From: Kevin Hilman <khilman@deeprootsystems.com>
To: "Mark A. Greer" <mgreer@animalcreek.com>
Cc: linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-crypto@vger.kernel.org, herbert@gondor.apana.org.au,
davem@davemloft.net, dmitry.kasatkin@intel.com,
rmk+kernel@arm.linux.org.uk, paul@pwsan.com
Subject: Re: [PATCH v3 5/7] crypto: omap-sham: Convert to use pm_runtime API
Date: Tue, 13 Nov 2012 17:12:26 -0800 [thread overview]
Message-ID: <87bof1f0n9.fsf@deeprootsystems.com> (raw)
In-Reply-To: <1352257033-32495-6-git-send-email-mgreer@animalcreek.com> (Mark A. Greer's message of "Tue, 6 Nov 2012 19:57:11 -0700")
Hi Mark,
"Mark A. Greer" <mgreer@animalcreek.com> writes:
> From: "Mark A. Greer" <mgreer@animalcreek.com>
>
> Convert the omap-sham crypto driver to use the
> pm_runtime API instead of the clk API.
>
> CC: Kevin Hilman <khilman@deeprootsystems.com>
> CC: Paul Walmsley <paul@pwsan.com>
> CC: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>
Acked-by: Kevin Hilman <khilman@ti.com>
This looks much better and is more obviously a straight forward clock
API --> runtime PM conversion.
Thanks,
Kevin
> ---
> drivers/crypto/omap-sham.c | 28 +++++++++++-----------------
> 1 file changed, 11 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/crypto/omap-sham.c b/drivers/crypto/omap-sham.c
> index a3fd6fc..85d43b2 100644
> --- a/drivers/crypto/omap-sham.c
> +++ b/drivers/crypto/omap-sham.c
> @@ -22,12 +22,12 @@
> #include <linux/errno.h>
> #include <linux/interrupt.h>
> #include <linux/kernel.h>
> -#include <linux/clk.h>
> #include <linux/irq.h>
> #include <linux/io.h>
> #include <linux/platform_device.h>
> #include <linux/scatterlist.h>
> #include <linux/dma-mapping.h>
> +#include <linux/pm_runtime.h>
> #include <linux/delay.h>
> #include <linux/crypto.h>
> #include <linux/cryptohash.h>
> @@ -141,7 +141,6 @@ struct omap_sham_dev {
> struct device *dev;
> void __iomem *io_base;
> int irq;
> - struct clk *iclk;
> spinlock_t lock;
> int err;
> int dma;
> @@ -238,7 +237,7 @@ static void omap_sham_copy_ready_hash(struct ahash_request *req)
>
> static int omap_sham_hw_init(struct omap_sham_dev *dd)
> {
> - clk_enable(dd->iclk);
> + pm_runtime_get_sync(dd->dev);
>
> if (!test_bit(FLAGS_INIT, &dd->flags)) {
> omap_sham_write_mask(dd, SHA_REG_MASK,
> @@ -653,7 +652,8 @@ static void omap_sham_finish_req(struct ahash_request *req, int err)
> /* atomic operation is not needed here */
> dd->flags &= ~(BIT(FLAGS_BUSY) | BIT(FLAGS_FINAL) | BIT(FLAGS_CPU) |
> BIT(FLAGS_DMA_READY) | BIT(FLAGS_OUTPUT_READY));
> - clk_disable(dd->iclk);
> +
> + pm_runtime_put_sync(dd->dev);
>
> if (req->base.complete)
> req->base.complete(&req->base, err);
> @@ -1198,14 +1198,6 @@ static int __devinit omap_sham_probe(struct platform_device *pdev)
> if (err)
> goto dma_err;
>
> - /* Initializing the clock */
> - dd->iclk = clk_get(dev, "ick");
> - if (IS_ERR(dd->iclk)) {
> - dev_err(dev, "clock intialization failed.\n");
> - err = PTR_ERR(dd->iclk);
> - goto clk_err;
> - }
> -
> dd->io_base = ioremap(dd->phys_base, SZ_4K);
> if (!dd->io_base) {
> dev_err(dev, "can't ioremap\n");
> @@ -1213,11 +1205,14 @@ static int __devinit omap_sham_probe(struct platform_device *pdev)
> goto io_err;
> }
>
> - clk_enable(dd->iclk);
> + pm_runtime_enable(dev);
> + pm_runtime_get_sync(dev);
> +
> dev_info(dev, "hw accel on OMAP rev %u.%u\n",
> (omap_sham_read(dd, SHA_REG_REV) & SHA_REG_REV_MAJOR) >> 4,
> omap_sham_read(dd, SHA_REG_REV) & SHA_REG_REV_MINOR);
> - clk_disable(dd->iclk);
> +
> + pm_runtime_put_sync(&pdev->dev);
>
> spin_lock(&sham.lock);
> list_add_tail(&dd->list, &sham.dev_list);
> @@ -1235,9 +1230,8 @@ err_algs:
> for (j = 0; j < i; j++)
> crypto_unregister_ahash(&algs[j]);
> iounmap(dd->io_base);
> + pm_runtime_disable(dev);
> io_err:
> - clk_put(dd->iclk);
> -clk_err:
> omap_sham_dma_cleanup(dd);
> dma_err:
> if (dd->irq >= 0)
> @@ -1266,7 +1260,7 @@ static int __devexit omap_sham_remove(struct platform_device *pdev)
> crypto_unregister_ahash(&algs[i]);
> tasklet_kill(&dd->done_task);
> iounmap(dd->io_base);
> - clk_put(dd->iclk);
> + pm_runtime_disable(&pdev->dev);
> omap_sham_dma_cleanup(dd);
> if (dd->irq >= 0)
> free_irq(dd->irq, dd);
WARNING: multiple messages have this Message-ID (diff)
From: khilman@deeprootsystems.com (Kevin Hilman)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 5/7] crypto: omap-sham: Convert to use pm_runtime API
Date: Tue, 13 Nov 2012 17:12:26 -0800 [thread overview]
Message-ID: <87bof1f0n9.fsf@deeprootsystems.com> (raw)
In-Reply-To: <1352257033-32495-6-git-send-email-mgreer@animalcreek.com> (Mark A. Greer's message of "Tue, 6 Nov 2012 19:57:11 -0700")
Hi Mark,
"Mark A. Greer" <mgreer@animalcreek.com> writes:
> From: "Mark A. Greer" <mgreer@animalcreek.com>
>
> Convert the omap-sham crypto driver to use the
> pm_runtime API instead of the clk API.
>
> CC: Kevin Hilman <khilman@deeprootsystems.com>
> CC: Paul Walmsley <paul@pwsan.com>
> CC: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>
Acked-by: Kevin Hilman <khilman@ti.com>
This looks much better and is more obviously a straight forward clock
API --> runtime PM conversion.
Thanks,
Kevin
> ---
> drivers/crypto/omap-sham.c | 28 +++++++++++-----------------
> 1 file changed, 11 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/crypto/omap-sham.c b/drivers/crypto/omap-sham.c
> index a3fd6fc..85d43b2 100644
> --- a/drivers/crypto/omap-sham.c
> +++ b/drivers/crypto/omap-sham.c
> @@ -22,12 +22,12 @@
> #include <linux/errno.h>
> #include <linux/interrupt.h>
> #include <linux/kernel.h>
> -#include <linux/clk.h>
> #include <linux/irq.h>
> #include <linux/io.h>
> #include <linux/platform_device.h>
> #include <linux/scatterlist.h>
> #include <linux/dma-mapping.h>
> +#include <linux/pm_runtime.h>
> #include <linux/delay.h>
> #include <linux/crypto.h>
> #include <linux/cryptohash.h>
> @@ -141,7 +141,6 @@ struct omap_sham_dev {
> struct device *dev;
> void __iomem *io_base;
> int irq;
> - struct clk *iclk;
> spinlock_t lock;
> int err;
> int dma;
> @@ -238,7 +237,7 @@ static void omap_sham_copy_ready_hash(struct ahash_request *req)
>
> static int omap_sham_hw_init(struct omap_sham_dev *dd)
> {
> - clk_enable(dd->iclk);
> + pm_runtime_get_sync(dd->dev);
>
> if (!test_bit(FLAGS_INIT, &dd->flags)) {
> omap_sham_write_mask(dd, SHA_REG_MASK,
> @@ -653,7 +652,8 @@ static void omap_sham_finish_req(struct ahash_request *req, int err)
> /* atomic operation is not needed here */
> dd->flags &= ~(BIT(FLAGS_BUSY) | BIT(FLAGS_FINAL) | BIT(FLAGS_CPU) |
> BIT(FLAGS_DMA_READY) | BIT(FLAGS_OUTPUT_READY));
> - clk_disable(dd->iclk);
> +
> + pm_runtime_put_sync(dd->dev);
>
> if (req->base.complete)
> req->base.complete(&req->base, err);
> @@ -1198,14 +1198,6 @@ static int __devinit omap_sham_probe(struct platform_device *pdev)
> if (err)
> goto dma_err;
>
> - /* Initializing the clock */
> - dd->iclk = clk_get(dev, "ick");
> - if (IS_ERR(dd->iclk)) {
> - dev_err(dev, "clock intialization failed.\n");
> - err = PTR_ERR(dd->iclk);
> - goto clk_err;
> - }
> -
> dd->io_base = ioremap(dd->phys_base, SZ_4K);
> if (!dd->io_base) {
