All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH 1/4] OMAP: voltage: pre- and post-transition notifiers
@ 2011-02-18  9:20 Mike Turquette
  2011-02-18  9:20 ` [PATCH 2/4] OMAP3630: add missing ABB PRM register definitions Mike Turquette
                   ` (3 more replies)
  0 siblings, 4 replies; 13+ messages in thread
From: Mike Turquette @ 2011-02-18  9:20 UTC (permalink / raw)
  To: linux-omap; +Cc: Mike Turquette

Introduce notifier infrastructure for VDD voltage transitions.  Users can
register a notifier prior to a VDD's volt_scale function getting called
(VOLTSCALE_PRECHANGE) or after the VDD has been scaled
(VOLTSCALE_POSTCHANGE).

Signed-off-by: Mike Turquette <mturquette@ti.com>
---
All patches in this series based on PM branch (b6fb54b) plus Vishwa's 13
OMAP3 DVFS patches (http://marc.info/?l=linux-omap&m=129561825804975&w=2).
Only validated on Zoom3 since OMAP4 DVFS patches were not available.

 arch/arm/mach-omap2/voltage.c             |   47 ++++++++++++++++++++++++++++-
 arch/arm/plat-omap/include/plat/voltage.h |   30 ++++++++++++++++++
 2 files changed, 76 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c
index a0bd73b..0cbc58a 100644
--- a/arch/arm/mach-omap2/voltage.c
+++ b/arch/arm/mach-omap2/voltage.c
@@ -729,6 +729,9 @@ static int __init omap3_vdd_data_configure(struct omap_vdd_info *vdd)
 		return -EINVAL;
 	}
 
+	/* initialize the voltage change notifier chain */
+	srcu_init_notifier_head(&vdd->volt_change_notify_chain);
+
 	if (!strcmp(vdd->voltdm.name, "mpu")) {
 		if (cpu_is_omap3630()) {
 			vdd->volt_data = omap36xx_vddmpu_volt_data;
@@ -912,6 +915,9 @@ static int __init omap4_vdd_data_configure(struct omap_vdd_info *vdd)
 		return -EINVAL;
 	}
 
+	/* initialize the voltage change notifier chain */
+	srcu_init_notifier_head(&vdd->volt_change_notify_chain);
+
 	if (!strcmp(vdd->voltdm.name, "mpu")) {
 		vdd->volt_data = omap44xx_vdd_mpu_volt_data;
 		vdd->vp_reg.tranxdone_status =
@@ -1201,7 +1207,9 @@ void omap_vp_disable(struct voltagedomain *voltdm)
 int omap_voltage_scale_vdd(struct voltagedomain *voltdm,
 		unsigned long target_volt)
 {
+	int ret;
 	struct omap_vdd_info *vdd;
+	struct omap_volt_change_info v_info;
 
 	if (!voltdm || IS_ERR(voltdm)) {
 		pr_warning("%s: VDD specified does not exist!\n", __func__);
@@ -1216,7 +1224,20 @@ int omap_voltage_scale_vdd(struct voltagedomain *voltdm,
 		return -ENODATA;
 	}
 
-	return vdd->volt_scale(vdd, target_volt);
+	/* load notifier chain data */
+	v_info.target_volt = target_volt;
+	v_info.vdd = vdd;
+
+	srcu_notifier_call_chain(&vdd->volt_change_notify_chain,
+			VOLTSCALE_PRECHANGE, (void *)&v_info);
+
+	ret = vdd->volt_scale(vdd, target_volt);
+
+	if (!ret)
+		srcu_notifier_call_chain(&vdd->volt_change_notify_chain,
+				VOLTSCALE_POSTCHANGE, (void *)&v_info);
+
+	return ret;
 }
 
 /**
@@ -1437,6 +1458,30 @@ struct voltagedomain *omap_voltage_domain_lookup(char *name)
 	return ERR_PTR(-EINVAL);
 }
 
+int omap_voltage_register_notifier(struct omap_vdd_info *vdd,
+		struct notifier_block *nb)
+{
+	if (!vdd || IS_ERR(vdd)) {
+		pr_warning("%s: invalid VDD specified\n", __func__);
+		return -EINVAL;
+	}
+
+	return srcu_notifier_chain_register(&vdd->volt_change_notify_chain,
+			nb);
+}
+
+int omap_voltage_unregister_notifier(struct omap_vdd_info *vdd,
+		struct notifier_block *nb)
+{
+	if (!vdd || IS_ERR(vdd)) {
+		pr_warning("%s: invalid VDD specified\n", __func__);
+		return -EINVAL;
+	}
+
+	return srcu_notifier_chain_unregister(&vdd->volt_change_notify_chain,
+			nb);
+}
+
 /**
  * omap_voltage_late_init() - Init the various voltage parameters
  *
diff --git a/arch/arm/plat-omap/include/plat/voltage.h b/arch/arm/plat-omap/include/plat/voltage.h
index e0b7f22..017e65b 100644
--- a/arch/arm/plat-omap/include/plat/voltage.h
+++ b/arch/arm/plat-omap/include/plat/voltage.h
@@ -15,10 +15,14 @@
 #define __ARCH_ARM_MACH_OMAP2_VOLTAGE_H
 
 #include <linux/err.h>
+#include <linux/notifier.h>
 
 #define VOLTSCALE_VPFORCEUPDATE		1
 #define VOLTSCALE_VCBYPASS		2
 
+#define VOLTSCALE_PRECHANGE		0
+#define VOLTSCALE_POSTCHANGE		1
+
 /*
  * OMAP3 GENERIC setup times. Revisit to see if these needs to be
  * passed from board or PMIC file
@@ -249,6 +253,7 @@ struct omap_vdd_info {
 	struct vc_reg_info vc_reg;
 	struct voltagedomain voltdm;
 	struct omap_vdd_dep_info *dep_vdd_info;
+	struct srcu_notifier_head volt_change_notify_chain;
 	int nr_dep_vdd;
 	struct dentry *debug_dir;
 	u32 curr_volt;
@@ -261,6 +266,17 @@ struct omap_vdd_info {
 		unsigned long target_volt);
 };
 
+/**
+ * omap_volt_change_info - container used by voltage notifier chain
+ *
+ * @vdd_info		: the voltage domain affected by the transition
+ * @target_volt		: voltage the affected domain is transitioning to
+ */
+struct omap_volt_change_info {
+	unsigned long target_volt;
+	struct omap_vdd_info *vdd;
+};
+
 unsigned long omap_vp_get_curr_volt(struct voltagedomain *voltdm);
 void omap_vp_enable(struct voltagedomain *voltdm);
 void omap_vp_disable(struct voltagedomain *voltdm);
@@ -280,6 +296,10 @@ void omap_change_voltscale_method(struct voltagedomain *voltdm,
 		int voltscale_method);
 /* API to get the voltagedomain pointer */
 struct voltagedomain *omap_voltage_domain_lookup(char *name);
+int omap_voltage_register_notifier(struct omap_vdd_info *vdd,
+		struct notifier_block *nb);
+int omap_voltage_unregister_notifier(struct omap_vdd_info *vdd,
+		struct notifier_block *nb);
 
 int omap_voltage_late_init(void);
 #else
@@ -298,6 +318,16 @@ static inline struct voltagedomain *omap_voltage_domain_lookup(char *name)
 {
 	return ERR_PTR(-EINVAL);
 }
+static inline int omap_voltage_register_notifier(struct omap_vdd_info *vdd,
+		struct notifier block *nb)
+{
+	return 0;
+}
+static inline int omap_voltage_unregister_notifier(struct omap_vdd_info *vdd,
+		struct notifier block *nb)
+{
+	return 0;
+}
 #endif
 
 #endif
-- 
1.7.1


^ permalink raw reply related	[flat|nested] 13+ messages in thread
end of thread, other threads:[~2011-03-04  4:53 UTC | newest]

Thread overview: 13+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-02-18  9:20 [PATCH 1/4] OMAP: voltage: pre- and post-transition notifiers Mike Turquette
2011-02-18  9:20 ` [PATCH 2/4] OMAP3630: add missing ABB PRM register definitions Mike Turquette
2011-02-18  9:20 ` [PATCH 3/4] OMAP: Voltage: add ABB structures and data Mike Turquette
2011-03-01 22:05   ` Kevin Hilman
2011-02-18  9:20 ` [PATCH 4/4] OMAP: Voltage: Adaptive Body-Bias handlers Mike Turquette
2011-02-19  0:29   ` David Cohen
2011-02-21 10:31   ` Gulati, Shweta
2011-02-21 19:47     ` Turquette, Mike
2011-02-21 23:01       ` Cousson, Benoit
2011-02-28  9:35       ` Gulati, Shweta
2011-03-01 17:30         ` Turquette, Mike
2011-03-04  4:53           ` Gulati, Shweta
2011-03-01 22:06 ` [PATCH 1/4] OMAP: voltage: pre- and post-transition notifiers Kevin Hilman

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.