All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Heiko Stübner" <heiko@sntech.de>
To: Maximilian Weigand <mweigand2017@gmail.com>,
	Lee Jones <lee@kernel.org>,
	Daniel Thompson <daniel.thompson@linaro.org>,
	Jingoo Han <jingoohan1@gmail.com>, Helge Deller <deller@gmx.de>,
	Pavel Machek <pavel@ucw.cz>, Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: dri-devel@lists.freedesktop.org, linux-fbdev@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-leds@vger.kernel.org,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org,
	Maximilian Weigand <mweigand@mweigand.net>
Subject: Re: [PATCH 2/3] dt-bindings: backlight: lm3630a: add entries to control boost frequency
Date: Sat, 17 Jun 2023 18:34:28 +0200	[thread overview]
Message-ID: <7491264.lOV4Wx5bFT@diego> (raw)
In-Reply-To: <17576d81-a342-0b77-367a-eb9f2b97b734@linaro.org>

Am Samstag, 17. Juni 2023, 12:12:17 CEST schrieb Krzysztof Kozlowski:
> On 14/06/2023 21:08, Maximilian Weigand wrote:
> > From: Maximilian Weigand <mweigand@mweigand.net>
> > 
> > Add 'ti,boost_use_1mhz' to switch between 500 kHz and 1 MHz boost
> > converter switching frequency, and add 'ti,boost_frequency_shift' to
> > activate a frequency shift to 560 kHz or 1.12 MHz, respectively.
> > 
> > Signed-off-by: Maximilian Weigand <mweigand@mweigand.net>
> > ---
> >  .../bindings/leds/backlight/lm3630a-backlight.yaml           | 12 ++++++++++++
> >  1 file changed, 12 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
> > index 3c9b4054ed9a..ef7ea0ad2d25 100644
> > --- a/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
> > +++ b/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
> > @@ -33,6 +33,18 @@ properties:
> >      description: GPIO to use to enable/disable the backlight (HWEN pin).
> >      maxItems: 1
> >  
> > +  ti,boost_use_1mhz:
> 
> No underscores in property names.
> 
> > +    description: |
> 
> Do not need '|' unless you need to preserve formatting.
> 
> > +      If present, change the boost converter switching frequency from the
> > +      default 500 kHz to 1 MHz. Refer to data sheet for hardware requirements.
> > +    type: boolean
> > +
> > +  ti,boost_frequency_shift:
> > +    description: |
> > +      If present, change boost converter switching frequency from 500 kHz to
> > +      560 kHz or from 1 Mhz to 1.12 Mhz, respectively.
> 
> So just make it a property choosing the frequency, not bools, with
> proper unit suffix.

i.e.
ti,boost-frequency-hz = <x>;
with x being 500000, 560000, 1000000, 1120000

with the driver failing when the frequency is not achievable
with the two knobs of 1mhz and shift.




WARNING: multiple messages have this Message-ID (diff)
From: "Heiko Stübner" <heiko@sntech.de>
To: Maximilian Weigand <mweigand2017@gmail.com>,
	Lee Jones <lee@kernel.org>,
	Daniel Thompson <daniel.thompson@linaro.org>,
	Jingoo Han <jingoohan1@gmail.com>, Helge Deller <deller@gmx.de>,
	Pavel Machek <pavel@ucw.cz>, Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: dri-devel@lists.freedesktop.org, linux-fbdev@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-leds@vger.kernel.org,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org,
	Maximilian Weigand <mweigand@mweigand.net>
Subject: Re: [PATCH 2/3] dt-bindings: backlight: lm3630a: add entries to control boost frequency
Date: Sat, 17 Jun 2023 18:34:28 +0200	[thread overview]
Message-ID: <7491264.lOV4Wx5bFT@diego> (raw)
In-Reply-To: <17576d81-a342-0b77-367a-eb9f2b97b734@linaro.org>

Am Samstag, 17. Juni 2023, 12:12:17 CEST schrieb Krzysztof Kozlowski:
> On 14/06/2023 21:08, Maximilian Weigand wrote:
> > From: Maximilian Weigand <mweigand@mweigand.net>
> > 
> > Add 'ti,boost_use_1mhz' to switch between 500 kHz and 1 MHz boost
> > converter switching frequency, and add 'ti,boost_frequency_shift' to
> > activate a frequency shift to 560 kHz or 1.12 MHz, respectively.
> > 
> > Signed-off-by: Maximilian Weigand <mweigand@mweigand.net>
> > ---
> >  .../bindings/leds/backlight/lm3630a-backlight.yaml           | 12 ++++++++++++
> >  1 file changed, 12 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
> > index 3c9b4054ed9a..ef7ea0ad2d25 100644
> > --- a/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
> > +++ b/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
> > @@ -33,6 +33,18 @@ properties:
> >      description: GPIO to use to enable/disable the backlight (HWEN pin).
> >      maxItems: 1
> >  
> > +  ti,boost_use_1mhz:
> 
> No underscores in property names.
> 
> > +    description: |
> 
> Do not need '|' unless you need to preserve formatting.
> 
> > +      If present, change the boost converter switching frequency from the
> > +      default 500 kHz to 1 MHz. Refer to data sheet for hardware requirements.
> > +    type: boolean
> > +
> > +  ti,boost_frequency_shift:
> > +    description: |
> > +      If present, change boost converter switching frequency from 500 kHz to
> > +      560 kHz or from 1 Mhz to 1.12 Mhz, respectively.
> 
> So just make it a property choosing the frequency, not bools, with
> proper unit suffix.

