* [PATCH 1/2] ath10k: add modpram 'skip_otp' to ignore empty otp error during BMI
@ 2014-11-07 13:16 ` Rajkumar Manoharan
0 siblings, 0 replies; 10+ messages in thread
From: Rajkumar Manoharan @ 2014-11-07 13:16 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless, Rajkumar Manoharan
This patch would help bring up wifi interface with default board
data in case of failures in otp download. It is useful for initial
caliberation.
Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/core.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 5c23d00..2de49e4 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -31,12 +31,15 @@
unsigned int ath10k_debug_mask;
static bool uart_print;
static unsigned int ath10k_p2p;
+static bool skip_otp;
module_param_named(debug_mask, ath10k_debug_mask, uint, 0644);
module_param(uart_print, bool, 0644);
module_param_named(p2p, ath10k_p2p, uint, 0644);
+module_param(skip_otp, bool, 0644);
MODULE_PARM_DESC(debug_mask, "Debugging mask");
MODULE_PARM_DESC(uart_print, "Uart target debugging");
MODULE_PARM_DESC(p2p, "Enable ath10k P2P support");
+MODULE_PARM_DESC(skip_otp, "Skip otp failure for calibration in testmode");
static const struct ath10k_hw_params ath10k_hw_params_list[] = {
{
@@ -280,7 +283,7 @@ static int ath10k_download_and_run_otp(struct ath10k *ar)
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot otp execute result %d\n", result);
- if (result != 0) {
+ if (!skip_otp && result != 0) {
ath10k_err(ar, "otp calibration failed: %d", result);
return -EINVAL;
}
--
2.1.3
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH 1/2] ath10k: add modpram 'skip_otp' to ignore empty otp error during BMI
@ 2014-11-07 13:16 ` Rajkumar Manoharan
0 siblings, 0 replies; 10+ messages in thread
From: Rajkumar Manoharan @ 2014-11-07 13:16 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless, Rajkumar Manoharan
This patch would help bring up wifi interface with default board
data in case of failures in otp download. It is useful for initial
caliberation.
Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/core.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 5c23d00..2de49e4 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -31,12 +31,15 @@
unsigned int ath10k_debug_mask;
static bool uart_print;
static unsigned int ath10k_p2p;
+static bool skip_otp;
module_param_named(debug_mask, ath10k_debug_mask, uint, 0644);
module_param(uart_print, bool, 0644);
module_param_named(p2p, ath10k_p2p, uint, 0644);
+module_param(skip_otp, bool, 0644);
MODULE_PARM_DESC(debug_mask, "Debugging mask");
MODULE_PARM_DESC(uart_print, "Uart target debugging");
MODULE_PARM_DESC(p2p, "Enable ath10k P2P support");
+MODULE_PARM_DESC(skip_otp, "Skip otp failure for calibration in testmode");
static const struct ath10k_hw_params ath10k_hw_params_list[] = {
{
@@ -280,7 +283,7 @@ static int ath10k_download_and_run_otp(struct ath10k *ar)
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot otp execute result %d\n", result);
- if (result != 0) {
+ if (!skip_otp && result != 0) {
ath10k_err(ar, "otp calibration failed: %d", result);
return -EINVAL;
}
--
2.1.3
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH 2/2] ath10k: Advertise support for AP mode channel width changes
2014-11-07 13:16 ` Rajkumar Manoharan
@ 2014-11-07 13:16 ` Rajkumar Manoharan
-1 siblings, 0 replies; 10+ messages in thread
From: Rajkumar Manoharan @ 2014-11-07 13:16 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless, Rajkumar Manoharan
This will enable AP mode to change channel width dynamically
based on 20/40 intolerance report sent by associated client.
Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/mac.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index a726107..d6799f4 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -4916,6 +4916,7 @@ int ath10k_mac_register(struct ath10k *ar)
ar->hw->wiphy->max_remain_on_channel_duration = 5000;
ar->hw->wiphy->flags |= WIPHY_FLAG_AP_UAPSD;
+ ar->hw->wiphy->features |= NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE;
/*
* on LL hardware queues are managed entirely by the FW
* so we only advertise to mac we can do the queues thing
--
2.1.3
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 2/2] ath10k: Advertise support for AP mode channel width changes
@ 2014-11-07 13:16 ` Rajkumar Manoharan
0 siblings, 0 replies; 10+ messages in thread
From: Rajkumar Manoharan @ 2014-11-07 13:16 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless, Rajkumar Manoharan
This will enable AP mode to change channel width dynamically
based on 20/40 intolerance report sent by associated client.
Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/mac.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index a726107..d6799f4 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -4916,6 +4916,7 @@ int ath10k_mac_register(struct ath10k *ar)
ar->hw->wiphy->max_remain_on_channel_duration = 5000;
ar->hw->wiphy->flags |= WIPHY_FLAG_AP_UAPSD;
+ ar->hw->wiphy->features |= NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE;
/*
* on LL hardware queues are managed entirely by the FW
* so we only advertise to mac we can do the queues thing
--
2.1.3
^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH 2/2] ath10k: Advertise support for AP mode channel width changes
2014-11-07 13:16 ` Rajkumar Manoharan
@ 2014-11-17 14:43 ` Kalle Valo
-1 siblings, 0 replies; 10+ messages in thread
From: Kalle Valo @ 2014-11-17 14:43 UTC (permalink / raw)
To: Rajkumar Manoharan; +Cc: linux-wireless, ath10k
Rajkumar Manoharan <rmanohar@qti.qualcomm.com> writes:
> This will enable AP mode to change channel width dynamically
> based on 20/40 intolerance report sent by associated client.
>
> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
[...]
> --- a/drivers/net/wireless/ath/ath10k/mac.c
> +++ b/drivers/net/wireless/ath/ath10k/mac.c
> @@ -4916,6 +4916,7 @@ int ath10k_mac_register(struct ath10k *ar)
> ar->hw->wiphy->max_remain_on_channel_duration = 5000;
>
> ar->hw->wiphy->flags |= WIPHY_FLAG_AP_UAPSD;
> + ar->hw->wiphy->features |= NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE;
> /*
> * on LL hardware queues are managed entirely by the FW
> * so we only advertise to mac we can do the queues thing
I added newline to here as well:
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -4928,6 +4928,7 @@ int ath10k_mac_register(struct ath10k *ar)
ar->hw->wiphy->flags |= WIPHY_FLAG_AP_UAPSD;
ar->hw->wiphy->features |= NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE;
+
/*
* on LL hardware queues are managed entirely by the FW
* so we only advertise to mac we can do the queues thing
--
Kalle Valo
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: [PATCH 2/2] ath10k: Advertise support for AP mode channel width changes
@ 2014-11-17 14:43 ` Kalle Valo
0 siblings, 0 replies; 10+ messages in thread
From: Kalle Valo @ 2014-11-17 14:43 UTC (permalink / raw)
To: Rajkumar Manoharan; +Cc: ath10k, linux-wireless
Rajkumar Manoharan <rmanohar@qti.qualcomm.com> writes:
> This will enable AP mode to change channel width dynamically
> based on 20/40 intolerance report sent by associated client.
>
> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
[...]
> --- a/drivers/net/wireless/ath/ath10k/mac.c
> +++ b/drivers/net/wireless/ath/ath10k/mac.c
> @@ -4916,6 +4916,7 @@ int ath10k_mac_register(struct ath10k *ar)
> ar->hw->wiphy->max_remain_on_channel_duration = 5000;
>
> ar->hw->wiphy->flags |= WIPHY_FLAG_AP_UAPSD;
> + ar->hw->wiphy->features |= NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE;
> /*
> * on LL hardware queues are managed entirely by the FW
> * so we only advertise to mac we can do the queues thing
I added newline to here as well:
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -4928,6 +4928,7 @@ int ath10k_mac_register(struct ath10k *ar)
ar->hw->wiphy->flags |= WIPHY_FLAG_AP_UAPSD;
ar->hw->wiphy->features |= NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE;
+
/*
* on LL hardware queues are managed entirely by the FW
* so we only advertise to mac we can do the queues thing
--
Kalle Valo
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 1/2] ath10k: add modpram 'skip_otp' to ignore empty otp error during BMI
2014-11-07 13:16 ` Rajkumar Manoharan
@ 2014-11-17 14:41 ` Kalle Valo
-1 siblings, 0 replies; 10+ messages in thread
From: Kalle Valo @ 2014-11-17 14:41 UTC (permalink / raw)
To: Rajkumar Manoharan; +Cc: linux-wireless, ath10k
Rajkumar Manoharan <rmanohar@qti.qualcomm.com> writes:
> This patch would help bring up wifi interface with default board
> data in case of failures in otp download. It is useful for initial
> caliberation.
>
> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
[...]
