From: Chanwoo Choi <cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
To: Enric Balletbo i Serra
<enric.balletbo-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>,
MyungJoo Ham
<myungjoo.ham-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>,
Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
Cc: groeck-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Benson Leung <bleung-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
Subject: Re: [PATCH 1/3] extcon: usbc-cros-ec: add support to notify USB type cables.
Date: Thu, 07 Dec 2017 11:12:56 +0900 [thread overview]
Message-ID: <5A28A3A8.4020302@samsung.com> (raw)
In-Reply-To: <20171206111008.3079-1-enric.balletbo-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>
Hi Enric,
On 2017년 12월 06일 20:10, Enric Balletbo i Serra wrote:
> From: Benson Leung <bleung-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
>
> Extend the driver to notify host and device type cables and the presence
> of power.
>
> Signed-off-by: Benson Leung <bleung-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>
> ---
> drivers/extcon/extcon-usbc-cros-ec.c | 142 ++++++++++++++++++++++++++++++++++-
> include/linux/mfd/cros_ec_commands.h | 17 +++++
> 2 files changed, 155 insertions(+), 4 deletions(-)
Looks good to me.
After you uses the BIT() macro as the Lee's comment on v2,
I'll merge this patch.
Reviewed-by: Chanwoo Choi <cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
>
> diff --git a/drivers/extcon/extcon-usbc-cros-ec.c b/drivers/extcon/extcon-usbc-cros-ec.c
> index 6187f73..6721ab0 100644
> --- a/drivers/extcon/extcon-usbc-cros-ec.c
> +++ b/drivers/extcon/extcon-usbc-cros-ec.c
> @@ -34,16 +34,26 @@ struct cros_ec_extcon_info {
>
> struct notifier_block notifier;
>
> + unsigned int dr; /* data role */
> + bool pr; /* power role (true if VBUS enabled) */
> bool dp; /* DisplayPort enabled */
> bool mux; /* SuperSpeed (usb3) enabled */
> unsigned int power_type;
> };
>
> static const unsigned int usb_type_c_cable[] = {
> + EXTCON_USB,
> + EXTCON_USB_HOST,
> EXTCON_DISP_DP,
> EXTCON_NONE,
> };
>
> +enum usb_data_roles {
> + DR_NONE,
> + DR_HOST,
> + DR_DEVICE,
> +};
> +
> /**
> * cros_ec_pd_command() - Send a command to the EC.
> * @info: pointer to struct cros_ec_extcon_info
> @@ -150,6 +160,7 @@ static int cros_ec_usb_get_role(struct cros_ec_extcon_info *info,
> pd_control.port = info->port_id;
> pd_control.role = USB_PD_CTRL_ROLE_NO_CHANGE;
> pd_control.mux = USB_PD_CTRL_MUX_NO_CHANGE;
> + pd_control.swap = USB_PD_CTRL_SWAP_NONE;
> ret = cros_ec_pd_command(info, EC_CMD_USB_PD_CONTROL, 1,
> &pd_control, sizeof(pd_control),
> &resp, sizeof(resp));
> @@ -183,11 +194,72 @@ static int cros_ec_pd_get_num_ports(struct cros_ec_extcon_info *info)
> return resp.num_ports;
> }
>
> +static const char *cros_ec_usb_role_string(unsigned int role)
> +{
> + return role == DR_NONE ? "DISCONNECTED" :
> + (role == DR_HOST ? "DFP" : "UFP");
> +}
> +
> +static const char *cros_ec_usb_power_type_string(unsigned int type)
> +{
> + switch (type) {
> + case USB_CHG_TYPE_NONE:
> + return "USB_CHG_TYPE_NONE";
> + case USB_CHG_TYPE_PD:
> + return "USB_CHG_TYPE_PD";
> + case USB_CHG_TYPE_PROPRIETARY:
> + return "USB_CHG_TYPE_PROPRIETARY";
> + case USB_CHG_TYPE_C:
> + return "USB_CHG_TYPE_C";
> + case USB_CHG_TYPE_BC12_DCP:
> + return "USB_CHG_TYPE_BC12_DCP";
> + case USB_CHG_TYPE_BC12_CDP:
> + return "USB_CHG_TYPE_BC12_CDP";
> + case USB_CHG_TYPE_BC12_SDP:
> + return "USB_CHG_TYPE_BC12_SDP";
> + case USB_CHG_TYPE_OTHER:
> + return "USB_CHG_TYPE_OTHER";
> + case USB_CHG_TYPE_VBUS:
> + return "USB_CHG_TYPE_VBUS";
> + case USB_CHG_TYPE_UNKNOWN:
> + return "USB_CHG_TYPE_UNKNOWN";
> + default:
> + return "USB_CHG_TYPE_UNKNOWN";
> + }
> +}
> +
> +static bool cros_ec_usb_power_type_is_wall_wart(unsigned int type,
> + unsigned int role)
> +{
> + switch (type) {
> + /* FIXME : Guppy, Donnettes, and other chargers will be miscategorized
> + * because they identify with USB_CHG_TYPE_C, but we can't return true
> + * here from that code because that breaks Suzy-Q and other kinds of
> + * USB Type-C cables and peripherals.
> + */
> + case USB_CHG_TYPE_PROPRIETARY:
> + case USB_CHG_TYPE_BC12_DCP:
> + return true;
> + case USB_CHG_TYPE_PD:
> + case USB_CHG_TYPE_C:
> + case USB_CHG_TYPE_BC12_CDP:
> + case USB_CHG_TYPE_BC12_SDP:
> + case USB_CHG_TYPE_OTHER:
> + case USB_CHG_TYPE_VBUS:
> + case USB_CHG_TYPE_UNKNOWN:
> + case USB_CHG_TYPE_NONE:
> + default:
> + return false;
> + }
> +}
> +
> static int extcon_cros_ec_detect_cable(struct cros_ec_extcon_info *info,
> bool force)
> {
> struct device *dev = info->dev;
> int role, power_type;
> + unsigned int dr = DR_NONE;
> + bool pr = false;
> bool polarity = false;
> bool dp = false;
> bool mux = false;
> @@ -206,9 +278,12 @@ static int extcon_cros_ec_detect_cable(struct cros_ec_extcon_info *info,
> dev_err(dev, "failed getting role err = %d\n", role);
> return role;
> }
> + dev_dbg(dev, "disconnected\n");
> } else {
> int pd_mux_state;
>
> + dr = (role & PD_CTRL_RESP_ROLE_DATA) ? DR_HOST : DR_DEVICE;
> + pr = (role & PD_CTRL_RESP_ROLE_POWER);
> pd_mux_state = cros_ec_usb_get_pd_mux_state(info);
> if (pd_mux_state < 0)
> pd_mux_state = USB_PD_MUX_USB_ENABLED;
> @@ -216,20 +291,62 @@ static int extcon_cros_ec_detect_cable(struct cros_ec_extcon_info *info,
> dp = pd_mux_state & USB_PD_MUX_DP_ENABLED;
> mux = pd_mux_state & USB_PD_MUX_USB_ENABLED;
> hpd = pd_mux_state & USB_PD_MUX_HPD_IRQ;
> - }
>
> - if (force || info->dp != dp || info->mux != mux ||
> - info->power_type != power_type) {
> + dev_dbg(dev,
> + "connected role 0x%x pwr type %d dr %d pr %d pol %d mux %d dp %d hpd %d\n",
> + role, power_type, dr, pr, polarity, mux, dp, hpd);
> + }
>
> + /*
> + * When there is no USB host (e.g. USB PD charger),
> + * we are not really a UFP for the AP.
> + */
> + if (dr == DR_DEVICE &&
> + cros_ec_usb_power_type_is_wall_wart(power_type, role))
> + dr = DR_NONE;
> +
> + if (force || info->dr != dr || info->pr != pr || info->dp != dp ||
> + info->mux != mux || info->power_type != power_type) {
> + bool host_connected = false, device_connected = false;
> +
> + dev_dbg(dev, "Type/Role switch! type = %s role = %s\n",
> + cros_ec_usb_power_type_string(power_type),
> + cros_ec_usb_role_string(dr));
> + info->dr = dr;
> + info->pr = pr;
> info->dp = dp;
> info->mux = mux;
> info->power_type = power_type;
>
> - extcon_set_state(info->edev, EXTCON_DISP_DP, dp);
> + if (dr == DR_DEVICE)
> + device_connected = true;
> + else if (dr == DR_HOST)
> + host_connected = true;
>
> + extcon_set_state(info->edev, EXTCON_USB, device_connected);
> + extcon_set_state(info->edev, EXTCON_USB_HOST, host_connected);
> + extcon_set_state(info->edev, EXTCON_DISP_DP, dp);
> + extcon_set_property(info->edev, EXTCON_USB,
> + EXTCON_PROP_USB_VBUS,
> + (union extcon_property_value)(int)pr);
> + extcon_set_property(info->edev, EXTCON_USB_HOST,
> + EXTCON_PROP_USB_VBUS,
> + (union extcon_property_value)(int)pr);
> + extcon_set_property(info->edev, EXTCON_USB,
> + EXTCON_PROP_USB_TYPEC_POLARITY,
> + (union extcon_property_value)(int)polarity);
> + extcon_set_property(info->edev, EXTCON_USB_HOST,
> + EXTCON_PROP_USB_TYPEC_POLARITY,
> + (union extcon_property_value)(int)polarity);
> extcon_set_property(info->edev, EXTCON_DISP_DP,
> EXTCON_PROP_USB_TYPEC_POLARITY,
> (union extcon_property_value)(int)polarity);
> + extcon_set_property(info->edev, EXTCON_USB,
> + EXTCON_PROP_USB_SS,
> + (union extcon_property_value)(int)mux);
> + extcon_set_property(info->edev, EXTCON_USB_HOST,
> + EXTCON_PROP_USB_SS,
> + (union extcon_property_value)(int)mux);
> extcon_set_property(info->edev, EXTCON_DISP_DP,
> EXTCON_PROP_USB_SS,
> (union extcon_property_value)(int)mux);
> @@ -237,6 +354,8 @@ static int extcon_cros_ec_detect_cable(struct cros_ec_extcon_info *info,
> EXTCON_PROP_DISP_HPD,
> (union extcon_property_value)(int)hpd);
>
> + extcon_sync(info->edev, EXTCON_USB);
> + extcon_sync(info->edev, EXTCON_USB_HOST);
> extcon_sync(info->edev, EXTCON_DISP_DP);
>
> } else if (hpd) {
> @@ -322,13 +441,28 @@ static int extcon_cros_ec_probe(struct platform_device *pdev)
> return ret;
> }
>
> + extcon_set_property_capability(info->edev, EXTCON_USB,
> + EXTCON_PROP_USB_VBUS);
