* [PATCH v2] mmc: host: sdhci: Fix parameter of sdhci_do_start_signal_voltage_switch()
@ 2013-02-14 12:35 Fabio Estevam
2013-02-14 12:56 ` Johan Rudholm
0 siblings, 1 reply; 3+ messages in thread
From: Fabio Estevam @ 2013-02-14 12:35 UTC (permalink / raw)
To: cjb; +Cc: kliu5, linux-mmc, ulf.hansson, Fabio Estevam
Commit 3714f4315354 (mmc: sdhci: update signal voltage switch code) changed the
type of the second parameter of sdhci_do_start_signal_voltage_switch(), from
"struct mmc_ios *ios" to "int signal_voltage" which causes the following build
warning:
drivers/mmc/host/sdhci.c:2044:2: warning: initialization from incompatible pointer type [enabled by default]
drivers/mmc/host/sdhci.c:2044:2: warning: (near initialization for 'sdhci_ops.start_signal_voltage_switch') [enabled by default]
Use the previous type so that it matches the start_signal_voltage_switch()
definition from host.h.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
Changes since v1:
- Fix it inside sdhci to avoid breakage on other mmc controllers
drivers/mmc/host/sdhci.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 735526b..51bbba4 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1675,7 +1675,7 @@ static void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable)
}
static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
- int signal_voltage)
+ struct mmc_ios *ios)
{
u16 ctrl;
int ret;
@@ -1689,7 +1689,7 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
- switch (signal_voltage) {
+ switch (ios->signal_voltage) {
case MMC_SIGNAL_VOLTAGE_330:
/* Set 1.8V Signal Enable in the Host Control2 register to 0 */
ctrl &= ~SDHCI_CTRL_VDD_180;
@@ -1762,7 +1762,7 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
}
static int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
- int signal_voltage)
+ struct mmc_ios *ios)
{
struct sdhci_host *host = mmc_priv(mmc);
int err;
@@ -1770,7 +1770,7 @@ static int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
if (host->version < SDHCI_SPEC_300)
return 0;
sdhci_runtime_pm_get(host);
- err = sdhci_do_start_signal_voltage_switch(host, signal_voltage);
+ err = sdhci_do_start_signal_voltage_switch(host, ios);
sdhci_runtime_pm_put(host);
return err;
}
--
1.7.9.5
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH v2] mmc: host: sdhci: Fix parameter of sdhci_do_start_signal_voltage_switch()
2013-02-14 12:35 [PATCH v2] mmc: host: sdhci: Fix parameter of sdhci_do_start_signal_voltage_switch() Fabio Estevam
@ 2013-02-14 12:56 ` Johan Rudholm
2013-02-14 21:04 ` Chris Ball
0 siblings, 1 reply; 3+ messages in thread
From: Johan Rudholm @ 2013-02-14 12:56 UTC (permalink / raw)
To: Fabio Estevam; +Cc: cjb, kliu5, linux-mmc, ulf.hansson
Hi,
2013/2/14 Fabio Estevam <fabio.estevam@freescale.com>:
> Commit 3714f4315354 (mmc: sdhci: update signal voltage switch code) changed the
> type of the second parameter of sdhci_do_start_signal_voltage_switch(), from
> "struct mmc_ios *ios" to "int signal_voltage" which causes the following build
> warning:
>
> drivers/mmc/host/sdhci.c:2044:2: warning: initialization from incompatible pointer type [enabled by default]
> drivers/mmc/host/sdhci.c:2044:2: warning: (near initialization for 'sdhci_ops.start_signal_voltage_switch') [enabled by default]
>
> Use the previous type so that it matches the start_signal_voltage_switch()
> definition from host.h.
>
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Johan Rudholm <johan.rudholm@stericsson.com>
Kind regards, Johan
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH v2] mmc: host: sdhci: Fix parameter of sdhci_do_start_signal_voltage_switch()
2013-02-14 12:56 ` Johan Rudholm
@ 2013-02-14 21:04 ` Chris Ball
0 siblings, 0 replies; 3+ messages in thread
From: Chris Ball @ 2013-02-14 21:04 UTC (permalink / raw)
To: Johan Rudholm; +Cc: Fabio Estevam, kliu5, linux-mmc, ulf.hansson, arnd.bergmann
Hi,
On Thu, Feb 14 2013, Johan Rudholm wrote:
> 2013/2/14 Fabio Estevam <fabio.estevam@freescale.com>:
>> Commit 3714f4315354 (mmc: sdhci: update signal voltage switch code)
>> changed the
>> type of the second parameter of sdhci_do_start_signal_voltage_switch(), from
>> "struct mmc_ios *ios" to "int signal_voltage" which causes the following build
>> warning:
>>
>> drivers/mmc/host/sdhci.c:2044:2: warning: initialization from
>> incompatible pointer type [enabled by default]
>> drivers/mmc/host/sdhci.c:2044:2: warning: (near initialization for
>> sdhci_ops.start_signal_voltage_switch') [enabled by default]
>>
>> Use the previous type so that it matches the start_signal_voltage_switch()
>> definition from host.h.
>>
>> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
>
> Reviewed-by: Johan Rudholm <johan.rudholm@stericsson.com>
Pushed to mmc-next for 3.9. Thanks!
- Chris.
--
Chris Ball <cjb@laptop.org> <http://printf.net/>
One Laptop Per Child
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2013-02-14 21:04 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-02-14 12:35 [PATCH v2] mmc: host: sdhci: Fix parameter of sdhci_do_start_signal_voltage_switch() Fabio Estevam
2013-02-14 12:56 ` Johan Rudholm
2013-02-14 21:04 ` Chris Ball
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.