Re: lguest: unhandled trap 13 and CONFIG_MICROCODE_INTEL_EARLY

Re: lguest: unhandled trap 13 and CONFIG_MICROCODE_INTEL_EARLY

[Rusty Russell]

Paul Bolle <pebolle-IWqWACnzNjzz+pZb47iToQ@public.gmane.org> writes:
> 0) Since v3.9 launching a guest kernel with the lguest tool triggers an
> "unhandled trap 13" error if CONFIG_MICROCODE_INTEL_EARLY is set (and
> one runs on an Intel CPU). That option was introduced in v3.9.

Yech... me too:

lguest: unhandled trap 13 at 0x537b8d (0x0)

> 1) For instance, on qemu I ran into this error:
>     lguest: unhandled trap 13 at 0x97087d (0x0)
>
> 2) Disassembling that address (with the page offset added) in vmlinux
> (in gdb) showed:
>
> Dump of assembler code for function collect_cpu_info_early:
>    0xc09707e4 <+0>:     push   %ebp
>    [...]
>    0xc097087d <+153>:   wrmsr  
>    [...]
>    0xc09708a5 <+193>:   ret    
> End of assembler dump.
>
> 3) The internet tells me wrmsr will trigger a general protection fault
> if the CPU is not running in ring 0. And a guest kernel seems to do that
> since v3.9:
>
> arch/x86/kernel/head_32.S:call load_ucode_bsp
>      arch/x86/kernel/microcode_core_early.c:load_ucode_bsp()
>          arch/x86/kernel/microcode_intel_early.c:_load_ucode_intel_bsp()
>                                                      collect_cpu_info_early()

Yes, there's also the known issue that CONFIG_OLPC breaks lguest boot.

HPA, how about we extend the KEEP_SEGMENTS flag to mean "don't touch
privileged registers" in general?  That's what it used to do when it
was introduced, and AFAIK only lguest uses it.  Xen folk CC'd.

%ebx seems to be free, how about something like this?

Subject: x86: treat KEEP_SEGMENTS flag as advice not to try any privileged operations

The i386 boot path used to only do one privileged thing before entering the
per-platform boot-path: load segments.  Thus KEEP_SEGMENTS was born, used
by lguest (and could be used by others like Xen).

CONFIG_OLPC and CONFIG_MICROCODE_EARLY were added since then, so with those
options, lguest guest crash.  I've been telling people to turn them off, but
that's a bit naff.

Expand KEEP_SEGMENTS to mean "don't try to do ring0 stuff" and it does the
right thing.

Signed-off-by: Rusty Russell <rusty-8n+1lVoiYb80n/F98K4Iww@public.gmane.org>

diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index 73afd11..8b50829 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -89,8 +89,9 @@ ENTRY(startup_32)
 	movl pa(stack_start),%ecx
 	
 	/* test KEEP_SEGMENTS flag to see if the bootloader is asking
-		us to not reload segments */
-	testb $(1<<6), BP_loadflags(%esi)
+		us to not reload segments: keep in %ebx. */
+	movb BP_loadflags(%esi),%ebx
+	andb $(1<<6),%ebx
 	jnz 2f
 
 /*
@@ -138,6 +139,9 @@ ENTRY(startup_32)
 	movsl
 1:
 
+	/* KEEP_SEGMENTS implies we don't touch priv regs at all. */
+	andb %ebx,%ebx
+	jnz 2f
 #ifdef CONFIG_OLPC
 	/* save OFW's pgdir table for later use when calling into OFW */
 	movl %cr3, %eax
@@ -149,6 +153,7 @@ ENTRY(startup_32)
 	call load_ucode_bsp
 #endif
 
+2:
 /*
  * Initialize page tables.  This creates a PDE and a set of page
  * tables, which are located immediately beyond __brk_base.  The variable

Re: lguest: unhandled trap 13 and CONFIG_MICROCODE_INTEL_EARLY

[H. Peter Anvin]

On 05/05/2013 09:22 PM, Rusty Russell wrote:
> 
> HPA, how about we extend the KEEP_SEGMENTS flag to mean "don't touch
> privileged registers" in general?  That's what it used to do when it
> was introduced, and AFAIK only lguest uses it.  Xen folk CC'd.
> 

KEEP_SEGMENTS was introduced at the request of Xen, not lguest.  I'm a
bit concerned about extending it as I don't know what else might end up
being affected.

On that subject, I would genuinely like to have a discussion of the
value vs. pain of continuing to support lguest.  It has not been a
*huge* problem, especially not compared to Xen, but core
paravirtualization has turned out to be a maintenance nightmare and it
has had an enormous negative impact on development work.

