From: Lieven Marchand <mal@wyrd.be>
To: Tejun Heo <htejun@gmail.com>
Cc: Robert Hancock <hancockr@shaw.ca>,
jgarzik@pobox.com, linux-ide@vger.kernel.org
Subject: Re: regression problem with Maxtor disk
Date: Wed, 15 Aug 2007 23:22:25 +0200 [thread overview]
Message-ID: <87wsvw8pda.fsf@wyrd.be> (raw)
In-Reply-To: <46C2B0FD.5030101@gmail.com> (Tejun Heo's message of "Wed, 15 Aug 2007 16:53:33 +0900")
Tejun Heo <htejun@gmail.com> writes:
> It seems klogd clipped some messages. Can you please turn on printk
> timestamp, enlarge printk log buffersize and post the result of 'dmesg'
> after errors?
[ 33.587986] libata version 2.21 loaded.
[ 33.592361] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
[ 33.592411] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 21 (level, low) -> IRQ 18
[ 33.592508] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[ 33.592516] forcedeth: using HIGHDMA
[ 33.633334] hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 33.633558] Uniform CD-ROM driver Revision: 3.20
[ 33.638683] hdb: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(66)
[ 34.109811] eth0: forcedeth.c: subsystem: 01695:1010 bound to 0000:00:0a.0
[ 34.109949] sata_nv 0000:00:07.0: version 3.4
[ 34.110368] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
[ 34.110414] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 20 (level, low) -> IRQ 19
[ 34.110509] sata_nv 0000:00:07.0: Using ADMA mode
[ 34.110587] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 34.110849] scsi0 : sata_nv
[ 34.110922] scsi1 : sata_nv
[ 34.110973] ata1: SATA max UDMA/133 cmd 0xf883e480 ctl 0xf883e4a0 bmdma 0x0001cc00 irq 19
[ 34.111026] ata2: SATA max UDMA/133 cmd 0xf883e580 ctl 0xf883e5a0 bmdma 0x0001cc08 irq 19
[ 34.129549] usb 2-1: new high speed USB device using ehci_hcd and address 2
[ 34.322380] usb 2-1: configuration #1 chosen from 1 choice
[ 34.336790] Initializing USB Mass Storage driver...
[ 34.560984] usb 2-2: new high speed USB device using ehci_hcd and address 3
[ 34.576963] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 34.586151] ata1.00: ATA-7: Maxtor 7H500F0, HA431DN0, max UDMA/133
[ 34.586191] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 34.602085] ata1.00: configured for UDMA/133
[ 34.695412] usb 2-2: configuration #1 chosen from 1 choice
[ 34.932499] usb 2-4: new high speed USB device using ehci_hcd and address 4
[ 35.068325] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 35.116969] ata2.00: ATA-7: MAXTOR STM3320820AS, 3.AAE, max UDMA/133
[ 35.117010] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 35.147355] usb 2-4: configuration #1 chosen from 1 choice
[ 35.149712] scsi2 : SCSI emulation for USB Mass Storage devices
[ 35.149993] usb-storage: device found at 2
[ 35.149995] usb-storage: waiting for device to settle before scanning
[ 35.150009] scsi3 : SCSI emulation for USB Mass Storage devices
[ 35.150201] usb-storage: device found at 3
[ 35.150203] usb-storage: waiting for device to settle before scanning
[ 35.150216] scsi4 : SCSI emulation for USB Mass Storage devices
[ 35.150406] usbcore: registered new interface driver usb-storage
[ 35.150447] USB Mass Storage support registered.
