[PATCH v2 1/3] ARM: dts: marvell: armada: Correct indentation

[PATCH v2 1/3] ARM: dts: marvell: armada: Correct indentation

[Krzysztof Kozlowski]

Correct spaces or mix of tabs+spaces into proper tab-indented lines.
No functional impact (same DTB).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>

---

Ongoing bigger work for all bindings and DTS with built-in checker (dt-check-style).
---
 arch/arm/boot/dts/marvell/armada-370.dtsi  |  8 ++++----
 arch/arm/boot/dts/marvell/armada-xp-gp.dts | 14 +++++++-------
 2 files changed, 11 insertions(+), 11 deletions(-)

diff --git a/arch/arm/boot/dts/marvell/armada-370.dtsi b/arch/arm/boot/dts/marvell/armada-370.dtsi
index 2013a5ccecd3..cf73287501da 100644
--- a/arch/arm/boot/dts/marvell/armada-370.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-370.dtsi
@@ -63,8 +63,8 @@ pcie0: pcie@1,0 {
 				interrupt-names = "intx";
 				interrupts-extended = <&mpic 58>;
 				#interrupt-cells = <1>;
-                                ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-                                          0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
 				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 7>;
 				interrupt-map = <0 0 0 1 &pcie0_intc 0>,
@@ -91,8 +91,8 @@ pcie2: pcie@2,0 {
 				interrupt-names = "intx";
 				interrupts-extended = <&mpic 62>;
 				#interrupt-cells = <1>;
-                                ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-                                          0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
 				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 7>;
 				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
diff --git a/arch/arm/boot/dts/marvell/armada-xp-gp.dts b/arch/arm/boot/dts/marvell/armada-xp-gp.dts
index d1d348b91c0a..65cc0373fe04 100644
--- a/arch/arm/boot/dts/marvell/armada-xp-gp.dts
+++ b/arch/arm/boot/dts/marvell/armada-xp-gp.dts
@@ -34,13 +34,13 @@ chosen {
 	memory@0 {
 		device_type = "memory";
 		/*
-                 * 8 GB of plug-in RAM modules by default.The amount
-                 * of memory available can be changed by the
-                 * bootloader according the size of the module
-                 * actually plugged. However, memory between
-                 * 0xF0000000 to 0xFFFFFFFF cannot be used, as it is
-                 * the address range used for I/O (internal registers,
-                 * MBus windows).
+		 * 8 GB of plug-in RAM modules by default.The amount
+		 * of memory available can be changed by the
+		 * bootloader according the size of the module
+		 * actually plugged. However, memory between
+		 * 0xF0000000 to 0xFFFFFFFF cannot be used, as it is
+		 * the address range used for I/O (internal registers,
+		 * MBus windows).
 		 */
 		reg = <0x00000000 0x00000000 0x00000000 0xf0000000>,
 		      <0x00000001 0x00000000 0x00000001 0x00000000>;
-- 
2.53.0

[PATCH v2 2/3] ARM: dts: marvell: kirkwood: Correct indentation

[Krzysztof Kozlowski]

Correct spaces or mix of tabs+spaces into proper tab-indented lines.
No functional impact (same DTB).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>

---

Ongoing bigger work for all bindings and DTS with built-in checker (dt-check-style).

Changes in v2:
1. One more fix in arch/arm/boot/dts/marvell/kirkwood-b3.dts
---
 arch/arm/boot/dts/marvell/kirkwood-b3.dts                     | 4 ++--
 .../arm/boot/dts/marvell/kirkwood-netgear_readynas_duo_v2.dts | 2 +-
 arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi            | 2 +-
 arch/arm/boot/dts/marvell/kirkwood-openblocks_a6.dts          | 2 +-
 arch/arm/boot/dts/marvell/kirkwood-openblocks_a7.dts          | 2 +-
 arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi                 | 2 +-
 6 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/marvell/kirkwood-b3.dts b/arch/arm/boot/dts/marvell/kirkwood-b3.dts
index 681343c1357a..9d5cc1689864 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-b3.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-b3.dts
@@ -94,10 +94,10 @@ i2c@11000 {
 
 		serial@12000 {
 			/* Internal on test pins, 3.3v TTL
-		 	 * UART0_RX = Testpoint 65
+			 * UART0_RX = Testpoint 65
 			 * UART0_TX = Testpoint 66
 			 * See the Excito Wiki for more details.
-		 	 */
+			 */
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/marvell/kirkwood-netgear_readynas_duo_v2.dts b/arch/arm/boot/dts/marvell/kirkwood-netgear_readynas_duo_v2.dts
index cb564c3bcdc4..a9adb777c7a0 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-netgear_readynas_duo_v2.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-netgear_readynas_duo_v2.dts
@@ -239,7 +239,7 @@ ethernet0-port@0 {
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi
index d6b615cf6390..121d84609f20 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi
@@ -83,7 +83,7 @@ &mdio {
 	status = "okay";
 
 	ethphy0: ethernet-phy@X {
-                /* overwrite reg property in board file */
+		/* overwrite reg property in board file */
 	};
 };
 
diff --git a/arch/arm/boot/dts/marvell/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/marvell/kirkwood-openblocks_a6.dts
index 20c6290d2037..82ccc6feaf3c 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-openblocks_a6.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-openblocks_a6.dts
@@ -109,7 +109,7 @@ led-yellow {
 			label = "obsa6:yellow:stat";
 			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
 		};
-        };
+	};
 
 	gpio_keys {
 		compatible = "gpio-keys";
diff --git a/arch/arm/boot/dts/marvell/kirkwood-openblocks_a7.dts b/arch/arm/boot/dts/marvell/kirkwood-openblocks_a7.dts
index 2bc4b68bd723..ff08b01434bf 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-openblocks_a7.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-openblocks_a7.dts
@@ -130,7 +130,7 @@ led-yellow {
 			label = "obsa7:yellow:stat";
 			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
 		};
-        };
+	};
 
 	gpio_keys {
 		compatible = "gpio-keys";
diff --git a/arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi b/arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi
index f136059607b7..6c15e9257de3 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi
@@ -57,7 +57,7 @@ &mdio {
 
 	ethphy1: ethernet-phy@1 {
 		device_type = "ethernet-phy";
-                /* overwrite reg property in board file */
+		/* overwrite reg property in board file */
 	};
 };
 
-- 
2.53.0

[PATCH v2 3/3] ARM: dts: marvell: orion5x: Correct indentation

[Krzysztof Kozlowski]

Correct spaces or mix of tabs+spaces into proper tab-indented lines.
No functional impact (same DTB).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>

---

Ongoing bigger work for all bindings and DTS with built-in checker (dt-check-style).
---
 arch/arm/boot/dts/marvell/orion5x-lacie-d2-network.dts        | 2 +-
 arch/arm/boot/dts/marvell/orion5x-maxtor-shared-storage-2.dts | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/marvell/orion5x-lacie-d2-network.dts b/arch/arm/boot/dts/marvell/orion5x-lacie-d2-network.dts
index 12a4aac2633e..9757c3b57de6 100644
--- a/arch/arm/boot/dts/marvell/orion5x-lacie-d2-network.dts
+++ b/arch/arm/boot/dts/marvell/orion5x-lacie-d2-network.dts
@@ -109,7 +109,7 @@ flash@0 {
 		compatible = "cfi-flash";
 		reg = <0 0x80000>;
 		bank-width = <1>;
-                #address-cells = <1>;
+		#address-cells = <1>;
 		#size-cells = <1>;
 
 		partition@0 {
diff --git a/arch/arm/boot/dts/marvell/orion5x-maxtor-shared-storage-2.dts b/arch/arm/boot/dts/marvell/orion5x-maxtor-shared-storage-2.dts
index cb1bd24b7ae3..b2b3309ed1df 100644
--- a/arch/arm/boot/dts/marvell/orion5x-maxtor-shared-storage-2.dts
+++ b/arch/arm/boot/dts/marvell/orion5x-maxtor-shared-storage-2.dts
@@ -69,7 +69,7 @@ flash@0 {
 		compatible = "cfi-flash";
 		reg = <0 0x40000>;
 		bank-width = <1>;
-                #address-cells = <1>;
+		#address-cells = <1>;
 		#size-cells = <1>;
 	};
 };
-- 
2.53.0

Re: [PATCH v2 1/3] ARM: dts: marvell: armada: Correct indentation

[Gregory CLEMENT]

Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> writes:

> Correct spaces or mix of tabs+spaces into proper tab-indented lines.
> No functional impact (same DTB).
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
>