That being said, lguest really hasn't been a huge problem, but partly it
is a "level of support" thing...

	-hpa

Re: lguest: unhandled trap 13 and CONFIG_MICROCODE_INTEL_EARLY

[Rusty Russell]

"H. Peter Anvin" <hpa-YMNOUZJC4hwAvxtiuMwx3w@public.gmane.org> writes:
> On 05/05/2013 09:22 PM, Rusty Russell wrote:
>> 
>> HPA, how about we extend the KEEP_SEGMENTS flag to mean "don't touch
>> privileged registers" in general?  That's what it used to do when it
>> was introduced, and AFAIK only lguest uses it.  Xen folk CC'd.
>> 
>
> KEEP_SEGMENTS was introduced at the request of Xen, not lguest.  I'm a
> bit concerned about extending it as I don't know what else might end up
> being affected.

Not sure if they ever used it, or if they still have their own entry
point.

All this stuff (OLPC and early microcode) probably belongs after we jump
to the platform handler: the microcode calls to native_cpuid() is a clue
that we're doing something *badly* wrong.

It's easy enough for lguest to decode and skip the unsupported
instructions, though I've preferred not to do that.

> On that subject, I would genuinely like to have a discussion of the
> value vs. pain of continuing to support lguest.  It has not been a
> *huge* problem, especially not compared to Xen, but core
> paravirtualization has turned out to be a maintenance nightmare and it
> has had an enormous negative impact on development work.
>
> That being said, lguest really hasn't been a huge problem, but partly it
> is a "level of support" thing...

Yeah, I always figured when paravirt_ops goes, lguest goes.  By that
stage, every reasonable piece of hardware should have VT support, so if
lguest really wants to continue it can switch to that.  Which makes it
look a lot like bhyve, I guess.

What's *really* weird is that there's been a burst of lguest activity in
the last couple of months.  Someone's even reviving lguest64.  So maybe
it's not dead yet.

Cheers,
Rusty.

Re: [Lguest] lguest: unhandled trap 13 and CONFIG_MICROCODE_INTEL_EARLY

[Konrad Rzeszutek Wilk]

On Tue, May 07, 2013 at 02:48:15PM +0930, Rusty Russell wrote:
> "H. Peter Anvin" <hpa@zytor.com> writes:
> > On 05/05/2013 09:22 PM, Rusty Russell wrote:
> >> 
> >> HPA, how about we extend the KEEP_SEGMENTS flag to mean "don't touch
> >> privileged registers" in general?  That's what it used to do when it
> >> was introduced, and AFAIK only lguest uses it.  Xen folk CC'd.
> >> 
> >
> > KEEP_SEGMENTS was introduced at the request of Xen, not lguest.  I'm a
> > bit concerned about extending it as I don't know what else might end up
> > being affected.
> 
> Not sure if they ever used it, or if they still have their own entry
> point.

I don't ever recall it being used. But git commit bd53147db8bdf5dd49025c198ff18ac23f560e0e
says

    Both x86 and x86_64 support the same boot protocol so we need
    to implement the KEEP_SEGMENTS on x86_64 as well.  It isn't
    just paravirt bootloaders that could use this functionality.

And a quick Google search tells me:
http://lkml.indiana.edu/hypermail/linux/kernel/1102.0/01422.html

I think the only potential user is whatever Eric Biederman thought off?

> 
> All this stuff (OLPC and early microcode) probably belongs after we jump
> to the platform handler: the microcode calls to native_cpuid() is a clue
> that we're doing something *badly* wrong.
> 
> It's easy enough for lguest to decode and skip the unsupported
> instructions, though I've preferred not to do that.
> 
> > On that subject, I would genuinely like to have a discussion of the
> > value vs. pain of continuing to support lguest.  It has not been a
> > *huge* problem, especially not compared to Xen, but core
> > paravirtualization has turned out to be a maintenance nightmare and it
> > has had an enormous negative impact on development work.

<scratches his head>

I think this kind of discussion is best done face-to-face b/c people can
become emotional and then this discussion turns in the craper.

If I am reading you right the #1 issue is that you don't know whether
a certain paravirt instruction has any side-effects and as such you don't
feel that you can treat it like an equivalent instruction that is defined
in the Intel SDM?

And that means that any development work you have in the pipeline is
affected because you don't have the documentation on hand and are unsure
whether you will break something?

