[PATCH 00/12] add missing of_node_put after of_device_is_available

[PATCH 00/12] add missing of_node_put after of_device_is_available

[Julia Lawall]

Failure of of_device_is_available implies that the device node
should be put, if it is not used otherwise.

---

 arch/arm/mach-omap2/display.c                            |    4 +++-
 arch/powerpc/platforms/83xx/usb.c                        |    4 +++-
 drivers/bus/arm-cci.c                                    |    4 +++-
 drivers/cpufreq/armada-8k-cpufreq.c                      |    4 +++-
 drivers/crypto/amcc/crypto4xx_trng.c                     |    4 +++-
 drivers/firmware/psci.c                                  |    4 +++-
 drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c          |    4 +++-
 drivers/gpu/drm/tegra/rgb.c                              |    4 +++-
 drivers/phy/tegra/xusb.c                                 |    4 +++-
 drivers/soc/amlogic/meson-gx-socinfo.c                   |    4 +++-
 drivers/tee/optee/core.c                                 |    4 +++-
 drivers/video/fbdev/omap2/omapfb/dss/omapdss-boot-init.c |    4 +++-
 12 files changed, 36 insertions(+), 12 deletions(-)

[PATCH 00/12] add missing of_node_put after of_device_is_available

[Julia Lawall]

Failure of of_device_is_available implies that the device node
should be put, if it is not used otherwise.

---

 arch/arm/mach-omap2/display.c                            |    4 +++-
 arch/powerpc/platforms/83xx/usb.c                        |    4 +++-
 drivers/bus/arm-cci.c                                    |    4 +++-
 drivers/cpufreq/armada-8k-cpufreq.c                      |    4 +++-
 drivers/crypto/amcc/crypto4xx_trng.c                     |    4 +++-
 drivers/firmware/psci.c                                  |    4 +++-
 drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c          |    4 +++-
 drivers/gpu/drm/tegra/rgb.c                              |    4 +++-
 drivers/phy/tegra/xusb.c                                 |    4 +++-
 drivers/soc/amlogic/meson-gx-socinfo.c                   |    4 +++-
 drivers/tee/optee/core.c                                 |    4 +++-
 drivers/video/fbdev/omap2/omapfb/dss/omapdss-boot-init.c |    4 +++-
 12 files changed, 36 insertions(+), 12 deletions(-)

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 00/12] add missing of_node_put after of_device_is_available

[Julia Lawall]

Failure of of_device_is_available implies that the device node
should be put, if it is not used otherwise.

---

 arch/arm/mach-omap2/display.c                            |    4 +++-
 arch/powerpc/platforms/83xx/usb.c                        |    4 +++-
 drivers/bus/arm-cci.c                                    |    4 +++-
 drivers/cpufreq/armada-8k-cpufreq.c                      |    4 +++-
 drivers/crypto/amcc/crypto4xx_trng.c                     |    4 +++-
 drivers/firmware/psci.c                                  |    4 +++-
 drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c          |    4 +++-
 drivers/gpu/drm/tegra/rgb.c                              |    4 +++-
 drivers/phy/tegra/xusb.c                                 |    4 +++-
 drivers/soc/amlogic/meson-gx-socinfo.c                   |    4 +++-
 drivers/tee/optee/core.c                                 |    4 +++-
 drivers/video/fbdev/omap2/omapfb/dss/omapdss-boot-init.c |    4 +++-
 12 files changed, 36 insertions(+), 12 deletions(-)

[PATCH 00/12] add missing of_node_put after of_device_is_available

[Julia Lawall]

Failure of of_device_is_available implies that the device node
should be put, if it is not used otherwise.

---

 arch/arm/mach-omap2/display.c                            |    4 +++-
 arch/powerpc/platforms/83xx/usb.c                        |    4 +++-
 drivers/bus/arm-cci.c                                    |    4 +++-
 drivers/cpufreq/armada-8k-cpufreq.c                      |    4 +++-
 drivers/crypto/amcc/crypto4xx_trng.c                     |    4 +++-
 drivers/firmware/psci.c                                  |    4 +++-
 drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c          |    4 +++-
 drivers/gpu/drm/tegra/rgb.c                              |    4 +++-
 drivers/phy/tegra/xusb.c                                 |    4 +++-
 drivers/soc/amlogic/meson-gx-socinfo.c                   |    4 +++-
 drivers/tee/optee/core.c                                 |    4 +++-
 drivers/video/fbdev/omap2/omapfb/dss/omapdss-boot-init.c |    4 +++-
 12 files changed, 36 insertions(+), 12 deletions(-)

[PATCH 00/12] add missing of_node_put after of_device_is_available

[Julia Lawall]

Failure of of_device_is_available implies that the device node
should be put, if it is not used otherwise.

---

 arch/arm/mach-omap2/display.c                            |    4 +++-
 arch/powerpc/platforms/83xx/usb.c                        |    4 +++-
 drivers/bus/arm-cci.c                                    |    4 +++-
 drivers/cpufreq/armada-8k-cpufreq.c                      |    4 +++-
 drivers/crypto/amcc/crypto4xx_trng.c                     |    4 +++-
 drivers/firmware/psci.c                                  |    4 +++-
 drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c          |    4 +++-
 drivers/gpu/drm/tegra/rgb.c                              |    4 +++-
 drivers/phy/tegra/xusb.c                                 |    4 +++-
 drivers/soc/amlogic/meson-gx-socinfo.c                   |    4 +++-
 drivers/tee/optee/core.c                                 |    4 +++-
 drivers/video/fbdev/omap2/omapfb/dss/omapdss-boot-init.c |    4 +++-
 12 files changed, 36 insertions(+), 12 deletions(-)

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 01/12] arm-cci: add missing of_node_put after of_device_is_available

[Julia Lawall]

Add an of_node_put when a tested device node is not available.

The semantic patch that fixes this problem is as follows
(http://coccinelle.lip6.fr):

// <smpl>
@@
identifier f;
local idexpression e;
expression x;
@@

e = f(...);
... when != of_node_put(e)
    when != x = e
    when != e = x
    when any
if (<+...of_device_is_available(e)...+>) {
  ... when != of_node_put(e)
(
  return e;
|
+ of_node_put(e);
  return ...;
)
}
// </smpl>

Fixes: 896ddd600ba4 ("drivers: bus: check cci device tree node status")
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>

---
This file doesn't seem to have a maintainer.

 drivers/bus/arm-cci.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff -u -p a/drivers/bus/arm-cci.c b/drivers/bus/arm-cci.c
--- a/drivers/bus/arm-cci.c
+++ b/drivers/bus/arm-cci.c
@@ -538,8 +538,10 @@ static int cci_probe(void)
 	struct resource res;
 
 	np = of_find_matching_node(NULL, arm_cci_matches);
-	if (!of_device_is_available(np))
+	if (!of_device_is_available(np)) {
+		of_node_put(np);
 		return -ENODEV;
+	}
 
 	ret = of_address_to_resource(np, 0, &res);
 	if (!ret) {

[PATCH 01/12] arm-cci: add missing of_node_put after of_device_is_available

[Julia Lawall]

Add an of_node_put when a tested device node is not available.

The semantic patch that fixes this problem is as follows
(http://coccinelle.lip6.fr):

// <smpl>
@@
identifier f;
local idexpression e;
expression x;
@@

e = f(...);
... when != of_node_put(e)
    when != x = e
    when != e = x
    when any
if (<+...of_device_is_available(e)...+>) {
  ... when != of_node_put(e)
(
  return e;
|
+ of_node_put(e);
  return ...;
)
}
// </smpl>

Fixes: 896ddd600ba4 ("drivers: bus: check cci device tree node status")
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>

---
This file doesn't seem to have a maintainer.

 drivers/bus/arm-cci.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff -u -p a/drivers/bus/arm-cci.c b/drivers/bus/arm-cci.c
--- a/drivers/bus/arm-cci.c
+++ b/drivers/bus/arm-cci.c
@@ -538,8 +538,10 @@ static int cci_probe(void)
 	struct resource res;
 
 	np = of_find_matching_node(NULL, arm_cci_matches);
-	if (!of_device_is_available(np))
+	if (!of_device_is_available(np)) {
+		of_node_put(np);
 		return -ENODEV;
+	}
 
 	ret = of_address_to_resource(np, 0, &res);
 	if (!ret) {

Re: [PATCH 01/12] arm-cci: add missing of_node_put after of_device_is_available

[Mukesh Ojha]

On 2/23/2019 6:50 PM, Julia Lawall wrote:
> Add an of_node_put when a tested device node is not available.
>
> The semantic patch that fixes this problem is as follows
> (http://coccinelle.lip6.fr):
>
> // <smpl>
> @@
> identifier f;
> local idexpression e;
> expression x;
> @@
>
> e = f(...);
> ... when != of_node_put(e)
>      when != x = e
>      when != e = x
>      when any
> if (<+...of_device_is_available(e)...+>) {
>    ... when != of_node_put(e)
> (
>    return e;
> |
> + of_node_put(e);
>    return ...;
> )
> }
> // </smpl>
>
> Fixes: 896ddd600ba4 ("drivers: bus: check cci device tree node status")
> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>


Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>

Cheers,
-Mukesh

>
> ---
> This file doesn't seem to have a maintainer.
>
>   drivers/bus/arm-cci.c |    4 +++-
>   1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff -u -p a/drivers/bus/arm-cci.c b/drivers/bus/arm-cci.c
> --- a/drivers/bus/arm-cci.c
> +++ b/drivers/bus/arm-cci.c
> @@ -538,8 +538,10 @@ static int cci_probe(void)
>   	struct resource res;
>   
>   	np = of_find_matching_node(NULL, arm_cci_matches);
> -	if (!of_device_is_available(np))
> +	if (!of_device_is_available(np)) {
> +		of_node_put(np);
>   		return -ENODEV;
> +	}
>   
>   	ret = of_address_to_resource(np, 0, &res);
>   	if (!ret) {
>

Re: [PATCH 01/12] arm-cci: add missing of_node_put after of_device_is_available

[Mukesh Ojha]

On 2/23/2019 6:50 PM, Julia Lawall wrote:
> Add an of_node_put when a tested device node is not available.
>
> The semantic patch that fixes this problem is as follows
> (http://coccinelle.lip6.fr):
>
> // <smpl>
> @@
> identifier f;
> local idexpression e;
> expression x;
> @@
>
> e = f(...);
> ... when != of_node_put(e)
>      when != x = e
>      when != e = x
>      when any
> if (<+...of_device_is_available(e)...+>) {
>    ... when != of_node_put(e)
> (
>    return e;
> |
> + of_node_put(e);
>    return ...;
> )
> }
> // </smpl>
>
> Fixes: 896ddd600ba4 ("drivers: bus: check cci device tree node status")
> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>


Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>

Cheers,
-Mukesh

>
> ---
> This file doesn't seem to have a maintainer.
>
>   drivers/bus/arm-cci.c |    4 +++-
>   1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff -u -p a/drivers/bus/arm-cci.c b/drivers/bus/arm-cci.c
> --- a/drivers/bus/arm-cci.c
> +++ b/drivers/bus/arm-cci.c
> @@ -538,8 +538,10 @@ static int cci_probe(void)
>   	struct resource res;
>   
>   	np = of_find_matching_node(NULL, arm_cci_matches);
> -	if (!of_device_is_available(np))
> +	if (!of_device_is_available(np)) {
> +		of_node_put(np);
>   		return -ENODEV;
> +	}
>   
>   	ret = of_address_to_resource(np, 0, &res);
>   	if (!ret) {
>

Re: [PATCH 01/12] arm-cci: add missing of_node_put after of_device_is_available

[Markus Elfring]

> @@ -538,8 +538,10 @@  static int cci_probe(void)
>  	struct resource res;
>
>  	np = of_find_matching_node(NULL, arm_cci_matches);
> -	if (!of_device_is_available(np))
> +	if (!of_device_is_available(np)) {
> +		of_node_put(np);
>  		return -ENODEV;
> +	}
>
>  	ret = of_address_to_resource(np, 0, &res);
>  	if (!ret) {

How do you think about to move this function call to an additional jump target
for the desired exception handling?

Regards,
Markus

Re: [PATCH 01/12] arm-cci: add missing of_node_put after of_device_is_available

[Markus Elfring]

> @@ -538,8 +538,10 @@  static int cci_probe(void)
>  	struct resource res;
>
>  	np = of_find_matching_node(NULL, arm_cci_matches);
> -	if (!of_device_is_available(np))
> +	if (!of_device_is_available(np)) {
> +		of_node_put(np);
>  		return -ENODEV;
> +	}
>
>  	ret = of_address_to_resource(np, 0, &res);
>  	if (!ret) {

How do you think about to move this function call to an additional jump target
for the desired exception handling?

Regards,
Markus

Re: [PATCH 01/12] arm-cci: add missing of_node_put after of_device_is_available

[Robin Murphy]

On 14/04/2019 15:45, Markus Elfring wrote:
>> @@ -538,8 +538,10 @@  static int cci_probe(void)
>>   	struct resource res;
>>
>>   	np = of_find_matching_node(NULL, arm_cci_matches);
>> -	if (!of_device_is_available(np))
>> +	if (!of_device_is_available(np)) {
>> +		of_node_put(np);
>>   		return -ENODEV;
>> +	}
>>
>>   	ret = of_address_to_resource(np, 0, &res);
>>   	if (!ret) {
> 
> How do you think about to move this function call to an additional jump target
> for the desired exception handling?

TBH it looks like the whole thing could do with a bit of refactoring - 
strictly we should probably be dropping the node reference in all the 
other failure paths too.

Robin.

Re: [PATCH 01/12] arm-cci: add missing of_node_put after of_device_is_available

[Robin Murphy]

On 14/04/2019 15:45, Markus Elfring wrote:
>> @@ -538,8 +538,10 @@  static int cci_probe(void)
>>   	struct resource res;
>>
>>   	np = of_find_matching_node(NULL, arm_cci_matches);
>> -	if (!of_device_is_available(np))
>> +	if (!of_device_is_available(np)) {
>> +		of_node_put(np);
>>   		return -ENODEV;
>> +	}
>>
>>   	ret = of_address_to_resource(np, 0, &res);
>>   	if (!ret) {
> 
> How do you think about to move this function call to an additional jump target
> for the desired exception handling?

TBH it looks like the whole thing could do with a bit of refactoring - 
strictly we should probably be dropping the node reference in all the 
other failure paths too.

Robin.

[PATCH 02/12] drm/tegra: rgb: add missing of_node_put after of_device_is_available

[Julia Lawall]

Add an of_node_put when a tested device node is not available.

The semantic patch that fixes this problem is as follows
(http://coccinelle.lip6.fr):

// <smpl>
@@
identifier f;
local idexpression e;
expression x;
@@

e = f(...);
... when != of_node_put(e)
    when != x = e
    when != e = x
    when any
if (<+...of_device_is_available(e)...+>) {
  ... when != of_node_put(e)
(
  return e;
|
+ of_node_put(e);
  return ...;
)
}
// </smpl>

Fixes: d8f4a9eda0067 ("drm: Add NVIDIA Tegra20 support")
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>

---
 drivers/gpu/drm/tegra/rgb.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff -u -p a/drivers/gpu/drm/tegra/rgb.c b/drivers/gpu/drm/tegra/rgb.c
--- a/drivers/gpu/drm/tegra/rgb.c
+++ b/drivers/gpu/drm/tegra/rgb.c
@@ -221,8 +221,10 @@ int tegra_dc_rgb_probe(struct tegra_dc *
 	int err;
 
 	np = of_get_child_by_name(dc->dev->of_node, "rgb");
-	if (!np || !of_device_is_available(np))
+	if (!np || !of_device_is_available(np)) {
+		of_node_put(np);
 		return -ENODEV;
+	}
 
 	rgb = devm_kzalloc(dc->dev, sizeof(*rgb), GFP_KERNEL);
 	if (!rgb)

[PATCH 02/12] drm/tegra: rgb: add missing of_node_put after of_device_is_available

[Julia Lawall]

Add an of_node_put when a tested device node is not available.

The semantic patch that fixes this problem is as follows
(http://coccinelle.lip6.fr):

// <smpl>
@@
identifier f;
local idexpression e;
expression x;
@@

e = f(...);
... when != of_node_put(e)
    when != x = e
    when != e = x
    when any
if (<+...of_device_is_available(e)...+>) {
  ... when != of_node_put(e)
(
  return e;
|
+ of_node_put(e);
  return ...;
)
}
// </smpl>

Fixes: d8f4a9eda0067 ("drm: Add NVIDIA Tegra20 support")
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>

---
 drivers/gpu/drm/tegra/rgb.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff -u -p a/drivers/gpu/drm/tegra/rgb.c b/drivers/gpu/drm/tegra/rgb.c
--- a/drivers/gpu/drm/tegra/rgb.c
+++ b/drivers/gpu/drm/tegra/rgb.c
@@ -221,8 +221,10 @@ int tegra_dc_rgb_probe(struct tegra_dc *
 	int err;
 
 	np = of_get_child_by_name(dc->dev->of_node, "rgb");
-	if (!np || !of_device_is_available(np))
+	if (!np || !of_device_is_available(np)) {
+		of_node_put(np);
 		return -ENODEV;
+	}
 
 	rgb = devm_kzalloc(dc->dev, sizeof(*rgb), GFP_KERNEL);
 	if (!rgb)

Re: [PATCH 02/12] drm/tegra: rgb: add missing of_node_put after of_device_is_available

[Mukesh Ojha]

On 2/23/2019 6:50 PM, Julia Lawall wrote:
> Add an of_node_put when a tested device node is not available.
>
> The semantic patch that fixes this problem is as follows
> (http://coccinelle.lip6.fr):
>
> // <smpl>
> @@
> identifier f;
> local idexpression e;
> expression x;
> @@
>
> e = f(...);
> ... when != of_node_put(e)
>      when != x = e
>      when != e = x
>      when any
> if (<+...of_device_is_available(e)...+>) {
>    ... when != of_node_put(e)
> (
>    return e;
> |
> + of_node_put(e);
>    return ...;
> )
> }
> // </smpl>
>
> Fixes: d8f4a9eda0067 ("drm: Add NVIDIA Tegra20 support")
> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>

Cheers,
-Mukesh
>
> ---
>   drivers/gpu/drm/tegra/rgb.c |    4 +++-
>   1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff -u -p a/drivers/gpu/drm/tegra/rgb.c b/drivers/gpu/drm/tegra/rgb.c
> --- a/drivers/gpu/drm/tegra/rgb.c
> +++ b/drivers/gpu/drm/tegra/rgb.c
> @@ -221,8 +221,10 @@ int tegra_dc_rgb_probe(struct tegra_dc *
>   	int err;
>   
>   	np = of_get_child_by_name(dc->dev->of_node, "rgb");
> -	if (!np || !of_device_is_available(np))
> +	if (!np || !of_device_is_available(np)) {
> +		of_node_put(np);
>   		return -ENODEV;
> +	}
>   
>   	rgb = devm_kzalloc(dc->dev, sizeof(*rgb), GFP_KERNEL);
>   	if (!rgb)
>

Re: [PATCH 02/12] drm/tegra: rgb: add missing of_node_put after of_device_is_available

[Mukesh Ojha]

On 2/23/2019 6:50 PM, Julia Lawall wrote:
> Add an of_node_put when a tested device node is not available.
>
> The semantic patch that fixes this problem is as follows
> (http://coccinelle.lip6.fr):
>
> // <smpl>
> @@
> identifier f;
> local idexpression e;
> expression x;
> @@
>
> e = f(...);
> ... when != of_node_put(e)
>      when != x = e
>      when != e = x
>      when any
> if (<+...of_device_is_available(e)...+>) {
>    ... when != of_node_put(e)
> (
>    return e;
> |
> + of_node_put(e);
>    return ...;
> )
> }
> // </smpl>
>
> Fixes: d8f4a9eda0067 ("drm: Add NVIDIA Tegra20 support")
> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>

Cheers,
-Mukesh
>
> ---
>   drivers/gpu/drm/tegra/rgb.c |    4 +++-
>   1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff -u -p a/drivers/gpu/drm/tegra/rgb.c b/drivers/gpu/drm/tegra/rgb.c
> --- a/drivers/gpu/drm/tegra/rgb.c
> +++ b/drivers/gpu/drm/tegra/rgb.c
> @@ -221,8 +221,10 @@ int tegra_dc_rgb_probe(struct tegra_dc *
>   	int err;
>   
>   	np = of_get_child_by_name(dc->dev->of_node, "rgb");
> -	if (!np || !of_device_is_available(np))
> +	if (!np || !of_device_is_available(np)) {
> +		of_node_put(np);
>   		return -ENODEV;
> +	}
>   
>   	rgb = devm_kzalloc(dc->dev, sizeof(*rgb), GFP_KERNEL);
>   	if (!rgb)
>

Re: [PATCH 02/12] drm/tegra: rgb: add missing of_node_put after of_device_is_available

[Markus Elfring]

> @@ -221,8 +221,10 @@  int tegra_dc_rgb_probe(struct tegra_dc *
>  	int err;
>
>  	np = of_get_child_by_name(dc->dev->of_node, "rgb");
> -	if (!np || !of_device_is_available(np))
> +	if (!np || !of_device_is_available(np)) {
> +		of_node_put(np);
>  		return -ENODEV;
> +	}
>
>  	rgb = devm_kzalloc(dc->dev, sizeof(*rgb), GFP_KERNEL);
>  	if (!rgb)

How do you think about to move this function call to an additional jump target
for the desired exception handling?

Regards,
Markus

Re: [PATCH 02/12] drm/tegra: rgb: add missing of_node_put after of_device_is_available

[Markus Elfring]

> @@ -221,8 +221,10 @@  int tegra_dc_rgb_probe(struct tegra_dc *
>  	int err;
>
>  	np = of_get_child_by_name(dc->dev->of_node, "rgb");
> -	if (!np || !of_device_is_available(np))
> +	if (!np || !of_device_is_available(np)) {
> +		of_node_put(np);
>  		return -ENODEV;
> +	}
>
>  	rgb = devm_kzalloc(dc->dev, sizeof(*rgb), GFP_KERNEL);
>  	if (!rgb)

How do you think about to move this function call to an additional jump target
for the desired exception handling?

Regards,
Markus

[PATCH 03/12] PowerPC-83xx: add missing of_node_put after of_device_is_available

[Julia Lawall]

Add an of_node_put when a tested device node is not available.

The semantic patch that fixes this problem is as follows
(http://coccinelle.lip6.fr):

// <smpl>
@@
identifier f;
local idexpression e;
expression x;
@@

e = f(...);
... when != of_node_put(e)
    when != x = e
    when != e = x
    when any
if (<+...of_device_is_available(e)...+>) {
  ... when != of_node_put(e)
(
  return e;
|
+ of_node_put(e);
  return ...;
)
}
// </smpl>

Fixes: c026c98739c7e ("powerpc/83xx: Do not configure or probe disabled FSL DR USB controllers")
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>

---
 arch/powerpc/platforms/83xx/usb.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff -u -p a/arch/powerpc/platforms/83xx/usb.c b/arch/powerpc/platforms/83xx/usb.c
--- a/arch/powerpc/platforms/83xx/usb.c
+++ b/arch/powerpc/platforms/83xx/usb.c
@@ -221,8 +221,10 @@ int mpc837x_usb_cfg(void)
 	int ret = 0;
 
 	np = of_find_compatible_node(NULL, NULL, "fsl-usb2-dr");
-	if (!np || !of_device_is_available(np))
+	if (!np || !of_device_is_available(np)) {
+		of_node_put(np);
 		return -ENODEV;
+	}
 	prop = of_get_property(np, "phy_type", NULL);
 
 	if (!prop || (strcmp(prop, "ulpi") && strcmp(prop, "serial"))) {

[PATCH 03/12] PowerPC-83xx: add missing of_node_put after of_device_is_available

[Julia Lawall]

Add an of_node_put when a tested device node is not available.

The semantic patch that fixes this problem is as follows
(http://coccinelle.lip6.fr):

// <smpl>
@@
identifier f;
local idexpression e;
expression x;
@@

e = f(...);
... when != of_node_put(e)
    when != x = e
    when != e = x
    when any
if (<+...of_device_is_available(e)...+>) {
  ... when != of_node_put(e)
(
  return e;
|
+ of_node_put(e);
  return ...;
)
}
// </smpl>

Fixes: c026c98739c7e ("powerpc/83xx: Do not configure or probe disabled FSL DR USB controllers")
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>

---
 arch/powerpc/platforms/83xx/usb.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff -u -p a/arch/powerpc/platforms/83xx/usb.c b/arch/powerpc/platforms/83xx/usb.c
--- a/arch/powerpc/platforms/83xx/usb.c
+++ b/arch/powerpc/platforms/83xx/usb.c
@@ -221,8 +221,10 @@ int mpc837x_usb_cfg(void)
 	int ret = 0;
 
 	np = of_find_compatible_node(NULL, NULL, "fsl-usb2-dr");
-	if (!np || !of_device_is_available(np))
+	if (!np || !of_device_is_available(np)) {
+		of_node_put(np);
 		return -ENODEV;
+	}
 	prop = of_get_property(np, "phy_type", NULL);
 
 	if (!prop || (strcmp(prop, "ulpi") && strcmp(prop, "serial"))) {

[PATCH 03/12] PowerPC-83xx: add missing of_node_put after of_device_is_available

[Julia Lawall]

Add an of_node_put when a tested device node is not available.

The semantic patch that fixes this problem is as follows
(http://coccinelle.lip6.fr):

// <smpl>
@@
identifier f;
local idexpression e;
expression x;
@@

e = f(...);
... when != of_node_put(e)
    when != x = e
    when != e = x
    when any
if (<+...of_device_is_available(e)...+>) {
  ... when != of_node_put(e)
(
  return e;
|
+ of_node_put(e);
  return ...;
)
}
// </smpl>

Fixes: c026c98739c7e ("powerpc/83xx: Do not configure or probe disabled FSL DR USB controllers")
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>

---
 arch/powerpc/platforms/83xx/usb.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff -u -p a/arch/powerpc/platforms/83xx/usb.c b/arch/powerpc/platforms/83xx/usb.c
--- a/arch/powerpc/platforms/83xx/usb.c
+++ b/arch/powerpc/platforms/83xx/usb.c
@@ -221,8 +221,10 @@ int mpc837x_usb_cfg(void)
 	int ret = 0;
 
 	np = of_find_compatible_node(NULL, NULL, "fsl-usb2-dr");
-	if (!np || !of_device_is_available(np))
+	if (!np || !of_device_is_available(np)) {
+		of_node_put(np);
 		return -ENODEV;
+	}
 	prop = of_get_property(np, "phy_type", NULL);
 
 	if (!prop || (strcmp(prop, "ulpi") && strcmp(prop, "serial"))) {

Re: [PATCH 03/12] PowerPC-83xx: add missing of_node_put after of_device_is_available

[Mukesh Ojha]

On 2/23/2019 6:50 PM, Julia Lawall wrote:
> Add an of_node_put when a tested device node is not available.
>
> The semantic patch that fixes this problem is as follows
> (http://coccinelle.lip6.fr):
>
> // <smpl>
> @@
> identifier f;
> local idexpression e;
> expression x;
> @@
>
> e = f(...);
> ... when != of_node_put(e)
>      when != x = e
>      when != e = x
>      when any
> if (<+...of_device_is_available(e)...+>) {
>    ... when != of_node_put(e)
> (
>    return e;
> |
> + of_node_put(e);
>    return ...;
> )
> }
> // </smpl>
>
> Fixes: c026c98739c7e ("powerpc/83xx: Do not configure or probe disabled FSL DR USB controllers")
> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>

Cheers,
-Mukesh
>
> ---
>   arch/powerpc/platforms/83xx/usb.c |    4 +++-
>   1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff -u -p a/arch/powerpc/platforms/83xx/usb.c b/arch/powerpc/platforms/83xx/usb.c
> --- a/arch/powerpc/platforms/83xx/usb.c
> +++ b/arch/powerpc/platforms/83xx/usb.c
> @@ -221,8 +221,10 @@ int mpc837x_usb_cfg(void)
>   	int ret = 0;
>   
>   	np = of_find_compatible_node(NULL, NULL, "fsl-usb2-dr");
> -	if (!np || !of_device_is_available(np))
> +	if (!np || !of_device_is_available(np)) {
> +		of_node_put(np);
>   		return -ENODEV;
> +	}
>   	prop = of_get_property(np, "phy_type", NULL);
>   
>   	if (!prop || (strcmp(prop, "ulpi") && strcmp(prop, "serial"))) {
>

Re: [PATCH 03/12] PowerPC-83xx: add missing of_node_put after of_device_is_available

[Mukesh Ojha]

On 2/23/2019 6:50 PM, Julia Lawall wrote:
> Add an of_node_put when a tested device node is not available.
>
> The semantic patch that fixes this problem is as follows
> (http://coccinelle.lip6.fr):
>
> // <smpl>
> @@
> identifier f;
> local idexpression e;
> expression x;
> @@
>
> e = f(...);
> ... when != of_node_put(e)
>      when != x = e
>      when != e = x
>      when any
> if (<+...of_device_is_available(e)...+>) {
>    ... when != of_node_put(e)
> (
>    return e;
> |
> + of_node_put(e);
>    return ...;
> )
> }
> // </smpl>
>
> Fixes: c026c98739c7e ("powerpc/83xx: Do not configure or probe disabled FSL DR USB controllers")
> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>

Cheers,
-Mukesh
>
> ---
>   arch/powerpc/platforms/83xx/usb.c |    4 +++-
>   1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff -u -p a/arch/powerpc/platforms/83xx/usb.c b/arch/powerpc/platforms/83xx/usb.c
> --- a/arch/powerpc/platforms/83xx/usb.c
> +++ b/arch/powerpc/platforms/83xx/usb.c
> @@ -221,8 +221,10 @@ int mpc837x_usb_cfg(void)
>   	int ret = 0;
>   
>   	np = of_find_compatible_node(NULL, NULL, "fsl-usb2-dr");
> -	if (!np || !of_device_is_available(np))
> +	if (!np || !of_device_is_available(np)) {
> +		of_node_put(np);
>   		return -ENODEV;
> +	}
>   	prop = of_get_property(np, "phy_type", NULL);
>   
>   	if (!prop || (strcmp(prop, "ulpi") && strcmp(prop, "serial"))) {
>

Re: [PATCH 03/12] PowerPC-83xx: add missing of_node_put after of_device_is_available

[Mukesh Ojha]

On 2/23/2019 6:50 PM, Julia Lawall wrote:
> Add an of_node_put when a tested device node is not available.
>
> The semantic patch that fixes this problem is as follows
> (http://coccinelle.lip6.fr):
>
> // <smpl>
> @@
> identifier f;
> local idexpression e;
> expression x;
> @@
>
> e = f(...);
> ... when != of_node_put(e)
>      when != x = e
>      when != e = x
>      when any
> if (<+...of_device_is_available(e)...+>) {
>    ... when != of_node_put(e)
> (
>    return e;
> |
> + of_node_put(e);
>    return ...;
> )
> }
> // </smpl>
>
> Fixes: c026c98739c7e ("powerpc/83xx: Do not configure or probe disabled FSL DR USB controllers")
> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>

Cheers,
-Mukesh
>
> ---
>   arch/powerpc/platforms/83xx/usb.c |    4 +++-
>   1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff -u -p a/arch/powerpc/platforms/83xx/usb.c b/arch/powerpc/platforms/83xx/usb.c
> --- a/arch/powerpc/platforms/83xx/usb.c
> +++ b/arch/powerpc/platforms/83xx/usb.c
> @@ -221,8 +221,10 @@ int mpc837x_usb_cfg(void)
>   	int ret = 0;
>   
>   	np = of_find_compatible_node(NULL, NULL, "fsl-usb2-dr");
> -	if (!np || !of_device_is_available(np))
> +	if (!np || !of_device_is_available(np)) {
> +		of_node_put(np);
>   		return -ENODEV;
> +	}
>   	prop = of_get_property(np, "phy_type", NULL);
>   
>   	if (!prop || (strcmp(prop, "ulpi") && strcmp(prop, "serial"))) {
>

Re: [PATCH 03/12] PowerPC-83xx: add missing of_node_put after of_device_is_available

[Markus Elfring]

> @@ -221,8 +221,10 @@ int mpc837x_usb_cfg(void)
>  	int ret = 0;
>
>  	np = of_find_compatible_node(NULL, NULL, "fsl-usb2-dr");
> -	if (!np || !of_device_is_available(np))
> +	if (!np || !of_device_is_available(np)) {
> +		of_node_put(np);
>  		return -ENODEV;
> +	}
>  	prop = of_get_property(np, "phy_type", NULL);
>
>  	if (!prop || (strcmp(prop, "ulpi") && strcmp(prop, "serial"))) {

How do you think about to adjust the exception handling in this function
implementation a bit more according to the Linux coding style?

Regards,
Markus

Re: [PATCH 03/12] PowerPC-83xx: add missing of_node_put after of_device_is_available

[Markus Elfring]

> @@ -221,8 +221,10 @@ int mpc837x_usb_cfg(void)
>  	int ret = 0;
>
>  	np = of_find_compatible_node(NULL, NULL, "fsl-usb2-dr");
> -	if (!np || !of_device_is_available(np))
> +	if (!np || !of_device_is_available(np)) {
> +		of_node_put(np);
>  		return -ENODEV;
> +	}
>  	prop = of_get_property(np, "phy_type", NULL);
>
>  	if (!prop || (strcmp(prop, "ulpi") && strcmp(prop, "serial"))) {

How do you think about to adjust the exception handling in this function
implementation a bit more according to the Linux coding style?

Regards,
Markus

Re: [PATCH 03/12] PowerPC-83xx: add missing of_node_put after of_device_is_available

[Markus Elfring]

> @@ -221,8 +221,10 @@ int mpc837x_usb_cfg(void)
>  	int ret = 0;
>
>  	np = of_find_compatible_node(NULL, NULL, "fsl-usb2-dr");
> -	if (!np || !of_device_is_available(np))
> +	if (!np || !of_device_is_available(np)) {
> +		of_node_put(np);
>  		return -ENODEV;
> +	}
>  	prop = of_get_property(np, "phy_type", NULL);
>
>  	if (!prop || (strcmp(prop, "ulpi") && strcmp(prop, "serial"))) {

How do you think about to adjust the exception handling in this function
implementation a bit more according to the Linux coding style?

Regards,
Markus

[PATCH 04/12] phy: tegra: add missing of_node_put after of_device_is_available

[Julia Lawall]

Add an of_node_put when a tested device node is not available.

The semantic patch that fixes this problem is as follows
(http://coccinelle.lip6.fr):

// <smpl>
@@
identifier f;
local idexpression e;
expression x;
@@

e = f(...);
... when != of_node_put(e)
    when != x = e
    when != e = x
    when any
if (<+...of_device_is_available(e)...+>) {
  ... when != of_node_put(e)
(
  return e;
|
+ of_node_put(e);
  return ...;
)
}
// </smpl>

Fixes: 53d2a715c2403 ("phy: Add Tegra XUSB pad controller support")
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>

---
 drivers/phy/tegra/xusb.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff -u -p a/drivers/phy/tegra/xusb.c b/drivers/phy/tegra/xusb.c
--- a/drivers/phy/tegra/xusb.c
+++ b/drivers/phy/tegra/xusb.c
@@ -260,8 +260,10 @@ tegra_xusb_pad_create(struct tegra_xusb_
 	int err;
 
 	np = tegra_xusb_find_pad_node(padctl, soc->name);
-	if (!np || !of_device_is_available(np))
+	if (!np || !of_device_is_available(np)) {
+		of_node_put(np);
 		return NULL;
+	}
 
 	pad = soc->ops->probe(padctl, soc, np);
 	if (IS_ERR(pad)) {

[PATCH 04/12] phy: tegra: add missing of_node_put after of_device_is_available

[Julia Lawall]

Add an of_node_put when a tested device node is not available.

The semantic patch that fixes this problem is as follows
(http://coccinelle.lip6.fr):

// <smpl>
@@
identifier f;
local idexpression e;
expression x;
@@

e = f(...);
... when != of_node_put(e)
    when != x = e
    when != e = x
    when any
if (<+...of_device_is_available(e)...+>) {
  ... when != of_node_put(e)
(
  return e;
|
+ of_node_put(e);
  return ...;
)
}
// </smpl>

Fixes: 53d2a715c2403 ("phy: Add Tegra XUSB pad controller support")
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>

---
 drivers/phy/tegra/xusb.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff -u -p a/drivers/phy/tegra/xusb.c b/drivers/phy/tegra/xusb.c
--- a/drivers/phy/tegra/xusb.c
+++ b/drivers/phy/tegra/xusb.c
@@ -260,8 +260,10 @@ tegra_xusb_pad_create(struct tegra_xusb_
 	int err;
 
 	np = tegra_xusb_find_pad_node(padctl, soc->name);
-	if (!np || !of_device_is_available(np))
+	if (!np || !of_device_is_available(np)) {
+		of_node_put(np);
 		return NULL;
+	}
 
 	pad = soc->ops->probe(padctl, soc, np);
 	if (IS_ERR(pad)) {

Re: [PATCH 04/12] phy: tegra: add missing of_node_put after of_device_is_available

[Mukesh Ojha]

On 2/23/2019 6:50 PM, Julia Lawall wrote:
> Add an of_node_put when a tested device node is not available.
>
> The semantic patch that fixes this problem is as follows
> (http://coccinelle.lip6.fr):
>
> // <smpl>
> @@
> identifier f;
> local idexpression e;
> expression x;
> @@
>
> e = f(...);
> ... when != of_node_put(e)
>      when != x = e
>      when != e = x
>      when any
> if (<+...of_device_is_available(e)...+>) {
>    ... when != of_node_put(e)
> (
>    return e;
> |
> + of_node_put(e);
>    return ...;
> )
> }
> // </smpl>
>
> Fixes: 53d2a715c2403 ("phy: Add Tegra XUSB pad controller support")
> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>

Cheers,
-Mukesh
>
> ---
>   drivers/phy/tegra/xusb.c |    4 +++-
>   1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff -u -p a/drivers/phy/tegra/xusb.c b/drivers/phy/tegra/xusb.c
> --- a/drivers/phy/tegra/xusb.c
> +++ b/drivers/phy/tegra/xusb.c
> @@ -260,8 +260,10 @@ tegra_xusb_pad_create(struct tegra_xusb_
>   	int err;
>   
>   	np = tegra_xusb_find_pad_node(padctl, soc->name);
> -	if (!np || !of_device_is_available(np))
> +	if (!np || !of_device_is_available(np)) {
> +		of_node_put(np);
>   		return NULL;
> +	}
>   
>   	pad = soc->ops->probe(padctl, soc, np);
>   	if (IS_ERR(pad)) {
>

Re: [PATCH 04/12] phy: tegra: add missing of_node_put after of_device_is_available

[Mukesh Ojha]

On 2/23/2019 6:50 PM, Julia Lawall wrote:
> Add an of_node_put when a tested device node is not available.
>
> The semantic patch that fixes this problem is as follows
> (http://coccinelle.lip6.fr):
>
> // <smpl>
> @@
> identifier f;
> local idexpression e;
> expression x;
> @@
>
> e = f(...);
> ... when != of_node_put(e)
>      when != x = e
>      when != e = x
>      when any
> if (<+...of_device_is_available(e)...+>) {
>    ... when != of_node_put(e)
> (
>    return e;
> |
> + of_node_put(e);
>    return ...;
> )
> }
> // </smpl>
>
> Fixes: 53d2a715c2403 ("phy: Add Tegra XUSB pad controller support")
> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>

Cheers,
-Mukesh
>
> ---
>   drivers/phy/tegra/xusb.c |    4 +++-
>   1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff -u -p a/drivers/phy/tegra/xusb.c b/drivers/phy/tegra/xusb.c
> --- a/drivers/phy/tegra/xusb.c
> +++ b/drivers/phy/tegra/xusb.c
> @@ -260,8 +260,10 @@ tegra_xusb_pad_create(struct tegra_xusb_
>   	int err;
>   
>   	np = tegra_xusb_find_pad_node(padctl, soc->name);
> -	if (!np || !of_device_is_available(np))
> +	if (!np || !of_device_is_available(np)) {
> +		of_node_put(np);
>   		return NULL;
> +	}
>   
>   	pad = soc->ops->probe(padctl, soc, np);
>   	if (IS_ERR(pad)) {
>

Re: [PATCH 04/12] phy: tegra: add missing of_node_put after of_device_is_available

[Markus Elfring]

> @@ -260,8 +260,10 @@  tegra_xusb_pad_create(struct tegra_xusb_
>  	int err;
>
>  	np = tegra_xusb_find_pad_node(padctl, soc->name);
> -	if (!np || !of_device_is_available(np))
> +	if (!np || !of_device_is_available(np)) {
> +		of_node_put(np);
>  		return NULL;
> +	}
>
>  	pad = soc->ops->probe(padctl, soc, np);
>  	if (IS_ERR(pad)) {

How do you think about to move this function call to an additional jump target
for the desired exception handling?

Regards,
Markus

Re: [PATCH 04/12] phy: tegra: add missing of_node_put after of_device_is_available

[Markus Elfring]

> @@ -260,8 +260,10 @@  tegra_xusb_pad_create(struct tegra_xusb_
>  	int err;
>
>  	np = tegra_xusb_find_pad_node(padctl, soc->name);
> -	if (!np || !of_device_is_available(np))
> +	if (!np || !of_device_is_available(np)) {
> +		of_node_put(np);
>  		return NULL;
> +	}
>
>  	pad = soc->ops->probe(padctl, soc, np);
>  	if (IS_ERR(pad)) {

How do you think about to move this function call to an additional jump target
for the desired exception handling?

Regards,
Markus

[PATCH 05/12] tee: optee: add missing of_node_put after of_device_is_available

[Julia Lawall]

Add an of_node_put when a tested device node is not available.

The semantic patch that fixes this problem is as follows
(http://coccinelle.lip6.fr):

// <smpl>
@@
identifier f;
local idexpression e;
expression x;
@@

e = f(...);
... when != of_node_put(e)
    when != x = e
    when != e = x
    when any
if (<+...of_device_is_available(e)...+>) {
  ... when != of_node_put(e)
(
  return e;
|
+ of_node_put(e);
  return ...;
)
}
// </smpl>

Fixes: db878f76b9ff ("tee: optee: take DT status property into account")
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>

---
 drivers/tee/optee/core.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff -u -p a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c
--- a/drivers/tee/optee/core.c
+++ b/drivers/tee/optee/core.c
@@ -703,8 +703,10 @@ static int __init optee_driver_init(void
 		return -ENODEV;
 
 	np = of_find_matching_node(fw_np, optee_match);
-	if (!np || !of_device_is_available(np))
+	if (!np || !of_device_is_available(np)) {
+		of_node_put(np);
 		return -ENODEV;
+	}
 
 	optee = optee_probe(np);
 	of_node_put(np);

[PATCH 05/12] tee: optee: add missing of_node_put after of_device_is_available

[Julia Lawall]

Add an of_node_put when a tested device node is not available.

The semantic patch that fixes this problem is as follows
(http://coccinelle.lip6.fr):

// <smpl>
@@
identifier f;
local idexpression e;
expression x;
@@

e = f(...);
... when != of_node_put(e)
    when != x = e
    when != e = x
    when any
if (<+...of_device_is_available(e)...+>) {
  ... when != of_node_put(e)
(
  return e;
|
+ of_node_put(e);
  return ...;
)
}
// </smpl>

Fixes: db878f76b9ff ("tee: optee: take DT status property into account")
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>

---
 drivers/tee/optee/core.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff -u -p a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c
--- a/drivers/tee/optee/core.c
+++ b/drivers/tee/optee/core.c
@@ -703,8 +703,10 @@ static int __init optee_driver_init(void
 		return -ENODEV;
 
 	np = of_find_matching_node(fw_np, optee_match);
-	if (!np || !of_device_is_available(np))
+	if (!np || !of_device_is_available(np)) {
+		of_node_put(np);
 		return -ENODEV;
+	}
 
 	optee = optee_probe(np);
 	of_node_put(np);

Re: [PATCH 05/12] tee: optee: add missing of_node_put after of_device_is_available

[Jens Wiklander]

Hi Julia,
On Sat, Feb 23, 2019 at 2:58 PM Julia Lawall <Julia.Lawall@lip6.fr> wrote:
>
> Add an of_node_put when a tested device node is not available.
>
> The semantic patch that fixes this problem is as follows
> (http://coccinelle.lip6.fr):
>
> // <smpl>
> @@
> identifier f;
> local idexpression e;
> expression x;
> @@
>
> e = f(...);
> ... when != of_node_put(e)
>     when != x = e
>     when != e = x
>     when any
> if (<+...of_device_is_available(e)...+>) {
>   ... when != of_node_put(e)
> (
>   return e;
> |
> + of_node_put(e);
>   return ...;
> )
> }
> // </smpl>
>
> Fixes: db878f76b9ff ("tee: optee: take DT status property into account")
> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
>
> ---
>  drivers/tee/optee/core.c |    4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff -u -p a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c
> --- a/drivers/tee/optee/core.c
> +++ b/drivers/tee/optee/core.c
> @@ -703,8 +703,10 @@ static int __init optee_driver_init(void
>                 return -ENODEV;
>
>         np = of_find_matching_node(fw_np, optee_match);
> -       if (!np || !of_device_is_available(np))
> +       if (!np || !of_device_is_available(np)) {
> +               of_node_put(np);
>                 return -ENODEV;
> +       }
>
>         optee = optee_probe(np);
>         of_node_put(np);
>

Applied.

Thanks,
Jens

Re: [PATCH 05/12] tee: optee: add missing of_node_put after of_device_is_available

[Jens Wiklander]

Hi Julia,
On Sat, Feb 23, 2019 at 2:58 PM Julia Lawall <Julia.Lawall@lip6.fr> wrote:
>
> Add an of_node_put when a tested device node is not available.
>
> The semantic patch that fixes this problem is as follows
> (http://coccinelle.lip6.fr):
>
> // <smpl>
> @@
> identifier f;
> local idexpression e;
> expression x;
> @@
>
> e = f(...);
> ... when != of_node_put(e)
>     when != x = e
>     when != e = x
>     when any
> if (<+...of_device_is_available(e)...+>) {
>   ... when != of_node_put(e)
> (
>   return e;
> |
> + of_node_put(e);
>   return ...;
> )
> }
> // </smpl>
>
> Fixes: db878f76b9ff ("tee: optee: take DT status property into account")
> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
>
> ---
>  drivers/tee/optee/core.c |    4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff -u -p a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c
> --- a/drivers/tee/optee/core.c
> +++ b/drivers/tee/optee/core.c
> @@ -703,8 +703,10 @@ static int __init optee_driver_init(void
>                 return -ENODEV;
>
>         np = of_find_matching_node(fw_np, optee_match);
> -       if (!np || !of_device_is_available(np))
> +       if (!np || !of_device_is_available(np)) {
> +               of_node_put(np);
>                 return -ENODEV;
> +       }
>
>         optee = optee_probe(np);
>         of_node_put(np);
>

Applied.

Thanks,
Jens

[PATCH 06/12] omapfb: add missing of_node_put after of_device_is_available

[Julia Lawall]

Add an of_node_put when a tested device node is not available.

The semantic patch that fixes this problem is as follows
(http://coccinelle.lip6.fr):

// <smpl>
@@
identifier f;
local idexpression e;
expression x;
@@

e = f(...);
... when != of_node_put(e)
    when != x = e
    when != e = x
    when any
if (<+...of_device_is_available(e)...+>) {
  ... when != of_node_put(e)
(
  return e;
|
+ of_node_put(e);
  return ...;
)
}
// </smpl>

Fixes: f76ee892a99e6 ("omapfb: copy omapdss & displays for omapfb")
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>

---
 drivers/video/fbdev/omap2/omapfb/dss/omapdss-boot-init.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff -u -p a/drivers/video/fbdev/omap2/omapfb/dss/omapdss-boot-init.c b/drivers/video/fbdev/omap2/omapfb/dss/omapdss-boot-init.c
--- a/drivers/video/fbdev/omap2/omapfb/dss/omapdss-boot-init.c
+++ b/drivers/video/fbdev/omap2/omapfb/dss/omapdss-boot-init.c
@@ -193,8 +193,10 @@ static int __init omapdss_boot_init(void
 
 	dss = of_find_matching_node(NULL, omapdss_of_match);
 
-	if (dss = NULL || !of_device_is_available(dss))
+	if (dss = NULL || !of_device_is_available(dss)) {
+		of_node_put(dss);
 		return 0;
+	}
 
 	omapdss_walk_device(dss, true);
 

[PATCH 06/12] omapfb: add missing of_node_put after of_device_is_available

[Julia Lawall]

Add an of_node_put when a tested device node is not available.

The semantic patch that fixes this problem is as follows
(http://coccinelle.lip6.fr):

// <smpl>
@@
identifier f;
local idexpression e;
expression x;
@@

e = f(...);
... when != of_node_put(e)
    when != x = e
    when != e = x
    when any
if (<+...of_device_is_available(e)...+>) {
  ... when != of_node_put(e)
(
  return e;
|
+ of_node_put(e);
  return ...;
)
}
// </smpl>

Fixes: f76ee892a99e6 ("omapfb: copy omapdss & displays for omapfb")
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>

---
 drivers/video/fbdev/omap2/omapfb/dss/omapdss-boot-init.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff -u -p a/drivers/video/fbdev/omap2/omapfb/dss/omapdss-boot-init.c b/drivers/video/fbdev/omap2/omapfb/dss/omapdss-boot-init.c
--- a/drivers/video/fbdev/omap2/omapfb/dss/omapdss-boot-init.c
+++ b/drivers/video/fbdev/omap2/omapfb/dss/omapdss-boot-init.c
@@ -193,8 +193,10 @@ static int __init omapdss_boot_init(void
 
 	dss = of_find_matching_node(NULL, omapdss_of_match);
 
-	if (dss == NULL || !of_device_is_available(dss))
+	if (dss == NULL || !of_device_is_available(dss)) {
+		of_node_put(dss);
 		return 0;
+	}
 
 	omapdss_walk_device(dss, true);
 

Re: [PATCH 06/12] omapfb: add missing of_node_put after of_device_is_available

[Bartlomiej Zolnierkiewicz]

On 02/23/2019 02:20 PM, Julia Lawall wrote:
> Add an of_node_put when a tested device node is not available.
> 
> The semantic patch that fixes this problem is as follows
> (http://coccinelle.lip6.fr):
> 
> // <smpl>
> @@
> identifier f;
> local idexpression e;
> expression x;
> @@
> 
> e = f(...);
> ... when != of_node_put(e)
>     when != x = e
>     when != e = x
>     when any
> if (<+...of_device_is_available(e)...+>) {
>   ... when != of_node_put(e)
> (
>   return e;
> |
> + of_node_put(e);
>   return ...;
> )
> }
> // </smpl>
> 
> Fixes: f76ee892a99e6 ("omapfb: copy omapdss & displays for omapfb")
> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>

Patch queued for v5.2, thanks.

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics

Re: [PATCH 06/12] omapfb: add missing of_node_put after of_device_is_available

[Bartlomiej Zolnierkiewicz]

On 02/23/2019 02:20 PM, Julia Lawall wrote:
> Add an of_node_put when a tested device node is not available.
> 
> The semantic patch that fixes this problem is as follows
> (http://coccinelle.lip6.fr):
> 
> // <smpl>
> @@
> identifier f;
> local idexpression e;
> expression x;
> @@
> 
> e = f(...);
> ... when != of_node_put(e)
>     when != x = e
>     when != e = x
>     when any
> if (<+...of_device_is_available(e)...+>) {
>   ... when != of_node_put(e)
> (
>   return e;
> |
> + of_node_put(e);
>   return ...;
> )
> }
> // </smpl>
> 
> Fixes: f76ee892a99e6 ("omapfb: copy omapdss & displays for omapfb")
> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>

Patch queued for v5.2, thanks.

