* [PATCH] brcmfmac: Add support for bcm43364 wireless chipset
@ 2018-05-04 6:48 ` Sean Lanigan
0 siblings, 0 replies; 10+ messages in thread
From: Sean Lanigan @ 2018-05-04 6:48 UTC (permalink / raw)
To: arend.vanspriel-dY08KVG/lbpWk0Htik3J/w
Cc: franky.lin-dY08KVG/lbpWk0Htik3J/w,
hante.meuleman-dY08KVG/lbpWk0Htik3J/w,
chi-hsien.lin-+wT8y+m8/X5BDgjK7y7TUQ,
wright.feng-+wT8y+m8/X5BDgjK7y7TUQ,
ulf.hansson-QSEj5FYQhm4dnm+yROfE0A, ian-zdned+2MO1+9FHfhHBbuYA,
linux-wireless-u79uwXL29TY76Z2rM5mHXA,
brcm80211-dev-list-+wT8y+m8/X5BDgjK7y7TUQ,
linux-mmc-u79uwXL29TY76Z2rM5mHXA, Sean Lanigan
Add support for the BCM43364 chipset via an SDIO interface, as used in
e.g. the Murata 1FX module.
The BCM43364 uses the same firmware as the BCM43430 (which is already
included), the only difference is the omission of Bluetooth.
However, the SDIO_ID for the BCM43364 is 02D0:A9A4, giving it a MODALIAS
of sdio:c00v02D0dA9A4, which doesn't get recognised and hence doesn't
load the brcmfmac module. Adding the 'A9A4' ID in the appropriate place
triggers the brcmfmac driver to load, and then correctly use the
firmware file 'brcmfmac43430-sdio.bin'.
Signed-off-by: Sean Lanigan <sean-k1Xf6wIwYfsQrrorzV6ljw@public.gmane.org>
---
drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c | 1 +
include/linux/mmc/sdio_ids.h | 1 +
2 files changed, 2 insertions(+)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
index 0b68240..4648a3d 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
@@ -963,6 +963,7 @@ static const struct sdio_device_id brcmf_sdmmc_ids[] = {
BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_43340),
BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_43341),
BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_43362),
+ BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_43364),
BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_4335_4339),
BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_4339),
BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_43430),
diff --git a/include/linux/mmc/sdio_ids.h b/include/linux/mmc/sdio_ids.h
index cdd66a5..0a7abe8 100644
--- a/include/linux/mmc/sdio_ids.h
+++ b/include/linux/mmc/sdio_ids.h
@@ -35,6 +35,7 @@
#define SDIO_DEVICE_ID_BROADCOM_4335_4339 0x4335
#define SDIO_DEVICE_ID_BROADCOM_4339 0x4339
#define SDIO_DEVICE_ID_BROADCOM_43362 0xa962
+#define SDIO_DEVICE_ID_BROADCOM_43364 0xa9a4
#define SDIO_DEVICE_ID_BROADCOM_43430 0xa9a6
#define SDIO_DEVICE_ID_BROADCOM_4345 0x4345
#define SDIO_DEVICE_ID_BROADCOM_43455 0xa9bf
--
2.7.4
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH] brcmfmac: Add support for bcm43364 wireless chipset
@ 2018-05-04 6:48 ` Sean Lanigan
0 siblings, 0 replies; 10+ messages in thread
From: Sean Lanigan @ 2018-05-04 6:48 UTC (permalink / raw)
To: arend.vanspriel
Cc: franky.lin, hante.meuleman, chi-hsien.lin, wright.feng,
ulf.hansson, ian, linux-wireless, brcm80211-dev-list, linux-mmc,
Sean Lanigan
Add support for the BCM43364 chipset via an SDIO interface, as used in
e.g. the Murata 1FX module.
The BCM43364 uses the same firmware as the BCM43430 (which is already
included), the only difference is the omission of Bluetooth.
However, the SDIO_ID for the BCM43364 is 02D0:A9A4, giving it a MODALIAS
of sdio:c00v02D0dA9A4, which doesn't get recognised and hence doesn't
load the brcmfmac module. Adding the 'A9A4' ID in the appropriate place
triggers the brcmfmac driver to load, and then correctly use the
firmware file 'brcmfmac43430-sdio.bin'.
Signed-off-by: Sean Lanigan <sean@lano.id.au>
---
drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c | 1 +
include/linux/mmc/sdio_ids.h | 1 +
2 files changed, 2 insertions(+)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
index 0b68240..4648a3d 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
@@ -963,6 +963,7 @@ static const struct sdio_device_id brcmf_sdmmc_ids[] = {
BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_43340),
BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_43341),
BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_43362),
+ BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_43364),
BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_4335_4339),
BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_4339),
BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_43430),
diff --git a/include/linux/mmc/sdio_ids.h b/include/linux/mmc/sdio_ids.h
index cdd66a5..0a7abe8 100644
--- a/include/linux/mmc/sdio_ids.h
+++ b/include/linux/mmc/sdio_ids.h
@@ -35,6 +35,7 @@
#define SDIO_DEVICE_ID_BROADCOM_4335_4339 0x4335
#define SDIO_DEVICE_ID_BROADCOM_4339 0x4339
#define SDIO_DEVICE_ID_BROADCOM_43362 0xa962
+#define SDIO_DEVICE_ID_BROADCOM_43364 0xa9a4
#define SDIO_DEVICE_ID_BROADCOM_43430 0xa9a6
#define SDIO_DEVICE_ID_BROADCOM_4345 0x4345
#define SDIO_DEVICE_ID_BROADCOM_43455 0xa9bf
--
2.7.4
^ permalink raw reply related [flat|nested] 10+ messages in thread[parent not found: <1525416503-832-1-git-send-email-sean-k1Xf6wIwYfsQrrorzV6ljw@public.gmane.org>]
* Re: [PATCH] brcmfmac: Add support for bcm43364 wireless chipset
2018-05-04 6:48 ` Sean Lanigan
@ 2018-05-08 7:58 ` Ulf Hansson
-1 siblings, 0 replies; 10+ messages in thread
From: Ulf Hansson @ 2018-05-08 7:58 UTC (permalink / raw)
To: Sean Lanigan, Arend van Spriel
Cc: Franky Lin, Hante Meuleman, Chi-Hsien Lin, Wright Feng,
Ian Molton, linux-wireless-u79uwXL29TY76Z2rM5mHXA,
brcm80211-dev-list-+wT8y+m8/X5BDgjK7y7TUQ,
linux-mmc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
On 4 May 2018 at 08:48, Sean Lanigan <sean-k1Xf6wIwYfsQrrorzV6ljw@public.gmane.org> wrote:
> Add support for the BCM43364 chipset via an SDIO interface, as used in
> e.g. the Murata 1FX module.
>
> The BCM43364 uses the same firmware as the BCM43430 (which is already
> included), the only difference is the omission of Bluetooth.
>
> However, the SDIO_ID for the BCM43364 is 02D0:A9A4, giving it a MODALIAS
> of sdio:c00v02D0dA9A4, which doesn't get recognised and hence doesn't
> load the brcmfmac module. Adding the 'A9A4' ID in the appropriate place
> triggers the brcmfmac driver to load, and then correctly use the
> firmware file 'brcmfmac43430-sdio.bin'.
>
>
> Signed-off-by: Sean Lanigan <sean-k1Xf6wIwYfsQrrorzV6ljw@public.gmane.org>
Acked-by: Ulf Hansson <ulf.hansson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Arend, I assume you want to pick this up? If not, just tell and I can do it.
Kind regards
Uffe
> ---
> drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c | 1 +
> include/linux/mmc/sdio_ids.h | 1 +
> 2 files changed, 2 insertions(+)
>
> diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
> index 0b68240..4648a3d 100644
> --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
> +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
> @@ -963,6 +963,7 @@ static const struct sdio_device_id brcmf_sdmmc_ids[] = {
> BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_43340),
> BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_43341),
> BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_43362),
> + BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_43364),
> BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_4335_4339),
> BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_4339),
> BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_43430),
> diff --git a/include/linux/mmc/sdio_ids.h b/include/linux/mmc/sdio_ids.h
> index cdd66a5..0a7abe8 100644
> --- a/include/linux/mmc/sdio_ids.h
> +++ b/include/linux/mmc/sdio_ids.h
> @@ -35,6 +35,7 @@
> #define SDIO_DEVICE_ID_BROADCOM_4335_4339 0x4335
> #define SDIO_DEVICE_ID_BROADCOM_4339 0x4339
> #define SDIO_DEVICE_ID_BROADCOM_43362 0xa962
> +#define SDIO_DEVICE_ID_BROADCOM_43364 0xa9a4
> #define SDIO_DEVICE_ID_BROADCOM_43430 0xa9a6
> #define SDIO_DEVICE_ID_BROADCOM_4345 0x4345
> #define SDIO_DEVICE_ID_BROADCOM_43455 0xa9bf
> --
> 2.7.4
>
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: [PATCH] brcmfmac: Add support for bcm43364 wireless chipset
@ 2018-05-08 7:58 ` Ulf Hansson
0 siblings, 0 replies; 10+ messages in thread
From: Ulf Hansson @ 2018-05-08 7:58 UTC (permalink / raw)
To: Sean Lanigan, Arend van Spriel
Cc: Franky Lin, Hante Meuleman, Chi-Hsien Lin, Wright Feng,
Ian Molton, linux-wireless, brcm80211-dev-list,
linux-mmc@vger.kernel.org
On 4 May 2018 at 08:48, Sean Lanigan <sean@lano.id.au> wrote:
> Add support for the BCM43364 chipset via an SDIO interface, as used in
> e.g. the Murata 1FX module.
>
> The BCM43364 uses the same firmware as the BCM43430 (which is already
> included), the only difference is the omission of Bluetooth.
>
> However, the SDIO_ID for the BCM43364 is 02D0:A9A4, giving it a MODALIAS
> of sdio:c00v02D0dA9A4, which doesn't get recognised and hence doesn't
> load the brcmfmac module. Adding the 'A9A4' ID in the appropriate place
> triggers the brcmfmac driver to load, and then correctly use the
> firmware file 'brcmfmac43430-sdio.bin'.
>
>
> Signed-off-by: Sean Lanigan <sean@lano.id.au>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Arend, I assume you want to pick this up? If not, just tell and I can do it.
Kind regards
Uffe
> ---
> drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c | 1 +
> include/linux/mmc/sdio_ids.h | 1 +
> 2 files changed, 2 insertions(+)
>
> diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
> index 0b68240..4648a3d 100644
> --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
> +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
> @@ -963,6 +963,7 @@ static const struct sdio_device_id brcmf_sdmmc_ids[] = {
> BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_43340),
> BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_43341),
> BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_43362),
> + BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_43364),
> BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_4335_4339),
> BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_4339),
> BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_43430),
> diff --git a/include/linux/mmc/sdio_ids.h b/include/linux/mmc/sdio_ids.h
> index cdd66a5..0a7abe8 100644
> --- a/include/linux/mmc/sdio_ids.h
> +++ b/include/linux/mmc/sdio_ids.h
> @@ -35,6 +35,7 @@
> #define SDIO_DEVICE_ID_BROADCOM_4335_4339 0x4335
> #define SDIO_DEVICE_ID_BROADCOM_4339 0x4339
> #define SDIO_DEVICE_ID_BROADCOM_43362 0xa962
> +#define SDIO_DEVICE_ID_BROADCOM_43364 0xa9a4
> #define SDIO_DEVICE_ID_BROADCOM_43430 0xa9a6
> #define SDIO_DEVICE_ID_BROADCOM_4345 0x4345
> #define SDIO_DEVICE_ID_BROADCOM_43455 0xa9bf
> --
> 2.7.4
>
^ permalink raw reply [flat|nested] 10+ messages in thread[parent not found: <CAPDyKFr62-+EF_GRbUSa=VOQfYa3c3HHZCR_LsN67k1yVkNNFw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>]
* Re: [PATCH] brcmfmac: Add support for bcm43364 wireless chipset
2018-05-08 7:58 ` Ulf Hansson
@ 2018-05-08 12:11 ` Arend van Spriel
-1 siblings, 0 replies; 10+ messages in thread
From: Arend van Spriel @ 2018-05-08 12:11 UTC (permalink / raw)
To: Ulf Hansson, Sean Lanigan
Cc: Franky Lin, Hante Meuleman, Chi-Hsien Lin, Wright Feng,
Ian Molton, linux-wireless-u79uwXL29TY76Z2rM5mHXA,
brcm80211-dev-list-+wT8y+m8/X5BDgjK7y7TUQ,
linux-mmc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Kalle Valo
+ Kalle (explicitly)
On 5/8/2018 9:58 AM, Ulf Hansson wrote:
> On 4 May 2018 at 08:48, Sean Lanigan <sean-k1Xf6wIwYfsQrrorzV6ljw@public.gmane.org> wrote:
>> Add support for the BCM43364 chipset via an SDIO interface, as used in
>> e.g. the Murata 1FX module.
>>
>> The BCM43364 uses the same firmware as the BCM43430 (which is already
>> included), the only difference is the omission of Bluetooth.
>>
>> However, the SDIO_ID for the BCM43364 is 02D0:A9A4, giving it a MODALIAS
>> of sdio:c00v02D0dA9A4, which doesn't get recognised and hence doesn't
>> load the brcmfmac module. Adding the 'A9A4' ID in the appropriate place
>> triggers the brcmfmac driver to load, and then correctly use the
>> firmware file 'brcmfmac43430-sdio.bin'.
>>
>>
>> Signed-off-by: Sean Lanigan <sean-k1Xf6wIwYfsQrrorzV6ljw@public.gmane.org>
>
> Acked-by: Ulf Hansson <ulf.hansson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
>
> Arend, I assume you want to pick this up? If not, just tell and I can do it.
Not necessarily. I let Kalle do the leg work ;-) Given the change I do
not expect any conflict so we can go either way with a slight preference
for wl-drivers-next. Kalle?
Regards,
Arend
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] brcmfmac: Add support for bcm43364 wireless chipset
@ 2018-05-08 12:11 ` Arend van Spriel
0 siblings, 0 replies; 10+ messages in thread
From: Arend van Spriel @ 2018-05-08 12:11 UTC (permalink / raw)
To: Ulf Hansson, Sean Lanigan
Cc: Franky Lin, Hante Meuleman, Chi-Hsien Lin, Wright Feng,
Ian Molton, linux-wireless, brcm80211-dev-list,
linux-mmc@vger.kernel.org, Kalle Valo
+ Kalle (explicitly)
On 5/8/2018 9:58 AM, Ulf Hansson wrote:
> On 4 May 2018 at 08:48, Sean Lanigan <sean@lano.id.au> wrote:
>> Add support for the BCM43364 chipset via an SDIO interface, as used in
>> e.g. the Murata 1FX module.
>>
>> The BCM43364 uses the same firmware as the BCM43430 (which is already
>> included), the only difference is the omission of Bluetooth.
>>
>> However, the SDIO_ID for the BCM43364 is 02D0:A9A4, giving it a MODALIAS
>> of sdio:c00v02D0dA9A4, which doesn't get recognised and hence doesn't
>> load the brcmfmac module. Adding the 'A9A4' ID in the appropriate place
>> triggers the brcmfmac driver to load, and then correctly use the
>> firmware file 'brcmfmac43430-sdio.bin'.
>>
>>
>> Signed-off-by: Sean Lanigan <sean@lano.id.au>
>
> Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
>
> Arend, I assume you want to pick this up? If not, just tell and I can do it.
Not necessarily. I let Kalle do the leg work ;-) Given the change I do
not expect any conflict so we can go either way with a slight preference
for wl-drivers-next. Kalle?
Regards,
Arend
^ permalink raw reply [flat|nested] 10+ messages in thread
[parent not found: <5AF193FA.7000700-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>]
* Re: [PATCH] brcmfmac: Add support for bcm43364 wireless chipset
2018-05-08 12:11 ` Arend van Spriel
@ 2018-05-08 12:51 ` Kalle Valo
-1 siblings, 0 replies; 10+ messages in thread
From: Kalle Valo @ 2018-05-08 12:51 UTC (permalink / raw)
To: Arend van Spriel
Cc: Ulf Hansson, Sean Lanigan, Franky Lin, Hante Meuleman,
Chi-Hsien Lin, Wright Feng, Ian Molton,
linux-wireless-u79uwXL29TY76Z2rM5mHXA,
brcm80211-dev-list-+wT8y+m8/X5BDgjK7y7TUQ,
linux-mmc@vger.kernel.org
Arend van Spriel <arend.vanspriel-dY08KVG/lbpWk0Htik3J/w@public.gmane.org> writes:
> + Kalle (explicitly)
>
> On 5/8/2018 9:58 AM, Ulf Hansson wrote:
>> On 4 May 2018 at 08:48, Sean Lanigan <sean-k1Xf6wIwYfsQrrorzV6ljw@public.gmane.org> wrote:
>>> Add support for the BCM43364 chipset via an SDIO interface, as used in
>>> e.g. the Murata 1FX module.
>>>
>>> The BCM43364 uses the same firmware as the BCM43430 (which is already
>>> included), the only difference is the omission of Bluetooth.
>>>
>>> However, the SDIO_ID for the BCM43364 is 02D0:A9A4, giving it a MODALIAS
>>> of sdio:c00v02D0dA9A4, which doesn't get recognised and hence doesn't
>>> load the brcmfmac module. Adding the 'A9A4' ID in the appropriate place
>>> triggers the brcmfmac driver to load, and then correctly use the
>>> firmware file 'brcmfmac43430-sdio.bin'.
>>>
>>>
>>> Signed-off-by: Sean Lanigan <sean-k1Xf6wIwYfsQrrorzV6ljw@public.gmane.org>
>>
>> Acked-by: Ulf Hansson <ulf.hansson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
>>
>> Arend, I assume you want to pick this up? If not, just tell and I can do it.
>
> Not necessarily. I let Kalle do the leg work ;-) Given the change I do
> not expect any conflict so we can go either way with a slight
> preference for wl-drivers-next. Kalle?
Yeah, I would like to take this to wireless-drivers-next. Less conflicts
that way.
--
Kalle Valo
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] brcmfmac: Add support for bcm43364 wireless chipset
@ 2018-05-08 12:51 ` Kalle Valo
0 siblings, 0 replies; 10+ messages in thread
From: Kalle Valo @ 2018-05-08 12:51 UTC (permalink / raw)
To: Arend van Spriel
Cc: Ulf Hansson, Sean Lanigan, Franky Lin, Hante Meuleman,
Chi-Hsien Lin, Wright Feng, Ian Molton, linux-wireless,
brcm80211-dev-list, linux-mmc@vger.kernel.org
Arend van Spriel <arend.vanspriel@broadcom.com> writes:
> + Kalle (explicitly)
>
> On 5/8/2018 9:58 AM, Ulf Hansson wrote:
>> On 4 May 2018 at 08:48, Sean Lanigan <sean@lano.id.au> wrote:
>>> Add support for the BCM43364 chipset via an SDIO interface, as used in
>>> e.g. the Murata 1FX module.
>>>
>>> The BCM43364 uses the same firmware as the BCM43430 (which is already
>>> included), the only difference is the omission of Bluetooth.
>>>
>>> However, the SDIO_ID for the BCM43364 is 02D0:A9A4, giving it a MODALIAS
>>> of sdio:c00v02D0dA9A4, which doesn't get recognised and hence doesn't
>>> load the brcmfmac module. Adding the 'A9A4' ID in the appropriate place
>>> triggers the brcmfmac driver to load, and then correctly use the
>>> firmware file 'brcmfmac43430-sdio.bin'.
>>>
>>>
>>> Signed-off-by: Sean Lanigan <sean@lano.id.au>
>>
>> Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
>>
>> Arend, I assume you want to pick this up? If not, just tell and I can do it.
>
> Not necessarily. I let Kalle do the leg work ;-) Given the change I do
> not expect any conflict so we can go either way with a slight
> preference for wl-drivers-next. Kalle?
Yeah, I would like to take this to wireless-drivers-next. Less conflicts
that way.
--
Kalle Valo
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: brcmfmac: Add support for bcm43364 wireless chipset
2018-05-04 6:48 ` Sean Lanigan
@ 2018-05-09 10:25 ` Kalle Valo
-1 siblings, 0 replies; 10+ messages in thread
From: Kalle Valo @ 2018-05-09 10:25 UTC (permalink / raw)
Cc: arend.vanspriel-dY08KVG/lbpWk0Htik3J/w,
franky.lin-dY08KVG/lbpWk0Htik3J/w,
hante.meuleman-dY08KVG/lbpWk0Htik3J/w,
chi-hsien.lin-+wT8y+m8/X5BDgjK7y7TUQ,
wright.feng-+wT8y+m8/X5BDgjK7y7TUQ,
ulf.hansson-QSEj5FYQhm4dnm+yROfE0A, ian-zdned+2MO1+9FHfhHBbuYA,
linux-wireless-u79uwXL29TY76Z2rM5mHXA,
brcm80211-dev-list-+wT8y+m8/X5BDgjK7y7TUQ,
linux-mmc-u79uwXL29TY76Z2rM5mHXA, Sean Lanigan
Sean Lanigan <sean-k1Xf6wIwYfsQrrorzV6ljw@public.gmane.org> wrote:
> Add support for the BCM43364 chipset via an SDIO interface, as used in
> e.g. the Murata 1FX module.
>
> The BCM43364 uses the same firmware as the BCM43430 (which is already
> included), the only difference is the omission of Bluetooth.
>
> However, the SDIO_ID for the BCM43364 is 02D0:A9A4, giving it a MODALIAS
> of sdio:c00v02D0dA9A4, which doesn't get recognised and hence doesn't
> load the brcmfmac module. Adding the 'A9A4' ID in the appropriate place
> triggers the brcmfmac driver to load, and then correctly use the
> firmware file 'brcmfmac43430-sdio.bin'.
>
>
> Signed-off-by: Sean Lanigan <sean-k1Xf6wIwYfsQrrorzV6ljw@public.gmane.org>
> Acked-by: Ulf Hansson <ulf.hansson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Patch applied to wireless-drivers-next.git, thanks.
9c4a121e8263 brcmfmac: Add support for bcm43364 wireless chipset
--
https://patchwork.kernel.org/patch/10380047/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: brcmfmac: Add support for bcm43364 wireless chipset
@ 2018-05-09 10:25 ` Kalle Valo
0 siblings, 0 replies; 10+ messages in thread
From: Kalle Valo @ 2018-05-09 10:25 UTC (permalink / raw)
To: Sean Lanigan
Cc: arend.vanspriel, franky.lin, hante.meuleman, chi-hsien.lin,
wright.feng, ulf.hansson, ian, linux-wireless, brcm80211-dev-list,
linux-mmc, Sean Lanigan
Sean Lanigan <sean@lano.id.au> wrote:
> Add support for the BCM43364 chipset via an SDIO interface, as used in
> e.g. the Murata 1FX module.
>
> The BCM43364 uses the same firmware as the BCM43430 (which is already
> included), the only difference is the omission of Bluetooth.
>
> However, the SDIO_ID for the BCM43364 is 02D0:A9A4, giving it a MODALIAS
> of sdio:c00v02D0dA9A4, which doesn't get recognised and hence doesn't
> load the brcmfmac module. Adding the 'A9A4' ID in the appropriate place
> triggers the brcmfmac driver to load, and then correctly use the
> firmware file 'brcmfmac43430-sdio.bin'.
>
>
> Signed-off-by: Sean Lanigan <sean@lano.id.au>
> Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Patch applied to wireless-drivers-next.git, thanks.
9c4a121e8263 brcmfmac: Add support for bcm43364 wireless chipset
--
https://patchwork.kernel.org/patch/10380047/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2018-05-09 10:25 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-05-04 6:48 [PATCH] brcmfmac: Add support for bcm43364 wireless chipset Sean Lanigan
2018-05-04 6:48 ` Sean Lanigan
[not found] ` <1525416503-832-1-git-send-email-sean-k1Xf6wIwYfsQrrorzV6ljw@public.gmane.org>
2018-05-08 7:58 ` Ulf Hansson
2018-05-08 7:58 ` Ulf Hansson
[not found] ` <CAPDyKFr62-+EF_GRbUSa=VOQfYa3c3HHZCR_LsN67k1yVkNNFw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2018-05-08 12:11 ` Arend van Spriel
2018-05-08 12:11 ` Arend van Spriel
[not found] ` <5AF193FA.7000700-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2018-05-08 12:51 ` Kalle Valo
2018-05-08 12:51 ` Kalle Valo
2018-05-09 10:25 ` Kalle Valo
2018-05-09 10:25 ` Kalle Valo
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.