> >
> > That being said, lguest really hasn't been a huge problem, but partly it
> > is a "level of support" thing...
> 
> Yeah, I always figured when paravirt_ops goes, lguest goes.  By that
> stage, every reasonable piece of hardware should have VT support, so if
> lguest really wants to continue it can switch to that.  Which makes it
> look a lot like bhyve, I guess.
> 
> What's *really* weird is that there's been a burst of lguest activity in
> the last couple of months.  Someone's even reviving lguest64.  So maybe
> it's not dead yet.
> 
> Cheers,
> Rusty.
> 
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xen.org
> http://lists.xen.org/xen-devel
> 

Re: [Xen-devel] lguest: unhandled trap 13 and CONFIG_MICROCODE_INTEL_EARLY

[H. Peter Anvin]

On 05/08/2013 10:20 AM, Konrad Rzeszutek Wilk wrote:
> 
> If I am reading you right the #1 issue is that you don't know whether
> a certain paravirt instruction has any side-effects and as such you don't
> feel that you can treat it like an equivalent instruction that is defined
> in the Intel SDM?
> 
> And that means that any development work you have in the pipeline is
> affected because you don't have the documentation on hand and are unsure
> whether you will break something?
> 

That is, indeed, the #1 issue (and you and I have discussed it at
length, obviously.)

There are a few other issues:

2. some of the paravirt_ops are plain wrong.  Most of the really big
problems are in the MMU-related ones, but as an easily-explained example
that I ran into the other day:

read_cr4_safe() assumes that there is no useful distinction between "cr4
is zero" and "cr4 doesn't exist".  Unfortunately, this is an invalid
assumption.  It would be a five-minute fix in the normal case, but since
it is paravirtualized, fixing it involves grokking the semantics of each
PV layer, including any of the hypercalls that may be involved.

In this particular example I think the answer is actually reasonable
simple, because I don't think any of the hypervisors support running on
pre-cr4 hardware (basically 486 at this point.)

3. "Let's add another hook" becomes a far too easy solution to new problems.

4. Performance and maintainability impact of having to support multiple
code flows with different semantics.  The semantics of the Xen MMU, in
particular, is actually quite different from the x86 MMU.

5. Performance and maintainability impact of a maze of twisty little
functions, all different.  For example, in the case of some of the MSR
functions, we actually end up telling the compiler to combine and break
up the two 32-bit halves into a 64-bit register multiple times, because
the functions don't actually match up.  I still don't understand why we
don't just patch out the rdmsr/wrmsr instructions, using those registers.

	-hpa

Is: paravirt docs and diet. Was:Re: [Lguest] lguest: unhandled trap 13 and CONFIG_MICROCODE_INTEL_EARLY

[Konrad Rzeszutek Wilk]

On Wed, May 8, 2013 at 8:47 PM, Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> wrote:
> On Wed, May 08, 2013 at 11:07:33AM -0700, H. Peter Anvin wrote:
>> On 05/08/2013 10:20 AM, Konrad Rzeszutek Wilk wrote:
>> >
>> > If I am reading you right the #1 issue is that you don't know whether
>> > a certain paravirt instruction has any side-effects and as such you don't
>> > feel that you can treat it like an equivalent instruction that is defined
>> > in the Intel SDM?
>> >
>> > And that means that any development work you have in the pipeline is
>> > affected because you don't have the documentation on hand and are unsure
>> > whether you will break something?
>> >
>>
>> That is, indeed, the #1 issue (and you and I have discussed it at
>> length, obviously.)
>

First of thank you for enumerating the issues and clarifying them.

My understanding was (until this email conversation) was that the
lack of the hypercall docs was hindering you. However you are not
interested in that - you are after the documentation for the paravirt
interface. Specifically how it differs from what baremetal would do.
That changes my priorities!

In that case lguest provides an excellent source of documentation on
how the paravirt interfaces should work. It is almost like reading a book.

Perhaps moving them to paravirt.h will help. There are of course
some differences between the platforms that use it - but that would help
identify them. 

>> There are a few other issues:
>>
>> 2. some of the paravirt_ops are plain wrong.  Most of the really big
>> problems are in the MMU-related ones, but as an easily-explained example
>> that I ran into the other day:
>>
>> read_cr4_safe() assumes that there is no useful distinction between "cr4
>> is zero" and "cr4 doesn't exist".  Unfortunately, this is an invalid
>> assumption.  It would be a five-minute fix in the normal case, but since
>> it is paravirtualized, fixing it involves grokking the semantics of each
>> PV layer, including any of the hypercalls that may be involved.
>>
>> In this particular example I think the answer is actually reasonable
>> simple, because I don't think any of the hypervisors support running on
>> pre-cr4 hardware (basically 486 at this point.)
>

>From my understanding the paravirt interface was a shim for three platforms
(VMware, Xen and lguest). And the API was choosen to be broad to encompass
everything.  That was then and nowadays Xen and lguest are the top users.
And there are things that don't make sense anymore (like the example above).

