From: Marc Zyngier <maz@kernel.org>
To: Peter Xu <peterx@redhat.com>
Cc: kvm@vger.kernel.org, catalin.marinas@arm.com,
andrew.jones@linux.dev, will@kernel.org, shan.gavin@gmail.com,
bgardon@google.com, dmatlack@google.com, pbonzini@redhat.com,
zhenyzha@redhat.com, shuah@kernel.org,
kvmarm@lists.cs.columbia.edu
Subject: Re: [PATCH 1/6] KVM: Use acquire/release semantics when accessing dirty ring GFN state
Date: Fri, 23 Sep 2022 15:19:56 +0100 [thread overview]
Message-ID: <87edw2jhpv.wl-maz@kernel.org> (raw)
In-Reply-To: <YyzV2Q/PZHPFMD6y@xz-m1.local>
On Thu, 22 Sep 2022 22:38:33 +0100,
Peter Xu <peterx@redhat.com> wrote:
>
> Marc,
>
> On Thu, Sep 22, 2022 at 06:01:28PM +0100, Marc Zyngier wrote:
> > The current implementation of the dirty ring has an implicit requirement
> > that stores to the dirty ring from userspace must be:
> >
> > - be ordered with one another
> >
> > - visible from another CPU executing a ring reset
> >
> > While these implicit requirements work well for x86 (and any other
> > TSO-like architecture), they do not work for more relaxed architectures
> > such as arm64 where stores to different addresses can be freely
> > reordered, and loads from these addresses not observing writes from
> > another CPU unless the required barriers (or acquire/release semantics)
> > are used.
> >
> > In order to start fixing this, upgrade the ring reset accesses:
> >
> > - the kvm_dirty_gfn_harvested() helper now uses acquire semantics
> > so it is ordered after all previous writes, including that from
> > userspace
> >
> > - the kvm_dirty_gfn_set_invalid() helper now uses release semantics
> > so that the next_slot and next_offset reads don't drift past
> > the entry invalidation
> >
> > This is only a partial fix as the userspace side also need upgrading.
>
> Paolo has one fix 4802bf910e ("KVM: dirty ring: add missing memory
> barrier", 2022-09-01) which has already landed.
What is this commit? It doesn't exist in the kernel as far as I can see.
>
> I think the other one to reset it was lost too. I just posted a patch.
>
> https://lore.kernel.org/qemu-devel/20220922213522.68861-1-peterx@redhat.com/
> (link still not yet available so far, but should be)
That's a QEMU patch, right?
>
> >
> > Signed-off-by: Marc Zyngier <maz@kernel.org>
> > ---
> > virt/kvm/dirty_ring.c | 4 ++--
> > 1 file changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/virt/kvm/dirty_ring.c b/virt/kvm/dirty_ring.c
> > index f4c2a6eb1666..784bed80221d 100644
> > --- a/virt/kvm/dirty_ring.c
> > +++ b/virt/kvm/dirty_ring.c
> > @@ -79,12 +79,12 @@ static inline void kvm_dirty_gfn_set_invalid(struct kvm_dirty_gfn *gfn)
> >
> > static inline void kvm_dirty_gfn_set_dirtied(struct kvm_dirty_gfn *gfn)
> > {
> > - gfn->flags = KVM_DIRTY_GFN_F_DIRTY;
> > + smp_store_release(&gfn->flags, KVM_DIRTY_GFN_F_DIRTY);
>
> IIUC you meant kvm_dirty_gfn_set_invalid as the comment says?
Gah, you're right, I redid the patch at the last minute and messed it
up....
> kvm_dirty_gfn_set_dirtied() has been guarded by smp_wmb() and AFAICT that's
> already safe. Otherwise looks good to me.
Indeed. Let me fix this.
Thanks,
M.
--
Without deviation from the norm, progress is not possible.
