usb: core: introduce per-port over-current counters

[Felipe Balbi <felipe.balbi@linux.intel.com>]

Hi,

Richard Leitner <dev@g0hl1n.net> writes:

> From: Richard Leitner <richard.leitner@skidata.com>
>
> For some userspace applications information on the number of
> over-current conditions at specific USB hub ports is relevant. Therefore
> introduce a oc_counter in the usb port struct which is exported via
> sysfs.

relevant how? What can the application do with that knowledge?

> Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
> ---
> Tested on an i.MX6DL based board.
> ---
>  drivers/usb/core/hub.c  |  4 +++-
>  drivers/usb/core/hub.h  |  1 +
>  drivers/usb/core/port.c | 10 ++++++++++
>  3 files changed, 14 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
> index c5c1f6cf3228..448fba1e1827 100644
> --- a/drivers/usb/core/hub.c
> +++ b/drivers/usb/core/hub.c
> @@ -5104,8 +5104,10 @@ static void port_event(struct usb_hub *hub, int port1)
>  
>  	if (portchange & USB_PORT_STAT_C_OVERCURRENT) {
>  		u16 status = 0, unused;
> +		port_dev->oc_count++;
>  
> -		dev_dbg(&port_dev->dev, "over-current change\n");
> +		dev_dbg(&port_dev->dev, "over-current change #%u\n",
> +			port_dev->oc_count);
>  		usb_clear_port_feature(hdev, port1,
>  				USB_PORT_FEAT_C_OVER_CURRENT);
>  		msleep(100);	/* Cool down */
> diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h
> index 2a700ccc868c..b5cf567bf9e2 100644
> --- a/drivers/usb/core/hub.h
> +++ b/drivers/usb/core/hub.h
> @@ -100,6 +100,7 @@ struct usb_port {
>  	unsigned int is_superspeed:1;
>  	unsigned int usb3_lpm_u1_permit:1;
>  	unsigned int usb3_lpm_u2_permit:1;
> +	unsigned int oc_count;
>  };
>  
>  #define to_usb_port(_dev) \
> diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c
> index 1a01e9ad3804..0bfe410eb8a7 100644
> --- a/drivers/usb/core/port.c
> +++ b/drivers/usb/core/port.c
> @@ -41,6 +41,15 @@ static ssize_t connect_type_show(struct device *dev,
>  }
>  static DEVICE_ATTR_RO(connect_type);
>  
> +static ssize_t oc_count_show(struct device *dev, struct device_attribute *attr,
> +			     char *buf)
> +{
> +	struct usb_port *port_dev = to_usb_port(dev);
> +
> +	return sprintf(buf, "%u\n", port_dev->oc_count);
> +}
> +static DEVICE_ATTR_RO(oc_count);

I would actually spell this out human readable: over_current_count