[PATCH v5 0/5] Configure imx8mp dsp node for rproc usage

[PATCH v5 0/5] Configure imx8mp dsp node for rproc usage

[Daniel Baluta]

DSP found in i.MX8MP SOC can be used by multiple frameworks in order to
enable various applications:
        - rproc/rpmsg framework, used to load for example Zephyr samples
        - Sound Open Firmware, used to enable various audio processing
          pipelines.

Current dsp node was configured with SOF in mind but it doesn't work
well with imx8mp-evk dts. SOF controls audio IPs from firmware side
while imx8mp-evk.dts preffers to control audio IPs from Linux side.

So, configure 'dsp' node to be used with rproc scenario and later will
add a separate dts or an overlay to configure the node for SOF.

This patch series configures and enables dsp node to be used with rproc.

Changes since v4:
(https://lore.kernel.org/linux-arm-kernel/Z6zGLn3B6SVXhTV1@lizhi-Precision-Tower-5810/T/)
	- after comments received on v4, we implemented the run/stall
	  bits using reset controller API (changes merged ->
https://patchwork.kernel.org/project/linux-arm-kernel/cover/20250311085812.1296243-1-daniel.baluta@nxp.com/)
        - drop patches related to DSP run/stall/reset via syscon
	- picked up patch related to using run_stall via reset
	  controller API.

Daniel Baluta (5):
  arm64: dts: imx8mp: Use resets property
  arm64: dts: imx8mp: Add mu2 root clock
  arm64: dts: imx8mp: Configure dsp node for rproc usage
  arm64: dts: imx8mp: Add DSP clocks
  arm64: dts: Add dsp rproc related mem regions

 arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 10 +++++++++
 arch/arm64/boot/dts/freescale/imx8mp.dtsi    | 22 +++++++++++++-------
 2 files changed, 25 insertions(+), 7 deletions(-)

-- 
2.43.0

[PATCH v5 1/5] arm64: dts: imx8mp: Use resets property

[Daniel Baluta]

Add resets property to dsp node in order to be able to control the dsp
run/stall bit from audio block control.

Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mp.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index ce6793b2d57e..3b725fe442d0 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -6,6 +6,7 @@
 #include <dt-bindings/clock/imx8mp-clock.h>
 #include <dt-bindings/power/imx8mp-power.h>
 #include <dt-bindings/reset/imx8mp-reset.h>
+#include <dt-bindings/reset/imx8mp-reset-audiomix.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interconnect/fsl,imx8mp.h>
@@ -2422,6 +2423,8 @@ dsp: dsp@3b6e8000 {
 			mboxes = <&mu2 2 0>, <&mu2 2 1>,
 				<&mu2 3 0>, <&mu2 3 1>;
 			memory-region = <&dsp_reserved>;
+			resets = <&audio_blk_ctrl IMX8MP_AUDIOMIX_DSP_RUNSTALL>;
+			reset-names = "runstall";
 			status = "disabled";
 		};
 	};
-- 
2.43.0

[PATCH v5 2/5] arm64: dts: imx8mp: Add mu2 root clock

[Daniel Baluta]

Enable MU2 node and add mu2 root clock.
MU2 is used to communicate with DSP core.

Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mp.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index 3b725fe442d0..5b443fbeded8 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -1253,7 +1253,7 @@ mu2: mailbox@30e60000 {
 				reg = <0x30e60000 0x10000>;
 				interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
 				#mbox-cells = <2>;
-				status = "disabled";
+				clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_MU2_ROOT>;
 			};
 
 			i2c5: i2c@30ad0000 {
-- 
2.43.0

Re: [PATCH v5 2/5] arm64: dts: imx8mp: Add mu2 root clock

[Alexander Stein]

Am Montag, 17. März 2025, 14:33:03 CET schrieb Daniel Baluta:
> Enable MU2 node and add mu2 root clock.
> MU2 is used to communicate with DSP core.
> 
> Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
> Reviewed-by: Peng Fan <peng.fan@nxp.com>
> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
> ---
>  arch/arm64/boot/dts/freescale/imx8mp.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> index 3b725fe442d0..5b443fbeded8 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> @@ -1253,7 +1253,7 @@ mu2: mailbox@30e60000 {
>  				reg = <0x30e60000 0x10000>;
>  				interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
>  				#mbox-cells = <2>;
> -				status = "disabled";

There is no need to enable MU2 if the DSP is disabled by default, no?

Best regards
Alexander

> +				clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_MU2_ROOT>;
>  			};
>  
>  			i2c5: i2c@30ad0000 {
> 


-- 
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/

Re: [PATCH v5 2/5] arm64: dts: imx8mp: Add mu2 root clock

[Daniel Baluta]

On Mon, Mar 17, 2025 at 5:30 PM Alexander Stein
<alexander.stein@ew.tq-group.com> wrote:
>
> Am Montag, 17. März 2025, 14:33:03 CET schrieb Daniel Baluta:
> > Enable MU2 node and add mu2 root clock.
> > MU2 is used to communicate with DSP core.
> >
> > Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
> > Reviewed-by: Peng Fan <peng.fan@nxp.com>
> > Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
> > ---
> >  arch/arm64/boot/dts/freescale/imx8mp.dtsi | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > index 3b725fe442d0..5b443fbeded8 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > @@ -1253,7 +1253,7 @@ mu2: mailbox@30e60000 {
> >                               reg = <0x30e60000 0x10000>;
> >                               interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
> >                               #mbox-cells = <2>;
> > -                             status = "disabled";
>
> There is no need to enable MU2 if the DSP is disabled by default, no?

True, I can enable it only when needed. Will fix in next version.

[PATCH v5 3/5] arm64: dts: imx8mp: Configure dsp node for rproc usage

[Daniel Baluta]

DSP can be used with various frameworks (e.g audio firmware, rproc).
Currently 'dsp' configuration is intended for audio firmware but it
doesn't work well with board level DTs (e.g imx8mp-evk) because
board level DT enables audio related IPs (e.g SAI) while audio firmware
needs this IPs disabled (because firmware will configure them).

So, configure 'dsp' node to be used with rproc. This way users will be
able to use board DT to use the DSP as long as they don't clash with
Audio IP configurations.

More comples usage of 'dsp' node (e.g by audio firmware) will need to
create a separate dts file (or an overlay).

This change follows the approach taken for other i.MX8 boards
in commit 391a319c81f6d7 ("arm64: dts: imx8-ss-audio: configure dsp node
for rproc usage")

Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mp.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index 5b443fbeded8..cbe8dfa3b3bc 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -281,7 +281,7 @@ reserved-memory {
 		ranges;
 
 		dsp_reserved: dsp@92400000 {
-			reg = <0 0x92400000 0 0x2000000>;
+			reg = <0 0x92400000 0 0x1000000>;
 			no-map;
 			status = "disabled";
 		};
@@ -2416,12 +2416,12 @@ usb_dwc3_1: usb@38200000 {
 		};
 
 		dsp: dsp@3b6e8000 {
-			compatible = "fsl,imx8mp-dsp";
+			compatible = "fsl,imx8mp-hifi4";
 			reg = <0x3b6e8000 0x88000>;
-			mbox-names = "txdb0", "txdb1",
-				"rxdb0", "rxdb1";
-			mboxes = <&mu2 2 0>, <&mu2 2 1>,
-				<&mu2 3 0>, <&mu2 3 1>;
+			power-domains = <&pgc_audio>;
+			mbox-names = "tx", "rx", "rxdb";
+			mboxes = <&mu2 0 0>, <&mu2 1 0>, <&mu2 3 0>;
+			firmware-name = "imx/dsp/hifi4.bin";
 			memory-region = <&dsp_reserved>;
 			resets = <&audio_blk_ctrl IMX8MP_AUDIOMIX_DSP_RUNSTALL>;
 			reset-names = "runstall";
-- 
2.43.0

[PATCH v5 4/5] arm64: dts: imx8mp: Add DSP clocks

[Daniel Baluta]

DSP core needs ocram, core and debug clocks.

Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mp.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index cbe8dfa3b3bc..5a43c10d07f6 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -2418,6 +2418,11 @@ usb_dwc3_1: usb@38200000 {
 		dsp: dsp@3b6e8000 {
 			compatible = "fsl,imx8mp-hifi4";
 			reg = <0x3b6e8000 0x88000>;
+			clocks = <&audio_blk_ctrl  IMX8MP_CLK_AUDIOMIX_DSP_ROOT>,
+				<&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_OCRAMA_IPG>,
+				<&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_DSP_ROOT>,
+				<&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_DSPDBG_ROOT>;
+			clock-names = "ipg", "ocram", "core", "debug";
 			power-domains = <&pgc_audio>;
 			mbox-names = "tx", "rx", "rxdb";
 			mboxes = <&mu2 0 0>, <&mu2 1 0>, <&mu2 3 0>;
-- 
2.43.0

[PATCH v5 5/5] arm64: dts: Add dsp rproc related mem regions

[Daniel Baluta]

With imx8mp-evk board we are now configuring 'dsp' node for rproc usage,
so add rproc specific memory regions.

Also, enable dsp node because it is ready to be used.

Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index c26954e5a605..cd7ab74de2b3 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -309,6 +309,16 @@ &aud2htx {
 	status = "okay";
 };
 
+&dsp_reserved {
+	status = "okay";
+};
+
+&dsp {
+	memory-region = <&dsp_vdev0buffer>, <&dsp_vdev0vring0>,
+			<&dsp_vdev0vring1>, <&dsp_reserved>;
+	status = "okay";
+};
+
 &eqos {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_eqos>;
-- 
2.43.0

Re: [PATCH v5 0/5] Configure imx8mp dsp node for rproc usage

[Rob Herring (Arm)]

On Mon, 17 Mar 2025 15:33:01 +0200, Daniel Baluta wrote:
> DSP found in i.MX8MP SOC can be used by multiple frameworks in order to
> enable various applications:
>         - rproc/rpmsg framework, used to load for example Zephyr samples
>         - Sound Open Firmware, used to enable various audio processing
>           pipelines.
> 
> Current dsp node was configured with SOF in mind but it doesn't work
> well with imx8mp-evk dts. SOF controls audio IPs from firmware side
> while imx8mp-evk.dts preffers to control audio IPs from Linux side.
> 
> So, configure 'dsp' node to be used with rproc scenario and later will
> add a separate dts or an overlay to configure the node for SOF.
> 
> This patch series configures and enables dsp node to be used with rproc.
> 
> Changes since v4:
> (https://lore.kernel.org/linux-arm-kernel/Z6zGLn3B6SVXhTV1@lizhi-Precision-Tower-5810/T/)
> 	- after comments received on v4, we implemented the run/stall
> 	  bits using reset controller API (changes merged ->
> https://patchwork.kernel.org/project/linux-arm-kernel/cover/20250311085812.1296243-1-daniel.baluta@nxp.com/)
>         - drop patches related to DSP run/stall/reset via syscon
> 	- picked up patch related to using run_stall via reset
> 	  controller API.
> 
> Daniel Baluta (5):
>   arm64: dts: imx8mp: Use resets property
>   arm64: dts: imx8mp: Add mu2 root clock
>   arm64: dts: imx8mp: Configure dsp node for rproc usage
>   arm64: dts: imx8mp: Add DSP clocks
>   arm64: dts: Add dsp rproc related mem regions
> 
>  arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 10 +++++++++
>  arch/arm64/boot/dts/freescale/imx8mp.dtsi    | 22 +++++++++++++-------
>  2 files changed, 25 insertions(+), 7 deletions(-)
> 
> --
> 2.43.0
> 
> 
> 


My bot found new DTB warnings on the .dts files added or changed in this
series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.

If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:

  pip3 install dtschema --upgrade


New warnings running 'make CHECK_DTBS=y for arch/arm64/boot/dts/freescale/' for 20250317133306.2003909-1-daniel.baluta@nxp.com:

arch/arm64/boot/dts/freescale/imx8mp-aristainetos3-proton2s.dtb: dsp@3b6e8000: memory-region: [[142]] is too short
	from schema $id: http://devicetree.org/schemas/dsp/fsl,dsp.yaml#
arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dtb: dsp@3b6e8000: memory-region: [[105]] is too short
	from schema $id: http://devicetree.org/schemas/dsp/fsl,dsp.yaml#
arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dtb: dsp@3b6e8000: memory-region: [[156]] is too short
	from schema $id: http://devicetree.org/schemas/dsp/fsl,dsp.yaml#
arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx-2x.dtb: dsp@3b6e8000: memory-region: [[127]] is too short
	from schema $id: http://devicetree.org/schemas/dsp/fsl,dsp.yaml#
arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-dahlia.dtb: dsp@3b6e8000: memory-region: [[164]] is too short
	from schema $id: http://devicetree.org/schemas/dsp/fsl,dsp.yaml#
arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp-edimm2.2.dtb: dsp@3b6e8000: memory-region: [[102]] is too short
	from schema $id: http://devicetree.org/schemas/dsp/fsl,dsp.yaml#
arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx-2x.dtb: dsp@3b6e8000: memory-region: [[129]] is too short
	from schema $id: http://devicetree.org/schemas/dsp/fsl,dsp.yaml#
arch/arm64/boot/dts/freescale/imx8mp-skov-revb-lt6.dtb: dsp@3b6e8000: memory-region: [[132]] is too short
	from schema $id: http://devicetree.org/schemas/dsp/fsl,dsp.yaml#
arch/arm64/boot/dts/freescale/imx8mp-debix-som-a-bmb-08.dtb: dsp@3b6e8000: memory-region: [[118]] is too short
	from schema $id: http://devicetree.org/schemas/dsp/fsl,dsp.yaml#
arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-dev.dtb: dsp@3b6e8000: memory-region: [[165]] is too short
	from schema $id: http://devicetree.org/schemas/dsp/fsl,dsp.yaml#
arch/arm64/boot/dts/freescale/imx8mp-nitrogen-smarc-universal-board.dtb: dsp@3b6e8000: memory-region: [[105]] is too short
	from schema $id: http://devicetree.org/schemas/dsp/fsl,dsp.yaml#
arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dtb: dsp@3b6e8000: memory-region: [[140]] is too short
	from schema $id: http://devicetree.org/schemas/dsp/fsl,dsp.yaml#
arch/arm64/boot/dts/freescale/imx8mp-aristainetos3-adpismarc.dtb: dsp@3b6e8000: memory-region: [[142]] is too short
	from schema $id: http://devicetree.org/schemas/dsp/fsl,dsp.yaml#
arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-ivy.dtb: dsp@3b6e8000: memory-region: [[162]] is too short
	from schema $id: http://devicetree.org/schemas/dsp/fsl,dsp.yaml#
arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx-2x.dtb: dsp@3b6e8000: memory-region: [[120]] is too short
	from schema $id: http://devicetree.org/schemas/dsp/fsl,dsp.yaml#
arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-yavia.dtb: dsp@3b6e8000: memory-region: [[163]] is too short
	from schema $id: http://devicetree.org/schemas/dsp/fsl,dsp.yaml#
arch/arm64/boot/dts/freescale/imx8mp-kontron-smarc-eval-carrier.dtb: dsp@3b6e8000: memory-region: [[155]] is too short
	from schema $id: http://devicetree.org/schemas/dsp/fsl,dsp.yaml#
arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-mallow.dtb: dsp@3b6e8000: memory-region: [[164]] is too short
	from schema $id: http://devicetree.org/schemas/dsp/fsl,dsp.yaml#
arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dtb: dsp@3b6e8000: memory-region: [[119]] is too short
	from schema $id: http://devicetree.org/schemas/dsp/fsl,dsp.yaml#
arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-yavia.dtb: dsp@3b6e8000: memory-region: [[158]] is too short
	from schema $id: http://devicetree.org/schemas/dsp/fsl,dsp.yaml#
arch/arm64/boot/dts/freescale/imx8mp-skov-revb-mi1010ait-1cp1.dtb: dsp@3b6e8000: memory-region: [[131]] is too short
	from schema $id: http://devicetree.org/schemas/dsp/fsl,dsp.yaml#
arch/arm64/boot/dts/freescale/imx8mp-navqp.dtb: dsp@3b6e8000: memory-region: [[111]] is too short