> + extcon_set_property_capability(info->edev, EXTCON_USB_HOST,
> + EXTCON_PROP_USB_VBUS);
> + extcon_set_property_capability(info->edev, EXTCON_USB,
> + EXTCON_PROP_USB_TYPEC_POLARITY);
> + extcon_set_property_capability(info->edev, EXTCON_USB_HOST,
> + EXTCON_PROP_USB_TYPEC_POLARITY);
> extcon_set_property_capability(info->edev, EXTCON_DISP_DP,
> EXTCON_PROP_USB_TYPEC_POLARITY);
> + extcon_set_property_capability(info->edev, EXTCON_USB,
> + EXTCON_PROP_USB_SS);
> + extcon_set_property_capability(info->edev, EXTCON_USB_HOST,
> + EXTCON_PROP_USB_SS);
> extcon_set_property_capability(info->edev, EXTCON_DISP_DP,
> EXTCON_PROP_USB_SS);
> extcon_set_property_capability(info->edev, EXTCON_DISP_DP,
> EXTCON_PROP_DISP_HPD);
>
> + info->dr = DR_NONE;
> + info->pr = false;
> +
> platform_set_drvdata(pdev, info);
>
> /* Get PD events from the EC */
> diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
> index 2b16e95..c907353 100644
> --- a/include/linux/mfd/cros_ec_commands.h
> +++ b/include/linux/mfd/cros_ec_commands.h
> @@ -2904,16 +2904,33 @@ enum usb_pd_control_mux {
> USB_PD_CTRL_MUX_AUTO = 5,
> };
>
> +enum usb_pd_control_swap {
> + USB_PD_CTRL_SWAP_NONE = 0,
> + USB_PD_CTRL_SWAP_DATA = 1,
> + USB_PD_CTRL_SWAP_POWER = 2,
> + USB_PD_CTRL_SWAP_VCONN = 3,
> + USB_PD_CTRL_SWAP_COUNT
> +};
> +
> struct ec_params_usb_pd_control {
> uint8_t port;
> uint8_t role;
> uint8_t mux;
> + uint8_t swap;
> } __packed;
>
> #define PD_CTRL_RESP_ENABLED_COMMS (1 << 0) /* Communication enabled */
> #define PD_CTRL_RESP_ENABLED_CONNECTED (1 << 1) /* Device connected */
> #define PD_CTRL_RESP_ENABLED_PD_CAPABLE (1 << 2) /* Partner is PD capable */
>
> +#define PD_CTRL_RESP_ROLE_POWER (1 << 0) /* 0=SNK/1=SRC */
> +#define PD_CTRL_RESP_ROLE_DATA (1 << 1) /* 0=UFP/1=DFP */
> +#define PD_CTRL_RESP_ROLE_VCONN (1 << 2) /* Vconn status */
> +#define PD_CTRL_RESP_ROLE_DR_POWER (1 << 3) /* Partner is dualrole power */
> +#define PD_CTRL_RESP_ROLE_DR_DATA (1 << 4) /* Partner is dualrole data */
> +#define PD_CTRL_RESP_ROLE_USB_COMM (1 << 5) /* Partner USB comm capable */
> +#define PD_CTRL_RESP_ROLE_EXT_POWERED (1 << 6) /* Partner externally powerd */
> +
> struct ec_response_usb_pd_control_v1 {
> uint8_t enabled;
> uint8_t role;
>
--
Best Regards,
Chanwoo Choi
Samsung Electronics
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: cw00.choi@samsung.com (Chanwoo Choi)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/3] extcon: usbc-cros-ec: add support to notify USB type cables.
Date: Thu, 07 Dec 2017 11:12:56 +0900 [thread overview]
Message-ID: <5A28A3A8.4020302@samsung.com> (raw)
In-Reply-To: <20171206111008.3079-1-enric.balletbo@collabora.com>
Hi Enric,
On 2017? 12? 06? 20:10, Enric Balletbo i Serra wrote:
> From: Benson Leung <bleung@chromium.org>
>
> Extend the driver to notify host and device type cables and the presence
> of power.
>
> Signed-off-by: Benson Leung <bleung@chromium.org>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> ---
> drivers/extcon/extcon-usbc-cros-ec.c | 142 ++++++++++++++++++++++++++++++++++-
> include/linux/mfd/cros_ec_commands.h | 17 +++++
> 2 files changed, 155 insertions(+), 4 deletions(-)
Looks good to me.
After you uses the BIT() macro as the Lee's comment on v2,
I'll merge this patch.
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
>
> diff --git a/drivers/extcon/extcon-usbc-cros-ec.c b/drivers/extcon/extcon-usbc-cros-ec.c
> index 6187f73..6721ab0 100644
> --- a/drivers/extcon/extcon-usbc-cros-ec.c
> +++ b/drivers/extcon/extcon-usbc-cros-ec.c
> @@ -34,16 +34,26 @@ struct cros_ec_extcon_info {
>
> struct notifier_block notifier;
>
> + unsigned int dr; /* data role */
> + bool pr; /* power role (true if VBUS enabled) */
> bool dp; /* DisplayPort enabled */
> bool mux; /* SuperSpeed (usb3) enabled */
> unsigned int power_type;
> };
>
> static const unsigned int usb_type_c_cable[] = {
> + EXTCON_USB,
> + EXTCON_USB_HOST,
> EXTCON_DISP_DP,
> EXTCON_NONE,
> };
>
> +enum usb_data_roles {
> + DR_NONE,
> + DR_HOST,
> + DR_DEVICE,
> +};
> +
> /**
> * cros_ec_pd_command() - Send a command to the EC.
> * @info: pointer to struct cros_ec_extcon_info
> @@ -150,6 +160,7 @@ static int cros_ec_usb_get_role(struct cros_ec_extcon_info *info,
> pd_control.port = info->port_id;
> pd_control.role = USB_PD_CTRL_ROLE_NO_CHANGE;
> pd_control.mux = USB_PD_CTRL_MUX_NO_CHANGE;
> + pd_control.swap = USB_PD_CTRL_SWAP_NONE;
> ret = cros_ec_pd_command(info, EC_CMD_USB_PD_CONTROL, 1,
> &pd_control, sizeof(pd_control),
> &resp, sizeof(resp));
> @@ -183,11 +194,72 @@ static int cros_ec_pd_get_num_ports(struct cros_ec_extcon_info *info)
> return resp.num_ports;
> }
>
> +static const char *cros_ec_usb_role_string(unsigned int role)
> +{
> + return role == DR_NONE ? "DISCONNECTED" :
> + (role == DR_HOST ? "DFP" : "UFP");
> +}
> +
> +static const char *cros_ec_usb_power_type_string(unsigned int type)
> +{
> + switch (type) {
> + case USB_CHG_TYPE_NONE:
> + return "USB_CHG_TYPE_NONE";
> + case USB_CHG_TYPE_PD:
> + return "USB_CHG_TYPE_PD";
> + case USB_CHG_TYPE_PROPRIETARY:
> + return "USB_CHG_TYPE_PROPRIETARY";
> + case USB_CHG_TYPE_C:
> + return "USB_CHG_TYPE_C";
> + case USB_CHG_TYPE_BC12_DCP:
> + return "USB_CHG_TYPE_BC12_DCP";
> + case USB_CHG_TYPE_BC12_CDP:
> + return "USB_CHG_TYPE_BC12_CDP";
> + case USB_CHG_TYPE_BC12_SDP:
> + return "USB_CHG_TYPE_BC12_SDP";
> + case USB_CHG_TYPE_OTHER:
> + return "USB_CHG_TYPE_OTHER";
> + case USB_CHG_TYPE_VBUS:
> + return "USB_CHG_TYPE_VBUS";
> + case USB_CHG_TYPE_UNKNOWN:
> + return "USB_CHG_TYPE_UNKNOWN";
> + default:
> + return "USB_CHG_TYPE_UNKNOWN";
> + }
> +}
> +
> +static bool cros_ec_usb_power_type_is_wall_wart(unsigned int type,
> + unsigned int role)
> +{
> + switch (type) {
> + /* FIXME : Guppy, Donnettes, and other chargers will be miscategorized
> + * because they identify with USB_CHG_TYPE_C, but we can't return true
> + * here from that code because that breaks Suzy-Q and other kinds of
> + * USB Type-C cables and peripherals.
> + */
> + case USB_CHG_TYPE_PROPRIETARY:
> + case USB_CHG_TYPE_BC12_DCP:
> + return true;
> + case USB_CHG_TYPE_PD:
> + case USB_CHG_TYPE_C:
> + case USB_CHG_TYPE_BC12_CDP:
> + case USB_CHG_TYPE_BC12_SDP:
> + case USB_CHG_TYPE_OTHER:
> + case USB_CHG_TYPE_VBUS:
> + case USB_CHG_TYPE_UNKNOWN:
> + case USB_CHG_TYPE_NONE:
> + default:
> + return false;
> + }
> +}
> +
> static int extcon_cros_ec_detect_cable(struct cros_ec_extcon_info *info,
> bool force)
> {
> struct device *dev = info->dev;
> int role, power_type;
> + unsigned int dr = DR_NONE;
> + bool pr = false;
> bool polarity = false;
> bool dp = false;
> bool mux = false;
> @@ -206,9 +278,12 @@ static int extcon_cros_ec_detect_cable(struct cros_ec_extcon_info *info,
> dev_err(dev, "failed getting role err = %d\n", role);
> return role;
> }
> + dev_dbg(dev, "disconnected\n");
> } else {
> int pd_mux_state;
>
> + dr = (role & PD_CTRL_RESP_ROLE_DATA) ? DR_HOST : DR_DEVICE;
> + pr = (role & PD_CTRL_RESP_ROLE_POWER);
> pd_mux_state = cros_ec_usb_get_pd_mux_state(info);
> if (pd_mux_state < 0)
> pd_mux_state = USB_PD_MUX_USB_ENABLED;
> @@ -216,20 +291,62 @@ static int extcon_cros_ec_detect_cable(struct cros_ec_extcon_info *info,
> dp = pd_mux_state & USB_PD_MUX_DP_ENABLED;
> mux = pd_mux_state & USB_PD_MUX_USB_ENABLED;
> hpd = pd_mux_state & USB_PD_MUX_HPD_IRQ;
> - }
>
> - if (force || info->dp != dp || info->mux != mux ||
> - info->power_type != power_type) {
> + dev_dbg(dev,
> + "connected role 0x%x pwr type %d dr %d pr %d pol %d mux %d dp %d hpd %d\n",
> + role, power_type, dr, pr, polarity, mux, dp, hpd);
> + }
>
> + /*
> + * When there is no USB host (e.g. USB PD charger),
> + * we are not really a UFP for the AP.