> --- a/drivers/net/wireless/ath/ath10k/core.c
> +++ b/drivers/net/wireless/ath/ath10k/core.c
> @@ -31,12 +31,15 @@
> unsigned int ath10k_debug_mask;
> static bool uart_print;
> static unsigned int ath10k_p2p;
> +static bool skip_otp;
> module_param_named(debug_mask, ath10k_debug_mask, uint, 0644);
> module_param(uart_print, bool, 0644);
> module_param_named(p2p, ath10k_p2p, uint, 0644);
> +module_param(skip_otp, bool, 0644);
> MODULE_PARM_DESC(debug_mask, "Debugging mask");
> MODULE_PARM_DESC(uart_print, "Uart target debugging");
> MODULE_PARM_DESC(p2p, "Enable ath10k P2P support");
> +MODULE_PARM_DESC(skip_otp, "Skip otp failure for calibration in testmode");
I added back the newlines:
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -32,10 +32,12 @@ unsigned int ath10k_debug_mask;
static bool uart_print;
static unsigned int ath10k_p2p;
static bool skip_otp;
+
module_param_named(debug_mask, ath10k_debug_mask, uint, 0644);
module_param(uart_print, bool, 0644);
module_param_named(p2p, ath10k_p2p, uint, 0644);
module_param(skip_otp, bool, 0644);
+
MODULE_PARM_DESC(debug_mask, "Debugging mask");
MODULE_PARM_DESC(uart_print, "Uart target debugging");
MODULE_PARM_DESC(p2p, "Enable ath10k P2P support");
--
Kalle Valo
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 1/2] ath10k: add modpram 'skip_otp' to ignore empty otp error during BMI
@ 2014-11-17 14:41 ` Kalle Valo
0 siblings, 0 replies; 10+ messages in thread
From: Kalle Valo @ 2014-11-17 14:41 UTC (permalink / raw)
To: Rajkumar Manoharan; +Cc: ath10k, linux-wireless
Rajkumar Manoharan <rmanohar@qti.qualcomm.com> writes:
> This patch would help bring up wifi interface with default board
> data in case of failures in otp download. It is useful for initial
> caliberation.
>
> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
[...]
> --- a/drivers/net/wireless/ath/ath10k/core.c
> +++ b/drivers/net/wireless/ath/ath10k/core.c
> @@ -31,12 +31,15 @@
> unsigned int ath10k_debug_mask;
> static bool uart_print;
> static unsigned int ath10k_p2p;
> +static bool skip_otp;
> module_param_named(debug_mask, ath10k_debug_mask, uint, 0644);
> module_param(uart_print, bool, 0644);
> module_param_named(p2p, ath10k_p2p, uint, 0644);
> +module_param(skip_otp, bool, 0644);
> MODULE_PARM_DESC(debug_mask, "Debugging mask");
> MODULE_PARM_DESC(uart_print, "Uart target debugging");
> MODULE_PARM_DESC(p2p, "Enable ath10k P2P support");
> +MODULE_PARM_DESC(skip_otp, "Skip otp failure for calibration in testmode");
I added back the newlines:
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -32,10 +32,12 @@ unsigned int ath10k_debug_mask;
static bool uart_print;
static unsigned int ath10k_p2p;
static bool skip_otp;
+
module_param_named(debug_mask, ath10k_debug_mask, uint, 0644);
module_param(uart_print, bool, 0644);
module_param_named(p2p, ath10k_p2p, uint, 0644);
module_param(skip_otp, bool, 0644);
+
MODULE_PARM_DESC(debug_mask, "Debugging mask");
MODULE_PARM_DESC(uart_print, "Uart target debugging");
MODULE_PARM_DESC(p2p, "Enable ath10k P2P support");
--
Kalle Valo
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 1/2] ath10k: add modpram 'skip_otp' to ignore empty otp error during BMI
2014-11-07 13:16 ` Rajkumar Manoharan
@ 2014-11-17 14:48 ` Kalle Valo
-1 siblings, 0 replies; 10+ messages in thread
From: Kalle Valo @ 2014-11-17 14:48 UTC (permalink / raw)
To: Rajkumar Manoharan; +Cc: linux-wireless, ath10k
Rajkumar Manoharan <rmanohar@qti.qualcomm.com> writes:
> This patch would help bring up wifi interface with default board
> data in case of failures in otp download. It is useful for initial
> caliberation.
>
> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Thanks, both patches applied.
--
Kalle Valo
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 1/2] ath10k: add modpram 'skip_otp' to ignore empty otp error during BMI
@ 2014-11-17 14:48 ` Kalle Valo
0 siblings, 0 replies; 10+ messages in thread
From: Kalle Valo @ 2014-11-17 14:48 UTC (permalink / raw)
To: Rajkumar Manoharan; +Cc: ath10k, linux-wireless
Rajkumar Manoharan <rmanohar@qti.qualcomm.com> writes:
> This patch would help bring up wifi interface with default board
> data in case of failures in otp download. It is useful for initial
> caliberation.
>
> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Thanks, both patches applied.
--
Kalle Valo
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2014-11-17 14:48 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-11-07 13:16 [PATCH 1/2] ath10k: add modpram 'skip_otp' to ignore empty otp error during BMI Rajkumar Manoharan
2014-11-07 13:16 ` Rajkumar Manoharan
2014-11-07 13:16 ` [PATCH 2/2] ath10k: Advertise support for AP mode channel width changes Rajkumar Manoharan
2014-11-07 13:16 ` Rajkumar Manoharan
2014-11-17 14:43 ` Kalle Valo
2014-11-17 14:43 ` Kalle Valo
2014-11-17 14:41 ` [PATCH 1/2] ath10k: add modpram 'skip_otp' to ignore empty otp error during BMI Kalle Valo
2014-11-17 14:41 ` Kalle Valo
2014-11-17 14:48 ` Kalle Valo
2014-11-17 14:48 ` Kalle Valo
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.