i.e.
ti,boost-frequency-hz = <x>;
with x being 500000, 560000, 1000000, 1120000

with the driver failing when the frequency is not achievable
with the two knobs of 1mhz and shift.




_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

WARNING: multiple messages have this Message-ID (diff)
From: "Heiko Stübner" <heiko@sntech.de>
To: Maximilian Weigand <mweigand2017@gmail.com>,
	Lee Jones <lee@kernel.org>,
	Daniel Thompson <daniel.thompson@linaro.org>,
	Jingoo Han <jingoohan1@gmail.com>, Helge Deller <deller@gmx.de>,
	Pavel Machek <pavel@ucw.cz>, Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: dri-devel@lists.freedesktop.org, linux-fbdev@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-leds@vger.kernel.org,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org,
	Maximilian Weigand <mweigand@mweigand.net>
Subject: Re: [PATCH 2/3] dt-bindings: backlight: lm3630a: add entries to control boost frequency
Date: Sat, 17 Jun 2023 18:34:28 +0200	[thread overview]
Message-ID: <7491264.lOV4Wx5bFT@diego> (raw)
In-Reply-To: <17576d81-a342-0b77-367a-eb9f2b97b734@linaro.org>

Am Samstag, 17. Juni 2023, 12:12:17 CEST schrieb Krzysztof Kozlowski:
> On 14/06/2023 21:08, Maximilian Weigand wrote:
> > From: Maximilian Weigand <mweigand@mweigand.net>
> > 
> > Add 'ti,boost_use_1mhz' to switch between 500 kHz and 1 MHz boost
> > converter switching frequency, and add 'ti,boost_frequency_shift' to
> > activate a frequency shift to 560 kHz or 1.12 MHz, respectively.
> > 
> > Signed-off-by: Maximilian Weigand <mweigand@mweigand.net>
> > ---
> >  .../bindings/leds/backlight/lm3630a-backlight.yaml           | 12 ++++++++++++
> >  1 file changed, 12 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
> > index 3c9b4054ed9a..ef7ea0ad2d25 100644
> > --- a/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
> > +++ b/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
> > @@ -33,6 +33,18 @@ properties:
> >      description: GPIO to use to enable/disable the backlight (HWEN pin).
> >      maxItems: 1
> >  
> > +  ti,boost_use_1mhz:
> 
> No underscores in property names.
> 
> > +    description: |
> 
> Do not need '|' unless you need to preserve formatting.
> 
> > +      If present, change the boost converter switching frequency from the
> > +      default 500 kHz to 1 MHz. Refer to data sheet for hardware requirements.
> > +    type: boolean
> > +
> > +  ti,boost_frequency_shift:
> > +    description: |
> > +      If present, change boost converter switching frequency from 500 kHz to
> > +      560 kHz or from 1 Mhz to 1.12 Mhz, respectively.
> 
> So just make it a property choosing the frequency, not bools, with
> proper unit suffix.

i.e.
ti,boost-frequency-hz = <x>;
with x being 500000, 560000, 1000000, 1120000

with the driver failing when the frequency is not achievable
with the two knobs of 1mhz and shift.




_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: "Heiko Stübner" <heiko@sntech.de>
To: Maximilian Weigand <mweigand2017@gmail.com>,
	Lee Jones <lee@kernel.org>,
	Daniel Thompson <daniel.thompson@linaro.org>,
	Jingoo Han <jingoohan1@gmail.com>, Helge Deller <deller@gmx.de>,
	Pavel Machek <pavel@ucw.cz>, Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: devicetree@vger.kernel.org, linux-fbdev@vger.kernel.org,
	Maximilian Weigand <mweigand@mweigand.net>,
	linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
	linux-rockchip@lists.infradead.org, linux-leds@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 2/3] dt-bindings: backlight: lm3630a: add entries to control boost frequency
Date: Sat, 17 Jun 2023 18:34:28 +0200	[thread overview]
Message-ID: <7491264.lOV4Wx5bFT@diego> (raw)
In-Reply-To: <17576d81-a342-0b77-367a-eb9f2b97b734@linaro.org>