	from schema $id: http://devicetree.org/schemas/dsp/fsl,dsp.yaml#
arch/arm64/boot/dts/freescale/imx8mp-skov-revb-hdmi.dtb: dsp@3b6e8000: memory-region: [[134]] is too short
	from schema $id: http://devicetree.org/schemas/dsp/fsl,dsp.yaml#
arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dtb: dsp@3b6e8000: memory-region: [[130]] is too short
	from schema $id: http://devicetree.org/schemas/dsp/fsl,dsp.yaml#
arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dtb: dsp@3b6e8000: memory-region: [[152]] is too short
	from schema $id: http://devicetree.org/schemas/dsp/fsl,dsp.yaml#
arch/arm64/boot/dts/freescale/imx8mp-skov-revc-bd500.dtb: dsp@3b6e8000: memory-region: [[130]] is too short
	from schema $id: http://devicetree.org/schemas/dsp/fsl,dsp.yaml#
arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dtb: dsp@3b6e8000: memory-region: [[148]] is too short
	from schema $id: http://devicetree.org/schemas/dsp/fsl,dsp.yaml#
arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dtb: dsp@3b6e8000: memory-region: [[136]] is too short
	from schema $id: http://devicetree.org/schemas/dsp/fsl,dsp.yaml#
arch/arm64/boot/dts/freescale/imx8mp-aristainetos3-helios.dtb: dsp@3b6e8000: memory-region: [[142]] is too short
	from schema $id: http://devicetree.org/schemas/dsp/fsl,dsp.yaml#
arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-dahlia.dtb: dsp@3b6e8000: memory-region: [[169]] is too short
	from schema $id: http://devicetree.org/schemas/dsp/fsl,dsp.yaml#
arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314.dtb: dsp@3b6e8000: memory-region: [[156]] is too short
	from schema $id: http://devicetree.org/schemas/dsp/fsl,dsp.yaml#
arch/arm64/boot/dts/freescale/imx8mp-dhcom-drc02.dtb: dsp@3b6e8000: memory-region: [[160]] is too short
	from schema $id: http://devicetree.org/schemas/dsp/fsl,dsp.yaml#
arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-ivy.dtb: dsp@3b6e8000: memory-region: [[157]] is too short
	from schema $id: http://devicetree.org/schemas/dsp/fsl,dsp.yaml#
arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-mallow.dtb: dsp@3b6e8000: memory-region: [[159]] is too short
	from schema $id: http://devicetree.org/schemas/dsp/fsl,dsp.yaml#
arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dtb: dsp@3b6e8000: memory-region: [[153]] is too short
	from schema $id: http://devicetree.org/schemas/dsp/fsl,dsp.yaml#
arch/arm64/boot/dts/freescale/imx8mp-kontron-bl-osm-s.dtb: dsp@3b6e8000: memory-region: [[150]] is too short
	from schema $id: http://devicetree.org/schemas/dsp/fsl,dsp.yaml#
arch/arm64/boot/dts/freescale/imx8mp-venice-gw82xx-2x.dtb: dsp@3b6e8000: memory-region: [[132]] is too short
	from schema $id: http://devicetree.org/schemas/dsp/fsl,dsp.yaml#
arch/arm64/boot/dts/freescale/imx8mp-venice-gw75xx-2x.dtb: dsp@3b6e8000: memory-region: [[123]] is too short
	from schema $id: http://devicetree.org/schemas/dsp/fsl,dsp.yaml#
arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dtb: dsp@3b6e8000: memory-region: [[144]] is too short
	from schema $id: http://devicetree.org/schemas/dsp/fsl,dsp.yaml#
arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-dev.dtb: dsp@3b6e8000: memory-region: [[160]] is too short
	from schema $id: http://devicetree.org/schemas/dsp/fsl,dsp.yaml#
arch/arm64/boot/dts/freescale/imx8mp-skov-revc-tian-g07017.dtb: dsp@3b6e8000: memory-region: [[131]] is too short
	from schema $id: http://devicetree.org/schemas/dsp/fsl,dsp.yaml#
arch/arm64/boot/dts/freescale/imx8mp-iota2-lumpy.dtb: dsp@3b6e8000: memory-region: [[107]] is too short
	from schema $id: http://devicetree.org/schemas/dsp/fsl,dsp.yaml#
arch/arm64/boot/dts/freescale/imx8mp-dhcom-picoitx.dtb: dsp@3b6e8000: memory-region: [[158]] is too short
	from schema $id: http://devicetree.org/schemas/dsp/fsl,dsp.yaml#
arch/arm64/boot/dts/freescale/imx8mp-skov-basic.dtb: dsp@3b6e8000: memory-region: [[129]] is too short
	from schema $id: http://devicetree.org/schemas/dsp/fsl,dsp.yaml#