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics

[PATCH 07/12] drm: omapdrm: add missing of_node_put after of_device_is_available

[Julia Lawall]

Add an of_node_put when a tested device node is not available.

The semantic patch that fixes this problem is as follows
(http://coccinelle.lip6.fr):

// <smpl>
@@
identifier f;
local idexpression e;
expression x;
@@

e = f(...);
... when != of_node_put(e)
    when != x = e
    when != e = x
    when any
if (<+...of_device_is_available(e)...+>) {
  ... when != of_node_put(e)
(
  return e;
|
+ of_node_put(e);
  return ...;
)
}
// </smpl>

Fixes: f2dd36ac9974c ("OMAPDSS: move 'compatible' converter to omapdss driver")
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>

---
 drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff -u -p a/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c b/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c
--- a/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c
+++ b/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c
@@ -192,8 +192,10 @@ static int __init omapdss_boot_init(void
 
 	dss = of_find_matching_node(NULL, omapdss_of_match);
 
-	if (dss = NULL || !of_device_is_available(dss))
+	if (dss = NULL || !of_device_is_available(dss)) {
+		of_node_put(dss);
 		return 0;
+	}
 
 	omapdss_walk_device(dss, true);
 

[PATCH 07/12] drm: omapdrm: add missing of_node_put after of_device_is_available

[Julia Lawall]

Add an of_node_put when a tested device node is not available.

The semantic patch that fixes this problem is as follows
(http://coccinelle.lip6.fr):

// <smpl>
@@
identifier f;
local idexpression e;
expression x;
@@

e = f(...);
... when != of_node_put(e)
    when != x = e
    when != e = x
    when any
if (<+...of_device_is_available(e)...+>) {
  ... when != of_node_put(e)
(
  return e;
|
+ of_node_put(e);
  return ...;
)
}
// </smpl>

Fixes: f2dd36ac9974c ("OMAPDSS: move 'compatible' converter to omapdss driver")
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>

---
 drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff -u -p a/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c b/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c
--- a/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c
+++ b/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c
@@ -192,8 +192,10 @@ static int __init omapdss_boot_init(void
 
 	dss = of_find_matching_node(NULL, omapdss_of_match);
 
-	if (dss == NULL || !of_device_is_available(dss))
+	if (dss == NULL || !of_device_is_available(dss)) {
+		of_node_put(dss);
 		return 0;
+	}
 
 	omapdss_walk_device(dss, true);
 

Re: [PATCH 07/12] drm: omapdrm: add missing of_node_put after of_device_is_available

[Mukesh Ojha]

On 2/23/2019 6:50 PM, Julia Lawall wrote:
> Add an of_node_put when a tested device node is not available.
>
> The semantic patch that fixes this problem is as follows
> (http://coccinelle.lip6.fr):
>
> // <smpl>
> @@
> identifier f;
> local idexpression e;
> expression x;
> @@
>
> e = f(...);
> ... when != of_node_put(e)
>      when != x = e
>      when != e = x
>      when any
> if (<+...of_device_is_available(e)...+>) {
>    ... when != of_node_put(e)
> (
>    return e;
> |
> + of_node_put(e);
>    return ...;
> )
> }
> // </smpl>
>
> Fixes: f2dd36ac9974c ("OMAPDSS: move 'compatible' converter to omapdss driver")
> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>


Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>

Cheers,
-Mukesh

>
> ---
>   drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c |    4 +++-
>   1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff -u -p a/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c b/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c
> --- a/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c
> +++ b/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c
> @@ -192,8 +192,10 @@ static int __init omapdss_boot_init(void
>   
>   	dss = of_find_matching_node(NULL, omapdss_of_match);
>   
> -	if (dss == NULL || !of_device_is_available(dss))
> +	if (dss == NULL || !of_device_is_available(dss)) {
> +		of_node_put(dss);
>   		return 0;
> +	}
>   
>   	omapdss_walk_device(dss, true);
>   
>

Re: [PATCH 07/12] drm: omapdrm: add missing of_node_put after of_device_is_available

[Mukesh Ojha]

On 2/23/2019 6:50 PM, Julia Lawall wrote:
> Add an of_node_put when a tested device node is not available.
>
> The semantic patch that fixes this problem is as follows
> (http://coccinelle.lip6.fr):
>
> // <smpl>
> @@
> identifier f;
> local idexpression e;
> expression x;
> @@
>
> e = f(...);
> ... when != of_node_put(e)
>      when != x = e
>      when != e = x
>      when any
> if (<+...of_device_is_available(e)...+>) {
>    ... when != of_node_put(e)
> (
>    return e;
> |
> + of_node_put(e);
>    return ...;
> )
> }
> // </smpl>
>
> Fixes: f2dd36ac9974c ("OMAPDSS: move 'compatible' converter to omapdss driver")
> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>


Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>

Cheers,
-Mukesh

>
> ---
>   drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c |    4 +++-
>   1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff -u -p a/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c b/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c
> --- a/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c
> +++ b/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c
> @@ -192,8 +192,10 @@ static int __init omapdss_boot_init(void
>   
>   	dss = of_find_matching_node(NULL, omapdss_of_match);
>   
> -	if (dss = NULL || !of_device_is_available(dss))
> +	if (dss = NULL || !of_device_is_available(dss)) {
> +		of_node_put(dss);
>   		return 0;
> +	}
>   
>   	omapdss_walk_device(dss, true);
>   
>

[PATCH 08/12] crypto: add missing of_node_put after of_device_is_available

[Julia Lawall]

Add an of_node_put when a tested device node is not available.

The semantic patch that fixes this problem is as follows
(http://coccinelle.lip6.fr):

// <smpl>
@@
identifier f;
local idexpression e;
expression x;
@@

e = f(...);
... when != of_node_put(e)
    when != x = e
    when != e = x
    when any
if (<+...of_device_is_available(e)...+>) {
  ... when != of_node_put(e)
(
  return e;
|
+ of_node_put(e);
  return ...;
)
}
// </smpl>

Fixes: 5343e674f32fb ("crypto4xx: integrate ppc4xx-rng into crypto4xx")
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>

---
 drivers/crypto/amcc/crypto4xx_trng.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff -u -p a/drivers/crypto/amcc/crypto4xx_trng.c b/drivers/crypto/amcc/crypto4xx_trng.c
--- a/drivers/crypto/amcc/crypto4xx_trng.c
+++ b/drivers/crypto/amcc/crypto4xx_trng.c
@@ -80,8 +80,10 @@ void ppc4xx_trng_probe(struct crypto4xx_
 
 	/* Find the TRNG device node and map it */
 	trng = of_find_matching_node(NULL, ppc4xx_trng_match);
-	if (!trng || !of_device_is_available(trng))
+	if (!trng || !of_device_is_available(trng)) {
+		of_node_put(trng);
 		return;
+	}
 
 	dev->trng_base = of_iomap(trng, 0);
 	of_node_put(trng);

[PATCH 08/12] crypto: add missing of_node_put after of_device_is_available

[Julia Lawall]

Add an of_node_put when a tested device node is not available.

The semantic patch that fixes this problem is as follows
(http://coccinelle.lip6.fr):

// <smpl>
@@
identifier f;
local idexpression e;
expression x;
@@

e = f(...);
... when != of_node_put(e)
    when != x = e
    when != e = x
    when any
if (<+...of_device_is_available(e)...+>) {
  ... when != of_node_put(e)
(
  return e;
|
+ of_node_put(e);
  return ...;
)
}
// </smpl>

Fixes: 5343e674f32fb ("crypto4xx: integrate ppc4xx-rng into crypto4xx")
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>

---
 drivers/crypto/amcc/crypto4xx_trng.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff -u -p a/drivers/crypto/amcc/crypto4xx_trng.c b/drivers/crypto/amcc/crypto4xx_trng.c
--- a/drivers/crypto/amcc/crypto4xx_trng.c
+++ b/drivers/crypto/amcc/crypto4xx_trng.c
@@ -80,8 +80,10 @@ void ppc4xx_trng_probe(struct crypto4xx_
 
 	/* Find the TRNG device node and map it */
 	trng = of_find_matching_node(NULL, ppc4xx_trng_match);
-	if (!trng || !of_device_is_available(trng))
+	if (!trng || !of_device_is_available(trng)) {
+		of_node_put(trng);
 		return;
+	}
 
 	dev->trng_base = of_iomap(trng, 0);
 	of_node_put(trng);

Re: [PATCH 08/12] crypto: add missing of_node_put after of_device_is_available

[Herbert Xu]

On Sat, Feb 23, 2019 at 02:20:39PM +0100, Julia Lawall wrote:
> Add an of_node_put when a tested device node is not available.
> 
> The semantic patch that fixes this problem is as follows
> (http://coccinelle.lip6.fr):
> 
> // <smpl>
> @@
> identifier f;
> local idexpression e;
> expression x;
> @@
> 
> e = f(...);
> ... when != of_node_put(e)
>     when != x = e
>     when != e = x
>     when any
> if (<+...of_device_is_available(e)...+>) {
>   ... when != of_node_put(e)
> (
>   return e;
> |
> + of_node_put(e);
>   return ...;
> )
> }
> // </smpl>
> 
> Fixes: 5343e674f32fb ("crypto4xx: integrate ppc4xx-rng into crypto4xx")
> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
> 
> ---
>  drivers/crypto/amcc/crypto4xx_trng.c |    4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)

Patch applied.  Thanks.
-- 
Email: Herbert Xu <herbert@gondor.apana.org.au>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt

Re: [PATCH 08/12] crypto: add missing of_node_put after of_device_is_available

[Herbert Xu]

On Sat, Feb 23, 2019 at 02:20:39PM +0100, Julia Lawall wrote:
> Add an of_node_put when a tested device node is not available.
> 
> The semantic patch that fixes this problem is as follows
> (http://coccinelle.lip6.fr):
> 
> // <smpl>
> @@
> identifier f;
> local idexpression e;
> expression x;
> @@
> 
> e = f(...);
> ... when != of_node_put(e)
>     when != x = e
>     when != e = x
>     when any
> if (<+...of_device_is_available(e)...+>) {
>   ... when != of_node_put(e)
> (
>   return e;
> |
> + of_node_put(e);
>   return ...;
> )
> }
> // </smpl>
> 
> Fixes: 5343e674f32fb ("crypto4xx: integrate ppc4xx-rng into crypto4xx")
> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
> 
> ---
>  drivers/crypto/amcc/crypto4xx_trng.c |    4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)

Patch applied.  Thanks.
-- 
Email: Herbert Xu <herbert@gondor.apana.org.au>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt

[PATCH 09/12] meson-gx-socinfo: add missing of_node_put after of_device_is_available

[Julia Lawall]

Add an of_node_put when a tested device node is not available.

The semantic patch that fixes this problem is as follows
(http://coccinelle.lip6.fr):

// <smpl>
@@
identifier f;
local idexpression e;
expression x;
@@

e = f(...);
... when != of_node_put(e)
    when != x = e
    when != e = x
    when any
if (<+...of_device_is_available(e)...+>) {
  ... when != of_node_put(e)
(
  return e;
|
+ of_node_put(e);
  return ...;
)
}
// </smpl>

Fixes: a9daaba2965e8 ("soc: Add Amlogic SoC Information driver")
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>

---
 drivers/soc/amlogic/meson-gx-socinfo.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff -u -p a/drivers/soc/amlogic/meson-gx-socinfo.c b/drivers/soc/amlogic/meson-gx-socinfo.c
--- a/drivers/soc/amlogic/meson-gx-socinfo.c
+++ b/drivers/soc/amlogic/meson-gx-socinfo.c
@@ -123,8 +123,10 @@ static int __init meson_gx_socinfo_init(
 		return -ENODEV;
 
 	/* check if interface is enabled */
-	if (!of_device_is_available(np))
+	if (!of_device_is_available(np)) {
+		of_node_put(np);
 		return -ENODEV;
+	}
 
 	/* check if chip-id is available */
 	if (!of_property_read_bool(np, "amlogic,has-chip-id"))

[PATCH 09/12] meson-gx-socinfo: add missing of_node_put after of_device_is_available

[Julia Lawall]

Add an of_node_put when a tested device node is not available.

The semantic patch that fixes this problem is as follows
(http://coccinelle.lip6.fr):

// <smpl>
@@
identifier f;
local idexpression e;
expression x;
@@

e = f(...);
... when != of_node_put(e)
    when != x = e
    when != e = x
    when any
if (<+...of_device_is_available(e)...+>) {
  ... when != of_node_put(e)
(
  return e;
|
+ of_node_put(e);
  return ...;
)
}
// </smpl>

Fixes: a9daaba2965e8 ("soc: Add Amlogic SoC Information driver")
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>

---
 drivers/soc/amlogic/meson-gx-socinfo.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff -u -p a/drivers/soc/amlogic/meson-gx-socinfo.c b/drivers/soc/amlogic/meson-gx-socinfo.c
--- a/drivers/soc/amlogic/meson-gx-socinfo.c
+++ b/drivers/soc/amlogic/meson-gx-socinfo.c
@@ -123,8 +123,10 @@ static int __init meson_gx_socinfo_init(
 		return -ENODEV;
 
 	/* check if interface is enabled */
-	if (!of_device_is_available(np))
+	if (!of_device_is_available(np)) {
+		of_node_put(np);
 		return -ENODEV;
+	}
 
 	/* check if chip-id is available */
 	if (!of_property_read_bool(np, "amlogic,has-chip-id"))

[PATCH 09/12] meson-gx-socinfo: add missing of_node_put after of_device_is_available

[Julia Lawall]

Add an of_node_put when a tested device node is not available.

The semantic patch that fixes this problem is as follows
(http://coccinelle.lip6.fr):

// <smpl>
@@
identifier f;
local idexpression e;
expression x;
@@

e = f(...);
... when != of_node_put(e)
    when != x = e
    when != e = x
    when any
if (<+...of_device_is_available(e)...+>) {
  ... when != of_node_put(e)
(
  return e;
|
+ of_node_put(e);
  return ...;
)
}
// </smpl>

Fixes: a9daaba2965e8 ("soc: Add Amlogic SoC Information driver")
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>

---
 drivers/soc/amlogic/meson-gx-socinfo.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff -u -p a/drivers/soc/amlogic/meson-gx-socinfo.c b/drivers/soc/amlogic/meson-gx-socinfo.c
--- a/drivers/soc/amlogic/meson-gx-socinfo.c
+++ b/drivers/soc/amlogic/meson-gx-socinfo.c
@@ -123,8 +123,10 @@ static int __init meson_gx_socinfo_init(
 		return -ENODEV;
 
 	/* check if interface is enabled */
-	if (!of_device_is_available(np))
+	if (!of_device_is_available(np)) {
+		of_node_put(np);
 		return -ENODEV;
+	}
 
 	/* check if chip-id is available */
 	if (!of_property_read_bool(np, "amlogic,has-chip-id"))


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 09/12] meson-gx-socinfo: add missing of_node_put after of_device_is_available

[Julia Lawall]

Add an of_node_put when a tested device node is not available.

The semantic patch that fixes this problem is as follows
(http://coccinelle.lip6.fr):

// <smpl>
@@
identifier f;
local idexpression e;
expression x;
@@

e = f(...);
... when != of_node_put(e)
    when != x = e
    when != e = x
    when any
if (<+...of_device_is_available(e)...+>) {
  ... when != of_node_put(e)
(
  return e;
|
+ of_node_put(e);
  return ...;
)
}
// </smpl>

Fixes: a9daaba2965e8 ("soc: Add Amlogic SoC Information driver")
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>

---
 drivers/soc/amlogic/meson-gx-socinfo.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff -u -p a/drivers/soc/amlogic/meson-gx-socinfo.c b/drivers/soc/amlogic/meson-gx-socinfo.c
--- a/drivers/soc/amlogic/meson-gx-socinfo.c
+++ b/drivers/soc/amlogic/meson-gx-socinfo.c
@@ -123,8 +123,10 @@ static int __init meson_gx_socinfo_init(
 		return -ENODEV;
 
 	/* check if interface is enabled */
-	if (!of_device_is_available(np))
+	if (!of_device_is_available(np)) {
+		of_node_put(np);
 		return -ENODEV;
+	}
 
 	/* check if chip-id is available */
 	if (!of_property_read_bool(np, "amlogic,has-chip-id"))


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 09/12] meson-gx-socinfo: add missing of_node_put after of_device_is_available

[Kevin Hilman]

Julia Lawall <Julia.Lawall@lip6.fr> writes:

> Add an of_node_put when a tested device node is not available.

[...] 
]

> Fixes: a9daaba2965e8 ("soc: Add Amlogic SoC Information driver")
> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>

Patch applied,

Thanks,

Kevin

Re: [PATCH 09/12] meson-gx-socinfo: add missing of_node_put after of_device_is_available

[Kevin Hilman]

Julia Lawall <Julia.Lawall@lip6.fr> writes:

> Add an of_node_put when a tested device node is not available.

[...] 
]

> Fixes: a9daaba2965e8 ("soc: Add Amlogic SoC Information driver")
> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>

Patch applied,

Thanks,

Kevin

Re: [PATCH 09/12] meson-gx-socinfo: add missing of_node_put after of_device_is_available

[Kevin Hilman]

Julia Lawall <Julia.Lawall@lip6.fr> writes:

> Add an of_node_put when a tested device node is not available.

[...] 
]

> Fixes: a9daaba2965e8 ("soc: Add Amlogic SoC Information driver")
> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>

Patch applied,

Thanks,

Kevin

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 09/12] meson-gx-socinfo: add missing of_node_put after of_device_is_available

[Kevin Hilman]

Julia Lawall <Julia.Lawall@lip6.fr> writes:

> Add an of_node_put when a tested device node is not available.

[...] 
]

> Fixes: a9daaba2965e8 ("soc: Add Amlogic SoC Information driver")
> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>

Patch applied,

Thanks,

Kevin

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 09/12] meson-gx-socinfo: add missing of_node_put after of_device_is_available

[Markus Elfring]

> @@ -123,8 +123,10 @@  static int __init meson_gx_socinfo_init(
>  		return -ENODEV;
>
>  	/* check if interface is enabled */
> -	if (!of_device_is_available(np))
> +	if (!of_device_is_available(np)) {
> +		of_node_put(np);
>  		return -ENODEV;
> +	}
>
>  	/* check if chip-id is available */
>  	if (!of_property_read_bool(np, "amlogic,has-chip-id"))

How do you think about to adjust the exception handling in this function
implementation a bit more according to the Linux coding style?

Regards,
Markus

Re: [PATCH 09/12] meson-gx-socinfo: add missing of_node_put after of_device_is_available

[Markus Elfring]

> @@ -123,8 +123,10 @@  static int __init meson_gx_socinfo_init(
>  		return -ENODEV;
>
>  	/* check if interface is enabled */
> -	if (!of_device_is_available(np))
> +	if (!of_device_is_available(np)) {
> +		of_node_put(np);
>  		return -ENODEV;
> +	}
>
>  	/* check if chip-id is available */
>  	if (!of_property_read_bool(np, "amlogic,has-chip-id"))

How do you think about to adjust the exception handling in this function
implementation a bit more according to the Linux coding style?

Regards,
Markus

Re: [PATCH 09/12] meson-gx-socinfo: add missing of_node_put after of_device_is_available

[Markus Elfring]

> @@ -123,8 +123,10 @@  static int __init meson_gx_socinfo_init(
>  		return -ENODEV;
>
>  	/* check if interface is enabled */
> -	if (!of_device_is_available(np))
> +	if (!of_device_is_available(np)) {
> +		of_node_put(np);
>  		return -ENODEV;
> +	}
>
>  	/* check if chip-id is available */
>  	if (!of_property_read_bool(np, "amlogic,has-chip-id"))

How do you think about to adjust the exception handling in this function
implementation a bit more according to the Linux coding style?

Regards,
Markus

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 09/12] meson-gx-socinfo: add missing of_node_put after of_device_is_available

[Markus Elfring]

> @@ -123,8 +123,10 @@  static int __init meson_gx_socinfo_init(
>  		return -ENODEV;
>
>  	/* check if interface is enabled */
> -	if (!of_device_is_available(np))
> +	if (!of_device_is_available(np)) {
> +		of_node_put(np);
>  		return -ENODEV;
> +	}
>
>  	/* check if chip-id is available */
>  	if (!of_property_read_bool(np, "amlogic,has-chip-id"))

How do you think about to adjust the exception handling in this function
implementation a bit more according to the Linux coding style?

Regards,
Markus

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 10/12] cpufreq: ap806: add missing of_node_put after of_device_is_available

[Julia Lawall]

Add an of_node_put when a tested device node is not available.

The semantic patch that fixes this problem is as follows
(http://coccinelle.lip6.fr):

// <smpl>
@@
identifier f;
local idexpression e;
expression x;
@@

e = f(...);
... when != of_node_put(e)
    when != x = e
    when != e = x
    when any
if (<+...of_device_is_available(e)...+>) {
  ... when != of_node_put(e)
(
  return e;
|
+ of_node_put(e);
  return ...;
)
}
// </smpl>

Fixes: f525a670533d9 ("cpufreq: ap806: add cpufreq driver for Armada 8K")
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>

---
 drivers/cpufreq/armada-8k-cpufreq.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff -u -p a/drivers/cpufreq/armada-8k-cpufreq.c b/drivers/cpufreq/armada-8k-cpufreq.c
--- a/drivers/cpufreq/armada-8k-cpufreq.c
+++ b/drivers/cpufreq/armada-8k-cpufreq.c
@@ -128,8 +128,10 @@ static int __init armada_8k_cpufreq_init
 	struct cpumask cpus;
 
 	node = of_find_compatible_node(NULL, NULL, "marvell,ap806-cpu-clock");
-	if (!node || !of_device_is_available(node))
+	if (!node || !of_device_is_available(node)) {
+		of_node_put(node);
 		return -ENODEV;
+	}
 
 	nb_cpus = num_possible_cpus();
 	freq_tables = kcalloc(nb_cpus, sizeof(*freq_tables), GFP_KERNEL);

[PATCH 10/12] cpufreq: ap806: add missing of_node_put after of_device_is_available

[Julia Lawall]

Add an of_node_put when a tested device node is not available.

The semantic patch that fixes this problem is as follows
(http://coccinelle.lip6.fr):

// <smpl>
@@
identifier f;
local idexpression e;
expression x;
@@

e = f(...);
... when != of_node_put(e)
    when != x = e
    when != e = x
    when any
if (<+...of_device_is_available(e)...+>) {
  ... when != of_node_put(e)
(
  return e;
|
+ of_node_put(e);
  return ...;
)
}
// </smpl>

Fixes: f525a670533d9 ("cpufreq: ap806: add cpufreq driver for Armada 8K")
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>

---
 drivers/cpufreq/armada-8k-cpufreq.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff -u -p a/drivers/cpufreq/armada-8k-cpufreq.c b/drivers/cpufreq/armada-8k-cpufreq.c
--- a/drivers/cpufreq/armada-8k-cpufreq.c
+++ b/drivers/cpufreq/armada-8k-cpufreq.c
@@ -128,8 +128,10 @@ static int __init armada_8k_cpufreq_init
 	struct cpumask cpus;
 
 	node = of_find_compatible_node(NULL, NULL, "marvell,ap806-cpu-clock");
-	if (!node || !of_device_is_available(node))
+	if (!node || !of_device_is_available(node)) {
+		of_node_put(node);
 		return -ENODEV;
+	}
 
 	nb_cpus = num_possible_cpus();
 	freq_tables = kcalloc(nb_cpus, sizeof(*freq_tables), GFP_KERNEL);

[PATCH 10/12] cpufreq: ap806: add missing of_node_put after of_device_is_available

[Julia Lawall]

Add an of_node_put when a tested device node is not available.

The semantic patch that fixes this problem is as follows
(http://coccinelle.lip6.fr):

// <smpl>
@@
identifier f;
local idexpression e;
expression x;
@@

e = f(...);
... when != of_node_put(e)
    when != x = e
    when != e = x
    when any
if (<+...of_device_is_available(e)...+>) {
  ... when != of_node_put(e)
(
  return e;
|
+ of_node_put(e);
  return ...;
)
}
// </smpl>

Fixes: f525a670533d9 ("cpufreq: ap806: add cpufreq driver for Armada 8K")
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>

---
 drivers/cpufreq/armada-8k-cpufreq.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff -u -p a/drivers/cpufreq/armada-8k-cpufreq.c b/drivers/cpufreq/armada-8k-cpufreq.c
--- a/drivers/cpufreq/armada-8k-cpufreq.c
+++ b/drivers/cpufreq/armada-8k-cpufreq.c
@@ -128,8 +128,10 @@ static int __init armada_8k_cpufreq_init
 	struct cpumask cpus;
 
 	node = of_find_compatible_node(NULL, NULL, "marvell,ap806-cpu-clock");
-	if (!node || !of_device_is_available(node))
+	if (!node || !of_device_is_available(node)) {
+		of_node_put(node);
 		return -ENODEV;
+	}
 
 	nb_cpus = num_possible_cpus();
 	freq_tables = kcalloc(nb_cpus, sizeof(*freq_tables), GFP_KERNEL);


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 10/12] cpufreq: ap806: add missing of_node_put after of_device_is_available

[Julia Lawall]

Add an of_node_put when a tested device node is not available.

The semantic patch that fixes this problem is as follows
(http://coccinelle.lip6.fr):

// <smpl>
@@
identifier f;
local idexpression e;
expression x;
@@

e = f(...);
... when != of_node_put(e)
    when != x = e
    when != e = x
    when any
if (<+...of_device_is_available(e)...+>) {
  ... when != of_node_put(e)
(
  return e;
|
+ of_node_put(e);
  return ...;
)
}
// </smpl>

Fixes: f525a670533d9 ("cpufreq: ap806: add cpufreq driver for Armada 8K")
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>

---
 drivers/cpufreq/armada-8k-cpufreq.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff -u -p a/drivers/cpufreq/armada-8k-cpufreq.c b/drivers/cpufreq/armada-8k-cpufreq.c
--- a/drivers/cpufreq/armada-8k-cpufreq.c
+++ b/drivers/cpufreq/armada-8k-cpufreq.c
@@ -128,8 +128,10 @@ static int __init armada_8k_cpufreq_init
 	struct cpumask cpus;
 
 	node = of_find_compatible_node(NULL, NULL, "marvell,ap806-cpu-clock");
-	if (!node || !of_device_is_available(node))
+	if (!node || !of_device_is_available(node)) {
+		of_node_put(node);
 		return -ENODEV;
+	}
 
 	nb_cpus = num_possible_cpus();
 	freq_tables = kcalloc(nb_cpus, sizeof(*freq_tables), GFP_KERNEL);

Re: [PATCH 10/12] cpufreq: ap806: add missing of_node_put after of_device_is_available

[Viresh Kumar]

On 23-02-19, 14:20, Julia Lawall wrote:
> Add an of_node_put when a tested device node is not available.
> 
> The semantic patch that fixes this problem is as follows
> (http://coccinelle.lip6.fr):
> 
> // <smpl>
> @@
> identifier f;
> local idexpression e;
> expression x;
> @@
> 
> e = f(...);
> ... when != of_node_put(e)
>     when != x = e
>     when != e = x
>     when any
> if (<+...of_device_is_available(e)...+>) {
>   ... when != of_node_put(e)
> (
>   return e;
> |
> + of_node_put(e);
>   return ...;
> )
> }
> // </smpl>
> 
> Fixes: f525a670533d9 ("cpufreq: ap806: add cpufreq driver for Armada 8K")
> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
> 
> ---
>  drivers/cpufreq/armada-8k-cpufreq.c |    4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff -u -p a/drivers/cpufreq/armada-8k-cpufreq.c b/drivers/cpufreq/armada-8k-cpufreq.c
> --- a/drivers/cpufreq/armada-8k-cpufreq.c
> +++ b/drivers/cpufreq/armada-8k-cpufreq.c
> @@ -128,8 +128,10 @@ static int __init armada_8k_cpufreq_init
>  	struct cpumask cpus;
>  
>  	node = of_find_compatible_node(NULL, NULL, "marvell,ap806-cpu-clock");
> -	if (!node || !of_device_is_available(node))
> +	if (!node || !of_device_is_available(node)) {
> +		of_node_put(node);
>  		return -ENODEV;
> +	}
>  
>  	nb_cpus = num_possible_cpus();
>  	freq_tables = kcalloc(nb_cpus, sizeof(*freq_tables), GFP_KERNEL);

Applied. Thanks.

-- 
viresh

Re: [PATCH 10/12] cpufreq: ap806: add missing of_node_put after of_device_is_available

[Viresh Kumar]

On 23-02-19, 14:20, Julia Lawall wrote:
> Add an of_node_put when a tested device node is not available.
> 
> The semantic patch that fixes this problem is as follows
> (http://coccinelle.lip6.fr):
> 
> // <smpl>
> @@
> identifier f;
> local idexpression e;
> expression x;
> @@
> 
> e = f(...);
> ... when != of_node_put(e)
>     when != x = e
>     when != e = x
>     when any
> if (<+...of_device_is_available(e)...+>) {
>   ... when != of_node_put(e)
> (
>   return e;
> |
> + of_node_put(e);
>   return ...;
> )
> }
> // </smpl>
> 
> Fixes: f525a670533d9 ("cpufreq: ap806: add cpufreq driver for Armada 8K")
> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
> 
> ---
>  drivers/cpufreq/armada-8k-cpufreq.c |    4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff -u -p a/drivers/cpufreq/armada-8k-cpufreq.c b/drivers/cpufreq/armada-8k-cpufreq.c
> --- a/drivers/cpufreq/armada-8k-cpufreq.c
> +++ b/drivers/cpufreq/armada-8k-cpufreq.c
> @@ -128,8 +128,10 @@ static int __init armada_8k_cpufreq_init
>  	struct cpumask cpus;
>  
>  	node = of_find_compatible_node(NULL, NULL, "marvell,ap806-cpu-clock");
> -	if (!node || !of_device_is_available(node))
> +	if (!node || !of_device_is_available(node)) {
> +		of_node_put(node);
>  		return -ENODEV;
> +	}
>  
>  	nb_cpus = num_possible_cpus();
>  	freq_tables = kcalloc(nb_cpus, sizeof(*freq_tables), GFP_KERNEL);

Applied. Thanks.

-- 
viresh

Re: [PATCH 10/12] cpufreq: ap806: add missing of_node_put after of_device_is_available

[Viresh Kumar]

On 23-02-19, 14:20, Julia Lawall wrote:
> Add an of_node_put when a tested device node is not available.
> 
> The semantic patch that fixes this problem is as follows
> (http://coccinelle.lip6.fr):
> 
> // <smpl>
> @@
> identifier f;
> local idexpression e;
> expression x;
> @@
> 
> e = f(...);
> ... when != of_node_put(e)
>     when != x = e
>     when != e = x
>     when any
> if (<+...of_device_is_available(e)...+>) {
>   ... when != of_node_put(e)
> (
>   return e;
> |
> + of_node_put(e);
>   return ...;
> )
> }
> // </smpl>
> 
> Fixes: f525a670533d9 ("cpufreq: ap806: add cpufreq driver for Armada 8K")
> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
> 
> ---
>  drivers/cpufreq/armada-8k-cpufreq.c |    4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff -u -p a/drivers/cpufreq/armada-8k-cpufreq.c b/drivers/cpufreq/armada-8k-cpufreq.c
> --- a/drivers/cpufreq/armada-8k-cpufreq.c
> +++ b/drivers/cpufreq/armada-8k-cpufreq.c
> @@ -128,8 +128,10 @@ static int __init armada_8k_cpufreq_init
>  	struct cpumask cpus;
>  
>  	node = of_find_compatible_node(NULL, NULL, "marvell,ap806-cpu-clock");
> -	if (!node || !of_device_is_available(node))
> +	if (!node || !of_device_is_available(node)) {
> +		of_node_put(node);
>  		return -ENODEV;
> +	}
>  
>  	nb_cpus = num_possible_cpus();
>  	freq_tables = kcalloc(nb_cpus, sizeof(*freq_tables), GFP_KERNEL);

Applied. Thanks.

-- 
viresh

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 11/12] ARM: OMAP2+: add missing of_node_put after of_device_is_available

[Julia Lawall]

Add an of_node_put when a tested device node is not available.

The semantic patch that fixes this problem is as follows
(http://coccinelle.lip6.fr):

// <smpl>
@@
identifier f;
local idexpression e;
expression x;
@@

e = f(...);
... when != of_node_put(e)
    when != x = e
    when != e = x
    when any
if (<+...of_device_is_available(e)...+>) {
  ... when != of_node_put(e)
(
  return e;
|
+ of_node_put(e);
  return ...;
)
}
// </smpl>

Fixes: e0c827aca0730 ("drm/omap: Populate DSS children in omapdss driver")
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>

---
 arch/arm/mach-omap2/display.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff -u -p a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -250,8 +250,10 @@ static int __init omapdss_init_of(void)
 	if (!node)
 		return 0;
 
-	if (!of_device_is_available(node))
+	if (!of_device_is_available(node)) {
+		of_node_put(node);
 		return 0;
+	}
 
 	pdev = of_find_device_by_node(node);
 

[PATCH 11/12] ARM: OMAP2+: add missing of_node_put after of_device_is_available

[Julia Lawall]

Add an of_node_put when a tested device node is not available.

The semantic patch that fixes this problem is as follows
(http://coccinelle.lip6.fr):

// <smpl>
@@
identifier f;
local idexpression e;
expression x;
@@

e = f(...);
... when != of_node_put(e)
    when != x = e
    when != e = x
    when any
if (<+...of_device_is_available(e)...+>) {
  ... when != of_node_put(e)
(
  return e;
|
+ of_node_put(e);
  return ...;
)
}
// </smpl>

Fixes: e0c827aca0730 ("drm/omap: Populate DSS children in omapdss driver")
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>

---
 arch/arm/mach-omap2/display.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff -u -p a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -250,8 +250,10 @@ static int __init omapdss_init_of(void)
 	if (!node)
 		return 0;
 
-	if (!of_device_is_available(node))
+	if (!of_device_is_available(node)) {
+		of_node_put(node);
 		return 0;
+	}
 
 	pdev = of_find_device_by_node(node);
 


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 11/12] ARM: OMAP2+: add missing of_node_put after of_device_is_available

[Julia Lawall]

Add an of_node_put when a tested device node is not available.

The semantic patch that fixes this problem is as follows
(http://coccinelle.lip6.fr):

// <smpl>
@@
identifier f;
local idexpression e;
expression x;
@@

e = f(...);
... when != of_node_put(e)
    when != x = e
    when != e = x
    when any
if (<+...of_device_is_available(e)...+>) {
  ... when != of_node_put(e)
(
  return e;
|
+ of_node_put(e);
  return ...;
)
}
// </smpl>

Fixes: e0c827aca0730 ("drm/omap: Populate DSS children in omapdss driver")
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>

---
 arch/arm/mach-omap2/display.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff -u -p a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -250,8 +250,10 @@ static int __init omapdss_init_of(void)
 	if (!node)
 		return 0;
 
-	if (!of_device_is_available(node))
+	if (!of_device_is_available(node)) {
+		of_node_put(node);
 		return 0;
+	}
 
 	pdev = of_find_device_by_node(node);
 

Re: [PATCH 11/12] ARM: OMAP2+: add missing of_node_put after of_device_is_available

[Tony Lindgren]

* Julia Lawall <Julia.Lawall@lip6.fr> [190223 13:58]:
> Add an of_node_put when a tested device node is not available.
> 
> The semantic patch that fixes this problem is as follows
> (http://coccinelle.lip6.fr):
> 
> // <smpl>
> @@
> identifier f;
> local idexpression e;
> expression x;
> @@
> 
> e = f(...);
> ... when != of_node_put(e)
>     when != x = e
>     when != e = x
>     when any
> if (<+...of_device_is_available(e)...+>) {
>   ... when != of_node_put(e)
> (
>   return e;
> |
> + of_node_put(e);
>   return ...;
> )
> }
> // </smpl>
> 
> Fixes: e0c827aca0730 ("drm/omap: Populate DSS children in omapdss driver")
> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>

Thanks applying this one into omap-for-v5.1/fixes.

Regards,

Tony

Re: [PATCH 11/12] ARM: OMAP2+: add missing of_node_put after of_device_is_available

[Tony Lindgren]

* Julia Lawall <Julia.Lawall@lip6.fr> [190223 13:58]:
> Add an of_node_put when a tested device node is not available.
> 
> The semantic patch that fixes this problem is as follows
> (http://coccinelle.lip6.fr):
> 
> // <smpl>
> @@
> identifier f;
> local idexpression e;
> expression x;
> @@
> 
> e = f(...);
> ... when != of_node_put(e)
>     when != x = e
>     when != e = x
>     when any
> if (<+...of_device_is_available(e)...+>) {
>   ... when != of_node_put(e)
> (
>   return e;
> |
> + of_node_put(e);
>   return ...;
> )
> }
> // </smpl>
> 
> Fixes: e0c827aca0730 ("drm/omap: Populate DSS children in omapdss driver")
> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>

Thanks applying this one into omap-for-v5.1/fixes.

Regards,

Tony

Re: [PATCH 11/12] ARM: OMAP2+: add missing of_node_put after of_device_is_available

[Tony Lindgren]

* Julia Lawall <Julia.Lawall@lip6.fr> [190223 13:58]:
> Add an of_node_put when a tested device node is not available.
> 
> The semantic patch that fixes this problem is as follows
> (http://coccinelle.lip6.fr):
> 
> // <smpl>
> @@
> identifier f;
> local idexpression e;
> expression x;
> @@
> 
> e = f(...);
> ... when != of_node_put(e)
>     when != x = e
>     when != e = x
>     when any
> if (<+...of_device_is_available(e)...+>) {
>   ... when != of_node_put(e)
> (
>   return e;
> |
> + of_node_put(e);
>   return ...;
> )
> }
> // </smpl>
> 
> Fixes: e0c827aca0730 ("drm/omap: Populate DSS children in omapdss driver")
> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>

Thanks applying this one into omap-for-v5.1/fixes.

Regards,

Tony

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 11/12] ARM: OMAP2+: add missing of_node_put after of_device_is_available

[Tony Lindgren]

* Julia Lawall <Julia.Lawall@lip6.fr> [190223 13:58]:
> Add an of_node_put when a tested device node is not available.
> 
> The semantic patch that fixes this problem is as follows
> (http://coccinelle.lip6.fr):
> 
> // <smpl>
> @@
> identifier f;
> local idexpression e;
> expression x;
> @@
> 
> e = f(...);
> ... when != of_node_put(e)
>     when != x = e
>     when != e = x
>     when any
> if (<+...of_device_is_available(e)...+>) {
>   ... when != of_node_put(e)
> (
>   return e;
> |
> + of_node_put(e);
>   return ...;
> )
> }
> // </smpl>
> 
> Fixes: e0c827aca0730 ("drm/omap: Populate DSS children in omapdss driver")
> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>

Thanks applying this one into omap-for-v5.1/fixes.

Regards,

Tony

Re: [11/12] ARM: OMAP2+: add missing of_node_put after of_device_is_available

[Markus Elfring]

> @@ -250,8 +250,10 @@ static int __init omapdss_init_of(void)
>  	if (!node)
>  		return 0;
>
> -	if (!of_device_is_available(node))
> +	if (!of_device_is_available(node)) {
> +		of_node_put(node);
>  		return 0;
> +	}
>
>  	pdev = of_find_device_by_node(node);

Is there a need to put the node also in subsequent if branches
for complete exception handling in this function implementation?

Regards,
Markus

Re: [11/12] ARM: OMAP2+: add missing of_node_put after of_device_is_available

[Markus Elfring]

> @@ -250,8 +250,10 @@ static int __init omapdss_init_of(void)
>  	if (!node)
>  		return 0;
>
> -	if (!of_device_is_available(node))
> +	if (!of_device_is_available(node)) {
> +		of_node_put(node);
>  		return 0;
> +	}
>
>  	pdev = of_find_device_by_node(node);

Is there a need to put the node also in subsequent if branches
for complete exception handling in this function implementation?

Regards,
Markus

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [11/12] ARM: OMAP2+: add missing of_node_put after of_device_is_available

[Markus Elfring]

> @@ -250,8 +250,10 @@ static int __init omapdss_init_of(void)
>  	if (!node)
>  		return 0;
>
> -	if (!of_device_is_available(node))
> +	if (!of_device_is_available(node)) {
> +		of_node_put(node);
>  		return 0;
> +	}
>
>  	pdev = of_find_device_by_node(node);

Is there a need to put the node also in subsequent if branches
for complete exception handling in this function implementation?

Regards,
Markus

Re: [11/12] ARM: OMAP2+: add missing of_node_put after of_device_is_available

[Julia Lawall]

On Sun, 14 Apr 2019, Markus Elfring wrote:

> > @@ -250,8 +250,10 @@ static int __init omapdss_init_of(void)
> >  	if (!node)
> >  		return 0;
> >
> > -	if (!of_device_is_available(node))
> > +	if (!of_device_is_available(node)) {
> > +		of_node_put(node);
> >  		return 0;
> > +	}
> >
> >  	pdev = of_find_device_by_node(node);
>
> Is there a need to put the node also in subsequent if branches
> for complete exception handling in this function implementation?

Yes, it looks like this is indeed missing.  I will try to send a better
patch when time permits.

julia

Re: [11/12] ARM: OMAP2+: add missing of_node_put after of_device_is_available

[Julia Lawall]

On Sun, 14 Apr 2019, Markus Elfring wrote:

> > @@ -250,8 +250,10 @@ static int __init omapdss_init_of(void)
> >  	if (!node)
> >  		return 0;
> >
> > -	if (!of_device_is_available(node))
> > +	if (!of_device_is_available(node)) {
> > +		of_node_put(node);
> >  		return 0;
> > +	}
> >
> >  	pdev = of_find_device_by_node(node);
>
> Is there a need to put the node also in subsequent if branches
> for complete exception handling in this function implementation?

Yes, it looks like this is indeed missing.  I will try to send a better
patch when time permits.

julia

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [11/12] ARM: OMAP2+: add missing of_node_put after of_device_is_available

[Julia Lawall]

On Sun, 14 Apr 2019, Markus Elfring wrote:

> > @@ -250,8 +250,10 @@ static int __init omapdss_init_of(void)
> >  	if (!node)
> >  		return 0;
> >
> > -	if (!of_device_is_available(node))
> > +	if (!of_device_is_available(node)) {
> > +		of_node_put(node);
> >  		return 0;
> > +	}
> >
> >  	pdev = of_find_device_by_node(node);
>
> Is there a need to put the node also in subsequent if branches
> for complete exception handling in this function implementation?

Yes, it looks like this is indeed missing.  I will try to send a better
patch when time permits.

julia

[PATCH 12/12] drivers: firmware: psci: add missing of_node_put after of_device_is_available

[Julia Lawall]

Add an of_node_put when a tested device node is not available.

The semantic patch that fixes this problem is as follows
(http://coccinelle.lip6.fr):

// <smpl>
@@
identifier f;
local idexpression e;
expression x;
@@

e = f(...);
... when != of_node_put(e)
    when != x = e
    when != e = x
    when any
if (<+...of_device_is_available(e)...+>) {
  ... when != of_node_put(e)
(
  return e;
|
+ of_node_put(e);
  return ...;
)
}
// </smpl>

Fixes: d09a0011ec0d5 ("drivers: psci: Allow PSCI node to be disabled")
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>

---
 drivers/firmware/psci.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff -u -p a/drivers/firmware/psci.c b/drivers/firmware/psci.c
--- a/drivers/firmware/psci.c
+++ b/drivers/firmware/psci.c
@@ -677,8 +677,10 @@ int __init psci_dt_init(void)
 
 	np = of_find_matching_node_and_match(NULL, psci_of_match, &matched_np);
 
-	if (!np || !of_device_is_available(np))
+	if (!np || !of_device_is_available(np)) {
+		of_node_put(np);
 		return -ENODEV;
+	}
 
 	init_fn = (psci_initcall_t)matched_np->data;
 	return init_fn(np);

[PATCH 12/12] drivers: firmware: psci: add missing of_node_put after of_device_is_available

[Julia Lawall]

Add an of_node_put when a tested device node is not available.

The semantic patch that fixes this problem is as follows
(http://coccinelle.lip6.fr):

// <smpl>
@@
identifier f;
local idexpression e;
expression x;
@@

e = f(...);
... when != of_node_put(e)
    when != x = e
    when != e = x
    when any
if (<+...of_device_is_available(e)...+>) {
  ... when != of_node_put(e)
(
  return e;
|
+ of_node_put(e);
  return ...;
)
}
// </smpl>

Fixes: d09a0011ec0d5 ("drivers: psci: Allow PSCI node to be disabled")
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>

---
 drivers/firmware/psci.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff -u -p a/drivers/firmware/psci.c b/drivers/firmware/psci.c
--- a/drivers/firmware/psci.c
+++ b/drivers/firmware/psci.c
@@ -677,8 +677,10 @@ int __init psci_dt_init(void)
 
 	np = of_find_matching_node_and_match(NULL, psci_of_match, &matched_np);
 
-	if (!np || !of_device_is_available(np))
+	if (!np || !of_device_is_available(np)) {
+		of_node_put(np);
 		return -ENODEV;
+	}
 
 	init_fn = (psci_initcall_t)matched_np->data;
 	return init_fn(np);

[PATCH 12/12] drivers: firmware: psci: add missing of_node_put after of_device_is_available

[Julia Lawall]

Add an of_node_put when a tested device node is not available.

The semantic patch that fixes this problem is as follows
(http://coccinelle.lip6.fr):

// <smpl>
@@
identifier f;
local idexpression e;
expression x;
@@

e = f(...);
... when != of_node_put(e)
    when != x = e
    when != e = x
    when any
if (<+...of_device_is_available(e)...+>) {
  ... when != of_node_put(e)
(
  return e;
|
+ of_node_put(e);
  return ...;
)
}
// </smpl>

Fixes: d09a0011ec0d5 ("drivers: psci: Allow PSCI node to be disabled")
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>

---
 drivers/firmware/psci.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff -u -p a/drivers/firmware/psci.c b/drivers/firmware/psci.c
--- a/drivers/firmware/psci.c
+++ b/drivers/firmware/psci.c
@@ -677,8 +677,10 @@ int __init psci_dt_init(void)
 
 	np = of_find_matching_node_and_match(NULL, psci_of_match, &matched_np);
 
-	if (!np || !of_device_is_available(np))
+	if (!np || !of_device_is_available(np)) {
+		of_node_put(np);
 		return -ENODEV;
+	}
 
 	init_fn = (psci_initcall_t)matched_np->data;
 	return init_fn(np);


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 12/12] drivers: firmware: psci: add missing of_node_put after of_device_is_available

[Mukesh Ojha]

On 2/23/2019 6:50 PM, Julia Lawall wrote:
> Add an of_node_put when a tested device node is not available.
>
> The semantic patch that fixes this problem is as follows
> (http://Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
>
> Cheers,
> -Mukesh.lip6.fr):
>
> // <smpl>
> @@
> identifier f;
> local idexpression e;
> expression x;
> @@
>
> e = f(...);
> ... when != of_node_put(e)
>      when != x = e
>      when != e = x
>      when any
> if (<+...of_device_is_available(e)...+>) {
>    ... when != of_node_put(e)
> (
>    return e;
> |
> + of_node_put(e);
>    return ...;
> )
> }
> // </smpl>
>
> Fixes: d09a0011ec0d5 ("drivers: psci: Allow PSCI node to be disabled")
> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>

Cheers,
-Mukesh
>
> ---
>   drivers/firmware/psci.c |    4 +++-
>   1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff -u -p a/drivers/firmware/psci.c b/drivers/firmware/psci.c
> --- a/drivers/firmware/psci.c
> +++ b/drivers/firmware/psci.c
> @@ -677,8 +677,10 @@ int __init psci_dt_init(void)
>   
>   	np = of_find_matching_node_and_match(NULL, psci_of_match, &matched_np);
>   
> -	if (!np || !of_device_is_available(np))
> +	if (!np || !of_device_is_available(np)) {
> +		of_node_put(np);
>   		return -ENODEV;
> +	}
>   
>   	init_fn = (psci_initcall_t)matched_np->data;
>   	return init_fn(np);
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 12/12] drivers: firmware: psci: add missing of_node_put after of_device_is_available

[Mukesh Ojha]

On 2/23/2019 6:50 PM, Julia Lawall wrote:
> Add an of_node_put when a tested device node is not available.
>
> The semantic patch that fixes this problem is as follows
> (http://Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
>
> Cheers,
> -Mukesh.lip6.fr):
>
> // <smpl>
> @@
> identifier f;
> local idexpression e;
> expression x;
> @@
>
> e = f(...);
> ... when != of_node_put(e)
>      when != x = e
>      when != e = x
>      when any
> if (<+...of_device_is_available(e)...+>) {
>    ... when != of_node_put(e)
> (
>    return e;
> |
> + of_node_put(e);
>    return ...;
> )
> }
> // </smpl>
>
> Fixes: d09a0011ec0d5 ("drivers: psci: Allow PSCI node to be disabled")
> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>

Cheers,
-Mukesh
>
> ---
>   drivers/firmware/psci.c |    4 +++-
>   1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff -u -p a/drivers/firmware/psci.c b/drivers/firmware/psci.c
> --- a/drivers/firmware/psci.c
> +++ b/drivers/firmware/psci.c
> @@ -677,8 +677,10 @@ int __init psci_dt_init(void)
>   
>   	np = of_find_matching_node_and_match(NULL, psci_of_match, &matched_np);
>   
> -	if (!np || !of_device_is_available(np))
> +	if (!np || !of_device_is_available(np)) {
> +		of_node_put(np);
>   		return -ENODEV;
> +	}
>   
>   	init_fn = (psci_initcall_t)matched_np->data;
>   	return init_fn(np);
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 12/12] drivers: firmware: psci: add missing of_node_put after of_device_is_available

[Mukesh Ojha]

On 2/23/2019 6:50 PM, Julia Lawall wrote:
> Add an of_node_put when a tested device node is not available.
>
> The semantic patch that fixes this problem is as follows
> (http://Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
>
> Cheers,
> -Mukesh.lip6.fr):
>
> // <smpl>
> @@
> identifier f;
> local idexpression e;
> expression x;
> @@
>
> e = f(...);
> ... when != of_node_put(e)
>      when != x = e
>      when != e = x
>      when any
> if (<+...of_device_is_available(e)...+>) {
>    ... when != of_node_put(e)
> (
>    return e;
> |
> + of_node_put(e);
>    return ...;
> )
> }
> // </smpl>
>
> Fixes: d09a0011ec0d5 ("drivers: psci: Allow PSCI node to be disabled")
> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>

Cheers,
-Mukesh
>
> ---
>   drivers/firmware/psci.c |    4 +++-
>   1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff -u -p a/drivers/firmware/psci.c b/drivers/firmware/psci.c
> --- a/drivers/firmware/psci.c
> +++ b/drivers/firmware/psci.c
> @@ -677,8 +677,10 @@ int __init psci_dt_init(void)
>   
>   	np = of_find_matching_node_and_match(NULL, psci_of_match, &matched_np);
>   
> -	if (!np || !of_device_is_available(np))
> +	if (!np || !of_device_is_available(np)) {
> +		of_node_put(np);
>   		return -ENODEV;
> +	}
>   
>   	init_fn = (psci_initcall_t)matched_np->data;
>   	return init_fn(np);
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel