[PATCH 4/9] drm: meson: vpp: use proper macros instead of magic constants

[Julien Masson <jmasson@baylibre.com>]

This patch add new macros which are used to set the following
registers:
- VPP_OSD_SCALE_COEF_IDX
- VPP_DOLBY_CTRL
- VPP_OFIFO_SIZE
- VPP_HOLD_LINES
- VPP_SC_MISC
- VPP_VADJ_CTRL

Signed-off-by: Julien Masson <jmasson@baylibre.com>
---
 drivers/gpu/drm/meson/meson_registers.h |  8 ++++++++
 drivers/gpu/drm/meson/meson_vpp.c       | 27 ++++++++++++++++---------
 2 files changed, 25 insertions(+), 10 deletions(-)

diff --git a/drivers/gpu/drm/meson/meson_registers.h b/drivers/gpu/drm/meson/meson_registers.h
index a9db49e5bdd6..172f0794e0cd 100644
--- a/drivers/gpu/drm/meson/meson_registers.h
+++ b/drivers/gpu/drm/meson/meson_registers.h
@@ -349,6 +349,7 @@
 #define VPP_LINE_IN_LENGTH 0x1d01
 #define VPP_PIC_IN_HEIGHT 0x1d02
 #define VPP_SCALE_COEF_IDX 0x1d03
+#define		VPP_SCALE_HORIZONTAL_COEF       BIT(8)
 #define VPP_SCALE_COEF 0x1d04
 #define VPP_VSC_REGION12_STARTP 0x1d05
 #define VPP_VSC_REGION34_STARTP 0x1d06
@@ -385,6 +386,8 @@
 #define VPP_PREBLEND_H_SIZE 0x1d20
 #define VPP_POSTBLEND_H_SIZE 0x1d21
 #define VPP_HOLD_LINES 0x1d22
+#define		VPP_POSTBLEND_HOLD_LINES(lines) (lines & 0xf)
+#define		VPP_PREBLEND_HOLD_LINES(lines)  ((lines & 0xf) << 8)
 #define VPP_BLEND_ONECOLOR_CTRL 0x1d23
 #define VPP_PREBLEND_CURRENT_XY 0x1d24
 #define VPP_POSTBLEND_CURRENT_XY 0x1d25
@@ -403,6 +406,8 @@
 #define		VPP_OSD2_PREBLEND	BIT(17)
 #define		VPP_COLOR_MNG_ENABLE	BIT(28)
 #define VPP_OFIFO_SIZE 0x1d27
+#define		VPP_OFIFO_SIZE_MASK             GENMASK(13, 0)
+#define		VPP_OFIFO_SIZE_DEFAULT          (0xfff << 20 | 0x1000)
 #define VPP_FIFO_STATUS 0x1d28
 #define VPP_SMOKE_CTRL 0x1d29
 #define VPP_SMOKE1_VAL 0x1d2a
@@ -418,6 +423,8 @@
 #define VPP_HSC_PHASE_CTRL1 0x1d34
 #define VPP_HSC_INI_PAT_CTRL 0x1d35
 #define VPP_VADJ_CTRL 0x1d40
+#define		VPP_MINUS_BLACK_LVL_VADJ1_ENABLE BIT(1)
+
 #define VPP_VADJ1_Y 0x1d41
 #define VPP_VADJ1_MA_MB 0x1d42
 #define VPP_VADJ1_MC_MD 0x1d43
@@ -477,6 +484,7 @@
 #define VPP_PEAKING_VGAIN 0x1d92
 #define VPP_PEAKING_NLP_1 0x1d93
 #define VPP_DOLBY_CTRL 0x1d93
+#define VPP_PPS_DUMMY_DATA_MODE (1 << 17)
 #define VPP_PEAKING_NLP_2 0x1d94
 #define VPP_PEAKING_NLP_3 0x1d95
 #define VPP_PEAKING_NLP_4 0x1d96
diff --git a/drivers/gpu/drm/meson/meson_vpp.c b/drivers/gpu/drm/meson/meson_vpp.c
index bfee30fa6e34..c2aaf81b0101 100644
--- a/drivers/gpu/drm/meson/meson_vpp.c
+++ b/drivers/gpu/drm/meson/meson_vpp.c
@@ -57,7 +57,7 @@ static void meson_vpp_write_scaling_filter_coefs(struct meson_drm *priv,
 {
 	int i;
 
