* [PATCH 0/3] arm: dts: am625/am62a7: Switch over to OF_UPSTREAM
@ 2024-06-05 15:27 Nishanth Menon
2024-06-05 15:27 ` [PATCH 1/3] arm: dts: am625_beagleplay: Switch " Nishanth Menon
` (5 more replies)
0 siblings, 6 replies; 9+ messages in thread
From: Nishanth Menon @ 2024-06-05 15:27 UTC (permalink / raw)
To: Tom Rini
Cc: Dhruva Gole, Bryan Brattlof, Vignesh Raghavendra, Robert Nelson,
u-boot, Nishanth Menon
Cleanup am625 on by switching over the last two platforms (SK and
beagleplay) over to OF_UPSTREAM, and while at it, switch over am62a7
(last of the am62* family) over as well.
This superscedes the previous version of beagleplay only patch[1]
Test logs: https://gist.github.com/nmenon/ba310d3750a80789aca6a4fd90190135
Nishanth Menon (3):
arm: dts: am625_beagleplay: Switch to OF_UPSTREAM
arm: dts: am625_sk: Switch to OF_UPSTREAM
arm: dts: am62a7_sk: Switch to OF_UPSTREAM
arch/arm/dts/Makefile | 7 +-
arch/arm/dts/k3-am62-main.dtsi | 1058 ------------------
arch/arm/dts/k3-am62-mcu.dtsi | 176 ---
arch/arm/dts/k3-am62-thermal.dtsi | 36 -
arch/arm/dts/k3-am62-wakeup.dtsi | 96 --
arch/arm/dts/k3-am62.dtsi | 122 --
arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi | 4 +-
arch/arm/dts/k3-am625-beagleplay.dts | 932 ---------------
arch/arm/dts/k3-am625-sk-binman.dtsi | 2 +-
arch/arm/dts/k3-am625-sk.dts | 299 -----
arch/arm/dts/k3-am625.dtsi | 155 ---
arch/arm/dts/k3-am62a-main.dtsi | 1054 -----------------
arch/arm/dts/k3-am62a-mcu.dtsi | 170 ---
arch/arm/dts/k3-am62a-sk-binman.dtsi | 2 +-
arch/arm/dts/k3-am62a-thermal.dtsi | 50 -
arch/arm/dts/k3-am62a-wakeup.dtsi | 73 --
arch/arm/dts/k3-am62a.dtsi | 125 ---
arch/arm/dts/k3-am62a7-sk.dts | 702 ------------
arch/arm/dts/k3-am62x-sk-common.dtsi | 535 ---------
configs/am62ax_evm_a53_defconfig | 3 +-
configs/am62x_beagleplay_a53_defconfig | 3 +-
configs/am62x_evm_a53_defconfig | 3 +-
22 files changed, 12 insertions(+), 5595 deletions(-)
delete mode 100644 arch/arm/dts/k3-am62-main.dtsi
delete mode 100644 arch/arm/dts/k3-am62-mcu.dtsi
delete mode 100644 arch/arm/dts/k3-am62-thermal.dtsi
delete mode 100644 arch/arm/dts/k3-am62-wakeup.dtsi
delete mode 100644 arch/arm/dts/k3-am62.dtsi
delete mode 100644 arch/arm/dts/k3-am625-beagleplay.dts
delete mode 100644 arch/arm/dts/k3-am625-sk.dts
delete mode 100644 arch/arm/dts/k3-am625.dtsi
delete mode 100644 arch/arm/dts/k3-am62a-main.dtsi
delete mode 100644 arch/arm/dts/k3-am62a-mcu.dtsi
delete mode 100644 arch/arm/dts/k3-am62a-thermal.dtsi
delete mode 100644 arch/arm/dts/k3-am62a-wakeup.dtsi
delete mode 100644 arch/arm/dts/k3-am62a.dtsi
delete mode 100644 arch/arm/dts/k3-am62a7-sk.dts
delete mode 100644 arch/arm/dts/k3-am62x-sk-common.dtsi
[1] https://lore.kernel.org/u-boot/20240604134751.249048-1-nm@ti.com/
base-commit: 227be29df37545f74243a98c12a4a33c4160e3cd
--
2.43.0
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH 1/3] arm: dts: am625_beagleplay: Switch to OF_UPSTREAM
2024-06-05 15:27 [PATCH 0/3] arm: dts: am625/am62a7: Switch over to OF_UPSTREAM Nishanth Menon
@ 2024-06-05 15:27 ` Nishanth Menon
2024-06-06 9:24 ` Mattijs Korpershoek
2024-06-05 15:27 ` [PATCH 2/3] arm: dts: am625_sk: " Nishanth Menon
` (4 subsequent siblings)
5 siblings, 1 reply; 9+ messages in thread
From: Nishanth Menon @ 2024-06-05 15:27 UTC (permalink / raw)
To: Tom Rini
Cc: Dhruva Gole, Bryan Brattlof, Vignesh Raghavendra, Robert Nelson,
u-boot, Nishanth Menon
Enable OF_UPSTREAM for AM625-beagleplay board. Remove DT files that
are now available in dts/upstream. Update the appended files based on
version of latest OF_UPSTREAM sync point (v6.10-rc1).
Signed-off-by: Nishanth Menon <nm@ti.com>
---
arch/arm/dts/Makefile | 1 -
arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi | 4 +-
arch/arm/dts/k3-am625-beagleplay.dts | 932 -------------------
configs/am62x_beagleplay_a53_defconfig | 3 +-
4 files changed, 4 insertions(+), 936 deletions(-)
delete mode 100644 arch/arm/dts/k3-am625-beagleplay.dts
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 624dadf8ece2..813426a3e519 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -1200,7 +1200,6 @@ dtb-$(CONFIG_SOC_K3_AM642) += k3-am642-r5-evm.dtb \
dtb-$(CONFIG_SOC_K3_AM625) += k3-am625-sk.dtb \
k3-am625-r5-sk.dtb \
- k3-am625-beagleplay.dtb \
k3-am625-r5-beagleplay.dtb \
k3-am625-verdin-r5.dtb \
k3-am625-r5-phycore-som-2gb.dtb
diff --git a/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi b/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi
index 9ac4a825f841..dd5b335ed2ee 100644
--- a/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi
+++ b/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi
@@ -66,9 +66,9 @@
#ifdef CONFIG_TARGET_AM625_A53_BEAGLEPLAY
#define SPL_NODTB "spl/u-boot-spl-nodtb.bin"
-#define SPL_AM625_BEAGLEPLAY_DTB "spl/dts/k3-am625-beagleplay.dtb"
+#define SPL_AM625_BEAGLEPLAY_DTB "spl/dts/ti/k3-am625-beagleplay.dtb"
#define UBOOT_NODTB "u-boot-nodtb.bin"
-#define AM625_BEAGLEPLAY_DTB "arch/arm/dts/k3-am625-beagleplay.dtb"
+#define AM625_BEAGLEPLAY_DTB "dts/upstream/src/arm64/ti/k3-am625-beagleplay.dtb"
&binman {
ti-dm {
diff --git a/arch/arm/dts/k3-am625-beagleplay.dts b/arch/arm/dts/k3-am625-beagleplay.dts
deleted file mode 100644
index 8ab838f1697c..000000000000
--- a/arch/arm/dts/k3-am625-beagleplay.dts
+++ /dev/null
@@ -1,932 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only OR MIT
-/*
- * https://beagleplay.org/
- *
- * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/
- * Copyright (C) 2022-2024 Robert Nelson, BeagleBoard.org Foundation
- */
-
-/dts-v1/;
-
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "k3-am625.dtsi"
-
-/ {
- compatible = "beagle,am625-beagleplay", "ti,am625";
- model = "BeagleBoard.org BeaglePlay";
-
- aliases {
- ethernet0 = &cpsw_port1;
- ethernet1 = &cpsw_port2;
- gpio0 = &main_gpio0;
- gpio1 = &main_gpio1;
- gpio2 = &mcu_gpio0;
- i2c0 = &main_i2c0;
- i2c1 = &main_i2c1;
- i2c2 = &main_i2c2;
- i2c3 = &main_i2c3;
- i2c4 = &wkup_i2c0;
- i2c5 = &mcu_i2c0;
- mmc0 = &sdhci0;
- mmc1 = &sdhci1;
- mmc2 = &sdhci2;
- rtc0 = &rtc;
- serial0 = &main_uart5;
- serial1 = &main_uart6;
- serial2 = &main_uart0;
- usb0 = &usb0;
- usb1 = &usb1;
- };
-
- chosen {
- stdout-path = "serial2:115200n8";
- };
-
- memory@80000000 {
- bootph-pre-ram;
- device_type = "memory";
- /* 2G RAM */
- reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
- };
-
- reserved-memory {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- ramoops: ramoops@9ca00000 {
- compatible = "ramoops";
- reg = <0x00 0x9ca00000 0x00 0x00100000>;
- record-size = <0x8000>;
- console-size = <0x8000>;
- ftrace-size = <0x00>;
- pmsg-size = <0x8000>;
- };
-
- secure_tfa_ddr: tfa@9e780000 {
- reg = <0x00 0x9e780000 0x00 0x80000>;
- no-map;
- };
-
- secure_ddr: optee@9e800000 {
- reg = <0x00 0x9e800000 0x00 0x01800000>;
- no-map;
- };
-
- wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9db00000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0x9db00000 0x00 0xc00000>;
- no-map;
- };
- };
-
- vsys_5v0: regulator-1 {
- bootph-all;
- compatible = "regulator-fixed";
- regulator-name = "vsys_5v0";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- vdd_3v3: regulator-2 {
- /* output of TLV62595DMQR-U12 */
- bootph-all;
- compatible = "regulator-fixed";
- regulator-name = "vdd_3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vsys_5v0>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- wlan_en: regulator-3 {
- /* OUTPUT of SN74AVC2T244DQMR */
- compatible = "regulator-fixed";
- regulator-name = "wlan_en";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- enable-active-high;
- regulator-always-on;
- vin-supply = <&vdd_3v3>;
- gpio = <&main_gpio0 38 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&wifi_en_pins_default>;
- };
-
- vdd_3v3_sd: regulator-4 {
- /* output of TPS22918DBVR-U21 */
- bootph-all;
- pinctrl-names = "default";
- pinctrl-0 = <&vdd_3v3_sd_pins_default>;
-
- compatible = "regulator-fixed";
- regulator-name = "vdd_3v3_sd";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- enable-active-high;
- regulator-always-on;
- vin-supply = <&vdd_3v3>;
- gpio = <&main_gpio1 19 GPIO_ACTIVE_HIGH>;
- };
-
- vdd_sd_dv: regulator-5 {
- bootph-all;
- compatible = "regulator-gpio";
- regulator-name = "sd_hs200_switch";
- pinctrl-names = "default";
- pinctrl-0 = <&vdd_sd_dv_pins_default>;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- vin-supply = <&ldo1_reg>;
- gpios = <&main_gpio1 49 GPIO_ACTIVE_HIGH>;
- states = <1800000 0x0>,
- <3300000 0x1>;
- };
-
- leds {
- bootph-all;
- compatible = "gpio-leds";
-
- led-0 {
- bootph-all;
- gpios = <&main_gpio0 3 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "heartbeat";
- function = LED_FUNCTION_HEARTBEAT;
- default-state = "off";
- };
-
- led-1 {
- bootph-all;
- gpios = <&main_gpio0 4 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "disk-activity";
- function = LED_FUNCTION_DISK_ACTIVITY;
- default-state = "keep";
- };
-
- led-2 {
- bootph-all;
- gpios = <&main_gpio0 5 GPIO_ACTIVE_HIGH>;
- function = LED_FUNCTION_CPU;
- };
-
- led-3 {
- bootph-all;
- gpios = <&main_gpio0 6 GPIO_ACTIVE_HIGH>;
- function = LED_FUNCTION_LAN;
- };
-
- led-4 {
- bootph-all;
- gpios = <&main_gpio0 9 GPIO_ACTIVE_HIGH>;
- function = LED_FUNCTION_WLAN;
- };
- };
-
- gpio_keys: gpio-keys {
- compatible = "gpio-keys";
- autorepeat;
- pinctrl-names = "default";
- pinctrl-0 = <&usr_button_pins_default>;
-
- usr: button-usr {
- label = "User Key";
- linux,code = <BTN_0>;
- gpios = <&main_gpio0 18 GPIO_ACTIVE_LOW>;
- };
-
- };
-
- hdmi0: connector-hdmi {
- compatible = "hdmi-connector";
- label = "hdmi";
- type = "a";
- port {
- hdmi_connector_in: endpoint {
- remote-endpoint = <&it66121_out>;
- };
- };
- };
-
- sound {
- compatible = "simple-audio-card";
- simple-audio-card,name = "it66121 HDMI";
- simple-audio-card,format = "i2s";
- simple-audio-card,bitclock-master = <&hdmi_dailink_master>;
- simple-audio-card,frame-master = <&hdmi_dailink_master>;
-
- hdmi_dailink_master: simple-audio-card,cpu {
- sound-dai = <&mcasp1>;
- system-clock-direction-out;
- };
-
- simple-audio-card,codec {
- sound-dai = <&it66121>;
- };
- };
-
-};
-
-&main_pmx0 {
- gpio0_pins_default: gpio0-default-pins {
- bootph-all;
- pinctrl-single,pins = <
- AM62X_IOPAD(0x0004, PIN_INPUT, 7) /* (G25) OSPI0_LBCLKO.GPIO0_1 */
- AM62X_IOPAD(0x0008, PIN_INPUT, 7) /* (J24) OSPI0_DQS.GPIO0_2 */
- AM62X_IOPAD(0x000c, PIN_INPUT, 7) /* (E25) OSPI0_D0.GPIO0_3 */
- AM62X_IOPAD(0x0010, PIN_INPUT, 7) /* (G24) OSPI0_D1.GPIO0_4 */
- AM62X_IOPAD(0x0014, PIN_INPUT, 7) /* (F25) OSPI0_D2.GPIO0_5 */
- AM62X_IOPAD(0x0018, PIN_INPUT, 7) /* (F24) OSPI0_D3.GPIO0_6 */
- AM62X_IOPAD(0x0024, PIN_INPUT, 7) /* (H25) OSPI0_D6.GPIO0_9 */
- AM62X_IOPAD(0x0028, PIN_INPUT, 7) /* (J22) OSPI0_D7.GPIO0_10 */
- AM62X_IOPAD(0x002c, PIN_INPUT, 7) /* (F23) OSPI0_CSn0.GPIO0_11 */
- AM62X_IOPAD(0x0030, PIN_INPUT, 7) /* (G21) OSPI0_CSn1.GPIO0_12 */
- AM62X_IOPAD(0x0034, PIN_INPUT, 7) /* (H21) OSPI0_CSn2.GPIO0_13 */
- AM62X_IOPAD(0x0038, PIN_INPUT, 7) /* (E24) OSPI0_CSn3.GPIO0_14 */
- AM62X_IOPAD(0x00a4, PIN_INPUT, 7) /* (M22) GPMC0_DIR.GPIO0_40 */
- AM62X_IOPAD(0x00ac, PIN_INPUT, 7) /* (L21) GPMC0_CSn1.GPIO0_42 */
- >;
- };
-
- vdd_sd_dv_pins_default: vdd-sd-default-pins {
- bootph-all;
- pinctrl-single,pins = <
- AM62X_IOPAD(0x0244, PIN_OUTPUT, 7) /* (C17) MMC1_SDWP.GPIO1_49 */
- >;
- };
-
- usr_button_pins_default: usr-button-default-pins {
- pinctrl-single,pins = <
- AM62X_IOPAD(0x0048, PIN_INPUT, 7) /* (N25) GPMC0_AD3.GPIO0_18 */
- >;
- };
-
- grove_pins_default: grove-default-pins {
- pinctrl-single,pins = <
- AM62X_IOPAD(0x01e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */
- AM62X_IOPAD(0x01ec, PIN_INPUT_PULLUP, 0) /* (A17) I2C1_SDA */
- >;
- };
-
- local_i2c_pins_default: local-i2c-default-pins {
- bootph-all;
- pinctrl-single,pins = <
- AM62X_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (B16) I2C0_SCL */
- AM62X_IOPAD(0x01e4, PIN_INPUT_PULLUP, 0) /* (A16) I2C0_SDA */
- >;
- };
-
- i2c2_1v8_pins_default: i2c2-default-pins {
- pinctrl-single,pins = <
- AM62X_IOPAD(0x00b0, PIN_INPUT_PULLUP, 1) /* (K22) GPMC0_CSn2.I2C2_SCL */
- AM62X_IOPAD(0x00b4, PIN_INPUT_PULLUP, 1) /* (K24) GPMC0_CSn3.I2C2_SDA */
- >;
- };
-
- mdio0_pins_default: mdio0-default-pins {
- pinctrl-single,pins = <
- AM62X_IOPAD(0x0160, PIN_OUTPUT, 0) /* (AD24) MDIO0_MDC */
- AM62X_IOPAD(0x015c, PIN_INPUT, 0) /* (AB22) MDIO0_MDIO */
- AM62X_IOPAD(0x003c, PIN_INPUT, 7) /* (M25) GPMC0_AD0.GPIO0_15 */
- AM62X_IOPAD(0x018c, PIN_INPUT, 7) /* (AC21) RGMII2_RD2.GPIO1_5 */
- >;
- };
-
- rgmii1_pins_default: rgmii1-default-pins {
- pinctrl-single,pins = <
- AM62X_IOPAD(0x014c, PIN_INPUT, 0) /* (AB17) RGMII1_RD0 */
- AM62X_IOPAD(0x0150, PIN_INPUT, 0) /* (AC17) RGMII1_RD1 */
- AM62X_IOPAD(0x0154, PIN_INPUT, 0) /* (AB16) RGMII1_RD2 */
- AM62X_IOPAD(0x0158, PIN_INPUT, 0) /* (AA15) RGMII1_RD3 */
- AM62X_IOPAD(0x0148, PIN_INPUT, 0) /* (AD17) RGMII1_RXC */
- AM62X_IOPAD(0x0144, PIN_INPUT, 0) /* (AE17) RGMII1_RX_CTL */
- AM62X_IOPAD(0x0134, PIN_OUTPUT, 0) /* (AE20) RGMII1_TD0 */
- AM62X_IOPAD(0x0138, PIN_OUTPUT, 0) /* (AD20) RGMII1_TD1 */
- AM62X_IOPAD(0x013c, PIN_OUTPUT, 0) /* (AE18) RGMII1_TD2 */
- AM62X_IOPAD(0x0140, PIN_OUTPUT, 0) /* (AD18) RGMII1_TD3 */
- AM62X_IOPAD(0x0130, PIN_OUTPUT, 0) /* (AE19) RGMII1_TXC */
- AM62X_IOPAD(0x012c, PIN_OUTPUT, 0) /* (AD19) RGMII1_TX_CTL */
- >;
- };
-
- emmc_pins_default: emmc-default-pins {
- bootph-all;
- pinctrl-single,pins = <
- AM62X_IOPAD(0x0220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */
- AM62X_IOPAD(0x0218, PIN_INPUT, 0) /* (AB1) MMC0_CLK */
- AM62X_IOPAD(0x0214, PIN_INPUT, 0) /* (AA2) MMC0_DAT0 */
- AM62X_IOPAD(0x0210, PIN_INPUT, 0) /* (AA1) MMC0_DAT1 */
- AM62X_IOPAD(0x020c, PIN_INPUT, 0) /* (AA3) MMC0_DAT2 */
- AM62X_IOPAD(0x0208, PIN_INPUT, 0) /* (Y4) MMC0_DAT3 */
- AM62X_IOPAD(0x0204, PIN_INPUT, 0) /* (AB2) MMC0_DAT4 */
- AM62X_IOPAD(0x0200, PIN_INPUT, 0) /* (AC1) MMC0_DAT5 */
- AM62X_IOPAD(0x01fc, PIN_INPUT, 0) /* (AD2) MMC0_DAT6 */
- AM62X_IOPAD(0x01f8, PIN_INPUT, 0) /* (AC2) MMC0_DAT7 */
- >;
- };
-
- vdd_3v3_sd_pins_default: vdd-3v3-sd-default-pins {
- bootph-all;
- pinctrl-single,pins = <
- AM62X_IOPAD(0x01c4, PIN_INPUT, 7) /* (B14) SPI0_D1_GPIO1_19 */
- >;
- };
-
- sd_pins_default: sd-default-pins {
- bootph-all;
- pinctrl-single,pins = <
- AM62X_IOPAD(0x023c, PIN_INPUT, 0) /* (A21) MMC1_CMD */
- AM62X_IOPAD(0x0234, PIN_INPUT, 0) /* (B22) MMC1_CLK */
- AM62X_IOPAD(0x0230, PIN_INPUT, 0) /* (A22) MMC1_DAT0 */
- AM62X_IOPAD(0x022c, PIN_INPUT, 0) /* (B21) MMC1_DAT1 */
- AM62X_IOPAD(0x0228, PIN_INPUT, 0) /* (C21) MMC1_DAT2 */
- AM62X_IOPAD(0x0224, PIN_INPUT, 0) /* (D22) MMC1_DAT3 */
- AM62X_IOPAD(0x0240, PIN_INPUT, 7) /* (D17) MMC1_SDCD.GPIO1_48 */
- >;
- };
-
- wifi_pins_default: wifi-default-pins {
- pinctrl-single,pins = <
- AM62X_IOPAD(0x0120, PIN_INPUT, 0) /* (C24) MMC2_CMD */
- AM62X_IOPAD(0x0118, PIN_INPUT, 0) /* (D25) MMC2_CLK */
- AM62X_IOPAD(0x0114, PIN_INPUT, 0) /* (B24) MMC2_DAT0 */
- AM62X_IOPAD(0x0110, PIN_INPUT, 0) /* (C25) MMC2_DAT1 */
- AM62X_IOPAD(0x010c, PIN_INPUT, 0) /* (E23) MMC2_DAT2 */
- AM62X_IOPAD(0x0108, PIN_INPUT, 0) /* (D24) MMC2_DAT3 */
- AM62X_IOPAD(0x0124, PIN_INPUT, 0) /* (A23) MMC2_SDCD */
- AM62X_IOPAD(0x11c, PIN_INPUT, 0) /* (#N/A) MMC2_CLKB */
- >;
- };
-
- wifi_en_pins_default: wifi-en-default-pins {
- pinctrl-single,pins = <
- AM62X_IOPAD(0x009c, PIN_OUTPUT, 7) /* (V25) GPMC0_WAIT1.GPIO0_38 */
- >;
- };
-
- wifi_wlirq_pins_default: wifi-wlirq-default-pins {
- pinctrl-single,pins = <
- AM62X_IOPAD(0x00a8, PIN_INPUT, 7) /* (M21) GPMC0_CSn0.GPIO0_41 */
- >;
- };
-
- spe_pins_default: spe-default-pins {
- pinctrl-single,pins = <
- AM62X_IOPAD(0x0168, PIN_INPUT, 1) /* (AE21) RGMII2_TXC.RMII2_CRS_DV */
- AM62X_IOPAD(0x0180, PIN_INPUT, 1) /* (AD23) RGMII2_RXC.RMII2_REF_CLK */
- AM62X_IOPAD(0x0184, PIN_INPUT, 1) /* (AE23) RGMII2_RD0.RMII2_RXD0 */
- AM62X_IOPAD(0x0188, PIN_INPUT, 1) /* (AB20) RGMII2_RD1.RMII2_RXD1 */
- AM62X_IOPAD(0x017c, PIN_INPUT, 1) /* (AD22) RGMII2_RX_CTL.RMII2_RX_ER */
- AM62X_IOPAD(0x016c, PIN_INPUT, 1) /* (Y18) RGMII2_TD0.RMII2_TXD0 */
- AM62X_IOPAD(0x0170, PIN_INPUT, 1) /* (AA18) RGMII2_TD1.RMII2_TXD1 */
- AM62X_IOPAD(0x0164, PIN_INPUT, 1) /* (AA19) RGMII2_TX_CTL.RMII2_TX_EN */
- AM62X_IOPAD(0x0190, PIN_INPUT, 7) /* (AE22) RGMII2_RD3.GPIO1_6 */
- AM62X_IOPAD(0x01f0, PIN_OUTPUT, 5) /* (A18) EXT_REFCLK1.CLKOUT0 */
- >;
- };
-
- mikrobus_i2c_pins_default: mikrobus-i2c-default-pins {
- pinctrl-single,pins = <
- AM62X_IOPAD(0x01d0, PIN_INPUT_PULLUP, 2) /* (A15) UART0_CTSn.I2C3_SCL */
- AM62X_IOPAD(0x01d4, PIN_INPUT_PULLUP, 2) /* (B15) UART0_RTSn.I2C3_SDA */
- >;
- };
-
- mikrobus_uart_pins_default: mikrobus-uart-default-pins {
- pinctrl-single,pins = <
- AM62X_IOPAD(0x01d8, PIN_INPUT, 1) /* (C15) MCAN0_TX.UART5_RXD */
- AM62X_IOPAD(0x01dc, PIN_OUTPUT, 1) /* (E15) MCAN0_RX.UART5_TXD */
- >;
- };
-
- mikrobus_spi_pins_default: mikrobus-spi-default-pins {
- pinctrl-single,pins = <
- AM62X_IOPAD(0x01b0, PIN_INPUT, 1) /* (A20) MCASP0_ACLKR.SPI2_CLK */
- AM62X_IOPAD(0x01ac, PIN_INPUT, 1) /* (E19) MCASP0_AFSR.SPI2_CS0 */
- AM62X_IOPAD(0x0194, PIN_INPUT, 1) /* (B19) MCASP0_AXR3.SPI2_D0 */
- AM62X_IOPAD(0x0198, PIN_INPUT, 1) /* (A19) MCASP0_AXR2.SPI2_D1 */
- >;
- };
-
- mikrobus_gpio_pins_default: mikrobus-gpio-default-pins {
- bootph-all;
- pinctrl-single,pins = <
- AM62X_IOPAD(0x019c, PIN_INPUT, 7) /* (B18) MCASP0_AXR1.GPIO1_9 */
- AM62X_IOPAD(0x01a0, PIN_INPUT, 7) /* (E18) MCASP0_AXR0.GPIO1_10 */
- AM62X_IOPAD(0x01a8, PIN_INPUT, 7) /* (D20) MCASP0_AFSX.GPIO1_12 */
- >;
- };
-
- main_uart0_pins_default: main-uart0-default-pins {
- bootph-all;
- pinctrl-single,pins = <
- AM62X_IOPAD(0x01c8, PIN_INPUT, 0) /* (D14) UART0_RXD */
- AM62X_IOPAD(0x01cc, PIN_OUTPUT, 0) /* (E14) UART0_TXD */
- >;
- };
-
- wifi_debug_uart_pins_default: wifi-debug-uart-default-pins {
- pinctrl-single,pins = <
- AM62X_IOPAD(0x001c, PIN_INPUT, 3) /* (J23) OSPI0_D4.UART6_RXD */
- AM62X_IOPAD(0x0020, PIN_OUTPUT, 3) /* (J25) OSPI0_D5.UART6_TXD */
- >;
- };
-
- usb1_pins_default: usb1-default-pins {
- pinctrl-single,pins = <
- AM62X_IOPAD(0x0258, PIN_INPUT, 0) /* (F18) USB1_DRVVBUS */
- >;
- };
-
- pmic_irq_pins_default: pmic-irq-default-pins {
- pinctrl-single,pins = <
- AM62X_IOPAD(0x01f4, PIN_INPUT_PULLUP, 0) /* (D16) EXTINTn */
- >;
- };
-
- hdmi_gpio_pins_default: hdmi-gpio-default-pins {
- pinctrl-single,pins = <
- AM62X_IOPAD(0x0094, PIN_INPUT_PULLUP | PIN_DEBOUNCE_CONF6, 7) /* (N20) GPMC0_BE1n.GPIO0_36 */
- AM62X_IOPAD(0x0054, PIN_OUTPUT_PULLUP, 7) /* (P21) GPMC0_AD6.GPIO0_21 */
- >;
- };
-
- mcasp_hdmi_pins_default: mcasp-hdmi-default-pins {
- pinctrl-single,pins = <
- AM62X_IOPAD(0x0090, PIN_INPUT, 2) /* (M24) GPMC0_BE0n_CLE.MCASP1_ACLKX */
- AM62X_IOPAD(0x0098, PIN_INPUT, 2) /* (U23) GPMC0_WAIT0.MCASP1_AFSX */
- AM62X_IOPAD(0x008c, PIN_OUTPUT, 2) /* (L25) GPMC0_WEn.MCASP1_AXR0 */
- AM62X_IOPAD(0x0088, PIN_INPUT, 2) /* (L24) GPMC0_OEn_REn.MCASP1_AXR1 */
- AM62X_IOPAD(0x0084, PIN_INPUT, 2) /* (L23) GPMC0_ADVn_ALE.MCASP1_AXR2 */
- AM62X_IOPAD(0x007c, PIN_INPUT, 2) /* (P25) GPMC0_CLK.MCASP1_AXR3 */
- >;
- };
-
- dss0_pins_default: dss0-default-pins {
- pinctrl-single,pins = <
- AM62X_IOPAD(0x0100, PIN_OUTPUT, 0) /* (AC25) VOUT0_VSYNC */
- AM62X_IOPAD(0x00f8, PIN_OUTPUT, 0) /* (AB24) VOUT0_HSYNC */
- AM62X_IOPAD(0x0104, PIN_OUTPUT, 0) /* (AC24) VOUT0_PCLK */
- AM62X_IOPAD(0x00fc, PIN_OUTPUT, 0) /* (Y20) VOUT0_DE */
- AM62X_IOPAD(0x00b8, PIN_OUTPUT, 0) /* (U22) VOUT0_DATA0 */
- AM62X_IOPAD(0x00bc, PIN_OUTPUT, 0) /* (V24) VOUT0_DATA1 */
- AM62X_IOPAD(0x00c0, PIN_OUTPUT, 0) /* (W25) VOUT0_DATA2 */
- AM62X_IOPAD(0x00c4, PIN_OUTPUT, 0) /* (W24) VOUT0_DATA3 */
- AM62X_IOPAD(0x00c8, PIN_OUTPUT, 0) /* (Y25) VOUT0_DATA4 */
- AM62X_IOPAD(0x00cc, PIN_OUTPUT, 0) /* (Y24) VOUT0_DATA5 */
- AM62X_IOPAD(0x00d0, PIN_OUTPUT, 0) /* (Y23) VOUT0_DATA6 */
- AM62X_IOPAD(0x00d4, PIN_OUTPUT, 0) /* (AA25) VOUT0_DATA7 */
- AM62X_IOPAD(0x00d8, PIN_OUTPUT, 0) /* (V21) VOUT0_DATA8 */
- AM62X_IOPAD(0x00dc, PIN_OUTPUT, 0) /* (W21) VOUT0_DATA9 */
- AM62X_IOPAD(0x00e0, PIN_OUTPUT, 0) /* (V20) VOUT0_DATA10 */
- AM62X_IOPAD(0x00e4, PIN_OUTPUT, 0) /* (AA23) VOUT0_DATA11 */
- AM62X_IOPAD(0x00e8, PIN_OUTPUT, 0) /* (AB25) VOUT0_DATA12 */
- AM62X_IOPAD(0x00ec, PIN_OUTPUT, 0) /* (AA24) VOUT0_DATA13 */
- AM62X_IOPAD(0x00f0, PIN_OUTPUT, 0) /* (Y22) VOUT0_DATA14 */
- AM62X_IOPAD(0x00f4, PIN_OUTPUT, 0) /* (AA21) VOUT0_DATA15 */
- AM62X_IOPAD(0x005c, PIN_OUTPUT, 1) /* (R24) GPMC0_AD8.VOUT0_DATA16 */
- AM62X_IOPAD(0x0060, PIN_OUTPUT, 1) /* (R25) GPMC0_AD9.VOUT0_DATA17 */
- AM62X_IOPAD(0x0064, PIN_OUTPUT, 1) /* (T25) GPMC0_AD10.VOUT0_DATA18 */
- AM62X_IOPAD(0x0068, PIN_OUTPUT, 1) /* (R21) GPMC0_AD11.VOUT0_DATA19 */
- AM62X_IOPAD(0x006c, PIN_OUTPUT, 1) /* (T22) GPMC0_AD12.VOUT0_DATA20 */
- AM62X_IOPAD(0x0070, PIN_OUTPUT, 1) /* (T24) GPMC0_AD13.VOUT0_DATA21 */
- AM62X_IOPAD(0x0074, PIN_OUTPUT, 1) /* (U25) GPMC0_AD14.VOUT0_DATA22 */
- AM62X_IOPAD(0x0078, PIN_OUTPUT, 1) /* (U24) GPMC0_AD15.VOUT0_DATA23 */
- >;
- };
-};
-
-&mcu_pmx0 {
- i2c_qwiic_pins_default: i2c-qwiic-default-pins {
- pinctrl-single,pins = <
- AM62X_MCU_IOPAD(0x0044, PIN_INPUT, 0) /* (A8) MCU_I2C0_SCL */
- AM62X_MCU_IOPAD(0x0048, PIN_INPUT, 0) /* (D10) MCU_I2C0_SDA */
- >;
- };
-
- gbe_pmx_obsclk: gbe-pmx-obsclk-default-pins {
- pinctrl-single,pins = <
