From: "Jernej Škrabec" <jernej.skrabec@gmail.com>
To: Vasily Khoruzhick <anarsoul@gmail.com>,
Yangtao Li <tiny.windzz@gmail.com>, Chen-Yu Tsai <wens@csie.org>,
Samuel Holland <samuel@sholland.org>,
Andre Przywara <andre.przywara@arm.com>
Cc: "Rafael J . Wysocki" <rafael@kernel.org>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Zhang Rui <rui.zhang@intel.com>,
Lukasz Luba <lukasz.luba@arm.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Martin Botka <martin.botka@somainline.org>,
Maksim Kiselev <bigunclemax@gmail.com>,
Bob McChesney <bob@electricworry.net>,
linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-sunxi@lists.linux.dev
Subject: Re: [PATCH v5 7/7] arm64: dts: allwinner: h616: Add thermal sensor and zones
Date: Thu, 22 Feb 2024 19:27:49 +0100 [thread overview]
Message-ID: <6017340.lOV4Wx5bFT@jernej-laptop> (raw)
In-Reply-To: <20240219153639.179814-8-andre.przywara@arm.com>
Dne ponedeljek, 19. februar 2024 ob 16:36:39 CET je Andre Przywara napisal(a):
> From: Martin Botka <martin.botka@somainline.org>
>
> There are four thermal sensors:
> - CPU
> - GPU
> - VE
> - DRAM
>
> Add the thermal sensor configuration and the thermal zones.
>
> Signed-off-by: Martin Botka <martin.botka@somainline.org>
> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Best regards,
Jernej
> ---
> .../arm64/boot/dts/allwinner/sun50i-h616.dtsi | 88 +++++++++++++++++++
> 1 file changed, 88 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
> index 12ffabc79bcde..7c7d7c285505c 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
> @@ -9,6 +9,7 @@
> #include <dt-bindings/clock/sun6i-rtc.h>
> #include <dt-bindings/reset/sun50i-h616-ccu.h>
> #include <dt-bindings/reset/sun50i-h6-r-ccu.h>
> +#include <dt-bindings/thermal/thermal.h>
>
> / {
> interrupt-parent = <&gic>;
> @@ -138,6 +139,10 @@ sid: efuse@3006000 {
> reg = <0x03006000 0x1000>;
> #address-cells = <1>;
> #size-cells = <1>;
> +
> + ths_calibration: thermal-sensor-calibration@14 {
> + reg = <0x14 0x8>;
> + };
> };
>
> watchdog: watchdog@30090a0 {
> @@ -517,6 +522,19 @@ mdio0: mdio {
> };
> };
>
> + ths: thermal-sensor@5070400 {
> + compatible = "allwinner,sun50i-h616-ths";
> + reg = <0x05070400 0x400>;
> + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ccu CLK_BUS_THS>;
> + clock-names = "bus";
> + resets = <&ccu RST_BUS_THS>;
> + nvmem-cells = <&ths_calibration>;
> + nvmem-cell-names = "calibration";
> + allwinner,sram = <&syscon>;
> + #thermal-sensor-cells = <1>;
> + };
> +
> usbotg: usb@5100000 {
> compatible = "allwinner,sun50i-h616-musb",
> "allwinner,sun8i-h3-musb";
> @@ -761,4 +779,74 @@ r_rsb: rsb@7083000 {
> #size-cells = <0>;
> };
> };
> +
> + thermal-zones {
> + cpu-thermal {
> + polling-delay-passive = <500>;
> + polling-delay = <1000>;
> + thermal-sensors = <&ths 2>;
> + sustainable-power = <1000>;
> +
> + trips {
> + cpu_threshold: cpu-trip-0 {
> + temperature = <60000>;
> + type = "passive";
> + hysteresis = <0>;
> + };
> + cpu_target: cpu-trip-1 {
> + temperature = <70000>;
> + type = "passive";
> + hysteresis = <0>;
> + };
> + cpu_critical: cpu-trip-2 {
> + temperature = <110000>;
> + type = "critical";
> + hysteresis = <0>;
> + };
> + };
> + };
> +
> + gpu-thermal {
> + polling-delay-passive = <500>;
> + polling-delay = <1000>;
> + thermal-sensors = <&ths 0>;
> + sustainable-power = <1100>;
> +
> + trips {
> + gpu_temp_critical: gpu-trip-0 {
> + temperature = <110000>;
> + type = "critical";
> + hysteresis = <0>;
> + };
> + };
> + };
> +
> + ve-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> + thermal-sensors = <&ths 1>;
> +
> + trips {
> + ve_temp_critical: ve-trip-0 {
> + temperature = <110000>;
> + type = "critical";
> + hysteresis = <0>;
> + };
> + };
> + };
> +
> + ddr-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> + thermal-sensors = <&ths 3>;
> +
> + trips {
> + ddr_temp_critical: ddr-trip-0 {
> + temperature = <110000>;
> + type = "critical";
> + hysteresis = <0>;
> + };
> + };
> + };
> + };
> };
>
WARNING: multiple messages have this Message-ID (diff)
From: "Jernej Škrabec" <jernej.skrabec@gmail.com>
To: Vasily Khoruzhick <anarsoul@gmail.com>,
Yangtao Li <tiny.windzz@gmail.com>, Chen-Yu Tsai <wens@csie.org>,
Samuel Holland <samuel@sholland.org>,
Andre Przywara <andre.przywara@arm.com>
Cc: "Rafael J . Wysocki" <rafael@kernel.org>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Zhang Rui <rui.zhang@intel.com>,
Lukasz Luba <lukasz.luba@arm.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Martin Botka <martin.botka@somainline.org>,
Maksim Kiselev <bigunclemax@gmail.com>,
Bob McChesney <bob@electricworry.net>,
linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-sunxi@lists.linux.dev
Subject: Re: [PATCH v5 7/7] arm64: dts: allwinner: h616: Add thermal sensor and zones
Date: Thu, 22 Feb 2024 19:27:49 +0100 [thread overview]
Message-ID: <6017340.lOV4Wx5bFT@jernej-laptop> (raw)
In-Reply-To: <20240219153639.179814-8-andre.przywara@arm.com>
Dne ponedeljek, 19. februar 2024 ob 16:36:39 CET je Andre Przywara napisal(a):
> From: Martin Botka <martin.botka@somainline.org>
>
> There are four thermal sensors:
> - CPU
> - GPU
> - VE
> - DRAM
>
> Add the thermal sensor configuration and the thermal zones.
>
> Signed-off-by: Martin Botka <martin.botka@somainline.org>
> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Best regards,
Jernej
> ---
> .../arm64/boot/dts/allwinner/sun50i-h616.dtsi | 88 +++++++++++++++++++
> 1 file changed, 88 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
> index 12ffabc79bcde..7c7d7c285505c 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
> @@ -9,6 +9,7 @@
> #include <dt-bindings/clock/sun6i-rtc.h>
> #include <dt-bindings/reset/sun50i-h616-ccu.h>
> #include <dt-bindings/reset/sun50i-h6-r-ccu.h>
> +#include <dt-bindings/thermal/thermal.h>
>
> / {
> interrupt-parent = <&gic>;
> @@ -138,6 +139,10 @@ sid: efuse@3006000 {
> reg = <0x03006000 0x1000>;
> #address-cells = <1>;
> #size-cells = <1>;
> +
> + ths_calibration: thermal-sensor-calibration@14 {
> + reg = <0x14 0x8>;
> + };
> };
>
> watchdog: watchdog@30090a0 {
> @@ -517,6 +522,19 @@ mdio0: mdio {
> };
> };
>
> + ths: thermal-sensor@5070400 {
> + compatible = "allwinner,sun50i-h616-ths";
> + reg = <0x05070400 0x400>;
> + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ccu CLK_BUS_THS>;
> + clock-names = "bus";
> + resets = <&ccu RST_BUS_THS>;
> + nvmem-cells = <&ths_calibration>;
> + nvmem-cell-names = "calibration";
> + allwinner,sram = <&syscon>;
> + #thermal-sensor-cells = <1>;
> + };
> +
> usbotg: usb@5100000 {
> compatible = "allwinner,sun50i-h616-musb",
> "allwinner,sun8i-h3-musb";
> @@ -761,4 +779,74 @@ r_rsb: rsb@7083000 {
> #size-cells = <0>;
> };
> };
> +
> + thermal-zones {
> + cpu-thermal {
> + polling-delay-passive = <500>;
> + polling-delay = <1000>;
> + thermal-sensors = <&ths 2>;
> + sustainable-power = <1000>;
> +
> + trips {
> + cpu_threshold: cpu-trip-0 {
> + temperature = <60000>;
> + type = "passive";
> + hysteresis = <0>;
> + };
> + cpu_target: cpu-trip-1 {
> + temperature = <70000>;
> + type = "passive";
> + hysteresis = <0>;
> + };
> + cpu_critical: cpu-trip-2 {
> + temperature = <110000>;
> + type = "critical";
> + hysteresis = <0>;
> + };
> + };
> + };
> +
> + gpu-thermal {
> + polling-delay-passive = <500>;
> + polling-delay = <1000>;
> + thermal-sensors = <&ths 0>;
> + sustainable-power = <1100>;
> +
> + trips {
> + gpu_temp_critical: gpu-trip-0 {
> + temperature = <110000>;
> + type = "critical";
> + hysteresis = <0>;
> + };
> + };
> + };
> +
> + ve-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> + thermal-sensors = <&ths 1>;
> +
> + trips {
> + ve_temp_critical: ve-trip-0 {
> + temperature = <110000>;
> + type = "critical";
> + hysteresis = <0>;
> + };
> + };
> + };
> +
> + ddr-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> + thermal-sensors = <&ths 3>;
> +
> + trips {
> + ddr_temp_critical: ddr-trip-0 {
> + temperature = <110000>;
> + type = "critical";
> + hysteresis = <0>;
> + };
> + };
> + };
> + };
> };
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2024-02-22 18:27 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-19 15:36 [PATCH v5 0/7] add support for H616 thermal system Andre Przywara
2024-02-19 15:36 ` Andre Przywara
2024-02-19 15:36 ` [PATCH v5 1/7] soc: sunxi: sram: export register 0 for THS on H616 Andre Przywara
2024-02-19 15:36 ` Andre Przywara
2024-02-22 18:26 ` Jernej Škrabec
2024-02-22 18:26 ` Jernej Škrabec
2024-02-22 18:44 ` Daniel Lezcano
2024-02-22 18:44 ` Daniel Lezcano
2024-02-22 19:15 ` Jernej Škrabec
2024-02-22 19:15 ` Jernej Škrabec
2024-02-23 16:02 ` Andre Przywara
2024-02-23 16:02 ` Andre Przywara
2024-02-23 17:00 ` Daniel Lezcano
2024-02-23 17:00 ` Daniel Lezcano
2024-02-23 17:25 ` Andre Przywara
2024-02-23 17:25 ` Andre Przywara
2024-02-19 15:36 ` [PATCH v5 2/7] dt-bindings: thermal: sun8i: Add H616 THS controller Andre Przywara
2024-02-19 15:36 ` Andre Przywara
2024-02-19 15:36 ` [PATCH v5 3/7] thermal: sun8i: explain unknown H6 register value Andre Przywara
2024-02-19 15:36 ` Andre Przywara
2024-02-19 15:36 ` [PATCH v5 4/7] thermal: sun8i: extend H6 calibration to support 4 sensors Andre Przywara
2024-02-19 15:36 ` Andre Przywara
2024-02-19 15:36 ` [PATCH v5 5/7] thermal: sun8i: add SRAM register access code Andre Przywara
2024-02-19 15:36 ` Andre Przywara
2024-02-19 15:36 ` [PATCH v5 6/7] thermal: sun8i: add support for H616 THS controller Andre Przywara
2024-02-19 15:36 ` Andre Przywara
2024-02-19 15:36 ` [PATCH v5 7/7] arm64: dts: allwinner: h616: Add thermal sensor and zones Andre Przywara
2024-02-19 15:36 ` Andre Przywara
2024-02-22 18:27 ` Jernej Škrabec [this message]
2024-02-22 18:27 ` Jernej Škrabec
2024-02-23 19:59 ` Jernej Škrabec
2024-02-23 19:59 ` Jernej Škrabec
2024-02-23 20:41 ` Jernej Škrabec
2024-02-23 20:41 ` Jernej Škrabec
2024-02-21 13:42 ` [PATCH v5 0/7] add support for H616 thermal system Daniel Lezcano
2024-02-21 13:42 ` Daniel Lezcano
2024-02-21 21:53 ` Vasily Khoruzhick
2024-02-21 21:53 ` Vasily Khoruzhick
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6017340.lOV4Wx5bFT@jernej-laptop \
--to=jernej.skrabec@gmail.com \
--cc=anarsoul@gmail.com \
--cc=andre.przywara@arm.com \
--cc=bigunclemax@gmail.com \
--cc=bob@electricworry.net \
--cc=conor+dt@kernel.org \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=lukasz.luba@arm.com \
--cc=martin.botka@somainline.org \
--cc=rafael@kernel.org \
--cc=robh+dt@kernel.org \
--cc=rui.zhang@intel.com \
--cc=samuel@sholland.org \
--cc=tiny.windzz@gmail.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.