> + */
> + if (dr == DR_DEVICE &&
> + cros_ec_usb_power_type_is_wall_wart(power_type, role))
> + dr = DR_NONE;
> +
> + if (force || info->dr != dr || info->pr != pr || info->dp != dp ||
> + info->mux != mux || info->power_type != power_type) {
> + bool host_connected = false, device_connected = false;
> +
> + dev_dbg(dev, "Type/Role switch! type = %s role = %s\n",
> + cros_ec_usb_power_type_string(power_type),
> + cros_ec_usb_role_string(dr));
> + info->dr = dr;
> + info->pr = pr;
> info->dp = dp;
> info->mux = mux;
> info->power_type = power_type;
>
> - extcon_set_state(info->edev, EXTCON_DISP_DP, dp);
> + if (dr == DR_DEVICE)
> + device_connected = true;
> + else if (dr == DR_HOST)
> + host_connected = true;
>
> + extcon_set_state(info->edev, EXTCON_USB, device_connected);
> + extcon_set_state(info->edev, EXTCON_USB_HOST, host_connected);
> + extcon_set_state(info->edev, EXTCON_DISP_DP, dp);
> + extcon_set_property(info->edev, EXTCON_USB,
> + EXTCON_PROP_USB_VBUS,
> + (union extcon_property_value)(int)pr);
> + extcon_set_property(info->edev, EXTCON_USB_HOST,
> + EXTCON_PROP_USB_VBUS,
> + (union extcon_property_value)(int)pr);
> + extcon_set_property(info->edev, EXTCON_USB,
> + EXTCON_PROP_USB_TYPEC_POLARITY,
> + (union extcon_property_value)(int)polarity);
> + extcon_set_property(info->edev, EXTCON_USB_HOST,
> + EXTCON_PROP_USB_TYPEC_POLARITY,
> + (union extcon_property_value)(int)polarity);
> extcon_set_property(info->edev, EXTCON_DISP_DP,
> EXTCON_PROP_USB_TYPEC_POLARITY,
> (union extcon_property_value)(int)polarity);
> + extcon_set_property(info->edev, EXTCON_USB,
> + EXTCON_PROP_USB_SS,
> + (union extcon_property_value)(int)mux);
> + extcon_set_property(info->edev, EXTCON_USB_HOST,
> + EXTCON_PROP_USB_SS,
> + (union extcon_property_value)(int)mux);
> extcon_set_property(info->edev, EXTCON_DISP_DP,
> EXTCON_PROP_USB_SS,
> (union extcon_property_value)(int)mux);
> @@ -237,6 +354,8 @@ static int extcon_cros_ec_detect_cable(struct cros_ec_extcon_info *info,
> EXTCON_PROP_DISP_HPD,
> (union extcon_property_value)(int)hpd);
>
> + extcon_sync(info->edev, EXTCON_USB);
> + extcon_sync(info->edev, EXTCON_USB_HOST);
> extcon_sync(info->edev, EXTCON_DISP_DP);
>
> } else if (hpd) {
> @@ -322,13 +441,28 @@ static int extcon_cros_ec_probe(struct platform_device *pdev)
> return ret;
> }
>
> + extcon_set_property_capability(info->edev, EXTCON_USB,
> + EXTCON_PROP_USB_VBUS);
> + extcon_set_property_capability(info->edev, EXTCON_USB_HOST,
> + EXTCON_PROP_USB_VBUS);
> + extcon_set_property_capability(info->edev, EXTCON_USB,
> + EXTCON_PROP_USB_TYPEC_POLARITY);
> + extcon_set_property_capability(info->edev, EXTCON_USB_HOST,
> + EXTCON_PROP_USB_TYPEC_POLARITY);
> extcon_set_property_capability(info->edev, EXTCON_DISP_DP,
> EXTCON_PROP_USB_TYPEC_POLARITY);
> + extcon_set_property_capability(info->edev, EXTCON_USB,
> + EXTCON_PROP_USB_SS);
> + extcon_set_property_capability(info->edev, EXTCON_USB_HOST,
> + EXTCON_PROP_USB_SS);
> extcon_set_property_capability(info->edev, EXTCON_DISP_DP,
> EXTCON_PROP_USB_SS);
> extcon_set_property_capability(info->edev, EXTCON_DISP_DP,
> EXTCON_PROP_DISP_HPD);
>
> + info->dr = DR_NONE;
> + info->pr = false;
> +
> platform_set_drvdata(pdev, info);
>
> /* Get PD events from the EC */
> diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
> index 2b16e95..c907353 100644
> --- a/include/linux/mfd/cros_ec_commands.h
> +++ b/include/linux/mfd/cros_ec_commands.h
> @@ -2904,16 +2904,33 @@ enum usb_pd_control_mux {
> USB_PD_CTRL_MUX_AUTO = 5,
> };
>
> +enum usb_pd_control_swap {
> + USB_PD_CTRL_SWAP_NONE = 0,
> + USB_PD_CTRL_SWAP_DATA = 1,
> + USB_PD_CTRL_SWAP_POWER = 2,
> + USB_PD_CTRL_SWAP_VCONN = 3,
> + USB_PD_CTRL_SWAP_COUNT
> +};
> +
> struct ec_params_usb_pd_control {
> uint8_t port;
> uint8_t role;
> uint8_t mux;
> + uint8_t swap;
> } __packed;
>
> #define PD_CTRL_RESP_ENABLED_COMMS (1 << 0) /* Communication enabled */
> #define PD_CTRL_RESP_ENABLED_CONNECTED (1 << 1) /* Device connected */
> #define PD_CTRL_RESP_ENABLED_PD_CAPABLE (1 << 2) /* Partner is PD capable */
>
> +#define PD_CTRL_RESP_ROLE_POWER (1 << 0) /* 0=SNK/1=SRC */
> +#define PD_CTRL_RESP_ROLE_DATA (1 << 1) /* 0=UFP/1=DFP */
> +#define PD_CTRL_RESP_ROLE_VCONN (1 << 2) /* Vconn status */
> +#define PD_CTRL_RESP_ROLE_DR_POWER (1 << 3) /* Partner is dualrole power */
> +#define PD_CTRL_RESP_ROLE_DR_DATA (1 << 4) /* Partner is dualrole data */
> +#define PD_CTRL_RESP_ROLE_USB_COMM (1 << 5) /* Partner USB comm capable */
> +#define PD_CTRL_RESP_ROLE_EXT_POWERED (1 << 6) /* Partner externally powerd */
> +
> struct ec_response_usb_pd_control_v1 {
> uint8_t enabled;
> uint8_t role;
>
--
Best Regards,
Chanwoo Choi
Samsung Electronics
WARNING: multiple messages have this Message-ID (diff)
From: Chanwoo Choi <cw00.choi@samsung.com>
To: Enric Balletbo i Serra <enric.balletbo@collabora.com>,
MyungJoo Ham <myungjoo.ham@samsung.com>,
Lee Jones <lee.jones@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Heiko Stuebner <heiko@sntech.de>
Cc: groeck@chromium.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
Benson Leung <bleung@chromium.org>
Subject: Re: [PATCH 1/3] extcon: usbc-cros-ec: add support to notify USB type cables.
Date: Thu, 07 Dec 2017 11:12:56 +0900 [thread overview]
Message-ID: <5A28A3A8.4020302@samsung.com> (raw)
In-Reply-To: <20171206111008.3079-1-enric.balletbo@collabora.com>
Hi Enric,
On 2017년 12월 06일 20:10, Enric Balletbo i Serra wrote:
> From: Benson Leung <bleung@chromium.org>
>
> Extend the driver to notify host and device type cables and the presence
> of power.
>
> Signed-off-by: Benson Leung <bleung@chromium.org>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> ---
> drivers/extcon/extcon-usbc-cros-ec.c | 142 ++++++++++++++++++++++++++++++++++-
> include/linux/mfd/cros_ec_commands.h | 17 +++++
> 2 files changed, 155 insertions(+), 4 deletions(-)
Looks good to me.
After you uses the BIT() macro as the Lee's comment on v2,
I'll merge this patch.
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
>
> diff --git a/drivers/extcon/extcon-usbc-cros-ec.c b/drivers/extcon/extcon-usbc-cros-ec.c
> index 6187f73..6721ab0 100644
> --- a/drivers/extcon/extcon-usbc-cros-ec.c
> +++ b/drivers/extcon/extcon-usbc-cros-ec.c
> @@ -34,16 +34,26 @@ struct cros_ec_extcon_info {
>
> struct notifier_block notifier;
>
> + unsigned int dr; /* data role */
> + bool pr; /* power role (true if VBUS enabled) */
> bool dp; /* DisplayPort enabled */
> bool mux; /* SuperSpeed (usb3) enabled */
> unsigned int power_type;
> };
>
> static const unsigned int usb_type_c_cable[] = {
> + EXTCON_USB,
> + EXTCON_USB_HOST,
> EXTCON_DISP_DP,
> EXTCON_NONE,
> };
>
> +enum usb_data_roles {
> + DR_NONE,
> + DR_HOST,
> + DR_DEVICE,
> +};
> +
> /**
> * cros_ec_pd_command() - Send a command to the EC.
> * @info: pointer to struct cros_ec_extcon_info
> @@ -150,6 +160,7 @@ static int cros_ec_usb_get_role(struct cros_ec_extcon_info *info,
> pd_control.port = info->port_id;
> pd_control.role = USB_PD_CTRL_ROLE_NO_CHANGE;
> pd_control.mux = USB_PD_CTRL_MUX_NO_CHANGE;
> + pd_control.swap = USB_PD_CTRL_SWAP_NONE;
> ret = cros_ec_pd_command(info, EC_CMD_USB_PD_CONTROL, 1,
> &pd_control, sizeof(pd_control),
> &resp, sizeof(resp));
> @@ -183,11 +194,72 @@ static int cros_ec_pd_get_num_ports(struct cros_ec_extcon_info *info)
> return resp.num_ports;
> }
>
> +static const char *cros_ec_usb_role_string(unsigned int role)
> +{
> + return role == DR_NONE ? "DISCONNECTED" :
> + (role == DR_HOST ? "DFP" : "UFP");
> +}
> +
> +static const char *cros_ec_usb_power_type_string(unsigned int type)
> +{
> + switch (type) {
> + case USB_CHG_TYPE_NONE:
> + return "USB_CHG_TYPE_NONE";
> + case USB_CHG_TYPE_PD:
> + return "USB_CHG_TYPE_PD";
> + case USB_CHG_TYPE_PROPRIETARY:
> + return "USB_CHG_TYPE_PROPRIETARY";
> + case USB_CHG_TYPE_C:
> + return "USB_CHG_TYPE_C";
> + case USB_CHG_TYPE_BC12_DCP:
> + return "USB_CHG_TYPE_BC12_DCP";
> + case USB_CHG_TYPE_BC12_CDP:
> + return "USB_CHG_TYPE_BC12_CDP";
> + case USB_CHG_TYPE_BC12_SDP:
> + return "USB_CHG_TYPE_BC12_SDP";
> + case USB_CHG_TYPE_OTHER:
> + return "USB_CHG_TYPE_OTHER";
> + case USB_CHG_TYPE_VBUS:
> + return "USB_CHG_TYPE_VBUS";
> + case USB_CHG_TYPE_UNKNOWN:
> + return "USB_CHG_TYPE_UNKNOWN";
> + default:
> + return "USB_CHG_TYPE_UNKNOWN";
> + }
> +}
> +
> +static bool cros_ec_usb_power_type_is_wall_wart(unsigned int type,
> + unsigned int role)
> +{
> + switch (type) {
> + /* FIXME : Guppy, Donnettes, and other chargers will be miscategorized
> + * because they identify with USB_CHG_TYPE_C, but we can't return true
> + * here from that code because that breaks Suzy-Q and other kinds of
> + * USB Type-C cables and peripherals.
> + */
> + case USB_CHG_TYPE_PROPRIETARY:
> + case USB_CHG_TYPE_BC12_DCP:
> + return true;
> + case USB_CHG_TYPE_PD:
> + case USB_CHG_TYPE_C:
> + case USB_CHG_TYPE_BC12_CDP:
> + case USB_CHG_TYPE_BC12_SDP:
> + case USB_CHG_TYPE_OTHER:
> + case USB_CHG_TYPE_VBUS:
> + case USB_CHG_TYPE_UNKNOWN:
> + case USB_CHG_TYPE_NONE:
> + default:
> + return false;
> + }
> +}
> +
> static int extcon_cros_ec_detect_cable(struct cros_ec_extcon_info *info,
> bool force)
> {
> struct device *dev = info->dev;
> int role, power_type;
> + unsigned int dr = DR_NONE;
> + bool pr = false;
> bool polarity = false;
> bool dp = false;
> bool mux = false;
> @@ -206,9 +278,12 @@ static int extcon_cros_ec_detect_cable(struct cros_ec_extcon_info *info,
> dev_err(dev, "failed getting role err = %d\n", role);
> return role;
> }
> + dev_dbg(dev, "disconnected\n");
> } else {
> int pd_mux_state;
>
> + dr = (role & PD_CTRL_RESP_ROLE_DATA) ? DR_HOST : DR_DEVICE;
> + pr = (role & PD_CTRL_RESP_ROLE_POWER);
> pd_mux_state = cros_ec_usb_get_pd_mux_state(info);
> if (pd_mux_state < 0)
> pd_mux_state = USB_PD_MUX_USB_ENABLED;
> @@ -216,20 +291,62 @@ static int extcon_cros_ec_detect_cable(struct cros_ec_extcon_info *info,
> dp = pd_mux_state & USB_PD_MUX_DP_ENABLED;
> mux = pd_mux_state & USB_PD_MUX_USB_ENABLED;
> hpd = pd_mux_state & USB_PD_MUX_HPD_IRQ;
> - }
>
> - if (force || info->dp != dp || info->mux != mux ||
> - info->power_type != power_type) {
> + dev_dbg(dev,
> + "connected role 0x%x pwr type %d dr %d pr %d pol %d mux %d dp %d hpd %d\n",
> + role, power_type, dr, pr, polarity, mux, dp, hpd);
> + }
>
> + /*
> + * When there is no USB host (e.g. USB PD charger),
> + * we are not really a UFP for the AP.
> + */
> + if (dr == DR_DEVICE &&
> + cros_ec_usb_power_type_is_wall_wart(power_type, role))
> + dr = DR_NONE;
> +
> + if (force || info->dr != dr || info->pr != pr || info->dp != dp ||
> + info->mux != mux || info->power_type != power_type) {
> + bool host_connected = false, device_connected = false;
> +
> + dev_dbg(dev, "Type/Role switch! type = %s role = %s\n",
> + cros_ec_usb_power_type_string(power_type),
> + cros_ec_usb_role_string(dr));
> + info->dr = dr;
> + info->pr = pr;
> info->dp = dp;
> info->mux = mux;
> info->power_type = power_type;
>
> - extcon_set_state(info->edev, EXTCON_DISP_DP, dp);
> + if (dr == DR_DEVICE)
> + device_connected = true;
> + else if (dr == DR_HOST)
> + host_connected = true;
>
> + extcon_set_state(info->edev, EXTCON_USB, device_connected);
> + extcon_set_state(info->edev, EXTCON_USB_HOST, host_connected);
> + extcon_set_state(info->edev, EXTCON_DISP_DP, dp);
> + extcon_set_property(info->edev, EXTCON_USB,
> + EXTCON_PROP_USB_VBUS,
> + (union extcon_property_value)(int)pr);
> + extcon_set_property(info->edev, EXTCON_USB_HOST,
> + EXTCON_PROP_USB_VBUS,
> + (union extcon_property_value)(int)pr);
> + extcon_set_property(info->edev, EXTCON_USB,
> + EXTCON_PROP_USB_TYPEC_POLARITY,
> + (union extcon_property_value)(int)polarity);
> + extcon_set_property(info->edev, EXTCON_USB_HOST,
> + EXTCON_PROP_USB_TYPEC_POLARITY,
> + (union extcon_property_value)(int)polarity);
> extcon_set_property(info->edev, EXTCON_DISP_DP,
> EXTCON_PROP_USB_TYPEC_POLARITY,
> (union extcon_property_value)(int)polarity);
> + extcon_set_property(info->edev, EXTCON_USB,
> + EXTCON_PROP_USB_SS,
> + (union extcon_property_value)(int)mux);
> + extcon_set_property(info->edev, EXTCON_USB_HOST,
> + EXTCON_PROP_USB_SS,
> + (union extcon_property_value)(int)mux);
> extcon_set_property(info->edev, EXTCON_DISP_DP,
> EXTCON_PROP_USB_SS,
> (union extcon_property_value)(int)mux);
> @@ -237,6 +354,8 @@ static int extcon_cros_ec_detect_cable(struct cros_ec_extcon_info *info,
> EXTCON_PROP_DISP_HPD,
> (union extcon_property_value)(int)hpd);
>
> + extcon_sync(info->edev, EXTCON_USB);
> + extcon_sync(info->edev, EXTCON_USB_HOST);
> extcon_sync(info->edev, EXTCON_DISP_DP);
>
> } else if (hpd) {
> @@ -322,13 +441,28 @@ static int extcon_cros_ec_probe(struct platform_device *pdev)
> return ret;
> }
>
> + extcon_set_property_capability(info->edev, EXTCON_USB,
> + EXTCON_PROP_USB_VBUS);
> + extcon_set_property_capability(info->edev, EXTCON_USB_HOST,
> + EXTCON_PROP_USB_VBUS);
> + extcon_set_property_capability(info->edev, EXTCON_USB,
> + EXTCON_PROP_USB_TYPEC_POLARITY);
> + extcon_set_property_capability(info->edev, EXTCON_USB_HOST,
> + EXTCON_PROP_USB_TYPEC_POLARITY);
> extcon_set_property_capability(info->edev, EXTCON_DISP_DP,
> EXTCON_PROP_USB_TYPEC_POLARITY);
> + extcon_set_property_capability(info->edev, EXTCON_USB,
> + EXTCON_PROP_USB_SS);
> + extcon_set_property_capability(info->edev, EXTCON_USB_HOST,
> + EXTCON_PROP_USB_SS);
> extcon_set_property_capability(info->edev, EXTCON_DISP_DP,
> EXTCON_PROP_USB_SS);
> extcon_set_property_capability(info->edev, EXTCON_DISP_DP,
> EXTCON_PROP_DISP_HPD);
>
> + info->dr = DR_NONE;
> + info->pr = false;
> +
> platform_set_drvdata(pdev, info);
>
> /* Get PD events from the EC */
> diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
> index 2b16e95..c907353 100644
> --- a/include/linux/mfd/cros_ec_commands.h
> +++ b/include/linux/mfd/cros_ec_commands.h
> @@ -2904,16 +2904,33 @@ enum usb_pd_control_mux {
> USB_PD_CTRL_MUX_AUTO = 5,
> };
>
> +enum usb_pd_control_swap {
> + USB_PD_CTRL_SWAP_NONE = 0,
> + USB_PD_CTRL_SWAP_DATA = 1,
> + USB_PD_CTRL_SWAP_POWER = 2,
> + USB_PD_CTRL_SWAP_VCONN = 3,
> + USB_PD_CTRL_SWAP_COUNT
> +};
> +
> struct ec_params_usb_pd_control {
> uint8_t port;
> uint8_t role;
> uint8_t mux;
> + uint8_t swap;
> } __packed;
>
> #define PD_CTRL_RESP_ENABLED_COMMS (1 << 0) /* Communication enabled */
> #define PD_CTRL_RESP_ENABLED_CONNECTED (1 << 1) /* Device connected */
> #define PD_CTRL_RESP_ENABLED_PD_CAPABLE (1 << 2) /* Partner is PD capable */
>
> +#define PD_CTRL_RESP_ROLE_POWER (1 << 0) /* 0=SNK/1=SRC */
> +#define PD_CTRL_RESP_ROLE_DATA (1 << 1) /* 0=UFP/1=DFP */
> +#define PD_CTRL_RESP_ROLE_VCONN (1 << 2) /* Vconn status */
> +#define PD_CTRL_RESP_ROLE_DR_POWER (1 << 3) /* Partner is dualrole power */
> +#define PD_CTRL_RESP_ROLE_DR_DATA (1 << 4) /* Partner is dualrole data */
> +#define PD_CTRL_RESP_ROLE_USB_COMM (1 << 5) /* Partner USB comm capable */
> +#define PD_CTRL_RESP_ROLE_EXT_POWERED (1 << 6) /* Partner externally powerd */
> +
> struct ec_response_usb_pd_control_v1 {
> uint8_t enabled;
> uint8_t role;
>
--
Best Regards,
Chanwoo Choi
Samsung Electronics
next prev parent reply other threads:[~2017-12-07 2:12 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20171206111048epcas3p2b412288717b0f8197c85edaab5c9a242@epcas3p2.samsung.com>
2017-12-06 11:10 ` [PATCH 1/3] extcon: usbc-cros-ec: add support to notify USB type cables Enric Balletbo i Serra
2017-12-06 11:10 ` Enric Balletbo i Serra
2017-12-06 11:10 ` Enric Balletbo i Serra
2017-12-06 11:10 ` [PATCH 2/3] arm64: dts: rockchip: add usb3-phy phandle for dwc3 Enric Balletbo i Serra
2017-12-06 11:10 ` Enric Balletbo i Serra
2017-12-06 11:10 ` Enric Balletbo i Serra
[not found] ` <20171206111008.3079-2-enric.balletbo-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>
2017-12-06 11:20 ` Heiko Stübner
2017-12-06 11:20 ` Heiko Stübner
2017-12-06 11:20 ` Heiko Stübner
2017-12-06 11:27 ` Enric Balletbo i Serra
2017-12-06 11:27 ` Enric Balletbo i Serra
2017-12-06 11:27 ` Enric Balletbo i Serra
2017-12-06 15:43 ` [PATCH 1/3] extcon: usbc-cros-ec: add support to notify USB type cables Lee Jones
2017-12-06 15:43 ` Lee Jones
2017-12-06 15:43 ` Lee Jones
[not found] ` <20171206111008.3079-1-enric.balletbo-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>
2017-12-06 11:10 ` [PATCH 3/3] arm64: dts: rockchip: add extcon nodes and enable tcphy Enric Balletbo i Serra
2017-12-06 11:10 ` Enric Balletbo i Serra
2017-12-06 11:10 ` Enric Balletbo i Serra
[not found] ` <20171206111008.3079-3-enric.balletbo-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>
2017-12-06 17:29 ` Brian Norris
2017-12-06 17:29 ` Brian Norris
2017-12-06 17:29 ` Brian Norris
[not found] ` <20171206172919.GA87458-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>
2017-12-13 10:28 ` Enric Balletbo Serra
2017-12-13 10:28 ` Enric Balletbo Serra
2017-12-13 10:28 ` Enric Balletbo Serra
2017-12-07 2:12 ` Chanwoo Choi [this message]
2017-12-07 2:12 ` [PATCH 1/3] extcon: usbc-cros-ec: add support to notify USB type cables Chanwoo Choi
2017-12-07 2:12 ` Chanwoo Choi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5A28A3A8.4020302@samsung.com \
--to=cw00.choi-sze3o3uu22jbdgjk7y7tuq@public.gmane.org \
--cc=bleung-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=enric.balletbo-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org \
--cc=groeck-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
--cc=heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org \
--cc=lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=myungjoo.ham-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.