From: Wen Gong <wgong@codeaurora.org>
To: Kalle Valo <kvalo@codeaurora.org>
Cc: linux-wireless@vger.kernel.org, ath10k@lists.infradead.org
Subject: Re: [PATCH v2] ath10k: add fw coredump for sdio when firmware assert
Date: Mon, 23 Sep 2019 19:09:51 +0800 [thread overview]
Message-ID: <6b7927f633cb7cbe2ba0d958d7d06f9a@codeaurora.org> (raw)
In-Reply-To: <874l15c20j.fsf@codeaurora.org>
On 2019-09-21 19:38, Kalle Valo wrote:
>
> What's wrong with ath10k_sdio_hif_diag_read()? AFAICS this whole
> function duplicates just what it does.
ath10k_sdio_hif_diag_read's buffer size is limit,
and the dump memory/register's buffer size is larger than the diag
window's limit,
if use it directly will trigger crash like this for every time.
[ 149.947624] ath10k_sdio mmc1:0001:1: ath10k_sdio_hif_diag_read
buf_len :4
[ 149.954741] ath10k_sdio mmc1:0001:1: ath10k_sdio_hif_diag_read
buf_len :240
[ 151.005143] Unable to handle kernel paging request at virtual address
ffffffc0080ab980
[ 151.013077] Mem abort info:
[ 151.015866] ESR = 0x96000045
[ 151.018918] Exception class = DABT (current EL), IL = 32 bits
[ 151.024830] SET = 0, FnV = 0
[ 151.027880] EA = 0, S1PTW = 0
[ 151.031016] Data abort info:
[ 151.033892] ISV = 0, ISS = 0x00000045
[ 151.037723] CM = 0, WnR = 1
[ 151.040691] swapper pgtable: 4k pages, 39-bit VAs, pgdp =
0000000073b23692
[ 151.047560] [ffffffc0080ab980] pgd=0000000000000000,
pud=0000000000000000
[ 151.054354] Internal error: Oops: 96000045 [#1] PREEMPT SMP
[ 151.059925] Modules linked in: ath10k_sdio ath10k_core rfcomm uinput
cros_ec_rpmsg mtk_cam_isp ath mac80211 mtk_fd hci_uart btqca bluetooth
mtk_scp mtk_rpmsg rpmsg_core ecdh_generic mtk_scp_ipi bridge stp llc
nf_nat_tftp nf_conntrack_tftp nf_nat_ftp nf_conntrack_ftp esp6 ah6
xfrm6_mode_tunnel xfrm6_mode_transport xfrm4_mode_tunnel
xfrm4_mode_transport ip6t_REJECT ip6t_ipv6header ipt_MASQUERADE fuse
cfg80211 iio_trig_sysfs cros_ec_sensors_sync cros_ec_sensors
cros_ec_sensors_ring industrialio_triggered_buffer kfifo_buf
cros_ec_sensors_core lzo_rle lzo_compress zram asix usbnet mii joydev
[last unloaded: ath10k_core]
[ 151.114537] Process swapper/0 (pid: 0, stack limit =
0x00000000e30dc665)
[ 151.121238] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.19.72 #11
[ 151.127327] Hardware name: MediaTek kukui rev1 board (DT)
[ 151.132724] pstate: 20000085 (nzCv daIf -PAN -UAO)
[ 151.137525] pc : __memcpy+0x110/0x180
[ 151.141193] lr : swiotlb_tbl_unmap_single+0x84/0x150
[ 151.146151] sp : ffffff8008003c60
[ 151.149462] x29: ffffff8008003c90 x28: ffffffa2a9611f38
[ 151.154774] x27: ffffffa2a92cc018 x26: 0000000000000000
[ 151.160087] x25: ffffffa2a90b8000 x24: 0000000000000001
[ 151.165399] x23: ffffffa2a975e000 x22: 0000000000001400
[ 151.170710] x21: 0000000000000000 x20: 00000000fc7ff000
[ 151.176021] x19: 00000000000000f0 x18: 0000000000000020
[ 151.181332] x17: 0000000000000000 x16: 0000000000000000
[ 151.186643] x15: 00000000ffffffff x14: 0000000000000000
[ 151.191955] x13: 0000000000000000 x12: 0000000000000000
[ 151.197266] x11: 0000000000000000 x10: 0000000000000000
[ 151.202578] x9 : 0000000000000000 x8 : 0000000000000000
[ 151.207890] x7 : 0000000000000000 x6 : ffffffc0080ab980
[ 151.213202] x5 : ffffff8016ffbdc8 x4 : 0000000000000000
[ 151.218514] x3 : 0000000000000002 x2 : 0000000000000070
[ 151.223825] x1 : fffffff37c7ff040 x0 : ffffffc0080ab980
[ 151.229138] Call trace:
[ 151.231585] __memcpy+0x110/0x180
[ 151.234899] unmap_single+0x6c/0x84
