From: Kevin Hilman <khilman@baylibre.com>
To: Neil Armstrong <narmstrong@baylibre.com>
Cc: linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Jerome Brunet <jbrunet@baylibre.com>
Subject: Re: [PATCH 4/9] arm64: dts: meson: g12a: add uart_ao_a pinctrl
Date: Tue, 12 Mar 2019 14:15:39 -0700 [thread overview]
Message-ID: <7h36nru744.fsf@baylibre.com> (raw)
In-Reply-To: <244fba9a-31ab-a75c-3de2-a66638a9d36d@baylibre.com>
Neil Armstrong <narmstrong@baylibre.com> writes:
> On 07/03/2019 16:13, Neil Armstrong wrote:
>> From: Jerome Brunet <jbrunet@baylibre.com>
>>
>> Add the always on UART pinctrl setting to the g12a soc DT and
>> use it for the u200 reference design
>>
>> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>> ---
>> .../arm64/boot/dts/amlogic/meson-g12a-u200.dts | 2 ++
>> arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 18 ++++++++++++++++++
>> 2 files changed, 20 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
>> index c44dbdddf2cf..f2afd0bf3e28 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
>> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
>> @@ -25,5 +25,7 @@
>>
>> &uart_AO {
>> status = "okay";
>> + pinctrl-0 = <&uart_ao_a_pins>;
>> + pinctrl-names = "default";
>> };
>>
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
>> index c141cc7f6b09..f8f055c49f9a 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
>> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
>> @@ -177,6 +177,24 @@
>> #gpio-cells = <2>;
>> gpio-ranges = <&ao_pinctrl 0 0 15>;
>> };
>> +
>> + uart_ao_a_pins: uart_a_ao {
>> + mux {
>> + groups = "uart_ao_a_tx",
>> + "uart_ao_a_rx";
>> + function = "uart_ao_a";
>> + bias-disable;
>> + };
>> + };
>> +
>> + uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts {
>> + mux {
>> + groups = "uart_ao_a_cts",
>> + "uart_ao_a_rts";
>> + function = "uart_ao_a";
>> + bias-disable;
>> + };
>> + };
>> };
>> };
>>
>>
>
> Will move this out of this patchset to the boards patchset
I assume you meant you'd move the first hunk, the one that modifies the
u200 board to the other series, but keep this hunk in this series?
Kevin
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
WARNING: multiple messages have this Message-ID (diff)
From: Kevin Hilman <khilman@baylibre.com>
To: Neil Armstrong <narmstrong@baylibre.com>
Cc: linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Jerome Brunet <jbrunet@baylibre.com>
Subject: Re: [PATCH 4/9] arm64: dts: meson: g12a: add uart_ao_a pinctrl
Date: Tue, 12 Mar 2019 14:15:39 -0700 [thread overview]
Message-ID: <7h36nru744.fsf@baylibre.com> (raw)
In-Reply-To: <244fba9a-31ab-a75c-3de2-a66638a9d36d@baylibre.com>
Neil Armstrong <narmstrong@baylibre.com> writes:
> On 07/03/2019 16:13, Neil Armstrong wrote:
>> From: Jerome Brunet <jbrunet@baylibre.com>
>>
>> Add the always on UART pinctrl setting to the g12a soc DT and
>> use it for the u200 reference design
>>
>> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>> ---
>> .../arm64/boot/dts/amlogic/meson-g12a-u200.dts | 2 ++
>> arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 18 ++++++++++++++++++
>> 2 files changed, 20 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
>> index c44dbdddf2cf..f2afd0bf3e28 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
>> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
>> @@ -25,5 +25,7 @@
>>
>> &uart_AO {
>> status = "okay";
>> + pinctrl-0 = <&uart_ao_a_pins>;
>> + pinctrl-names = "default";
>> };
>>
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
>> index c141cc7f6b09..f8f055c49f9a 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
>> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
>> @@ -177,6 +177,24 @@
>> #gpio-cells = <2>;
>> gpio-ranges = <&ao_pinctrl 0 0 15>;
>> };
>> +
>> + uart_ao_a_pins: uart_a_ao {
>> + mux {
>> + groups = "uart_ao_a_tx",
>> + "uart_ao_a_rx";
>> + function = "uart_ao_a";
>> + bias-disable;
>> + };
>> + };
>> +
>> + uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts {
>> + mux {
>> + groups = "uart_ao_a_cts",
>> + "uart_ao_a_rts";
>> + function = "uart_ao_a";
>> + bias-disable;
>> + };
>> + };
>> };
>> };
>>
>>
>
> Will move this out of this patchset to the boards patchset
I assume you meant you'd move the first hunk, the one that modifies the
u200 board to the other series, but keep this hunk in this series?
Kevin
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Kevin Hilman <khilman@baylibre.com>
To: Neil Armstrong <narmstrong@baylibre.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>,
linux-amlogic@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 4/9] arm64: dts: meson: g12a: add uart_ao_a pinctrl
Date: Tue, 12 Mar 2019 14:15:39 -0700 [thread overview]
Message-ID: <7h36nru744.fsf@baylibre.com> (raw)
In-Reply-To: <244fba9a-31ab-a75c-3de2-a66638a9d36d@baylibre.com>
Neil Armstrong <narmstrong@baylibre.com> writes:
> On 07/03/2019 16:13, Neil Armstrong wrote:
>> From: Jerome Brunet <jbrunet@baylibre.com>
>>
>> Add the always on UART pinctrl setting to the g12a soc DT and
>> use it for the u200 reference design
>>
>> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>> ---
>> .../arm64/boot/dts/amlogic/meson-g12a-u200.dts | 2 ++
>> arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 18 ++++++++++++++++++
>> 2 files changed, 20 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
>> index c44dbdddf2cf..f2afd0bf3e28 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
>> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
>> @@ -25,5 +25,7 @@
>>
>> &uart_AO {
>> status = "okay";
>> + pinctrl-0 = <&uart_ao_a_pins>;
>> + pinctrl-names = "default";
>> };
>>
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
>> index c141cc7f6b09..f8f055c49f9a 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
>> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
>> @@ -177,6 +177,24 @@
>> #gpio-cells = <2>;
>> gpio-ranges = <&ao_pinctrl 0 0 15>;
>> };
>> +
>> + uart_ao_a_pins: uart_a_ao {
>> + mux {
>> + groups = "uart_ao_a_tx",
>> + "uart_ao_a_rx";
>> + function = "uart_ao_a";
>> + bias-disable;
>> + };
>> + };
>> +
>> + uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts {
>> + mux {
>> + groups = "uart_ao_a_cts",
>> + "uart_ao_a_rts";
>> + function = "uart_ao_a";
>> + bias-disable;
>> + };
>> + };
>> };
>> };
>>
>>
>
> Will move this out of this patchset to the boards patchset
I assume you meant you'd move the first hunk, the one that modifies the
u200 board to the other series, but keep this hunk in this series?
Kevin
next prev parent reply other threads:[~2019-03-13 10:47 UTC|newest]
Thread overview: 81+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-07 15:13 [PATCH 0/9] arm64: dts: g12a: Add peripherals Neil Armstrong
2019-03-07 15:13 ` Neil Armstrong
2019-03-07 15:13 ` Neil Armstrong
2019-03-07 15:13 ` [PATCH 1/9] arm64: dts: meson: g12a: Add AO Clock + Reset Controller support Neil Armstrong
2019-03-07 15:13 ` Neil Armstrong
2019-03-07 15:13 ` Neil Armstrong
2019-03-15 21:07 ` Martin Blumenstingl
2019-03-15 21:07 ` Martin Blumenstingl
2019-03-15 21:07 ` Martin Blumenstingl
2019-03-16 14:26 ` Neil Armstrong
2019-03-16 14:26 ` Neil Armstrong
2019-03-16 14:26 ` Neil Armstrong
2019-03-07 15:13 ` [PATCH 2/9] arm64: dts: meson: g12a: Add AO Secure node Neil Armstrong
2019-03-07 15:13 ` Neil Armstrong
2019-03-07 15:13 ` Neil Armstrong