Your specific example is interesting as a quick 10 second lookup confirmed
that the implementation for different paravirt platforms all point to
native_read_cr4().  There are no PV hypercalls involved. Axe!

We had a public discussion on this and I think determined that the paravit_ops
can benefit from a diet. Certainly the [read|write]_msr_safe that was
introduced by Borislav Petkov per your suggestion was a good candidate.

So was the store_gdt. I think the read_tsc and this one (read_cr4) can be
slashed too.  Not sure about the idt ones but I hadn't done a careful
examination of that.

I hope it is clear that there is no resistance from me in this diet-program.
The issue I face to help you are the same you do: priority - those merge windows,
darn bugs, regressions, etc.

And until this conversation I was under the impression the documentation
for hypercalls was #1 - but that is more of a #3 (#2 being the
diet program, #1 being the paravirt documentation).

>>
>> 3. "Let's add another hook" becomes a far too easy solution to new problems.
>

I would hope that with your help in brainstorming these problems one can figure
out that right way of doing it. Perhaps instead of posting the patches
first, one can solicit you first for help to design it properly from the start?

>
>>
>> 4. Performance and maintainability impact of having to support multiple
>> code flows with different semantics.  The semantics of the Xen MMU, in
>> particular, is actually quite different from the x86 MMU.
>

You along with Thomas had designed a nice way of not only making this code
nicely but also cleaning up the code. And I hope we all learned more
about the Xen RO/pinning/pagetables protection mechanism. The semantics
are understood now.

In terms of development however, I recall that you as a excellent
maintainer was able to delegate the work to an Oracle employee and
everybody pitched in to help review the code and test. We did not test
a forced branch which had some extra patches and that bit us all
in the merge window.

The after effect is quite nice code and design.
>
>
>>
>> 5. Performance and maintainability impact of a maze of twisty little
>> functions, all different.  For example, in the case of some of the MSR
>> functions, we actually end up telling the compiler to combine and break
>> up the two 32-bit halves into a 64-bit register multiple times, because
>> the functions don't actually match up.  I still don't understand why we
>> don't just patch out the rdmsr/wrmsr instructions, using those registers.

My understanding is that there are two variants of paravirt patching:
inline patching (for a selective bunch of them), and patch in a call.

The inline patching is the more efficient one and the functions that
were choosen for this were the performance sensitive. I think at the
time this was designed the rdmsr/wrmsr instructions were not terribly
fast.

I think that some of these paravirt interfaces could be optimized now.

One idea that I had been toying around and asked the ksplice team to
prototype was the usage of the asm goto mechanism. It only did it for
the pte_modify call but I never got to run the performance numbers
on all the different architectures.

In summary I think (and please correct me if I mis-understood you):
 - The paravirt interfaces documentation should be #1 priority,
 - Fixes, diet and optimization for paravirt infrastructure is needed.


And since we don't want to hinder your development and I would need
to reschedule work-items I have to ask - what are the development work
that is hindering this? So I have an idea of the timelines (if this
needs to be an NDA discussion, pls email me privately your manager's
email so I can start the discussion on that).


Lastly, a bit seperate topic, but close, I thought that the paravirt
interface was under x86 maintainers ownership, but the MAINTAINERS 
file says otherwise!

Jeremy, Rusty, are you OK with this. Rusty, would you have the time to
review the patches or would it be easier if I was the sole person ?

>From f622669a3b6e05d2962e3886ef8b46add18b1e6c Mon Sep 17 00:00:00 2001
From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Date: Fri, 10 May 2013 10:41:22 -0400
Subject: [PATCH] MAINTAINERS: Become the maintainer of the paravirt interface.

Somehow I thought the x86 team owned it. Time to step up
and maintain this and put the paravirt interface on a diet!