> dev_err(dev, "can't ioremap\n");
> @@ -1213,11 +1205,14 @@ static int __devinit omap_sham_probe(struct platform_device *pdev)
> goto io_err;
> }
>
> - clk_enable(dd->iclk);
> + pm_runtime_enable(dev);
> + pm_runtime_get_sync(dev);
> +
> dev_info(dev, "hw accel on OMAP rev %u.%u\n",
> (omap_sham_read(dd, SHA_REG_REV) & SHA_REG_REV_MAJOR) >> 4,
> omap_sham_read(dd, SHA_REG_REV) & SHA_REG_REV_MINOR);
> - clk_disable(dd->iclk);
> +
> + pm_runtime_put_sync(&pdev->dev);
>
> spin_lock(&sham.lock);
> list_add_tail(&dd->list, &sham.dev_list);
> @@ -1235,9 +1230,8 @@ err_algs:
> for (j = 0; j < i; j++)
> crypto_unregister_ahash(&algs[j]);
> iounmap(dd->io_base);
> + pm_runtime_disable(dev);
> io_err:
> - clk_put(dd->iclk);
> -clk_err:
> omap_sham_dma_cleanup(dd);
> dma_err:
> if (dd->irq >= 0)
> @@ -1266,7 +1260,7 @@ static int __devexit omap_sham_remove(struct platform_device *pdev)
> crypto_unregister_ahash(&algs[i]);
> tasklet_kill(&dd->done_task);
> iounmap(dd->io_base);
> - clk_put(dd->iclk);
> + pm_runtime_disable(&pdev->dev);
> omap_sham_dma_cleanup(dd);
> if (dd->irq >= 0)
> free_irq(dd->irq, dd);
next prev parent reply other threads:[~2012-11-14 1:12 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-07 2:57 [PATCH v3 0/7] crypto: omap-sham updates Mark A. Greer
2012-11-07 2:57 ` Mark A. Greer
2012-11-07 2:57 ` [PATCH v3 1/7] ARM: OMAP2xxx: hwmod: Convert SHAM crypto device data to hwmod Mark A. Greer
2012-11-07 2:57 ` Mark A. Greer
2012-11-09 16:10 ` Kasatkin, Dmitry
2012-11-09 16:10 ` Kasatkin, Dmitry
2012-11-09 17:07 ` Mark A. Greer
2012-11-09 17:07 ` Mark A. Greer
2012-11-09 17:11 ` Paul Walmsley
2012-11-09 17:11 ` Paul Walmsley
2012-11-09 18:00 ` Tony Lindgren
2012-11-09 18:00 ` Tony Lindgren
2012-11-09 18:20 ` Mark A. Greer
2012-11-09 18:20 ` Mark A. Greer
2012-11-07 2:57 ` [PATCH v3 2/7] ARM: OMAP2xxx: hwmod: Add DMA support for SHAM module Mark A. Greer
2012-11-07 2:57 ` Mark A. Greer
2012-11-07 2:57 ` [PATCH v3 3/7] ARM: OMAP3xxx: hwmod: Convert SHAM crypto device data to hwmod Mark A. Greer
2012-11-07 2:57 ` Mark A. Greer
2012-11-09 16:11 ` Kasatkin, Dmitry
2012-11-09 16:11 ` Kasatkin, Dmitry
2012-11-07 2:57 ` [PATCH v3 4/7] ARM: OMAP2+: Remove unnecessary message when no SHA IP is present Mark A. Greer
2012-11-07 2:57 ` Mark A. Greer
2012-11-07 2:57 ` [PATCH v3 5/7] crypto: omap-sham: Convert to use pm_runtime API Mark A. Greer
2012-11-07 2:57 ` Mark A. Greer
2012-11-14 1:12 ` Kevin Hilman [this message]
2012-11-14 1:12 ` Kevin Hilman
2012-11-07 2:57 ` [PATCH v3 6/7] crypto: omap-sham: Add code to use dmaengine API Mark A. Greer
2012-11-07 2:57 ` Mark A. Greer
2012-11-07 2:57 ` [PATCH v3 7/7] crypto: omap_sham: Remove usage of private DMA API Mark A. Greer
2012-11-07 2:57 ` Mark A. Greer
2012-11-09 16:28 ` Kasatkin, Dmitry
2012-11-09 16:28 ` Kasatkin, Dmitry
2012-11-09 17:17 ` Mark A. Greer
2012-11-09 17:17 ` Mark A. Greer
2012-11-14 7:47 ` Kasatkin, Dmitry
2012-11-14 7:47 ` Kasatkin, Dmitry
2012-11-14 16:47 ` Mark A. Greer
2012-11-14 16:47 ` Mark A. Greer
2012-11-16 22:40 ` Mark A. Greer
2012-11-16 22:40 ` Mark A. Greer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87bof1f0n9.fsf@deeprootsystems.com \
--to=khilman@deeprootsystems.com \
--cc=davem@davemloft.net \
--cc=dmitry.kasatkin@intel.com \
--cc=herbert@gondor.apana.org.au \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-crypto@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=mgreer@animalcreek.com \
--cc=paul@pwsan.com \
--cc=rmk+kernel@arm.linux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.