ath10k-firmware: IPQ4018 hw1.0: Add EnGenius ENS620EXT specific BDFs

ath10k-firmware: IPQ4018 hw1.0: Add EnGenius ENS620EXT specific BDFs

[Steve Glennon]

[-- Attachment #1: Type: text/plain, Size: 1301 bytes --]

 Hi,

I am adding support for this device to OpenWrt. This AP requires 
two special BDFs to get the Wi-Fi PHYs working (correctly). The  bmi-board-
id='s would clash with one of the the IPQ401X AP-DK boards because QCA doesn't 
provide special IDs for customers and seems to use the AP-DK board-ids in the 
wifi firmware to change its behavior.

Now to the questions from the wiki page [1]:

* description for what hardware this is:

  - it is a IPQ4018 based board
  - one QCA40xx radio is used as 2.4GHz radio
  - one QCA40xx radio is used as 5GHz radio

* origin of the board file (did you create it yourself or where you
  downloaded)

  - from stock firmware image

* ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)

  - QCA4019 hw1.0

    + bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=EnGenius-ENS620EXT
      md5sum:
      06b06ff901de575a57b054af238c1335
    + bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=EnGenius-ENS620EXT.bin
      md5sum:
      7cb23e1ff21179de5c4e726552864285

* attach the actual board file (board.bin)

  - The name of the files are equal to the id string in the board-2.bin
    (minus the ".bin")

Kind regards,
        Steve

[1] https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles


[-- Attachment #2: bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=EnGenius-ENS620EXT.bin --]
[-- Type: application/macbinary, Size: 12064 bytes --]

[-- Attachment #3: bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=EnGenius-ENS620EXT.bin --]
[-- Type: application/macbinary, Size: 12064 bytes --]

[-- Attachment #4: Type: text/plain, Size: 146 bytes --]

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

Re: ath10k-firmware: IPQ4018 hw1.0: Add EnGenius ENS620EXT specific BDFs

[Kalle Valo]

Steve Glennon <S.Glennon@cablelabs.com> writes:

> I am adding support for this device to OpenWrt. This AP requires 
> two special BDFs to get the Wi-Fi PHYs working (correctly). The  bmi-board-
> id='s would clash with one of the the IPQ401X AP-DK boards because QCA doesn't 
> provide special IDs for customers and seems to use the AP-DK board-ids in the 
> wifi firmware to change its behavior.
>
> Now to the questions from the wiki page [1]:
>
> * description for what hardware this is:
>
>   - it is a IPQ4018 based board
>   - one QCA40xx radio is used as 2.4GHz radio
>   - one QCA40xx radio is used as 5GHz radio
>
> * origin of the board file (did you create it yourself or where you
>   downloaded)
>
>   - from stock firmware image
>
> * ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
>
>   - QCA4019 hw1.0
>
>     + bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=EnGenius-ENS620EXT
>       md5sum:
>       06b06ff901de575a57b054af238c1335
>     + bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=EnGenius-ENS620EXT.bin
>       md5sum:
>       7cb23e1ff21179de5c4e726552864285
>
> * attach the actual board file (board.bin)
>
>   - The name of the files are equal to the id string in the board-2.bin
>     (minus the ".bin")

Thanks, added to QCA4019/hw1.0/board-2.bin:

New:
bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=EnGenius-ENS620EXT
bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=EnGenius-ENS620EXT

Changed:


Deleted:

2 board image(s) added, 0 changed, 0 deleted, 50 in total

https://github.com/kvalo/ath10k-firmware/commit/30a36dcd3c77668891cf12971f80b5cdb4fa851d

-- 
Kalle Valo

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k