_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
WARNING: multiple messages have this Message-ID (diff)
From: Marc Zyngier <maz@kernel.org>
To: Peter Xu <peterx@redhat.com>
Cc: kvmarm@lists.cs.columbia.edu, kvm@vger.kernel.org,
catalin.marinas@arm.com, bgardon@google.com, shuah@kernel.org,
andrew.jones@linux.dev, will@kernel.org, dmatlack@google.com,
pbonzini@redhat.com, zhenyzha@redhat.com, shan.gavin@gmail.com,
gshan@redhat.com, James Morse <james.morse@arm.com>,
Suzuki K Poulose <suzuki.poulose@arm.com>,
Alexandru Elisei <alexandru.elisei@arm.com>,
Oliver Upton <oliver.upton@linux.dev>
Subject: Re: [PATCH 1/6] KVM: Use acquire/release semantics when accessing dirty ring GFN state
Date: Fri, 23 Sep 2022 15:19:56 +0100 [thread overview]
Message-ID: <87edw2jhpv.wl-maz@kernel.org> (raw)
In-Reply-To: <YyzV2Q/PZHPFMD6y@xz-m1.local>
On Thu, 22 Sep 2022 22:38:33 +0100,
Peter Xu <peterx@redhat.com> wrote:
>
> Marc,
>
> On Thu, Sep 22, 2022 at 06:01:28PM +0100, Marc Zyngier wrote:
> > The current implementation of the dirty ring has an implicit requirement
> > that stores to the dirty ring from userspace must be:
> >
> > - be ordered with one another
> >
> > - visible from another CPU executing a ring reset
> >
> > While these implicit requirements work well for x86 (and any other
> > TSO-like architecture), they do not work for more relaxed architectures
> > such as arm64 where stores to different addresses can be freely
> > reordered, and loads from these addresses not observing writes from
> > another CPU unless the required barriers (or acquire/release semantics)
> > are used.
> >
> > In order to start fixing this, upgrade the ring reset accesses:
> >
> > - the kvm_dirty_gfn_harvested() helper now uses acquire semantics
> > so it is ordered after all previous writes, including that from
> > userspace
> >
> > - the kvm_dirty_gfn_set_invalid() helper now uses release semantics
> > so that the next_slot and next_offset reads don't drift past
> > the entry invalidation
> >
> > This is only a partial fix as the userspace side also need upgrading.
>
> Paolo has one fix 4802bf910e ("KVM: dirty ring: add missing memory
> barrier", 2022-09-01) which has already landed.
What is this commit? It doesn't exist in the kernel as far as I can see.
>
> I think the other one to reset it was lost too. I just posted a patch.
>
> https://lore.kernel.org/qemu-devel/20220922213522.68861-1-peterx@redhat.com/
> (link still not yet available so far, but should be)
That's a QEMU patch, right?
>
> >
> > Signed-off-by: Marc Zyngier <maz@kernel.org>
> > ---
> > virt/kvm/dirty_ring.c | 4 ++--
> > 1 file changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/virt/kvm/dirty_ring.c b/virt/kvm/dirty_ring.c
> > index f4c2a6eb1666..784bed80221d 100644
> > --- a/virt/kvm/dirty_ring.c
> > +++ b/virt/kvm/dirty_ring.c
> > @@ -79,12 +79,12 @@ static inline void kvm_dirty_gfn_set_invalid(struct kvm_dirty_gfn *gfn)
> >
> > static inline void kvm_dirty_gfn_set_dirtied(struct kvm_dirty_gfn *gfn)
> > {
> > - gfn->flags = KVM_DIRTY_GFN_F_DIRTY;
> > + smp_store_release(&gfn->flags, KVM_DIRTY_GFN_F_DIRTY);
>
> IIUC you meant kvm_dirty_gfn_set_invalid as the comment says?
Gah, you're right, I redid the patch at the last minute and messed it
up....
> kvm_dirty_gfn_set_dirtied() has been guarded by smp_wmb() and AFAICT that's
> already safe. Otherwise looks good to me.
Indeed. Let me fix this.
Thanks,
M.
