23_reg: LDO23 {
+ regulator-name = "CAM_SEN_CORE_1.2V_AP";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ ldo24_reg: LDO24 {
+ regulator-name = "VT_CAM_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ ldo25_reg: LDO25 {
+ regulator-name = "CAM_SEN_A2.8V_AP";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo26_reg: LDO26 {
+ regulator-name = "CAM_AF_2.8V_AP";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo27_reg: LDO27 {
+ regulator-name = "VCC_3.0V_LCD_AP";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ ldo28_reg: LDO28 {
+ regulator-name = "VCC_1.8V_LCD_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo29_reg: LDO29 {
+ regulator-name = "VT_CAM_2.8V";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ ldo30_reg: LDO30 {
+ regulator-name = "TSP_AVDD_3.3V_AP";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo31_reg: LDO31 {
+ regulator-name = "TSP_VDD_1.85V_AP";
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <1850000>;
+ };
+
+ ldo32_reg: LDO32 {
+ regulator-name = "VTOUCH_1.8V_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo33_reg: LDO33 {
+ regulator-name = "VTOUCH_LED_3.3V";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-ramp-delay = <12500>;
+ };
+
+ ldo34_reg: LDO34 {
+ regulator-name = "VCC_1.8V_MHL_AP";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <2100000>;
+ };
+
+ ldo35_reg: LDO35 {
+ regulator-name = "OIS_VM_2.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo36_reg: LDO36 {
+ regulator-name = "VSIL_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ ldo37_reg: LDO37 {
+ regulator-name = "VF_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo38_reg: LDO38 {
+ regulator-name = "VCC_3.0V_MOTOR_AP";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ ldo39_reg: LDO39 {
+ regulator-name = "V_HRM_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo40_reg: LDO40 {
+ regulator-name = "V_HRM_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "VDD_MIF_0.9V_AP";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "VDD_EGL_1.0V_AP";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "VDD_KFC_1.0V_AP";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "VDD_INT_0.95V_AP";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "VDD_DISP_CAM0_0.9V_AP";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ buck6_reg: BUCK6 {
+ regulator-name = "VDD_G3D_0.9V_AP";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ buck7_reg: BUCK7 {
+ regulator-name = "VDD_MEM1_1.2V_AP";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ buck8_reg: BUCK8 {
+ regulator-name = "VDD_LLDO_1.35V_AP";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ buck9_reg: BUCK9 {
+ regulator-name = "VDD_MLDO_2.0V_AP";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ buck10_reg: BUCK10 {
+ regulator-name = "vdd_mem2";
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&hsi2c_8 {
+ status = "okay";
+
+ max77843@66 {
+ compatible = "maxim,max77843";
+ interrupt-parent = <&gpa1>;
+ interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+ reg = <0x66>;
+
+ muic: max77843-muic {
+ compatible = "maxim,max77843-muic";
+ };
+
+ regulators {
+ compatible = "maxim,max77843-regulator";
+ safeout1_reg: SAFEOUT1 {
+ regulator-name = "SAFEOUT1";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <4950000>;
+ };
+
+ safeout2_reg: SAFEOUT2 {
+ regulator-name = "SAFEOUT2";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <4950000>;
+ };
+
+ charger_reg: CHARGER {
+ regulator-name = "CHARGER";
+ regulator-min-microamp = <100000>;
+ regulator-max-microamp = <3150000>;
+ };
+ };
+
+ haptic: max77843-haptic {
+ compatible = "maxim,max77843-haptic";
+ haptic-supply = <&ldo38_reg>;
+ pwms = <&pwm 0 33670 0>;
+ pwm-names = "haptic";
+ };
+ };
+};
+
+&i2s0 {
+ status = "okay";
+};
+
+&mshc_0 {
+ status = "okay";
+ num-slots = <1>;
+ mmc-hs200-1_8v;
+ mmc-hs400-1_8v;
+ cap-mmc-highspeed;
+ non-removable;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <0 4>;
+ samsung,dw-mshc-ddr-timing = <0 2>;
+ samsung,dw-mshc-hs400-timing = <0 3>;
+ samsung,read-strobe-delay = <90>;
+ fifo-depth = <0x80>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4
+ &sd0_bus8 &sd0_rdqs>;
+ bus-width = <8>;
+ assigned-clocks = <&cmu_top CLK_SCLK_MMC0_FSYS>;
+ assigned-clock-rates = <800000000>;
+};
+
+&mshc_2 {
+ status = "okay";
+ num-slots = <1>;
+ cap-sd-highspeed;
+ disable-wp;
+ cd-gpios = <&gpa2 4 GPIO_ACTIVE_HIGH>;
+ cd-inverted;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <0 4>;
+ samsung,dw-mshc-ddr-timing = <0 2>;
+ fifo-depth = <0x80>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>;
+ bus-width = <4>;
+};
+
+&ppmu_d0_general {
+ status = "okay";
+ events {
+ ppmu_event0_d0_general: ppmu-event0-d0-general {
+ event-name = "ppmu-event0-d0-general";
+ };
+ };
+};
+
+&ppmu_d1_general {
+ status = "okay";
+ events {
+ ppmu_event0_d1_general: ppmu-event0-d1-general {
+ event-name = "ppmu-event0-d1-general";
+ };
+ };
+};
+
+&pinctrl_alive {
+ pinctrl-names = "default";
+ pinctrl-0 = <&initial_alive>;
+
+ initial_alive: initial-state {
+ PIN(IN, gpa0-0, DOWN, LV1);
+ PIN(IN, gpa0-1, NONE, LV1);
+ PIN(IN, gpa0-2, DOWN, LV1);
+ PIN(IN, gpa0-3, NONE, LV1);
+ PIN(IN, gpa0-4, NONE, LV1);
+ PIN(IN, gpa0-5, DOWN, LV1);
+ PIN(IN, gpa0-6, NONE, LV1);
+ PIN(IN, gpa0-7, NONE, LV1);
+
+ PIN(IN, gpa1-0, UP, LV1);
+ PIN(IN, gpa1-1, NONE, LV1);
+ PIN(IN, gpa1-2, NONE, LV1);
+ PIN(IN, gpa1-3, DOWN, LV1);
+ PIN(IN, gpa1-4, DOWN, LV1);
+ PIN(IN, gpa1-5, NONE, LV1);
+ PIN(IN, gpa1-6, NONE, LV1);
+ PIN(IN, gpa1-7, NONE, LV1);
+
+ PIN(IN, gpa2-0, NONE, LV1);
+ PIN(IN, gpa2-1, NONE, LV1);
+ PIN(IN, gpa2-2, NONE, LV1);
+ PIN(IN, gpa2-3, DOWN, LV1);
+ PIN(IN, gpa2-4, NONE, LV1);
+ PIN(IN, gpa2-5, DOWN, LV1);
+ PIN(IN, gpa2-6, DOWN, LV1);
+ PIN(IN, gpa2-7, NONE, LV1);
+
+ PIN(IN, gpa3-0, DOWN, LV1);
+ PIN(IN, gpa3-1, DOWN, LV1);
+ PIN(IN, gpa3-2, NONE, LV1);
+ PIN(IN, gpa3-3, DOWN, LV1);
+ PIN(IN, gpa3-4, NONE, LV1);
+ PIN(IN, gpa3-5, DOWN, LV1);
+ PIN(IN, gpa3-6, DOWN, LV1);
+ PIN(IN, gpa3-7, DOWN, LV1);
+
+ PIN(IN, gpf1-0, NONE, LV1);
+ PIN(IN, gpf1-1, NONE, LV1);
+ PIN(IN, gpf1-2, DOWN, LV1);
+ PIN(IN, gpf1-4, UP, LV1);
+ PIN(OUT, gpf1-5, NONE, LV1);
+ PIN(IN, gpf1-6, DOWN, LV1);
+ PIN(IN, gpf1-7, DOWN, LV1);
+
+ PIN(IN, gpf2-0, DOWN, LV1);
+ PIN(IN, gpf2-1, DOWN, LV1);
+ PIN(IN, gpf2-2, DOWN, LV1);
+ PIN(IN, gpf2-3, DOWN, LV1);
+
+ PIN(IN, gpf3-0, DOWN, LV1);
+ PIN(IN, gpf3-1, DOWN, LV1);
+ PIN(IN, gpf3-2, NONE, LV1);
+ PIN(IN, gpf3-3, DOWN, LV1);
+
+ PIN(IN, gpf4-0, DOWN, LV1);
+ PIN(IN, gpf4-1, DOWN, LV1);
+ PIN(IN, gpf4-2, DOWN, LV1);
+ PIN(IN, gpf4-3, DOWN, LV1);
+ PIN(IN, gpf4-4, DOWN, LV1);
+ PIN(IN, gpf4-5, DOWN, LV1);
+ PIN(IN, gpf4-6, DOWN, LV1);
+ PIN(IN, gpf4-7, DOWN, LV1);
+
+ PIN(IN, gpf5-0, DOWN, LV1);
+ PIN(IN, gpf5-1, DOWN, LV1);
+ PIN(IN, gpf5-2, DOWN, LV1);
+ PIN(IN, gpf5-3, DOWN, LV1);
+ PIN(OUT, gpf5-4, NONE, LV1);
+ PIN(IN, gpf5-5, DOWN, LV1);
+ PIN(IN, gpf5-6, DOWN, LV1);
+ PIN(IN, gpf5-7, DOWN, LV1);
+ };
+
+ te_irq: te_irq {
+ samsung,pins = "gpf1-3";
+ samsung,pin-function = <0xf>;
+ };
+};
+
+&pinctrl_cpif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&initial_cpif>;
+
+ initial_cpif: initial-state {
+ PIN(IN, gpv6-0, DOWN, LV1);
+ PIN(IN, gpv6-1, DOWN, LV1);
+ };
+};
+
+&pinctrl_ese {
+ pinctrl-names = "default";
+ pinctrl-0 = <&initial_ese>;
+
+ initial_ese: initial-state {
+ PIN(IN, gpj2-0, DOWN, LV1);
+ PIN(IN, gpj2-1, DOWN, LV1);
+ PIN(IN, gpj2-2, DOWN, LV1);
+ };
+};
+
+&pinctrl_fsys {
+ pinctrl-names = "default";
+ pinctrl-0 = <&initial_fsys>;
+
+ initial_fsys: initial-state {
+ PIN(IN, gpr3-0, NONE, LV1);
+ PIN(IN, gpr3-1, DOWN, LV1);
+ PIN(IN, gpr3-2, DOWN, LV1);
+ PIN(IN, gpr3-3, DOWN, LV1);
+ PIN(IN, gpr3-7, NONE, LV1);
+ };
+};
+
+&pinctrl_imem {
+ pinctrl-names = "default";
+ pinctrl-0 = <&initial_imem>;
+
+ initial_imem: initial-state {
+ PIN(IN, gpf0-0, UP, LV1);
+ PIN(IN, gpf0-1, UP, LV1);
+ PIN(IN, gpf0-2, DOWN, LV1);
+ PIN(IN, gpf0-3, UP, LV1);
+ PIN(IN, gpf0-4, DOWN, LV1);
+ PIN(IN, gpf0-5, NONE, LV1);
+ PIN(IN, gpf0-6, DOWN, LV1);
+ PIN(IN, gpf0-7, UP, LV1);
+ };
+};
+
+&pinctrl_nfc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&initial_nfc>;
+
+ initial_nfc: initial-state {
+ PIN(IN, gpj0-2, DOWN, LV1);
+ };
+};
+
+&pinctrl_peric {
+ pinctrl-names = "default";
+ pinctrl-0 = <&initial_peric>;
+
+ initial_peric: initial-state {
+ PIN(IN, gpv7-0, DOWN, LV1);
+ PIN(IN, gpv7-1, DOWN, LV1);
+ PIN(IN, gpv7-2, NONE, LV1);
+ PIN(IN, gpv7-3, DOWN, LV1);
+ PIN(IN, gpv7-4, DOWN, LV1);
+ PIN(IN, gpv7-5, DOWN, LV1);
+
+ PIN(IN, gpb0-4, DOWN, LV1);
+
+ PIN(IN, gpc0-2, DOWN, LV1);
+ PIN(IN, gpc0-5, DOWN, LV1);
+ PIN(IN, gpc0-7, DOWN, LV1);
+
+ PIN(IN, gpc1-1, DOWN, LV1);
+
+ PIN(IN, gpc3-4, NONE, LV1);
+ PIN(IN, gpc3-5, NONE, LV1);
+ PIN(IN, gpc3-6, NONE, LV1);
+ PIN(IN, gpc3-7, NONE, LV1);
+
+ PIN(OUT, gpg0-0, NONE, LV1);
+ PIN(FUNC1, gpg0-1, DOWN, LV1);
+
+ PIN(IN, gpd2-5, DOWN, LV1);
+
+ PIN(IN, gpd4-0, NONE, LV1);
+ PIN(IN, gpd4-1, DOWN, LV1);
+ PIN(IN, gpd4-2, DOWN, LV1);
+ PIN(IN, gpd4-3, DOWN, LV1);
+ PIN(IN, gpd4-4, DOWN, LV1);
+
+ PIN(IN, gpd6-3, DOWN, LV1);
+
+ PIN(IN, gpd8-1, UP, LV1);
+
+ PIN(IN, gpg1-0, DOWN, LV1);
+ PIN(IN, gpg1-1, DOWN, LV1);
+ PIN(IN, gpg1-2, DOWN, LV1);
+ PIN(IN, gpg1-3, DOWN, LV1);
+ PIN(IN, gpg1-4, DOWN, LV1);
+
+ PIN(IN, gpg2-0, DOWN, LV1);
+ PIN(IN, gpg2-1, DOWN, LV1);
+
+ PIN(IN, gpg3-0, DOWN, LV1);
+ PIN(IN, gpg3-1, DOWN, LV1);
+ PIN(IN, gpg3-5, DOWN, LV1);
+ PIN(IN, gpg3-7, DOWN, LV1);
+ };
+};
+
+&pinctrl_touch {
+ pinctrl-names = "default";
+ pinctrl-0 = <&initial_touch>;
+
+ initial_touch: initial-state {
+ PIN(IN, gpj1-2, DOWN, LV1);
+ };
+};
+
+&pwm {
+ pinctrl-0 = <&pwm0_out>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&mic {
+ status = "okay";
+
+ i80-if-timings {
+ };
+};
+
+&pmu_system_controller {
+ assigned-clocks = <&pmu_system_controller 0>;
+ assigned-clock-parents = <&xxti>;
+};
+
+&serial_1 {
+ status = "okay";
+};
+
+&spi_1 {
+ cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+
+ wm5110: wm5110-codec@0 {
+ compatible = "wlf,wm5110";
+ reg = <0x0>;
+ spi-max-frequency = <20000000>;
+ interrupt-parent = <&gpa0>;
+ interrupts = <4 IRQ_TYPE_NONE>;
+ clocks = <&pmu_system_controller 0>,
+ <&s2mps13_osc S2MPS11_CLK_BT>;
+ clock-names = "mclk1", "mclk2";
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ wlf,micd-detect-debounce = <300>;
+ wlf,micd-bias-start-time = <0x1>;
+ wlf,micd-rate = <0x7>;
+ wlf,micd-dbtime = <0x1>;
+ wlf,micd-force-micbias;
+ wlf,micd-configs = <0x0 1 0>;
+ wlf,hpdet-channel = <1>;
+ wlf,gpsw = <0x1>;
+ wlf,inmode = <2 0 2 0>;
+
+ wlf,reset = <&gpc0 7 GPIO_ACTIVE_HIGH>;
+ wlf,ldoena = <&gpf0 0 GPIO_ACTIVE_HIGH>;
+
+ /* core supplies */
+ AVDD-supply = <&ldo18_reg>;
+ DBVDD1-supply = <&ldo18_reg>;
+ CPVDD-supply = <&ldo18_reg>;
+ DBVDD2-supply = <&ldo18_reg>;
+ DBVDD3-supply = <&ldo18_reg>;
+
+ controller-data {
+ samsung,spi-feedback-delay = <0>;
+ };
+ };
+};
+
+&timer {
+ clock-frequency = <24000000>;
+};
+
+&tmu_atlas0 {
+ vtmu-supply = <&ldo3_reg>;
+ status = "okay";
+};
+
+&tmu_apollo {
+ vtmu-supply = <&ldo3_reg>;
+ status = "okay";
+};
+
+&tmu_g3d {
+ vtmu-supply = <&ldo3_reg>;
+ status = "okay";
+};
+
+&usbdrd30 {
+ vdd33-supply = <&ldo10_reg>;
+ vdd10-supply = <&ldo6_reg>;
+ status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+ dr_mode = "otg";
+};
+
+&usbdrd30_phy {
+ vbus-supply = <&safeout1_reg>;
+ status = "okay";
+};
+
+&xxti {
+ clock-frequency = <24000000>;
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
dissimilarity index 98%
index 4e6619c..aa8584a 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
@@ -1,1119 +1,19 @@
-/*
- * SAMSUNG Exynos5433 TM2 board device tree source
- *
- * Copyright (c) 2016 Samsung Electronics Co., Ltd.
- *
- * Device tree source file for Samsung's TM2 board which is based on
- * Samsung Exynos5433 SoC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/dts-v1/;
-#include "exynos5433.dtsi"
-#include <dt-bindings/clock/samsung,s2mps11.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
- model = "Samsung TM2 board";
- compatible = "samsung,tm2", "samsung,exynos5433";
-
- aliases {
- gsc0 = &gsc_0;
- gsc1 = &gsc_1;
- gsc2 = &gsc_2;
- pinctrl0 = &pinctrl_alive;
- pinctrl1 = &pinctrl_aud;
- pinctrl2 = &pinctrl_cpif;
- pinctrl3 = &pinctrl_ese;
- pinctrl4 = &pinctrl_finger;
- pinctrl5 = &pinctrl_fsys;
- pinctrl6 = &pinctrl_imem;
- pinctrl7 = &pinctrl_nfc;
- pinctrl8 = &pinctrl_peric;
- pinctrl9 = &pinctrl_touch;
- serial0 = &serial_0;
- serial1 = &serial_1;
- serial2 = &serial_2;
- serial3 = &serial_3;
- spi0 = &spi_0;
- spi1 = &spi_1;
- spi2 = &spi_2;
- spi3 = &spi_3;
- spi4 = &spi_4;
- mshc0 = &mshc_0;
- mshc2 = &mshc_2;
- };
-
- chosen {
- stdout-path = &serial_1;
- };
-
- memory@20000000 {
- device_type = "memory";
- reg = <0x0 0x20000000 0x0 0xc0000000>;
- };
-
- gpio-keys {
- compatible = "gpio-keys";
-
- power-key {
- gpios = <&gpa2 7 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_POWER>;
- label = "power key";
- debounce-interval = <10>;
- };
-
- volume-up-key {
- gpios = <&gpa2 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_VOLUMEUP>;
- label = "volume-up key";
- debounce-interval = <10>;
- };
-
- volume-down-key {
- gpios = <&gpa2 1 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_VOLUMEDOWN>;
- label = "volume-down key";
- debounce-interval = <10>;
- };
-
- homepage-key {
- gpios = <&gpa0 3 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_MENU>;
- label = "homepage key";
- debounce-interval = <10>;
- };
- };
-
- i2c_max98504: i2c-gpio-0 {
- compatible = "i2c-gpio";
- gpios = <&gpd0 1 GPIO_ACTIVE_HIGH /* SPK_AMP_SDA */
- &gpd0 0 GPIO_ACTIVE_HIGH /* SPK_AMP_SCL */ >;
- i2c-gpio,delay-us = <2>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "okay";
-
- max98504: max98504@31 {
- compatible = "maxim,max98504";
- reg = <0x31>;
- maxim,rx-path = <1>;
- maxim,tx-path = <1>;
- maxim,tx-channel-mask = <3>;
- maxim,tx-channel-source = <2>;
- };
- };
-
- sound {
- compatible = "samsung,tm2-audio";
- audio-codec = <&wm5110>;
- i2s-controller = <&i2s0>;
- audio-amplifier = <&max98504>;
- mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>;
- model = "wm5110";
- samsung,audio-routing =
- /* Headphone */
- "HP", "HPOUT1L",
- "HP", "HPOUT1R",
-
- /* Speaker */
- "SPK", "SPKOUT",
- "SPKOUT", "HPOUT2L",
- "SPKOUT", "HPOUT2R",
-
- /* Receiver */
- "RCV", "HPOUT3L",
- "RCV", "HPOUT3R";
- status = "okay";
- };
-};
-
-&adc {
- vdd-supply = <&ldo3_reg>;
- status = "okay";
-
- thermistor-ap {
- compatible = "murata,ncp03wf104";
- pullup-uv = <1800000>;
- pullup-ohm = <100000>;
- pulldown-ohm = <0>;
- io-channels = <&adc 0>;
- };
-
- thermistor-battery {
- compatible = "murata,ncp03wf104";
- pullup-uv = <1800000>;
- pullup-ohm = <100000>;
- pulldown-ohm = <0>;
- io-channels = <&adc 1>;
- #thermal-sensor-cells = <0>;
- };
-
- thermistor-charger {
- compatible = "murata,ncp03wf104";
- pullup-uv = <1800000>;
- pullup-ohm = <100000>;
- pulldown-ohm = <0>;
- io-channels = <&adc 2>;
- };
-};
-
-&bus_g2d_400 {
- devfreq-events = <&ppmu_event0_d0_general>, <&ppmu_event0_d1_general>;
- vdd-supply = <&buck4_reg>;
- exynos,saturation-ratio = <10>;
- status = "okay";
-};
-
-&bus_g2d_266 {
- devfreq = <&bus_g2d_400>;
- status = "okay";
-};
-
-&bus_gscl {
- devfreq = <&bus_g2d_400>;
- status = "okay";
-};
-
-&bus_hevc {
- devfreq = <&bus_g2d_400>;
- status = "okay";
-};
-
-&bus_jpeg {
- devfreq = <&bus_g2d_400>;
- status = "okay";
-};
-
-&bus_mfc {
- devfreq = <&bus_g2d_400>;
- status = "okay";
-};
-
-&bus_mscl {
- devfreq = <&bus_g2d_400>;
- status = "okay";
-};
-
-&bus_noc0 {
- devfreq = <&bus_g2d_400>;
- status = "okay";
-};
-
-&bus_noc1 {
- devfreq = <&bus_g2d_400>;
- status = "okay";
-};
-
-&bus_noc2 {
- devfreq = <&bus_g2d_400>;
- status = "okay";
-};
-
-&cmu_aud {
- assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>;
- assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>;
-};
-
-&cmu_fsys {
- assigned-clocks = <&cmu_top CLK_MOUT_SCLK_USBDRD30>,
- <&cmu_top CLK_MOUT_SCLK_USBHOST30>,
- <&cmu_fsys CLK_MOUT_SCLK_USBDRD30_USER>,
- <&cmu_fsys CLK_MOUT_SCLK_USBHOST30_USER>,
- <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_USER>,
- <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_USER>,
- <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_USER>,
- <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_USER>,
- <&cmu_top CLK_DIV_SCLK_USBDRD30>,
- <&cmu_top CLK_DIV_SCLK_USBHOST30>;
- assigned-clock-parents = <&cmu_top CLK_MOUT_BUS_PLL_USER>,
- <&cmu_top CLK_MOUT_BUS_PLL_USER>,
- <&cmu_top CLK_SCLK_USBDRD30_FSYS>,
- <&cmu_top CLK_SCLK_USBHOST30_FSYS>,
- <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_PHY>,
- <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_PHY>,
- <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_PHY>,
- <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_PHY>;
- assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>,
- <66700000>, <66700000>;
-};
-
-&cmu_gscl {
- assigned-clocks = <&cmu_gscl CLK_MOUT_ACLK_GSCL_111_USER>,
- <&cmu_gscl CLK_MOUT_ACLK_GSCL_333_USER>;
- assigned-clock-parents = <&cmu_top CLK_ACLK_GSCL_111>,
- <&cmu_top CLK_ACLK_GSCL_333>;
-};
-
-&cmu_mfc {
- assigned-clocks = <&cmu_mfc CLK_MOUT_ACLK_MFC_400_USER>;
- assigned-clock-parents = <&cmu_top CLK_ACLK_MFC_400>;
-};
-
-&cmu_mscl {
