From: Lieven Marchand <mal@wyrd.be>
To: jgarzik@pobox.com
Cc: linux-ide@vger.kernel.org
Subject: regression problem with Maxtor disk
Date: Sun, 12 Aug 2007 16:14:06 +0200 [thread overview]
Message-ID: <87tzr4zvpt.fsf@wyrd.be> (raw)
Hi,
the following drive
Aug 12 12:26:15 black kernel: Vendor: ATA Model: Maxtor 7H500F0 Rev:
HA43
Aug 12 12:26:15 black kernel: Type: Direct-Access ANSI
SCSI revision: 05
works fine under 2.6.18 and crashes the boot procedure under
2.6.22. Occasionally the boot continues but most of the times the
kernel crashes with an error message of a corrupt cpu context.
I've added the logs of a succesful boot here. When such a boot
succeeds, the system is noticeably slower than under 2.6.18.
Aug 11 10:27:51 black kernel: scsi 4:0:0:0: Direct-Access ATA Maxtor 7H
500F0 HA43 PQ: 0 ANSI: 5
Aug 11 10:27:51 black kernel: ata2: bounce limit 0xFFFFFFFFFFFFFFFF, segment bou
ndary 0xFFFFFFFF, hw segs 61
Aug 11 10:27:51 black kernel: ata2: timeout waiting for ADMA IDLE, stat=0x440
Aug 11 10:27:51 black kernel: res 51/04:00:00:00:00/04:00:00:00:00/40 E
mask 0x1 (device error)
Aug 11 10:27:51 black kernel: ata2.00: configured for UDMA/133
Aug 11 10:27:51 black kernel: ata2: EH complete
Aug 11 10:27:51 black kernel: ata2: timeout waiting for ADMA IDLE, stat=0x440
Aug 11 10:27:51 black kernel: res 51/04:00:00:00:00/04:00:00:00:00/40 E
mask 0x1 (device error)
Aug 11 10:27:51 black last message repeated 2 times
Aug 11 10:27:51 black kernel: ata2.00: configured for UDMA/133
Aug 11 10:27:51 black kernel: ata2: EH complete
Aug 11 10:27:51 black kernel: ata2: timeout waiting for ADMA LEGACY clear and ID
LE, stat=0x440
Aug 11 10:27:51 black kernel: ata2: timeout waiting for ADMA IDLE, stat=0x400
Aug 11 10:27:51 black kernel: ata2: timeout waiting for ADMA LEGACY, stat=0x400
Aug 11 10:27:51 black kernel: res 40/00:00:00:00:00/04:00:00:00:00/40 E
mask 0x4 (timeout)
Aug 11 10:27:51 black last message repeated 2 times
Aug 11 10:27:51 black kernel: res 40/00:00:00:00:00/00:00:00:00:00/00 E
mask 0x4 (timeout)
Aug 11 10:27:51 black kernel: ata2: soft resetting port
Aug 11 10:27:51 black kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl
300)
Aug 11 10:27:51 black kernel: ata2.00: configured for UDMA/133
Aug 11 10:27:51 black kernel: ata2: EH complete
Aug 11 10:27:51 black kernel: ata2: timeout waiting for ADMA LEGACY clear and ID
LE, stat=0x400
Aug 11 10:27:51 black kernel: ata2: timeout waiting for ADMA IDLE, stat=0x400
Aug 11 10:27:51 black kernel: ata2: timeout waiting for ADMA LEGACY, stat=0x400
Aug 11 10:27:51 black kernel: ata2.00: NCQ disabled due to excessive errors
Aug 11 10:27:51 black kernel: res 40/00:00:00:00:00/04:00:00:00:00/40 E
mask 0x4 (timeout)
Aug 11 10:27:51 black last message repeated 2 times
Aug 11 10:27:51 black kernel: res 40/00:00:00:00:00/00:00:00:00:00/00 E
mask 0x4 (timeout)
Aug 11 10:27:51 black kernel: ata2: soft resetting port
Aug 11 10:27:51 black kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl
300)
Aug 11 10:27:51 black kernel: ata2.00: configured for UDMA/133
Aug 11 10:27:51 black kernel: ata2: EH complete
Aug 11 10:27:51 black kernel: ata2: timeout waiting for ADMA LEGACY clear and ID
LE, stat=0x400
Aug 11 10:27:51 black kernel: ata2: timeout waiting for ADMA IDLE, stat=0x400
Aug 11 10:27:51 black kernel: ata2: timeout waiting for ADMA LEGACY, stat=0x400
Aug 11 10:27:51 black kernel: res 40/00:00:00:00:00/04:00:00:00:00/40 E
mask 0x4 (timeout)
Aug 11 10:27:51 black kernel: ata2: soft resetting port
Aug 11 10:27:51 black kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl
300)
Aug 11 10:27:51 black kernel: ata2.00: configured for UDMA/133
Aug 11 10:27:51 black kernel: ata2: EH complete
next reply other threads:[~2007-08-12 14:58 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-08-12 14:14 Lieven Marchand [this message]
2007-08-14 9:50 ` regression problem with Maxtor disk Tejun Heo
2007-08-14 23:14 ` Robert Hancock
2007-08-15 7:34 ` Lieven Marchand
2007-08-15 7:53 ` Tejun Heo
2007-08-15 21:22 ` Lieven Marchand
2007-08-15 23:31 ` Robert Hancock
-- strict thread matches above, loose matches on Subject: below --
2007-08-12 23:36 babl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87tzr4zvpt.fsf@wyrd.be \
--to=mal@wyrd.be \
--cc=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.