2019-03-15 21:09 ` Martin Blumenstingl
2019-03-15 21:09 ` Martin Blumenstingl
2019-03-15 21:09 ` Martin Blumenstingl
2019-03-07 15:13 ` [PATCH 3/9] arm64: dts: meson: g12a: add pinctrl support controllers Neil Armstrong
2019-03-07 15:13 ` Neil Armstrong
2019-03-07 15:13 ` Neil Armstrong
2019-03-07 15:13 ` [PATCH 4/9] arm64: dts: meson: g12a: add uart_ao_a pinctrl Neil Armstrong
2019-03-07 15:13 ` Neil Armstrong
2019-03-07 15:13 ` Neil Armstrong
2019-03-11 9:13 ` Neil Armstrong
2019-03-11 9:13 ` Neil Armstrong
2019-03-11 9:13 ` Neil Armstrong
2019-03-12 21:15 ` Kevin Hilman [this message]
2019-03-12 21:15 ` Kevin Hilman
2019-03-12 21:15 ` Kevin Hilman
2019-03-13 9:52 ` Neil Armstrong
2019-03-13 9:52 ` Neil Armstrong
2019-03-13 9:52 ` Neil Armstrong
2019-03-07 15:13 ` [PATCH 5/9] arm64: dts: meson: g12a: add reset controller Neil Armstrong
2019-03-07 15:13 ` Neil Armstrong
2019-03-07 15:13 ` Neil Armstrong
2019-03-15 21:31 ` Martin Blumenstingl
2019-03-15 21:31 ` Martin Blumenstingl
2019-03-15 21:31 ` Martin Blumenstingl
2019-03-16 14:31 ` Neil Armstrong
2019-03-16 14:31 ` Neil Armstrong
2019-03-16 14:31 ` Neil Armstrong
2019-03-16 22:09 ` Martin Blumenstingl
2019-03-16 22:09 ` Martin Blumenstingl
2019-03-16 22:09 ` Martin Blumenstingl
2019-03-07 15:13 ` [PATCH 6/9] arm64: dts: meson: g12a: Add UART A, B & C nodes and pins Neil Armstrong
2019-03-07 15:13 ` Neil Armstrong
2019-03-07 15:13 ` Neil Armstrong
2019-03-12 21:02 ` Kevin Hilman
2019-03-12 21:02 ` Kevin Hilman
2019-03-12 21:02 ` Kevin Hilman
2019-03-15 21:24 ` Martin Blumenstingl
2019-03-15 21:24 ` Martin Blumenstingl
2019-03-15 21:24 ` Martin Blumenstingl
2019-03-16 14:35 ` Neil Armstrong
2019-03-16 14:35 ` Neil Armstrong
2019-03-16 14:35 ` Neil Armstrong
2019-03-16 22:14 ` Martin Blumenstingl
2019-03-16 22:14 ` Martin Blumenstingl
2019-03-16 22:14 ` Martin Blumenstingl
2019-03-17 10:42 ` Neil Armstrong
2019-03-17 10:42 ` Neil Armstrong
2019-03-17 10:42 ` Neil Armstrong
2019-03-07 15:13 ` [PATCH 7/9] arm64: dts: meson: g12a: Add SAR ADC node Neil Armstrong
2019-03-07 15:13 ` Neil Armstrong
2019-03-07 15:13 ` Neil Armstrong
2019-03-15 21:16 ` Martin Blumenstingl
2019-03-15 21:16 ` Martin Blumenstingl
2019-03-15 21:16 ` Martin Blumenstingl
2019-03-07 15:13 ` [PATCH 8/9] arm64: dts: meson: g12a: Add G12A USB nodes Neil Armstrong
2019-03-07 15:13 ` Neil Armstrong
2019-03-07 15:13 ` Neil Armstrong
2019-03-15 21:40 ` Martin Blumenstingl
2019-03-15 21:40 ` Martin Blumenstingl
2019-03-15 21:40 ` Martin Blumenstingl
2019-03-16 14:37 ` Neil Armstrong
2019-03-16 14:37 ` Neil Armstrong
2019-03-16 14:37 ` Neil Armstrong
2019-03-07 15:13 ` [PATCH 9/9] arm64: dts: meson: g12a: Add mali-g31 gpu node Neil Armstrong
2019-03-07 15:13 ` Neil Armstrong
2019-03-07 15:13 ` Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7h36nru744.fsf@baylibre.com \
--to=khilman@baylibre.com \
--cc=jbrunet@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=narmstrong@baylibre.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.