Applied on mvebu/dt

Thanks,

Gregory
> ---
>
> Ongoing bigger work for all bindings and DTS with built-in checker (dt-check-style).
> ---
>  arch/arm/boot/dts/marvell/armada-370.dtsi  |  8 ++++----
>  arch/arm/boot/dts/marvell/armada-xp-gp.dts | 14 +++++++-------
>  2 files changed, 11 insertions(+), 11 deletions(-)
>
> diff --git a/arch/arm/boot/dts/marvell/armada-370.dtsi b/arch/arm/boot/dts/marvell/armada-370.dtsi
> index 2013a5ccecd3..cf73287501da 100644
> --- a/arch/arm/boot/dts/marvell/armada-370.dtsi
> +++ b/arch/arm/boot/dts/marvell/armada-370.dtsi
> @@ -63,8 +63,8 @@ pcie0: pcie@1,0 {
>  				interrupt-names = "intx";
>  				interrupts-extended = <&mpic 58>;
>  				#interrupt-cells = <1>;
> -                                ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
> -                                          0x81000000 0 0 0x81000000 0x1 0 1 0>;
> +				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
> +					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
>  				bus-range = <0x00 0xff>;
>  				interrupt-map-mask = <0 0 0 7>;
>  				interrupt-map = <0 0 0 1 &pcie0_intc 0>,
> @@ -91,8 +91,8 @@ pcie2: pcie@2,0 {
>  				interrupt-names = "intx";
>  				interrupts-extended = <&mpic 62>;
>  				#interrupt-cells = <1>;
> -                                ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
> -                                          0x81000000 0 0 0x81000000 0x2 0 1 0>;
> +				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
> +					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
>  				bus-range = <0x00 0xff>;
>  				interrupt-map-mask = <0 0 0 7>;
>  				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
> diff --git a/arch/arm/boot/dts/marvell/armada-xp-gp.dts b/arch/arm/boot/dts/marvell/armada-xp-gp.dts
> index d1d348b91c0a..65cc0373fe04 100644
> --- a/arch/arm/boot/dts/marvell/armada-xp-gp.dts
> +++ b/arch/arm/boot/dts/marvell/armada-xp-gp.dts
> @@ -34,13 +34,13 @@ chosen {
>  	memory@0 {
>  		device_type = "memory";
>  		/*
> -                 * 8 GB of plug-in RAM modules by default.The amount
> -                 * of memory available can be changed by the
> -                 * bootloader according the size of the module
> -                 * actually plugged. However, memory between
> -                 * 0xF0000000 to 0xFFFFFFFF cannot be used, as it is
> -                 * the address range used for I/O (internal registers,
> -                 * MBus windows).
> +		 * 8 GB of plug-in RAM modules by default.The amount
> +		 * of memory available can be changed by the
> +		 * bootloader according the size of the module
> +		 * actually plugged. However, memory between
> +		 * 0xF0000000 to 0xFFFFFFFF cannot be used, as it is
> +		 * the address range used for I/O (internal registers,
> +		 * MBus windows).
>  		 */
>  		reg = <0x00000000 0x00000000 0x00000000 0xf0000000>,
>  		      <0x00000001 0x00000000 0x00000001 0x00000000>;
> -- 
> 2.53.0
>

-- 
Grégory CLEMENT, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Re: [PATCH v2 2/3] ARM: dts: marvell: kirkwood: Correct indentation

[Gregory CLEMENT]

Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> writes:

> Correct spaces or mix of tabs+spaces into proper tab-indented lines.
> No functional impact (same DTB).
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
>

Applied on mvebu/dt

Thanks,

Gregory
> ---
>
> Ongoing bigger work for all bindings and DTS with built-in checker (dt-check-style).
>
> Changes in v2:
> 1. One more fix in arch/arm/boot/dts/marvell/kirkwood-b3.dts
> ---
>  arch/arm/boot/dts/marvell/kirkwood-b3.dts                     | 4 ++--
>  .../arm/boot/dts/marvell/kirkwood-netgear_readynas_duo_v2.dts | 2 +-
>  arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi            | 2 +-
>  arch/arm/boot/dts/marvell/kirkwood-openblocks_a6.dts          | 2 +-
>  arch/arm/boot/dts/marvell/kirkwood-openblocks_a7.dts          | 2 +-
>  arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi                 | 2 +-
>  6 files changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/arch/arm/boot/dts/marvell/kirkwood-b3.dts b/arch/arm/boot/dts/marvell/kirkwood-b3.dts
> index 681343c1357a..9d5cc1689864 100644
> --- a/arch/arm/boot/dts/marvell/kirkwood-b3.dts
> +++ b/arch/arm/boot/dts/marvell/kirkwood-b3.dts
> @@ -94,10 +94,10 @@ i2c@11000 {
>  
>  		serial@12000 {
>  			/* Internal on test pins, 3.3v TTL
> -		 	 * UART0_RX = Testpoint 65
> +			 * UART0_RX = Testpoint 65
>  			 * UART0_TX = Testpoint 66
>  			 * See the Excito Wiki for more details.
> -		 	 */
> +			 */
>  			status = "okay";
>  		};
>  
> diff --git a/arch/arm/boot/dts/marvell/kirkwood-netgear_readynas_duo_v2.dts b/arch/arm/boot/dts/marvell/kirkwood-netgear_readynas_duo_v2.dts
> index cb564c3bcdc4..a9adb777c7a0 100644
> --- a/arch/arm/boot/dts/marvell/kirkwood-netgear_readynas_duo_v2.dts
> +++ b/arch/arm/boot/dts/marvell/kirkwood-netgear_readynas_duo_v2.dts
> @@ -239,7 +239,7 @@ ethernet0-port@0 {
>  };
>  
>  &pciec {
> -        status = "okay";
> +	status = "okay";
>  };
>  
>  &pcie0 {
> diff --git a/arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi
> index d6b615cf6390..121d84609f20 100644
> --- a/arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi
> +++ b/arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi
> @@ -83,7 +83,7 @@ &mdio {
>  	status = "okay";
>  
>  	ethphy0: ethernet-phy@X {
> -                /* overwrite reg property in board file */
> +		/* overwrite reg property in board file */
>  	};
>  };
>  
> diff --git a/arch/arm/boot/dts/marvell/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/marvell/kirkwood-openblocks_a6.dts
> index 20c6290d2037..82ccc6feaf3c 100644
> --- a/arch/arm/boot/dts/marvell/kirkwood-openblocks_a6.dts
> +++ b/arch/arm/boot/dts/marvell/kirkwood-openblocks_a6.dts
> @@ -109,7 +109,7 @@ led-yellow {
>  			label = "obsa6:yellow:stat";
>  			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
>  		};
> -        };
> +	};
>  
>  	gpio_keys {
>  		compatible = "gpio-keys";
> diff --git a/arch/arm/boot/dts/marvell/kirkwood-openblocks_a7.dts b/arch/arm/boot/dts/marvell/kirkwood-openblocks_a7.dts
> index 2bc4b68bd723..ff08b01434bf 100644
> --- a/arch/arm/boot/dts/marvell/kirkwood-openblocks_a7.dts
> +++ b/arch/arm/boot/dts/marvell/kirkwood-openblocks_a7.dts
> @@ -130,7 +130,7 @@ led-yellow {
>  			label = "obsa7:yellow:stat";
>  			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
>  		};
> -        };
> +	};
>  
>  	gpio_keys {
>  		compatible = "gpio-keys";
> diff --git a/arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi b/arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi
> index f136059607b7..6c15e9257de3 100644
> --- a/arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi
> +++ b/arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi
> @@ -57,7 +57,7 @@ &mdio {
>  
>  	ethphy1: ethernet-phy@1 {
>  		device_type = "ethernet-phy";
> -                /* overwrite reg property in board file */
> +		/* overwrite reg property in board file */
>  	};
>  };
>  
> -- 
> 2.53.0
>

-- 
Grégory CLEMENT, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Re: [PATCH v2 3/3] ARM: dts: marvell: orion5x: Correct indentation

[Gregory CLEMENT]

Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> writes:

> Correct spaces or mix of tabs+spaces into proper tab-indented lines.
> No functional impact (same DTB).
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
>

Applied on mvebu/dt

Thanks,

Gregory
> ---
>
> Ongoing bigger work for all bindings and DTS with built-in checker (dt-check-style).
> ---
>  arch/arm/boot/dts/marvell/orion5x-lacie-d2-network.dts        | 2 +-
>  arch/arm/boot/dts/marvell/orion5x-maxtor-shared-storage-2.dts | 2 +-
>  2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/marvell/orion5x-lacie-d2-network.dts b/arch/arm/boot/dts/marvell/orion5x-lacie-d2-network.dts
> index 12a4aac2633e..9757c3b57de6 100644
> --- a/arch/arm/boot/dts/marvell/orion5x-lacie-d2-network.dts
> +++ b/arch/arm/boot/dts/marvell/orion5x-lacie-d2-network.dts
> @@ -109,7 +109,7 @@ flash@0 {
>  		compatible = "cfi-flash";
>  		reg = <0 0x80000>;
>  		bank-width = <1>;
> -                #address-cells = <1>;
> +		#address-cells = <1>;
>  		#size-cells = <1>;
>  
>  		partition@0 {
> diff --git a/arch/arm/boot/dts/marvell/orion5x-maxtor-shared-storage-2.dts b/arch/arm/boot/dts/marvell/orion5x-maxtor-shared-storage-2.dts
> index cb1bd24b7ae3..b2b3309ed1df 100644
> --- a/arch/arm/boot/dts/marvell/orion5x-maxtor-shared-storage-2.dts
> +++ b/arch/arm/boot/dts/marvell/orion5x-maxtor-shared-storage-2.dts
> @@ -69,7 +69,7 @@ flash@0 {
>  		compatible = "cfi-flash";
>  		reg = <0 0x40000>;
>  		bank-width = <1>;
> -                #address-cells = <1>;
> +		#address-cells = <1>;
>  		#size-cells = <1>;
>  	};
>  };
> -- 
> 2.53.0
>

-- 
Grégory CLEMENT, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com