[ 151.238386] swiotlb_unmap_sg_attrs+0x54/0x80
[ 151.242744] __swiotlb_unmap_sg_attrs+0xa0/0xb8
[ 151.247277] msdc_unprepare_data+0x6c/0x84
[ 151.251372] msdc_request_done+0x58/0x84
[ 151.255292] msdc_data_xfer_done+0x1a0/0x1c8
[ 151.259559] msdc_irq+0x12c/0x17c
[ 151.262876] __handle_irq_event_percpu+0xe4/0x250
[ 151.267578] handle_irq_event_percpu+0x28/0x68
[ 151.272018] handle_irq_event+0x48/0x78
[ 151.275853] handle_fasteoi_irq+0xd0/0x1a0
[ 151.279948] __handle_domain_irq+0x84/0xc4
[ 151.284042] gic_handle_irq+0x124/0x1a4
[ 151.287875] el1_irq+0xb0/0x128
[ 151.291016] cpuidle_enter_state+0x298/0x328
[ 151.295282] cpuidle_enter+0x30/0x40
[ 151.298856] do_idle+0x190/0x270
[ 151.302081] cpu_startup_entry+0x24/0x28
[ 151.306005] rest_init+0xd4/0xe0
[ 151.309233] start_kernel+0x30c/0x38c
[ 151.312896] Code: a8c12027 a8c12829 a8c1302b a8c1382d (a88120c7)
[ 151.318987] ---[ end trace 4d779fa7753769c5 ]---
[ 151.342768] Kernel panic - not syncing: Fatal exception in interrupt
[ 151.349134] SMP: stopping secondary CPUs
[ 151.353074] Kernel Offset: 0x22a0400000 from 0xffffff8008000000
[ 151.358991] CPU features: 0x0,2188200c
[ 151.362735] Memory Limit: none
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
WARNING: multiple messages have this Message-ID (diff)
From: Wen Gong <wgong@codeaurora.org>
To: Kalle Valo <kvalo@codeaurora.org>
Cc: ath10k@lists.infradead.org, linux-wireless@vger.kernel.org
Subject: Re: [PATCH v2] ath10k: add fw coredump for sdio when firmware assert
Date: Mon, 23 Sep 2019 19:09:51 +0800 [thread overview]
Message-ID: <6b7927f633cb7cbe2ba0d958d7d06f9a@codeaurora.org> (raw)
In-Reply-To: <874l15c20j.fsf@codeaurora.org>
On 2019-09-21 19:38, Kalle Valo wrote:
>
> What's wrong with ath10k_sdio_hif_diag_read()? AFAICS this whole
> function duplicates just what it does.
ath10k_sdio_hif_diag_read's buffer size is limit,
and the dump memory/register's buffer size is larger than the diag
window's limit,
if use it directly will trigger crash like this for every time.
[ 149.947624] ath10k_sdio mmc1:0001:1: ath10k_sdio_hif_diag_read
buf_len :4
[ 149.954741] ath10k_sdio mmc1:0001:1: ath10k_sdio_hif_diag_read
buf_len :240
[ 151.005143] Unable to handle kernel paging request at virtual address
ffffffc0080ab980
[ 151.013077] Mem abort info:
[ 151.015866] ESR = 0x96000045
[ 151.018918] Exception class = DABT (current EL), IL = 32 bits
[ 151.024830] SET = 0, FnV = 0
[ 151.027880] EA = 0, S1PTW = 0
[ 151.031016] Data abort info:
[ 151.033892] ISV = 0, ISS = 0x00000045
[ 151.037723] CM = 0, WnR = 1
[ 151.040691] swapper pgtable: 4k pages, 39-bit VAs, pgdp =
0000000073b23692
[ 151.047560] [ffffffc0080ab980] pgd=0000000000000000,
pud=0000000000000000
[ 151.054354] Internal error: Oops: 96000045 [#1] PREEMPT SMP
[ 151.059925] Modules linked in: ath10k_sdio ath10k_core rfcomm uinput
cros_ec_rpmsg mtk_cam_isp ath mac80211 mtk_fd hci_uart btqca bluetooth
mtk_scp mtk_rpmsg rpmsg_core ecdh_generic mtk_scp_ipi bridge stp llc
nf_nat_tftp nf_conntrack_tftp nf_nat_ftp nf_conntrack_ftp esp6 ah6
xfrm6_mode_tunnel xfrm6_mode_transport xfrm4_mode_tunnel
xfrm4_mode_transport ip6t_REJECT ip6t_ipv6header ipt_MASQUERADE fuse
cfg80211 iio_trig_sysfs cros_ec_sensors_sync cros_ec_sensors
cros_ec_sensors_ring industrialio_triggered_buffer kfifo_buf
cros_ec_sensors_core lzo_rle lzo_compress zram asix usbnet mii joydev
[last unloaded: ath10k_core]
[ 151.114537] Process swapper/0 (pid: 0, stack limit =
0x00000000e30dc665)
[ 151.121238] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.19.72 #11
[ 151.127327] Hardware name: MediaTek kukui rev1 board (DT)
[ 151.132724] pstate: 20000085 (nzCv daIf -PAN -UAO)
[ 151.137525] pc : __memcpy+0x110/0x180
[ 151.141193] lr : swiotlb_tbl_unmap_single+0x84/0x150
[ 151.146151] sp : ffffff8008003c60
[ 151.149462] x29: ffffff8008003c90 x28: ffffffa2a9611f38
[ 151.154774] x27: ffffffa2a92cc018 x26: 0000000000000000
[ 151.160087] x25: ffffffa2a90b8000 x24: 0000000000000001
[ 151.165399] x23: ffffffa2a975e000 x22: 0000000000001400
[ 151.170710] x21: 0000000000000000 x20: 00000000fc7ff000
[ 151.176021] x19: 00000000000000f0 x18: 0000000000000020
[ 151.181332] x17: 0000000000000000 x16: 0000000000000000
[ 151.186643] x15: 00000000ffffffff x14: 0000000000000000
[ 151.191955] x13: 0000000000000000 x12: 0000000000000000
[ 151.197266] x11: 0000000000000000 x10: 0000000000000000
[ 151.202578] x9 : 0000000000000000 x8 : 0000000000000000
[ 151.207890] x7 : 0000000000000000 x6 : ffffffc0080ab980
[ 151.213202] x5 : ffffff8016ffbdc8 x4 : 0000000000000000
[ 151.218514] x3 : 0000000000000002 x2 : 0000000000000070
[ 151.223825] x1 : fffffff37c7ff040 x0 : ffffffc0080ab980
[ 151.229138] Call trace:
[ 151.231585] __memcpy+0x110/0x180
[ 151.234899] unmap_single+0x6c/0x84
[ 151.238386] swiotlb_unmap_sg_attrs+0x54/0x80
[ 151.242744] __swiotlb_unmap_sg_attrs+0xa0/0xb8
[ 151.247277] msdc_unprepare_data+0x6c/0x84
[ 151.251372] msdc_request_done+0x58/0x84
[ 151.255292] msdc_data_xfer_done+0x1a0/0x1c8
[ 151.259559] msdc_irq+0x12c/0x17c
[ 151.262876] __handle_irq_event_percpu+0xe4/0x250
[ 151.267578] handle_irq_event_percpu+0x28/0x68
[ 151.272018] handle_irq_event+0x48/0x78
[ 151.275853] handle_fasteoi_irq+0xd0/0x1a0
[ 151.279948] __handle_domain_irq+0x84/0xc4
[ 151.284042] gic_handle_irq+0x124/0x1a4
[ 151.287875] el1_irq+0xb0/0x128
[ 151.291016] cpuidle_enter_state+0x298/0x328
[ 151.295282] cpuidle_enter+0x30/0x40
[ 151.298856] do_idle+0x190/0x270
[ 151.302081] cpu_startup_entry+0x24/0x28
[ 151.306005] rest_init+0xd4/0xe0
[ 151.309233] start_kernel+0x30c/0x38c
[ 151.312896] Code: a8c12027 a8c12829 a8c1302b a8c1382d (a88120c7)
[ 151.318987] ---[ end trace 4d779fa7753769c5 ]---
[ 151.342768] Kernel panic - not syncing: Fatal exception in interrupt
[ 151.349134] SMP: stopping secondary CPUs
[ 151.353074] Kernel Offset: 0x22a0400000 from 0xffffff8008000000
[ 151.358991] CPU features: 0x0,2188200c
[ 151.362735] Memory Limit: none
next prev parent reply other threads:[~2019-09-23 11:09 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-30 2:32 [PATCH v2] ath10k: add fw coredump for sdio when firmware assert Wen Gong
2019-08-30 2:32 ` Wen Gong
2019-09-21 11:26 ` Kalle Valo
2019-09-21 11:26 ` Kalle Valo
2019-09-21 11:35 ` Kalle Valo
2019-09-21 11:35 ` Kalle Valo
2019-09-23 11:07 ` Wen Gong
2019-09-23 11:07 ` Wen Gong
2019-09-24 3:38 ` Wen Gong
2019-09-24 3:38 ` Wen Gong
2019-09-21 11:38 ` Kalle Valo
2019-09-21 11:38 ` Kalle Valo
2019-09-23 11:09 ` Wen Gong [this message]
2019-09-23 11:09 ` Wen Gong
2019-09-23 11:37 ` Kalle Valo
2019-09-23 11:37 ` Kalle Valo
2019-09-23 12:12 ` Wen Gong
2019-09-23 12:12 ` Wen Gong
2019-09-21 11:49 ` Kalle Valo
2019-09-21 11:49 ` Kalle Valo
2019-09-23 11:10 ` Wen Gong
2019-09-23 11:10 ` Wen Gong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6b7927f633cb7cbe2ba0d958d7d06f9a@codeaurora.org \
--to=wgong@codeaurora.org \
--cc=ath10k@lists.infradead.org \
--cc=kvalo@codeaurora.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.