Am Samstag, 17. Juni 2023, 12:12:17 CEST schrieb Krzysztof Kozlowski:
> On 14/06/2023 21:08, Maximilian Weigand wrote:
> > From: Maximilian Weigand <mweigand@mweigand.net>
> > 
> > Add 'ti,boost_use_1mhz' to switch between 500 kHz and 1 MHz boost
> > converter switching frequency, and add 'ti,boost_frequency_shift' to
> > activate a frequency shift to 560 kHz or 1.12 MHz, respectively.
> > 
> > Signed-off-by: Maximilian Weigand <mweigand@mweigand.net>
> > ---
> >  .../bindings/leds/backlight/lm3630a-backlight.yaml           | 12 ++++++++++++
> >  1 file changed, 12 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
> > index 3c9b4054ed9a..ef7ea0ad2d25 100644
> > --- a/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
> > +++ b/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
> > @@ -33,6 +33,18 @@ properties:
> >      description: GPIO to use to enable/disable the backlight (HWEN pin).
> >      maxItems: 1
> >  
> > +  ti,boost_use_1mhz:
> 
> No underscores in property names.
> 
> > +    description: |
> 
> Do not need '|' unless you need to preserve formatting.
> 
> > +      If present, change the boost converter switching frequency from the
> > +      default 500 kHz to 1 MHz. Refer to data sheet for hardware requirements.
> > +    type: boolean
> > +
> > +  ti,boost_frequency_shift:
> > +    description: |
> > +      If present, change boost converter switching frequency from 500 kHz to
> > +      560 kHz or from 1 Mhz to 1.12 Mhz, respectively.
> 
> So just make it a property choosing the frequency, not bools, with
> proper unit suffix.

i.e.
ti,boost-frequency-hz = <x>;
with x being 500000, 560000, 1000000, 1120000

with the driver failing when the frequency is not achievable
with the two knobs of 1mhz and shift.




  reply	other threads:[~2023-06-17 16:34 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-06-14 19:08 [PATCH 0/3] backlight: lm3630a: add functionality to change boost converter frequency Maximilian Weigand
2023-06-14 19:08 ` Maximilian Weigand
2023-06-14 19:08 ` Maximilian Weigand
2023-06-14 19:08 ` Maximilian Weigand
2023-06-14 19:08 ` [PATCH 1/3] backlight: lm3630a: add support for changing the boost frequency Maximilian Weigand
2023-06-14 19:08   ` Maximilian Weigand
2023-06-14 19:08   ` Maximilian Weigand
2023-06-14 19:08   ` Maximilian Weigand
2023-06-26 14:39   ` Daniel Thompson
2023-06-26 14:39     ` Daniel Thompson
2023-06-26 14:39     ` Daniel Thompson
2023-06-26 14:39     ` Daniel Thompson
2023-06-14 19:08 ` [PATCH 2/3] dt-bindings: backlight: lm3630a: add entries to control " Maximilian Weigand
2023-06-14 19:08   ` Maximilian Weigand
2023-06-14 19:08   ` Maximilian Weigand
2023-06-14 19:08   ` Maximilian Weigand
2023-06-17 10:12   ` Krzysztof Kozlowski
2023-06-17 10:12     ` Krzysztof Kozlowski
2023-06-17 10:12     ` Krzysztof Kozlowski
2023-06-17 10:12     ` Krzysztof Kozlowski
2023-06-17 16:34     ` Heiko Stübner [this message]
2023-06-17 16:34       ` Heiko Stübner
2023-06-17 16:34       ` Heiko Stübner
2023-06-17 16:34       ` Heiko Stübner
2023-06-17 17:42       ` Krzysztof Kozlowski
2023-06-17 17:42         ` Krzysztof Kozlowski
2023-06-17 17:42         ` Krzysztof Kozlowski
2023-06-17 17:42         ` Krzysztof Kozlowski
2023-06-17 18:15         ` Maximilian Weigand
2023-06-17 18:15           ` Maximilian Weigand
2023-06-17 18:15           ` Maximilian Weigand
2023-06-17 18:15           ` Maximilian Weigand
2023-06-14 19:08 ` [PATCH 3/3] arm64: dts: rockchip: shift boost frequency for rk3566-pinenote backlight Maximilian Weigand
2023-06-14 19:08   ` Maximilian Weigand
2023-06-14 19:08   ` Maximilian Weigand
2023-06-14 19:08   ` Maximilian Weigand

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=7491264.lOV4Wx5bFT@diego \
    --to=heiko@sntech.de \
    --cc=conor+dt@kernel.org \
    --cc=daniel.thompson@linaro.org \
    --cc=deller@gmx.de \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=jingoohan1@gmail.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=krzysztof.kozlowski@linaro.org \
    --cc=lee@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-fbdev@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=mweigand2017@gmail.com \
    --cc=mweigand@mweigand.net \
    --cc=pavel@ucw.cz \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.