[ 35.150491] usb-storage: device found at 4
[ 35.150493] usb-storage: waiting for device to settle before scanning
[ 35.183534] ata2.00: configured for UDMA/133
[ 35.183676] scsi 0:0:0:0: Direct-Access ATA Maxtor 7H500F0 HA43 PQ: 0 ANSI: 5
[ 35.183734] ata1: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
[ 35.184076] scsi 1:0:0:0: Direct-Access ATA MAXTOR STM332082 3.AA PQ: 0 ANSI: 5
[ 35.184130] ata2: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
[ 35.184627] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23
[ 35.184668] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 23 (level, low) -> IRQ 16
[ 35.184764] sata_nv 0000:00:08.0: Using ADMA mode
[ 35.184843] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 35.184933] scsi5 : sata_nv
[ 35.184996] scsi6 : sata_nv
[ 35.185050] ata3: SATA max UDMA/133 cmd 0xf88a0480 ctl 0xf88a04a0 bmdma 0x0001b800 irq 16
[ 35.185102] ata4: SATA max UDMA/133 cmd 0xf88a0580 ctl 0xf88a05a0 bmdma 0x0001b808 irq 16
[ 35.651571] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 35.660568] ata3.00: ATA-7: Maxtor 6B300S0, BANC1980, max UDMA/133
[ 35.660608] ata3.00: 586114704 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 35.676553] ata3.00: configured for UDMA/133
[ 35.987125] ata4: SATA link down (SStatus 0 SControl 300)
[ 35.987235] scsi 5:0:0:0: Direct-Access ATA Maxtor 6B300S0 BANC PQ: 0 ANSI: 5
[ 35.987289] ata3: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
[ 36.023244] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[ 36.023297] sd 0:0:0:0: [sda] Write Protect is off
[ 36.023336] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 36.023347] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 36.023439] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[ 36.023484] sd 0:0:0:0: [sda] Write Protect is off
[ 36.023522] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 36.023531] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 36.023584] sda: sda1 sda2 < sda5 sda6 sda7 >
[ 36.075908] sd 0:0:0:0: [sda] Attached SCSI disk
[ 36.076642] sd 1:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
[ 36.078107] sd 1:0:0:0: [sdb] Write Protect is off
[ 36.078145] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 36.078155] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 36.078230] sd 1:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
[ 36.078274] sd 1:0:0:0: [sdb] Write Protect is off
[ 36.078312] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 36.078322] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 36.078374] sdb: sdb1
[ 36.096793] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 36.097148] sd 5:0:0:0: [sdc] 586114704 512-byte hardware sectors (300091 MB)
[ 36.097193] sd 5:0:0:0: [sdc] Write Protect is off
[ 36.097231] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 36.097241] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 36.097318] sd 5:0:0:0: [sdc] 586114704 512-byte hardware sectors (300091 MB)
[ 36.097363] sd 5:0:0:0: [sdc] Write Protect is off
[ 36.097401] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 36.097410] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 36.097462] sdc: sdc1 sdc2
[ 36.116596] sd 5:0:0:0: [sdc] Attached SCSI disk
[ 36.488949] Probing IDE interface ide1...
[ 37.067405] md: raid1 personality registered for level 1
[ 37.082723] md: md0 stopped.
[ 37.112993] md: bind<sdc2>
[ 37.113130] md: bind<sda7>
[ 37.123391] raid1: raid set md0 active with 2 out of 2 mirrors
[ 37.302653] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
[ 37.905627] kjournald starting. Commit interval 5 seconds
[ 37.905678] EXT3-fs: mounted filesystem with ordered data mode.
[ 39.355192] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00
[ 39.355256] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40
[ 40.023669] Real Time Clock Driver v1.12ac
[ 40.047120] input: PC Speaker as /class/input/input1
[ 40.079840] irda_init()
[ 40.079860] NET: Registered protocol family 23
[ 40.108430] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
[ 40.108475] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 22 (level, low) -> IRQ 17
[ 40.108588] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 40.141895] usb-storage: device scan complete
[ 40.142136] usb-storage: device scan complete
[ 40.142171] usb-storage: device scan complete
[ 40.144889] scsi 3:0:0:0: Direct-Access Seagate External Drive PQ: 0 ANSI: 0
[ 40.157610] scsi 2:0:0:0: Direct-Access USB 2.0 Storage Device 0100 PQ: 0 ANSI: 0 CCS
[ 40.163346] sd 2:0:0:0: [sdd] 320173056 512-byte hardware sectors (163929 MB)
[ 40.165091] sd 2:0:0:0: [sdd] Write Protect is off
[ 40.165129] sd 2:0:0:0: [sdd] Mode Sense: 08 00 00 00
[ 40.165132] sd 2:0:0:0: [sdd] Assuming drive cache: write through
[ 40.170335] sd 2:0:0:0: [sdd] 320173056 512-byte hardware sectors (163929 MB)
[ 40.172150] sd 2:0:0:0: [sdd] Write Protect is off
[ 40.172188] sd 2:0:0:0: [sdd] Mode Sense: 08 00 00 00
[ 40.172190] sd 2:0:0:0: [sdd] Assuming drive cache: write through
[ 40.172230] sdd:<5>scsi 4:0:0:0: Direct-Access ST332082 0A 3.AA PQ: 0 ANSI: 0
[ 40.181832] sdd1
[ 40.181923] sd 2:0:0:0: [sdd] Attached SCSI disk
[ 40.184193] sd 4:0:0:0: [sde] 625142448 512-byte hardware sectors (320073 MB)
[ 40.187065] sd 4:0:0:0: [sde] Write Protect is off
[ 40.187103] sd 4:0:0:0: [sde] Mode Sense: 03 00 00 00
[ 40.187105] sd 4:0:0:0: [sde] Assuming drive cache: write through
[ 40.189186] sd 4:0:0:0: [sde] 625142448 512-byte hardware sectors (320073 MB)
[ 40.191059] sd 4:0:0:0: [sde] Write Protect is off
[ 40.191097] sd 4:0:0:0: [sde] Mode Sense: 03 00 00 00
[ 40.191099] sd 4:0:0:0: [sde] Assuming drive cache: write through
[ 40.191138] sde:<6>intel8x0_measure_ac97_clock: measured 54811 usecs
[ 40.429398] intel8x0: clocking to 46981
[ 40.919334] input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
[ 40.922844] parport_pc 00:0a: reported by Plug and Play ACPI
[ 40.922929] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 43.511331] Adding 3036244k swap on /dev/sda5. Priority:-1 extents:1 across:3036244k
[ 43.952498] EXT3 FS on dm-0, internal journal
[ 44.020016] sde1
[ 44.020140] sd 4:0:0:0: [sde] Attached SCSI disk
[ 44.025003] sd 3:0:0:0: [sdf] 312581808 512-byte hardware sectors (160042 MB)
[ 44.028710] sd 3:0:0:0: [sdf] Write Protect is off
[ 44.028756] sd 3:0:0:0: [sdf] Mode Sense: 27 00 00 00
[ 44.028759] sd 3:0:0:0: [sdf] Assuming drive cache: write through
[ 44.032707] sd 3:0:0:0: [sdf] 312581808 512-byte hardware sectors (160042 MB)
[ 44.035706] sd 3:0:0:0: [sdf] Write Protect is off
[ 44.035745] sd 3:0:0:0: [sdf] Mode Sense: 27 00 00 00
[ 44.035748] sd 3:0:0:0: [sdf] Assuming drive cache: write through
[ 44.035788] sdf: sdf1 sdf2 sdf3
[ 44.057279] sd 3:0:0:0: [sdf] Attached SCSI disk
[ 44.417152] f71805f: Found F71872F/FG chip at 0x290, revision 33
[ 48.251624] kjournald starting. Commit interval 5 seconds
[ 48.301077] EXT3 FS on dm-4, internal journal
[ 48.301138] EXT3-fs: mounted filesystem with ordered data mode.
[ 48.315828] kjournald starting. Commit interval 5 seconds
[ 48.324360] EXT3 FS on dm-3, internal journal
[ 48.324419] EXT3-fs: mounted filesystem with ordered data mode.
[ 48.351268] kjournald starting. Commit interval 5 seconds
[ 48.361585] EXT3 FS on dm-1, internal journal
[ 48.361644] EXT3-fs: mounted filesystem with ordered data mode.
[ 48.393085] kjournald starting. Commit interval 5 seconds
[ 48.399449] EXT3 FS on dm-2, internal journal
[ 48.399508] EXT3-fs: mounted filesystem with ordered data mode.
[ 48.422368] kjournald starting. Commit interval 5 seconds
[ 48.432338] EXT3 FS on sda1, internal journal
[ 48.432397] EXT3-fs: mounted filesystem with ordered data mode.
[ 48.454943] kjournald starting. Commit interval 5 seconds
[ 48.455094] EXT3 FS on sdc1, internal journal
[ 48.455152] EXT3-fs: mounted filesystem with ordered data mode.
[ 48.470571] kjournald starting. Commit interval 5 seconds
[ 48.475025] EXT3 FS on sdb1, internal journal
[ 48.475083] EXT3-fs: mounted filesystem with ordered data mode.
[ 48.501723] kjournald starting. Commit interval 5 seconds
[ 48.510507] EXT3 FS on sda6, internal journal
[ 48.510567] EXT3-fs: mounted filesystem with ordered data mode.
[ 48.994556] ata1: timeout waiting for ADMA IDLE, stat=0x440
[ 49.147577] ata1: failed to read log page 10h (errno=-2)
[ 49.149046] ata1.00: exception Emask 0x1 SAct 0xff SErr 0x0 action 0x0
[ 49.149086] ata1.00: (CPB resp_flags 0x11: CMD error)
[ 49.149129] ata1.00: cmd 61/06:00:bc:bf:df/00:00:16:00:00/40 tag 0 cdb 0x0 data 3072 out
[ 49.149131] res 51/04:00:16:00:00/04:00:16:00:00/40 Emask 0x1 (device error)
[ 49.149234] ata1.00: cmd 61/04:08:c4:bf:df/00:00:16:00:00/40 tag 1 cdb 0x0 data 2048 out
[ 49.149236] res 51/04:00:16:00:00/04:00:16:00:00/40 Emask 0x1 (device error)
[ 49.149338] ata1.00: cmd 61/02:10:d6:bf:df/00:00:16:00:00/40 tag 2 cdb 0x0 data 1024 out
[ 49.149340] res 51/04:00:16:00:00/04:00:16:00:00/40 Emask 0x1 (device error)
[ 49.149443] ata1.00: cmd 61/04:18:dc:bf:df/00:00:16:00:00/40 tag 3 cdb 0x0 data 2048 out
[ 49.149445] res 51/04:00:16:00:00/04:00:16:00:00/40 Emask 0x1 (device error)
[ 49.149547] ata1.00: cmd 61/02:20:e8:bf:df/00:00:16:00:00/40 tag 4 cdb 0x0 data 1024 out
[ 49.149549] res 51/04:00:16:00:00/04:00:16:00:00/40 Emask 0x1 (device error)
[ 49.149652] ata1.00: cmd 61/02:28:f2:bf:df/00:00:16:00:00/40 tag 5 cdb 0x0 data 1024 out
[ 49.149653] res 51/04:00:16:00:00/04:00:16:00:00/40 Emask 0x1 (device error)
[ 49.149756] ata1.00: cmd 61/04:30:fa:bf:df/00:00:16:00:00/40 tag 6 cdb 0x0 data 2048 out
[ 49.149758] res 51/04:00:16:00:00/04:00:16:00:00/40 Emask 0x1 (device error)
[ 49.149860] ata1.00: cmd 61/02:38:04:c0:df/00:00:16:00:00/40 tag 7 cdb 0x0 data 1024 out
[ 49.149862] res 51/04:00:16:00:00/04:00:16:00:00/40 Emask 0x1 (device error)
[ 49.175045] ata1.00: configured for UDMA/133
[ 49.175095] ata1: EH complete
[ 49.175145] ata1: timeout waiting for ADMA LEGACY clear and IDLE, stat=0x440
[ 49.175237] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[ 49.175285] sd 0:0:0:0: [sda] Write Protect is off
[ 49.175323] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 49.175334] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 79.155040] ata1: EH in ADMA mode, notifier 0x0 notifier_error 0x0 gen_ctl 0x1501000 status 0x400 next cpb count 0x17 next cpb idx 0x0
[ 79.155098] ata1: CPB 0: ctl_flags 0x1f, resp_flags 0x2
[ 79.155136] ata1: CPB 1: ctl_flags 0x1f, resp_flags 0x0
[ 79.155174] ata1: CPB 2: ctl_flags 0x1f, resp_flags 0x0
[ 79.155212] ata1: CPB 3: ctl_flags 0x1f, resp_flags 0x0
[ 79.155250] ata1: CPB 4: ctl_flags 0x1f, resp_flags 0x0
[ 79.155288] ata1: CPB 5: ctl_flags 0x1f, resp_flags 0x0
[ 79.155326] ata1: CPB 6: ctl_flags 0x1f, resp_flags 0x0
[ 79.155364] ata1: CPB 7: ctl_flags 0x1f, resp_flags 0x0
[ 79.155402] ata1: CPB 8: ctl_flags 0x1f, resp_flags 0x0
[ 79.155440] ata1: CPB 9: ctl_flags 0x1f, resp_flags 0x0
[ 79.155478] ata1: CPB 10: ctl_flags 0x1f, resp_flags 0x0
[ 79.155517] ata1: CPB 11: ctl_flags 0x1f, resp_flags 0x0
[ 79.155555] ata1: CPB 12: ctl_flags 0x1f, resp_flags 0x0
[ 79.155593] ata1: CPB 13: ctl_flags 0x1f, resp_flags 0x0
[ 79.155631] ata1: CPB 14: ctl_flags 0x1f, resp_flags 0x0
[ 79.155669] ata1: CPB 15: ctl_flags 0x1f, resp_flags 0x0
[ 79.155708] ata1: CPB 16: ctl_flags 0x1f, resp_flags 0x0
[ 79.155746] ata1: CPB 17: ctl_flags 0x1f, resp_flags 0x0
[ 79.155784] ata1: CPB 18: ctl_flags 0x1f, resp_flags 0x0
[ 79.155828] ata1: timeout waiting for ADMA IDLE, stat=0x400
[ 79.155873] ata1: timeout waiting for ADMA LEGACY, stat=0x400
[ 79.155917] ata1.00: exception Emask 0x0 SAct 0x7ffff SErr 0x0 action 0x2 frozen
[ 79.155971] ata1.00: cmd 61/02:00:02:c1:df/00:00:16:00:00/40 tag 0 cdb 0x0 data 1024 out
[ 79.155973] res 40/00:00:16:00:00/04:00:16:00:00/40 Emask 0x4 (timeout)
[ 79.156075] ata1.00: cmd 61/04:08:fa:bf:df/00:00:16:00:00/40 tag 1 cdb 0x0 data 2048 out
[ 79.156077] res 40/00:00:16:00:00/04:00:16:00:00/40 Emask 0x4 (timeout)
[ 79.156179] ata1.00: cmd 61/02:10:f2:bf:df/00:00:16:00:00/40 tag 2 cdb 0x0 data 1024 out
[ 79.156180] res 40/00:00:16:00:00/04:00:16:00:00/40 Emask 0x4 (timeout)
[ 79.156282] ata1.00: cmd 61/02:18:e8:bf:df/00:00:16:00:00/40 tag 3 cdb 0x0 data 1024 out
[ 79.156284] res 40/00:00:16:00:00/04:00:16:00:00/40 Emask 0x4 (timeout)
[ 79.156386] ata1.00: cmd 61/04:20:dc:bf:df/00:00:16:00:00/40 tag 4 cdb 0x0 data 2048 out
[ 79.156388] res 40/00:00:16:00:00/04:00:16:00:00/40 Emask 0x4 (timeout)
[ 79.156490] ata1.00: cmd 61/02:28:d6:bf:df/00:00:16:00:00/40 tag 5 cdb 0x0 data 1024 out
[ 79.156492] res 40/00:00:16:00:00/04:00:16:00:00/40 Emask 0x4 (timeout)
[ 79.156594] ata1.00: cmd 61/04:30:c4:bf:df/00:00:16:00:00/40 tag 6 cdb 0x0 data 2048 out
[ 79.156596] res 40/00:00:16:00:00/04:00:16:00:00/40 Emask 0x4 (timeout)
[ 79.156698] ata1.00: cmd 61/06:38:bc:bf:df/00:00:16:00:00/40 tag 7 cdb 0x0 data 3072 out
[ 79.156699] res 40/00:00:16:00:00/04:00:16:00:00/40 Emask 0x4 (timeout)
[ 79.156801] ata1.00: cmd 61/04:40:08:c0:df/00:00:16:00:00/40 tag 8 cdb 0x0 data 2048 out
[ 79.156803] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 79.156905] ata1.00: cmd 61/04:48:ca:c0:df/00:00:16:00:00/40 tag 9 cdb 0x0 data 2048 out
[ 79.156907] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 79.157009] ata1.00: cmd 61/06:50:d0:c0:df/00:00:16:00:00/40 tag 10 cdb 0x0 data 3072 out
[ 79.157011] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 79.157113] ata1.00: cmd 61/02:58:d8:c0:df/00:00:16:00:00/40 tag 11 cdb 0x0 data 1024 out
[ 79.157114] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 79.157216] ata1.00: cmd 61/02:60:e0:c0:df/00:00:16:00:00/40 tag 12 cdb 0x0 data 1024 out
[ 79.157218] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 79.157320] ata1.00: cmd 61/02:68:f0:c0:df/00:00:16:00:00/40 tag 13 cdb 0x0 data 1024 out
[ 79.157322] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 79.157424] ata1.00: cmd 61/02:70:f8:c0:df/00:00:16:00:00/40 tag 14 cdb 0x0 data 1024 out
[ 79.157426] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 79.157528] ata1.00: cmd 61/04:78:fc:c0:df/00:00:16:00:00/40 tag 15 cdb 0x0 data 2048 out
[ 79.157529] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 79.157631] ata1.00: cmd 61/02:80:06:c1:df/00:00:16:00:00/40 tag 16 cdb 0x0 data 1024 out
[ 79.157633] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 79.157735] ata1.00: cmd 61/06:88:0a:c1:df/00:00:16:00:00/40 tag 17 cdb 0x0 data 3072 out
[ 79.157737] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 79.157839] ata1.00: cmd 61/04:90:18:c1:df/00:00:16:00:00/40 tag 18 cdb 0x0 data 2048 out
[ 79.157841] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 79.466629] ata1: soft resetting port
[ 79.622437] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 79.647445] ata1.00: configured for UDMA/133
[ 79.647494] ata1: EH complete
[ 79.647538] ata1: timeout waiting for ADMA LEGACY clear and IDLE, stat=0x400
[ 79.647602] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[ 79.647648] sd 0:0:0:0: [sda] Write Protect is off
[ 79.647686] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 79.647697] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 109.607481] ata1: EH in ADMA mode, notifier 0x0 notifier_error 0x0 gen_ctl 0x1501000 status 0x400 next cpb count 0x12 next cpb idx 0x0
[ 109.607538] ata1: CPB 0: ctl_flags 0x1f, resp_flags 0x2
[ 109.607576] ata1: CPB 1: ctl_flags 0x1f, resp_flags 0x0
[ 109.607614] ata1: CPB 2: ctl_flags 0x1f, resp_flags 0x0
[ 109.607652] ata1: CPB 3: ctl_flags 0x1f, resp_flags 0x0
[ 109.607690] ata1: CPB 4: ctl_flags 0x1f, resp_flags 0x0
[ 109.607728] ata1: CPB 5: ctl_flags 0x1f, resp_flags 0x0
[ 109.607766] ata1: CPB 6: ctl_flags 0x1f, resp_flags 0x0
[ 109.607804] ata1: CPB 7: ctl_flags 0x1f, resp_flags 0x0
[ 109.607842] ata1: CPB 8: ctl_flags 0x1f, resp_flags 0x0
[ 109.607880] ata1: CPB 9: ctl_flags 0x1f, resp_flags 0x0
[ 109.607919] ata1: CPB 10: ctl_flags 0x1f, resp_flags 0x0
[ 109.607957] ata1: CPB 11: ctl_flags 0x1f, resp_flags 0x0
[ 109.607995] ata1: CPB 12: ctl_flags 0x1f, resp_flags 0x0
[ 109.608033] ata1: CPB 13: ctl_flags 0x1f, resp_flags 0x0
[ 109.608071] ata1: CPB 14: ctl_flags 0x1f, resp_flags 0x0
[ 109.608110] ata1: CPB 15: ctl_flags 0x1f, resp_flags 0x0
[ 109.608148] ata1: CPB 16: ctl_flags 0x1f, resp_flags 0x0
[ 109.608186] ata1: CPB 17: ctl_flags 0x1f, resp_flags 0x0
[ 109.608224] ata1: CPB 18: ctl_flags 0x1f, resp_flags 0x0
[ 109.608268] ata1: timeout waiting for ADMA IDLE, stat=0x400
[ 109.608313] ata1: timeout waiting for ADMA LEGACY, stat=0x400
[ 109.608356] ata1.00: exception Emask 0x0 SAct 0x7ffff SErr 0x0 action 0x2 frozen
[ 109.608410] ata1.00: cmd 61/04:00:18:c1:df/00:00:16:00:00/40 tag 0 cdb 0x0 data 2048 out
[ 109.608412] res 40/00:00:16:00:00/04:00:16:00:00/40 Emask 0x4 (timeout)
[ 109.609937] ata1.00: cmd 61/06:08:0a:c1:df/00:00:16:00:00/40 tag 1 cdb 0x0 data 3072 out
[ 109.609938] res 40/00:00:16:00:00/04:00:16:00:00/40 Emask 0x4 (timeout)
[ 109.610041] ata1.00: cmd 61/02:10:06:c1:df/00:00:16:00:00/40 tag 2 cdb 0x0 data 1024 out
[ 109.610042] res 40/00:00:16:00:00/04:00:16:00:00/40 Emask 0x4 (timeout)
[ 109.610145] ata1.00: cmd 61/04:18:fc:c0:df/00:00:16:00:00/40 tag 3 cdb 0x0 data 2048 out
[ 109.610146] res 40/00:00:16:00:00/04:00:16:00:00/40 Emask 0x4 (timeout)
[ 109.610249] ata1.00: cmd 61/02:20:f8:c0:df/00:00:16:00:00/40 tag 4 cdb 0x0 data 1024 out
[ 109.610250] res 40/00:00:16:00:00/04:00:16:00:00/40 Emask 0x4 (timeout)
[ 109.610353] ata1.00: cmd 61/02:28:f0:c0:df/00:00:16:00:00/40 tag 5 cdb 0x0 data 1024 out
[ 109.610354] res 40/00:00:16:00:00/04:00:16:00:00/40 Emask 0x4 (timeout)
[ 109.610456] ata1.00: cmd 61/02:30:e0:c0:df/00:00:16:00:00/40 tag 6 cdb 0x0 data 1024 out
[ 109.610458] res 40/00:00:16:00:00/04:00:16:00:00/40 Emask 0x4 (timeout)
[ 109.610560] ata1.00: cmd 61/02:38:d8:c0:df/00:00:16:00:00/40 tag 7 cdb 0x0 data 1024 out
[ 109.610562] res 40/00:00:16:00:00/04:00:16:00:00/40 Emask 0x4 (timeout)
[ 109.610664] ata1.00: cmd 61/06:40:d0:c0:df/00:00:16:00:00/40 tag 8 cdb 0x0 data 3072 out
[ 109.610666] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 109.610768] ata1.00: cmd 61/04:48:ca:c0:df/00:00:16:00:00/40 tag 9 cdb 0x0 data 2048 out
[ 109.610769] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 109.610871] ata1.00: cmd 61/04:50:08:c0:df/00:00:16:00:00/40 tag 10 cdb 0x0 data 2048 out
[ 109.610873] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 109.610975] ata1.00: cmd 61/06:58:bc:bf:df/00:00:16:00:00/40 tag 11 cdb 0x0 data 3072 out
[ 109.610977] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 109.611079] ata1.00: cmd 61/04:60:c4:bf:df/00:00:16:00:00/40 tag 12 cdb 0x0 data 2048 out
[ 109.611081] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 109.611183] ata1.00: cmd 61/02:68:d6:bf:df/00:00:16:00:00/40 tag 13 cdb 0x0 data 1024 out
[ 109.611185] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 109.611287] ata1.00: cmd 61/04:70:dc:bf:df/00:00:16:00:00/40 tag 14 cdb 0x0 data 2048 out
[ 109.611288] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 109.611391] ata1.00: cmd 61/02:78:e8:bf:df/00:00:16:00:00/40 tag 15 cdb 0x0 data 1024 out
[ 109.611392] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 109.611497] ata1.00: cmd 61/02:80:f2:bf:df/00:00:16:00:00/40 tag 16 cdb 0x0 data 1024 out
[ 109.611498] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 109.611601] ata1.00: cmd 61/04:88:fa:bf:df/00:00:16:00:00/40 tag 17 cdb 0x0 data 2048 out
[ 109.611602] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 109.611704] ata1.00: cmd 61/02:90:02:c1:df/00:00:16:00:00/40 tag 18 cdb 0x0 data 1024 out
[ 109.611706] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 109.923055] ata1: soft resetting port
[ 110.078863] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 110.104389] ata1.00: configured for UDMA/133
[ 110.104437] ata1: EH complete
[ 110.104480] ata1: timeout waiting for ADMA LEGACY clear and IDLE, stat=0x400
[ 110.104543] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[ 110.104588] sd 0:0:0:0: [sda] Write Protect is off
[ 110.104625] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 110.104636] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 140.063908] ata1: EH in ADMA mode, notifier 0x0 notifier_error 0x0 gen_ctl 0x1501000 status 0x400 next cpb count 0x12 next cpb idx 0x0
[ 140.063965] ata1: CPB 0: ctl_flags 0x1f, resp_flags 0x2
[ 140.064003] ata1: CPB 1: ctl_flags 0x1f, resp_flags 0x0
[ 140.064041] ata1: CPB 2: ctl_flags 0x1f, resp_flags 0x0
[ 140.064079] ata1: CPB 3: ctl_flags 0x1f, resp_flags 0x0
[ 140.064117] ata1: CPB 4: ctl_flags 0x1f, resp_flags 0x0
[ 140.064156] ata1: CPB 5: ctl_flags 0x1f, resp_flags 0x0
[ 140.064194] ata1: CPB 6: ctl_flags 0x1f, resp_flags 0x0
[ 140.064232] ata1: CPB 7: ctl_flags 0x1f, resp_flags 0x0
[ 140.064270] ata1: CPB 8: ctl_flags 0x1f, resp_flags 0x0
[ 140.064308] ata1: CPB 9: ctl_flags 0x1f, resp_flags 0x0
[ 140.064346] ata1: CPB 10: ctl_flags 0x1f, resp_flags 0x0
[ 140.064384] ata1: CPB 11: ctl_flags 0x1f, resp_flags 0x0
[ 140.064422] ata1: CPB 12: ctl_flags 0x1f, resp_flags 0x0
[ 140.064460] ata1: CPB 13: ctl_flags 0x1f, resp_flags 0x0
[ 140.064498] ata1: CPB 14: ctl_flags 0x1f, resp_flags 0x0
[ 140.064537] ata1: CPB 15: ctl_flags 0x1f, resp_flags 0x0
[ 140.064575] ata1: CPB 16: ctl_flags 0x1f, resp_flags 0x0
[ 140.064613] ata1: CPB 17: ctl_flags 0x1f, resp_flags 0x0
[ 140.064651] ata1: CPB 18: ctl_flags 0x1f, resp_flags 0x0
[ 140.064695] ata1: timeout waiting for ADMA IDLE, stat=0x400
[ 140.064740] ata1: timeout waiting for ADMA LEGACY, stat=0x400
[ 140.064782] ata1.00: NCQ disabled due to excessive errors
[ 140.064821] ata1.00: exception Emask 0x0 SAct 0x7ffff SErr 0x0 action 0x2 frozen
[ 140.064875] ata1.00: cmd 61/02:00:02:c1:df/00:00:16:00:00/40 tag 0 cdb 0x0 data 1024 out
[ 140.064877] res 40/00:00:16:00:00/04:00:16:00:00/40 Emask 0x4 (timeout)
[ 140.064979] ata1.00: cmd 61/04:08:fa:bf:df/00:00:16:00:00/40 tag 1 cdb 0x0 data 2048 out
[ 140.064981] res 40/00:00:16:00:00/04:00:16:00:00/40 Emask 0x4 (timeout)
[ 140.065083] ata1.00: cmd 61/02:10:f2:bf:df/00:00:16:00:00/40 tag 2 cdb 0x0 data 1024 out
[ 140.065085] res 40/00:00:16:00:00/04:00:16:00:00/40 Emask 0x4 (timeout)
[ 140.065187] ata1.00: cmd 61/02:18:e8:bf:df/00:00:16:00:00/40 tag 3 cdb 0x0 data 1024 out
[ 140.065188] res 40/00:00:16:00:00/04:00:16:00:00/40 Emask 0x4 (timeout)
[ 140.065290] ata1.00: cmd 61/04:20:dc:bf:df/00:00:16:00:00/40 tag 4 cdb 0x0 data 2048 out
[ 140.065292] res 40/00:00:16:00:00/04:00:16:00:00/40 Emask 0x4 (timeout)
[ 140.065394] ata1.00: cmd 61/02:28:d6:bf:df/00:00:16:00:00/40 tag 5 cdb 0x0 data 1024 out
[ 140.065396] res 40/00:00:16:00:00/04:00:16:00:00/40 Emask 0x4 (timeout)
[ 140.065498] ata1.00: cmd 61/04:30:c4:bf:df/00:00:16:00:00/40 tag 6 cdb 0x0 data 2048 out
[ 140.065500] res 40/00:00:16:00:00/04:00:16:00:00/40 Emask 0x4 (timeout)
[ 140.065602] ata1.00: cmd 61/06:38:bc:bf:df/00:00:16:00:00/40 tag 7 cdb 0x0 data 3072 out
[ 140.065603] res 40/00:00:16:00:00/04:00:16:00:00/40 Emask 0x4 (timeout)
[ 140.065705] ata1.00: cmd 61/04:40:08:c0:df/00:00:16:00:00/40 tag 8 cdb 0x0 data 2048 out
[ 140.065707] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 140.065809] ata1.00: cmd 61/04:48:ca:c0:df/00:00:16:00:00/40 tag 9 cdb 0x0 data 2048 out
[ 140.065810] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 140.065912] ata1.00: cmd 61/06:50:d0:c0:df/00:00:16:00:00/40 tag 10 cdb 0x0 data 3072 out
[ 140.065914] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 140.066016] ata1.00: cmd 61/02:58:d8:c0:df/00:00:16:00:00/40 tag 11 cdb 0x0 data 1024 out
[ 140.066018] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 140.066120] ata1.00: cmd 61/02:60:e0:c0:df/00:00:16:00:00/40 tag 12 cdb 0x0 data 1024 out
[ 140.066121] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 140.066224] ata1.00: cmd 61/02:68:f0:c0:df/00:00:16:00:00/40 tag 13 cdb 0x0 data 1024 out
[ 140.066225] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 140.066327] ata1.00: cmd 61/02:70:f8:c0:df/00:00:16:00:00/40 tag 14 cdb 0x0 data 1024 out
[ 140.066329] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 140.066431] ata1.00: cmd 61/04:78:fc:c0:df/00:00:16:00:00/40 tag 15 cdb 0x0 data 2048 out
[ 140.066433] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 140.066535] ata1.00: cmd 61/02:80:06:c1:df/00:00:16:00:00/40 tag 16 cdb 0x0 data 1024 out
[ 140.066537] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 140.066639] ata1.00: cmd 61/06:88:0a:c1:df/00:00:16:00:00/40 tag 17 cdb 0x0 data 3072 out
[ 140.066641] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 140.066743] ata1.00: cmd 61/04:90:18:c1:df/00:00:16:00:00/40 tag 18 cdb 0x0 data 2048 out
[ 140.066744] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 140.379482] ata1: soft resetting port
[ 140.535289] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 140.560308] ata1.00: configured for UDMA/133
[ 140.560356] ata1: EH complete
[ 140.560400] ata1: timeout waiting for ADMA LEGACY clear and IDLE, stat=0x400
[ 170.520332] ata1: EH in ADMA mode, notifier 0x0 notifier_error 0x0 gen_ctl 0x1501000 status 0x400 next cpb count 0x0 next cpb idx 0x0
[ 170.520389] ata1: CPB 0: ctl_flags 0xd, resp_flags 0x0
[ 170.520433] ata1: timeout waiting for ADMA IDLE, stat=0x400
[ 170.520477] ata1: timeout waiting for ADMA LEGACY, stat=0x400
[ 170.520521] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 170.520565] ata1.00: cmd 35/00:04:18:c1:df/00:00:16:00:00/e0 tag 0 cdb 0x0 data 2048 out
[ 170.520567] res 40/00:00:16:00:00/04:00:16:00:00/40 Emask 0x4 (timeout)
[ 170.831913] ata1: soft resetting port
[ 170.987721] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 171.012723] ata1.00: configured for UDMA/133
[ 171.012762] ata1: EH complete
[ 171.162056] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[ 171.166591] sd 0:0:0:0: [sda] Write Protect is off
[ 171.166629] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 171.178390] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 171.195572] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[ 171.204351] sd 0:0:0:0: [sda] Write Protect is off
[ 171.204389] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 171.214556] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
next prev parent reply other threads:[~2007-08-15 21:39 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-08-12 14:14 regression problem with Maxtor disk Lieven Marchand
2007-08-14 9:50 ` Tejun Heo
2007-08-14 23:14 ` Robert Hancock
2007-08-15 7:34 ` Lieven Marchand
2007-08-15 7:53 ` Tejun Heo
2007-08-15 21:22 ` Lieven Marchand [this message]
2007-08-15 23:31 ` Robert Hancock
-- strict thread matches above, loose matches on Subject: below --
2007-08-12 23:36 babl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87wsvw8pda.fsf@wyrd.be \
--to=mal@wyrd.be \
--cc=hancockr@shaw.ca \
--cc=htejun@gmail.com \
--cc=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.