- assigned-clocks = <&cmu_mscl CLK_MOUT_ACLK_MSCL_400_USER>,
- <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>,
- <&cmu_mscl CLK_MOUT_SCLK_JPEG>,
- <&cmu_top CLK_MOUT_SCLK_JPEG_A>;
- assigned-clock-parents = <&cmu_top CLK_ACLK_MSCL_400>,
- <&cmu_top CLK_SCLK_JPEG_MSCL>,
- <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>,
- <&cmu_top CLK_MOUT_BUS_PLL_USER>;
-};
-
-&cpu0 {
- cpu-supply = <&buck3_reg>;
-};
-
-&cpu4 {
- cpu-supply = <&buck2_reg>;
-};
-
-&decon {
- status = "okay";
-
- i80-if-timings {
- };
-};
-
-&dsi {
- status = "okay";
- vddcore-supply = <&ldo6_reg>;
- vddio-supply = <&ldo7_reg>;
- samsung,pll-clock-frequency = <24000000>;
- pinctrl-names = "default";
- pinctrl-0 = <&te_irq>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@1 {
- reg = <1>;
-
- dsi_out: endpoint {
- samsung,burst-clock-frequency = <512000000>;
- samsung,esc-clock-frequency = <16000000>;
- };
- };
- };
-};
-
-&hsi2c_0 {
- status = "okay";
- clock-frequency = <2500000>;
-
- s2mps13-pmic@66 {
- compatible = "samsung,s2mps13-pmic";
- interrupt-parent = <&gpa0>;
- interrupts = <7 IRQ_TYPE_NONE>;
- reg = <0x66>;
- samsung,s2mps11-wrstbi-ground;
-
- s2mps13_osc: clocks {
- compatible = "samsung,s2mps13-clk";
- #clock-cells = <1>;
- clock-output-names = "s2mps13_ap", "s2mps13_cp",
- "s2mps13_bt";
- };
-
- regulators {
- ldo1_reg: LDO1 {
- regulator-name = "VDD_ALIVE_0.9V_AP";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <900000>;
- regulator-always-on;
- };
-
- ldo2_reg: LDO2 {
- regulator-name = "VDDQ_MMC2_2.8V_AP";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- ldo3_reg: LDO3 {
- regulator-name = "VDD1_E_1.8V_AP";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo4_reg: LDO4 {
- regulator-name = "VDD10_MIF_PLL_1.0V_AP";
- regulator-min-microvolt = <1300000>;
- regulator-max-microvolt = <1300000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- ldo5_reg: LDO5 {
- regulator-name = "VDD10_DPLL_1.0V_AP";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- ldo6_reg: LDO6 {
- regulator-name = "VDD10_MIPI2L_1.0V_AP";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- ldo7_reg: LDO7 {
- regulator-name = "VDD18_MIPI2L_1.8V_AP";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo8_reg: LDO8 {
- regulator-name = "VDD18_LLI_1.8V_AP";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- ldo9_reg: LDO9 {
- regulator-name = "VDD18_ABB_ETC_1.8V_AP";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- ldo10_reg: LDO10 {
- regulator-name = "VDD33_USB30_3.0V_AP";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- ldo11_reg: LDO11 {
- regulator-name = "VDD_INT_M_1.0V_AP";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- ldo12_reg: LDO12 {
- regulator-name = "VDD_KFC_M_1.1V_AP";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- };
-
- ldo13_reg: LDO13 {
- regulator-name = "VDD_G3D_M_0.95V_AP";
- regulator-min-microvolt = <950000>;
- regulator-max-microvolt = <950000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- ldo14_reg: LDO14 {
- regulator-name = "VDDQ_M1_LDO_1.2V_AP";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- ldo15_reg: LDO15 {
- regulator-name = "VDDQ_M2_LDO_1.2V_AP";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- ldo16_reg: LDO16 {
- regulator-name = "VDDQ_EFUSE";
- regulator-min-microvolt = <1400000>;
- regulator-max-microvolt = <3400000>;
- regulator-always-on;
- };
-
- ldo17_reg: LDO17 {
- regulator-name = "V_TFLASH_2.8V_AP";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
-
- ldo18_reg: LDO18 {
- regulator-name = "V_CODEC_1.8V_AP";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo19_reg: LDO19 {
- regulator-name = "VDDA_1.8V_COMP";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo20_reg: LDO20 {
- regulator-name = "VCC_2.8V_AP";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- };
-
- ldo21_reg: LDO21 {
- regulator-name = "VT_CAM_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo22_reg: LDO22 {
- regulator-name = "CAM_IO_1.8V_AP";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo23_reg: LDO23 {
- regulator-name = "CAM_SEN_CORE_1.2V_AP";
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1200000>;
- };
-
- ldo24_reg: LDO24 {
- regulator-name = "VT_CAM_1.2V";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- ldo25_reg: LDO25 {
- regulator-name = "CAM_SEN_A2.8V_AP";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
-
- ldo26_reg: LDO26 {
- regulator-name = "CAM_AF_2.8V_AP";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
-
- ldo27_reg: LDO27 {
- regulator-name = "VCC_3.0V_LCD_AP";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- };
-
- ldo28_reg: LDO28 {
- regulator-name = "VCC_1.8V_LCD_AP";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo29_reg: LDO29 {
- regulator-name = "VT_CAM_2.8V";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- };
-
- ldo30_reg: LDO30 {
- regulator-name = "TSP_AVDD_3.3V_AP";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- ldo31_reg: LDO31 {
- regulator-name = "TSP_VDD_1.85V_AP";
- regulator-min-microvolt = <1850000>;
- regulator-max-microvolt = <1850000>;
- };
-
- ldo32_reg: LDO32 {
- regulator-name = "VTOUCH_1.8V_AP";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo33_reg: LDO33 {
- regulator-name = "VTOUCH_LED_3.3V";
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <3300000>;
- regulator-ramp-delay = <12500>;
- };
-
- ldo34_reg: LDO34 {
- regulator-name = "VCC_1.8V_MHL_AP";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <2100000>;
- };
-
- ldo35_reg: LDO35 {
- regulator-name = "OIS_VM_2.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2800000>;
- };
-
- ldo36_reg: LDO36 {
- regulator-name = "VSIL_1.0V";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- };
-
- ldo37_reg: LDO37 {
- regulator-name = "VF_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo38_reg: LDO38 {
- regulator-name = "VCC_3.0V_MOTOR_AP";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- };
-
- ldo39_reg: LDO39 {
- regulator-name = "V_HRM_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo40_reg: LDO40 {
- regulator-name = "V_HRM_3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- buck1_reg: BUCK1 {
- regulator-name = "VDD_MIF_0.9V_AP";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- buck2_reg: BUCK2 {
- regulator-name = "VDD_EGL_1.0V_AP";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1300000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- buck3_reg: BUCK3 {
- regulator-name = "VDD_KFC_1.0V_AP";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- buck4_reg: BUCK4 {
- regulator-name = "VDD_INT_0.95V_AP";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- buck5_reg: BUCK5 {
- regulator-name = "VDD_DISP_CAM0_0.9V_AP";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- buck6_reg: BUCK6 {
- regulator-name = "VDD_G3D_0.9V_AP";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- buck7_reg: BUCK7 {
- regulator-name = "VDD_MEM1_1.2V_AP";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- };
-
- buck8_reg: BUCK8 {
- regulator-name = "VDD_LLDO_1.35V_AP";
- regulator-min-microvolt = <1350000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- buck9_reg: BUCK9 {
- regulator-name = "VDD_MLDO_2.0V_AP";
- regulator-min-microvolt = <1350000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- buck10_reg: BUCK10 {
- regulator-name = "vdd_mem2";
- regulator-min-microvolt = <550000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- };
- };
- };
-};
-
-&hsi2c_8 {
- status = "okay";
-
- max77843@66 {
- compatible = "maxim,max77843";
- interrupt-parent = <&gpa1>;
- interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
- reg = <0x66>;
-
- muic: max77843-muic {
- compatible = "maxim,max77843-muic";
- };
-
- regulators {
- compatible = "maxim,max77843-regulator";
- safeout1_reg: SAFEOUT1 {
- regulator-name = "SAFEOUT1";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <4950000>;
- };
-
- safeout2_reg: SAFEOUT2 {
- regulator-name = "SAFEOUT2";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <4950000>;
- };
-
- charger_reg: CHARGER {
- regulator-name = "CHARGER";
- regulator-min-microamp = <100000>;
- regulator-max-microamp = <3150000>;
- };
- };
-
- haptic: max77843-haptic {
- compatible = "maxim,max77843-haptic";
- haptic-supply = <&ldo38_reg>;
- pwms = <&pwm 0 33670 0>;
- pwm-names = "haptic";
- };
- };
-};
-
-&i2s0 {
- status = "okay";
-};
-
-&mshc_0 {
- status = "okay";
- num-slots = <1>;
- mmc-hs200-1_8v;
- mmc-hs400-1_8v;
- cap-mmc-highspeed;
- non-removable;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <0 4>;
- samsung,dw-mshc-ddr-timing = <0 2>;
- samsung,dw-mshc-hs400-timing = <0 3>;
- samsung,read-strobe-delay = <90>;
- fifo-depth = <0x80>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4
- &sd0_bus8 &sd0_rdqs>;
- bus-width = <8>;
- assigned-clocks = <&cmu_top CLK_SCLK_MMC0_FSYS>;
- assigned-clock-rates = <800000000>;
-};
-
-&mshc_2 {
- status = "okay";
- num-slots = <1>;
- cap-sd-highspeed;
- disable-wp;
- cd-gpios = <&gpa2 4 GPIO_ACTIVE_HIGH>;
- cd-inverted;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <0 4>;
- samsung,dw-mshc-ddr-timing = <0 2>;
- fifo-depth = <0x80>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>;
- bus-width = <4>;
-};
-
-&ppmu_d0_general {
- status = "okay";
- events {
- ppmu_event0_d0_general: ppmu-event0-d0-general {
- event-name = "ppmu-event0-d0-general";
- };
- };
-};
-
-&ppmu_d1_general {
- status = "okay";
- events {
- ppmu_event0_d1_general: ppmu-event0-d1-general {
- event-name = "ppmu-event0-d1-general";
- };
- };
-};
-
-&pinctrl_alive {
- pinctrl-names = "default";
- pinctrl-0 = <&initial_alive>;
-
- initial_alive: initial-state {
- PIN(IN, gpa0-0, DOWN, LV1);
- PIN(IN, gpa0-1, NONE, LV1);
- PIN(IN, gpa0-2, DOWN, LV1);
- PIN(IN, gpa0-3, NONE, LV1);
- PIN(IN, gpa0-4, NONE, LV1);
- PIN(IN, gpa0-5, DOWN, LV1);
- PIN(IN, gpa0-6, NONE, LV1);
- PIN(IN, gpa0-7, NONE, LV1);
-
- PIN(IN, gpa1-0, UP, LV1);
- PIN(IN, gpa1-1, NONE, LV1);
- PIN(IN, gpa1-2, NONE, LV1);
- PIN(IN, gpa1-3, DOWN, LV1);
- PIN(IN, gpa1-4, DOWN, LV1);
- PIN(IN, gpa1-5, NONE, LV1);
- PIN(IN, gpa1-6, NONE, LV1);
- PIN(IN, gpa1-7, NONE, LV1);
-
- PIN(IN, gpa2-0, NONE, LV1);
- PIN(IN, gpa2-1, NONE, LV1);
- PIN(IN, gpa2-2, NONE, LV1);
- PIN(IN, gpa2-3, DOWN, LV1);
- PIN(IN, gpa2-4, NONE, LV1);
- PIN(IN, gpa2-5, DOWN, LV1);
- PIN(IN, gpa2-6, DOWN, LV1);
- PIN(IN, gpa2-7, NONE, LV1);
-
- PIN(IN, gpa3-0, DOWN, LV1);
- PIN(IN, gpa3-1, DOWN, LV1);
- PIN(IN, gpa3-2, NONE, LV1);
- PIN(IN, gpa3-3, DOWN, LV1);
- PIN(IN, gpa3-4, NONE, LV1);
- PIN(IN, gpa3-5, DOWN, LV1);
- PIN(IN, gpa3-6, DOWN, LV1);
- PIN(IN, gpa3-7, DOWN, LV1);
-
- PIN(IN, gpf1-0, NONE, LV1);
- PIN(IN, gpf1-1, NONE, LV1);
- PIN(IN, gpf1-2, DOWN, LV1);
- PIN(IN, gpf1-4, UP, LV1);
- PIN(OUT, gpf1-5, NONE, LV1);
- PIN(IN, gpf1-6, DOWN, LV1);
- PIN(IN, gpf1-7, DOWN, LV1);
-
- PIN(IN, gpf2-0, DOWN, LV1);
- PIN(IN, gpf2-1, DOWN, LV1);
- PIN(IN, gpf2-2, DOWN, LV1);
- PIN(IN, gpf2-3, DOWN, LV1);
-
- PIN(IN, gpf3-0, DOWN, LV1);
- PIN(IN, gpf3-1, DOWN, LV1);
- PIN(IN, gpf3-2, NONE, LV1);
- PIN(IN, gpf3-3, DOWN, LV1);
-
- PIN(IN, gpf4-0, DOWN, LV1);
- PIN(IN, gpf4-1, DOWN, LV1);
- PIN(IN, gpf4-2, DOWN, LV1);
- PIN(IN, gpf4-3, DOWN, LV1);
- PIN(IN, gpf4-4, DOWN, LV1);
- PIN(IN, gpf4-5, DOWN, LV1);
- PIN(IN, gpf4-6, DOWN, LV1);
- PIN(IN, gpf4-7, DOWN, LV1);
-
- PIN(IN, gpf5-0, DOWN, LV1);
- PIN(IN, gpf5-1, DOWN, LV1);
- PIN(IN, gpf5-2, DOWN, LV1);
- PIN(IN, gpf5-3, DOWN, LV1);
- PIN(OUT, gpf5-4, NONE, LV1);
- PIN(IN, gpf5-5, DOWN, LV1);
- PIN(IN, gpf5-6, DOWN, LV1);
- PIN(IN, gpf5-7, DOWN, LV1);
- };
-
- te_irq: te_irq {
- samsung,pins = "gpf1-3";
- samsung,pin-function = <0xf>;
- };
-};
-
-&pinctrl_cpif {
- pinctrl-names = "default";
- pinctrl-0 = <&initial_cpif>;
-
- initial_cpif: initial-state {
- PIN(IN, gpv6-0, DOWN, LV1);
- PIN(IN, gpv6-1, DOWN, LV1);
- };
-};
-
-&pinctrl_ese {
- pinctrl-names = "default";
- pinctrl-0 = <&initial_ese>;
-
- initial_ese: initial-state {
- PIN(IN, gpj2-0, DOWN, LV1);
- PIN(IN, gpj2-1, DOWN, LV1);
- PIN(IN, gpj2-2, DOWN, LV1);
- };
-};
-
-&pinctrl_fsys {
- pinctrl-names = "default";
- pinctrl-0 = <&initial_fsys>;
-
- initial_fsys: initial-state {
- PIN(IN, gpr3-0, NONE, LV1);
- PIN(IN, gpr3-1, DOWN, LV1);
- PIN(IN, gpr3-2, DOWN, LV1);
- PIN(IN, gpr3-3, DOWN, LV1);
- PIN(IN, gpr3-7, NONE, LV1);
- };
-};
-
-&pinctrl_imem {
- pinctrl-names = "default";
- pinctrl-0 = <&initial_imem>;
-
- initial_imem: initial-state {
- PIN(IN, gpf0-0, UP, LV1);
- PIN(IN, gpf0-1, UP, LV1);
- PIN(IN, gpf0-2, DOWN, LV1);
- PIN(IN, gpf0-3, UP, LV1);
- PIN(IN, gpf0-4, DOWN, LV1);
- PIN(IN, gpf0-5, NONE, LV1);
- PIN(IN, gpf0-6, DOWN, LV1);
- PIN(IN, gpf0-7, UP, LV1);
- };
-};
-
-&pinctrl_nfc {
- pinctrl-names = "default";
- pinctrl-0 = <&initial_nfc>;
-
- initial_nfc: initial-state {
- PIN(IN, gpj0-2, DOWN, LV1);
- };
-};
-
-&pinctrl_peric {
- pinctrl-names = "default";
- pinctrl-0 = <&initial_peric>;
-
- initial_peric: initial-state {
- PIN(IN, gpv7-0, DOWN, LV1);
- PIN(IN, gpv7-1, DOWN, LV1);
- PIN(IN, gpv7-2, NONE, LV1);
- PIN(IN, gpv7-3, DOWN, LV1);
- PIN(IN, gpv7-4, DOWN, LV1);
- PIN(IN, gpv7-5, DOWN, LV1);
-
- PIN(IN, gpb0-4, DOWN, LV1);
-
- PIN(IN, gpc0-2, DOWN, LV1);
- PIN(IN, gpc0-5, DOWN, LV1);
- PIN(IN, gpc0-7, DOWN, LV1);
-
- PIN(IN, gpc1-1, DOWN, LV1);
-
- PIN(IN, gpc3-4, NONE, LV1);
- PIN(IN, gpc3-5, NONE, LV1);
- PIN(IN, gpc3-6, NONE, LV1);
- PIN(IN, gpc3-7, NONE, LV1);
-
- PIN(OUT, gpg0-0, NONE, LV1);
- PIN(FUNC1, gpg0-1, DOWN, LV1);
-
- PIN(IN, gpd2-5, DOWN, LV1);
-
- PIN(IN, gpd4-0, NONE, LV1);
- PIN(IN, gpd4-1, DOWN, LV1);
- PIN(IN, gpd4-2, DOWN, LV1);
- PIN(IN, gpd4-3, DOWN, LV1);
- PIN(IN, gpd4-4, DOWN, LV1);
-
- PIN(IN, gpd6-3, DOWN, LV1);
-
- PIN(IN, gpd8-1, UP, LV1);
-
- PIN(IN, gpg1-0, DOWN, LV1);
- PIN(IN, gpg1-1, DOWN, LV1);
- PIN(IN, gpg1-2, DOWN, LV1);
- PIN(IN, gpg1-3, DOWN, LV1);
- PIN(IN, gpg1-4, DOWN, LV1);
-
- PIN(IN, gpg2-0, DOWN, LV1);
- PIN(IN, gpg2-1, DOWN, LV1);
-
- PIN(IN, gpg3-0, DOWN, LV1);
- PIN(IN, gpg3-1, DOWN, LV1);
- PIN(IN, gpg3-5, DOWN, LV1);
- PIN(IN, gpg3-7, DOWN, LV1);
- };
-};
-
-&pinctrl_touch {
- pinctrl-names = "default";
- pinctrl-0 = <&initial_touch>;
-
- initial_touch: initial-state {
- PIN(IN, gpj1-2, DOWN, LV1);
- };
-};
-
-&pwm {
- pinctrl-0 = <&pwm0_out>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&mic {
- status = "okay";
-
- i80-if-timings {
- };
-};
-
-&pmu_system_controller {
- assigned-clocks = <&pmu_system_controller 0>;
- assigned-clock-parents = <&xxti>;
-};
-
-&serial_1 {
- status = "okay";
-};
-
-&spi_1 {
- cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>;
- status = "okay";
-
- wm5110: wm5110-codec@0 {
- compatible = "wlf,wm5110";
- reg = <0x0>;
- spi-max-frequency = <20000000>;
- interrupt-parent = <&gpa0>;
- interrupts = <4 IRQ_TYPE_NONE>;
- clocks = <&pmu_system_controller 0>,
- <&s2mps13_osc S2MPS11_CLK_BT>;
- clock-names = "mclk1", "mclk2";
-
- gpio-controller;
- #gpio-cells = <2>;
-
- wlf,micd-detect-debounce = <300>;
- wlf,micd-bias-start-time = <0x1>;
- wlf,micd-rate = <0x7>;
- wlf,micd-dbtime = <0x1>;
- wlf,micd-force-micbias;
- wlf,micd-configs = <0x0 1 0>;
- wlf,hpdet-channel = <1>;
- wlf,gpsw = <0x1>;
- wlf,inmode = <2 0 2 0>;
-
- wlf,reset = <&gpc0 7 GPIO_ACTIVE_HIGH>;
- wlf,ldoena = <&gpf0 0 GPIO_ACTIVE_HIGH>;
-
- /* core supplies */
- AVDD-supply = <&ldo18_reg>;
- DBVDD1-supply = <&ldo18_reg>;
- CPVDD-supply = <&ldo18_reg>;
- DBVDD2-supply = <&ldo18_reg>;
- DBVDD3-supply = <&ldo18_reg>;
-
- controller-data {
- samsung,spi-feedback-delay = <0>;
- };
- };
-};
-
-&timer {
- clock-frequency = <24000000>;
-};
-
-&tmu_atlas0 {
- vtmu-supply = <&ldo3_reg>;
- status = "okay";
-};
-
-&tmu_apollo {
- vtmu-supply = <&ldo3_reg>;
- status = "okay";
-};
-
-&tmu_g3d {
- vtmu-supply = <&ldo3_reg>;
- status = "okay";
-};
-
-&usbdrd30 {
- vdd33-supply = <&ldo10_reg>;
- vdd10-supply = <&ldo6_reg>;
- status = "okay";
-};
-
-&usbdrd_dwc3_0 {
- dr_mode = "otg";
-};
-
-&usbdrd30_phy {
- vbus-supply = <&safeout1_reg>;
- status = "okay";
-};
-
-&xxti {
- clock-frequency = <24000000>;
-};
+/*
+ * SAMSUNG Exynos5433 TM2 board device tree source
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ *
+ * Device tree source file for Samsung's TM2 board which is based on
+ * Samsung Exynos5433 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "exynos5433-tm2-common.dtsi"
+
+/ {
+ model = "Samsung TM2 board";
+ compatible = "samsung,tm2", "samsung,exynos5433";
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
index 1db4e7f..81fdbef 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
@@ -11,7 +11,7 @@
* published by the Free Software Foundation.
*/
-#include "exynos5433-tm2.dts"
+#include "exynos5433-tm2-common.dtsi"
/ {
model = "Samsung TM2E board";
--
2.7.4
^ permalink raw reply related [flat|nested] 33+ messages in thread* [PATCH v2 3/4] arm64: dts: exynos: make tm2 and tm2e independent from each other
@ 2017-01-05 8:27 ` Jaechul Lee
0 siblings, 0 replies; 33+ messages in thread
From: Jaechul Lee @ 2017-01-05 8:27 UTC (permalink / raw)
To: linux-arm-kernel
From: Andi Shyti <andi.shyti@samsung.com>
Currently tm2e dts includes tm2 but there are some differences
between the two boards and tm2 has some properties that tm2e
doesn't have.
That's why it's important to keep the two dts files independent
and put all the commonalities in a tm2-common.dtsi file.
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com>
---
.../boot/dts/exynos/exynos5433-tm2-common.dtsi | 1116 +++++++++++++++++++
arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 1138 +-------------------
arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts | 2 +-
3 files changed, 1136 insertions(+), 1120 deletions(-)
create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
rewrite arch/arm64/boot/dts/exynos/exynos5433-tm2.dts (98%)
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
new file mode 100644
index 0000000..7ad0019
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
@@ -0,0 +1,1116 @@
+/*
+ * SAMSUNG Exynos5433 TM2 board device tree source
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ *
+ * Device tree source file for Samsung's TM2 board which is based on
+ * Samsung Exynos5433 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include "exynos5433.dtsi"
+#include <dt-bindings/clock/samsung,s2mps11.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ aliases {
+ gsc0 = &gsc_0;
+ gsc1 = &gsc_1;
+ gsc2 = &gsc_2;
+ pinctrl0 = &pinctrl_alive;
+ pinctrl1 = &pinctrl_aud;
+ pinctrl2 = &pinctrl_cpif;
+ pinctrl3 = &pinctrl_ese;
+ pinctrl4 = &pinctrl_finger;
+ pinctrl5 = &pinctrl_fsys;
+ pinctrl6 = &pinctrl_imem;
+ pinctrl7 = &pinctrl_nfc;
+ pinctrl8 = &pinctrl_peric;
+ pinctrl9 = &pinctrl_touch;
+ serial0 = &serial_0;
+ serial1 = &serial_1;
+ serial2 = &serial_2;
+ serial3 = &serial_3;
+ spi0 = &spi_0;
+ spi1 = &spi_1;
+ spi2 = &spi_2;
+ spi3 = &spi_3;
+ spi4 = &spi_4;
+ mshc0 = &mshc_0;
+ mshc2 = &mshc_2;
+ };
+
+ chosen {
+ stdout-path = &serial_1;
+ };
+
+ memory at 20000000 {
+ device_type = "memory";
+ reg = <0x0 0x20000000 0x0 0xc0000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ power-key {
+ gpios = <&gpa2 7 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ label = "power key";
+ debounce-interval = <10>;
+ };
+
+ volume-up-key {
+ gpios = <&gpa2 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ label = "volume-up key";
+ debounce-interval = <10>;
+ };
+
+ volume-down-key {
+ gpios = <&gpa2 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ label = "volume-down key";
+ debounce-interval = <10>;
+ };
+
+ homepage-key {
+ gpios = <&gpa0 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_MENU>;
+ label = "homepage key";
+ debounce-interval = <10>;
+ };
+ };
+
+ i2c_max98504: i2c-gpio-0 {
+ compatible = "i2c-gpio";
+ gpios = <&gpd0 1 GPIO_ACTIVE_HIGH /* SPK_AMP_SDA */
+ &gpd0 0 GPIO_ACTIVE_HIGH /* SPK_AMP_SCL */ >;
+ i2c-gpio,delay-us = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ max98504: max98504 at 31 {
+ compatible = "maxim,max98504";
+ reg = <0x31>;
+ maxim,rx-path = <1>;
+ maxim,tx-path = <1>;
+ maxim,tx-channel-mask = <3>;
+ maxim,tx-channel-source = <2>;
+ };
+ };
+
+ sound {
+ compatible = "samsung,tm2-audio";
+ audio-codec = <&wm5110>;
+ i2s-controller = <&i2s0>;
+ audio-amplifier = <&max98504>;
+ mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>;
+ model = "wm5110";
+ samsung,audio-routing =
+ /* Headphone */
+ "HP", "HPOUT1L",
+ "HP", "HPOUT1R",
+
+ /* Speaker */
+ "SPK", "SPKOUT",
+ "SPKOUT", "HPOUT2L",
+ "SPKOUT", "HPOUT2R",
+
+ /* Receiver */
+ "RCV", "HPOUT3L",
+ "RCV", "HPOUT3R";
+ status = "okay";
+ };
+};
+
+&adc {
+ vdd-supply = <&ldo3_reg>;
+ status = "okay";
+
+ thermistor-ap {
+ compatible = "murata,ncp03wf104";
+ pullup-uv = <1800000>;
+ pullup-ohm = <100000>;
+ pulldown-ohm = <0>;
+ io-channels = <&adc 0>;
+ };
+
+ thermistor-battery {
+ compatible = "murata,ncp03wf104";
+ pullup-uv = <1800000>;
+ pullup-ohm = <100000>;
+ pulldown-ohm = <0>;
+ io-channels = <&adc 1>;
+ #thermal-sensor-cells = <0>;
+ };
+
+ thermistor-charger {
+ compatible = "murata,ncp03wf104";
+ pullup-uv = <1800000>;
+ pullup-ohm = <100000>;
+ pulldown-ohm = <0>;
+ io-channels = <&adc 2>;
+ };
+};
+
+&bus_g2d_400 {
+ devfreq-events = <&ppmu_event0_d0_general>, <&ppmu_event0_d1_general>;
+ vdd-supply = <&buck4_reg>;
+ exynos,saturation-ratio = <10>;
+ status = "okay";
+};
+
+&bus_g2d_266 {
+ devfreq = <&bus_g2d_400>;
+ status = "okay";
+};
+
+&bus_gscl {
+ devfreq = <&bus_g2d_400>;
+ status = "okay";
+};
+
+&bus_hevc {
+ devfreq = <&bus_g2d_400>;
+ status = "okay";
+};
+
+&bus_jpeg {
+ devfreq = <&bus_g2d_400>;
+ status = "okay";
+};
+
+&bus_mfc {
+ devfreq = <&bus_g2d_400>;
+ status = "okay";
+};
+
+&bus_mscl {
+ devfreq = <&bus_g2d_400>;
+ status = "okay";
+};
+
+&bus_noc0 {
+ devfreq = <&bus_g2d_400>;
+ status = "okay";
+};
+
+&bus_noc1 {
+ devfreq = <&bus_g2d_400>;
+ status = "okay";
+};
+
+&bus_noc2 {
+ devfreq = <&bus_g2d_400>;
+ status = "okay";
+};
+
+&cmu_aud {
+ assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>;
+ assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>;
+};
+
+&cmu_fsys {
+ assigned-clocks = <&cmu_top CLK_MOUT_SCLK_USBDRD30>,
+ <&cmu_top CLK_MOUT_SCLK_USBHOST30>,
+ <&cmu_fsys CLK_MOUT_SCLK_USBDRD30_USER>,
+ <&cmu_fsys CLK_MOUT_SCLK_USBHOST30_USER>,
+ <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_USER>,
+ <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_USER>,
+ <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_USER>,
+ <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_USER>,
+ <&cmu_top CLK_DIV_SCLK_USBDRD30>,
+ <&cmu_top CLK_DIV_SCLK_USBHOST30>;
+ assigned-clock-parents = <&cmu_top CLK_MOUT_BUS_PLL_USER>,
+ <&cmu_top CLK_MOUT_BUS_PLL_USER>,
+ <&cmu_top CLK_SCLK_USBDRD30_FSYS>,
+ <&cmu_top CLK_SCLK_USBHOST30_FSYS>,
+ <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_PHY>,
+ <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_PHY>,
+ <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_PHY>,
+ <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_PHY>;
+ assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>,
+ <66700000>, <66700000>;
+};
+
+&cmu_gscl {
+ assigned-clocks = <&cmu_gscl CLK_MOUT_ACLK_GSCL_111_USER>,
+ <&cmu_gscl CLK_MOUT_ACLK_GSCL_333_USER>;
+ assigned-clock-parents = <&cmu_top CLK_ACLK_GSCL_111>,
+ <&cmu_top CLK_ACLK_GSCL_333>;
+};
+
+&cmu_mfc {
+ assigned-clocks = <&cmu_mfc CLK_MOUT_ACLK_MFC_400_USER>;
+ assigned-clock-parents = <&cmu_top CLK_ACLK_MFC_400>;
+};
+
+&cmu_mscl {
+ assigned-clocks = <&cmu_mscl CLK_MOUT_ACLK_MSCL_400_USER>,
+ <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>,
+ <&cmu_mscl CLK_MOUT_SCLK_JPEG>,
+ <&cmu_top CLK_MOUT_SCLK_JPEG_A>;
+ assigned-clock-parents = <&cmu_top CLK_ACLK_MSCL_400>,
+ <&cmu_top CLK_SCLK_JPEG_MSCL>,
+ <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>,
+ <&cmu_top CLK_MOUT_BUS_PLL_USER>;
+};
+
+&cpu0 {
+ cpu-supply = <&buck3_reg>;
+};
+
+&cpu4 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&decon {
+ status = "okay";
+
+ i80-if-timings {
+ };
+};
+
+&dsi {
+ status = "okay";
+ vddcore-supply = <&ldo6_reg>;
+ vddio-supply = <&ldo7_reg>;
+ samsung,pll-clock-frequency = <24000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&te_irq>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 1 {
+ reg = <1>;
+
+ dsi_out: endpoint {
+ samsung,burst-clock-frequency = <512000000>;
+ samsung,esc-clock-frequency = <16000000>;
+ };
+ };
+ };
+};
+
+&hsi2c_0 {
+ status = "okay";
+ clock-frequency = <2500000>;
+
+ s2mps13-pmic at 66 {
+ compatible = "samsung,s2mps13-pmic";
+ interrupt-parent = <&gpa0>;
+ interrupts = <7 IRQ_TYPE_NONE>;
+ reg = <0x66>;
+ samsung,s2mps11-wrstbi-ground;
+
+ s2mps13_osc: clocks {
+ compatible = "samsung,s2mps13-clk";
+ #clock-cells = <1>;
+ clock-output-names = "s2mps13_ap", "s2mps13_cp",
+ "s2mps13_bt";
+ };
+
+ regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "VDD_ALIVE_0.9V_AP";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-always-on;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "VDDQ_MMC2_2.8V_AP";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "VDD1_E_1.8V_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "VDD10_MIF_PLL_1.0V_AP";
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "VDD10_DPLL_1.0V_AP";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "VDD10_MIPI2L_1.0V_AP";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "VDD18_MIPI2L_1.8V_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "VDD18_LLI_1.8V_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo9_reg: LDO9 {
+ regulator-name = "VDD18_ABB_ETC_1.8V_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "VDD33_USB30_3.0V_AP";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "VDD_INT_M_1.0V_AP";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "VDD_KFC_M_1.1V_AP";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "VDD_G3D_M_0.95V_AP";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <950000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "VDDQ_M1_LDO_1.2V_AP";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "VDDQ_M2_LDO_1.2V_AP";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "VDDQ_EFUSE";
+ regulator-min-microvolt = <1400000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-always-on;
+ };
+
+ ldo17_reg: LDO17 {
+ regulator-name = "V_TFLASH_2.8V_AP";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo18_reg: LDO18 {
+ regulator-name = "V_CODEC_1.8V_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo19_reg: LDO19 {
+ regulator-name = "VDDA_1.8V_COMP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo20_reg: LDO20 {
+ regulator-name = "VCC_2.8V_AP";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ ldo21_reg: LDO21 {
+ regulator-name = "VT_CAM_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo22_reg: LDO22 {
+ regulator-name = "CAM_IO_1.8V_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo23_reg: LDO23 {
+ regulator-name = "CAM_SEN_CORE_1.2V_AP";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ ldo24_reg: LDO24 {
+ regulator-name = "VT_CAM_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ ldo25_reg: LDO25 {
+ regulator-name = "CAM_SEN_A2.8V_AP";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo26_reg: LDO26 {
+ regulator-name = "CAM_AF_2.8V_AP";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo27_reg: LDO27 {
+ regulator-name = "VCC_3.0V_LCD_AP";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ ldo28_reg: LDO28 {
+ regulator-name = "VCC_1.8V_LCD_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo29_reg: LDO29 {
+ regulator-name = "VT_CAM_2.8V";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ ldo30_reg: LDO30 {
+ regulator-name = "TSP_AVDD_3.3V_AP";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo31_reg: LDO31 {
+ regulator-name = "TSP_VDD_1.85V_AP";
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <1850000>;
+ };
+
+ ldo32_reg: LDO32 {
+ regulator-name = "VTOUCH_1.8V_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo33_reg: LDO33 {
+ regulator-name = "VTOUCH_LED_3.3V";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-ramp-delay = <12500>;
+ };
+
+ ldo34_reg: LDO34 {
+ regulator-name = "VCC_1.8V_MHL_AP";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <2100000>;
+ };
+
+ ldo35_reg: LDO35 {
+ regulator-name = "OIS_VM_2.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo36_reg: LDO36 {
+ regulator-name = "VSIL_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ ldo37_reg: LDO37 {
+ regulator-name = "VF_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo38_reg: LDO38 {
+ regulator-name = "VCC_3.0V_MOTOR_AP";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ ldo39_reg: LDO39 {
+ regulator-name = "V_HRM_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo40_reg: LDO40 {
+ regulator-name = "V_HRM_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "VDD_MIF_0.9V_AP";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "VDD_EGL_1.0V_AP";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "VDD_KFC_1.0V_AP";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "VDD_INT_0.95V_AP";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "VDD_DISP_CAM0_0.9V_AP";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ buck6_reg: BUCK6 {
+ regulator-name = "VDD_G3D_0.9V_AP";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ buck7_reg: BUCK7 {
+ regulator-name = "VDD_MEM1_1.2V_AP";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ buck8_reg: BUCK8 {
+ regulator-name = "VDD_LLDO_1.35V_AP";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ buck9_reg: BUCK9 {
+ regulator-name = "VDD_MLDO_2.0V_AP";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ buck10_reg: BUCK10 {
+ regulator-name = "vdd_mem2";
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&hsi2c_8 {
+ status = "okay";
+
+ max77843 at 66 {
+ compatible = "maxim,max77843";
+ interrupt-parent = <&gpa1>;
+ interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+ reg = <0x66>;
+
+ muic: max77843-muic {
+ compatible = "maxim,max77843-muic";
+ };
+
+ regulators {
+ compatible = "maxim,max77843-regulator";
+ safeout1_reg: SAFEOUT1 {
+ regulator-name = "SAFEOUT1";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <4950000>;
+ };
+
+ safeout2_reg: SAFEOUT2 {
+ regulator-name = "SAFEOUT2";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <4950000>;
+ };
+
+ charger_reg: CHARGER {
+ regulator-name = "CHARGER";
+ regulator-min-microamp = <100000>;
+ regulator-max-microamp = <3150000>;
+ };
+ };
+
+ haptic: max77843-haptic {
+ compatible = "maxim,max77843-haptic";
+ haptic-supply = <&ldo38_reg>;
+ pwms = <&pwm 0 33670 0>;
+ pwm-names = "haptic";
+ };
+ };
+};
+
+&i2s0 {
+ status = "okay";
+};
+
+&mshc_0 {
+ status = "okay";
+ num-slots = <1>;
+ mmc-hs200-1_8v;
+ mmc-hs400-1_8v;
+ cap-mmc-highspeed;
+ non-removable;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <0 4>;
+ samsung,dw-mshc-ddr-timing = <0 2>;
+ samsung,dw-mshc-hs400-timing = <0 3>;
+ samsung,read-strobe-delay = <90>;
+ fifo-depth = <0x80>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4
+ &sd0_bus8 &sd0_rdqs>;
+ bus-width = <8>;
+ assigned-clocks = <&cmu_top CLK_SCLK_MMC0_FSYS>;
+ assigned-clock-rates = <800000000>;
+};
+
+&mshc_2 {
+ status = "okay";
+ num-slots = <1>;
+ cap-sd-highspeed;
+ disable-wp;
+ cd-gpios = <&gpa2 4 GPIO_ACTIVE_HIGH>;
+ cd-inverted;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <0 4>;
+ samsung,dw-mshc-ddr-timing = <0 2>;
+ fifo-depth = <0x80>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>;
+ bus-width = <4>;
+};
+
+&ppmu_d0_general {
+ status = "okay";
+ events {
+ ppmu_event0_d0_general: ppmu-event0-d0-general {
+ event-name = "ppmu-event0-d0-general";
+ };
+ };
+};
+
+&ppmu_d1_general {
+ status = "okay";
+ events {
+ ppmu_event0_d1_general: ppmu-event0-d1-general {
+ event-name = "ppmu-event0-d1-general";
+ };
+ };
+};
+
+&pinctrl_alive {
+ pinctrl-names = "default";
+ pinctrl-0 = <&initial_alive>;
+
+ initial_alive: initial-state {
+ PIN(IN, gpa0-0, DOWN, LV1);
+ PIN(IN, gpa0-1, NONE, LV1);
+ PIN(IN, gpa0-2, DOWN, LV1);
+ PIN(IN, gpa0-3, NONE, LV1);
+ PIN(IN, gpa0-4, NONE, LV1);
+ PIN(IN, gpa0-5, DOWN, LV1);
+ PIN(IN, gpa0-6, NONE, LV1);
+ PIN(IN, gpa0-7, NONE, LV1);
+
+ PIN(IN, gpa1-0, UP, LV1);
+ PIN(IN, gpa1-1, NONE, LV1);
+ PIN(IN, gpa1-2, NONE, LV1);
+ PIN(IN, gpa1-3, DOWN, LV1);
+ PIN(IN, gpa1-4, DOWN, LV1);
+ PIN(IN, gpa1-5, NONE, LV1);
+ PIN(IN, gpa1-6, NONE, LV1);
+ PIN(IN, gpa1-7, NONE, LV1);
+
+ PIN(IN, gpa2-0, NONE, LV1);
+ PIN(IN, gpa2-1, NONE, LV1);
+ PIN(IN, gpa2-2, NONE, LV1);
+ PIN(IN, gpa2-3, DOWN, LV1);
+ PIN(IN, gpa2-4, NONE, LV1);
+ PIN(IN, gpa2-5, DOWN, LV1);
+ PIN(IN, gpa2-6, DOWN, LV1);
+ PIN(IN, gpa2-7, NONE, LV1);
+
+ PIN(IN, gpa3-0, DOWN, LV1);
+ PIN(IN, gpa3-1, DOWN, LV1);
+ PIN(IN, gpa3-2, NONE, LV1);
+ PIN(IN, gpa3-3, DOWN, LV1);
+ PIN(IN, gpa3-4, NONE, LV1);
+ PIN(IN, gpa3-5, DOWN, LV1);
+ PIN(IN, gpa3-6, DOWN, LV1);
+ PIN(IN, gpa3-7, DOWN, LV1);
+
+ PIN(IN, gpf1-0, NONE, LV1);
+ PIN(IN, gpf1-1, NONE, LV1);
+ PIN(IN, gpf1-2, DOWN, LV1);
+ PIN(IN, gpf1-4, UP, LV1);
+ PIN(OUT, gpf1-5, NONE, LV1);
+ PIN(IN, gpf1-6, DOWN, LV1);
+ PIN(IN, gpf1-7, DOWN, LV1);
+
+ PIN(IN, gpf2-0, DOWN, LV1);
+ PIN(IN, gpf2-1, DOWN, LV1);
+ PIN(IN, gpf2-2, DOWN, LV1);
+ PIN(IN, gpf2-3, DOWN, LV1);
+
+ PIN(IN, gpf3-0, DOWN, LV1);
+ PIN(IN, gpf3-1, DOWN, LV1);
+ PIN(IN, gpf3-2, NONE, LV1);
+ PIN(IN, gpf3-3, DOWN, LV1);
+
+ PIN(IN, gpf4-0, DOWN, LV1);
+ PIN(IN, gpf4-1, DOWN, LV1);
+ PIN(IN, gpf4-2, DOWN, LV1);
+ PIN(IN, gpf4-3, DOWN, LV1);
+ PIN(IN, gpf4-4, DOWN, LV1);
+ PIN(IN, gpf4-5, DOWN, LV1);
+ PIN(IN, gpf4-6, DOWN, LV1);
+ PIN(IN, gpf4-7, DOWN, LV1);
+
+ PIN(IN, gpf5-0, DOWN, LV1);
+ PIN(IN, gpf5-1, DOWN, LV1);
+ PIN(IN, gpf5-2, DOWN, LV1);
+ PIN(IN, gpf5-3, DOWN, LV1);
+ PIN(OUT, gpf5-4, NONE, LV1);
+ PIN(IN, gpf5-5, DOWN, LV1);
+ PIN(IN, gpf5-6, DOWN, LV1);
+ PIN(IN, gpf5-7, DOWN, LV1);
+ };
+
+ te_irq: te_irq {
+ samsung,pins = "gpf1-3";
+ samsung,pin-function = <0xf>;
+ };
+};
+
+&pinctrl_cpif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&initial_cpif>;
+
+ initial_cpif: initial-state {
+ PIN(IN, gpv6-0, DOWN, LV1);
+ PIN(IN, gpv6-1, DOWN, LV1);
+ };
+};
+
+&pinctrl_ese {
+ pinctrl-names = "default";
+ pinctrl-0 = <&initial_ese>;
+
+ initial_ese: initial-state {
+ PIN(IN, gpj2-0, DOWN, LV1);
+ PIN(IN, gpj2-1, DOWN, LV1);
+ PIN(IN, gpj2-2, DOWN, LV1);
+ };
+};
+
+&pinctrl_fsys {
+ pinctrl-names = "default";
+ pinctrl-0 = <&initial_fsys>;
+
+ initial_fsys: initial-state {
+ PIN(IN, gpr3-0, NONE, LV1);
+ PIN(IN, gpr3-1, DOWN, LV1);
+ PIN(IN, gpr3-2, DOWN, LV1);
+ PIN(IN, gpr3-3, DOWN, LV1);
+ PIN(IN, gpr3-7, NONE, LV1);
+ };
+};
+
+&pinctrl_imem {
+ pinctrl-names = "default";
+ pinctrl-0 = <&initial_imem>;
+
+ initial_imem: initial-state {
+ PIN(IN, gpf0-0, UP, LV1);
+ PIN(IN, gpf0-1, UP, LV1);
+ PIN(IN, gpf0-2, DOWN, LV1);
+ PIN(IN, gpf0-3, UP, LV1);
+ PIN(IN, gpf0-4, DOWN, LV1);
+ PIN(IN, gpf0-5, NONE, LV1);
+ PIN(IN, gpf0-6, DOWN, LV1);
+ PIN(IN, gpf0-7, UP, LV1);
+ };
+};
+
+&pinctrl_nfc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&initial_nfc>;
+
+ initial_nfc: initial-state {
+ PIN(IN, gpj0-2, DOWN, LV1);
+ };
+};
+
+&pinctrl_peric {
+ pinctrl-names = "default";
+ pinctrl-0 = <&initial_peric>;
+
+ initial_peric: initial-state {
+ PIN(IN, gpv7-0, DOWN, LV1);
+ PIN(IN, gpv7-1, DOWN, LV1);
+ PIN(IN, gpv7-2, NONE, LV1);
+ PIN(IN, gpv7-3, DOWN, LV1);
+ PIN(IN, gpv7-4, DOWN, LV1);
+ PIN(IN, gpv7-5, DOWN, LV1);
+
+ PIN(IN, gpb0-4, DOWN, LV1);
+
+ PIN(IN, gpc0-2, DOWN, LV1);
+ PIN(IN, gpc0-5, DOWN, LV1);
+ PIN(IN, gpc0-7, DOWN, LV1);
+
+ PIN(IN, gpc1-1, DOWN, LV1);
+
+ PIN(IN, gpc3-4, NONE, LV1);
+ PIN(IN, gpc3-5, NONE, LV1);
+ PIN(IN, gpc3-6, NONE, LV1);
+ PIN(IN, gpc3-7, NONE, LV1);
+
+ PIN(OUT, gpg0-0, NONE, LV1);
+ PIN(FUNC1, gpg0-1, DOWN, LV1);
+
+ PIN(IN, gpd2-5, DOWN, LV1);
+
+ PIN(IN, gpd4-0, NONE, LV1);
+ PIN(IN, gpd4-1, DOWN, LV1);
+ PIN(IN, gpd4-2, DOWN, LV1);
+ PIN(IN, gpd4-3, DOWN, LV1);
+ PIN(IN, gpd4-4, DOWN, LV1);
+
+ PIN(IN, gpd6-3, DOWN, LV1);
+
+ PIN(IN, gpd8-1, UP, LV1);
+
+ PIN(IN, gpg1-0, DOWN, LV1);
+ PIN(IN, gpg1-1, DOWN, LV1);
+ PIN(IN, gpg1-2, DOWN, LV1);
+ PIN(IN, gpg1-3, DOWN, LV1);
+ PIN(IN, gpg1-4, DOWN, LV1);
+
+ PIN(IN, gpg2-0, DOWN, LV1);
+ PIN(IN, gpg2-1, DOWN, LV1);
+
+ PIN(IN, gpg3-0, DOWN, LV1);
+ PIN(IN, gpg3-1, DOWN, LV1);
+ PIN(IN, gpg3-5, DOWN, LV1);
+ PIN(IN, gpg3-7, DOWN, LV1);
+ };
+};
+
+&pinctrl_touch {
+ pinctrl-names = "default";
+ pinctrl-0 = <&initial_touch>;
+
+ initial_touch: initial-state {
+ PIN(IN, gpj1-2, DOWN, LV1);
+ };
+};
+
+&pwm {
+ pinctrl-0 = <&pwm0_out>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&mic {
+ status = "okay";
+
+ i80-if-timings {
+ };
+};
+
+&pmu_system_controller {
+ assigned-clocks = <&pmu_system_controller 0>;
+ assigned-clock-parents = <&xxti>;
+};
+
+&serial_1 {
+ status = "okay";
+};
+
+&spi_1 {
+ cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+
+ wm5110: wm5110-codec at 0 {
+ compatible = "wlf,wm5110";
+ reg = <0x0>;
+ spi-max-frequency = <20000000>;
+ interrupt-parent = <&gpa0>;
+ interrupts = <4 IRQ_TYPE_NONE>;
+ clocks = <&pmu_system_controller 0>,
+ <&s2mps13_osc S2MPS11_CLK_BT>;
+ clock-names = "mclk1", "mclk2";
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ wlf,micd-detect-debounce = <300>;
+ wlf,micd-bias-start-time = <0x1>;
+ wlf,micd-rate = <0x7>;
+ wlf,micd-dbtime = <0x1>;
+ wlf,micd-force-micbias;
+ wlf,micd-configs = <0x0 1 0>;
+ wlf,hpdet-channel = <1>;
+ wlf,gpsw = <0x1>;
+ wlf,inmode = <2 0 2 0>;
+
+ wlf,reset = <&gpc0 7 GPIO_ACTIVE_HIGH>;
+ wlf,ldoena = <&gpf0 0 GPIO_ACTIVE_HIGH>;
+
+ /* core supplies */
+ AVDD-supply = <&ldo18_reg>;
+ DBVDD1-supply = <&ldo18_reg>;
+ CPVDD-supply = <&ldo18_reg>;
+ DBVDD2-supply = <&ldo18_reg>;
+ DBVDD3-supply = <&ldo18_reg>;
+
+ controller-data {
+ samsung,spi-feedback-delay = <0>;
+ };
+ };
+};
+
+&timer {
+ clock-frequency = <24000000>;
+};
+
+&tmu_atlas0 {
+ vtmu-supply = <&ldo3_reg>;
+ status = "okay";
+};
+
+&tmu_apollo {
+ vtmu-supply = <&ldo3_reg>;
+ status = "okay";
+};
+
+&tmu_g3d {
+ vtmu-supply = <&ldo3_reg>;
+ status = "okay";
+};
+
+&usbdrd30 {
+ vdd33-supply = <&ldo10_reg>;
+ vdd10-supply = <&ldo6_reg>;
+ status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+ dr_mode = "otg";
+};
+
+&usbdrd30_phy {
+ vbus-supply = <&safeout1_reg>;
+ status = "okay";
+};
+
+&xxti {
+ clock-frequency = <24000000>;
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
dissimilarity index 98%
index 4e6619c..aa8584a 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
@@ -1,1119 +1,19 @@
-/*
- * SAMSUNG Exynos5433 TM2 board device tree source
- *
- * Copyright (c) 2016 Samsung Electronics Co., Ltd.
- *
- * Device tree source file for Samsung's TM2 board which is based on
- * Samsung Exynos5433 SoC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/dts-v1/;
-#include "exynos5433.dtsi"
-#include <dt-bindings/clock/samsung,s2mps11.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
- model = "Samsung TM2 board";
- compatible = "samsung,tm2", "samsung,exynos5433";
-
- aliases {
- gsc0 = &gsc_0;
- gsc1 = &gsc_1;
- gsc2 = &gsc_2;
- pinctrl0 = &pinctrl_alive;
- pinctrl1 = &pinctrl_aud;
- pinctrl2 = &pinctrl_cpif;
- pinctrl3 = &pinctrl_ese;
- pinctrl4 = &pinctrl_finger;
- pinctrl5 = &pinctrl_fsys;
- pinctrl6 = &pinctrl_imem;
- pinctrl7 = &pinctrl_nfc;
- pinctrl8 = &pinctrl_peric;
- pinctrl9 = &pinctrl_touch;
- serial0 = &serial_0;
- serial1 = &serial_1;
- serial2 = &serial_2;
- serial3 = &serial_3;
- spi0 = &spi_0;
- spi1 = &spi_1;
- spi2 = &spi_2;
- spi3 = &spi_3;
- spi4 = &spi_4;
- mshc0 = &mshc_0;
- mshc2 = &mshc_2;
- };
-
- chosen {
- stdout-path = &serial_1;
- };
-
- memory at 20000000 {
- device_type = "memory";
- reg = <0x0 0x20000000 0x0 0xc0000000>;
- };
-
- gpio-keys {
- compatible = "gpio-keys";
-
- power-key {
- gpios = <&gpa2 7 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_POWER>;
- label = "power key";
- debounce-interval = <10>;
- };
-
- volume-up-key {
- gpios = <&gpa2 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_VOLUMEUP>;
- label = "volume-up key";
- debounce-interval = <10>;
- };
-
- volume-down-key {
- gpios = <&gpa2 1 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_VOLUMEDOWN>;
- label = "volume-down key";
- debounce-interval = <10>;
- };
-
- homepage-key {
- gpios = <&gpa0 3 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_MENU>;
- label = "homepage key";
- debounce-interval = <10>;
- };
- };
-
- i2c_max98504: i2c-gpio-0 {
- compatible = "i2c-gpio";
- gpios = <&gpd0 1 GPIO_ACTIVE_HIGH /* SPK_AMP_SDA */
- &gpd0 0 GPIO_ACTIVE_HIGH /* SPK_AMP_SCL */ >;
- i2c-gpio,delay-us = <2>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "okay";
-
- max98504: max98504 at 31 {
- compatible = "maxim,max98504";
- reg = <0x31>;
- maxim,rx-path = <1>;
- maxim,tx-path = <1>;
- maxim,tx-channel-mask = <3>;
- maxim,tx-channel-source = <2>;
- };
- };
-
- sound {
- compatible = "samsung,tm2-audio";
- audio-codec = <&wm5110>;
- i2s-controller = <&i2s0>;
- audio-amplifier = <&max98504>;
- mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>;
- model = "wm5110";
- samsung,audio-routing =
- /* Headphone */
- "HP", "HPOUT1L",
- "HP", "HPOUT1R",
-
- /* Speaker */
- "SPK", "SPKOUT",
- "SPKOUT", "HPOUT2L",
- "SPKOUT", "HPOUT2R",
-
- /* Receiver */
- "RCV", "HPOUT3L",
- "RCV", "HPOUT3R";
- status = "okay";
- };
-};
-
-&adc {
- vdd-supply = <&ldo3_reg>;
- status = "okay";
-
- thermistor-ap {
- compatible = "murata,ncp03wf104";
- pullup-uv = <1800000>;
- pullup-ohm = <100000>;
- pulldown-ohm = <0>;
- io-channels = <&adc 0>;
- };
-
- thermistor-battery {
- compatible = "murata,ncp03wf104";
- pullup-uv = <1800000>;
- pullup-ohm = <100000>;
- pulldown-ohm = <0>;
- io-channels = <&adc 1>;
- #thermal-sensor-cells = <0>;
- };
-
- thermistor-charger {
- compatible = "murata,ncp03wf104";
- pullup-uv = <1800000>;
- pullup-ohm = <100000>;
- pulldown-ohm = <0>;
- io-channels = <&adc 2>;
- };
-};
-
-&bus_g2d_400 {
- devfreq-events = <&ppmu_event0_d0_general>, <&ppmu_event0_d1_general>;
- vdd-supply = <&buck4_reg>;
- exynos,saturation-ratio = <10>;
- status = "okay";
-};
-
-&bus_g2d_266 {
- devfreq = <&bus_g2d_400>;
- status = "okay";
-};
-
-&bus_gscl {
- devfreq = <&bus_g2d_400>;
- status = "okay";
-};
-
-&bus_hevc {
- devfreq = <&bus_g2d_400>;
- status = "okay";
-};
-
-&bus_jpeg {
- devfreq = <&bus_g2d_400>;
- status = "okay";
-};
-
-&bus_mfc {
- devfreq = <&bus_g2d_400>;
- status = "okay";
-};
-
-&bus_mscl {
- devfreq = <&bus_g2d_400>;
- status = "okay";
-};
-
-&bus_noc0 {
- devfreq = <&bus_g2d_400>;
- status = "okay";
-};
-
-&bus_noc1 {
- devfreq = <&bus_g2d_400>;
- status = "okay";
-};
-
-&bus_noc2 {
- devfreq = <&bus_g2d_400>;
- status = "okay";
-};
-
-&cmu_aud {
- assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>;
- assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>;
-};
-
-&cmu_fsys {
- assigned-clocks = <&cmu_top CLK_MOUT_SCLK_USBDRD30>,
- <&cmu_top CLK_MOUT_SCLK_USBHOST30>,
- <&cmu_fsys CLK_MOUT_SCLK_USBDRD30_USER>,
- <&cmu_fsys CLK_MOUT_SCLK_USBHOST30_USER>,
- <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_USER>,
- <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_USER>,
- <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_USER>,
- <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_USER>,
- <&cmu_top CLK_DIV_SCLK_USBDRD30>,
- <&cmu_top CLK_DIV_SCLK_USBHOST30>;
- assigned-clock-parents = <&cmu_top CLK_MOUT_BUS_PLL_USER>,
- <&cmu_top CLK_MOUT_BUS_PLL_USER>,
- <&cmu_top CLK_SCLK_USBDRD30_FSYS>,
- <&cmu_top CLK_SCLK_USBHOST30_FSYS>,
- <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_PHY>,
- <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_PHY>,
- <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_PHY>,
- <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_PHY>;
- assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>,
- <66700000>, <66700000>;
-};
-
-&cmu_gscl {
- assigned-clocks = <&cmu_gscl CLK_MOUT_ACLK_GSCL_111_USER>,
- <&cmu_gscl CLK_MOUT_ACLK_GSCL_333_USER>;
- assigned-clock-parents = <&cmu_top CLK_ACLK_GSCL_111>,
- <&cmu_top CLK_ACLK_GSCL_333>;
-};
-
-&cmu_mfc {
- assigned-clocks = <&cmu_mfc CLK_MOUT_ACLK_MFC_400_USER>;
- assigned-clock-parents = <&cmu_top CLK_ACLK_MFC_400>;
-};
-
-&cmu_mscl {
- assigned-clocks = <&cmu_mscl CLK_MOUT_ACLK_MSCL_400_USER>,
- <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>,
- <&cmu_mscl CLK_MOUT_SCLK_JPEG>,
- <&cmu_top CLK_MOUT_SCLK_JPEG_A>;
- assigned-clock-parents = <&cmu_top CLK_ACLK_MSCL_400>,
- <&cmu_top CLK_SCLK_JPEG_MSCL>,
- <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>,
- <&cmu_top CLK_MOUT_BUS_PLL_USER>;
-};
-
-&cpu0 {
- cpu-supply = <&buck3_reg>;
-};
-
-&cpu4 {
- cpu-supply = <&buck2_reg>;
-};
-
-&decon {
- status = "okay";
-
- i80-if-timings {
- };
-};
-
-&dsi {
- status = "okay";
- vddcore-supply = <&ldo6_reg>;
- vddio-supply = <&ldo7_reg>;
- samsung,pll-clock-frequency = <24000000>;
- pinctrl-names = "default";
- pinctrl-0 = <&te_irq>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port at 1 {
- reg = <1>;
-
- dsi_out: endpoint {
- samsung,burst-clock-frequency = <512000000>;
- samsung,esc-clock-frequency = <16000000>;
- };
- };
- };
-};
-
-&hsi2c_0 {
- status = "okay";
- clock-frequency = <2500000>;
-
- s2mps13-pmic at 66 {
- compatible = "samsung,s2mps13-pmic";
- interrupt-parent = <&gpa0>;
- interrupts = <7 IRQ_TYPE_NONE>;
- reg = <0x66>;
- samsung,s2mps11-wrstbi-ground;
-
- s2mps13_osc: clocks {
- compatible = "samsung,s2mps13-clk";
- #clock-cells = <1>;
- clock-output-names = "s2mps13_ap", "s2mps13_cp",
- "s2mps13_bt";
- };
-
- regulators {
- ldo1_reg: LDO1 {
- regulator-name = "VDD_ALIVE_0.9V_AP";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <900000>;
- regulator-always-on;
- };
-
- ldo2_reg: LDO2 {
- regulator-name = "VDDQ_MMC2_2.8V_AP";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- ldo3_reg: LDO3 {
- regulator-name = "VDD1_E_1.8V_AP";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo4_reg: LDO4 {
- regulator-name = "VDD10_MIF_PLL_1.0V_AP";
- regulator-min-microvolt = <1300000>;
- regulator-max-microvolt = <1300000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- ldo5_reg: LDO5 {
- regulator-name = "VDD10_DPLL_1.0V_AP";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- ldo6_reg: LDO6 {
- regulator-name = "VDD10_MIPI2L_1.0V_AP";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- ldo7_reg: LDO7 {
- regulator-name = "VDD18_MIPI2L_1.8V_AP";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo8_reg: LDO8 {
- regulator-name = "VDD18_LLI_1.8V_AP";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- ldo9_reg: LDO9 {
- regulator-name = "VDD18_ABB_ETC_1.8V_AP";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- ldo10_reg: LDO10 {
- regulator-name = "VDD33_USB30_3.0V_AP";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- ldo11_reg: LDO11 {
- regulator-name = "VDD_INT_M_1.0V_AP";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- ldo12_reg: LDO12 {
- regulator-name = "VDD_KFC_M_1.1V_AP";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- };
-
- ldo13_reg: LDO13 {
- regulator-name = "VDD_G3D_M_0.95V_AP";
- regulator-min-microvolt = <950000>;
- regulator-max-microvolt = <950000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- ldo14_reg: LDO14 {
- regulator-name = "VDDQ_M1_LDO_1.2V_AP";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- ldo15_reg: LDO15 {
- regulator-name = "VDDQ_M2_LDO_1.2V_AP";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- ldo16_reg: LDO16 {
- regulator-name = "VDDQ_EFUSE";
- regulator-min-microvolt = <1400000>;
- regulator-max-microvolt = <3400000>;
- regulator-always-on;
- };
-
- ldo17_reg: LDO17 {
- regulator-name = "V_TFLASH_2.8V_AP";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
-
- ldo18_reg: LDO18 {
- regulator-name = "V_CODEC_1.8V_AP";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo19_reg: LDO19 {
- regulator-name = "VDDA_1.8V_COMP";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo20_reg: LDO20 {
- regulator-name = "VCC_2.8V_AP";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- };
-
- ldo21_reg: LDO21 {
- regulator-name = "VT_CAM_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo22_reg: LDO22 {
- regulator-name = "CAM_IO_1.8V_AP";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo23_reg: LDO23 {
- regulator-name = "CAM_SEN_CORE_1.2V_AP";
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1200000>;
- };
-
- ldo24_reg: LDO24 {
- regulator-name = "VT_CAM_1.2V";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- ldo25_reg: LDO25 {
- regulator-name = "CAM_SEN_A2.8V_AP";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
-
- ldo26_reg: LDO26 {
- regulator-name = "CAM_AF_2.8V_AP";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
-
- ldo27_reg: LDO27 {
- regulator-name = "VCC_3.0V_LCD_AP";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- };
-
- ldo28_reg: LDO28 {
- regulator-name = "VCC_1.8V_LCD_AP";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo29_reg: LDO29 {
- regulator-name = "VT_CAM_2.8V";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- };
-
- ldo30_reg: LDO30 {
- regulator-name = "TSP_AVDD_3.3V_AP";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- ldo31_reg: LDO31 {
- regulator-name = "TSP_VDD_1.85V_AP";
- regulator-min-microvolt = <1850000>;
- regulator-max-microvolt = <1850000>;
- };
-
- ldo32_reg: LDO32 {
- regulator-name = "VTOUCH_1.8V_AP";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo33_reg: LDO33 {
- regulator-name = "VTOUCH_LED_3.3V";
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <3300000>;
- regulator-ramp-delay = <12500>;
- };
-
- ldo34_reg: LDO34 {
- regulator-name = "VCC_1.8V_MHL_AP";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <2100000>;
- };
-
- ldo35_reg: LDO35 {
- regulator-name = "OIS_VM_2.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2800000>;
- };
-
- ldo36_reg: LDO36 {
- regulator-name = "VSIL_1.0V";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- };
-
- ldo37_reg: LDO37 {
- regulator-name = "VF_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo38_reg: LDO38 {
- regulator-name = "VCC_3.0V_MOTOR_AP";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- };
-
- ldo39_reg: LDO39 {
- regulator-name = "V_HRM_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo40_reg: LDO40 {
- regulator-name = "V_HRM_3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- buck1_reg: BUCK1 {
- regulator-name = "VDD_MIF_0.9V_AP";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- buck2_reg: BUCK2 {
- regulator-name = "VDD_EGL_1.0V_AP";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1300000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- buck3_reg: BUCK3 {
- regulator-name = "VDD_KFC_1.0V_AP";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- buck4_reg: BUCK4 {
- regulator-name = "VDD_INT_0.95V_AP";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- buck5_reg: BUCK5 {
- regulator-name = "VDD_DISP_CAM0_0.9V_AP";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- buck6_reg: BUCK6 {
- regulator-name = "VDD_G3D_0.9V_AP";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- buck7_reg: BUCK7 {
- regulator-name = "VDD_MEM1_1.2V_AP";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- };
-
- buck8_reg: BUCK8 {
- regulator-name = "VDD_LLDO_1.35V_AP";
- regulator-min-microvolt = <1350000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- buck9_reg: BUCK9 {
- regulator-name = "VDD_MLDO_2.0V_AP";
- regulator-min-microvolt = <1350000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- buck10_reg: BUCK10 {
- regulator-name = "vdd_mem2";
- regulator-min-microvolt = <550000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- };
- };
- };
-};
-
-&hsi2c_8 {
- status = "okay";
-
- max77843 at 66 {
- compatible = "maxim,max77843";
- interrupt-parent = <&gpa1>;
- interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
- reg = <0x66>;
-
- muic: max77843-muic {
- compatible = "maxim,max77843-muic";
- };
-
- regulators {
- compatible = "maxim,max77843-regulator";
- safeout1_reg: SAFEOUT1 {
- regulator-name = "SAFEOUT1";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <4950000>;
- };
-
- safeout2_reg: SAFEOUT2 {
- regulator-name = "SAFEOUT2";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <4950000>;
- };
-
- charger_reg: CHARGER {
- regulator-name = "CHARGER";
- regulator-min-microamp = <100000>;
- regulator-max-microamp = <3150000>;
- };
- };
-
- haptic: max77843-haptic {
- compatible = "maxim,max77843-haptic";
- haptic-supply = <&ldo38_reg>;
- pwms = <&pwm 0 33670 0>;
- pwm-names = "haptic";
- };
- };
-};
-
-&i2s0 {
- status = "okay";
-};
-
-&mshc_0 {
- status = "okay";
- num-slots = <1>;
- mmc-hs200-1_8v;
- mmc-hs400-1_8v;
- cap-mmc-highspeed;
- non-removable;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <0 4>;
- samsung,dw-mshc-ddr-timing = <0 2>;
- samsung,dw-mshc-hs400-timing = <0 3>;
- samsung,read-strobe-delay = <90>;
- fifo-depth = <0x80>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4
- &sd0_bus8 &sd0_rdqs>;
- bus-width = <8>;
- assigned-clocks = <&cmu_top CLK_SCLK_MMC0_FSYS>;
- assigned-clock-rates = <800000000>;
-};
-
-&mshc_2 {
- status = "okay";
- num-slots = <1>;
- cap-sd-highspeed;
- disable-wp;
- cd-gpios = <&gpa2 4 GPIO_ACTIVE_HIGH>;
- cd-inverted;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <0 4>;
- samsung,dw-mshc-ddr-timing = <0 2>;
- fifo-depth = <0x80>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>;
- bus-width = <4>;
-};
-
-&ppmu_d0_general {
- status = "okay";
- events {
- ppmu_event0_d0_general: ppmu-event0-d0-general {
- event-name = "ppmu-event0-d0-general";
- };
- };
-};
-
-&ppmu_d1_general {
- status = "okay";
- events {
- ppmu_event0_d1_general: ppmu-event0-d1-general {
- event-name = "ppmu-event0-d1-general";
- };
- };
-};
-
-&pinctrl_alive {
- pinctrl-names = "default";
- pinctrl-0 = <&initial_alive>;
-
- initial_alive: initial-state {
- PIN(IN, gpa0-0, DOWN, LV1);
- PIN(IN, gpa0-1, NONE, LV1);
- PIN(IN, gpa0-2, DOWN, LV1);
- PIN(IN, gpa0-3, NONE, LV1);
- PIN(IN, gpa0-4, NONE, LV1);
- PIN(IN, gpa0-5, DOWN, LV1);
- PIN(IN, gpa0-6, NONE, LV1);
- PIN(IN, gpa0-7, NONE, LV1);
-
- PIN(IN, gpa1-0, UP, LV1);
- PIN(IN, gpa1-1, NONE, LV1);
- PIN(IN, gpa1-2, NONE, LV1);
- PIN(IN, gpa1-3, DOWN, LV1);
- PIN(IN, gpa1-4, DOWN, LV1);
- PIN(IN, gpa1-5, NONE, LV1);
- PIN(IN, gpa1-6, NONE, LV1);
- PIN(IN, gpa1-7, NONE, LV1);
-
- PIN(IN, gpa2-0, NONE, LV1);
- PIN(IN, gpa2-1, NONE, LV1);
- PIN(IN, gpa2-2, NONE, LV1);
- PIN(IN, gpa2-3, DOWN, LV1);
- PIN(IN, gpa2-4, NONE, LV1);
- PIN(IN, gpa2-5, DOWN, LV1);
- PIN(IN, gpa2-6, DOWN, LV1);
- PIN(IN, gpa2-7, NONE, LV1);
-
- PIN(IN, gpa3-0, DOWN, LV1);
- PIN(IN, gpa3-1, DOWN, LV1);
- PIN(IN, gpa3-2, NONE, LV1);
- PIN(IN, gpa3-3, DOWN, LV1);
- PIN(IN, gpa3-4, NONE, LV1);
- PIN(IN, gpa3-5, DOWN, LV1);
- PIN(IN, gpa3-6, DOWN, LV1);
- PIN(IN, gpa3-7, DOWN, LV1);
-
- PIN(IN, gpf1-0, NONE, LV1);
- PIN(IN, gpf1-1, NONE, LV1);
- PIN(IN, gpf1-2, DOWN, LV1);
- PIN(IN, gpf1-4, UP, LV1);
- PIN(OUT, gpf1-5, NONE, LV1);
- PIN(IN, gpf1-6, DOWN, LV1);
- PIN(IN, gpf1-7, DOWN, LV1);
-
- PIN(IN, gpf2-0, DOWN, LV1);
- PIN(IN, gpf2-1, DOWN, LV1);
- PIN(IN, gpf2-2, DOWN, LV1);
- PIN(IN, gpf2-3, DOWN, LV1);
-
- PIN(IN, gpf3-0, DOWN, LV1);
- PIN(IN, gpf3-1, DOWN, LV1);
- PIN(IN, gpf3-2, NONE, LV1);
- PIN(IN, gpf3-3, DOWN, LV1);
-
- PIN(IN, gpf4-0, DOWN, LV1);
- PIN(IN, gpf4-1, DOWN, LV1);
- PIN(IN, gpf4-2, DOWN, LV1);
- PIN(IN, gpf4-3, DOWN, LV1);
- PIN(IN, gpf4-4, DOWN, LV1);
- PIN(IN, gpf4-5, DOWN, LV1);
- PIN(IN, gpf4-6, DOWN, LV1);
- PIN(IN, gpf4-7, DOWN, LV1);
-
- PIN(IN, gpf5-0, DOWN, LV1);
- PIN(IN, gpf5-1, DOWN, LV1);
- PIN(IN, gpf5-2, DOWN, LV1);
- PIN(IN, gpf5-3, DOWN, LV1);
- PIN(OUT, gpf5-4, NONE, LV1);
- PIN(IN, gpf5-5, DOWN, LV1);
- PIN(IN, gpf5-6, DOWN, LV1);
- PIN(IN, gpf5-7, DOWN, LV1);
- };
-
- te_irq: te_irq {
- samsung,pins = "gpf1-3";
- samsung,pin-function = <0xf>;
- };
-};
-
-&pinctrl_cpif {
- pinctrl-names = "default";
- pinctrl-0 = <&initial_cpif>;
-
- initial_cpif: initial-state {
- PIN(IN, gpv6-0, DOWN, LV1);
- PIN(IN, gpv6-1, DOWN, LV1);
- };
-};
-
-&pinctrl_ese {
- pinctrl-names = "default";
- pinctrl-0 = <&initial_ese>;
-
- initial_ese: initial-state {
- PIN(IN, gpj2-0, DOWN, LV1);
- PIN(IN, gpj2-1, DOWN, LV1);
- PIN(IN, gpj2-2, DOWN, LV1);
- };
-};
-
-&pinctrl_fsys {
- pinctrl-names = "default";
- pinctrl-0 = <&initial_fsys>;
-
- initial_fsys: initial-state {
- PIN(IN, gpr3-0, NONE, LV1);
- PIN(IN, gpr3-1, DOWN, LV1);
- PIN(IN, gpr3-2, DOWN, LV1);
- PIN(IN, gpr3-3, DOWN, LV1);
- PIN(IN, gpr3-7, NONE, LV1);
- };
-};
-
-&pinctrl_imem {
- pinctrl-names = "default";
- pinctrl-0 = <&initial_imem>;
-
- initial_imem: initial-state {
- PIN(IN, gpf0-0, UP, LV1);
- PIN(IN, gpf0-1, UP, LV1);
- PIN(IN, gpf0-2, DOWN, LV1);
- PIN(IN, gpf0-3, UP, LV1);
- PIN(IN, gpf0-4, DOWN, LV1);
- PIN(IN, gpf0-5, NONE, LV1);
- PIN(IN, gpf0-6, DOWN, LV1);
- PIN(IN, gpf0-7, UP, LV1);
- };
-};
-
-&pinctrl_nfc {
- pinctrl-names = "default";
- pinctrl-0 = <&initial_nfc>;
-
- initial_nfc: initial-state {
- PIN(IN, gpj0-2, DOWN, LV1);
- };
-};
-
-&pinctrl_peric {
- pinctrl-names = "default";
- pinctrl-0 = <&initial_peric>;
-
- initial_peric: initial-state {
- PIN(IN, gpv7-0, DOWN, LV1);
- PIN(IN, gpv7-1, DOWN, LV1);
- PIN(IN, gpv7-2, NONE, LV1);
- PIN(IN, gpv7-3, DOWN, LV1);
- PIN(IN, gpv7-4, DOWN, LV1);
- PIN(IN, gpv7-5, DOWN, LV1);
-
- PIN(IN, gpb0-4, DOWN, LV1);
-
- PIN(IN, gpc0-2, DOWN, LV1);
- PIN(IN, gpc0-5, DOWN, LV1);
- PIN(IN, gpc0-7, DOWN, LV1);
-
- PIN(IN, gpc1-1, DOWN, LV1);
-
- PIN(IN, gpc3-4, NONE, LV1);
- PIN(IN, gpc3-5, NONE, LV1);
- PIN(IN, gpc3-6, NONE, LV1);
- PIN(IN, gpc3-7, NONE, LV1);
-
- PIN(OUT, gpg0-0, NONE, LV1);
- PIN(FUNC1, gpg0-1, DOWN, LV1);
-
- PIN(IN, gpd2-5, DOWN, LV1);
-
- PIN(IN, gpd4-0, NONE, LV1);
- PIN(IN, gpd4-1, DOWN, LV1);
- PIN(IN, gpd4-2, DOWN, LV1);
- PIN(IN, gpd4-3, DOWN, LV1);
- PIN(IN, gpd4-4, DOWN, LV1);
-
- PIN(IN, gpd6-3, DOWN, LV1);
-
- PIN(IN, gpd8-1, UP, LV1);
-
- PIN(IN, gpg1-0, DOWN, LV1);
- PIN(IN, gpg1-1, DOWN, LV1);
- PIN(IN, gpg1-2, DOWN, LV1);
- PIN(IN, gpg1-3, DOWN, LV1);
- PIN(IN, gpg1-4, DOWN, LV1);
-
- PIN(IN, gpg2-0, DOWN, LV1);
- PIN(IN, gpg2-1, DOWN, LV1);
-
- PIN(IN, gpg3-0, DOWN, LV1);
- PIN(IN, gpg3-1, DOWN, LV1);
- PIN(IN, gpg3-5, DOWN, LV1);
- PIN(IN, gpg3-7, DOWN, LV1);
- };
-};
-
-&pinctrl_touch {
- pinctrl-names = "default";
- pinctrl-0 = <&initial_touch>;
-
- initial_touch: initial-state {
- PIN(IN, gpj1-2, DOWN, LV1);
- };
-};
-
-&pwm {
- pinctrl-0 = <&pwm0_out>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&mic {
- status = "okay";
-
- i80-if-timings {
- };
-};
-
-&pmu_system_controller {
- assigned-clocks = <&pmu_system_controller 0>;
- assigned-clock-parents = <&xxti>;
-};
-
-&serial_1 {
- status = "okay";
-};
-
-&spi_1 {
- cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>;
- status = "okay";
-
- wm5110: wm5110-codec at 0 {
- compatible = "wlf,wm5110";
- reg = <0x0>;
- spi-max-frequency = <20000000>;
- interrupt-parent = <&gpa0>;
- interrupts = <4 IRQ_TYPE_NONE>;
- clocks = <&pmu_system_controller 0>,
- <&s2mps13_osc S2MPS11_CLK_BT>;
- clock-names = "mclk1", "mclk2";
-
- gpio-controller;
- #gpio-cells = <2>;
-
- wlf,micd-detect-debounce = <300>;
- wlf,micd-bias-start-time = <0x1>;
- wlf,micd-rate = <0x7>;
- wlf,micd-dbtime = <0x1>;
- wlf,micd-force-micbias;
- wlf,micd-configs = <0x0 1 0>;
- wlf,hpdet-channel = <1>;
- wlf,gpsw = <0x1>;
- wlf,inmode = <2 0 2 0>;
-
- wlf,reset = <&gpc0 7 GPIO_ACTIVE_HIGH>;
- wlf,ldoena = <&gpf0 0 GPIO_ACTIVE_HIGH>;
-
- /* core supplies */
- AVDD-supply = <&ldo18_reg>;
- DBVDD1-supply = <&ldo18_reg>;
- CPVDD-supply = <&ldo18_reg>;
- DBVDD2-supply = <&ldo18_reg>;
- DBVDD3-supply = <&ldo18_reg>;
-
- controller-data {
- samsung,spi-feedback-delay = <0>;
- };
- };
-};
-
-&timer {
- clock-frequency = <24000000>;
-};
-
-&tmu_atlas0 {
- vtmu-supply = <&ldo3_reg>;
- status = "okay";
-};
-
-&tmu_apollo {
- vtmu-supply = <&ldo3_reg>;
- status = "okay";
-};
-
-&tmu_g3d {
- vtmu-supply = <&ldo3_reg>;
- status = "okay";
-};
-
-&usbdrd30 {
- vdd33-supply = <&ldo10_reg>;
- vdd10-supply = <&ldo6_reg>;
- status = "okay";
-};
-
-&usbdrd_dwc3_0 {
- dr_mode = "otg";
-};
-
-&usbdrd30_phy {
- vbus-supply = <&safeout1_reg>;
- status = "okay";
-};
-
-&xxti {
- clock-frequency = <24000000>;
-};
+/*
+ * SAMSUNG Exynos5433 TM2 board device tree source
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ *
+ * Device tree source file for Samsung's TM2 board which is based on
+ * Samsung Exynos5433 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "exynos5433-tm2-common.dtsi"
+
+/ {
+ model = "Samsung TM2 board";
+ compatible = "samsung,tm2", "samsung,exynos5433";
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
index 1db4e7f..81fdbef 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
@@ -11,7 +11,7 @@
* published by the Free Software Foundation.
*/
-#include "exynos5433-tm2.dts"
+#include "exynos5433-tm2-common.dtsi"
/ {
model = "Samsung TM2E board";
--
2.7.4
^ permalink raw reply related [flat|nested] 33+ messages in thread* Re: [PATCH v2 3/4] arm64: dts: exynos: make tm2 and tm2e independent from each other
2017-01-05 8:27 ` Jaechul Lee
(?)
@ 2017-01-05 9:13 ` Chanwoo Choi
-1 siblings, 0 replies; 33+ messages in thread
From: Chanwoo Choi @ 2017-01-05 9:13 UTC (permalink / raw)
To: Jaechul Lee, Dmitry Torokhov, Rob Herring, Mark Rutland,
Catalin Marinas, Will Deacon, Kukjin Kim, Krzysztof Kozlowski,
Javier Martinez Canillas
Cc: devicetree, linux-samsung-soc, linux-kernel, Andi Shyti,
beomho.seo, linux-input, galaxyra, linux-arm-kernel
[-- Attachment #1: Type: text/plain, Size: 19424 bytes --]
Hi,
I add the some comment as following:
- ldo23/25/31/38 have the different value between tm2 and tm2e.
- The patch[1] was alread posted. I think you better to rebase this patch on patch[1].
[1] https://patchwork.kernel.org/patch/9491769/
- ("ARM64: dts: TM2: comply to the samsung pinctrl naming convention")
I add detailed comments on below.
On 2017년 01월 05일 17:27, Jaechul Lee wrote:
> From: Andi Shyti <andi.shyti@samsung.com>
>
> Currently tm2e dts includes tm2 but there are some differences
> between the two boards and tm2 has some properties that tm2e
> doesn't have.
>
> That's why it's important to keep the two dts files independent
> and put all the commonalities in a tm2-common.dtsi file.
>
> Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
> Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com>
> ---
> .../boot/dts/exynos/exynos5433-tm2-common.dtsi | 1116 +++++++++++++++++++
> arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 1138 +-------------------
> arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts | 2 +-
> 3 files changed, 1136 insertions(+), 1120 deletions(-)
> create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
> rewrite arch/arm64/boot/dts/exynos/exynos5433-tm2.dts (98%)
>
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
> new file mode 100644
> index 0000000..7ad0019
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
> @@ -0,0 +1,1116 @@
> +/*
> + * SAMSUNG Exynos5433 TM2 board device tree source
> + *
> + * Copyright (c) 2016 Samsung Electronics Co., Ltd.
> + *
> + * Device tree source file for Samsung's TM2 board which is based on
> + * Samsung Exynos5433 SoC.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +/dts-v1/;
> +#include "exynos5433.dtsi"
> +#include <dt-bindings/clock/samsung,s2mps11.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +
[snip]
> +&hsi2c_0 {
> + status = "okay";
> + clock-frequency = <2500000>;
> +
> + s2mps13-pmic@66 {
> + compatible = "samsung,s2mps13-pmic";
> + interrupt-parent = <&gpa0>;
> + interrupts = <7 IRQ_TYPE_NONE>;
> + reg = <0x66>;
> + samsung,s2mps11-wrstbi-ground;
> +
> + s2mps13_osc: clocks {
> + compatible = "samsung,s2mps13-clk";
> + #clock-cells = <1>;
> + clock-output-names = "s2mps13_ap", "s2mps13_cp",
> + "s2mps13_bt";
> + };
> +
> + regulators {
> + ldo1_reg: LDO1 {
> + regulator-name = "VDD_ALIVE_0.9V_AP";
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <900000>;
> + regulator-always-on;
> + };
> +
> + ldo2_reg: LDO2 {
> + regulator-name = "VDDQ_MMC2_2.8V_AP";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo3_reg: LDO3 {
> + regulator-name = "VDD1_E_1.8V_AP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + ldo4_reg: LDO4 {
> + regulator-name = "VDD10_MIF_PLL_1.0V_AP";
> + regulator-min-microvolt = <1300000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo5_reg: LDO5 {
> + regulator-name = "VDD10_DPLL_1.0V_AP";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo6_reg: LDO6 {
> + regulator-name = "VDD10_MIPI2L_1.0V_AP";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo7_reg: LDO7 {
> + regulator-name = "VDD18_MIPI2L_1.8V_AP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo8_reg: LDO8 {
> + regulator-name = "VDD18_LLI_1.8V_AP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo9_reg: LDO9 {
> + regulator-name = "VDD18_ABB_ETC_1.8V_AP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo10_reg: LDO10 {
> + regulator-name = "VDD33_USB30_3.0V_AP";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo11_reg: LDO11 {
> + regulator-name = "VDD_INT_M_1.0V_AP";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo12_reg: LDO12 {
> + regulator-name = "VDD_KFC_M_1.1V_AP";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-always-on;
> + };
> +
> + ldo13_reg: LDO13 {
> + regulator-name = "VDD_G3D_M_0.95V_AP";
> + regulator-min-microvolt = <950000>;
> + regulator-max-microvolt = <950000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo14_reg: LDO14 {
> + regulator-name = "VDDQ_M1_LDO_1.2V_AP";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo15_reg: LDO15 {
> + regulator-name = "VDDQ_M2_LDO_1.2V_AP";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo16_reg: LDO16 {
> + regulator-name = "VDDQ_EFUSE";
> + regulator-min-microvolt = <1400000>;
> + regulator-max-microvolt = <3400000>;
> + regulator-always-on;
> + };
> +
> + ldo17_reg: LDO17 {
> + regulator-name = "V_TFLASH_2.8V_AP";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + };
> +
> + ldo18_reg: LDO18 {
> + regulator-name = "V_CODEC_1.8V_AP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo19_reg: LDO19 {
> + regulator-name = "VDDA_1.8V_COMP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + ldo20_reg: LDO20 {
> + regulator-name = "VCC_2.8V_AP";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-always-on;
> + };
> +
> + ldo21_reg: LDO21 {
> + regulator-name = "VT_CAM_1.8V";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo22_reg: LDO22 {
> + regulator-name = "CAM_IO_1.8V_AP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo23_reg: LDO23 {
> + regulator-name = "CAM_SEN_CORE_1.2V_AP";
> + regulator-min-microvolt = <1050000>;
> + regulator-max-microvolt = <1200000>;
ldo23_reg has the different value between tm2 and tm2e.
- tm2 : name - CAM_SEN_CORE_1.2V_AP, max-microvolt :1200000
- tm2e : name - CAM_SEN_CORE_1.025V_AP, max-microvolt :1050000
> + };
> +
> + ldo24_reg: LDO24 {
> + regulator-name = "VT_CAM_1.2V";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + };
> +
> + ldo25_reg: LDO25 {
> + regulator-name = "CAM_SEN_A2.8V_AP";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + };
ldo25 is only used on TM2 and has the different name between tm2 and tm2e.
- tm2 : name - CAM_SEN_A2.8V_AP
- tm2e : name - UNUSED_LDO15
> +
> + ldo26_reg: LDO26 {
> + regulator-name = "CAM_AF_2.8V_AP";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + };
> +
> + ldo27_reg: LDO27 {
> + regulator-name = "VCC_3.0V_LCD_AP";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + };
> +
> + ldo28_reg: LDO28 {
> + regulator-name = "VCC_1.8V_LCD_AP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo29_reg: LDO29 {
> + regulator-name = "VT_CAM_2.8V";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + };
> +
> + ldo30_reg: LDO30 {
> + regulator-name = "TSP_AVDD_3.3V_AP";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + ldo31_reg: LDO31 {
> + regulator-name = "TSP_VDD_1.85V_AP";
> + regulator-min-microvolt = <1850000>;
> + regulator-max-microvolt = <1850000>;
> + };
ldo31_reg has the different value between tm2 and tm2e.
- tm2 : name - TSP_VDD_1.85V_AP, min/max-microvolt :1850000
- tm2e : name - TSP_VDD_1.8V_AP, min/max-microvolt :1800000
> +
> + ldo32_reg: LDO32 {
> + regulator-name = "VTOUCH_1.8V_AP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo33_reg: LDO33 {
> + regulator-name = "VTOUCH_LED_3.3V";
> + regulator-min-microvolt = <2500000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-ramp-delay = <12500>;
> + };
> +
> + ldo34_reg: LDO34 {
> + regulator-name = "VCC_1.8V_MHL_AP";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <2100000>;
> + };
> +
> + ldo35_reg: LDO35 {
> + regulator-name = "OIS_VM_2.8V";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2800000>;
> + };
> +
> + ldo36_reg: LDO36 {
> + regulator-name = "VSIL_1.0V";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + };
> +
> + ldo37_reg: LDO37 {
> + regulator-name = "VF_1.8V";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo38_reg: LDO38 {
> + regulator-name = "VCC_3.0V_MOTOR_AP";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + };
ldo38_reg has the different value between tm2 and tm2e.
- tm2 : name - VCC_3.0V_MOTOR_AP, min/max-microvolt :3000000
- tm2e : name - VCC_3.3V_MOTOR_AP, min/max-microvolt :3300000
> + regulator-off-in-suspend;
> + };
> + };
> +
> + buck2_reg: BUCK2 {
> + regulator-name = "VDD_EGL_1.0V_AP";
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + buck3_reg: BUCK3 {
> + regulator-name = "VDD_KFC_1.0V_AP";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + buck4_reg: BUCK4 {
> + regulator-name = "VDD_INT_0.95V_AP";
> + regulator-min-microvolt = <600000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + buck5_reg: BUCK5 {
> + regulator-name = "VDD_DISP_CAM0_0.9V_AP";
> + regulator-min-microvolt = <600000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + buck6_reg: BUCK6 {
> + regulator-name = "VDD_G3D_0.9V_AP";
> + regulator-min-microvolt = <600000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + buck7_reg: BUCK7 {
> + regulator-name = "VDD_MEM1_1.2V_AP";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-always-on;
> + };
> +
> + buck8_reg: BUCK8 {
> + regulator-name = "VDD_LLDO_1.35V_AP";
> + regulator-min-microvolt = <1350000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + buck9_reg: BUCK9 {
> + regulator-name = "VDD_MLDO_2.0V_AP";
> + regulator-min-microvolt = <1350000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + buck10_reg: BUCK10 {
> + regulator-name = "vdd_mem2";
> + regulator-min-microvolt = <550000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-always-on;
> + };
> + };
> + };
> +};
> +
> +&hsi2c_8 {
> + status = "okay";
> +
> + max77843@66 {
> + compatible = "maxim,max77843";
> + interrupt-parent = <&gpa1>;
> + interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
> + reg = <0x66>;
> +
> + muic: max77843-muic {
> + compatible = "maxim,max77843-muic";
> + };
> +
> + regulators {
> + compatible = "maxim,max77843-regulator";
> + safeout1_reg: SAFEOUT1 {
> + regulator-name = "SAFEOUT1";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <4950000>;
> + };
> +
> + safeout2_reg: SAFEOUT2 {
> + regulator-name = "SAFEOUT2";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <4950000>;
> + };
> +
> + charger_reg: CHARGER {
> + regulator-name = "CHARGER";
> + regulator-min-microamp = <100000>;
> + regulator-max-microamp = <3150000>;
> + };
> + };
> +
> + haptic: max77843-haptic {
> + compatible = "maxim,max77843-haptic";
> + haptic-supply = <&ldo38_reg>;
> + pwms = <&pwm 0 33670 0>;
> + pwm-names = "haptic";
> + };
> + };
> +};
> +
> +&i2s0 {
> + status = "okay";
> +};
> +
> +&mshc_0 {
> + status = "okay";
> + num-slots = <1>;
> + mmc-hs200-1_8v;
> + mmc-hs400-1_8v;
> + cap-mmc-highspeed;
> + non-removable;
> + card-detect-delay = <200>;
> + samsung,dw-mshc-ciu-div = <3>;
> + samsung,dw-mshc-sdr-timing = <0 4>;
> + samsung,dw-mshc-ddr-timing = <0 2>;
> + samsung,dw-mshc-hs400-timing = <0 3>;
> + samsung,read-strobe-delay = <90>;
> + fifo-depth = <0x80>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4
> + &sd0_bus8 &sd0_rdqs>;
> + bus-width = <8>;
> + assigned-clocks = <&cmu_top CLK_SCLK_MMC0_FSYS>;
> + assigned-clock-rates = <800000000>;
> +};
> +
> +&mshc_2 {
> + status = "okay";
> + num-slots = <1>;
> + cap-sd-highspeed;
> + disable-wp;
> + cd-gpios = <&gpa2 4 GPIO_ACTIVE_HIGH>;
> + cd-inverted;
> + card-detect-delay = <200>;
> + samsung,dw-mshc-ciu-div = <3>;
> + samsung,dw-mshc-sdr-timing = <0 4>;
> + samsung,dw-mshc-ddr-timing = <0 2>;
> + fifo-depth = <0x80>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>;
> + bus-width = <4>;
> +};
> +
> +&ppmu_d0_general {
> + status = "okay";
> + events {
> + ppmu_event0_d0_general: ppmu-event0-d0-general {
> + event-name = "ppmu-event0-d0-general";
> + };
> + };
> +};
> +
> +&ppmu_d1_general {
> + status = "okay";
> + events {
> + ppmu_event0_d1_general: ppmu-event0-d1-general {
> + event-name = "ppmu-event0-d1-general";
> + };
> + };
> +};
> +
> +&pinctrl_alive {
> + pinctrl-names = "default";
> + pinctrl-0 = <&initial_alive>;
> +
The following patches[1] touch the tm2.dts file about pinctrl naming convention.
So, I recommend that this patch shoud be rebased on patch[1] to prevent the merge conflict.
[1] https://patchwork.kernel.org/patch/9491769/
- ("ARM64: dts: TM2: comply to the samsung pinctrl naming convention")
> + initial_alive: initial-state {
> + PIN(IN, gpa0-0, DOWN, LV1);
> + PIN(IN, gpa0-1, NONE, LV1);
> + PIN(IN, gpa0-2, DOWN, LV1);
> + PIN(IN, gpa0-3, NONE, LV1);
> + PIN(IN, gpa0-4, NONE, LV1);
> + PIN(IN, gpa0-5, DOWN, LV1);
> + PIN(IN, gpa0-6, NONE, LV1);
> + PIN(IN, gpa0-7, NONE, LV1);
> +
> + PIN(IN, gpa1-0, UP, LV1);
> + PIN(IN, gpa1-1, NONE, LV1);
> + PIN(IN, gpa1-2, NONE, LV1);
> + PIN(IN, gpa1-3, DOWN, LV1);
> + PIN(IN, gpa1-4, DOWN, LV1);
> + PIN(IN, gpa1-5, NONE, LV1);
> + PIN(IN, gpa1-6, NONE, LV1);
> + PIN(IN, gpa1-7, NONE, LV1);
> +
> + PIN(IN, gpa2-0, NONE, LV1);
> + PIN(IN, gpa2-1, NONE, LV1);
> + PIN(IN, gpa2-2, NONE, LV1);
> + PIN(IN, gpa2-3, DOWN, LV1);
> + PIN(IN, gpa2-4, NONE, LV1);
> + PIN(IN, gpa2-5, DOWN, LV1);
> + PIN(IN, gpa2-6, DOWN, LV1);
> + PIN(IN, gpa2-7, NONE, LV1);
> +
> + PIN(IN, gpa3-0, DOWN, LV1);
> + PIN(IN, gpa3-1, DOWN, LV1);
> + PIN(IN, gpa3-2, NONE, LV1);
> + PIN(IN, gpa3-3, DOWN, LV1);
> + PIN(IN, gpa3-4, NONE, LV1);
> + PIN(IN, gpa3-5, DOWN, LV1);
> + PIN(IN, gpa3-6, DOWN, LV1);
> + PIN(IN, gpa3-7, DOWN, LV1);
> +
> + PIN(IN, gpf1-0, NONE, LV1);
> + PIN(IN, gpf1-1, NONE, LV1);
> + PIN(IN, gpf1-2, DOWN, LV1);
> + PIN(IN, gpf1-4, UP, LV1);
> + PIN(OUT, gpf1-5, NONE, LV1);
> + PIN(IN, gpf1-6, DOWN, LV1);
> + PIN(IN, gpf1-7, DOWN, LV1);
> +
> + PIN(IN, gpf2-0, DOWN, LV1);
> + PIN(IN, gpf2-1, DOWN, LV1);
> + PIN(IN, gpf2-2, DOWN, LV1);
> + PIN(IN, gpf2-3, DOWN, LV1);
> +
> + PIN(IN, gpf3-0, DOWN, LV1);
> + PIN(IN, gpf3-1, DOWN, LV1);
> + PIN(IN, gpf3-2, NONE, LV1);
> + PIN(IN, gpf3-3, DOWN, LV1);
> +
> + PIN(IN, gpf4-0, DOWN, LV1);
> + PIN(IN, gpf4-1, DOWN, LV1);
> + PIN(IN, gpf4-2, DOWN, LV1);
> + PIN(IN, gpf4-3, DOWN, LV1);
> + PIN(IN, gpf4-4, DOWN, LV1);
> + PIN(IN, gpf4-5, DOWN, LV1);
> + PIN(IN, gpf4-6, DOWN, LV1);
> + PIN(IN, gpf4-7, DOWN, LV1);
> +
> + PIN(IN, gpf5-0, DOWN, LV1);
> + PIN(IN, gpf5-1, DOWN, LV1);
> + PIN(IN, gpf5-2, DOWN, LV1);
> + PIN(IN, gpf5-3, DOWN, LV1);
> + PIN(OUT, gpf5-4, NONE, LV1);
> + PIN(IN, gpf5-5, DOWN, LV1);
> + PIN(IN, gpf5-6, DOWN, LV1);
> + PIN(IN, gpf5-7, DOWN, LV1);
> + };
[snip]
> +/*
> + * SAMSUNG Exynos5433 TM2 board device tree source
> + *
> + * Copyright (c) 2016 Samsung Electronics Co., Ltd.
> + *
> + * Device tree source file for Samsung's TM2 board which is based on
> + * Samsung Exynos5433 SoC.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include "exynos5433-tm2-common.dtsi"
> +
> +/ {
> + model = "Samsung TM2 board";
> + compatible = "samsung,tm2", "samsung,exynos5433";
> +};
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
> index 1db4e7f..81fdbef 100644
> --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
> @@ -11,7 +11,7 @@
> * published by the Free Software Foundation.
> */
>
> -#include "exynos5433-tm2.dts"
> +#include "exynos5433-tm2-common.dtsi"
>
> / {
> model = "Samsung TM2E board";
>
--
Best Regards,
Chanwoo Choi
Samsung Electronics
[-- Attachment #2: cw00_choi.vcf --]
[-- Type: text/x-vcard, Size: 6 bytes --]
null
[-- Attachment #3: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 33+ messages in thread* Re: [PATCH v2 3/4] arm64: dts: exynos: make tm2 and tm2e independent from each other
@ 2017-01-05 9:13 ` Chanwoo Choi
0 siblings, 0 replies; 33+ messages in thread
From: Chanwoo Choi @ 2017-01-05 9:13 UTC (permalink / raw)
To: Jaechul Lee, Dmitry Torokhov, Rob Herring, Mark Rutland,
Catalin Marinas, Will Deacon, Kukjin Kim, Krzysztof Kozlowski,
Javier Martinez Canillas
Cc: Andi Shyti, beomho.seo, galaxyra, linux-arm-kernel, linux-input,
devicetree, linux-kernel, linux-samsung-soc
[-- Attachment #1: Type: text/plain, Size: 19424 bytes --]
Hi,
I add the some comment as following:
- ldo23/25/31/38 have the different value between tm2 and tm2e.
- The patch[1] was alread posted. I think you better to rebase this patch on patch[1].
[1] https://patchwork.kernel.org/patch/9491769/
- ("ARM64: dts: TM2: comply to the samsung pinctrl naming convention")
I add detailed comments on below.
On 2017년 01월 05일 17:27, Jaechul Lee wrote:
> From: Andi Shyti <andi.shyti@samsung.com>
>
> Currently tm2e dts includes tm2 but there are some differences
> between the two boards and tm2 has some properties that tm2e
> doesn't have.
>
> That's why it's important to keep the two dts files independent
> and put all the commonalities in a tm2-common.dtsi file.
>
> Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
> Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com>
> ---
> .../boot/dts/exynos/exynos5433-tm2-common.dtsi | 1116 +++++++++++++++++++
> arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 1138 +-------------------
> arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts | 2 +-
> 3 files changed, 1136 insertions(+), 1120 deletions(-)
> create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
> rewrite arch/arm64/boot/dts/exynos/exynos5433-tm2.dts (98%)
>
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
> new file mode 100644
> index 0000000..7ad0019
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
> @@ -0,0 +1,1116 @@
> +/*
> + * SAMSUNG Exynos5433 TM2 board device tree source
> + *
> + * Copyright (c) 2016 Samsung Electronics Co., Ltd.
> + *
> + * Device tree source file for Samsung's TM2 board which is based on
> + * Samsung Exynos5433 SoC.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +/dts-v1/;
> +#include "exynos5433.dtsi"
> +#include <dt-bindings/clock/samsung,s2mps11.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +
[snip]
> +&hsi2c_0 {
> + status = "okay";
> + clock-frequency = <2500000>;
> +
> + s2mps13-pmic@66 {
> + compatible = "samsung,s2mps13-pmic";
> + interrupt-parent = <&gpa0>;
> + interrupts = <7 IRQ_TYPE_NONE>;
> + reg = <0x66>;
> + samsung,s2mps11-wrstbi-ground;
> +
> + s2mps13_osc: clocks {
> + compatible = "samsung,s2mps13-clk";
> + #clock-cells = <1>;
> + clock-output-names = "s2mps13_ap", "s2mps13_cp",
> + "s2mps13_bt";
> + };
> +
> + regulators {
> + ldo1_reg: LDO1 {
> + regulator-name = "VDD_ALIVE_0.9V_AP";
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <900000>;
> + regulator-always-on;
> + };
> +
> + ldo2_reg: LDO2 {
> + regulator-name = "VDDQ_MMC2_2.8V_AP";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo3_reg: LDO3 {
> + regulator-name = "VDD1_E_1.8V_AP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + ldo4_reg: LDO4 {
> + regulator-name = "VDD10_MIF_PLL_1.0V_AP";
> + regulator-min-microvolt = <1300000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo5_reg: LDO5 {
> + regulator-name = "VDD10_DPLL_1.0V_AP";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo6_reg: LDO6 {
> + regulator-name = "VDD10_MIPI2L_1.0V_AP";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo7_reg: LDO7 {
> + regulator-name = "VDD18_MIPI2L_1.8V_AP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo8_reg: LDO8 {
> + regulator-name = "VDD18_LLI_1.8V_AP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo9_reg: LDO9 {
> + regulator-name = "VDD18_ABB_ETC_1.8V_AP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo10_reg: LDO10 {
> + regulator-name = "VDD33_USB30_3.0V_AP";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo11_reg: LDO11 {
> + regulator-name = "VDD_INT_M_1.0V_AP";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo12_reg: LDO12 {
> + regulator-name = "VDD_KFC_M_1.1V_AP";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-always-on;
> + };
> +
> + ldo13_reg: LDO13 {
> + regulator-name = "VDD_G3D_M_0.95V_AP";
> + regulator-min-microvolt = <950000>;
> + regulator-max-microvolt = <950000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo14_reg: LDO14 {
> + regulator-name = "VDDQ_M1_LDO_1.2V_AP";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo15_reg: LDO15 {
> + regulator-name = "VDDQ_M2_LDO_1.2V_AP";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo16_reg: LDO16 {
> + regulator-name = "VDDQ_EFUSE";
> + regulator-min-microvolt = <1400000>;
> + regulator-max-microvolt = <3400000>;
> + regulator-always-on;
> + };
> +
> + ldo17_reg: LDO17 {
> + regulator-name = "V_TFLASH_2.8V_AP";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + };
> +
> + ldo18_reg: LDO18 {
> + regulator-name = "V_CODEC_1.8V_AP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo19_reg: LDO19 {
> + regulator-name = "VDDA_1.8V_COMP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + ldo20_reg: LDO20 {
> + regulator-name = "VCC_2.8V_AP";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-always-on;
> + };
> +
> + ldo21_reg: LDO21 {
> + regulator-name = "VT_CAM_1.8V";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo22_reg: LDO22 {
> + regulator-name = "CAM_IO_1.8V_AP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo23_reg: LDO23 {
> + regulator-name = "CAM_SEN_CORE_1.2V_AP";
> + regulator-min-microvolt = <1050000>;
> + regulator-max-microvolt = <1200000>;
ldo23_reg has the different value between tm2 and tm2e.
- tm2 : name - CAM_SEN_CORE_1.2V_AP, max-microvolt :1200000
- tm2e : name - CAM_SEN_CORE_1.025V_AP, max-microvolt :1050000
> + };
> +
> + ldo24_reg: LDO24 {
> + regulator-name = "VT_CAM_1.2V";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + };
> +
> + ldo25_reg: LDO25 {
> + regulator-name = "CAM_SEN_A2.8V_AP";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + };
ldo25 is only used on TM2 and has the different name between tm2 and tm2e.
- tm2 : name - CAM_SEN_A2.8V_AP
- tm2e : name - UNUSED_LDO15
> +
> + ldo26_reg: LDO26 {
> + regulator-name = "CAM_AF_2.8V_AP";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + };
> +
> + ldo27_reg: LDO27 {
> + regulator-name = "VCC_3.0V_LCD_AP";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + };
> +
> + ldo28_reg: LDO28 {
> + regulator-name = "VCC_1.8V_LCD_AP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo29_reg: LDO29 {
> + regulator-name = "VT_CAM_2.8V";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + };
> +
> + ldo30_reg: LDO30 {
> + regulator-name = "TSP_AVDD_3.3V_AP";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + ldo31_reg: LDO31 {
> + regulator-name = "TSP_VDD_1.85V_AP";
> + regulator-min-microvolt = <1850000>;
> + regulator-max-microvolt = <1850000>;
> + };
ldo31_reg has the different value between tm2 and tm2e.
- tm2 : name - TSP_VDD_1.85V_AP, min/max-microvolt :1850000
- tm2e : name - TSP_VDD_1.8V_AP, min/max-microvolt :1800000
> +
> + ldo32_reg: LDO32 {
> + regulator-name = "VTOUCH_1.8V_AP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo33_reg: LDO33 {
> + regulator-name = "VTOUCH_LED_3.3V";
> + regulator-min-microvolt = <2500000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-ramp-delay = <12500>;
> + };
> +
> + ldo34_reg: LDO34 {
> + regulator-name = "VCC_1.8V_MHL_AP";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <2100000>;
> + };
> +
> + ldo35_reg: LDO35 {
> + regulator-name = "OIS_VM_2.8V";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2800000>;
> + };
> +
> + ldo36_reg: LDO36 {
> + regulator-name = "VSIL_1.0V";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + };
> +
> + ldo37_reg: LDO37 {
> + regulator-name = "VF_1.8V";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo38_reg: LDO38 {
> + regulator-name = "VCC_3.0V_MOTOR_AP";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + };
ldo38_reg has the different value between tm2 and tm2e.
- tm2 : name - VCC_3.0V_MOTOR_AP, min/max-microvolt :3000000
- tm2e : name - VCC_3.3V_MOTOR_AP, min/max-microvolt :3300000
> + regulator-off-in-suspend;
> + };
> + };
> +
> + buck2_reg: BUCK2 {
> + regulator-name = "VDD_EGL_1.0V_AP";
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + buck3_reg: BUCK3 {
> + regulator-name = "VDD_KFC_1.0V_AP";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + buck4_reg: BUCK4 {
> + regulator-name = "VDD_INT_0.95V_AP";
> + regulator-min-microvolt = <600000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + buck5_reg: BUCK5 {
> + regulator-name = "VDD_DISP_CAM0_0.9V_AP";
> + regulator-min-microvolt = <600000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + buck6_reg: BUCK6 {
> + regulator-name = "VDD_G3D_0.9V_AP";
> + regulator-min-microvolt = <600000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + buck7_reg: BUCK7 {
> + regulator-name = "VDD_MEM1_1.2V_AP";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-always-on;
> + };
> +
> + buck8_reg: BUCK8 {
> + regulator-name = "VDD_LLDO_1.35V_AP";
> + regulator-min-microvolt = <1350000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + buck9_reg: BUCK9 {
> + regulator-name = "VDD_MLDO_2.0V_AP";
> + regulator-min-microvolt = <1350000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + buck10_reg: BUCK10 {
> + regulator-name = "vdd_mem2";
> + regulator-min-microvolt = <550000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-always-on;
> + };
> + };
> + };
> +};
> +
> +&hsi2c_8 {
> + status = "okay";
> +
> + max77843@66 {
> + compatible = "maxim,max77843";
> + interrupt-parent = <&gpa1>;
> + interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
> + reg = <0x66>;
> +
> + muic: max77843-muic {
> + compatible = "maxim,max77843-muic";
> + };
> +
> + regulators {
> + compatible = "maxim,max77843-regulator";
> + safeout1_reg: SAFEOUT1 {
> + regulator-name = "SAFEOUT1";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <4950000>;
> + };
> +
> + safeout2_reg: SAFEOUT2 {
> + regulator-name = "SAFEOUT2";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <4950000>;
> + };
> +
> + charger_reg: CHARGER {
> + regulator-name = "CHARGER";
> + regulator-min-microamp = <100000>;
> + regulator-max-microamp = <3150000>;
> + };
> + };
> +
> + haptic: max77843-haptic {
> + compatible = "maxim,max77843-haptic";
> + haptic-supply = <&ldo38_reg>;
> + pwms = <&pwm 0 33670 0>;
> + pwm-names = "haptic";
> + };
> + };
> +};
> +
> +&i2s0 {
> + status = "okay";
> +};
> +
> +&mshc_0 {
> + status = "okay";
> + num-slots = <1>;
> + mmc-hs200-1_8v;
> + mmc-hs400-1_8v;
> + cap-mmc-highspeed;
> + non-removable;
> + card-detect-delay = <200>;
> + samsung,dw-mshc-ciu-div = <3>;
> + samsung,dw-mshc-sdr-timing = <0 4>;
> + samsung,dw-mshc-ddr-timing = <0 2>;
> + samsung,dw-mshc-hs400-timing = <0 3>;
> + samsung,read-strobe-delay = <90>;
> + fifo-depth = <0x80>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4
> + &sd0_bus8 &sd0_rdqs>;
> + bus-width = <8>;
> + assigned-clocks = <&cmu_top CLK_SCLK_MMC0_FSYS>;
> + assigned-clock-rates = <800000000>;
> +};
> +
> +&mshc_2 {
> + status = "okay";
> + num-slots = <1>;
> + cap-sd-highspeed;
> + disable-wp;
> + cd-gpios = <&gpa2 4 GPIO_ACTIVE_HIGH>;
> + cd-inverted;
> + card-detect-delay = <200>;
> + samsung,dw-mshc-ciu-div = <3>;
> + samsung,dw-mshc-sdr-timing = <0 4>;
> + samsung,dw-mshc-ddr-timing = <0 2>;
> + fifo-depth = <0x80>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>;
> + bus-width = <4>;
> +};
> +
> +&ppmu_d0_general {
> + status = "okay";
> + events {
> + ppmu_event0_d0_general: ppmu-event0-d0-general {
> + event-name = "ppmu-event0-d0-general";
> + };
> + };
> +};
> +
> +&ppmu_d1_general {
> + status = "okay";
> + events {
> + ppmu_event0_d1_general: ppmu-event0-d1-general {
> + event-name = "ppmu-event0-d1-general";
> + };
> + };
> +};
> +
> +&pinctrl_alive {
> + pinctrl-names = "default";
> + pinctrl-0 = <&initial_alive>;
> +
The following patches[1] touch the tm2.dts file about pinctrl naming convention.
So, I recommend that this patch shoud be rebased on patch[1] to prevent the merge conflict.
[1] https://patchwork.kernel.org/patch/9491769/
- ("ARM64: dts: TM2: comply to the samsung pinctrl naming convention")
> + initial_alive: initial-state {
> + PIN(IN, gpa0-0, DOWN, LV1);
> + PIN(IN, gpa0-1, NONE, LV1);
> + PIN(IN, gpa0-2, DOWN, LV1);
> + PIN(IN, gpa0-3, NONE, LV1);
> + PIN(IN, gpa0-4, NONE, LV1);
> + PIN(IN, gpa0-5, DOWN, LV1);
> + PIN(IN, gpa0-6, NONE, LV1);
> + PIN(IN, gpa0-7, NONE, LV1);
> +
> + PIN(IN, gpa1-0, UP, LV1);
> + PIN(IN, gpa1-1, NONE, LV1);
> + PIN(IN, gpa1-2, NONE, LV1);
> + PIN(IN, gpa1-3, DOWN, LV1);
> + PIN(IN, gpa1-4, DOWN, LV1);
> + PIN(IN, gpa1-5, NONE, LV1);
> + PIN(IN, gpa1-6, NONE, LV1);
> + PIN(IN, gpa1-7, NONE, LV1);
> +
> + PIN(IN, gpa2-0, NONE, LV1);
> + PIN(IN, gpa2-1, NONE, LV1);
> + PIN(IN, gpa2-2, NONE, LV1);
> + PIN(IN, gpa2-3, DOWN, LV1);
> + PIN(IN, gpa2-4, NONE, LV1);
> + PIN(IN, gpa2-5, DOWN, LV1);
> + PIN(IN, gpa2-6, DOWN, LV1);
> + PIN(IN, gpa2-7, NONE, LV1);
> +
> + PIN(IN, gpa3-0, DOWN, LV1);
> + PIN(IN, gpa3-1, DOWN, LV1);
> + PIN(IN, gpa3-2, NONE, LV1);
> + PIN(IN, gpa3-3, DOWN, LV1);
> + PIN(IN, gpa3-4, NONE, LV1);
> + PIN(IN, gpa3-5, DOWN, LV1);
> + PIN(IN, gpa3-6, DOWN, LV1);
> + PIN(IN, gpa3-7, DOWN, LV1);
> +
> + PIN(IN, gpf1-0, NONE, LV1);
> + PIN(IN, gpf1-1, NONE, LV1);
> + PIN(IN, gpf1-2, DOWN, LV1);
> + PIN(IN, gpf1-4, UP, LV1);
> + PIN(OUT, gpf1-5, NONE, LV1);
> + PIN(IN, gpf1-6, DOWN, LV1);
> + PIN(IN, gpf1-7, DOWN, LV1);
> +
> + PIN(IN, gpf2-0, DOWN, LV1);
> + PIN(IN, gpf2-1, DOWN, LV1);
> + PIN(IN, gpf2-2, DOWN, LV1);
> + PIN(IN, gpf2-3, DOWN, LV1);
> +
> + PIN(IN, gpf3-0, DOWN, LV1);
> + PIN(IN, gpf3-1, DOWN, LV1);
> + PIN(IN, gpf3-2, NONE, LV1);
> + PIN(IN, gpf3-3, DOWN, LV1);
> +
> + PIN(IN, gpf4-0, DOWN, LV1);
> + PIN(IN, gpf4-1, DOWN, LV1);
> + PIN(IN, gpf4-2, DOWN, LV1);
> + PIN(IN, gpf4-3, DOWN, LV1);
> + PIN(IN, gpf4-4, DOWN, LV1);
> + PIN(IN, gpf4-5, DOWN, LV1);
> + PIN(IN, gpf4-6, DOWN, LV1);
> + PIN(IN, gpf4-7, DOWN, LV1);
> +
> + PIN(IN, gpf5-0, DOWN, LV1);
> + PIN(IN, gpf5-1, DOWN, LV1);
> + PIN(IN, gpf5-2, DOWN, LV1);
> + PIN(IN, gpf5-3, DOWN, LV1);
> + PIN(OUT, gpf5-4, NONE, LV1);
> + PIN(IN, gpf5-5, DOWN, LV1);
> + PIN(IN, gpf5-6, DOWN, LV1);
> + PIN(IN, gpf5-7, DOWN, LV1);
> + };
[snip]
> +/*
> + * SAMSUNG Exynos5433 TM2 board device tree source
> + *
> + * Copyright (c) 2016 Samsung Electronics Co., Ltd.
> + *
> + * Device tree source file for Samsung's TM2 board which is based on
> + * Samsung Exynos5433 SoC.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include "exynos5433-tm2-common.dtsi"
> +
> +/ {
> + model = "Samsung TM2 board";
> + compatible = "samsung,tm2", "samsung,exynos5433";
> +};
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
> index 1db4e7f..81fdbef 100644
> --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
> @@ -11,7 +11,7 @@
> * published by the Free Software Foundation.
> */
>
> -#include "exynos5433-tm2.dts"
> +#include "exynos5433-tm2-common.dtsi"
>
> / {
> model = "Samsung TM2E board";
>
--
Best Regards,
Chanwoo Choi
Samsung Electronics
[-- Attachment #2: cw00_choi.vcf --]
[-- Type: text/x-vcard, Size: 6 bytes --]
null
^ permalink raw reply [flat|nested] 33+ messages in thread* [PATCH v2 3/4] arm64: dts: exynos: make tm2 and tm2e independent from each other
@ 2017-01-05 9:13 ` Chanwoo Choi
0 siblings, 0 replies; 33+ messages in thread
From: Chanwoo Choi @ 2017-01-05 9:13 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
I add the some comment as following:
- ldo23/25/31/38 have the different value between tm2 and tm2e.
- The patch[1] was alread posted. I think you better to rebase this patch on patch[1].
[1] https://patchwork.kernel.org/patch/9491769/
- ("ARM64: dts: TM2: comply to the samsung pinctrl naming convention")
I add detailed comments on below.
On 2017? 01? 05? 17:27, Jaechul Lee wrote:
> From: Andi Shyti <andi.shyti@samsung.com>
>
> Currently tm2e dts includes tm2 but there are some differences
> between the two boards and tm2 has some properties that tm2e
> doesn't have.
>
> That's why it's important to keep the two dts files independent
> and put all the commonalities in a tm2-common.dtsi file.
>
> Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
> Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com>
> ---
> .../boot/dts/exynos/exynos5433-tm2-common.dtsi | 1116 +++++++++++++++++++
> arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 1138 +-------------------
> arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts | 2 +-
> 3 files changed, 1136 insertions(+), 1120 deletions(-)
> create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
> rewrite arch/arm64/boot/dts/exynos/exynos5433-tm2.dts (98%)
>
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
> new file mode 100644
> index 0000000..7ad0019
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
> @@ -0,0 +1,1116 @@
> +/*
> + * SAMSUNG Exynos5433 TM2 board device tree source
> + *
> + * Copyright (c) 2016 Samsung Electronics Co., Ltd.
> + *
> + * Device tree source file for Samsung's TM2 board which is based on
> + * Samsung Exynos5433 SoC.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +/dts-v1/;
> +#include "exynos5433.dtsi"
> +#include <dt-bindings/clock/samsung,s2mps11.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +
[snip]
> +&hsi2c_0 {
> + status = "okay";
> + clock-frequency = <2500000>;
> +
> + s2mps13-pmic at 66 {
> + compatible = "samsung,s2mps13-pmic";
> + interrupt-parent = <&gpa0>;
> + interrupts = <7 IRQ_TYPE_NONE>;
> + reg = <0x66>;
> + samsung,s2mps11-wrstbi-ground;
> +
> + s2mps13_osc: clocks {
> + compatible = "samsung,s2mps13-clk";
> + #clock-cells = <1>;
> + clock-output-names = "s2mps13_ap", "s2mps13_cp",
> + "s2mps13_bt";
> + };
> +
> + regulators {
> + ldo1_reg: LDO1 {
> + regulator-name = "VDD_ALIVE_0.9V_AP";
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <900000>;
> + regulator-always-on;
> + };
> +
> + ldo2_reg: LDO2 {
> + regulator-name = "VDDQ_MMC2_2.8V_AP";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo3_reg: LDO3 {
> + regulator-name = "VDD1_E_1.8V_AP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + ldo4_reg: LDO4 {
> + regulator-name = "VDD10_MIF_PLL_1.0V_AP";
> + regulator-min-microvolt = <1300000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo5_reg: LDO5 {
> + regulator-name = "VDD10_DPLL_1.0V_AP";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo6_reg: LDO6 {
> + regulator-name = "VDD10_MIPI2L_1.0V_AP";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo7_reg: LDO7 {
> + regulator-name = "VDD18_MIPI2L_1.8V_AP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo8_reg: LDO8 {
> + regulator-name = "VDD18_LLI_1.8V_AP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo9_reg: LDO9 {
> + regulator-name = "VDD18_ABB_ETC_1.8V_AP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo10_reg: LDO10 {
> + regulator-name = "VDD33_USB30_3.0V_AP";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo11_reg: LDO11 {
> + regulator-name = "VDD_INT_M_1.0V_AP";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo12_reg: LDO12 {
> + regulator-name = "VDD_KFC_M_1.1V_AP";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-always-on;
> + };
> +
> + ldo13_reg: LDO13 {
> + regulator-name = "VDD_G3D_M_0.95V_AP";
> + regulator-min-microvolt = <950000>;
> + regulator-max-microvolt = <950000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo14_reg: LDO14 {
> + regulator-name = "VDDQ_M1_LDO_1.2V_AP";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo15_reg: LDO15 {
> + regulator-name = "VDDQ_M2_LDO_1.2V_AP";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + ldo16_reg: LDO16 {
> + regulator-name = "VDDQ_EFUSE";
> + regulator-min-microvolt = <1400000>;
> + regulator-max-microvolt = <3400000>;
> + regulator-always-on;
> + };
> +
> + ldo17_reg: LDO17 {
> + regulator-name = "V_TFLASH_2.8V_AP";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + };
> +
> + ldo18_reg: LDO18 {
> + regulator-name = "V_CODEC_1.8V_AP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo19_reg: LDO19 {
> + regulator-name = "VDDA_1.8V_COMP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + ldo20_reg: LDO20 {
> + regulator-name = "VCC_2.8V_AP";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-always-on;
> + };
> +
> + ldo21_reg: LDO21 {
> + regulator-name = "VT_CAM_1.8V";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo22_reg: LDO22 {
> + regulator-name = "CAM_IO_1.8V_AP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo23_reg: LDO23 {
> + regulator-name = "CAM_SEN_CORE_1.2V_AP";
> + regulator-min-microvolt = <1050000>;
> + regulator-max-microvolt = <1200000>;
ldo23_reg has the different value between tm2 and tm2e.
- tm2 : name - CAM_SEN_CORE_1.2V_AP, max-microvolt :1200000
- tm2e : name - CAM_SEN_CORE_1.025V_AP, max-microvolt :1050000
> + };
> +
> + ldo24_reg: LDO24 {
> + regulator-name = "VT_CAM_1.2V";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + };
> +
> + ldo25_reg: LDO25 {
> + regulator-name = "CAM_SEN_A2.8V_AP";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + };
ldo25 is only used on TM2 and has the different name between tm2 and tm2e.
- tm2 : name - CAM_SEN_A2.8V_AP
- tm2e : name - UNUSED_LDO15
> +
> + ldo26_reg: LDO26 {
> + regulator-name = "CAM_AF_2.8V_AP";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + };
> +
> + ldo27_reg: LDO27 {
> + regulator-name = "VCC_3.0V_LCD_AP";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + };
> +
> + ldo28_reg: LDO28 {
> + regulator-name = "VCC_1.8V_LCD_AP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo29_reg: LDO29 {
> + regulator-name = "VT_CAM_2.8V";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + };
> +
> + ldo30_reg: LDO30 {
> + regulator-name = "TSP_AVDD_3.3V_AP";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + ldo31_reg: LDO31 {
> + regulator-name = "TSP_VDD_1.85V_AP";
> + regulator-min-microvolt = <1850000>;
> + regulator-max-microvolt = <1850000>;
> + };
ldo31_reg has the different value between tm2 and tm2e.
- tm2 : name - TSP_VDD_1.85V_AP, min/max-microvolt :1850000
- tm2e : name - TSP_VDD_1.8V_AP, min/max-microvolt :1800000
> +
> + ldo32_reg: LDO32 {
> + regulator-name = "VTOUCH_1.8V_AP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo33_reg: LDO33 {
> + regulator-name = "VTOUCH_LED_3.3V";
> + regulator-min-microvolt = <2500000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-ramp-delay = <12500>;
> + };
> +
> + ldo34_reg: LDO34 {
> + regulator-name = "VCC_1.8V_MHL_AP";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <2100000>;
> + };
> +
> + ldo35_reg: LDO35 {
> + regulator-name = "OIS_VM_2.8V";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2800000>;
> + };
> +
> + ldo36_reg: LDO36 {
> + regulator-name = "VSIL_1.0V";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + };
> +
> + ldo37_reg: LDO37 {
> + regulator-name = "VF_1.8V";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo38_reg: LDO38 {
> + regulator-name = "VCC_3.0V_MOTOR_AP";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + };
ldo38_reg has the different value between tm2 and tm2e.
- tm2 : name - VCC_3.0V_MOTOR_AP, min/max-microvolt :3000000
- tm2e : name - VCC_3.3V_MOTOR_AP, min/max-microvolt :3300000
> + regulator-off-in-suspend;
> + };
> + };
> +
> + buck2_reg: BUCK2 {
> + regulator-name = "VDD_EGL_1.0V_AP";
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + buck3_reg: BUCK3 {
> + regulator-name = "VDD_KFC_1.0V_AP";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + buck4_reg: BUCK4 {
> + regulator-name = "VDD_INT_0.95V_AP";
> + regulator-min-microvolt = <600000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + buck5_reg: BUCK5 {
> + regulator-name = "VDD_DISP_CAM0_0.9V_AP";
> + regulator-min-microvolt = <600000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + buck6_reg: BUCK6 {
> + regulator-name = "VDD_G3D_0.9V_AP";
> + regulator-min-microvolt = <600000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-always-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + buck7_reg: BUCK7 {
> + regulator-name = "VDD_MEM1_1.2V_AP";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-always-on;
> + };
> +
> + buck8_reg: BUCK8 {
> + regulator-name = "VDD_LLDO_1.35V_AP";
> + regulator-min-microvolt = <1350000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + buck9_reg: BUCK9 {
> + regulator-name = "VDD_MLDO_2.0V_AP";
> + regulator-min-microvolt = <1350000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + buck10_reg: BUCK10 {
> + regulator-name = "vdd_mem2";
> + regulator-min-microvolt = <550000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-always-on;
> + };
> + };
> + };
> +};
> +
> +&hsi2c_8 {
> + status = "okay";
> +
> + max77843 at 66 {
> + compatible = "maxim,max77843";
> + interrupt-parent = <&gpa1>;
> + interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
> + reg = <0x66>;
> +
> + muic: max77843-muic {
> + compatible = "maxim,max77843-muic";
> + };
> +
> + regulators {
> + compatible = "maxim,max77843-regulator";
> + safeout1_reg: SAFEOUT1 {
> + regulator-name = "SAFEOUT1";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <4950000>;
> + };
> +
> + safeout2_reg: SAFEOUT2 {
> + regulator-name = "SAFEOUT2";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <4950000>;
> + };
> +
> + charger_reg: CHARGER {
> + regulator-name = "CHARGER";
> + regulator-min-microamp = <100000>;
> + regulator-max-microamp = <3150000>;
> + };
> + };
> +
> + haptic: max77843-haptic {
> + compatible = "maxim,max77843-haptic";
> + haptic-supply = <&ldo38_reg>;
> + pwms = <&pwm 0 33670 0>;
> + pwm-names = "haptic";
> + };
> + };
> +};
> +
> +&i2s0 {
> + status = "okay";
> +};
> +
> +&mshc_0 {
> + status = "okay";
> + num-slots = <1>;
> + mmc-hs200-1_8v;
> + mmc-hs400-1_8v;
> + cap-mmc-highspeed;
> + non-removable;
> + card-detect-delay = <200>;
> + samsung,dw-mshc-ciu-div = <3>;
> + samsung,dw-mshc-sdr-timing = <0 4>;
> + samsung,dw-mshc-ddr-timing = <0 2>;
> + samsung,dw-mshc-hs400-timing = <0 3>;
> + samsung,read-strobe-delay = <90>;
> + fifo-depth = <0x80>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4
> + &sd0_bus8 &sd0_rdqs>;
> + bus-width = <8>;
> + assigned-clocks = <&cmu_top CLK_SCLK_MMC0_FSYS>;
> + assigned-clock-rates = <800000000>;
> +};
> +
> +&mshc_2 {
> + status = "okay";
> + num-slots = <1>;
> + cap-sd-highspeed;
> + disable-wp;
> + cd-gpios = <&gpa2 4 GPIO_ACTIVE_HIGH>;
> + cd-inverted;
> + card-detect-delay = <200>;
> + samsung,dw-mshc-ciu-div = <3>;
> + samsung,dw-mshc-sdr-timing = <0 4>;
> + samsung,dw-mshc-ddr-timing = <0 2>;
> + fifo-depth = <0x80>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>;
> + bus-width = <4>;
> +};
> +
> +&ppmu_d0_general {
> + status = "okay";
> + events {
> + ppmu_event0_d0_general: ppmu-event0-d0-general {
> + event-name = "ppmu-event0-d0-general";
> + };
> + };
> +};
> +
> +&ppmu_d1_general {
> + status = "okay";
> + events {
> + ppmu_event0_d1_general: ppmu-event0-d1-general {
> + event-name = "ppmu-event0-d1-general";
> + };
> + };
> +};
> +
> +&pinctrl_alive {
> + pinctrl-names = "default";
> + pinctrl-0 = <&initial_alive>;
> +
The following patches[1] touch the tm2.dts file about pinctrl naming convention.
So, I recommend that this patch shoud be rebased on patch[1] to prevent the merge conflict.
[1] https://patchwork.kernel.org/patch/9491769/
- ("ARM64: dts: TM2: comply to the samsung pinctrl naming convention")
> + initial_alive: initial-state {
> + PIN(IN, gpa0-0, DOWN, LV1);
> + PIN(IN, gpa0-1, NONE, LV1);
> + PIN(IN, gpa0-2, DOWN, LV1);
> + PIN(IN, gpa0-3, NONE, LV1);
> + PIN(IN, gpa0-4, NONE, LV1);
> + PIN(IN, gpa0-5, DOWN, LV1);
> + PIN(IN, gpa0-6, NONE, LV1);
> + PIN(IN, gpa0-7, NONE, LV1);
> +
> + PIN(IN, gpa1-0, UP, LV1);
> + PIN(IN, gpa1-1, NONE, LV1);
> + PIN(IN, gpa1-2, NONE, LV1);
> + PIN(IN, gpa1-3, DOWN, LV1);
> + PIN(IN, gpa1-4, DOWN, LV1);
> + PIN(IN, gpa1-5, NONE, LV1);
> + PIN(IN, gpa1-6, NONE, LV1);
> + PIN(IN, gpa1-7, NONE, LV1);
> +
> + PIN(IN, gpa2-0, NONE, LV1);
> + PIN(IN, gpa2-1, NONE, LV1);
> + PIN(IN, gpa2-2, NONE, LV1);
> + PIN(IN, gpa2-3, DOWN, LV1);
> + PIN(IN, gpa2-4, NONE, LV1);
> + PIN(IN, gpa2-5, DOWN, LV1);
> + PIN(IN, gpa2-6, DOWN, LV1);
> + PIN(IN, gpa2-7, NONE, LV1);
> +
> + PIN(IN, gpa3-0, DOWN, LV1);
> + PIN(IN, gpa3-1, DOWN, LV1);
> + PIN(IN, gpa3-2, NONE, LV1);
> + PIN(IN, gpa3-3, DOWN, LV1);
> + PIN(IN, gpa3-4, NONE, LV1);
> + PIN(IN, gpa3-5, DOWN, LV1);
> + PIN(IN, gpa3-6, DOWN, LV1);
> + PIN(IN, gpa3-7, DOWN, LV1);
> +
> + PIN(IN, gpf1-0, NONE, LV1);
> + PIN(IN, gpf1-1, NONE, LV1);
> + PIN(IN, gpf1-2, DOWN, LV1);
> + PIN(IN, gpf1-4, UP, LV1);
> + PIN(OUT, gpf1-5, NONE, LV1);
> + PIN(IN, gpf1-6, DOWN, LV1);
> + PIN(IN, gpf1-7, DOWN, LV1);
> +
> + PIN(IN, gpf2-0, DOWN, LV1);
> + PIN(IN, gpf2-1, DOWN, LV1);
> + PIN(IN, gpf2-2, DOWN, LV1);
> + PIN(IN, gpf2-3, DOWN, LV1);
> +
> + PIN(IN, gpf3-0, DOWN, LV1);
> + PIN(IN, gpf3-1, DOWN, LV1);
> + PIN(IN, gpf3-2, NONE, LV1);
> + PIN(IN, gpf3-3, DOWN, LV1);
> +
> + PIN(IN, gpf4-0, DOWN, LV1);
> + PIN(IN, gpf4-1, DOWN, LV1);
> + PIN(IN, gpf4-2, DOWN, LV1);
> + PIN(IN, gpf4-3, DOWN, LV1);
> + PIN(IN, gpf4-4, DOWN, LV1);
> + PIN(IN, gpf4-5, DOWN, LV1);
> + PIN(IN, gpf4-6, DOWN, LV1);
> + PIN(IN, gpf4-7, DOWN, LV1);
> +
> + PIN(IN, gpf5-0, DOWN, LV1);
> + PIN(IN, gpf5-1, DOWN, LV1);
> + PIN(IN, gpf5-2, DOWN, LV1);
> + PIN(IN, gpf5-3, DOWN, LV1);
> + PIN(OUT, gpf5-4, NONE, LV1);
> + PIN(IN, gpf5-5, DOWN, LV1);
> + PIN(IN, gpf5-6, DOWN, LV1);
> + PIN(IN, gpf5-7, DOWN, LV1);
> + };
[snip]
> +/*
> + * SAMSUNG Exynos5433 TM2 board device tree source
> + *
> + * Copyright (c) 2016 Samsung Electronics Co., Ltd.
> + *
> + * Device tree source file for Samsung's TM2 board which is based on
> + * Samsung Exynos5433 SoC.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include "exynos5433-tm2-common.dtsi"
> +
> +/ {
> + model = "Samsung TM2 board";
> + compatible = "samsung,tm2", "samsung,exynos5433";
> +};
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
> index 1db4e7f..81fdbef 100644
> --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
> @@ -11,7 +11,7 @@
> * published by the Free Software Foundation.
> */
>
> -#include "exynos5433-tm2.dts"
> +#include "exynos5433-tm2-common.dtsi"
>
> / {
> model = "Samsung TM2E board";
>
--
Best Regards,
Chanwoo Choi
Samsung Electronics
-------------- next part --------------
A non-text attachment was scrubbed...
Name: cw00_choi.vcf
Type: text/x-vcard
Size: 6 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170105/d2385d99/attachment-0001.vcf>
^ permalink raw reply [flat|nested] 33+ messages in thread* Re: [PATCH v2 3/4] arm64: dts: exynos: make tm2 and tm2e independent from each other
2017-01-05 9:13 ` Chanwoo Choi
(?)
@ 2017-01-05 9:23 ` Andi Shyti
-1 siblings, 0 replies; 33+ messages in thread
From: Andi Shyti @ 2017-01-05 9:23 UTC (permalink / raw)
To: Chanwoo Choi
Cc: Mark Rutland, devicetree, linux-samsung-soc, Dmitry Torokhov,
Catalin Marinas, Jaechul Lee, Will Deacon, linux-kernel,
Krzysztof Kozlowski, Javier Martinez Canillas, Rob Herring,
Kukjin Kim, linux-input, galaxyra, beomho.seo, linux-arm-kernel
Hi Chanwoo,
> I add the some comment as following:
> - ldo23/25/31/38 have the different value between tm2 and tm2e.
Thanks for pointing this out. I planned to do this already in a
following patch as for now I think it's out from the scope of this
particular patch.
> - The patch[1] was alread posted. I think you better to rebase this patch on patch[1].
> [1] https://patchwork.kernel.org/patch/9491769/
> - ("ARM64: dts: TM2: comply to the samsung pinctrl naming convention")
Yes, I also thought about this, but I didn't know whether it was
already picked by anyone. I didn't want to stop Jaechul that's
why I was planning to rebase the other rather than this.
But you are right, because some bits of the other patches I know
that have been merged. Thank you!
Krzysztof, do you mind if I send patch 3 as a reply to this
e-mail? The changes should not affect patch 4, anyway.
Thanks,
Andi
^ permalink raw reply [flat|nested] 33+ messages in thread* Re: [PATCH v2 3/4] arm64: dts: exynos: make tm2 and tm2e independent from each other
@ 2017-01-05 9:23 ` Andi Shyti
0 siblings, 0 replies; 33+ messages in thread
From: Andi Shyti @ 2017-01-05 9:23 UTC (permalink / raw)
To: Chanwoo Choi
Cc: Jaechul Lee, Dmitry Torokhov, Rob Herring, Mark Rutland,
Catalin Marinas, Will Deacon, Kukjin Kim, Krzysztof Kozlowski,
Javier Martinez Canillas, beomho.seo, galaxyra, linux-arm-kernel,
linux-input, devicetree, linux-kernel, linux-samsung-soc
Hi Chanwoo,
> I add the some comment as following:
> - ldo23/25/31/38 have the different value between tm2 and tm2e.
Thanks for pointing this out. I planned to do this already in a
following patch as for now I think it's out from the scope of this
particular patch.
> - The patch[1] was alread posted. I think you better to rebase this patch on patch[1].
> [1] https://patchwork.kernel.org/patch/9491769/
> - ("ARM64: dts: TM2: comply to the samsung pinctrl naming convention")
Yes, I also thought about this, but I didn't know whether it was
already picked by anyone. I didn't want to stop Jaechul that's
why I was planning to rebase the other rather than this.
But you are right, because some bits of the other patches I know
that have been merged. Thank you!
Krzysztof, do you mind if I send patch 3 as a reply to this
e-mail? The changes should not affect patch 4, anyway.
Thanks,
Andi
^ permalink raw reply [flat|nested] 33+ messages in thread* [PATCH v2 3/4] arm64: dts: exynos: make tm2 and tm2e independent from each other
@ 2017-01-05 9:23 ` Andi Shyti
0 siblings, 0 replies; 33+ messages in thread
From: Andi Shyti @ 2017-01-05 9:23 UTC (permalink / raw)
To: linux-arm-kernel
Hi Chanwoo,
> I add the some comment as following:
> - ldo23/25/31/38 have the different value between tm2 and tm2e.
Thanks for pointing this out. I planned to do this already in a
following patch as for now I think it's out from the scope of this
particular patch.
> - The patch[1] was alread posted. I think you better to rebase this patch on patch[1].
> [1] https://patchwork.kernel.org/patch/9491769/
> - ("ARM64: dts: TM2: comply to the samsung pinctrl naming convention")
Yes, I also thought about this, but I didn't know whether it was
already picked by anyone. I didn't want to stop Jaechul that's
why I was planning to rebase the other rather than this.
But you are right, because some bits of the other patches I know
that have been merged. Thank you!
Krzysztof, do you mind if I send patch 3 as a reply to this
e-mail? The changes should not affect patch 4, anyway.
Thanks,
Andi
^ permalink raw reply [flat|nested] 33+ messages in thread* Re: [PATCH v2 3/4] arm64: dts: exynos: make tm2 and tm2e independent from each other
2017-01-05 9:23 ` Andi Shyti
@ 2017-01-05 9:29 ` Chanwoo Choi
-1 siblings, 0 replies; 33+ messages in thread
From: Chanwoo Choi @ 2017-01-05 9:29 UTC (permalink / raw)
To: Andi Shyti
Cc: Jaechul Lee, Dmitry Torokhov, Rob Herring, Mark Rutland,
Catalin Marinas, Will Deacon, Kukjin Kim, Krzysztof Kozlowski,
Javier Martinez Canillas, beomho.seo, galaxyra, linux-arm-kernel,
linux-input, devicetree, linux-kernel, linux-samsung-soc
[-- Attachment #1: Type: text/plain, Size: 1321 bytes --]
Hi,
On 2017년 01월 05일 18:23, Andi Shyti wrote:
> Hi Chanwoo,
>
>> I add the some comment as following:
>> - ldo23/25/31/38 have the different value between tm2 and tm2e.
>
> Thanks for pointing this out. I planned to do this already in a
> following patch as for now I think it's out from the scope of this
> particular patch.
I think it is very simple work. If you want to make the common.dtsi,
I think that you have to separate the different thing on each exynos5433-tm2X.dts.
>
>> - The patch[1] was alread posted. I think you better to rebase this patch on patch[1].
>> [1] https://patchwork.kernel.org/patch/9491769/
>> - ("ARM64: dts: TM2: comply to the samsung pinctrl naming convention")
>
> Yes, I also thought about this, but I didn't know whether it was
> already picked by anyone. I didn't want to stop Jaechul that's
> why I was planning to rebase the other rather than this.
> But you are right, because some bits of the other patches I know
> that have been merged. Thank you!
>
> Krzysztof, do you mind if I send patch 3 as a reply to this
> e-mail? The changes should not affect patch 4, anyway.
No, If exynos5433-tm2.dts includes the different value of regulator,
patch4 might be implemented based on patch3.
>
> Thanks,
> Andi
>
>
--
Best Regards,
Chanwoo Choi
Samsung Electronics
[-- Attachment #2: cw00_choi.vcf --]
[-- Type: text/x-vcard, Size: 6 bytes --]
null
^ permalink raw reply [flat|nested] 33+ messages in thread* [PATCH v2 3/4] arm64: dts: exynos: make tm2 and tm2e independent from each other
@ 2017-01-05 9:29 ` Chanwoo Choi
0 siblings, 0 replies; 33+ messages in thread
From: Chanwoo Choi @ 2017-01-05 9:29 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
On 2017? 01? 05? 18:23, Andi Shyti wrote:
> Hi Chanwoo,
>
>> I add the some comment as following:
>> - ldo23/25/31/38 have the different value between tm2 and tm2e.
>
> Thanks for pointing this out. I planned to do this already in a
> following patch as for now I think it's out from the scope of this
> particular patch.
I think it is very simple work. If you want to make the common.dtsi,
I think that you have to separate the different thing on each exynos5433-tm2X.dts.
>
>> - The patch[1] was alread posted. I think you better to rebase this patch on patch[1].
>> [1] https://patchwork.kernel.org/patch/9491769/
>> - ("ARM64: dts: TM2: comply to the samsung pinctrl naming convention")
>
> Yes, I also thought about this, but I didn't know whether it was
> already picked by anyone. I didn't want to stop Jaechul that's
> why I was planning to rebase the other rather than this.
> But you are right, because some bits of the other patches I know
> that have been merged. Thank you!
>
> Krzysztof, do you mind if I send patch 3 as a reply to this
> e-mail? The changes should not affect patch 4, anyway.
No, If exynos5433-tm2.dts includes the different value of regulator,
patch4 might be implemented based on patch3.
>
> Thanks,
> Andi
>
>
--
Best Regards,
Chanwoo Choi
Samsung Electronics
-------------- next part --------------
A non-text attachment was scrubbed...
Name: cw00_choi.vcf
Type: text/x-vcard
Size: 6 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170105/a88c27f7/attachment-0001.vcf>
^ permalink raw reply [flat|nested] 33+ messages in thread* Re: [PATCH v2 3/4] arm64: dts: exynos: make tm2 and tm2e independent from each other
2017-01-05 9:29 ` Chanwoo Choi
(?)
@ 2017-01-05 9:33 ` Andi Shyti
-1 siblings, 0 replies; 33+ messages in thread
From: Andi Shyti @ 2017-01-05 9:33 UTC (permalink / raw)
To: Chanwoo Choi
Cc: Mark Rutland, devicetree, linux-samsung-soc, Dmitry Torokhov,
Catalin Marinas, Jaechul Lee, Will Deacon, linux-kernel,
Krzysztof Kozlowski, Javier Martinez Canillas, Rob Herring,
Kukjin Kim, linux-input, galaxyra, beomho.seo, linux-arm-kernel
Hi Chanwoo,
> >> I add the some comment as following:
> >> - ldo23/25/31/38 have the different value between tm2 and tm2e.
> >
> > Thanks for pointing this out. I planned to do this already in a
> > following patch as for now I think it's out from the scope of this
> > particular patch.
>
> I think it is very simple work. If you want to make the common.dtsi,
> I think that you have to separate the different thing on each exynos5433-tm2X.dts.
>
> >
> >> - The patch[1] was alread posted. I think you better to rebase this patch on patch[1].
> >> [1] https://patchwork.kernel.org/patch/9491769/
> >> - ("ARM64: dts: TM2: comply to the samsung pinctrl naming convention")
> >
> > Yes, I also thought about this, but I didn't know whether it was
> > already picked by anyone. I didn't want to stop Jaechul that's
> > why I was planning to rebase the other rather than this.
> > But you are right, because some bits of the other patches I know
> > that have been merged. Thank you!
> >
> > Krzysztof, do you mind if I send patch 3 as a reply to this
> > e-mail? The changes should not affect patch 4, anyway.
>
> No, If exynos5433-tm2.dts includes the different value of regulator,
> patch4 might be implemented based on patch3.
OK, I will re-work the patch 3 with the regulators and generate
again patch 4.
Thanks,
Andi
^ permalink raw reply [flat|nested] 33+ messages in thread* Re: [PATCH v2 3/4] arm64: dts: exynos: make tm2 and tm2e independent from each other
@ 2017-01-05 9:33 ` Andi Shyti
0 siblings, 0 replies; 33+ messages in thread
From: Andi Shyti @ 2017-01-05 9:33 UTC (permalink / raw)
To: Chanwoo Choi
Cc: Jaechul Lee, Dmitry Torokhov, Rob Herring, Mark Rutland,
Catalin Marinas, Will Deacon, Kukjin Kim, Krzysztof Kozlowski,
Javier Martinez Canillas, beomho.seo, galaxyra, linux-arm-kernel,
linux-input, devicetree, linux-kernel, linux-samsung-soc
Hi Chanwoo,
> >> I add the some comment as following:
> >> - ldo23/25/31/38 have the different value between tm2 and tm2e.
> >
> > Thanks for pointing this out. I planned to do this already in a
> > following patch as for now I think it's out from the scope of this
> > particular patch.
>
> I think it is very simple work. If you want to make the common.dtsi,
> I think that you have to separate the different thing on each exynos5433-tm2X.dts.
>
> >
> >> - The patch[1] was alread posted. I think you better to rebase this patch on patch[1].
> >> [1] https://patchwork.kernel.org/patch/9491769/
> >> - ("ARM64: dts: TM2: comply to the samsung pinctrl naming convention")
> >
> > Yes, I also thought about this, but I didn't know whether it was
> > already picked by anyone. I didn't want to stop Jaechul that's
> > why I was planning to rebase the other rather than this.
> > But you are right, because some bits of the other patches I know
> > that have been merged. Thank you!
> >
> > Krzysztof, do you mind if I send patch 3 as a reply to this
> > e-mail? The changes should not affect patch 4, anyway.
>
> No, If exynos5433-tm2.dts includes the different value of regulator,
> patch4 might be implemented based on patch3.
OK, I will re-work the patch 3 with the regulators and generate
again patch 4.
Thanks,
Andi
^ permalink raw reply [flat|nested] 33+ messages in thread* [PATCH v2 3/4] arm64: dts: exynos: make tm2 and tm2e independent from each other
@ 2017-01-05 9:33 ` Andi Shyti
0 siblings, 0 replies; 33+ messages in thread
From: Andi Shyti @ 2017-01-05 9:33 UTC (permalink / raw)
To: linux-arm-kernel
Hi Chanwoo,
> >> I add the some comment as following:
> >> - ldo23/25/31/38 have the different value between tm2 and tm2e.
> >
> > Thanks for pointing this out. I planned to do this already in a
> > following patch as for now I think it's out from the scope of this
> > particular patch.
>
> I think it is very simple work. If you want to make the common.dtsi,
> I think that you have to separate the different thing on each exynos5433-tm2X.dts.
>
> >
> >> - The patch[1] was alread posted. I think you better to rebase this patch on patch[1].
> >> [1] https://patchwork.kernel.org/patch/9491769/
> >> - ("ARM64: dts: TM2: comply to the samsung pinctrl naming convention")
> >
> > Yes, I also thought about this, but I didn't know whether it was
> > already picked by anyone. I didn't want to stop Jaechul that's
> > why I was planning to rebase the other rather than this.
> > But you are right, because some bits of the other patches I know
> > that have been merged. Thank you!
> >
> > Krzysztof, do you mind if I send patch 3 as a reply to this
> > e-mail? The changes should not affect patch 4, anyway.
>
> No, If exynos5433-tm2.dts includes the different value of regulator,
> patch4 might be implemented based on patch3.
OK, I will re-work the patch 3 with the regulators and generate
again patch 4.
Thanks,
Andi
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [PATCH v2 3/4] arm64: dts: exynos: make tm2 and tm2e independent from each other
2017-01-05 9:23 ` Andi Shyti
@ 2017-01-05 18:37 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 33+ messages in thread
From: Krzysztof Kozlowski @ 2017-01-05 18:37 UTC (permalink / raw)
To: Andi Shyti
Cc: Chanwoo Choi, Jaechul Lee, Dmitry Torokhov, Rob Herring,
Mark Rutland, Catalin Marinas, Will Deacon, Kukjin Kim,
Krzysztof Kozlowski, Javier Martinez Canillas, beomho.seo,
galaxyra, linux-arm-kernel, linux-input, devicetree, linux-kernel,
linux-samsung-soc
On Thu, Jan 05, 2017 at 06:23:15PM +0900, Andi Shyti wrote:
> Hi Chanwoo,
>
> > I add the some comment as following:
> > - ldo23/25/31/38 have the different value between tm2 and tm2e.
>
> Thanks for pointing this out. I planned to do this already in a
> following patch as for now I think it's out from the scope of this
> particular patch.
>
> > - The patch[1] was alread posted. I think you better to rebase this patch on patch[1].
> > [1] https://patchwork.kernel.org/patch/9491769/
> > - ("ARM64: dts: TM2: comply to the samsung pinctrl naming convention")
>
> Yes, I also thought about this, but I didn't know whether it was
> already picked by anyone. I didn't want to stop Jaechul that's
> why I was planning to rebase the other rather than this.
> But you are right, because some bits of the other patches I know
> that have been merged. Thank you!
>
> Krzysztof, do you mind if I send patch 3 as a reply to this
> e-mail? The changes should not affect patch 4, anyway.
By patch 3 you mean this patch? Yes, you can send another version as a
reply-to but please version it (2.1? etc).
Anyway I need a proper rename detection. I pointed proper command last
time. Is it working?
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 33+ messages in thread* [PATCH v2 3/4] arm64: dts: exynos: make tm2 and tm2e independent from each other
@ 2017-01-05 18:37 ` Krzysztof Kozlowski
0 siblings, 0 replies; 33+ messages in thread
From: Krzysztof Kozlowski @ 2017-01-05 18:37 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Jan 05, 2017 at 06:23:15PM +0900, Andi Shyti wrote:
> Hi Chanwoo,
>
> > I add the some comment as following:
> > - ldo23/25/31/38 have the different value between tm2 and tm2e.
>
> Thanks for pointing this out. I planned to do this already in a
> following patch as for now I think it's out from the scope of this
> particular patch.
>
> > - The patch[1] was alread posted. I think you better to rebase this patch on patch[1].
> > [1] https://patchwork.kernel.org/patch/9491769/
> > - ("ARM64: dts: TM2: comply to the samsung pinctrl naming convention")
>
> Yes, I also thought about this, but I didn't know whether it was
> already picked by anyone. I didn't want to stop Jaechul that's
> why I was planning to rebase the other rather than this.
> But you are right, because some bits of the other patches I know
> that have been merged. Thank you!
>
> Krzysztof, do you mind if I send patch 3 as a reply to this
> e-mail? The changes should not affect patch 4, anyway.
By patch 3 you mean this patch? Yes, you can send another version as a
reply-to but please version it (2.1? etc).
Anyway I need a proper rename detection. I pointed proper command last
time. Is it working?
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [PATCH v2 3/4] arm64: dts: exynos: make tm2 and tm2e independent from each other
2017-01-05 9:13 ` Chanwoo Choi
(?)
@ 2017-01-05 9:45 ` Chanwoo Choi
-1 siblings, 0 replies; 33+ messages in thread
From: Chanwoo Choi @ 2017-01-05 9:45 UTC (permalink / raw)
To: Jaechul Lee, Dmitry Torokhov, Rob Herring, Mark Rutland,
Catalin Marinas, Will Deacon, Kukjin Kim, Krzysztof Kozlowski,
Javier Martinez Canillas
Cc: devicetree, linux-samsung-soc, linux-kernel, Andi Shyti,
beomho.seo, linux-input, galaxyra, linux-arm-kernel
[-- Attachment #1: Type: text/plain, Size: 9382 bytes --]
Hi Andi,
I correct the my previous comment about ldo23 and ldo25
because I check the final schematic document, I worked
with wrong information of ldo23 and ldo25 on the patch[1].
[1] https://lkml.org/lkml/2016/11/3/61
I'll send the fix patch to you right now
after that you better to work for these patches.
On 2017년 01월 05일 18:13, Chanwoo Choi wrote:
> Hi,
>
> I add the some comment as following:
> - ldo23/25/31/38 have the different value between tm2 and tm2e.
> - The patch[1] was alread posted. I think you better to rebase this patch on patch[1].
> [1] https://patchwork.kernel.org/patch/9491769/
> - ("ARM64: dts: TM2: comply to the samsung pinctrl naming convention")
>
> I add detailed comments on below.
>
> On 2017년 01월 05일 17:27, Jaechul Lee wrote:
>> From: Andi Shyti <andi.shyti@samsung.com>
>>
>> Currently tm2e dts includes tm2 but there are some differences
>> between the two boards and tm2 has some properties that tm2e
>> doesn't have.
>>
>> That's why it's important to keep the two dts files independent
>> and put all the commonalities in a tm2-common.dtsi file.
>>
>> Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
>> Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com>
>> ---
>> .../boot/dts/exynos/exynos5433-tm2-common.dtsi | 1116 +++++++++++++++++++
>> arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 1138 +-------------------
>> arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts | 2 +-
>> 3 files changed, 1136 insertions(+), 1120 deletions(-)
>> create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
>> rewrite arch/arm64/boot/dts/exynos/exynos5433-tm2.dts (98%)
>>
>> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
>> new file mode 100644
>> index 0000000..7ad0019
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
>> @@ -0,0 +1,1116 @@
>> +/*
>> + * SAMSUNG Exynos5433 TM2 board device tree source
>> + *
>> + * Copyright (c) 2016 Samsung Electronics Co., Ltd.