CC: Jeremy Fitzhardinge <jeremy@goop.org>
CC: Chris Wright <chrisw@sous-sol.org>
CC: Alok Kataria <akataria@vmware.com>
CC: Rusty Russell <rusty@rustcorp.com.au>
CC: virtualization@lists.linux-foundation.org

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
---
 MAINTAINERS | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index 3d7782b..7e24105 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6044,10 +6044,8 @@ F:	drivers/char/ppdev.c
 F:	include/uapi/linux/ppdev.h
 
 PARAVIRT_OPS INTERFACE
-M:	Jeremy Fitzhardinge <jeremy@goop.org>
-M:	Chris Wright <chrisw@sous-sol.org>
-M:	Alok Kataria <akataria@vmware.com>
 M:	Rusty Russell <rusty@rustcorp.com.au>
+M:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
 L:	virtualization@lists.linux-foundation.org
 S:	Supported
 F:	Documentation/ia64/paravirt_ops.txt
-- 
1.8.1.4

Re: Is: paravirt docs and diet. Was:Re: [Xen-devel] lguest: unhandled trap 13 and CONFIG_MICROCODE_INTEL_EARLY

[H. Peter Anvin]

On 05/10/2013 07:51 AM, Konrad Rzeszutek Wilk wrote:
> 
> First of thank you for enumerating the issues and clarifying them.
> 

Thank you for the writeup, and for all the work you personally have done
in making things *much* smoother than they have been in the past.  I
don't want to make it sound like I'm just bellyaching here.

In the end, pvops is effectively driverizing the CPU (and a bunch of
other things, some of which should be separately driverized... that work
is happening too, of course.)  Driverizing the CPU is really, really
hard, although it can be done well; it just needs to be documented down
to the level of detail the CPU itself is.  The current CPU documentation
is 3044 pages long ;)

> My understanding was (until this email conversation) was that the
> lack of the hypercall docs was hindering you. However you are not
> interested in that - you are after the documentation for the paravirt
> interface. Specifically how it differs from what baremetal would do.
> That changes my priorities!
> 
> In that case lguest provides an excellent source of documentation on
> how the paravirt interfaces should work. It is almost like reading a book.
> 
> Perhaps moving them to paravirt.h will help. There are of course
> some differences between the platforms that use it - but that would help
> identify them. 
> 

Sort of, but not really.  Unless each pvop is documented to the same
extent at the native operations they implement, there is no way to
deduce the necessary conditions from an example, no matter how
well-written.  That means that the pvop users themselves have to be
comprehensible, too.  This is particularly important when we want to
change the pvops themselves, as that is a kernel-internal interface as
opposed to the hypervisor interface which is an external ABI.

[... lots of good stuff snipped ...]

> Your specific example is interesting as a quick 10 second lookup confirmed
> that the implementation for different paravirt platforms all point to
> native_read_cr4().  There are no PV hypercalls involved. Axe!

Lguest uses these pvops to avoid touching cr4 at all:

/* cr4 is used to enable and disable PGE, but we don't care. */
static unsigned long lguest_read_cr4(void)
{
        return 0;
}

static void lguest_write_cr4(unsigned long val)
{
}

Lguest doesn't even seem to have an implementation for read_cr4_safe; I
don't know what that means will happen.

> I hope it is clear that there is no resistance from me in this diet-program.
> The issue I face to help you are the same you do: priority - those merge windows,
> darn bugs, regressions, etc.

Of course.  Ultimately, we don't want to break things.  I would like to
see the Xen community more committed to a roadmap toward killing PV in
favor of HVM or what you call hybrid.

> And until this conversation I was under the impression the documentation
> for hypercalls was #1 - but that is more of a #3 (#2 being the
> diet program, #1 being the paravirt documentation).

That probably is a fair statement.

>>> 3. "Let's add another hook" becomes a far too easy solution to new problems.
> 
> I would hope that with your help in brainstorming these problems one can figure
> out that right way of doing it. Perhaps instead of posting the patches
> first, one can solicit you first for help to design it properly from the start?

Absolutely, and that is happening more and more.  Perhaps more in
general, "show me the code" in all honour, but "show me the design" first.

>>>
>>> 4. Performance and maintainability impact of having to support multiple
>>> code flows with different semantics.  The semantics of the Xen MMU, in
>>> particular, is actually quite different from the x86 MMU.
> 
> You along with Thomas had designed a nice way of not only making this code
> nicely but also cleaning up the code. And I hope we all learned more
> about the Xen RO/pinning/pagetables protection mechanism. The semantics
> are understood now.
> 
> In terms of development however, I recall that you as a excellent
> maintainer was able to delegate the work to an Oracle employee and
> everybody pitched in to help review the code and test. We did not test
> a forced branch which had some extra patches and that bit us all
> in the merge window.
> 
> The after effect is quite nice code and design.

Yes, in the end it ended up being a really nice piece of teamwork.
Kudos to everyone involved.

>>>
>>> 5. Performance and maintainability impact of a maze of twisty little
>>> functions, all different.  For example, in the case of some of the MSR
>>> functions, we actually end up telling the compiler to combine and break
>>> up the two 32-bit halves into a 64-bit register multiple times, because
>>> the functions don't actually match up.  I still don't understand why we
>>> don't just patch out the rdmsr/wrmsr instructions, using those registers.
> 
> My understanding is that there are two variants of paravirt patching:
> inline patching (for a selective bunch of them), and patch in a call.
> 
> The inline patching is the more efficient one and the functions that
> were choosen for this were the performance sensitive. I think at the
> time this was designed the rdmsr/wrmsr instructions were not terribly
> fast.

Yes.  The vast majority of all MSRs are not performance critical,
however, there is a small handful that are (and there are reasons to
believe the number will increase.)

> I think that some of these paravirt interfaces could be optimized now.
> 
> One idea that I had been toying around and asked the ksplice team to
> prototype was the usage of the asm goto mechanism. It only did it for
> the pte_modify call but I never got to run the performance numbers
> on all the different architectures.
> 
> In summary I think (and please correct me if I mis-understood you):
>  - The paravirt interfaces documentation should be #1 priority,
>  - Fixes, diet and optimization for paravirt infrastructure is needed.
> 
> And since we don't want to hinder your development and I would need
> to reschedule work-items I have to ask - what are the development work
> that is hindering this? So I have an idea of the timelines (if this
> needs to be an NDA discussion, pls email me privately your manager's
> email so I can start the discussion on that).

Here is the funny bit... it actually hinders small pieces of work more
than big pieces of work.  For someone who is already doing a bunch of
heavy lifting, it is much easier to amortize the cost of dealing with
any PV funnies that come into play, but if you were hoping to do a
10-line patch to fix a problem you're not going to prefix it with a
patch series to fix PV issues raised by the patch if you can at all
avoid it.

> Lastly, a bit seperate topic, but close, I thought that the paravirt
> interface was under x86 maintainers ownership, but the MAINTAINERS 
> file says otherwise!
> 
> Jeremy, Rusty, are you OK with this. Rusty, would you have the time to
> review the patches or would it be easier if I was the sole person ?

Yes, I suspect that is one of the problems we have had.  The paravirt
interface dates back to a time when there was no "de jure" x86
maintainer (Andi Kleen was maintaining x86-64, and Linus was
theoretically maintaining i386 as the "reference port" but didn't really
have the bandwidth) which didn't really help the situation any.

At the same time, I think we have realized over time just how hard this
is coupled.  This is a classic hook problem (and part of why hooks in
general are frowned upon in the kernel)... they are highly unobtrusive
when they are first created, but then they end up being fixed points for
the code around them, and people naturally like to avoid messing with
the fixed points... so the code around grows in unnatural ways.

That being said, the one single biggest issue is definitely the MMU.
That is the one area where PV and non-PV differs dramatically in
semantics, and it is also one of the most performance-critical parts of
the machine.


	-hpa

Re: Is: paravirt docs and diet. Was:Re: [Lguest] lguest: unhandled trap 13 and CONFIG_MICROCODE_INTEL_EARLY

[Matt Wilson]

On Fri, May 10, 2013 at 10:19:16AM -0700, H. Peter Anvin wrote:
> On 05/10/2013 07:51 AM, Konrad Rzeszutek Wilk wrote:
> > I hope it is clear that there is no resistance from me in this diet-program.
> > The issue I face to help you are the same you do: priority - those merge windows,
> > darn bugs, regressions, etc.
> 
> Of course.  Ultimately, we don't want to break things.  I would like to
> see the Xen community more committed to a roadmap toward killing PV in
> favor of HVM or what you call hybrid.

I think that there is broad agreement both that we want to move in
that direction, and also that a migration will take time to realize.

When you say "more committed," are you thinking of a declared
schedule? Or perhaps more visible progress toward that goal?

--msw

Re: [Xen-devel] Is: paravirt docs and diet. Was:Re: lguest: unhandled trap 13 and CONFIG_MICROCODE_INTEL_EARLY

[H. Peter Anvin]

More of a time target... even if far out.

Matt Wilson <msw-vV1OtcyAfmbQT0dZR+AlfA@public.gmane.org> wrote:

>On Fri, May 10, 2013 at 10:19:16AM -0700, H. Peter Anvin wrote:
>> On 05/10/2013 07:51 AM, Konrad Rzeszutek Wilk wrote:
>> > I hope it is clear that there is no resistance from me in this
>diet-program.
>> > The issue I face to help you are the same you do: priority - those
>merge windows,
>> > darn bugs, regressions, etc.
>> 
>> Of course.  Ultimately, we don't want to break things.  I would like
>to
>> see the Xen community more committed to a roadmap toward killing PV
>in
>> favor of HVM or what you call hybrid.
>
>I think that there is broad agreement both that we want to move in
>that direction, and also that a migration will take time to realize.
>
>When you say "more committed," are you thinking of a declared
>schedule? Or perhaps more visible progress toward that goal?
>
>--msw

-- 
Sent from my mobile phone. Please excuse brevity and lack of formatting.

Re: Is: paravirt docs and diet. Was:Re: [Lguest] lguest: unhandled trap 13 and CONFIG_MICROCODE_INTEL_EARLY

[Konrad Rzeszutek Wilk]

On Fri, May 10, 2013 at 11:07:10AM -0700, H. Peter Anvin wrote:
> More of a time target... even if far out.

The PVH (which is what Mukesh CC-ed here) not yet in the hypervisor
(even as an experiemental case). When that is in, and it works with
the base test-cases (launching guests, migration, etc) that would
start the clock.

We chatted about this last year at the Xen Developer meeting to
make sure we all are comfortable with this and also with the time
target. Which if I recall correctly was +5 years from the start of
the the base test-cases working and the PVH feature turned from
experimental to working.

Just to iterate, this would mean that a lot of paravirt MMU parts
would not been needed anymore.

Please note that 'killing PV' is a bit of broad word. The PV
(paravirtualization) of say drivers - so that we don't use emulated
drivers, or use faster IPIs, or what not - would not be eliminated.

This is just about paravirt ops reduction.

> 
> Matt Wilson <msw@amazon.com> wrote:
> 
> >On Fri, May 10, 2013 at 10:19:16AM -0700, H. Peter Anvin wrote:
> >> On 05/10/2013 07:51 AM, Konrad Rzeszutek Wilk wrote:
> >> > I hope it is clear that there is no resistance from me in this
> >diet-program.
> >> > The issue I face to help you are the same you do: priority - those
> >merge windows,
> >> > darn bugs, regressions, etc.
> >> 
> >> Of course.  Ultimately, we don't want to break things.  I would like
> >to
> >> see the Xen community more committed to a roadmap toward killing PV
> >in
> >> favor of HVM or what you call hybrid.
> >
> >I think that there is broad agreement both that we want to move in
> >that direction, and also that a migration will take time to realize.
> >
> >When you say "more committed," are you thinking of a declared
> >schedule? Or perhaps more visible progress toward that goal?
> >
> >--msw
> 
> -- 
> Sent from my mobile phone. Please excuse brevity and lack of formatting.
> 
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xen.org
> http://lists.xen.org/xen-devel
> 

Re: [Xen-devel] lguest: unhandled trap 13 and CONFIG_MICROCODE_INTEL_EARLY

[Rusty Russell]

Konrad Rzeszutek Wilk <konrad.wilk-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org> writes:
> On Tue, May 07, 2013 at 02:48:15PM +0930, Rusty Russell wrote:
>> "H. Peter Anvin" <hpa-YMNOUZJC4hwAvxtiuMwx3w@public.gmane.org> writes:
>> > On 05/05/2013 09:22 PM, Rusty Russell wrote:
>> >> 
>> >> HPA, how about we extend the KEEP_SEGMENTS flag to mean "don't touch
>> >> privileged registers" in general?  That's what it used to do when it
>> >> was introduced, and AFAIK only lguest uses it.  Xen folk CC'd.
>> >> 
>> >
>> > KEEP_SEGMENTS was introduced at the request of Xen, not lguest.  I'm a
>> > bit concerned about extending it as I don't know what else might end up
>> > being affected.
>> 
>> Not sure if they ever used it, or if they still have their own entry
>> point.
>
> I don't ever recall it being used. But git commit bd53147db8bdf5dd49025c198ff18ac23f560e0e
> says
>
>     Both x86 and x86_64 support the same boot protocol so we need
>     to implement the KEEP_SEGMENTS on x86_64 as well.  It isn't
>     just paravirt bootloaders that could use this functionality.
>
> And a quick Google search tells me:
> http://lkml.indiana.edu/hypermail/linux/kernel/1102.0/01422.html
>
> I think the only potential user is whatever Eric Biederman thought off?

OK, that confirms my understanding it's lguest-only.

To return to the immediate proposal: I'd like to expand it KEEP_SEGMENTS
to say "don't do any privileged ops before the platform entry point"
which is what it used to do (before we added those config options), and
still does (if they're disabled).

This fixes lguest for those configs, and if there *are* any other users,
this just means they don't support OLPC machines (since 2.6.37) or early
microcode (3.9).  OLPC + KEEP_SEGMENTS is vanishingly unlikely (the OLPC
bootloader doesn't use it), and early microcode never worked with
paravirt anyway (those native_cpuid() calls).

Failing that, second best to remove KEEP_SEGMENTS, and have lguest
'emulate' (ie. skip!) those instructions.  We already do this for in/out
instructions, see drivers/lguest/x86/core.c emulate_insn().  More code,
but it's lguest code.

Cheers,
Rusty.

Re: [Xen-devel] lguest: unhandled trap 13 and CONFIG_MICROCODE_INTEL_EARLY

[H. Peter Anvin]

On 05/08/2013 06:43 PM, Rusty Russell wrote:
> 
> OK, that confirms my understanding it's lguest-only.
> 
> To return to the immediate proposal: I'd like to expand it KEEP_SEGMENTS
> to say "don't do any privileged ops before the platform entry point"
> which is what it used to do (before we added those config options), and
> still does (if they're disabled).
> 
> This fixes lguest for those configs, and if there *are* any other users,
> this just means they don't support OLPC machines (since 2.6.37) or early
> microcode (3.9).  OLPC + KEEP_SEGMENTS is vanishingly unlikely (the OLPC
> bootloader doesn't use it), and early microcode never worked with
> paravirt anyway (those native_cpuid() calls).
> 
> Failing that, second best to remove KEEP_SEGMENTS, and have lguest
> 'emulate' (ie. skip!) those instructions.  We already do this for in/out
> instructions, see drivers/lguest/x86/core.c emulate_insn().  More code,
> but it's lguest code.
>

Or we can skip the microcode stuff for platform == 2.

	-hpa

Re: [Xen-devel] lguest: unhandled trap 13 and CONFIG_MICROCODE_INTEL_EARLY

[Paul Bolle]

On Wed, 2013-05-08 at 20:24 -0700, H. Peter Anvin wrote:
> On 05/08/2013 06:43 PM, Rusty Russell wrote:
> > 
> > OK, that confirms my understanding it's lguest-only.
> > 
> > To return to the immediate proposal: I'd like to expand it KEEP_SEGMENTS
> > to say "don't do any privileged ops before the platform entry point"
> > which is what it used to do (before we added those config options), and
> > still does (if they're disabled).
> > 
> > This fixes lguest for those configs, and if there *are* any other users,
> > this just means they don't support OLPC machines (since 2.6.37) or early
> > microcode (3.9).  OLPC + KEEP_SEGMENTS is vanishingly unlikely (the OLPC
> > bootloader doesn't use it), and early microcode never worked with
> > paravirt anyway (those native_cpuid() calls).
> > 
> > Failing that, second best to remove KEEP_SEGMENTS, and have lguest
> > 'emulate' (ie. skip!) those instructions.  We already do this for in/out
> > instructions, see drivers/lguest/x86/core.c emulate_insn().  More code,
> > but it's lguest code.
> >
> 
> Or we can skip the microcode stuff for platform == 2.

And could the OLPC specific code
    movl %cr3, %eax
    movl %eax, pa(olpc_ofw_pgd)

in head_32.S perhaps be moved to (just before) the enable_paging label?

I don't think anything cares about %cr3 before that, so it won't
interfere with OLPC's  (creative?) use of that register. And
olpc_ofw_pgd seems to be only used much later on, as the call chain
looks something like:

ENTRY(initial_code)
    i386_start_kernel()
        start_kernel()
            setup_arch()
                setup_olpc_ofw_pgd()
                    early_ioremap(olpc_ofw_pgd, [...]);

That would move those two OLPC specific lines to a point were
pv_mmu_ops.read_cr3 points to lguest_read_cr3() so lguest can handle
them, wouldn't it?


Paul Bolle

Re: lguest: unhandled trap 13 and CONFIG_MICROCODE_INTEL_EARLY

[H. Peter Anvin]

On 05/06/2013 10:18 PM, Rusty Russell wrote:
> 
> All this stuff (OLPC and early microcode) probably belongs after we jump
> to the platform handler: the microcode calls to native_cpuid() is a clue
> that we're doing something *badly* wrong.
> 
> It's easy enough for lguest to decode and skip the unsupported
> instructions, though I've preferred not to do that.
> 

Depends on the platform, but yes, it applies to native, CE4100, and
Moorestown/SFI platforms, but not Xen or lguest, so that pretty much
makes sense.

	-hpa