--
Without deviation from the norm, progress is not possible.
next prev parent reply other threads:[~2022-09-23 14:20 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-22 17:01 [PATCH 0/6] KVM: Fix dirty-ring ordering on weakly ordered architectures Marc Zyngier
2022-09-22 17:01 ` Marc Zyngier
2022-09-22 17:01 ` [PATCH 1/6] KVM: Use acquire/release semantics when accessing dirty ring GFN state Marc Zyngier
2022-09-22 17:01 ` Marc Zyngier
2022-09-22 21:38 ` Peter Xu
2022-09-22 21:38 ` Peter Xu
2022-09-22 23:46 ` Gavin Shan
2022-09-22 23:46 ` Gavin Shan
2022-09-23 14:40 ` Marc Zyngier
2022-09-23 14:40 ` Marc Zyngier
2022-09-23 14:19 ` Marc Zyngier [this message]
2022-09-23 14:19 ` Marc Zyngier
2022-09-23 14:22 ` Paolo Bonzini
2022-09-23 14:22 ` Paolo Bonzini
2022-09-22 17:01 ` [PATCH 2/6] KVM: Add KVM_CAP_DIRTY_LOG_RING_ORDERED capability and config option Marc Zyngier
2022-09-22 17:01 ` Marc Zyngier
2022-09-22 21:48 ` Peter Xu
2022-09-22 21:48 ` Peter Xu
2022-09-23 0:04 ` Gavin Shan
2022-09-23 0:04 ` Gavin Shan
2022-09-23 14:28 ` Marc Zyngier
2022-09-23 14:28 ` Marc Zyngier
2022-09-23 18:26 ` Peter Xu
2022-09-23 18:26 ` Peter Xu
2022-09-23 21:23 ` Paolo Bonzini
2022-09-23 21:23 ` Paolo Bonzini
2022-09-23 22:34 ` Peter Xu
2022-09-23 22:34 ` Peter Xu
2022-09-24 8:51 ` Marc Zyngier
2022-09-24 8:51 ` Marc Zyngier
2022-09-24 11:26 ` Marc Zyngier
2022-09-24 11:26 ` Marc Zyngier
2022-09-24 13:22 ` Peter Xu
2022-09-24 13:22 ` Peter Xu
2022-09-24 18:57 ` Marc Zyngier
2022-09-24 18:57 ` Marc Zyngier
2022-09-25 23:17 ` Gavin Shan
2022-09-25 23:17 ` Gavin Shan
2022-09-22 17:01 ` [PATCH 3/6] KVM: x86: Select CONFIG_HAVE_KVM_DIRTY_RING_ORDERED Marc Zyngier
2022-09-22 17:01 ` Marc Zyngier
2022-09-23 22:46 ` Peter Xu
2022-09-23 22:46 ` Peter Xu
2022-09-24 8:47 ` Marc Zyngier
2022-09-24 8:47 ` Marc Zyngier
2022-09-24 13:29 ` Peter Xu
2022-09-24 13:29 ` Peter Xu
2022-09-22 17:01 ` [PATCH 4/6] KVM: Document weakly ordered architecture requirements for dirty ring Marc Zyngier
2022-09-22 17:01 ` Marc Zyngier
2022-09-22 17:01 ` [PATCH 5/6] KVM: selftests: dirty-log: Upgrade dirty_gfn_set_collected() to store-release Marc Zyngier
2022-09-22 17:01 ` Marc Zyngier
2022-09-22 21:38 ` Paolo Bonzini
2022-09-22 21:38 ` Paolo Bonzini
2022-09-23 14:49 ` Marc Zyngier
2022-09-23 14:49 ` Marc Zyngier
2022-09-22 17:01 ` [PATCH 6/6] KVM: selftests: dirty-log: Use KVM_CAP_DIRTY_LOG_RING_ORDERED of available Marc Zyngier
2022-09-22 17:01 ` Marc Zyngier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87edw2jhpv.wl-maz@kernel.org \
--to=maz@kernel.org \
--cc=andrew.jones@linux.dev \
--cc=bgardon@google.com \
--cc=catalin.marinas@arm.com \
--cc=dmatlack@google.com \
--cc=kvm@vger.kernel.org \
--cc=kvmarm@lists.cs.columbia.edu \
--cc=pbonzini@redhat.com \
--cc=peterx@redhat.com \
--cc=shan.gavin@gmail.com \
--cc=shuah@kernel.org \
--cc=will@kernel.org \
--cc=zhenyzha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.