* [dovetail][PATCH] clocksource/exynos_mct: irq_pipeline: set clockevent IRQs
@ 2026-11-17 5:06 Jan Kiszka
2026-11-18 9:08 ` Philippe Gerum
0 siblings, 1 reply; 2+ messages in thread
From: Jan Kiszka @ 2026-11-17 5:06 UTC (permalink / raw)
To: Xenomai, Philippe Gerum
From: Jan Kiszka <jan.kiszka@siemens.com>
The MCT driver only fills clock_event_device::irq for the local timers
in SPI mode. In PPI mode (samsung,exynos4412-mct), the per-CPU tick
devices were left with IRQ 0, so the proxy tick device never switched
the local timer interrupt to out-of-band mode, and the in-band tick ran
on registers which were never saved, making every tick look like a
user mode tick on ARM. The global comparator device had the same
omission.
Assisted-by: opencode:Opus-5.5
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---
drivers/clocksource/exynos_mct.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c
index 23d39bf9bdaf9..a548ac338f3bc 100644
--- a/drivers/clocksource/exynos_mct.c
+++ b/drivers/clocksource/exynos_mct.c
@@ -350,6 +350,7 @@ static irqreturn_t exynos4_mct_comp_isr(int irq, void *dev_id)
static int exynos4_clockevent_init(void)
{
mct_comp_device.cpumask = cpumask_of(0);
+ mct_comp_device.irq = mct_irqs[MCT_G0_IRQ];
clockevents_config_and_register(&mct_comp_device, clk_rate,
0xf, 0xffffffff);
if (request_irq(mct_irqs[MCT_G0_IRQ], exynos4_mct_comp_isr,
@@ -487,6 +488,7 @@ static int exynos4_mct_starting_cpu(unsigned int cpu)
irq_force_affinity(evt->irq, cpumask_of(cpu));
enable_irq(evt->irq);
} else {
+ evt->irq = mct_irqs[MCT_L0_IRQ];
enable_percpu_irq(mct_irqs[MCT_L0_IRQ], 0);
}
clockevents_config_and_register(evt, clk_rate / (TICK_BASE_CNT + 1),
--
2.47.3
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [dovetail][PATCH] clocksource/exynos_mct: irq_pipeline: set clockevent IRQs
2026-11-17 5:06 [dovetail][PATCH] clocksource/exynos_mct: irq_pipeline: set clockevent IRQs Jan Kiszka
@ 2026-11-18 9:08 ` Philippe Gerum
0 siblings, 0 replies; 2+ messages in thread
From: Philippe Gerum @ 2026-11-18 9:08 UTC (permalink / raw)
To: Jan Kiszka; +Cc: Xenomai
Jan Kiszka <jan.kiszka@siemens.com> writes:
> From: Jan Kiszka <jan.kiszka@siemens.com>
>
> The MCT driver only fills clock_event_device::irq for the local timers
> in SPI mode. In PPI mode (samsung,exynos4412-mct), the per-CPU tick
> devices were left with IRQ 0, so the proxy tick device never switched
> the local timer interrupt to out-of-band mode, and the in-band tick ran
> on registers which were never saved, making every tick look like a
> user mode tick on ARM. The global comparator device had the same
> omission.
>
> Assisted-by: opencode:Opus-5.5
> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
> ---
> drivers/clocksource/exynos_mct.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c
> index 23d39bf9bdaf9..a548ac338f3bc 100644
> --- a/drivers/clocksource/exynos_mct.c
> +++ b/drivers/clocksource/exynos_mct.c
> @@ -350,6 +350,7 @@ static irqreturn_t exynos4_mct_comp_isr(int irq, void *dev_id)
> static int exynos4_clockevent_init(void)
> {
> mct_comp_device.cpumask = cpumask_of(0);
> + mct_comp_device.irq = mct_irqs[MCT_G0_IRQ];
> clockevents_config_and_register(&mct_comp_device, clk_rate,
> 0xf, 0xffffffff);
> if (request_irq(mct_irqs[MCT_G0_IRQ], exynos4_mct_comp_isr,
> @@ -487,6 +488,7 @@ static int exynos4_mct_starting_cpu(unsigned int cpu)
> irq_force_affinity(evt->irq, cpumask_of(cpu));
> enable_irq(evt->irq);
> } else {
> + evt->irq = mct_irqs[MCT_L0_IRQ];
> enable_percpu_irq(mct_irqs[MCT_L0_IRQ], 0);
> }
> clockevents_config_and_register(evt, clk_rate / (TICK_BASE_CNT + 1),
Merged, thanks.
--
Philippe.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2026-11-18 9:08 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-11-17 5:06 [dovetail][PATCH] clocksource/exynos_mct: irq_pipeline: set clockevent IRQs Jan Kiszka
2026-11-18 9:08 ` Philippe Gerum
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.