>> + *
>> + * Device tree source file for Samsung's TM2 board which is based on
>> + * Samsung Exynos5433 SoC.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +
>> +/dts-v1/;
>> +#include "exynos5433.dtsi"
>> +#include <dt-bindings/clock/samsung,s2mps11.h>
>> +#include <dt-bindings/gpio/gpio.h>
>> +#include <dt-bindings/input/input.h>
>> +#include <dt-bindings/interrupt-controller/irq.h>
>> +
>
> [snip]
>
>> +&hsi2c_0 {
>> + status = "okay";
>> + clock-frequency = <2500000>;
>> +
>> + s2mps13-pmic@66 {
>> + compatible = "samsung,s2mps13-pmic";
>> + interrupt-parent = <&gpa0>;
>> + interrupts = <7 IRQ_TYPE_NONE>;
>> + reg = <0x66>;
>> + samsung,s2mps11-wrstbi-ground;
>> +
>> + s2mps13_osc: clocks {
>> + compatible = "samsung,s2mps13-clk";
>> + #clock-cells = <1>;
>> + clock-output-names = "s2mps13_ap", "s2mps13_cp",
>> + "s2mps13_bt";
>> + };
>> +
>> + regulators {
>> + ldo1_reg: LDO1 {
>> + regulator-name = "VDD_ALIVE_0.9V_AP";
>> + regulator-min-microvolt = <900000>;
>> + regulator-max-microvolt = <900000>;
>> + regulator-always-on;
>> + };
>> +
>> + ldo2_reg: LDO2 {
>> + regulator-name = "VDDQ_MMC2_2.8V_AP";
>> + regulator-min-microvolt = <2800000>;
>> + regulator-max-microvolt = <2800000>;
>> + regulator-always-on;
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + ldo3_reg: LDO3 {
>> + regulator-name = "VDD1_E_1.8V_AP";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + regulator-always-on;
>> + };
>> +
>> + ldo4_reg: LDO4 {
>> + regulator-name = "VDD10_MIF_PLL_1.0V_AP";
>> + regulator-min-microvolt = <1300000>;
>> + regulator-max-microvolt = <1300000>;
>> + regulator-always-on;
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + ldo5_reg: LDO5 {
>> + regulator-name = "VDD10_DPLL_1.0V_AP";
>> + regulator-min-microvolt = <1000000>;
>> + regulator-max-microvolt = <1000000>;
>> + regulator-always-on;
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + ldo6_reg: LDO6 {
>> + regulator-name = "VDD10_MIPI2L_1.0V_AP";
>> + regulator-min-microvolt = <1000000>;
>> + regulator-max-microvolt = <1000000>;
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + ldo7_reg: LDO7 {
>> + regulator-name = "VDD18_MIPI2L_1.8V_AP";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + };
>> +
>> + ldo8_reg: LDO8 {
>> + regulator-name = "VDD18_LLI_1.8V_AP";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + regulator-always-on;
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + ldo9_reg: LDO9 {
>> + regulator-name = "VDD18_ABB_ETC_1.8V_AP";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + regulator-always-on;
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + ldo10_reg: LDO10 {
>> + regulator-name = "VDD33_USB30_3.0V_AP";
>> + regulator-min-microvolt = <3000000>;
>> + regulator-max-microvolt = <3000000>;
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + ldo11_reg: LDO11 {
>> + regulator-name = "VDD_INT_M_1.0V_AP";
>> + regulator-min-microvolt = <1000000>;
>> + regulator-max-microvolt = <1000000>;
>> + regulator-always-on;
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + ldo12_reg: LDO12 {
>> + regulator-name = "VDD_KFC_M_1.1V_AP";
>> + regulator-min-microvolt = <800000>;
>> + regulator-max-microvolt = <1350000>;
>> + regulator-always-on;
>> + };
>> +
>> + ldo13_reg: LDO13 {
>> + regulator-name = "VDD_G3D_M_0.95V_AP";
>> + regulator-min-microvolt = <950000>;
>> + regulator-max-microvolt = <950000>;
>> + regulator-always-on;
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + ldo14_reg: LDO14 {
>> + regulator-name = "VDDQ_M1_LDO_1.2V_AP";
>> + regulator-min-microvolt = <1200000>;
>> + regulator-max-microvolt = <1200000>;
>> + regulator-always-on;
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + ldo15_reg: LDO15 {
>> + regulator-name = "VDDQ_M2_LDO_1.2V_AP";
>> + regulator-min-microvolt = <1200000>;
>> + regulator-max-microvolt = <1200000>;
>> + regulator-always-on;
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + ldo16_reg: LDO16 {
>> + regulator-name = "VDDQ_EFUSE";
>> + regulator-min-microvolt = <1400000>;
>> + regulator-max-microvolt = <3400000>;
>> + regulator-always-on;
>> + };
>> +
>> + ldo17_reg: LDO17 {
>> + regulator-name = "V_TFLASH_2.8V_AP";
>> + regulator-min-microvolt = <2800000>;
>> + regulator-max-microvolt = <2800000>;
>> + };
>> +
>> + ldo18_reg: LDO18 {
>> + regulator-name = "V_CODEC_1.8V_AP";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + };
>> +
>> + ldo19_reg: LDO19 {
>> + regulator-name = "VDDA_1.8V_COMP";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + regulator-always-on;
>> + };
>> +
>> + ldo20_reg: LDO20 {
>> + regulator-name = "VCC_2.8V_AP";
>> + regulator-min-microvolt = <2800000>;
>> + regulator-max-microvolt = <2800000>;
>> + regulator-always-on;
>> + };
>> +
>> + ldo21_reg: LDO21 {
>> + regulator-name = "VT_CAM_1.8V";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + };
>> +
>> + ldo22_reg: LDO22 {
>> + regulator-name = "CAM_IO_1.8V_AP";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + };
>> +
>> + ldo23_reg: LDO23 {
>> + regulator-name = "CAM_SEN_CORE_1.2V_AP";
>> + regulator-min-microvolt = <1050000>;
>> + regulator-max-microvolt = <1200000>;
>
> ldo23_reg has the different value between tm2 and tm2e.
> - tm2 : name - CAM_SEN_CORE_1.2V_AP, max-microvolt :1200000
> - tm2e : name - CAM_SEN_CORE_1.025V_AP, max-microvolt :1050000
To check the final schematic document, ldo23 is used on both tm2 and tm2e without difference.
But, name is CAM_SEN_CORE_1.05V_AP
>
>> + };
>> +
>> + ldo24_reg: LDO24 {
>> + regulator-name = "VT_CAM_1.2V";
>> + regulator-min-microvolt = <1200000>;
>> + regulator-max-microvolt = <1200000>;
>> + };
>> +
>> + ldo25_reg: LDO25 {
>> + regulator-name = "CAM_SEN_A2.8V_AP";
>> + regulator-min-microvolt = <2800000>;
>> + regulator-max-microvolt = <2800000>;
>> + };
>
> ldo25 is only used on TM2 and has the different name between tm2 and tm2e.
> - tm2 : name - CAM_SEN_A2.8V_AP
> - tm2e : name - UNUSED_LDO15
To check the final schematic document, ldo25 is not used on both tm2 and tm2e.
[snip]
--
Best Regards,
Chanwoo Choi
Samsung Electronics
[-- Attachment #2: cw00_choi.vcf --]
[-- Type: text/x-vcard, Size: 6 bytes --]
null
[-- Attachment #3: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 33+ messages in thread* Re: [PATCH v2 3/4] arm64: dts: exynos: make tm2 and tm2e independent from each other
@ 2017-01-05 9:45 ` Chanwoo Choi
0 siblings, 0 replies; 33+ messages in thread
From: Chanwoo Choi @ 2017-01-05 9:45 UTC (permalink / raw)
To: Jaechul Lee, Dmitry Torokhov, Rob Herring, Mark Rutland,
Catalin Marinas, Will Deacon, Kukjin Kim, Krzysztof Kozlowski,
Javier Martinez Canillas
Cc: Andi Shyti, beomho.seo, galaxyra, linux-arm-kernel, linux-input,
devicetree, linux-kernel, linux-samsung-soc
[-- Attachment #1: Type: text/plain, Size: 9382 bytes --]
Hi Andi,
I correct the my previous comment about ldo23 and ldo25
because I check the final schematic document, I worked
with wrong information of ldo23 and ldo25 on the patch[1].
[1] https://lkml.org/lkml/2016/11/3/61
I'll send the fix patch to you right now
after that you better to work for these patches.
On 2017년 01월 05일 18:13, Chanwoo Choi wrote:
> Hi,
>
> I add the some comment as following:
> - ldo23/25/31/38 have the different value between tm2 and tm2e.
> - The patch[1] was alread posted. I think you better to rebase this patch on patch[1].
> [1] https://patchwork.kernel.org/patch/9491769/
> - ("ARM64: dts: TM2: comply to the samsung pinctrl naming convention")
>
> I add detailed comments on below.
>
> On 2017년 01월 05일 17:27, Jaechul Lee wrote:
>> From: Andi Shyti <andi.shyti@samsung.com>
>>
>> Currently tm2e dts includes tm2 but there are some differences
>> between the two boards and tm2 has some properties that tm2e
>> doesn't have.
>>
>> That's why it's important to keep the two dts files independent
>> and put all the commonalities in a tm2-common.dtsi file.
>>
>> Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
>> Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com>
>> ---
>> .../boot/dts/exynos/exynos5433-tm2-common.dtsi | 1116 +++++++++++++++++++
>> arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 1138 +-------------------
>> arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts | 2 +-
>> 3 files changed, 1136 insertions(+), 1120 deletions(-)
>> create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
>> rewrite arch/arm64/boot/dts/exynos/exynos5433-tm2.dts (98%)
>>
>> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
>> new file mode 100644
>> index 0000000..7ad0019
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
>> @@ -0,0 +1,1116 @@
>> +/*
>> + * SAMSUNG Exynos5433 TM2 board device tree source
>> + *
>> + * Copyright (c) 2016 Samsung Electronics Co., Ltd.
>> + *
>> + * Device tree source file for Samsung's TM2 board which is based on
>> + * Samsung Exynos5433 SoC.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +
>> +/dts-v1/;
>> +#include "exynos5433.dtsi"
>> +#include <dt-bindings/clock/samsung,s2mps11.h>
>> +#include <dt-bindings/gpio/gpio.h>
>> +#include <dt-bindings/input/input.h>
>> +#include <dt-bindings/interrupt-controller/irq.h>
>> +
>
> [snip]
>
>> +&hsi2c_0 {
>> + status = "okay";
>> + clock-frequency = <2500000>;
>> +
>> + s2mps13-pmic@66 {
>> + compatible = "samsung,s2mps13-pmic";
>> + interrupt-parent = <&gpa0>;
>> + interrupts = <7 IRQ_TYPE_NONE>;
>> + reg = <0x66>;
>> + samsung,s2mps11-wrstbi-ground;
>> +
>> + s2mps13_osc: clocks {
>> + compatible = "samsung,s2mps13-clk";
>> + #clock-cells = <1>;
>> + clock-output-names = "s2mps13_ap", "s2mps13_cp",
>> + "s2mps13_bt";
>> + };
>> +
>> + regulators {
>> + ldo1_reg: LDO1 {
>> + regulator-name = "VDD_ALIVE_0.9V_AP";
>> + regulator-min-microvolt = <900000>;
>> + regulator-max-microvolt = <900000>;
>> + regulator-always-on;
>> + };
>> +
>> + ldo2_reg: LDO2 {
>> + regulator-name = "VDDQ_MMC2_2.8V_AP";
>> + regulator-min-microvolt = <2800000>;
>> + regulator-max-microvolt = <2800000>;
>> + regulator-always-on;
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + ldo3_reg: LDO3 {
>> + regulator-name = "VDD1_E_1.8V_AP";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + regulator-always-on;
>> + };
>> +
>> + ldo4_reg: LDO4 {
>> + regulator-name = "VDD10_MIF_PLL_1.0V_AP";
>> + regulator-min-microvolt = <1300000>;
>> + regulator-max-microvolt = <1300000>;
>> + regulator-always-on;
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + ldo5_reg: LDO5 {
>> + regulator-name = "VDD10_DPLL_1.0V_AP";
>> + regulator-min-microvolt = <1000000>;
>> + regulator-max-microvolt = <1000000>;
>> + regulator-always-on;
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + ldo6_reg: LDO6 {
>> + regulator-name = "VDD10_MIPI2L_1.0V_AP";
>> + regulator-min-microvolt = <1000000>;
>> + regulator-max-microvolt = <1000000>;
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + ldo7_reg: LDO7 {
>> + regulator-name = "VDD18_MIPI2L_1.8V_AP";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + };
>> +
>> + ldo8_reg: LDO8 {
>> + regulator-name = "VDD18_LLI_1.8V_AP";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + regulator-always-on;
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + ldo9_reg: LDO9 {
>> + regulator-name = "VDD18_ABB_ETC_1.8V_AP";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + regulator-always-on;
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + ldo10_reg: LDO10 {
>> + regulator-name = "VDD33_USB30_3.0V_AP";
>> + regulator-min-microvolt = <3000000>;
>> + regulator-max-microvolt = <3000000>;
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + ldo11_reg: LDO11 {
>> + regulator-name = "VDD_INT_M_1.0V_AP";
>> + regulator-min-microvolt = <1000000>;
>> + regulator-max-microvolt = <1000000>;
>> + regulator-always-on;
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + ldo12_reg: LDO12 {
>> + regulator-name = "VDD_KFC_M_1.1V_AP";
>> + regulator-min-microvolt = <800000>;
>> + regulator-max-microvolt = <1350000>;
>> + regulator-always-on;
>> + };
>> +
>> + ldo13_reg: LDO13 {
>> + regulator-name = "VDD_G3D_M_0.95V_AP";
>> + regulator-min-microvolt = <950000>;
>> + regulator-max-microvolt = <950000>;
>> + regulator-always-on;
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + ldo14_reg: LDO14 {
>> + regulator-name = "VDDQ_M1_LDO_1.2V_AP";
>> + regulator-min-microvolt = <1200000>;
>> + regulator-max-microvolt = <1200000>;
>> + regulator-always-on;
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + ldo15_reg: LDO15 {
>> + regulator-name = "VDDQ_M2_LDO_1.2V_AP";
>> + regulator-min-microvolt = <1200000>;
>> + regulator-max-microvolt = <1200000>;
>> + regulator-always-on;
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + ldo16_reg: LDO16 {
>> + regulator-name = "VDDQ_EFUSE";
>> + regulator-min-microvolt = <1400000>;
>> + regulator-max-microvolt = <3400000>;
>> + regulator-always-on;
>> + };
>> +
>> + ldo17_reg: LDO17 {
>> + regulator-name = "V_TFLASH_2.8V_AP";
>> + regulator-min-microvolt = <2800000>;
>> + regulator-max-microvolt = <2800000>;
>> + };
>> +
>> + ldo18_reg: LDO18 {
>> + regulator-name = "V_CODEC_1.8V_AP";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + };
>> +
>> + ldo19_reg: LDO19 {
>> + regulator-name = "VDDA_1.8V_COMP";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + regulator-always-on;
>> + };
>> +
>> + ldo20_reg: LDO20 {
>> + regulator-name = "VCC_2.8V_AP";
>> + regulator-min-microvolt = <2800000>;
>> + regulator-max-microvolt = <2800000>;
>> + regulator-always-on;
>> + };
>> +
>> + ldo21_reg: LDO21 {
>> + regulator-name = "VT_CAM_1.8V";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + };
>> +
>> + ldo22_reg: LDO22 {
>> + regulator-name = "CAM_IO_1.8V_AP";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + };
>> +
>> + ldo23_reg: LDO23 {
>> + regulator-name = "CAM_SEN_CORE_1.2V_AP";
>> + regulator-min-microvolt = <1050000>;
>> + regulator-max-microvolt = <1200000>;
>
> ldo23_reg has the different value between tm2 and tm2e.
> - tm2 : name - CAM_SEN_CORE_1.2V_AP, max-microvolt :1200000
> - tm2e : name - CAM_SEN_CORE_1.025V_AP, max-microvolt :1050000
To check the final schematic document, ldo23 is used on both tm2 and tm2e without difference.
But, name is CAM_SEN_CORE_1.05V_AP
>
>> + };
>> +
>> + ldo24_reg: LDO24 {
>> + regulator-name = "VT_CAM_1.2V";
>> + regulator-min-microvolt = <1200000>;
>> + regulator-max-microvolt = <1200000>;
>> + };
>> +
>> + ldo25_reg: LDO25 {
>> + regulator-name = "CAM_SEN_A2.8V_AP";
>> + regulator-min-microvolt = <2800000>;
>> + regulator-max-microvolt = <2800000>;
>> + };
>
> ldo25 is only used on TM2 and has the different name between tm2 and tm2e.
> - tm2 : name - CAM_SEN_A2.8V_AP
> - tm2e : name - UNUSED_LDO15
To check the final schematic document, ldo25 is not used on both tm2 and tm2e.
[snip]
--
Best Regards,
Chanwoo Choi
Samsung Electronics
[-- Attachment #2: cw00_choi.vcf --]
[-- Type: text/x-vcard, Size: 6 bytes --]
null
^ permalink raw reply [flat|nested] 33+ messages in thread* [PATCH v2 3/4] arm64: dts: exynos: make tm2 and tm2e independent from each other
@ 2017-01-05 9:45 ` Chanwoo Choi
0 siblings, 0 replies; 33+ messages in thread
From: Chanwoo Choi @ 2017-01-05 9:45 UTC (permalink / raw)
To: linux-arm-kernel
Hi Andi,
I correct the my previous comment about ldo23 and ldo25
because I check the final schematic document, I worked
with wrong information of ldo23 and ldo25 on the patch[1].
[1] https://lkml.org/lkml/2016/11/3/61
I'll send the fix patch to you right now
after that you better to work for these patches.
On 2017? 01? 05? 18:13, Chanwoo Choi wrote:
> Hi,
>
> I add the some comment as following:
> - ldo23/25/31/38 have the different value between tm2 and tm2e.
> - The patch[1] was alread posted. I think you better to rebase this patch on patch[1].
> [1] https://patchwork.kernel.org/patch/9491769/
> - ("ARM64: dts: TM2: comply to the samsung pinctrl naming convention")
>
> I add detailed comments on below.
>
> On 2017? 01? 05? 17:27, Jaechul Lee wrote:
>> From: Andi Shyti <andi.shyti@samsung.com>
>>
>> Currently tm2e dts includes tm2 but there are some differences
>> between the two boards and tm2 has some properties that tm2e
>> doesn't have.
>>
>> That's why it's important to keep the two dts files independent
>> and put all the commonalities in a tm2-common.dtsi file.
>>
>> Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
>> Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com>
>> ---
>> .../boot/dts/exynos/exynos5433-tm2-common.dtsi | 1116 +++++++++++++++++++
>> arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 1138 +-------------------
>> arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts | 2 +-
>> 3 files changed, 1136 insertions(+), 1120 deletions(-)
>> create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
>> rewrite arch/arm64/boot/dts/exynos/exynos5433-tm2.dts (98%)
>>
>> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
>> new file mode 100644
>> index 0000000..7ad0019
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
>> @@ -0,0 +1,1116 @@
>> +/*
>> + * SAMSUNG Exynos5433 TM2 board device tree source
>> + *
>> + * Copyright (c) 2016 Samsung Electronics Co., Ltd.
>> + *
>> + * Device tree source file for Samsung's TM2 board which is based on
>> + * Samsung Exynos5433 SoC.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +
>> +/dts-v1/;
>> +#include "exynos5433.dtsi"
>> +#include <dt-bindings/clock/samsung,s2mps11.h>
>> +#include <dt-bindings/gpio/gpio.h>
>> +#include <dt-bindings/input/input.h>
>> +#include <dt-bindings/interrupt-controller/irq.h>
>> +
>
> [snip]
>
>> +&hsi2c_0 {
>> + status = "okay";
>> + clock-frequency = <2500000>;
>> +
>> + s2mps13-pmic at 66 {
>> + compatible = "samsung,s2mps13-pmic";
>> + interrupt-parent = <&gpa0>;
>> + interrupts = <7 IRQ_TYPE_NONE>;
>> + reg = <0x66>;
>> + samsung,s2mps11-wrstbi-ground;
>> +
>> + s2mps13_osc: clocks {
>> + compatible = "samsung,s2mps13-clk";
>> + #clock-cells = <1>;
>> + clock-output-names = "s2mps13_ap", "s2mps13_cp",
>> + "s2mps13_bt";
>> + };
>> +
>> + regulators {
>> + ldo1_reg: LDO1 {
>> + regulator-name = "VDD_ALIVE_0.9V_AP";
>> + regulator-min-microvolt = <900000>;
>> + regulator-max-microvolt = <900000>;
>> + regulator-always-on;
>> + };
>> +
>> + ldo2_reg: LDO2 {
>> + regulator-name = "VDDQ_MMC2_2.8V_AP";
>> + regulator-min-microvolt = <2800000>;
>> + regulator-max-microvolt = <2800000>;
>> + regulator-always-on;
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + ldo3_reg: LDO3 {
>> + regulator-name = "VDD1_E_1.8V_AP";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + regulator-always-on;
>> + };
>> +
>> + ldo4_reg: LDO4 {
>> + regulator-name = "VDD10_MIF_PLL_1.0V_AP";
>> + regulator-min-microvolt = <1300000>;
>> + regulator-max-microvolt = <1300000>;
>> + regulator-always-on;
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + ldo5_reg: LDO5 {
>> + regulator-name = "VDD10_DPLL_1.0V_AP";
>> + regulator-min-microvolt = <1000000>;
>> + regulator-max-microvolt = <1000000>;
>> + regulator-always-on;
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + ldo6_reg: LDO6 {
>> + regulator-name = "VDD10_MIPI2L_1.0V_AP";
>> + regulator-min-microvolt = <1000000>;
>> + regulator-max-microvolt = <1000000>;
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + ldo7_reg: LDO7 {
>> + regulator-name = "VDD18_MIPI2L_1.8V_AP";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + };
>> +
>> + ldo8_reg: LDO8 {
>> + regulator-name = "VDD18_LLI_1.8V_AP";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + regulator-always-on;
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + ldo9_reg: LDO9 {
>> + regulator-name = "VDD18_ABB_ETC_1.8V_AP";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + regulator-always-on;
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + ldo10_reg: LDO10 {
>> + regulator-name = "VDD33_USB30_3.0V_AP";
>> + regulator-min-microvolt = <3000000>;
>> + regulator-max-microvolt = <3000000>;
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + ldo11_reg: LDO11 {
>> + regulator-name = "VDD_INT_M_1.0V_AP";
>> + regulator-min-microvolt = <1000000>;
>> + regulator-max-microvolt = <1000000>;
>> + regulator-always-on;
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + ldo12_reg: LDO12 {
>> + regulator-name = "VDD_KFC_M_1.1V_AP";
>> + regulator-min-microvolt = <800000>;
>> + regulator-max-microvolt = <1350000>;
>> + regulator-always-on;
>> + };
>> +
>> + ldo13_reg: LDO13 {
>> + regulator-name = "VDD_G3D_M_0.95V_AP";
>> + regulator-min-microvolt = <950000>;
>> + regulator-max-microvolt = <950000>;
>> + regulator-always-on;
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + ldo14_reg: LDO14 {
>> + regulator-name = "VDDQ_M1_LDO_1.2V_AP";
>> + regulator-min-microvolt = <1200000>;
>> + regulator-max-microvolt = <1200000>;
>> + regulator-always-on;
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + ldo15_reg: LDO15 {
>> + regulator-name = "VDDQ_M2_LDO_1.2V_AP";
>> + regulator-min-microvolt = <1200000>;
>> + regulator-max-microvolt = <1200000>;
>> + regulator-always-on;
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + ldo16_reg: LDO16 {
>> + regulator-name = "VDDQ_EFUSE";
>> + regulator-min-microvolt = <1400000>;
>> + regulator-max-microvolt = <3400000>;
>> + regulator-always-on;
>> + };
>> +
>> + ldo17_reg: LDO17 {
>> + regulator-name = "V_TFLASH_2.8V_AP";
>> + regulator-min-microvolt = <2800000>;
>> + regulator-max-microvolt = <2800000>;
>> + };
>> +
>> + ldo18_reg: LDO18 {
>> + regulator-name = "V_CODEC_1.8V_AP";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + };
>> +
>> + ldo19_reg: LDO19 {
>> + regulator-name = "VDDA_1.8V_COMP";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + regulator-always-on;
>> + };
>> +
>> + ldo20_reg: LDO20 {
>> + regulator-name = "VCC_2.8V_AP";
>> + regulator-min-microvolt = <2800000>;
>> + regulator-max-microvolt = <2800000>;
>> + regulator-always-on;
>> + };
>> +
>> + ldo21_reg: LDO21 {
>> + regulator-name = "VT_CAM_1.8V";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + };
>> +
>> + ldo22_reg: LDO22 {
>> + regulator-name = "CAM_IO_1.8V_AP";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + };
>> +
>> + ldo23_reg: LDO23 {
>> + regulator-name = "CAM_SEN_CORE_1.2V_AP";
>> + regulator-min-microvolt = <1050000>;
>> + regulator-max-microvolt = <1200000>;
>
> ldo23_reg has the different value between tm2 and tm2e.
> - tm2 : name - CAM_SEN_CORE_1.2V_AP, max-microvolt :1200000
> - tm2e : name - CAM_SEN_CORE_1.025V_AP, max-microvolt :1050000
To check the final schematic document, ldo23 is used on both tm2 and tm2e without difference.
But, name is CAM_SEN_CORE_1.05V_AP
>
>> + };
>> +
>> + ldo24_reg: LDO24 {
>> + regulator-name = "VT_CAM_1.2V";
>> + regulator-min-microvolt = <1200000>;
>> + regulator-max-microvolt = <1200000>;
>> + };
>> +
>> + ldo25_reg: LDO25 {
>> + regulator-name = "CAM_SEN_A2.8V_AP";
>> + regulator-min-microvolt = <2800000>;
>> + regulator-max-microvolt = <2800000>;
>> + };
>
> ldo25 is only used on TM2 and has the different name between tm2 and tm2e.
> - tm2 : name - CAM_SEN_A2.8V_AP
> - tm2e : name - UNUSED_LDO15
To check the final schematic document, ldo25 is not used on both tm2 and tm2e.
[snip]
--
Best Regards,
Chanwoo Choi
Samsung Electronics
-------------- next part --------------
A non-text attachment was scrubbed...
Name: cw00_choi.vcf
Type: text/x-vcard
Size: 6 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170105/a8f8abfb/attachment-0001.vcf>
^ permalink raw reply [flat|nested] 33+ messages in thread