From: Kishon Vijay Abraham I <kishon@ti.com>
To: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org
Subject: Re: [PATCH v2 4/4] phy: qcom-ufs: Suppress extraneous logging
Date: Thu, 26 Jan 2017 20:56:49 +0530 [thread overview]
Message-ID: <588A1539.8020901@ti.com> (raw)
In-Reply-To: <20170122211749.22803-4-bjorn.andersson@linaro.org>
On Monday 23 January 2017 02:47 AM, Bjorn Andersson wrote:
> The error paths of the common qcom-ufs functions for registering the
> phy, acquiring clocks and acquiring regulators all print specific error
> messages before returning an error, so there is no value in printing yet
> another - more generic - message when this occur.
>
> Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org>
> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
merged the series, thanks.
-Kishon
> ---
>
> Changes since v1:
> - Picked up reviewed-bys from Vivek and Subhash
>
> drivers/phy/phy-qcom-ufs-qmp-14nm.c | 15 +++------------
> drivers/phy/phy-qcom-ufs-qmp-20nm.c | 12 ++----------
> 2 files changed, 5 insertions(+), 22 deletions(-)
>
> diff --git a/drivers/phy/phy-qcom-ufs-qmp-14nm.c b/drivers/phy/phy-qcom-ufs-qmp-14nm.c
> index c71c84734916..12a1b498dc4b 100644
> --- a/drivers/phy/phy-qcom-ufs-qmp-14nm.c
> +++ b/drivers/phy/phy-qcom-ufs-qmp-14nm.c
> @@ -132,27 +132,18 @@ static int ufs_qcom_phy_qmp_14nm_probe(struct platform_device *pdev)
> &ufs_qcom_phy_qmp_14nm_phy_ops, &phy_14nm_ops);
>
> if (!generic_phy) {
> - dev_err(dev, "%s: ufs_qcom_phy_generic_probe() failed\n",
> - __func__);
> err = -EIO;
> goto out;
> }
>
> err = ufs_qcom_phy_init_clks(phy_common);
> - if (err) {
> - dev_err(phy_common->dev,
> - "%s: ufs_qcom_phy_init_clks() failed %d\n",
> - __func__, err);
> + if (err)
> goto out;
> - }
>
> err = ufs_qcom_phy_init_vregulators(phy_common);
> - if (err) {
> - dev_err(phy_common->dev,
> - "%s: ufs_qcom_phy_init_vregulators() failed %d\n",
> - __func__, err);
> + if (err)
> goto out;
> - }
> +
> phy_common->vdda_phy.max_uV = UFS_PHY_VDDA_PHY_UV;
> phy_common->vdda_phy.min_uV = UFS_PHY_VDDA_PHY_UV;
>
> diff --git a/drivers/phy/phy-qcom-ufs-qmp-20nm.c b/drivers/phy/phy-qcom-ufs-qmp-20nm.c
> index 1a26a64e06d3..4f68acb58b73 100644
> --- a/drivers/phy/phy-qcom-ufs-qmp-20nm.c
> +++ b/drivers/phy/phy-qcom-ufs-qmp-20nm.c
> @@ -190,25 +190,17 @@ static int ufs_qcom_phy_qmp_20nm_probe(struct platform_device *pdev)
> &ufs_qcom_phy_qmp_20nm_phy_ops, &phy_20nm_ops);
>
> if (!generic_phy) {
> - dev_err(dev, "%s: ufs_qcom_phy_generic_probe() failed\n",
> - __func__);
> err = -EIO;
> goto out;
> }
>
> err = ufs_qcom_phy_init_clks(phy_common);
> - if (err) {
> - dev_err(phy_common->dev, "%s: ufs_qcom_phy_init_clks() failed %d\n",
> - __func__, err);
> + if (err)
> goto out;
> - }
>
> err = ufs_qcom_phy_init_vregulators(phy_common);
> - if (err) {
> - dev_err(phy_common->dev, "%s: ufs_qcom_phy_init_vregulators() failed %d\n",
> - __func__, err);
> + if (err)
> goto out;
> - }
>
> ufs_qcom_phy_qmp_20nm_advertise_quirks(phy_common);
>
>
WARNING: multiple messages have this Message-ID (diff)
From: Kishon Vijay Abraham I <kishon@ti.com>
To: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: <linux-kernel@vger.kernel.org>, <linux-arm-msm@vger.kernel.org>
Subject: Re: [PATCH v2 4/4] phy: qcom-ufs: Suppress extraneous logging
Date: Thu, 26 Jan 2017 20:56:49 +0530 [thread overview]
Message-ID: <588A1539.8020901@ti.com> (raw)
In-Reply-To: <20170122211749.22803-4-bjorn.andersson@linaro.org>
On Monday 23 January 2017 02:47 AM, Bjorn Andersson wrote:
> The error paths of the common qcom-ufs functions for registering the
> phy, acquiring clocks and acquiring regulators all print specific error
> messages before returning an error, so there is no value in printing yet
> another - more generic - message when this occur.
>
> Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org>
> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
merged the series, thanks.
-Kishon
> ---
>
> Changes since v1:
> - Picked up reviewed-bys from Vivek and Subhash
>
> drivers/phy/phy-qcom-ufs-qmp-14nm.c | 15 +++------------
> drivers/phy/phy-qcom-ufs-qmp-20nm.c | 12 ++----------
> 2 files changed, 5 insertions(+), 22 deletions(-)
>
> diff --git a/drivers/phy/phy-qcom-ufs-qmp-14nm.c b/drivers/phy/phy-qcom-ufs-qmp-14nm.c
> index c71c84734916..12a1b498dc4b 100644
> --- a/drivers/phy/phy-qcom-ufs-qmp-14nm.c
> +++ b/drivers/phy/phy-qcom-ufs-qmp-14nm.c
> @@ -132,27 +132,18 @@ static int ufs_qcom_phy_qmp_14nm_probe(struct platform_device *pdev)
> &ufs_qcom_phy_qmp_14nm_phy_ops, &phy_14nm_ops);
>
> if (!generic_phy) {
> - dev_err(dev, "%s: ufs_qcom_phy_generic_probe() failed\n",
> - __func__);
> err = -EIO;
> goto out;
> }
>
> err = ufs_qcom_phy_init_clks(phy_common);
> - if (err) {
> - dev_err(phy_common->dev,
> - "%s: ufs_qcom_phy_init_clks() failed %d\n",
> - __func__, err);
> + if (err)
> goto out;
> - }
>
> err = ufs_qcom_phy_init_vregulators(phy_common);
> - if (err) {
> - dev_err(phy_common->dev,
> - "%s: ufs_qcom_phy_init_vregulators() failed %d\n",
> - __func__, err);
> + if (err)
> goto out;
> - }
> +
> phy_common->vdda_phy.max_uV = UFS_PHY_VDDA_PHY_UV;
> phy_common->vdda_phy.min_uV = UFS_PHY_VDDA_PHY_UV;
>
> diff --git a/drivers/phy/phy-qcom-ufs-qmp-20nm.c b/drivers/phy/phy-qcom-ufs-qmp-20nm.c
> index 1a26a64e06d3..4f68acb58b73 100644
> --- a/drivers/phy/phy-qcom-ufs-qmp-20nm.c
> +++ b/drivers/phy/phy-qcom-ufs-qmp-20nm.c
> @@ -190,25 +190,17 @@ static int ufs_qcom_phy_qmp_20nm_probe(struct platform_device *pdev)
> &ufs_qcom_phy_qmp_20nm_phy_ops, &phy_20nm_ops);
>
> if (!generic_phy) {
> - dev_err(dev, "%s: ufs_qcom_phy_generic_probe() failed\n",
> - __func__);
> err = -EIO;
> goto out;
> }
>
> err = ufs_qcom_phy_init_clks(phy_common);
> - if (err) {
> - dev_err(phy_common->dev, "%s: ufs_qcom_phy_init_clks() failed %d\n",
> - __func__, err);
> + if (err)
> goto out;
> - }
>
> err = ufs_qcom_phy_init_vregulators(phy_common);
> - if (err) {
> - dev_err(phy_common->dev, "%s: ufs_qcom_phy_init_vregulators() failed %d\n",
> - __func__, err);
> + if (err)
> goto out;
> - }
>
> ufs_qcom_phy_qmp_20nm_advertise_quirks(phy_common);
>
>
next prev parent reply other threads:[~2017-01-26 15:26 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-22 21:17 [PATCH v2 1/4] phy: qcom-ufs: Don't kfree devres resource Bjorn Andersson
2017-01-22 21:17 ` [PATCH v2 2/4] phy: qcom-ufs: Correct usage of regulator_get() Bjorn Andersson
2017-01-22 21:17 ` [PATCH v2 3/4] phy: qcom-ufs: Remove -always-on property Bjorn Andersson
2017-01-22 21:17 ` [PATCH v2 4/4] phy: qcom-ufs: Suppress extraneous logging Bjorn Andersson
2017-01-26 15:26 ` Kishon Vijay Abraham I [this message]
2017-01-26 15:26 ` Kishon Vijay Abraham I
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=588A1539.8020901@ti.com \
--to=kishon@ti.com \
--cc=bjorn.andersson@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.