-	writel_relaxed(is_horizontal ? BIT(8) : 0,
+	writel_relaxed(is_horizontal ? VPP_SCALE_HORIZONTAL_COEF : 0,
 			priv->io_base + _REG(VPP_OSD_SCALE_COEF_IDX));
 	for (i = 0; i < 33; i++)
 		writel_relaxed(coefs[i],
@@ -82,7 +82,7 @@ static void meson_vpp_write_vd_scaling_filter_coefs(struct meson_drm *priv,
 {
 	int i;
 
-	writel_relaxed(is_horizontal ? BIT(8) : 0,
+	writel_relaxed(is_horizontal ? VPP_SCALE_HORIZONTAL_COEF : 0,
 			priv->io_base + _REG(VPP_SCALE_COEF_IDX));
 	for (i = 0; i < 33; i++)
 		writel_relaxed(coefs[i],
@@ -97,20 +97,22 @@ void meson_vpp_init(struct meson_drm *priv)
 	else if (meson_vpu_is_compatible(priv, "amlogic,meson-gxm-vpu")) {
 		writel_bits_relaxed(0xff << 16, 0xff << 16,
 				    priv->io_base + _REG(VIU_MISC_CTRL1));
-		writel_relaxed(0x20000, priv->io_base + _REG(VPP_DOLBY_CTRL));
-		writel_relaxed(0x1020080,
+		writel_relaxed(VPP_PPS_DUMMY_DATA_MODE,
+			       priv->io_base + _REG(VPP_DOLBY_CTRL));
+		writel_relaxed(0x108080,
 				priv->io_base + _REG(VPP_DUMMY_DATA1));
 	} else if (meson_vpu_is_compatible(priv, "amlogic,meson-g12a-vpu"))
 		writel_relaxed(0xf, priv->io_base + _REG(DOLBY_PATH_CTRL));
 
 	/* Initialize vpu fifo control registers */
 	if (meson_vpu_is_compatible(priv, "amlogic,meson-g12a-vpu"))
-		writel_relaxed(0xfff << 20 | 0x1000,
+		writel_relaxed(VPP_OFIFO_SIZE_DEFAULT,
 			       priv->io_base + _REG(VPP_OFIFO_SIZE));
 	else
-		writel_relaxed(readl_relaxed(priv->io_base + _REG(VPP_OFIFO_SIZE)) |
-				0x77f, priv->io_base + _REG(VPP_OFIFO_SIZE));
-	writel_relaxed(0x08080808, priv->io_base + _REG(VPP_HOLD_LINES));
+		writel_bits_relaxed(VPP_OFIFO_SIZE_MASK, 0x77f,
+				    priv->io_base + _REG(VPP_OFIFO_SIZE));
+	writel_relaxed(VPP_POSTBLEND_HOLD_LINES(4) | VPP_PREBLEND_HOLD_LINES(4),
+		       priv->io_base + _REG(VPP_HOLD_LINES));
 
 	if (!meson_vpu_is_compatible(priv, "amlogic,meson-g12a-vpu")) {
 		/* Turn off preblend */
@@ -138,10 +140,15 @@ void meson_vpp_init(struct meson_drm *priv)
 	writel_relaxed(0, priv->io_base + _REG(VPP_OSD_SC_CTRL0));
 	writel_relaxed(0, priv->io_base + _REG(VPP_OSD_VSC_CTRL0));
 	writel_relaxed(0, priv->io_base + _REG(VPP_OSD_HSC_CTRL0));
-	writel_relaxed(4 | (4 << 8) | BIT(15),
+
+	/* Set horizontal/vertical bank length and enable video scale out */
+	writel_relaxed(VPP_VSC_BANK_LENGTH(4) | VPP_HSC_BANK_LENGTH(4) |
+		       VPP_SC_VD_EN_ENABLE,
 		       priv->io_base + _REG(VPP_SC_MISC));
 
-	writel_relaxed(1, priv->io_base + _REG(VPP_VADJ_CTRL));
+	/* Enable minus black level for vadj1 */
+	writel_relaxed(VPP_MINUS_BLACK_LVL_VADJ1_ENABLE,
+		       priv->io_base + _REG(VPP_VADJ_CTRL));
 
 	/* Write in the proper filter coefficients. */
 	meson_vpp_write_scaling_filter_coefs(priv,
-- 
2.17.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic