Re: [PATCH v4 3/6] i3c: mipi-i3c-hci: Add a quirk to set PIO mode

[Jarkko Nikula <jarkko.nikula@linux.intel.com>]

On 8/21/24 4:35 PM, Shyam Sundar S K wrote:
> The AMD HCI controller currently only supports PIO mode but exposes DMA
> rings to the OS, which leads to the controller being configured in DMA
> mode. To address this, add a quirk to avoid configuring the controller in
> DMA mode and default to PIO mode.
> 
> Additionally, introduce a generic quirk infrastructure to the mipi-i3c-hci
> driver to facilitate seamless future quirk additions.
> 
> Co-developed-by: Krishnamoorthi M <krishnamoorthi.m@amd.com>
> Signed-off-by: Krishnamoorthi M <krishnamoorthi.m@amd.com>
> Co-developed-by: Guruvendra Punugupati <Guruvendra.Punugupati@amd.com>
> Signed-off-by: Guruvendra Punugupati <Guruvendra.Punugupati@amd.com>
> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
> ---
>   drivers/i3c/master/mipi-i3c-hci/core.c | 9 ++++++++-
>   drivers/i3c/master/mipi-i3c-hci/hci.h  | 1 +
>   2 files changed, 9 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/i3c/master/mipi-i3c-hci/core.c b/drivers/i3c/master/mipi-i3c-hci/core.c
> index d1952a5619d4..3aa4aa9deb56 100644
> --- a/drivers/i3c/master/mipi-i3c-hci/core.c
> +++ b/drivers/i3c/master/mipi-i3c-hci/core.c
> @@ -754,6 +754,11 @@ static int i3c_hci_init(struct i3c_hci *hci)
>   		return -EINVAL;
>   	}
>   
> +	/* Quirk for HCI_QUIRK_PIO_MODE on AMD platforms */
> +	regval = reg_read(HCI_VERSION);
> +	if (hci->quirks & HCI_QUIRK_PIO_MODE)
> +		hci->RHS_regs = NULL;
> +
>   	/* Try activating DMA operations first */
>   	if (hci->RHS_regs) {
>   		reg_clear(HC_CONTROL, HC_CONTROL_PIO_MODE);

This looks otherwise ok to me but with "regval = reg_read(HCI_VERSION);" 
removed. I commented that in the patch 2/6.

-- 
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c