* [PATCH 1/2] arm64: dts: exynos: Use lower case hex addresses in node unit addresses @ 2017-12-20 19:27 ` Krzysztof Kozlowski 0 siblings, 0 replies; 10+ messages in thread From: Krzysztof Kozlowski @ 2017-12-20 19:27 UTC (permalink / raw) To: Rob Herring, Mark Rutland, Catalin Marinas, Will Deacon, Kukjin Kim, Krzysztof Kozlowski, Chanwoo Choi, Marek Szyprowski, Andrzej Hajda, Alim Akhtar, devicetree, linux-arm-kernel, linux-samsung-soc, linux-kernel Convert all hex addresses in node unit addresses to lower case to fix warnings like: arch/arm64/boot/dts/exynos/exynos5433-tm2e.dtb: Warning (simple_bus_reg): Node /soc/video-scaler@13C00000 simple-bus unit address format error, expected "13c00000" Conversion was done using sed: $ sed -e 's/@\([a-zA-Z0-9_-]*\) {/@\L\1 {/' -i arch/arm64/boot/dts/exynos/*.dts* Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> --- arch/arm64/boot/dts/exynos/exynos5433.dtsi | 8 ++++---- arch/arm64/boot/dts/exynos/exynos7.dtsi | 4 ++-- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index 1962b8074349..0ba5df825eff 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -994,7 +994,7 @@ reg = <0x145f0000 0x1038>; }; - gsc_0: video-scaler@13C00000 { + gsc_0: video-scaler@13c00000 { compatible = "samsung,exynos5433-gsc"; reg = <0x13c00000 0x1000>; interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>; @@ -1008,7 +1008,7 @@ power-domains = <&pd_gscl>; }; - gsc_1: video-scaler@13C10000 { + gsc_1: video-scaler@13c10000 { compatible = "samsung,exynos5433-gsc"; reg = <0x13c10000 0x1000>; interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>; @@ -1022,7 +1022,7 @@ power-domains = <&pd_gscl>; }; - gsc_2: video-scaler@13C20000 { + gsc_2: video-scaler@13c20000 { compatible = "samsung,exynos5433-gsc"; reg = <0x13c20000 0x1000>; interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; @@ -1049,7 +1049,7 @@ power-domains = <&pd_mscl>; }; - mfc: codec@152E0000 { + mfc: codec@152e0000 { compatible = "samsung,exynos5433-mfc"; reg = <0x152E0000 0x10000>; interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi index 9a3fbed1765a..3504837b1d43 100644 --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi @@ -103,7 +103,7 @@ #size-cells = <1>; ranges; - pdma0: pdma@10E10000 { + pdma0: pdma@10e10000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x10E10000 0x1000>; interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; @@ -114,7 +114,7 @@ #dma-requests = <32>; }; - pdma1: pdma@10EB0000 { + pdma1: pdma@10eb0000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x10EB0000 0x1000>; interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; -- 2.11.0 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 1/2] arm64: dts: exynos: Use lower case hex addresses in node unit addresses @ 2017-12-20 19:27 ` Krzysztof Kozlowski 0 siblings, 0 replies; 10+ messages in thread From: Krzysztof Kozlowski @ 2017-12-20 19:27 UTC (permalink / raw) To: linux-arm-kernel Convert all hex addresses in node unit addresses to lower case to fix warnings like: arch/arm64/boot/dts/exynos/exynos5433-tm2e.dtb: Warning (simple_bus_reg): Node /soc/video-scaler at 13C00000 simple-bus unit address format error, expected "13c00000" Conversion was done using sed: $ sed -e 's/@\([a-zA-Z0-9_-]*\) {/@\L\1 {/' -i arch/arm64/boot/dts/exynos/*.dts* Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> --- arch/arm64/boot/dts/exynos/exynos5433.dtsi | 8 ++++---- arch/arm64/boot/dts/exynos/exynos7.dtsi | 4 ++-- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index 1962b8074349..0ba5df825eff 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -994,7 +994,7 @@ reg = <0x145f0000 0x1038>; }; - gsc_0: video-scaler at 13C00000 { + gsc_0: video-scaler at 13c00000 { compatible = "samsung,exynos5433-gsc"; reg = <0x13c00000 0x1000>; interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>; @@ -1008,7 +1008,7 @@ power-domains = <&pd_gscl>; }; - gsc_1: video-scaler at 13C10000 { + gsc_1: video-scaler at 13c10000 { compatible = "samsung,exynos5433-gsc"; reg = <0x13c10000 0x1000>; interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>; @@ -1022,7 +1022,7 @@ power-domains = <&pd_gscl>; }; - gsc_2: video-scaler at 13C20000 { + gsc_2: video-scaler at 13c20000 { compatible = "samsung,exynos5433-gsc"; reg = <0x13c20000 0x1000>; interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; @@ -1049,7 +1049,7 @@ power-domains = <&pd_mscl>; }; - mfc: codec at 152E0000 { + mfc: codec at 152e0000 { compatible = "samsung,exynos5433-mfc"; reg = <0x152E0000 0x10000>; interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi index 9a3fbed1765a..3504837b1d43 100644 --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi @@ -103,7 +103,7 @@ #size-cells = <1>; ranges; - pdma0: pdma at 10E10000 { + pdma0: pdma at 10e10000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x10E10000 0x1000>; interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; @@ -114,7 +114,7 @@ #dma-requests = <32>; }; - pdma1: pdma at 10EB0000 { + pdma1: pdma at 10eb0000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x10EB0000 0x1000>; interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; -- 2.11.0 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 2/2] arm64: dts: exynos: Fix typo in MSCL clock controller unit address 2017-12-20 19:27 ` Krzysztof Kozlowski @ 2017-12-20 19:27 ` Krzysztof Kozlowski -1 siblings, 0 replies; 10+ messages in thread From: Krzysztof Kozlowski @ 2017-12-20 19:27 UTC (permalink / raw) To: Rob Herring, Mark Rutland, Catalin Marinas, Will Deacon, Kukjin Kim, Krzysztof Kozlowski, Chanwoo Choi, Marek Szyprowski, Andrzej Hajda, Alim Akhtar, devicetree, linux-arm-kernel, linux-samsung-soc, linux-kernel Fix typo in unit address of MSCL clock controller (the reg entry is correct). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> --- arch/arm64/boot/dts/exynos/exynos5433.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index 0ba5df825eff..3e8311c60d1b 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -468,7 +468,7 @@ clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_ATLAS>; }; - cmu_mscl: clock-controller@105d0000 { + cmu_mscl: clock-controller@150d0000 { compatible = "samsung,exynos5433-cmu-mscl"; reg = <0x150d0000 0x1000>; #clock-cells = <1>; -- 2.11.0 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 2/2] arm64: dts: exynos: Fix typo in MSCL clock controller unit address @ 2017-12-20 19:27 ` Krzysztof Kozlowski 0 siblings, 0 replies; 10+ messages in thread From: Krzysztof Kozlowski @ 2017-12-20 19:27 UTC (permalink / raw) To: linux-arm-kernel Fix typo in unit address of MSCL clock controller (the reg entry is correct). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> --- arch/arm64/boot/dts/exynos/exynos5433.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index 0ba5df825eff..3e8311c60d1b 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -468,7 +468,7 @@ clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_ATLAS>; }; - cmu_mscl: clock-controller at 105d0000 { + cmu_mscl: clock-controller at 150d0000 { compatible = "samsung,exynos5433-cmu-mscl"; reg = <0x150d0000 0x1000>; #clock-cells = <1>; -- 2.11.0 ^ permalink raw reply related [flat|nested] 10+ messages in thread
[parent not found: <20171220192702.32515-2-krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>]
* Re: [PATCH 2/2] arm64: dts: exynos: Fix typo in MSCL clock controller unit address 2017-12-20 19:27 ` Krzysztof Kozlowski (?) @ 2017-12-21 0:54 ` Chanwoo Choi -1 siblings, 0 replies; 10+ messages in thread From: Chanwoo Choi @ 2017-12-21 0:54 UTC (permalink / raw) To: Krzysztof Kozlowski, Rob Herring, Mark Rutland, Catalin Marinas, Will Deacon, Kukjin Kim, Marek Szyprowski, Andrzej Hajda, Alim Akhtar, devicetree-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA, linux-kernel-u79uwXL29TY76Z2rM5mHXA On 2017년 12월 21일 04:27, Krzysztof Kozlowski wrote: > Fix typo in unit address of MSCL clock controller (the reg entry is > correct). > > Signed-off-by: Krzysztof Kozlowski <krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> > --- > arch/arm64/boot/dts/exynos/exynos5433.dtsi | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi > index 0ba5df825eff..3e8311c60d1b 100644 > --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi > +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi > @@ -468,7 +468,7 @@ > clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_ATLAS>; > }; > > - cmu_mscl: clock-controller@105d0000 { > + cmu_mscl: clock-controller@150d0000 { > compatible = "samsung,exynos5433-cmu-mscl"; > reg = <0x150d0000 0x1000>; > #clock-cells = <1>; > Looks good to me. Reviewed-by: Chanwoo Choi <cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org> -- Best Regards, Chanwoo Choi Samsung Electronics -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 2/2] arm64: dts: exynos: Fix typo in MSCL clock controller unit address @ 2017-12-21 0:54 ` Chanwoo Choi 0 siblings, 0 replies; 10+ messages in thread From: Chanwoo Choi @ 2017-12-21 0:54 UTC (permalink / raw) To: Krzysztof Kozlowski, Rob Herring, Mark Rutland, Catalin Marinas, Will Deacon, Kukjin Kim, Marek Szyprowski, Andrzej Hajda, Alim Akhtar, devicetree, linux-arm-kernel, linux-samsung-soc, linux-kernel On 2017년 12월 21일 04:27, Krzysztof Kozlowski wrote: > Fix typo in unit address of MSCL clock controller (the reg entry is > correct). > > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> > --- > arch/arm64/boot/dts/exynos/exynos5433.dtsi | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi > index 0ba5df825eff..3e8311c60d1b 100644 > --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi > +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi > @@ -468,7 +468,7 @@ > clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_ATLAS>; > }; > > - cmu_mscl: clock-controller@105d0000 { > + cmu_mscl: clock-controller@150d0000 { > compatible = "samsung,exynos5433-cmu-mscl"; > reg = <0x150d0000 0x1000>; > #clock-cells = <1>; > Looks good to me. Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> -- Best Regards, Chanwoo Choi Samsung Electronics ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 2/2] arm64: dts: exynos: Fix typo in MSCL clock controller unit address @ 2017-12-21 0:54 ` Chanwoo Choi 0 siblings, 0 replies; 10+ messages in thread From: Chanwoo Choi @ 2017-12-21 0:54 UTC (permalink / raw) To: linux-arm-kernel On 2017? 12? 21? 04:27, Krzysztof Kozlowski wrote: > Fix typo in unit address of MSCL clock controller (the reg entry is > correct). > > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> > --- > arch/arm64/boot/dts/exynos/exynos5433.dtsi | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi > index 0ba5df825eff..3e8311c60d1b 100644 > --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi > +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi > @@ -468,7 +468,7 @@ > clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_ATLAS>; > }; > > - cmu_mscl: clock-controller at 105d0000 { > + cmu_mscl: clock-controller at 150d0000 { > compatible = "samsung,exynos5433-cmu-mscl"; > reg = <0x150d0000 0x1000>; > #clock-cells = <1>; > Looks good to me. Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> -- Best Regards, Chanwoo Choi Samsung Electronics ^ permalink raw reply [flat|nested] 10+ messages in thread
[parent not found: <20171220192702.32515-1-krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>]
* Re: [PATCH 1/2] arm64: dts: exynos: Use lower case hex addresses in node unit addresses 2017-12-20 19:27 ` Krzysztof Kozlowski (?) @ 2017-12-21 0:51 ` Chanwoo Choi -1 siblings, 0 replies; 10+ messages in thread From: Chanwoo Choi @ 2017-12-21 0:51 UTC (permalink / raw) To: Krzysztof Kozlowski, Rob Herring, Mark Rutland, Catalin Marinas, Will Deacon, Kukjin Kim, Marek Szyprowski, Andrzej Hajda, Alim Akhtar, devicetree-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA, linux-kernel-u79uwXL29TY76Z2rM5mHXA Dear Krzysztof, On 2017년 12월 21일 04:27, Krzysztof Kozlowski wrote: > Convert all hex addresses in node unit addresses to lower case to > fix warnings like: > arch/arm64/boot/dts/exynos/exynos5433-tm2e.dtb: Warning (simple_bus_reg): > Node /soc/video-scaler@13C00000 simple-bus unit address format error, expected "13c00000" > > Conversion was done using sed: > $ sed -e 's/@\([a-zA-Z0-9_-]*\) {/@\L\1 {/' -i arch/arm64/boot/dts/exynos/*.dts* > > Signed-off-by: Krzysztof Kozlowski <krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> > --- > arch/arm64/boot/dts/exynos/exynos5433.dtsi | 8 ++++---- > arch/arm64/boot/dts/exynos/exynos7.dtsi | 4 ++-- > 2 files changed, 6 insertions(+), 6 deletions(-) > > diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi > index 1962b8074349..0ba5df825eff 100644 > --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi > +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi > @@ -994,7 +994,7 @@ > reg = <0x145f0000 0x1038>; > }; > > - gsc_0: video-scaler@13C00000 { > + gsc_0: video-scaler@13c00000 { > compatible = "samsung,exynos5433-gsc"; > reg = <0x13c00000 0x1000>; > interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>; > @@ -1008,7 +1008,7 @@ > power-domains = <&pd_gscl>; > }; > > - gsc_1: video-scaler@13C10000 { > + gsc_1: video-scaler@13c10000 { > compatible = "samsung,exynos5433-gsc"; > reg = <0x13c10000 0x1000>; > interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>; > @@ -1022,7 +1022,7 @@ > power-domains = <&pd_gscl>; > }; > > - gsc_2: video-scaler@13C20000 { > + gsc_2: video-scaler@13c20000 { > compatible = "samsung,exynos5433-gsc"; > reg = <0x13c20000 0x1000>; > interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; > @@ -1049,7 +1049,7 @@ > power-domains = <&pd_mscl>; > }; > > - mfc: codec@152E0000 { > + mfc: codec@152e0000 { > compatible = "samsung,exynos5433-mfc"; > reg = <0x152E0000 0x10000>; > interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; > diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi > index 9a3fbed1765a..3504837b1d43 100644 > --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi > +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi > @@ -103,7 +103,7 @@ > #size-cells = <1>; > ranges; > > - pdma0: pdma@10E10000 { > + pdma0: pdma@10e10000 { > compatible = "arm,pl330", "arm,primecell"; > reg = <0x10E10000 0x1000>; > interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; > @@ -114,7 +114,7 @@ > #dma-requests = <32>; > }; > > - pdma1: pdma@10EB0000 { > + pdma1: pdma@10eb0000 { > compatible = "arm,pl330", "arm,primecell"; > reg = <0x10EB0000 0x1000>; > interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; > Looks good to me. Reviewed-by: Chanwoo Choi <cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org> -- Best Regards, Chanwoo Choi Samsung Electronics -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 1/2] arm64: dts: exynos: Use lower case hex addresses in node unit addresses @ 2017-12-21 0:51 ` Chanwoo Choi 0 siblings, 0 replies; 10+ messages in thread From: Chanwoo Choi @ 2017-12-21 0:51 UTC (permalink / raw) To: Krzysztof Kozlowski, Rob Herring, Mark Rutland, Catalin Marinas, Will Deacon, Kukjin Kim, Marek Szyprowski, Andrzej Hajda, Alim Akhtar, devicetree, linux-arm-kernel, linux-samsung-soc, linux-kernel Dear Krzysztof, On 2017년 12월 21일 04:27, Krzysztof Kozlowski wrote: > Convert all hex addresses in node unit addresses to lower case to > fix warnings like: > arch/arm64/boot/dts/exynos/exynos5433-tm2e.dtb: Warning (simple_bus_reg): > Node /soc/video-scaler@13C00000 simple-bus unit address format error, expected "13c00000" > > Conversion was done using sed: > $ sed -e 's/@\([a-zA-Z0-9_-]*\) {/@\L\1 {/' -i arch/arm64/boot/dts/exynos/*.dts* > > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> > --- > arch/arm64/boot/dts/exynos/exynos5433.dtsi | 8 ++++---- > arch/arm64/boot/dts/exynos/exynos7.dtsi | 4 ++-- > 2 files changed, 6 insertions(+), 6 deletions(-) > > diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi > index 1962b8074349..0ba5df825eff 100644 > --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi > +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi > @@ -994,7 +994,7 @@ > reg = <0x145f0000 0x1038>; > }; > > - gsc_0: video-scaler@13C00000 { > + gsc_0: video-scaler@13c00000 { > compatible = "samsung,exynos5433-gsc"; > reg = <0x13c00000 0x1000>; > interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>; > @@ -1008,7 +1008,7 @@ > power-domains = <&pd_gscl>; > }; > > - gsc_1: video-scaler@13C10000 { > + gsc_1: video-scaler@13c10000 { > compatible = "samsung,exynos5433-gsc"; > reg = <0x13c10000 0x1000>; > interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>; > @@ -1022,7 +1022,7 @@ > power-domains = <&pd_gscl>; > }; > > - gsc_2: video-scaler@13C20000 { > + gsc_2: video-scaler@13c20000 { > compatible = "samsung,exynos5433-gsc"; > reg = <0x13c20000 0x1000>; > interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; > @@ -1049,7 +1049,7 @@ > power-domains = <&pd_mscl>; > }; > > - mfc: codec@152E0000 { > + mfc: codec@152e0000 { > compatible = "samsung,exynos5433-mfc"; > reg = <0x152E0000 0x10000>; > interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; > diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi > index 9a3fbed1765a..3504837b1d43 100644 > --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi > +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi > @@ -103,7 +103,7 @@ > #size-cells = <1>; > ranges; > > - pdma0: pdma@10E10000 { > + pdma0: pdma@10e10000 { > compatible = "arm,pl330", "arm,primecell"; > reg = <0x10E10000 0x1000>; > interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; > @@ -114,7 +114,7 @@ > #dma-requests = <32>; > }; > > - pdma1: pdma@10EB0000 { > + pdma1: pdma@10eb0000 { > compatible = "arm,pl330", "arm,primecell"; > reg = <0x10EB0000 0x1000>; > interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; > Looks good to me. Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> -- Best Regards, Chanwoo Choi Samsung Electronics ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 1/2] arm64: dts: exynos: Use lower case hex addresses in node unit addresses @ 2017-12-21 0:51 ` Chanwoo Choi 0 siblings, 0 replies; 10+ messages in thread From: Chanwoo Choi @ 2017-12-21 0:51 UTC (permalink / raw) To: linux-arm-kernel Dear Krzysztof, On 2017? 12? 21? 04:27, Krzysztof Kozlowski wrote: > Convert all hex addresses in node unit addresses to lower case to > fix warnings like: > arch/arm64/boot/dts/exynos/exynos5433-tm2e.dtb: Warning (simple_bus_reg): > Node /soc/video-scaler at 13C00000 simple-bus unit address format error, expected "13c00000" > > Conversion was done using sed: > $ sed -e 's/@\([a-zA-Z0-9_-]*\) {/@\L\1 {/' -i arch/arm64/boot/dts/exynos/*.dts* > > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> > --- > arch/arm64/boot/dts/exynos/exynos5433.dtsi | 8 ++++---- > arch/arm64/boot/dts/exynos/exynos7.dtsi | 4 ++-- > 2 files changed, 6 insertions(+), 6 deletions(-) > > diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi > index 1962b8074349..0ba5df825eff 100644 > --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi > +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi > @@ -994,7 +994,7 @@ > reg = <0x145f0000 0x1038>; > }; > > - gsc_0: video-scaler at 13C00000 { > + gsc_0: video-scaler at 13c00000 { > compatible = "samsung,exynos5433-gsc"; > reg = <0x13c00000 0x1000>; > interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>; > @@ -1008,7 +1008,7 @@ > power-domains = <&pd_gscl>; > }; > > - gsc_1: video-scaler at 13C10000 { > + gsc_1: video-scaler at 13c10000 { > compatible = "samsung,exynos5433-gsc"; > reg = <0x13c10000 0x1000>; > interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>; > @@ -1022,7 +1022,7 @@ > power-domains = <&pd_gscl>; > }; > > - gsc_2: video-scaler at 13C20000 { > + gsc_2: video-scaler at 13c20000 { > compatible = "samsung,exynos5433-gsc"; > reg = <0x13c20000 0x1000>; > interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; > @@ -1049,7 +1049,7 @@ > power-domains = <&pd_mscl>; > }; > > - mfc: codec at 152E0000 { > + mfc: codec at 152e0000 { > compatible = "samsung,exynos5433-mfc"; > reg = <0x152E0000 0x10000>; > interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; > diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi > index 9a3fbed1765a..3504837b1d43 100644 > --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi > +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi > @@ -103,7 +103,7 @@ > #size-cells = <1>; > ranges; > > - pdma0: pdma at 10E10000 { > + pdma0: pdma at 10e10000 { > compatible = "arm,pl330", "arm,primecell"; > reg = <0x10E10000 0x1000>; > interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; > @@ -114,7 +114,7 @@ > #dma-requests = <32>; > }; > > - pdma1: pdma at 10EB0000 { > + pdma1: pdma at 10eb0000 { > compatible = "arm,pl330", "arm,primecell"; > reg = <0x10EB0000 0x1000>; > interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; > Looks good to me. Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> -- Best Regards, Chanwoo Choi Samsung Electronics ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2017-12-21 0:54 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <CGME20171220192737epcas4p17c4e71c11e5864fd59f06396c0867a3a@epcas4p1.samsung.com>
2017-12-20 19:27 ` [PATCH 1/2] arm64: dts: exynos: Use lower case hex addresses in node unit addresses Krzysztof Kozlowski
2017-12-20 19:27 ` Krzysztof Kozlowski
2017-12-20 19:27 ` [PATCH 2/2] arm64: dts: exynos: Fix typo in MSCL clock controller unit address Krzysztof Kozlowski
2017-12-20 19:27 ` Krzysztof Kozlowski
[not found] ` <20171220192702.32515-2-krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2017-12-21 0:54 ` Chanwoo Choi
2017-12-21 0:54 ` Chanwoo Choi
2017-12-21 0:54 ` Chanwoo Choi
[not found] ` <20171220192702.32515-1-krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2017-12-21 0:51 ` [PATCH 1/2] arm64: dts: exynos: Use lower case hex addresses in node unit addresses Chanwoo Choi
2017-12-21 0:51 ` Chanwoo Choi
2017-12-21 0:51 ` Chanwoo Choi
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.