Re: Terratec DMX XFire DSP

Re: Terratec DMX XFire DSP

[Friedrich.Ewaldt]

Hi Benny,

I'm quite sure. Have a look at the following link <;-)

ftp://ftp.terratec.de/Audio/DMXXfire/Images/DMXXFire1024_Board_L.jpg

>>regarding your cs46xx DSP and codec list:
>>AFAIK the Xfire card has got a CS4624 DSP, not a CS4630. The main (only?)
>>difference should be the processing power (CS4624: 255MIPS, CS4630:
>>420MIPS).
>
>Are you sure ?
>If the Windows system properties tells say that's a CS4624 it can be 
>becourse
>it uses the same driver for both cs4630 and cs4624, as they are binary 
>compatible.
>If you do a "lspci" on Linux it will probably say that it's cs4624/ 
>..SoundFusion (something), but does
>not mean that the device really has a cs4624.

>Just sounds strange for me that Terratec have choosen the cs4624 ....

(It was probably cheaper. The XFire was a competitive product to the
Soundblaster1024. It was about 100DM ~ 50EU ~ 50$)

regards fritz_e

-- 
GMX - Die Kommunikationsplattform im Internet.
http://www.gmx.net



-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf

Terratec DMX XFire DSP

[Friedrich.Ewaldt]

Hi Benny,
regarding your cs46xx DSP and codec list:
AFAIK the Xfire card has got a CS4624 DSP, not a CS4630. The main (only?)
difference should be the processing power (CS4624: 255MIPS, CS4630: 420MIPS).
I think the CS4630 can handle AC3 input through S/P-DIF whereas the CS4624
does not (because of the proc. power?). AC3 out should be working with both
DSPs.
Are there any more differences you know of?
Is there any possibility for me to check the codec type of the Xfire card
e.g. under windows or by looking at the components on the cards?
regards
fritz_e

-- 
GMX - Die Kommunikationsplattform im Internet.
http://www.gmx.net



-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf

Re: Terratec DMX XFire DSP

[Benny Sjostrand]

>
>
>regarding your cs46xx DSP and codec list:
>AFAIK the Xfire card has got a CS4624 DSP, not a CS4630. The main (only?)
>difference should be the processing power (CS4624: 255MIPS, CS4630: 420MIPS).
>
Are you sure ?
If the Windows system properties tells say that's a CS4624 it can be 
becourse
it uses the same driver for both cs4630 and cs4624, as they are binary 
compatible.
If you do a "lspci" on Linux it will probably say that it's cs4624/ 
..SoundFusion (something), but does
not mean that the device really has a cs4624.

Just sounds strange for me that Terratec have choosen the cs4624 ....

>
>Are there any more differences you know of?
>Is there any possibility for me to check the codec type of the Xfire card
>e.g. under windows or by looking at the components on the cards?
>
Look at your card physically, you may find the codec chips close to the 
DSP chip.
It would be great if you could do so.

/Benny




-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf