From: Lieven Marchand <mal@wyrd.be>
To: Robert Hancock <hancockr@shaw.ca>
Cc: Tejun Heo <htejun@gmail.com>,
jgarzik@pobox.com, linux-ide@vger.kernel.org
Subject: Re: regression problem with Maxtor disk
Date: Wed, 15 Aug 2007 09:34:56 +0200 [thread overview]
Message-ID: <878x8dl07z.fsf@wyrd.be> (raw)
In-Reply-To: <46C23746.6030203@shaw.ca> (Robert Hancock's message of "Tue, 14 Aug 2007 17:14:14 -0600")
Robert Hancock <hancockr@shaw.ca> writes:
> It looks like there are some lines missing from this log, there should
> be a line before the "res" lines indicating what the failed command
> was..
There isn't. I snipped some irrelevant stuff but nothing about a
command. The full log is appended.
> My guess, though, is that NCQ is somehow busted on this drive, as is
> known to be the case with a number of other Maxtor disks..
Aug 11 10:27:51 black kernel: sata_nv 0000:00:07.0: Using ADMA mode
Aug 11 10:27:51 black kernel: scsi3 : sata_nv
Aug 11 10:27:51 black kernel: scsi4 : sata_nv
Aug 11 10:27:51 black kernel: ata1: SATA max UDMA/133 cmd 0xf8840480 ctl 0xf88404a0 bmdma 0x0001cc00 irq 19
Aug 11 10:27:51 black kernel: ata2: SATA max UDMA/133 cmd 0xf8840580 ctl 0xf88405a0 bmdma 0x0001cc08 irq 19
Aug 11 10:27:51 black kernel: hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Aug 11 10:27:51 black kernel: Uniform CD-ROM driver Revision: 3.20
Aug 11 10:27:51 black kernel: hdb: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(66)
Aug 11 10:27:51 black kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Aug 11 10:27:51 black kernel: ata1.00: ATA-7: MAXTOR STM3320820AS, 3.AAE, max UDMA/133
Aug 11 10:27:51 black kernel: ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
Aug 11 10:27:51 black kernel: ata1.00: configured for UDMA/133
Aug 11 10:27:51 black kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Aug 11 10:27:51 black kernel: ata2.00: ATA-7: Maxtor 7H500F0, HA431DN0, max UDMA/133
Aug 11 10:27:51 black kernel: ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
Aug 11 10:27:51 black kernel: ata2.00: configured for UDMA/133
Aug 11 10:27:51 black kernel: scsi 3:0:0:0: Direct-Access ATA MAXTOR STM332082 3.AA PQ: 0 ANSI: 5
Aug 11 10:27:51 black kernel: ata1: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
Aug 11 10:27:51 black kernel: scsi 4:0:0:0: Direct-Access ATA Maxtor 7H500F0 HA43 PQ: 0 ANSI: 5
Aug 11 10:27:51 black kernel: ata2: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
Aug 11 10:27:51 black kernel: ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23
Aug 11 10:27:51 black kernel: ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 23 (level, low) -> IRQ 16
Aug 11 10:27:51 black kernel: sata_nv 0000:00:08.0: Using ADMA mode
Aug 11 10:27:51 black kernel: scsi5 : sata_nv
Aug 11 10:27:51 black kernel: scsi6 : sata_nv
Aug 11 10:27:51 black kernel: ata3: SATA max UDMA/133 cmd 0xf88de480 ctl 0xf88de4a0 bmdma 0x0001b800 irq 16
Aug 11 10:27:51 black kernel: ata4: SATA max UDMA/133 cmd 0xf88de580 ctl 0xf88de5a0 bmdma 0x0001b808 irq 16
Aug 11 10:27:51 black kernel: ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Aug 11 10:27:51 black kernel: ata3.00: ATA-7: Maxtor 6Y200M0, YAR51HW0, max UDMA/133
Aug 11 10:27:51 black kernel: ata3.00: 398297088 sectors, multi 16: LBA48
Aug 11 10:27:51 black kernel: ata3.00: configured for UDMA/133
Aug 11 10:27:51 black kernel: ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Aug 11 10:27:51 black kernel: ata4.00: ATA-7: Maxtor 6B300S0, BANC1980, max UDMA/133
Aug 11 10:27:51 black kernel: ata4.00: 586114704 sectors, multi 16: LBA48 NCQ (depth 31/32)
Aug 11 10:27:51 black kernel: ata4.00: configured for UDMA/133
Aug 11 10:27:51 black kernel: scsi 5:0:0:0: Direct-Access ATA Maxtor 6Y200M0 YAR5 PQ: 0 ANSI: 5
Aug 11 10:27:51 black kernel: ata3: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
Aug 11 10:27:51 black kernel: scsi 6:0:0:0: Direct-Access ATA Maxtor 6B300S0 BANC PQ: 0 ANSI: 5
Aug 11 10:27:51 black kernel: ata4: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
Aug 11 10:27:51 black kernel: sd 3:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
Aug 11 10:27:51 black kernel: sd 3:0:0:0: [sda] Write Protect is off
Aug 11 10:27:51 black kernel: sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 11 10:27:51 black kernel: sd 3:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
Aug 11 10:27:51 black kernel: sd 3:0:0:0: [sda] Write Protect is off
Aug 11 10:27:51 black kernel: sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 11 10:27:51 black kernel: sda: sda1
Aug 11 10:27:51 black kernel: sd 3:0:0:0: [sda] Attached SCSI disk
Aug 11 10:27:51 black kernel: sd 4:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
Aug 11 10:27:51 black kernel: sd 4:0:0:0: [sdb] Write Protect is off
Aug 11 10:27:51 black kernel: sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
Aug 11 10:27:51 black kernel: sd 4:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
Aug 11 10:27:51 black kernel: sd 4:0:0:0: [sdb] Write Protect is off
Aug 11 10:27:51 black kernel: sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
Aug 11 10:27:51 black kernel: sdb: sdb1 sdb2 < sdb5 sdb6 >
Aug 11 10:27:51 black kernel: sd 4:0:0:0: [sdb] Attached SCSI disk
Aug 11 10:27:51 black kernel: sd 5:0:0:0: [sdc] 398297088 512-byte hardware sectors (203928 MB)
Aug 11 10:27:51 black kernel: sd 5:0:0:0: [sdc] Write Protect is off
Aug 11 10:27:51 black kernel: sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 11 10:27:51 black kernel: sd 5:0:0:0: [sdc] 398297088 512-byte hardware sectors (203928 MB)
Aug 11 10:27:51 black kernel: sd 5:0:0:0: [sdc] Write Protect is off
Aug 11 10:27:51 black kernel: sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 11 10:27:51 black kernel: sdc: sdc1 sdc2 sdc3 < sdc5 sdc6 >
Aug 11 10:27:51 black kernel: sd 5:0:0:0: [sdc] Attached SCSI disk
Aug 11 10:27:51 black kernel: sd 6:0:0:0: [sdd] 586114704 512-byte hardware sectors (300091 MB)
Aug 11 10:27:51 black kernel: sd 6:0:0:0: [sdd] Write Protect is off
Aug 11 10:27:51 black kernel: sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 11 10:27:51 black kernel: sd 6:0:0:0: [sdd] 586114704 512-byte hardware sectors (300091 MB)
Aug 11 10:27:51 black kernel: sd 6:0:0:0: [sdd] Write Protect is off
Aug 11 10:27:51 black kernel: sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 11 10:27:51 black kernel: sdd: sdd1 sdd2
Aug 11 10:27:51 black kernel: sd 6:0:0:0: [sdd] Attached SCSI disk
Aug 11 10:27:51 black kernel: device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
Aug 11 10:27:51 black kernel: kjournald starting. Commit interval 5 seconds
Aug 11 10:27:51 black kernel: EXT3-fs: mounted filesystem with ordered data mode.
Aug 11 10:27:51 black kernel: scsi 1:0:0:0: Direct-Access Seagate External Drive PQ: 0 ANSI: 0
Aug 11 10:27:51 black kernel: scsi 0:0:0:0: Direct-Access USB 2.0 Storage Device 0100 PQ: 0 ANSI: 0 CCS
Aug 11 10:27:51 black kernel: sd 0:0:0:0: [sde] 320173056 512-byte hardware sectors (163929 MB)
Aug 11 10:27:51 black kernel: sd 0:0:0:0: [sde] Write Protect is off
Aug 11 10:27:51 black kernel: sd 0:0:0:0: [sde] 320173056 512-byte hardware sectors (163929 MB)
Aug 11 10:27:51 black kernel: scsi 2:0:0:0: Direct-Access ST332082 0A 3.AA PQ: 0 ANSI: 0
Aug 11 10:27:51 black kernel: sd 0:0:0:0: [sde] Write Protect is off
Aug 11 10:27:51 black kernel: sde: sde1
Aug 11 10:27:51 black kernel: sd 0:0:0:0: [sde] Attached SCSI disk
Aug 11 10:27:51 black kernel: sd 2:0:0:0: [sdf] 625142448 512-byte hardware sectors (320073 MB)
Aug 11 10:27:51 black kernel: sd 2:0:0:0: [sdf] Write Protect is off
Aug 11 10:27:51 black kernel: sd 2:0:0:0: [sdf] 625142448 512-byte hardware sectors (320073 MB)
Aug 11 10:27:51 black kernel: sd 2:0:0:0: [sdf] Write Protect is off
Aug 11 10:27:51 black kernel: sdf:<6>i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00
Aug 11 10:27:51 black kernel: i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40
Aug 11 10:27:51 black kernel: input: PC Speaker as /class/input/input1
Aug 11 10:27:51 black kernel: Real Time Clock Driver v1.12ac
Aug 11 10:27:51 black kernel: ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
Aug 11 10:27:51 black kernel: ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 22 (level, low) -> IRQ 17
Aug 11 10:27:51 black kernel: NET: Registered protocol family 23
Aug 11 10:27:51 black kernel: intel8x0_measure_ac97_clock: measured 54821 usecs
Aug 11 10:27:51 black kernel: intel8x0: clocking to 46989
Aug 11 10:27:51 black kernel: input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
Aug 11 10:27:51 black kernel: parport_pc 00:0a: reported by Plug and Play ACPI
Aug 11 10:27:51 black kernel: parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
Aug 11 10:27:51 black kernel: sdf1
Aug 11 10:27:51 black kernel: sd 2:0:0:0: [sdf] Attached SCSI disk
Aug 11 10:27:51 black kernel: sd 1:0:0:0: [sdg] 312581808 512-byte hardware sectors (160042 MB)
Aug 11 10:27:51 black kernel: sd 1:0:0:0: [sdg] Write Protect is off
Aug 11 10:27:51 black kernel: sd 1:0:0:0: [sdg] 312581808 512-byte hardware sectors (160042 MB)
Aug 11 10:27:51 black kernel: sd 1:0:0:0: [sdg] Write Protect is off
Aug 11 10:27:51 black kernel: sdg: sdg1 sdg2 sdg3
Aug 11 10:27:51 black kernel: sd 1:0:0:0: [sdg] Attached SCSI disk
Aug 11 10:27:51 black kernel: Adding 3036244k swap on /dev/sdb5. Priority:-1 extents:1 across:3036244k
Aug 11 10:27:51 black kernel: ata2: timeout waiting for ADMA IDLE, stat=0x440
Aug 11 10:27:51 black kernel: res 51/04:00:00:00:00/04:00:00:00:00/40 Emask 0x1 (device error)
Aug 11 10:27:51 black kernel: ata2.00: configured for UDMA/133
Aug 11 10:27:51 black kernel: ata2: EH complete
Aug 11 10:27:51 black kernel: sd 4:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
Aug 11 10:27:51 black kernel: sd 4:0:0:0: [sdb] Write Protect is off
Aug 11 10:27:51 black kernel: sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
Aug 11 10:27:51 black kernel: EXT3 FS on dm-0, internal journal
Aug 11 10:27:51 black kernel: kjournald starting. Commit interval 5 seconds
Aug 11 10:27:51 black kernel: EXT3 FS on sdb1, internal journal
Aug 11 10:27:51 black kernel: EXT3-fs: mounted filesystem with ordered data mode.
Aug 11 10:27:51 black kernel: kjournald starting. Commit interval 5 seconds
Aug 11 10:27:51 black kernel: EXT3 FS on dm-4, internal journal
Aug 11 10:27:51 black kernel: EXT3-fs: mounted filesystem with ordered data mode.
Aug 11 10:27:51 black kernel: kjournald starting. Commit interval 5 seconds
Aug 11 10:27:51 black kernel: EXT3 FS on dm-3, internal journal
Aug 11 10:27:51 black kernel: EXT3-fs: mounted filesystem with ordered data mode.
Aug 11 10:27:51 black kernel: kjournald starting. Commit interval 5 seconds
Aug 11 10:27:51 black kernel: EXT3 FS on dm-1, internal journal
Aug 11 10:27:51 black kernel: EXT3-fs: mounted filesystem with ordered data mode.
Aug 11 10:27:51 black kernel: kjournald starting. Commit interval 5 seconds
Aug 11 10:27:51 black kernel: EXT3 FS on dm-2, internal journal
Aug 11 10:27:51 black kernel: EXT3-fs: mounted filesystem with ordered data mode.
Aug 11 10:27:51 black kernel: kjournald starting. Commit interval 5 seconds
Aug 11 10:27:51 black kernel: EXT3 FS on sdd1, internal journal
Aug 11 10:27:51 black kernel: EXT3-fs: mounted filesystem with ordered data mode.
Aug 11 10:27:51 black kernel: kjournald starting. Commit interval 5 seconds
Aug 11 10:27:51 black kernel: EXT3 FS on sda1, internal journal
Aug 11 10:27:51 black kernel: EXT3-fs: mounted filesystem with ordered data mode.
Aug 11 10:27:51 black kernel: kjournald starting. Commit interval 5 seconds
Aug 11 10:27:51 black kernel: EXT3 FS on sdd2, internal journal
Aug 11 10:27:51 black kernel: EXT3-fs: mounted filesystem with ordered data mode.
Aug 11 10:27:51 black kernel: ata2: timeout waiting for ADMA IDLE, stat=0x440
Aug 11 10:27:51 black kernel: res 51/04:00:00:00:00/04:00:00:00:00/40 Emask 0x1 (device error)
Aug 11 10:27:51 black last message repeated 2 times
Aug 11 10:27:51 black kernel: ata2.00: configured for UDMA/133
Aug 11 10:27:51 black kernel: ata2: EH complete
Aug 11 10:27:51 black kernel: ata2: timeout waiting for ADMA LEGACY clear and IDLE, stat=0x440
Aug 11 10:27:51 black kernel: sd 4:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
Aug 11 10:27:51 black kernel: sd 4:0:0:0: [sdb] Write Protect is off
Aug 11 10:27:51 black kernel: sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
Aug 11 10:27:51 black kernel: ata2: timeout waiting for ADMA IDLE, stat=0x400
Aug 11 10:27:51 black kernel: ata2: timeout waiting for ADMA LEGACY, stat=0x400
Aug 11 10:27:51 black kernel: res 40/00:00:00:00:00/04:00:00:00:00/40 Emask 0x4 (timeout)
Aug 11 10:27:51 black last message repeated 2 times
Aug 11 10:27:51 black kernel: res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Aug 11 10:27:51 black kernel: ata2: soft resetting port
Aug 11 10:27:51 black kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Aug 11 10:27:51 black kernel: ata2.00: configured for UDMA/133
Aug 11 10:27:51 black kernel: ata2: EH complete
Aug 11 10:27:51 black kernel: ata2: timeout waiting for ADMA LEGACY clear and IDLE, stat=0x400
Aug 11 10:27:51 black kernel: sd 4:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
Aug 11 10:27:51 black kernel: sd 4:0:0:0: [sdb] Write Protect is off
Aug 11 10:27:51 black kernel: sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
Aug 11 10:27:51 black kernel: ata2: timeout waiting for ADMA IDLE, stat=0x400
Aug 11 10:27:51 black kernel: ata2: timeout waiting for ADMA LEGACY, stat=0x400
Aug 11 10:27:51 black kernel: ata2.00: NCQ disabled due to excessive errors
Aug 11 10:27:51 black kernel: res 40/00:00:00:00:00/04:00:00:00:00/40 Emask 0x4 (timeout)
Aug 11 10:27:51 black last message repeated 2 times
Aug 11 10:27:51 black kernel: res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Aug 11 10:27:51 black kernel: ata2: soft resetting port
Aug 11 10:27:51 black kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Aug 11 10:27:51 black kernel: ata2.00: configured for UDMA/133
Aug 11 10:27:51 black kernel: ata2: EH complete
Aug 11 10:27:51 black kernel: ata2: timeout waiting for ADMA LEGACY clear and IDLE, stat=0x400
Aug 11 10:27:51 black kernel: ata2: timeout waiting for ADMA IDLE, stat=0x400
Aug 11 10:27:51 black kernel: ata2: timeout waiting for ADMA LEGACY, stat=0x400
Aug 11 10:27:51 black kernel: res 40/00:00:00:00:00/04:00:00:00:00/40 Emask 0x4 (timeout)
Aug 11 10:27:51 black kernel: ata2: soft resetting port
Aug 11 10:27:51 black kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Aug 11 10:27:51 black kernel: ata2.00: configured for UDMA/133
Aug 11 10:27:51 black kernel: ata2: EH complete
Aug 11 10:27:51 black kernel: sd 4:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
Aug 11 10:27:51 black kernel: sd 4:0:0:0: [sdb] Write Protect is off
Aug 11 10:27:51 black kernel: sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
Aug 11 10:27:51 black kernel: sd 4:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
Aug 11 10:27:51 black kernel: sd 4:0:0:0: [sdb] Write Protect is off
Aug 11 10:27:51 black kernel: sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
Aug 11 10:27:51 black kernel: input: Power Button (FF) as /class/input/input3
Aug 11 10:27:51 black kernel: ACPI: Power Button (FF) [PWRF]
Aug 11 10:27:51 black kernel: input: Power Button (CM) as /class/input/input4
Aug 11 10:27:51 black kernel: ACPI: Power Button (CM) [PWRB]
Aug 11 10:27:53 black kernel: NET: Registered protocol family 10
Aug 11 10:27:53 black kernel: lo: Disabled Privacy Extensions
Aug 11 10:28:35 black kernel: Linux agpgart interface v0.102 (c) Dave Jones
next prev parent reply other threads:[~2007-08-15 8:08 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-08-12 14:14 regression problem with Maxtor disk Lieven Marchand
2007-08-14 9:50 ` Tejun Heo
2007-08-14 23:14 ` Robert Hancock
2007-08-15 7:34 ` Lieven Marchand [this message]
2007-08-15 7:53 ` Tejun Heo
2007-08-15 21:22 ` Lieven Marchand
2007-08-15 23:31 ` Robert Hancock
-- strict thread matches above, loose matches on Subject: below --
2007-08-12 23:36 babl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=878x8dl07z.fsf@wyrd.be \
--to=mal@wyrd.be \
--cc=hancockr@shaw.ca \
--cc=htejun@gmail.com \
--cc=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.