- AM62X_MCU_IOPAD(0x0004, PIN_OUTPUT, 1) /* (B8) MCU_SPI0_CS1.MCU_OBSCLK0 */
- >;
- };
-
- i2c_csi_pins_default: i2c-csi-default-pins {
- pinctrl-single,pins = <
- AM62X_MCU_IOPAD(0x004c, PIN_INPUT_PULLUP, 0) /* (B9) WKUP_I2C0_SCL */
- AM62X_MCU_IOPAD(0x0050, PIN_INPUT_PULLUP, 0) /* (A9) WKUP_I2C0_SDA */
- >;
- };
-
- wifi_32k_clk: mcu-clk-out-default-pins {
- pinctrl-single,pins = <
- AM62X_MCU_IOPAD(0x0084, PIN_OUTPUT, 0) /* (A12) WKUP_CLKOUT0 */
- >;
- };
-};
-
-&a53_opp_table {
- /* Requires VDD_CORE to be at 0.85V */
- opp-1400000000 {
- opp-hz = /bits/ 64 <1400000000>;
- opp-supported-hw = <0x01 0x0004>;
- };
-};
-
-&wkup_i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c_csi_pins_default>;
- clock-frequency = <400000>;
- /* Enable with overlay for camera sensor */
-};
-
-&mcu_i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c_qwiic_pins_default>;
- clock-frequency = <100000>;
- status = "okay";
-};
-
-&usbss0 {
- bootph-all;
- ti,vbus-divider;
- status = "okay";
-};
-
-&usb0 {
- bootph-all;
- dr_mode = "peripheral";
-};
-
-&usbss1 {
- ti,vbus-divider;
- status = "okay";
-};
-
-&usb1 {
- dr_mode = "host";
- pinctrl-names = "default";
- pinctrl-0 = <&usb1_pins_default>;
-};
-
-&cpsw3g {
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii1_pins_default>, <&spe_pins_default>,
- <&gbe_pmx_obsclk>;
- assigned-clocks = <&k3_clks 157 70>, <&k3_clks 157 20>;
- assigned-clock-parents = <&k3_clks 157 72>, <&k3_clks 157 22>;
-};
-
-&cpsw_port1 {
- phy-mode = "rgmii-rxid";
- phy-handle = <&cpsw3g_phy0>;
-};
-
-&cpsw_port2 {
- phy-mode = "rmii";
- phy-handle = <&cpsw3g_phy1>;
-};
-
-&cpsw3g_mdio {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&mdio0_pins_default>;
-
- cpsw3g_phy0: ethernet-phy@0 {
- reg = <0>;
- reset-gpios = <&main_gpio0 15 GPIO_ACTIVE_LOW>;
- reset-assert-us = <10000>;
- reset-deassert-us = <50000>;
- };
-
- cpsw3g_phy1: ethernet-phy@1 {
- reg = <1>;
- reset-gpios = <&main_gpio1 5 GPIO_ACTIVE_LOW>;
- reset-assert-us = <25>;
- reset-deassert-us = <60000>; /* T2 */
- };
-};
-
-&main_gpio0 {
- bootph-all;
- pinctrl-names = "default";
- pinctrl-0 = <&gpio0_pins_default>;
- gpio-line-names = "BL_EN_3V3", "SPE_PO_EN", "RTC_INT", /* 0-2 */
- "USR0", "USR1", "USR2", "USR3", "", "", "USR4", /* 3-9 */
- "EEPROM_WP", /* 10 */
- "CSI2_CAMERA_GPIO1", "CSI2_CAMERA_GPIO2", /* 11-12 */
- "CC1352P7_BOOT", "CC1352P7_RSTN", "GBE_RSTN", "", "", /* 13-17 */
- "USR_BUTTON", "", "", "", "", "", "", "", "", /* 18-26 */
- "", "", "", "", "", "", "", "", "", "HDMI_INT", /* 27-36 */
- "", "VDD_WLAN_EN", "", "", "WL_IRQ", "GBE_INTN",/* 37-42 */
- "", "", "", "", "", "", "", "", "", "", "", "", /* 43-54 */
- "", "", "", "", "", "", "", "", "", "", "", "", /* 55-66 */
- "", "", "", "", "", "", "", "", "", "", "", "", /* 67-78 */
- "", "", "", "", "", "", /* 79-84 */
- "BITBANG_MDIO_DATA", "BITBANG_MDIO_CLK", /* 85-86 */
- "", "", "", "", ""; /* 87-91 */
-};
-
-&main_gpio1 {
- bootph-all;
- pinctrl-names = "default";
- pinctrl-0 = <&mikrobus_gpio_pins_default>;
- gpio-line-names = "", "", "", "", "", /* 0-4 */
- "SPE_RSTN", "SPE_INTN", "MIKROBUS_GPIO1_7", /* 5-7 */
- "MIKROBUS_GPIO1_8", "MIKROBUS_GPIO1_9", /* 8-9 */
- "MIKROBUS_GPIO1_10", "MIKROBUS_GPIO1_11", /* 10-11 */
- "MIKROBUS_GPIO1_12", "MIKROBUS_W1_GPIO0", /* 12-13 */
- "MIKROBUS_GPIO1_14", /* 14 */
- "", "", "", "", "VDD_3V3_SD", "", "", /* 15-21 */
- "MIKROBUS_GPIO1_22", "MIKROBUS_GPIO1_23", /* 22-23 */
- "MIKROBUS_GPIO1_24", "MIKROBUS_GPIO1_25", /* 24-25 */
- "", "", "", "", "", "", "", "", "", "", "", "", /* 26-37 */
- "", "", "", "", "", "", "", "", "", "", /* 38-47 */
- "SD_CD", "SD_VOLT_SEL", "", ""; /* 48-51 */
-};
-
-&main_i2c0 {
- bootph-all;
- pinctrl-names = "default";
- pinctrl-0 = <&local_i2c_pins_default>;
- clock-frequency = <400000>;
- status = "okay";
-
- eeprom@50 {
- compatible = "atmel,24c32";
- reg = <0x50>;
- };
-
- rtc: rtc@68 {
- compatible = "ti,bq32000";
- reg = <0x68>;
- interrupt-parent = <&main_gpio0>;
- interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
- };
-
- tps65219: pmic@30 {
- bootph-all;
- compatible = "ti,tps65219";
- reg = <0x30>;
- buck1-supply = <&vsys_5v0>;
- buck2-supply = <&vsys_5v0>;
- buck3-supply = <&vsys_5v0>;
- ldo1-supply = <&vdd_3v3>;
- ldo2-supply = <&buck2_reg>;
- ldo3-supply = <&vdd_3v3>;
- ldo4-supply = <&vdd_3v3>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_irq_pins_default>;
- interrupt-parent = <&gic500>;
- interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-controller;
- #interrupt-cells = <1>;
-
- system-power-controller;
- ti,power-button;
-
- regulators {
- buck1_reg: buck1 {
- regulator-name = "VDD_CORE";
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <850000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- buck2_reg: buck2 {
- regulator-name = "VDD_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- buck3_reg: buck3 {
- regulator-name = "VDD_1V2";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo1_reg: ldo1 {
- /*
- * Regulator is left as is unused, vdd_sd
- * is controlled via GPIO with bypass config
- * as per the NVM configuration
- */
- regulator-name = "VDD_SD_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-allow-bypass;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo2_reg: ldo2 {
- regulator-name = "VDDA_0V85";
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <850000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo3_reg: ldo3 {
- regulator-name = "VDDA_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo4_reg: ldo4 {
- regulator-name = "VDD_2V5";
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <2500000>;
- regulator-boot-on;
- regulator-always-on;
- };
- };
- };
-};
-
-&main_i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&grove_pins_default>;
- clock-frequency = <100000>;
- status = "okay";
-};
-
-&main_i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_1v8_pins_default>;
- clock-frequency = <100000>;
- status = "okay";
-
- it66121: bridge-hdmi@4c {
- compatible = "ite,it66121";
- reg = <0x4c>;
- pinctrl-names = "default";
- pinctrl-0 = <&hdmi_gpio_pins_default>;
- vcn33-supply = <&vdd_3v3>;
- vcn18-supply = <&buck2_reg>;
- vrf12-supply = <&buck3_reg>;
- reset-gpios = <&main_gpio0 21 GPIO_ACTIVE_LOW>;
- interrupt-parent = <&main_gpio0>;
- interrupts = <36 IRQ_TYPE_EDGE_FALLING>;
- #sound-dai-cells = <0>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
-
- it66121_in: endpoint {
- bus-width = <24>;
- remote-endpoint = <&dpi1_out>;
- };
- };
-
- port@1 {
- reg = <1>;
-
- it66121_out: endpoint {
- remote-endpoint = <&hdmi_connector_in>;
- };
- };
- };
- };
-};
-
-&main_i2c3 {
- pinctrl-names = "default";
- pinctrl-0 = <&mikrobus_i2c_pins_default>;
- clock-frequency = <400000>;
- status = "okay";
-};
-
-&main_spi2 {
- pinctrl-names = "default";
- pinctrl-0 = <&mikrobus_spi_pins_default>;
- status = "okay";
-};
-
-&sdhci0 {
- bootph-all;
- pinctrl-names = "default";
- pinctrl-0 = <&emmc_pins_default>;
- disable-wp;
- status = "okay";
-};
-
-&sdhci1 {
- /* SD/MMC */
- bootph-all;
- pinctrl-names = "default";
- pinctrl-0 = <&sd_pins_default>;
-
- vmmc-supply = <&vdd_3v3_sd>;
- vqmmc-supply = <&vdd_sd_dv>;
- disable-wp;
- cd-gpios = <&main_gpio1 48 GPIO_ACTIVE_LOW>;
- cd-debounce-delay-ms = <100>;
- ti,fails-without-test-cd;
- status = "okay";
-};
-
-&sdhci2 {
- vmmc-supply = <&wlan_en>;
- pinctrl-names = "default";
- pinctrl-0 = <&wifi_pins_default>, <&wifi_32k_clk>;
- non-removable;
- ti,fails-without-test-cd;
- cap-power-off-card;
- keep-power-in-suspend;
- assigned-clocks = <&k3_clks 157 158>;
- assigned-clock-parents = <&k3_clks 157 160>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "okay";
-
- wlcore: wlcore@2 {
- compatible = "ti,wl1807";
- reg = <2>;
- pinctrl-names = "default";
- pinctrl-0 = <&wifi_wlirq_pins_default>;
- interrupt-parent = <&main_gpio0>;
- interrupts = <41 IRQ_TYPE_EDGE_FALLING>;
- };
-};
-
-&main_uart0 {
- bootph-all;
- pinctrl-names = "default";
- pinctrl-0 = <&main_uart0_pins_default>;
- status = "okay";
-};
-
-&main_uart1 {
- /* Main UART1 is used by TIFS firmware */
- status = "reserved";
-};
-
-&main_uart5 {
- pinctrl-names = "default";
- pinctrl-0 = <&mikrobus_uart_pins_default>;
- status = "okay";
-};
-
-&main_uart6 {
- pinctrl-names = "default";
- pinctrl-0 = <&wifi_debug_uart_pins_default>;
- status = "okay";
-
- mcu {
- compatible = "ti,cc1352p7";
- reset-gpios = <&main_gpio0 72 GPIO_ACTIVE_LOW>;
- vdds-supply = <&vdd_3v3>;
- };
-};
-
-&dss {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&dss0_pins_default>;
-};
-
-&dss_ports {
- /* VP2: DPI Output */
- port@1 {
- reg = <1>;
-
- dpi1_out: endpoint {
- remote-endpoint = <&it66121_in>;
- };
- };
-};
-
-&mcasp1 {
- status = "okay";
- #sound-dai-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&mcasp_hdmi_pins_default>;
- auxclk-fs-ratio = <2177>;
- op-mode = <0>; /* MCASP_IIS_MODE */
- tdm-slots = <2>;
- serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
- 1 0 0 0
- 0 0 0 0
- 0 0 0 0
- 0 0 0 0
- >;
- tx-num-evt = <32>;
- rx-num-evt = <32>;
-};
diff --git a/configs/am62x_beagleplay_a53_defconfig b/configs/am62x_beagleplay_a53_defconfig
index ec62670d55d6..455dd86b2fc3 100644
--- a/configs/am62x_beagleplay_a53_defconfig
+++ b/configs/am62x_beagleplay_a53_defconfig
@@ -10,7 +10,7 @@ CONFIG_TARGET_AM625_A53_BEAGLEPLAY=y
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80b80000
CONFIG_DM_GPIO=y
-CONFIG_DEFAULT_DEVICE_TREE="k3-am625-beagleplay"
+CONFIG_DEFAULT_DEVICE_TREE="ti/k3-am625-beagleplay"
CONFIG_SPL_TEXT_BASE=0x80080000
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_DM_RESET=y
@@ -58,6 +58,7 @@ CONFIG_CMD_PMIC=y
CONFIG_CMD_REGULATOR=y
CONFIG_OF_CONTROL=y
CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_UPSTREAM=y
CONFIG_MULTI_DTB_FIT=y
CONFIG_SPL_MULTI_DTB_FIT=y
CONFIG_SPL_MULTI_DTB_FIT_NO_COMPRESSION=y
--
2.43.0
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH 2/3] arm: dts: am625_sk: Switch to OF_UPSTREAM
2024-06-05 15:27 [PATCH 0/3] arm: dts: am625/am62a7: Switch over to OF_UPSTREAM Nishanth Menon
2024-06-05 15:27 ` [PATCH 1/3] arm: dts: am625_beagleplay: Switch " Nishanth Menon
@ 2024-06-05 15:27 ` Nishanth Menon
2024-06-07 7:18 ` Mattijs Korpershoek
2024-06-05 15:27 ` [PATCH 3/3] arm: dts: am62a7_sk: " Nishanth Menon
` (3 subsequent siblings)
5 siblings, 1 reply; 9+ messages in thread
From: Nishanth Menon @ 2024-06-05 15:27 UTC (permalink / raw)
To: Tom Rini
Cc: Dhruva Gole, Bryan Brattlof, Vignesh Raghavendra, Robert Nelson,
u-boot, Nishanth Menon
Enable OF_UPSTREAM for am625-sk board. Remove DT files that
are now available in dts/upstream. Update the appended files based on
version of latest OF_UPSTREAM sync point (v6.10-rc1).
Signed-off-by: Nishanth Menon <nm@ti.com>
---
arch/arm/dts/Makefile | 3 +-
arch/arm/dts/k3-am62-main.dtsi | 1058 --------------------------
arch/arm/dts/k3-am62-mcu.dtsi | 176 -----
arch/arm/dts/k3-am62-thermal.dtsi | 36 -
arch/arm/dts/k3-am62-wakeup.dtsi | 96 ---
arch/arm/dts/k3-am62.dtsi | 122 ---
arch/arm/dts/k3-am625-sk-binman.dtsi | 2 +-
arch/arm/dts/k3-am625-sk.dts | 299 --------
arch/arm/dts/k3-am625.dtsi | 155 ----
arch/arm/dts/k3-am62x-sk-common.dtsi | 535 -------------
configs/am62x_evm_a53_defconfig | 3 +-
11 files changed, 4 insertions(+), 2481 deletions(-)
delete mode 100644 arch/arm/dts/k3-am62-main.dtsi
delete mode 100644 arch/arm/dts/k3-am62-mcu.dtsi
delete mode 100644 arch/arm/dts/k3-am62-thermal.dtsi
delete mode 100644 arch/arm/dts/k3-am62-wakeup.dtsi
delete mode 100644 arch/arm/dts/k3-am62.dtsi
delete mode 100644 arch/arm/dts/k3-am625-sk.dts
delete mode 100644 arch/arm/dts/k3-am625.dtsi
delete mode 100644 arch/arm/dts/k3-am62x-sk-common.dtsi
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 813426a3e519..5b0bcf336924 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -1198,8 +1198,7 @@ dtb-$(CONFIG_SOC_K3_AM642) += k3-am642-r5-evm.dtb \
k3-am642-r5-sk.dtb \
k3-am642-r5-phycore-som-2gb.dtb
-dtb-$(CONFIG_SOC_K3_AM625) += k3-am625-sk.dtb \
- k3-am625-r5-sk.dtb \
+dtb-$(CONFIG_SOC_K3_AM625) += k3-am625-r5-sk.dtb \
k3-am625-r5-beagleplay.dtb \
k3-am625-verdin-r5.dtb \
k3-am625-r5-phycore-som-2gb.dtb
diff --git a/arch/arm/dts/k3-am62-main.dtsi b/arch/arm/dts/k3-am62-main.dtsi
deleted file mode 100644
index e9cffca073ef..000000000000
--- a/arch/arm/dts/k3-am62-main.dtsi
+++ /dev/null
@@ -1,1058 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only OR MIT
-/*
- * Device Tree Source for AM625 SoC Family Main Domain peripherals
- *
- * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-&cbass_main {
- oc_sram: sram@70000000 {
- compatible = "mmio-sram";
- reg = <0x00 0x70000000 0x00 0x10000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x00 0x70000000 0x10000>;
- };
-
- gic500: interrupt-controller@1800000 {
- compatible = "arm,gic-v3";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */
- <0x00 0x01880000 0x00 0xc0000>, /* GICR */
- <0x00 0x01880000 0x00 0xc0000>, /* GICR */
- <0x01 0x00000000 0x00 0x2000>, /* GICC */
- <0x01 0x00010000 0x00 0x1000>, /* GICH */
- <0x01 0x00020000 0x00 0x2000>; /* GICV */
- /*
- * vcpumntirq:
- * virtual CPU interface maintenance interrupt
- */
- interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
-
- gic_its: msi-controller@1820000 {
- compatible = "arm,gic-v3-its";
- reg = <0x00 0x01820000 0x00 0x10000>;
- socionext,synquacer-pre-its = <0x1000000 0x400000>;
- msi-controller;
- #msi-cells = <1>;
- };
- };
-
- main_conf: bus@100000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x00 0x00100000 0x20000>;
-
- phy_gmii_sel: phy@4044 {
- compatible = "ti,am654-phy-gmii-sel";
- reg = <0x4044 0x8>;
- #phy-cells = <1>;
- };
-
- epwm_tbclk: clock-controller@4130 {
- compatible = "ti,am62-epwm-tbclk";
- reg = <0x4130 0x4>;
- #clock-cells = <1>;
- };
-
- audio_refclk0: clock-controller@82e0 {
- compatible = "ti,am62-audio-refclk";
- reg = <0x82e0 0x4>;
- clocks = <&k3_clks 157 0>;
- assigned-clocks = <&k3_clks 157 0>;
- assigned-clock-parents = <&k3_clks 157 8>;
- #clock-cells = <0>;
- };
-
- audio_refclk1: clock-controller@82e4 {
- compatible = "ti,am62-audio-refclk";
- reg = <0x82e4 0x4>;
- clocks = <&k3_clks 157 10>;
- assigned-clocks = <&k3_clks 157 10>;
- assigned-clock-parents = <&k3_clks 157 18>;
- #clock-cells = <0>;
- };
- };
-
- dmss: bus@48000000 {
- bootph-all;
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <2>;
- dma-ranges;
- ranges = <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>;
-
- ti,sci-dev-id = <25>;
-
- secure_proxy_main: mailbox@4d000000 {
- bootph-all;
- compatible = "ti,am654-secure-proxy";
- #mbox-cells = <1>;
- reg-names = "target_data", "rt", "scfg";
- reg = <0x00 0x4d000000 0x00 0x80000>,
- <0x00 0x4a600000 0x00 0x80000>,
- <0x00 0x4a400000 0x00 0x80000>;
- interrupt-names = "rx_012";
- interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- inta_main_dmss: interrupt-controller@48000000 {
- compatible = "ti,sci-inta";
- reg = <0x00 0x48000000 0x00 0x100000>;
- #interrupt-cells = <0>;
- interrupt-controller;
- interrupt-parent = <&gic500>;
- msi-controller;
- ti,sci = <&dmsc>;
- ti,sci-dev-id = <28>;
- ti,interrupt-ranges = <4 68 36>;
- ti,unmapped-event-sources = <&main_bcdma>, <&main_pktdma>;
- };
-
- main_bcdma: dma-controller@485c0100 {
- compatible = "ti,am64-dmss-bcdma";
- reg = <0x00 0x485c0100 0x00 0x100>,
- <0x00 0x4c000000 0x00 0x20000>,
- <0x00 0x4a820000 0x00 0x20000>,
- <0x00 0x4aa40000 0x00 0x20000>,
- <0x00 0x4bc00000 0x00 0x100000>,
- <0x00 0x48600000 0x00 0x8000>,
- <0x00 0x484a4000 0x00 0x2000>,
- <0x00 0x484c2000 0x00 0x2000>,
- <0x00 0x48420000 0x00 0x2000>;
- reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt",
- "ring", "tchan", "rchan", "bchan";
- msi-parent = <&inta_main_dmss>;
- #dma-cells = <3>;
-
- ti,sci = <&dmsc>;
- ti,sci-dev-id = <26>;
- ti,sci-rm-range-bchan = <0x20>; /* BLOCK_COPY_CHAN */
- ti,sci-rm-range-rchan = <0x21>; /* SPLIT_TR_RX_CHAN */
- ti,sci-rm-range-tchan = <0x22>; /* SPLIT_TR_TX_CHAN */
- };
-
- main_pktdma: dma-controller@485c0000 {
- compatible = "ti,am64-dmss-pktdma";
- reg = <0x00 0x485c0000 0x00 0x100>,
- <0x00 0x4a800000 0x00 0x20000>,
- <0x00 0x4aa00000 0x00 0x40000>,
- <0x00 0x4b800000 0x00 0x400000>,
- <0x00 0x485e0000 0x00 0x10000>,
- <0x00 0x484a0000 0x00 0x2000>,
- <0x00 0x484c0000 0x00 0x2000>,
- <0x00 0x48430000 0x00 0x1000>;
- reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt",
- "ring", "tchan", "rchan", "rflow";
- msi-parent = <&inta_main_dmss>;
- #dma-cells = <2>;
-
- ti,sci = <&dmsc>;
- ti,sci-dev-id = <30>;
- ti,sci-rm-range-tchan = <0x23>, /* UNMAPPED_TX_CHAN */
- <0x24>, /* CPSW_TX_CHAN */
- <0x25>, /* SAUL_TX_0_CHAN */
- <0x26>; /* SAUL_TX_1_CHAN */
- ti,sci-rm-range-tflow = <0x10>, /* RING_UNMAPPED_TX_CHAN */
- <0x11>, /* RING_CPSW_TX_CHAN */
- <0x12>, /* RING_SAUL_TX_0_CHAN */
- <0x13>; /* RING_SAUL_TX_1_CHAN */
- ti,sci-rm-range-rchan = <0x29>, /* UNMAPPED_RX_CHAN */
- <0x2b>, /* CPSW_RX_CHAN */
- <0x2d>, /* SAUL_RX_0_CHAN */
- <0x2f>, /* SAUL_RX_1_CHAN */
- <0x31>, /* SAUL_RX_2_CHAN */
- <0x33>; /* SAUL_RX_3_CHAN */
- ti,sci-rm-range-rflow = <0x2a>, /* FLOW_UNMAPPED_RX_CHAN */
- <0x2c>, /* FLOW_CPSW_RX_CHAN */
- <0x2e>, /* FLOW_SAUL_RX_0/1_CHAN */
- <0x32>; /* FLOW_SAUL_RX_2/3_CHAN */
- };
- };
-
- dmsc: system-controller@44043000 {
- bootph-all;
- compatible = "ti,k2g-sci";
- ti,host-id = <12>;
- mbox-names = "rx", "tx";
- mboxes = <&secure_proxy_main 12>,
- <&secure_proxy_main 13>;
- reg-names = "debug_messages";
- reg = <0x00 0x44043000 0x00 0xfe0>;
-
- k3_pds: power-controller {
- bootph-all;
- compatible = "ti,sci-pm-domain";
- #power-domain-cells = <2>;
- };
-
- k3_clks: clock-controller {
- bootph-all;
- compatible = "ti,k2g-sci-clk";
- #clock-cells = <2>;
- };
-
- k3_reset: reset-controller {
- bootph-all;
- compatible = "ti,sci-reset";
- #reset-cells = <2>;
- };
- };
-
- crypto: crypto@40900000 {
- compatible = "ti,am62-sa3ul";
- reg = <0x00 0x40900000 0x00 0x1200>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x00 0x40900000 0x00 0x40900000 0x00 0x30000>;
-
- dmas = <&main_pktdma 0xf501 0>, <&main_pktdma 0x7506 0>,
- <&main_pktdma 0x7507 0>;
- dma-names = "tx", "rx1", "rx2";
- };
-
- secure_proxy_sa3: mailbox@43600000 {
- bootph-pre-ram;
- compatible = "ti,am654-secure-proxy";
- #mbox-cells = <1>;
- reg-names = "target_data", "rt", "scfg";
- reg = <0x00 0x43600000 0x00 0x10000>,
- <0x00 0x44880000 0x00 0x20000>,
- <0x00 0x44860000 0x00 0x20000>;
- /*
- * Marked Disabled:
- * Node is incomplete as it is meant for bootloaders and
- * firmware on non-MPU processors
- */
- status = "disabled";
- };
-
- main_pmx0: pinctrl@f4000 {
- bootph-all;
- compatible = "pinctrl-single";
- reg = <0x00 0xf4000 0x00 0x2ac>;
- #pinctrl-cells = <1>;
- pinctrl-single,register-width = <32>;
- pinctrl-single,function-mask = <0xffffffff>;
- };
-
- main_esm: esm@420000 {
- bootph-pre-ram;
- compatible = "ti,j721e-esm";
- reg = <0x00 0x420000 0x00 0x1000>;
- ti,esm-pins = <160>, <161>, <162>, <163>, <177>, <178>;
- };
-
- main_timer0: timer@2400000 {
- bootph-all;
- compatible = "ti,am654-timer";
- reg = <0x00 0x2400000 0x00 0x400>;
- interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&k3_clks 36 2>;
- clock-names = "fck";
- assigned-clocks = <&k3_clks 36 2>;
- assigned-clock-parents = <&k3_clks 36 3>;
- power-domains = <&k3_pds 36 TI_SCI_PD_EXCLUSIVE>;
- ti,timer-pwm;
- };
-
- main_timer1: timer@2410000 {
- compatible = "ti,am654-timer";
- reg = <0x00 0x2410000 0x00 0x400>;
- interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&k3_clks 37 2>;
- clock-names = "fck";
- assigned-clocks = <&k3_clks 37 2>;
- assigned-clock-parents = <&k3_clks 37 3>;
- power-domains = <&k3_pds 37 TI_SCI_PD_EXCLUSIVE>;
- ti,timer-pwm;
- };
-
- main_timer2: timer@2420000 {
- compatible = "ti,am654-timer";
- reg = <0x00 0x2420000 0x00 0x400>;
- interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&k3_clks 38 2>;
- clock-names = "fck";
- assigned-clocks = <&k3_clks 38 2>;
- assigned-clock-parents = <&k3_clks 38 3>;
- power-domains = <&k3_pds 38 TI_SCI_PD_EXCLUSIVE>;
- ti,timer-pwm;
- };
-
- main_timer3: timer@2430000 {
- compatible = "ti,am654-timer";
- reg = <0x00 0x2430000 0x00 0x400>;
- interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&k3_clks 39 2>;
- clock-names = "fck";
- assigned-clocks = <&k3_clks 39 2>;
- assigned-clock-parents = <&k3_clks 39 3>;
- power-domains = <&k3_pds 39 TI_SCI_PD_EXCLUSIVE>;
- ti,timer-pwm;
- };
-
- main_timer4: timer@2440000 {
- compatible = "ti,am654-timer";
- reg = <0x00 0x2440000 0x00 0x400>;
- interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&k3_clks 40 2>;
- clock-names = "fck";
- assigned-clocks = <&k3_clks 40 2>;
- assigned-clock-parents = <&k3_clks 40 3>;
- power-domains = <&k3_pds 40 TI_SCI_PD_EXCLUSIVE>;
- ti,timer-pwm;
- };
-
- main_timer5: timer@2450000 {
- compatible = "ti,am654-timer";
- reg = <0x00 0x2450000 0x00 0x400>;
- interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&k3_clks 41 2>;
- clock-names = "fck";
- assigned-clocks = <&k3_clks 41 2>;
- assigned-clock-parents = <&k3_clks 41 3>;
- power-domains = <&k3_pds 41 TI_SCI_PD_EXCLUSIVE>;
- ti,timer-pwm;
- };
-
- main_timer6: timer@2460000 {
- compatible = "ti,am654-timer";
- reg = <0x00 0x2460000 0x00 0x400>;
- interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&k3_clks 42 2>;
- clock-names = "fck";
- assigned-clocks = <&k3_clks 42 2>;
- assigned-clock-parents = <&k3_clks 42 3>;
- power-domains = <&k3_pds 42 TI_SCI_PD_EXCLUSIVE>;
- ti,timer-pwm;
- };
-
- main_timer7: timer@2470000 {
- compatible = "ti,am654-timer";
- reg = <0x00 0x2470000 0x00 0x400>;
- interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&k3_clks 43 2>;
- clock-names = "fck";
- assigned-clocks = <&k3_clks 43 2>;
- assigned-clock-parents = <&k3_clks 43 3>;
- power-domains = <&k3_pds 43 TI_SCI_PD_EXCLUSIVE>;
- ti,timer-pwm;
- };
-
- main_uart0: serial@2800000 {
- compatible = "ti,am64-uart", "ti,am654-uart";
- reg = <0x00 0x02800000 0x00 0x100>;
- interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 146 0>;
- clock-names = "fclk";
- status = "disabled";
- };
-
- main_uart1: serial@2810000 {
- compatible = "ti,am64-uart", "ti,am654-uart";
- reg = <0x00 0x02810000 0x00 0x100>;
- interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 152 0>;
- clock-names = "fclk";
- status = "disabled";
- };
-
- main_uart2: serial@2820000 {
- compatible = "ti,am64-uart", "ti,am654-uart";
- reg = <0x00 0x02820000 0x00 0x100>;
- interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&k3_pds 153 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 153 0>;
- clock-names = "fclk";
- status = "disabled";
- };
-
- main_uart3: serial@2830000 {
- compatible = "ti,am64-uart", "ti,am654-uart";
- reg = <0x00 0x02830000 0x00 0x100>;
- interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 154 0>;
- clock-names = "fclk";
- status = "disabled";
- };
-
- main_uart4: serial@2840000 {
- compatible = "ti,am64-uart", "ti,am654-uart";
- reg = <0x00 0x02840000 0x00 0x100>;
- interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&k3_pds 155 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 155 0>;
- clock-names = "fclk";
- status = "disabled";
- };
-
- main_uart5: serial@2850000 {
- compatible = "ti,am64-uart", "ti,am654-uart";
- reg = <0x00 0x02850000 0x00 0x100>;
- interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&k3_pds 156 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 156 0>;
- clock-names = "fclk";
- status = "disabled";
- };
-
- main_uart6: serial@2860000 {
- compatible = "ti,am64-uart", "ti,am654-uart";
- reg = <0x00 0x02860000 0x00 0x100>;
- interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&k3_pds 158 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 158 0>;
- clock-names = "fclk";
- status = "disabled";
- };
-
- main_i2c0: i2c@20000000 {
- compatible = "ti,am64-i2c", "ti,omap4-i2c";
- reg = <0x00 0x20000000 0x00 0x100>;
- interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 102 2>;
- clock-names = "fck";
- status = "disabled";
- };
-
- main_i2c1: i2c@20010000 {
- compatible = "ti,am64-i2c", "ti,omap4-i2c";
- reg = <0x00 0x20010000 0x00 0x100>;
- interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 103 2>;
- clock-names = "fck";
- status = "disabled";
- };
-
- main_i2c2: i2c@20020000 {
- compatible = "ti,am64-i2c", "ti,omap4-i2c";
- reg = <0x00 0x20020000 0x00 0x100>;
- interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 104 2>;
- clock-names = "fck";
- status = "disabled";
- };
-
- main_i2c3: i2c@20030000 {
- compatible = "ti,am64-i2c", "ti,omap4-i2c";
- reg = <0x00 0x20030000 0x00 0x100>;
- interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 105 2>;
- clock-names = "fck";
- status = "disabled";
- };
-
- main_spi0: spi@20100000 {
- compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
- reg = <0x00 0x20100000 0x00 0x400>;
- interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- power-domains = <&k3_pds 141 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 141 0>;
- status = "disabled";
- };
-
- main_spi1: spi@20110000 {
- compatible = "ti,am654-mcspi","ti,omap4-mcspi";
- reg = <0x00 0x20110000 0x00 0x400>;
- interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- power-domains = <&k3_pds 142 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 142 0>;
- status = "disabled";
- };
-
- main_spi2: spi@20120000 {
- compatible = "ti,am654-mcspi","ti,omap4-mcspi";
- reg = <0x00 0x20120000 0x00 0x400>;
- interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- power-domains = <&k3_pds 143 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 143 0>;
- status = "disabled";
- };
-
- main_gpio_intr: interrupt-controller@a00000 {
- compatible = "ti,sci-intr";
- reg = <0x00 0x00a00000 0x00 0x800>;
- ti,intr-trigger-type = <1>;
- interrupt-controller;
- interrupt-parent = <&gic500>;
- #interrupt-cells = <1>;
- ti,sci = <&dmsc>;
- ti,sci-dev-id = <3>;
- ti,interrupt-ranges = <0 32 16>;
- };
-
- main_gpio0: gpio@600000 {
- compatible = "ti,am64-gpio", "ti,keystone-gpio";
- reg = <0x0 0x00600000 0x0 0x100>;
- gpio-ranges = <&main_pmx0 0 0 32>,
- <&main_pmx0 32 33 38>,
- <&main_pmx0 70 72 22>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-parent = <&main_gpio_intr>;
- interrupts = <190>, <191>, <192>,
- <193>, <194>, <195>;
- interrupt-controller;
- #interrupt-cells = <2>;
- ti,ngpio = <92>;
- ti,davinci-gpio-unbanked = <0>;
- power-domains = <&k3_pds 77 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 77 0>;
- clock-names = "gpio";
- };
-
- main_gpio1: gpio@601000 {
- compatible = "ti,am64-gpio", "ti,keystone-gpio";
- reg = <0x0 0x00601000 0x0 0x100>;
- gpio-controller;
- gpio-ranges = <&main_pmx0 0 94 41>,
- <&main_pmx0 41 136 6>,
- <&main_pmx0 47 143 3>,
- <&main_pmx0 50 149 2>;
- #gpio-cells = <2>;
- interrupt-parent = <&main_gpio_intr>;
- interrupts = <180>, <181>, <182>,
- <183>, <184>, <185>;
- interrupt-controller;
- #interrupt-cells = <2>;
- ti,ngpio = <52>;
- ti,davinci-gpio-unbanked = <0>;
- power-domains = <&k3_pds 78 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 78 0>;
- clock-names = "gpio";
- };
-
- sdhci0: mmc@fa10000 {
- compatible = "ti,am62-sdhci";
- reg = <0x00 0x0fa10000 0x00 0x1000>, <0x00 0x0fa18000 0x00 0x400>;
- interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&k3_pds 57 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 57 5>, <&k3_clks 57 6>;
- clock-names = "clk_ahb", "clk_xin";
- assigned-clocks = <&k3_clks 57 6>;
- assigned-clock-parents = <&k3_clks 57 8>;
- bus-width = <8>;
- mmc-ddr-1_8v;
- mmc-hs200-1_8v;
- ti,clkbuf-sel = <0x7>;
- ti,otap-del-sel-legacy = <0x0>;
- ti,otap-del-sel-mmc-hs = <0x0>;
- ti,otap-del-sel-ddr52 = <0x5>;
- ti,otap-del-sel-hs200 = <0x5>;
- ti,itap-del-sel-legacy = <0xa>;
- ti,itap-del-sel-mmc-hs = <0x1>;
- status = "disabled";
- };
-
- sdhci1: mmc@fa00000 {
- compatible = "ti,am62-sdhci";
- reg = <0x00 0x0fa00000 0x00 0x1000>, <0x00 0x0fa08000 0x00 0x400>;
- interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 58 5>, <&k3_clks 58 6>;
- clock-names = "clk_ahb", "clk_xin";
- bus-width = <4>;
- ti,clkbuf-sel = <0x7>;
- ti,otap-del-sel-legacy = <0x8>;
- ti,otap-del-sel-sd-hs = <0x0>;
- ti,otap-del-sel-sdr12 = <0x0>;
- ti,otap-del-sel-sdr25 = <0x0>;
- ti,otap-del-sel-sdr50 = <0x8>;
- ti,otap-del-sel-sdr104 = <0x7>;
- ti,otap-del-sel-ddr50 = <0x4>;
- ti,itap-del-sel-legacy = <0xa>;
- ti,itap-del-sel-sd-hs = <0x1>;
- ti,itap-del-sel-sdr12 = <0xa>;
- ti,itap-del-sel-sdr25 = <0x1>;
- status = "disabled";
- };
-
- sdhci2: mmc@fa20000 {
- compatible = "ti,am62-sdhci";
- reg = <0x00 0x0fa20000 0x00 0x1000>, <0x00 0x0fa28000 0x00 0x400>;
- interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&k3_pds 184 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 184 5>, <&k3_clks 184 6>;
- clock-names = "clk_ahb", "clk_xin";
- bus-width = <4>;
- ti,clkbuf-sel = <0x7>;
- ti,otap-del-sel-legacy = <0x8>;
- ti,otap-del-sel-sd-hs = <0x0>;
- ti,otap-del-sel-sdr12 = <0x0>;
- ti,otap-del-sel-sdr25 = <0x0>;
- ti,otap-del-sel-sdr50 = <0x8>;
- ti,otap-del-sel-sdr104 = <0x7>;
- ti,otap-del-sel-ddr50 = <0x8>;
- ti,itap-del-sel-legacy = <0xa>;
- ti,itap-del-sel-sd-hs = <0xa>;
- ti,itap-del-sel-sdr12 = <0xa>;
- ti,itap-del-sel-sdr25 = <0x1>;
- status = "disabled";
- };
-
- usbss0: dwc3-usb@f900000 {
- compatible = "ti,am62-usb";
- reg = <0x00 0x0f900000 0x00 0x800>;
- clocks = <&k3_clks 161 3>;
- clock-names = "ref";
- ti,syscon-phy-pll-refclk = <&wkup_conf 0x4008>;
- #address-cells = <2>;
- #size-cells = <2>;
- power-domains = <&k3_pds 178 TI_SCI_PD_EXCLUSIVE>;
- ranges;
- status = "disabled";
-
- usb0: usb@31000000 {
- compatible = "snps,dwc3";
- reg = <0x00 0x31000000 0x00 0x50000>;
- interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
- <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */
- interrupt-names = "host", "peripheral";
- maximum-speed = "high-speed";
- dr_mode = "otg";
- snps,usb2-gadget-lpm-disable;
- snps,usb2-lpm-disable;
- };
- };
-
- usbss1: dwc3-usb@f910000 {
- compatible = "ti,am62-usb";
- reg = <0x00 0x0f910000 0x00 0x800>;
- clocks = <&k3_clks 162 3>;
- clock-names = "ref";
- ti,syscon-phy-pll-refclk = <&wkup_conf 0x4018>;
- #address-cells = <2>;
- #size-cells = <2>;
- power-domains = <&k3_pds 179 TI_SCI_PD_EXCLUSIVE>;
- ranges;
- status = "disabled";
-
- usb1: usb@31100000 {
- compatible = "snps,dwc3";
- reg = <0x00 0x31100000 0x00 0x50000>;
- interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
- <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */
- interrupt-names = "host", "peripheral";
- maximum-speed = "high-speed";
- dr_mode = "otg";
- snps,usb2-gadget-lpm-disable;
- snps,usb2-lpm-disable;
- };
- };
-
- fss: bus@fc00000 {
- compatible = "simple-bus";
- reg = <0x00 0x0fc00000 0x00 0x70000>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- ospi0: spi@fc40000 {
- compatible = "ti,am654-ospi", "cdns,qspi-nor";
- reg = <0x00 0x0fc40000 0x00 0x100>,
- <0x05 0x00000000 0x01 0x00000000>;
- interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
- cdns,fifo-depth = <256>;
- cdns,fifo-width = <4>;
- cdns,trigger-address = <0x0>;
- clocks = <&k3_clks 75 7>;
- assigned-clocks = <&k3_clks 75 7>;
- assigned-clock-parents = <&k3_clks 75 8>;
- assigned-clock-rates = <166666666>;
- power-domains = <&k3_pds 75 TI_SCI_PD_EXCLUSIVE>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
- };
-
- gpu: gpu@fd00000 {
- compatible = "ti,am62-gpu", "img,img-axe";
- reg = <0x00 0x0fd00000 0x00 0x20000>;
- clocks = <&k3_clks 187 0>;
- clock-names = "core";
- interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&k3_pds 187 TI_SCI_PD_EXCLUSIVE>;
- };
-
- cpsw3g: ethernet@8000000 {
- compatible = "ti,am642-cpsw-nuss";
- #address-cells = <2>;
- #size-cells = <2>;
- reg = <0x00 0x08000000 0x00 0x200000>;
- reg-names = "cpsw_nuss";
- ranges = <0x00 0x00 0x00 0x08000000 0x00 0x200000>;
- clocks = <&k3_clks 13 0>;
- assigned-clocks = <&k3_clks 13 3>;
- assigned-clock-parents = <&k3_clks 13 11>;
- clock-names = "fck";
- power-domains = <&k3_pds 13 TI_SCI_PD_EXCLUSIVE>;
-
- dmas = <&main_pktdma 0xc600 15>,
- <&main_pktdma 0xc601 15>,
- <&main_pktdma 0xc602 15>,
- <&main_pktdma 0xc603 15>,
- <&main_pktdma 0xc604 15>,
- <&main_pktdma 0xc605 15>,
- <&main_pktdma 0xc606 15>,
- <&main_pktdma 0xc607 15>,
- <&main_pktdma 0x4600 15>;
- dma-names = "tx0", "tx1", "tx2", "tx3", "tx4", "tx5", "tx6",
- "tx7", "rx";
-
- ethernet-ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpsw_port1: port@1 {
- reg = <1>;
- ti,mac-only;
- label = "port1";
- phys = <&phy_gmii_sel 1>;
- mac-address = [00 00 00 00 00 00];
- ti,syscon-efuse = <&wkup_conf 0x200>;
- };
-
- cpsw_port2: port@2 {
- reg = <2>;
- ti,mac-only;
- label = "port2";
- phys = <&phy_gmii_sel 2>;
- mac-address = [00 00 00 00 00 00];
- };
- };
-
- cpsw3g_mdio: mdio@f00 {
- compatible = "ti,cpsw-mdio","ti,davinci_mdio";
- reg = <0x00 0xf00 0x00 0x100>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&k3_clks 13 0>;
- clock-names = "fck";
- bus_freq = <1000000>;
- status = "disabled";
- };
-
- cpts@3d000 {
- compatible = "ti,j721e-cpts";
- reg = <0x00 0x3d000 0x00 0x400>;
- clocks = <&k3_clks 13 3>;
- clock-names = "cpts";
- interrupts-extended = <&gic500 GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "cpts";
- ti,cpts-ext-ts-inputs = <4>;
- ti,cpts-periodic-outputs = <2>;
- };
- };
-
- dss: dss@30200000 {
- compatible = "ti,am625-dss";
- reg = <0x00 0x30200000 0x00 0x1000>, /* common */
- <0x00 0x30202000 0x00 0x1000>, /* vidl1 */
- <0x00 0x30206000 0x00 0x1000>, /* vid */
- <0x00 0x30207000 0x00 0x1000>, /* ovr1 */
- <0x00 0x30208000 0x00 0x1000>, /* ovr2 */
- <0x00 0x3020a000 0x00 0x1000>, /* vp1: Used for OLDI */
- <0x00 0x3020b000 0x00 0x1000>, /* vp2: Used as DPI Out */
- <0x00 0x30201000 0x00 0x1000>; /* common1 */
- reg-names = "common", "vidl1", "vid",
- "ovr1", "ovr2", "vp1", "vp2", "common1";
- power-domains = <&k3_pds 186 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 186 6>,
- <&dss_vp1_clk>,
- <&k3_clks 186 2>;
- clock-names = "fck", "vp1", "vp2";
- interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
-
- dss_ports: ports {
- #address-cells = <1>;
- #size-cells = <0>;
- };
- };
-
- hwspinlock: spinlock@2a000000 {
- compatible = "ti,am64-hwspinlock";
- reg = <0x00 0x2a000000 0x00 0x1000>;
- #hwlock-cells = <1>;
- };
-
- mailbox0_cluster0: mailbox@29000000 {
- compatible = "ti,am64-mailbox";
- reg = <0x00 0x29000000 0x00 0x200>;
- interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
- #mbox-cells = <1>;
- ti,mbox-num-users = <4>;
- ti,mbox-num-fifos = <16>;
- };
-
- ecap0: pwm@23100000 {
- compatible = "ti,am3352-ecap";
- #pwm-cells = <3>;
- reg = <0x00 0x23100000 0x00 0x100>;
- power-domains = <&k3_pds 51 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 51 0>;
- clock-names = "fck";
- status = "disabled";
- };
-
- ecap1: pwm@23110000 {
- compatible = "ti,am3352-ecap";
- #pwm-cells = <3>;
- reg = <0x00 0x23110000 0x00 0x100>;
- power-domains = <&k3_pds 52 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 52 0>;
- clock-names = "fck";
- status = "disabled";
- };
-
- ecap2: pwm@23120000 {
- compatible = "ti,am3352-ecap";
- #pwm-cells = <3>;
- reg = <0x00 0x23120000 0x00 0x100>;
- power-domains = <&k3_pds 53 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 53 0>;
- clock-names = "fck";
- status = "disabled";
- };
-
- main_mcan0: can@20701000 {
- compatible = "bosch,m_can";
- reg = <0x00 0x20701000 0x00 0x200>,
- <0x00 0x20708000 0x00 0x8000>;
- reg-names = "m_can", "message_ram";
- power-domains = <&k3_pds 98 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 98 6>, <&k3_clks 98 1>;
- clock-names = "hclk", "cclk";
- interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "int0", "int1";
- bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
- status = "disabled";
- };
-
- main_rti0: watchdog@e000000 {
- compatible = "ti,j7-rti-wdt";
- reg = <0x00 0x0e000000 0x00 0x100>;
- clocks = <&k3_clks 125 0>;
- power-domains = <&k3_pds 125 TI_SCI_PD_EXCLUSIVE>;
- assigned-clocks = <&k3_clks 125 0>;
- assigned-clock-parents = <&k3_clks 125 2>;
- };
-
- main_rti1: watchdog@e010000 {
- compatible = "ti,j7-rti-wdt";
- reg = <0x00 0x0e010000 0x00 0x100>;
- clocks = <&k3_clks 126 0>;
- power-domains = <&k3_pds 126 TI_SCI_PD_EXCLUSIVE>;
- assigned-clocks = <&k3_clks 126 0>;
- assigned-clock-parents = <&k3_clks 126 2>;
- };
-
- main_rti2: watchdog@e020000 {
- compatible = "ti,j7-rti-wdt";
- reg = <0x00 0x0e020000 0x00 0x100>;
- clocks = <&k3_clks 127 0>;
- power-domains = <&k3_pds 127 TI_SCI_PD_EXCLUSIVE>;
- assigned-clocks = <&k3_clks 127 0>;
- assigned-clock-parents = <&k3_clks 127 2>;
- };
-
- main_rti3: watchdog@e030000 {
- compatible = "ti,j7-rti-wdt";
- reg = <0x00 0x0e030000 0x00 0x100>;
- clocks = <&k3_clks 128 0>;
- power-domains = <&k3_pds 128 TI_SCI_PD_EXCLUSIVE>;
- assigned-clocks = <&k3_clks 128 0>;
- assigned-clock-parents = <&k3_clks 128 2>;
- };
-
- main_rti15: watchdog@e0f0000 {
- compatible = "ti,j7-rti-wdt";
- reg = <0x00 0x0e0f0000 0x00 0x100>;
- clocks = <&k3_clks 130 0>;
- power-domains = <&k3_pds 130 TI_SCI_PD_EXCLUSIVE>;
- assigned-clocks = <&k3_clks 130 0>;
- assigned-clock-parents = <&k3_clks 130 2>;
- };
-
- epwm0: pwm@23000000 {
- compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
- #pwm-cells = <3>;
- reg = <0x00 0x23000000 0x00 0x100>;
- power-domains = <&k3_pds 86 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&epwm_tbclk 0>, <&k3_clks 86 0>;
- clock-names = "tbclk", "fck";
- status = "disabled";
- };
-
- epwm1: pwm@23010000 {
- compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
- #pwm-cells = <3>;
- reg = <0x00 0x23010000 0x00 0x100>;
- power-domains = <&k3_pds 87 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&epwm_tbclk 1>, <&k3_clks 87 0>;
- clock-names = "tbclk", "fck";
- status = "disabled";
- };
-
- epwm2: pwm@23020000 {
- compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
- #pwm-cells = <3>;
- reg = <0x00 0x23020000 0x00 0x100>;
- power-domains = <&k3_pds 88 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&epwm_tbclk 2>, <&k3_clks 88 0>;
- clock-names = "tbclk", "fck";
- status = "disabled";
- };
-
- mcasp0: audio-controller@2b00000 {
- compatible = "ti,am33xx-mcasp-audio";
- reg = <0x00 0x02b00000 0x00 0x2000>,
- <0x00 0x02b08000 0x00 0x400>;
- reg-names = "mpu", "dat";
- interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tx", "rx";
-
- dmas = <&main_bcdma 0 0xc500 0>, <&main_bcdma 0 0x4500 0>;
- dma-names = "tx", "rx";
-
- clocks = <&k3_clks 190 0>;
- clock-names = "fck";
- assigned-clocks = <&k3_clks 190 0>;
- assigned-clock-parents = <&k3_clks 190 2>;
- power-domains = <&k3_pds 190 TI_SCI_PD_EXCLUSIVE>;
- status = "disabled";
- };
-
- mcasp1: audio-controller@2b10000 {
- compatible = "ti,am33xx-mcasp-audio";
- reg = <0x00 0x02b10000 0x00 0x2000>,
- <0x00 0x02b18000 0x00 0x400>;
- reg-names = "mpu", "dat";
- interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tx", "rx";
-
- dmas = <&main_bcdma 0 0xc501 0>, <&main_bcdma 0 0x4501 0>;
- dma-names = "tx", "rx";
-
- clocks = <&k3_clks 191 0>;
- clock-names = "fck";
- assigned-clocks = <&k3_clks 191 0>;
- assigned-clock-parents = <&k3_clks 191 2>;
- power-domains = <&k3_pds 191 TI_SCI_PD_EXCLUSIVE>;
- status = "disabled";
- };
-
- mcasp2: audio-controller@2b20000 {
- compatible = "ti,am33xx-mcasp-audio";
- reg = <0x00 0x02b20000 0x00 0x2000>,
- <0x00 0x02b28000 0x00 0x400>;
- reg-names = "mpu", "dat";
- interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tx", "rx";
-
- dmas = <&main_bcdma 0 0xc502 0>, <&main_bcdma 0 0x4502 0>;
- dma-names = "tx", "rx";
-
- clocks = <&k3_clks 192 0>;
- clock-names = "fck";
- assigned-clocks = <&k3_clks 192 0>;
- assigned-clock-parents = <&k3_clks 192 2>;
- power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>;
- status = "disabled";
- };
-
- ti_csi2rx0: ticsi2rx@30102000 {
- compatible = "ti,j721e-csi2rx-shim";
- dmas = <&main_bcdma 0 0x4700 0>;
- dma-names = "rx0";
- reg = <0x00 0x30102000 0x00 0x1000>;
- power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
- status = "disabled";
-
- cdns_csi2rx0: csi-bridge@30101000 {
- compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
- reg = <0x00 0x30101000 0x00 0x1000>;
- clocks = <&k3_clks 182 0>, <&k3_clks 182 3>, <&k3_clks 182 0>,
- <&k3_clks 182 0>, <&k3_clks 182 4>, <&k3_clks 182 4>;
- clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
- "pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk";
- phys = <&dphy0>;
- phy-names = "dphy";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- csi0_port0: port@0 {
- reg = <0>;
- status = "disabled";
- };
-
- csi0_port1: port@1 {
- reg = <1>;
- status = "disabled";
- };
-
- csi0_port2: port@2 {
- reg = <2>;
- status = "disabled";
- };
-
- csi0_port3: port@3 {
- reg = <3>;
- status = "disabled";
- };
-
- csi0_port4: port@4 {
- reg = <4>;
- status = "disabled";
- };
- };
- };
- };
-
- dphy0: phy@30110000 {
- compatible = "cdns,dphy-rx";
- reg = <0x00 0x30110000 0x00 0x1100>;
- #phy-cells = <0>;
- power-domains = <&k3_pds 185 TI_SCI_PD_EXCLUSIVE>;
- status = "disabled";
- };
-
-};
diff --git a/arch/arm/dts/k3-am62-mcu.dtsi b/arch/arm/dts/k3-am62-mcu.dtsi
deleted file mode 100644
index e66d486ef1f2..000000000000
--- a/arch/arm/dts/k3-am62-mcu.dtsi
+++ /dev/null
@@ -1,176 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only OR MIT
-/*
- * Device Tree Source for AM625 SoC Family MCU Domain peripherals
- *
- * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-&cbass_mcu {
- mcu_pmx0: pinctrl@4084000 {
- bootph-all;
- compatible = "pinctrl-single";
- reg = <0x00 0x04084000 0x00 0x88>;
- #pinctrl-cells = <1>;
- pinctrl-single,register-width = <32>;
- pinctrl-single,function-mask = <0xffffffff>;
- };
-
- mcu_esm: esm@4100000 {
- bootph-pre-ram;
- compatible = "ti,j721e-esm";
- reg = <0x00 0x4100000 0x00 0x1000>;
- ti,esm-pins = <0>, <1>, <2>, <85>;
- };
-
- /*
- * The MCU domain timer interrupts are routed only to the ESM module,
- * and not currently available for Linux. The MCU domain timers are
- * of limited use without interrupts, and likely reserved by the ESM.
- */
- mcu_timer0: timer@4800000 {
- compatible = "ti,am654-timer";
- reg = <0x00 0x4800000 0x00 0x400>;
- clocks = <&k3_clks 35 2>;
- clock-names = "fck";
- power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>;
- ti,timer-pwm;
- status = "reserved";
- };
-
- mcu_timer1: timer@4810000 {
- compatible = "ti,am654-timer";
- reg = <0x00 0x4810000 0x00 0x400>;
- clocks = <&k3_clks 48 2>;
- clock-names = "fck";
- power-domains = <&k3_pds 48 TI_SCI_PD_EXCLUSIVE>;
- ti,timer-pwm;
- status = "reserved";
- };
-
- mcu_timer2: timer@4820000 {
- compatible = "ti,am654-timer";
- reg = <0x00 0x4820000 0x00 0x400>;
- clocks = <&k3_clks 49 2>;
- clock-names = "fck";
- power-domains = <&k3_pds 49 TI_SCI_PD_EXCLUSIVE>;
- ti,timer-pwm;
- status = "reserved";
- };
-
- mcu_timer3: timer@4830000 {
- compatible = "ti,am654-timer";
- reg = <0x00 0x4830000 0x00 0x400>;
- clocks = <&k3_clks 50 2>;
- clock-names = "fck";
- power-domains = <&k3_pds 50 TI_SCI_PD_EXCLUSIVE>;
- ti,timer-pwm;
- status = "reserved";
- };
-
- mcu_uart0: serial@4a00000 {
- compatible = "ti,am64-uart", "ti,am654-uart";
- reg = <0x00 0x04a00000 0x00 0x100>;
- interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 149 0>;
- clock-names = "fclk";
- status = "disabled";
- };
-
- mcu_i2c0: i2c@4900000 {
- compatible = "ti,am64-i2c", "ti,omap4-i2c";
- reg = <0x00 0x04900000 0x00 0x100>;
- interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 106 2>;
- clock-names = "fck";
- status = "disabled";
- };
-
- mcu_spi0: spi@4b00000 {
- compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
- reg = <0x00 0x04b00000 0x00 0x400>;
- interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 147 0>;
- status = "disabled";
- };
-
- mcu_spi1: spi@4b10000 {
- compatible = "ti,am654-mcspi","ti,omap4-mcspi";
- reg = <0x00 0x04b10000 0x00 0x400>;
- interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 148 0>;
- status = "disabled";
- };
-
- mcu_gpio_intr: interrupt-controller@4210000 {
- compatible = "ti,sci-intr";
- reg = <0x00 0x04210000 0x00 0x200>;
- ti,intr-trigger-type = <1>;
- interrupt-controller;
- interrupt-parent = <&gic500>;
- #interrupt-cells = <1>;
- ti,sci = <&dmsc>;
- ti,sci-dev-id = <5>;
- ti,interrupt-ranges = <0 104 4>;
- };
-
- mcu_gpio0: gpio@4201000 {
- compatible = "ti,am64-gpio", "ti,keystone-gpio";
- reg = <0x00 0x4201000 0x00 0x100>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-parent = <&mcu_gpio_intr>;
- interrupts = <30>, <31>;
- interrupt-controller;
- #interrupt-cells = <2>;
- ti,ngpio = <24>;
- ti,davinci-gpio-unbanked = <0>;
- power-domains = <&k3_pds 79 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 79 0>;
- clock-names = "gpio";
- };
-
- mcu_rti0: watchdog@4880000 {
- compatible = "ti,j7-rti-wdt";
- reg = <0x00 0x04880000 0x00 0x100>;
- clocks = <&k3_clks 131 0>;
- power-domains = <&k3_pds 131 TI_SCI_PD_EXCLUSIVE>;
- assigned-clocks = <&k3_clks 131 0>;
- assigned-clock-parents = <&k3_clks 131 2>;
- /* Tightly coupled to M4F */
- status = "reserved";
- };
-
- mcu_mcan0: can@4e08000 {
- compatible = "bosch,m_can";
- reg = <0x00 0x4e08000 0x00 0x200>,
- <0x00 0x4e00000 0x00 0x8000>;
- reg-names = "m_can", "message_ram";
- power-domains = <&k3_pds 188 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 188 6>, <&k3_clks 188 1>;
- clock-names = "hclk", "cclk";
- bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
- status = "disabled";
- };
-
- mcu_mcan1: can@4e18000 {
- compatible = "bosch,m_can";
- reg = <0x00 0x4e18000 0x00 0x200>,
- <0x00 0x4e10000 0x00 0x8000>;
- reg-names = "m_can", "message_ram";
- power-domains = <&k3_pds 189 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 189 6>, <&k3_clks 189 1>;
- clock-names = "hclk", "cclk";
- bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
- status = "disabled";
- };
-};
diff --git a/arch/arm/dts/k3-am62-thermal.dtsi b/arch/arm/dts/k3-am62-thermal.dtsi
deleted file mode 100644
index 12ba833002a1..000000000000
--- a/arch/arm/dts/k3-am62-thermal.dtsi
+++ /dev/null
@@ -1,36 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only OR MIT
-/*
- * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-#include <dt-bindings/thermal/thermal.h>
-
-thermal_zones: thermal-zones {
- main0_thermal: main0-thermal {
- polling-delay-passive = <250>; /* milliSeconds */
- polling-delay = <500>; /* milliSeconds */
- thermal-sensors = <&wkup_vtm0 0>;
-
- trips {
- main0_crit: main0-crit {
- temperature = <105000>; /* milliCelsius */
- hysteresis = <2000>; /* milliCelsius */
- type = "critical";
- };
- };
- };
-
- main1_thermal: main1-thermal {
- polling-delay-passive = <250>; /* milliSeconds */
- polling-delay = <500>; /* milliSeconds */
- thermal-sensors = <&wkup_vtm0 1>;
-
- trips {
- main1_crit: main1-crit {
- temperature = <105000>; /* milliCelsius */
- hysteresis = <2000>; /* milliCelsius */
- type = "critical";
- };
- };
- };
-};
diff --git a/arch/arm/dts/k3-am62-wakeup.dtsi b/arch/arm/dts/k3-am62-wakeup.dtsi
deleted file mode 100644
index 23ce1bfda8d6..000000000000
--- a/arch/arm/dts/k3-am62-wakeup.dtsi
+++ /dev/null
@@ -1,96 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only OR MIT
-/*
- * Device Tree Source for AM625 SoC Family Wakeup Domain peripherals
- *
- * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-#include <dt-bindings/bus/ti-sysc.h>
-
-&cbass_wakeup {
- wkup_conf: syscon@43000000 {
- bootph-all;
- compatible = "syscon", "simple-mfd";
- reg = <0x00 0x43000000 0x00 0x20000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x00 0x43000000 0x20000>;
-
- chipid: chipid@14 {
- bootph-all;
- compatible = "ti,am654-chipid";
- reg = <0x14 0x4>;
- };
- };
-
- target-module@2b300050 {
- compatible = "ti,sysc-omap2", "ti,sysc";
- reg = <0x00 0x2b300050 0x00 0x4>,
- <0x00 0x2b300054 0x00 0x4>,
- <0x00 0x2b300058 0x00 0x4>;
- reg-names = "rev", "sysc", "syss";
- ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
- SYSC_OMAP2_SOFTRESET |
- SYSC_OMAP2_AUTOIDLE)>;
- ti,sysc-sidle = <SYSC_IDLE_FORCE>,
- <SYSC_IDLE_NO>,
- <SYSC_IDLE_SMART>,
- <SYSC_IDLE_SMART_WKUP>;
- ti,syss-mask = <1>;
- ti,no-reset-on-init;
- power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 114 0>;
- clock-names = "fck";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x00 0x2b300000 0x100000>;
-
- wkup_uart0: serial@0 {
- compatible = "ti,am64-uart", "ti,am654-uart";
- reg = <0x0 0x100>;
- interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
- };
-
- wkup_i2c0: i2c@2b200000 {
- compatible = "ti,am64-i2c", "ti,omap4-i2c";
- reg = <0x00 0x2b200000 0x00 0x100>;
- interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 107 4>;
- clock-names = "fck";
- status = "disabled";
- };
-
- wkup_rtc0: rtc@2b1f0000 {
- compatible = "ti,am62-rtc";
- reg = <0x00 0x2b1f0000 0x00 0x100>;
- interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&k3_clks 117 6> , <&k3_clks 117 0>;
- clock-names = "vbus", "osc32k";
- power-domains = <&k3_pds 117 TI_SCI_PD_EXCLUSIVE>;
- wakeup-source;
- };
-
- wkup_rti0: watchdog@2b000000 {
- compatible = "ti,j7-rti-wdt";
- reg = <0x00 0x2b000000 0x00 0x100>;
- clocks = <&k3_clks 132 0>;
- power-domains = <&k3_pds 132 TI_SCI_PD_EXCLUSIVE>;
- assigned-clocks = <&k3_clks 132 0>;
- assigned-clock-parents = <&k3_clks 132 2>;
- /* Used by DM firmware */
- status = "reserved";
- };
-
- wkup_vtm0: temperature-sensor@b00000 {
- compatible = "ti,j7200-vtm";
- reg = <0x00 0xb00000 0x00 0x400>,
- <0x00 0xb01000 0x00 0x400>;
- power-domains = <&k3_pds 95 TI_SCI_PD_EXCLUSIVE>;
- #thermal-sensor-cells = <1>;
- };
-};
diff --git a/arch/arm/dts/k3-am62.dtsi b/arch/arm/dts/k3-am62.dtsi
deleted file mode 100644
index f0781f2bea29..000000000000
--- a/arch/arm/dts/k3-am62.dtsi
+++ /dev/null
@@ -1,122 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only OR MIT
-/*
- * Device Tree Source for AM62 SoC Family
- *
- * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/soc/ti,sci_pm_domain.h>
-
-#include "k3-pinctrl.h"
-
-/ {
- model = "Texas Instruments K3 AM625 SoC";
- compatible = "ti,am625";
- interrupt-parent = <&gic500>;
- #address-cells = <2>;
- #size-cells = <2>;
-
- chosen { };
-
- firmware {
- optee {
- compatible = "linaro,optee-tz";
- method = "smc";
- };
-
- psci: psci {
- compatible = "arm,psci-1.0";
- method = "smc";
- };
- };
-
- a53_timer0: timer-cl0-cpu0 {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */
- <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */
- <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */
- <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */
- };
-
- pmu: pmu {
- compatible = "arm,cortex-a53-pmu";
- interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- cbass_main: bus@f0000 {
- bootph-all;
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <2>;
-
- ranges = <0x00 0x000f0000 0x00 0x000f0000 0x00 0x00030000>, /* Main MMRs */
- <0x00 0x00420000 0x00 0x00420000 0x00 0x00001000>, /* ESM0 */
- <0x00 0x00600000 0x00 0x00600000 0x00 0x00001100>, /* GPIO */
- <0x00 0x00703000 0x00 0x00703000 0x00 0x00000200>, /* USB0 debug trace */
- <0x00 0x0070c000 0x00 0x0070c000 0x00 0x00000200>, /* USB1 debug trace */
- <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* Timesync router */
- <0x00 0x01000000 0x00 0x01000000 0x00 0x01b28400>, /* First peripheral window */
- <0x00 0x08000000 0x00 0x08000000 0x00 0x00200000>, /* Main CPSW */
- <0x00 0x0e000000 0x00 0x0e000000 0x00 0x01d20000>, /* Second peripheral window */
- <0x00 0x0fd00000 0x00 0x0fd00000 0x00 0x00020000>, /* GPU */
- <0x00 0x20000000 0x00 0x20000000 0x00 0x0a008000>, /* Third peripheral window */
- <0x00 0x30040000 0x00 0x30040000 0x00 0x00080000>, /* PRUSS-M */
- <0x00 0x30101000 0x00 0x30101000 0x00 0x00010100>, /* CSI window */
- <0x00 0x30200000 0x00 0x30200000 0x00 0x00010000>, /* DSS */
- <0x00 0x31000000 0x00 0x31000000 0x00 0x00050000>, /* USB0 DWC3 Core window */
- <0x00 0x31100000 0x00 0x31100000 0x00 0x00050000>, /* USB1 DWC3 Core window */
- <0x00 0x40900000 0x00 0x40900000 0x00 0x00030000>, /* SA3UL */
- <0x00 0x43600000 0x00 0x43600000 0x00 0x00010000>, /* SA3 sproxy data */
- <0x00 0x44043000 0x00 0x44043000 0x00 0x00000fe0>, /* TI SCI DEBUG */
- <0x00 0x44860000 0x00 0x44860000 0x00 0x00040000>, /* SA3 sproxy config */
- <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>, /* DMSS */
- <0x00 0x60000000 0x00 0x60000000 0x00 0x08000000>, /* FSS0 DAT1 */
- <0x00 0x70000000 0x00 0x70000000 0x00 0x00010000>, /* OCSRAM */
- <0x01 0x00000000 0x01 0x00000000 0x00 0x00310000>, /* A53 PERIPHBASE */
- <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS0 DAT3 */
-
- /* MCU Domain Range */
- <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>,
-
- /* Wakeup Domain Range */
- <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00002400>, /* VTM */
- <0x00 0x2b000000 0x00 0x2b000000 0x00 0x00300400>,
- <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>;
-
- cbass_mcu: bus@4000000 {
- bootph-all;
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>; /* Peripheral window */
- };
-
- cbass_wakeup: bus@b00000 {
- bootph-all;
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00002400>, /* VTM */
- <0x00 0x2b000000 0x00 0x2b000000 0x00 0x00300400>, /* Peripheral Window */
- <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>;
- };
- };
-
- dss_vp1_clk: clock-divider-oldi {
- compatible = "fixed-factor-clock";
- clocks = <&k3_clks 186 0>;
- #clock-cells = <0>;
- clock-div = <7>;
- clock-mult = <1>;
- };
-
- #include "k3-am62-thermal.dtsi"
-};
-
-/* Now include the peripherals for each bus segments */
-#include "k3-am62-main.dtsi"
-#include "k3-am62-mcu.dtsi"
-#include "k3-am62-wakeup.dtsi"
diff --git a/arch/arm/dts/k3-am625-sk-binman.dtsi b/arch/arm/dts/k3-am625-sk-binman.dtsi
index dfd38d64f638..db3a3e91b08f 100644
--- a/arch/arm/dts/k3-am625-sk-binman.dtsi
+++ b/arch/arm/dts/k3-am625-sk-binman.dtsi
@@ -141,7 +141,7 @@
#ifdef CONFIG_TARGET_AM625_A53_EVM
-#define SPL_AM625_SK_DTB "spl/dts/k3-am625-sk.dtb"
+#define SPL_AM625_SK_DTB "spl/dts/ti/k3-am625-sk.dtb"
#define AM625_SK_DTB "u-boot.dtb"
&binman {
diff --git a/arch/arm/dts/k3-am625-sk.dts b/arch/arm/dts/k3-am625-sk.dts
deleted file mode 100644
index ae81ebb39d02..000000000000
--- a/arch/arm/dts/k3-am625-sk.dts
+++ /dev/null
@@ -1,299 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only OR MIT
-/*
- * AM625 SK: https://www.ti.com/lit/zip/sprr448
- *
- * Copyright (C) 2021-2024 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-/dts-v1/;
-
-#include "k3-am62x-sk-common.dtsi"
-
-/ {
- compatible = "ti,am625-sk", "ti,am625";
- model = "Texas Instruments AM625 SK";
-
- opp-table {
- /* Add 1.4GHz OPP for am625-sk board. Requires VDD_CORE to be at 0.85V */
- opp-1400000000 {
- opp-hz = /bits/ 64 <1400000000>;
- opp-supported-hw = <0x01 0x0004>;
- clock-latency-ns = <6000000>;
- };
- };
-
- memory@80000000 {
- device_type = "memory";
- /* 2G RAM */
- reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
-
- };
-
- vmain_pd: regulator-0 {
- /* TPS65988 PD CONTROLLER OUTPUT */
- bootph-all;
- compatible = "regulator-fixed";
- regulator-name = "vmain_pd";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- vcc_5v0: regulator-1 {
- /* Output of LM34936 */
- bootph-all;
- compatible = "regulator-fixed";
- regulator-name = "vcc_5v0";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&vmain_pd>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- vcc_3v3_sys: regulator-2 {
- /* output of LM61460-Q1 */
- bootph-all;
- compatible = "regulator-fixed";
- regulator-name = "vcc_3v3_sys";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vmain_pd>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- vdd_mmc1: regulator-3 {
- /* TPS22918DBVR */
- bootph-all;
- compatible = "regulator-fixed";
- regulator-name = "vdd_mmc1";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- enable-active-high;
- vin-supply = <&vcc_3v3_sys>;
- gpio = <&exp1 3 GPIO_ACTIVE_HIGH>;
- };
-
- vdd_sd_dv: regulator-4 {
- /* Output of TLV71033 */
- bootph-all;
- compatible = "regulator-gpio";
- regulator-name = "tlv71033";
- pinctrl-names = "default";
- pinctrl-0 = <&vdd_sd_dv_pins_default>;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- vin-supply = <&vcc_5v0>;
- gpios = <&main_gpio0 31 GPIO_ACTIVE_HIGH>;
- states = <1800000 0x0>,
- <3300000 0x1>;
- };
-
- vcc_1v8: regulator-5 {
- /* output of TPS6282518DMQ */
- compatible = "regulator-fixed";
- regulator-name = "vcc_1v8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vcc_3v3_sys>;
- regulator-always-on;
- regulator-boot-on;
- };
-};
-
-&main_pmx0 {
- main_rgmii2_pins_default: main-rgmii2-default-pins {
- bootph-all;
- pinctrl-single,pins = <
- AM62X_IOPAD(0x184, PIN_INPUT, 0) /* (AE23) RGMII2_RD0 */
- AM62X_IOPAD(0x188, PIN_INPUT, 0) /* (AB20) RGMII2_RD1 */
- AM62X_IOPAD(0x18c, PIN_INPUT, 0) /* (AC21) RGMII2_RD2 */
- AM62X_IOPAD(0x190, PIN_INPUT, 0) /* (AE22) RGMII2_RD3 */
- AM62X_IOPAD(0x180, PIN_INPUT, 0) /* (AD23) RGMII2_RXC */
- AM62X_IOPAD(0x17c, PIN_INPUT, 0) /* (AD22) RGMII2_RX_CTL */
- AM62X_IOPAD(0x16c, PIN_OUTPUT, 0) /* (Y18) RGMII2_TD0 */
- AM62X_IOPAD(0x170, PIN_OUTPUT, 0) /* (AA18) RGMII2_TD1 */
- AM62X_IOPAD(0x174, PIN_OUTPUT, 0) /* (AD21) RGMII2_TD2 */
- AM62X_IOPAD(0x178, PIN_OUTPUT, 0) /* (AC20) RGMII2_TD3 */
- AM62X_IOPAD(0x168, PIN_OUTPUT, 0) /* (AE21) RGMII2_TXC */
- AM62X_IOPAD(0x164, PIN_OUTPUT, 0) /* (AA19) RGMII2_TX_CTL */
- >;
- };
-
- ospi0_pins_default: ospi0-default-pins {
- bootph-all;
- pinctrl-single,pins = <
- AM62X_IOPAD(0x000, PIN_OUTPUT, 0) /* (H24) OSPI0_CLK */
- AM62X_IOPAD(0x02c, PIN_OUTPUT, 0) /* (F23) OSPI0_CSn0 */
- AM62X_IOPAD(0x00c, PIN_INPUT, 0) /* (E25) OSPI0_D0 */
- AM62X_IOPAD(0x010, PIN_INPUT, 0) /* (G24) OSPI0_D1 */
- AM62X_IOPAD(0x014, PIN_INPUT, 0) /* (F25) OSPI0_D2 */
- AM62X_IOPAD(0x018, PIN_INPUT, 0) /* (F24) OSPI0_D3 */
- AM62X_IOPAD(0x01c, PIN_INPUT, 0) /* (J23) OSPI0_D4 */
- AM62X_IOPAD(0x020, PIN_INPUT, 0) /* (J25) OSPI0_D5 */
- AM62X_IOPAD(0x024, PIN_INPUT, 0) /* (H25) OSPI0_D6 */
- AM62X_IOPAD(0x028, PIN_INPUT, 0) /* (J22) OSPI0_D7 */
- AM62X_IOPAD(0x008, PIN_INPUT, 0) /* (J24) OSPI0_DQS */
- >;
- };
-
- vdd_sd_dv_pins_default: vdd-sd-dv-default-pins {
- bootph-all;
- pinctrl-single,pins = <
- AM62X_IOPAD(0x07c, PIN_OUTPUT, 7) /* (P25) GPMC0_CLK.GPIO0_31 */
- >;
- };
-
- main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-default-pins {
- bootph-all;
- pinctrl-single,pins = <
- AM62X_IOPAD(0x01d4, PIN_INPUT, 7) /* (B15) UART0_RTSn.GPIO1_23 */
- >;
- };
-};
-
-&main_gpio0 {
- bootph-all;
-};
-
-&main_gpio1 {
- bootph-all;
-};
-
-&main_i2c1 {
- bootph-all;
- exp1: gpio@22 {
- bootph-all;
- compatible = "ti,tca6424";
- reg = <0x22>;
- gpio-controller;
- #gpio-cells = <2>;
- gpio-line-names = "GPIO_CPSW2_RST", "GPIO_CPSW1_RST",
- "PRU_DETECT", "MMC1_SD_EN",
- "VPP_LDO_EN", "EXP_PS_3V3_En",
- "EXP_PS_5V0_En", "EXP_HAT_DETECT",
- "GPIO_AUD_RSTn", "GPIO_eMMC_RSTn",
- "UART1_FET_BUF_EN", "WL_LT_EN",
- "GPIO_HDMI_RSTn", "CSI_GPIO1",
- "CSI_GPIO2", "PRU_3V3_EN",
- "HDMI_INTn", "PD_I2C_IRQ",
- "MCASP1_FET_EN", "MCASP1_BUF_BT_EN",
- "MCASP1_FET_SEL", "UART1_FET_SEL",
- "TSINT#", "IO_EXP_TEST_LED";
-
- interrupt-parent = <&main_gpio1>;
- interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
- interrupt-controller;
- #interrupt-cells = <2>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&main_gpio1_ioexp_intr_pins_default>;
- };
-};
-
-&sdhci1 {
- vmmc-supply = <&vdd_mmc1>;
- vqmmc-supply = <&vdd_sd_dv>;
-};
-
-&cpsw3g {
- pinctrl-names = "default";
- pinctrl-0 = <&main_rgmii1_pins_default>, <&main_rgmii2_pins_default>;
-};
-
-&cpsw_port2 {
- phy-mode = "rgmii-rxid";
- phy-handle = <&cpsw3g_phy1>;
-};
-
-&cpsw3g_mdio {
- cpsw3g_phy1: ethernet-phy@1 {
- reg = <1>;
- ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
- ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
- ti,min-output-impedance;
- };
-};
-
-&mailbox0_cluster0 {
- mbox_m4_0: mbox-m4-0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-};
-
-&fss {
- bootph-all;
-};
-
-&ospi0 {
- bootph-all;
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&ospi0_pins_default>;
-
- flash@0 {
- bootph-all;
- compatible = "jedec,spi-nor";
- reg = <0x0>;
- spi-tx-bus-width = <8>;
- spi-rx-bus-width = <8>;
- spi-max-frequency = <25000000>;
- cdns,tshsl-ns = <60>;
- cdns,tsd2d-ns = <60>;
- cdns,tchsh-ns = <60>;
- cdns,tslch-ns = <60>;
- cdns,read-delay = <4>;
-
- partitions {
- bootph-all;
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "ospi.tiboot3";
- reg = <0x0 0x80000>;
- };
-
- partition@80000 {
- label = "ospi.tispl";
- reg = <0x80000 0x200000>;
- };
-
- partition@280000 {
- label = "ospi.u-boot";
- reg = <0x280000 0x400000>;
- };
-
- partition@680000 {
- label = "ospi.env";
- reg = <0x680000 0x40000>;
- };
-
- partition@6c0000 {
- label = "ospi.env.backup";
- reg = <0x6c0000 0x40000>;
- };
-
- partition@800000 {
- label = "ospi.rootfs";
- reg = <0x800000 0x37c0000>;
- };
-
- partition@3fc0000 {
- bootph-pre-ram;
- label = "ospi.phypattern";
- reg = <0x3fc0000 0x40000>;
- };
- };
- };
-};
-
-&tlv320aic3106 {
- DVDD-supply = <&vcc_1v8>;
-};
diff --git a/arch/arm/dts/k3-am625.dtsi b/arch/arm/dts/k3-am625.dtsi
deleted file mode 100644
index 4014add6320d..000000000000
--- a/arch/arm/dts/k3-am625.dtsi
+++ /dev/null
@@ -1,155 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only OR MIT
-/*
- * Device Tree Source for AM625 SoC family in Quad core configuration
- *
- * TRM: https://www.ti.com/lit/pdf/spruiv7
- *
- * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-/dts-v1/;
-
-#include "k3-am62.dtsi"
-
-/ {
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu-map {
- cluster0: cluster0 {
- core0 {
- cpu = <&cpu0>;
- };
-
- core1 {
- cpu = <&cpu1>;
- };
-
- core2 {
- cpu = <&cpu2>;
- };
-
- core3 {
- cpu = <&cpu3>;
- };
- };
- };
-
- cpu0: cpu@0 {
- compatible = "arm,cortex-a53";
- reg = <0x000>;
- device_type = "cpu";
- enable-method = "psci";
- i-cache-size = <0x8000>;
- i-cache-line-size = <64>;
- i-cache-sets = <256>;
- d-cache-size = <0x8000>;
- d-cache-line-size = <64>;
- d-cache-sets = <128>;
- next-level-cache = <&L2_0>;
- operating-points-v2 = <&a53_opp_table>;
- clocks = <&k3_clks 135 0>;
- };
-
- cpu1: cpu@1 {
- compatible = "arm,cortex-a53";
- reg = <0x001>;
- device_type = "cpu";
- enable-method = "psci";
- i-cache-size = <0x8000>;
- i-cache-line-size = <64>;
- i-cache-sets = <256>;
- d-cache-size = <0x8000>;
- d-cache-line-size = <64>;
- d-cache-sets = <128>;
- next-level-cache = <&L2_0>;
- operating-points-v2 = <&a53_opp_table>;
- clocks = <&k3_clks 136 0>;
- };
-
- cpu2: cpu@2 {
- compatible = "arm,cortex-a53";
- reg = <0x002>;
- device_type = "cpu";
- enable-method = "psci";
- i-cache-size = <0x8000>;
- i-cache-line-size = <64>;
- i-cache-sets = <256>;
- d-cache-size = <0x8000>;
- d-cache-line-size = <64>;
- d-cache-sets = <128>;
- next-level-cache = <&L2_0>;
- operating-points-v2 = <&a53_opp_table>;
- clocks = <&k3_clks 137 0>;
- };
-
- cpu3: cpu@3 {
- compatible = "arm,cortex-a53";
- reg = <0x003>;
- device_type = "cpu";
- enable-method = "psci";
- i-cache-size = <0x8000>;
- i-cache-line-size = <64>;
- i-cache-sets = <256>;
- d-cache-size = <0x8000>;
- d-cache-line-size = <64>;
- d-cache-sets = <128>;
- next-level-cache = <&L2_0>;
- operating-points-v2 = <&a53_opp_table>;
- clocks = <&k3_clks 138 0>;
- };
- };
-
- a53_opp_table: opp-table {
- compatible = "operating-points-v2-ti-cpu";
- opp-shared;
- syscon = <&wkup_conf>;
-
- opp-200000000 {
- opp-hz = /bits/ 64 <200000000>;
- opp-supported-hw = <0x01 0x0007>;
- clock-latency-ns = <6000000>;
- };
-
- opp-400000000 {
- opp-hz = /bits/ 64 <400000000>;
- opp-supported-hw = <0x01 0x0007>;
- clock-latency-ns = <6000000>;
- };
-
- opp-600000000 {
- opp-hz = /bits/ 64 <600000000>;
- opp-supported-hw = <0x01 0x0007>;
- clock-latency-ns = <6000000>;
- };
-
- opp-800000000 {
- opp-hz = /bits/ 64 <800000000>;
- opp-supported-hw = <0x01 0x0007>;
- clock-latency-ns = <6000000>;
- };
-
- opp-1000000000 {
- opp-hz = /bits/ 64 <1000000000>;
- opp-supported-hw = <0x01 0x0006>;
- clock-latency-ns = <6000000>;
- };
-
- opp-1250000000 {
- opp-hz = /bits/ 64 <1250000000>;
- opp-supported-hw = <0x01 0x0004>;
- clock-latency-ns = <6000000>;
- opp-suspend;
- };
- };
-
- L2_0: l2-cache0 {
- compatible = "cache";
- cache-unified;
- cache-level = <2>;
- cache-size = <0x80000>;
- cache-line-size = <64>;
- cache-sets = <512>;
- };
-};
diff --git a/arch/arm/dts/k3-am62x-sk-common.dtsi b/arch/arm/dts/k3-am62x-sk-common.dtsi
deleted file mode 100644
index 3c45782ab2b7..000000000000
--- a/arch/arm/dts/k3-am62x-sk-common.dtsi
+++ /dev/null
@@ -1,535 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only OR MIT
-/*
- * Common dtsi for AM62x SK and derivatives
- *
- * Copyright (C) 2021-2024 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/net/ti-dp83867.h>
-#include "k3-am625.dtsi"
-
-/ {
- aliases {
- serial2 = &main_uart0;
- mmc0 = &sdhci0;
- mmc1 = &sdhci1;
- mmc2 = &sdhci2;
- spi0 = &ospi0;
- ethernet0 = &cpsw_port1;
- ethernet1 = &cpsw_port2;
- usb0 = &usb0;
- usb1 = &usb1;
- };
-
- chosen {
- stdout-path = "serial2:115200n8";
- };
-
- memory@80000000 {
- bootph-pre-ram;
- device_type = "memory";
- /* 2G RAM */
- reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
- };
-
- reserved-memory {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- ramoops@9ca00000 {
- compatible = "ramoops";
- reg = <0x00 0x9ca00000 0x00 0x00100000>;
- record-size = <0x8000>;
- console-size = <0x8000>;
- ftrace-size = <0x00>;
- pmsg-size = <0x8000>;
- };
-
- secure_tfa_ddr: tfa@9e780000 {
- reg = <0x00 0x9e780000 0x00 0x80000>;
- alignment = <0x1000>;
- no-map;
- };
-
- secure_ddr: optee@9e800000 {
- reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
- alignment = <0x1000>;
- no-map;
- };
-
- wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9db00000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0x9db00000 0x00 0xc00000>;
- no-map;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&usr_led_pins_default>;
-
- led-0 {
- label = "am62-sk:green:heartbeat";
- gpios = <&main_gpio1 49 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "heartbeat";
- function = LED_FUNCTION_HEARTBEAT;
- default-state = "off";
- };
- };
-
- tlv320_mclk: clk-0 {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <12288000>;
- };
-
- codec_audio: sound {
- compatible = "simple-audio-card";
- simple-audio-card,name = "AM62x-SKEVM";
- simple-audio-card,widgets =
- "Headphone", "Headphone Jack",
- "Line", "Line In",
- "Microphone", "Microphone Jack";
- simple-audio-card,routing =
- "Headphone Jack", "HPLOUT",
- "Headphone Jack", "HPROUT",
- "LINE1L", "Line In",
- "LINE1R", "Line In",
- "MIC3R", "Microphone Jack",
- "Microphone Jack", "Mic Bias";
- simple-audio-card,format = "dsp_b";
- simple-audio-card,bitclock-master = <&sound_master>;
- simple-audio-card,frame-master = <&sound_master>;
- simple-audio-card,bitclock-inversion;
-
- simple-audio-card,cpu {
- sound-dai = <&mcasp1>;
- };
-
- sound_master: simple-audio-card,codec {
- sound-dai = <&tlv320aic3106>;
- clocks = <&tlv320_mclk>;
- };
- };
-
- hdmi0: connector-hdmi {
- compatible = "hdmi-connector";
- label = "hdmi";
- type = "a";
- port {
- hdmi_connector_in: endpoint {
- remote-endpoint = <&sii9022_out>;
- };
- };
- };
-};
-
-&main_pmx0 {
- /* First pad number is ALW package and second is AMC package */
- main_uart0_pins_default: main-uart0-default-pins {
- bootph-all;
- pinctrl-single,pins = <
- AM62X_IOPAD(0x1c8, PIN_INPUT, 0) /* (D14/A13) UART0_RXD */
- AM62X_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (E14/E11) UART0_TXD */
- >;
- };
-
- main_uart1_pins_default: main-uart1-default-pins {
- bootph-pre-ram;
- pinctrl-single,pins = <
- AM62X_IOPAD(0x194, PIN_INPUT, 2) /* (B19/B18) MCASP0_AXR3.UART1_CTSn */
- AM62X_IOPAD(0x198, PIN_OUTPUT, 2) /* (A19/B17) MCASP0_AXR2.UART1_RTSn */
- AM62X_IOPAD(0x1ac, PIN_INPUT, 2) /* (E19/D15) MCASP0_AFSR.UART1_RXD */
- AM62X_IOPAD(0x1b0, PIN_OUTPUT, 2) /* (A20/D16) MCASP0_ACLKR.UART1_TXD */
- >;
- };
-
- main_i2c0_pins_default: main-i2c0-default-pins {
- pinctrl-single,pins = <
- AM62X_IOPAD(0x1e0, PIN_INPUT_PULLUP, 0) /* (B16/E12) I2C0_SCL */
- AM62X_IOPAD(0x1e4, PIN_INPUT_PULLUP, 0) /* (A16/D14) I2C0_SDA */
- >;
- };
-
- main_i2c1_pins_default: main-i2c1-default-pins {
- pinctrl-single,pins = <
- AM62X_IOPAD(0x1e8, PIN_INPUT_PULLUP, 0) /* (B17/A17) I2C1_SCL */
- AM62X_IOPAD(0x1ec, PIN_INPUT_PULLUP, 0) /* (A17/A16) I2C1_SDA */
- >;
- };
-
- main_i2c2_pins_default: main-i2c2-default-pins {
- pinctrl-single,pins = <
- AM62X_IOPAD(0x0b0, PIN_INPUT_PULLUP, 1) /* (K22/H18) GPMC0_CSn2.I2C2_SCL */
- AM62X_IOPAD(0x0b4, PIN_INPUT_PULLUP, 1) /* (K24/H19) GPMC0_CSn3.I2C2_SDA */
- >;
- };
-
- main_mmc0_pins_default: main-mmc0-default-pins {
- bootph-all;
- pinctrl-single,pins = <
- AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (Y3/V3) MMC0_CMD */
- AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (AB1/Y1) MMC0_CLK */
- AM62X_IOPAD(0x214, PIN_INPUT, 0) /* (AA2/V2) MMC0_DAT0 */
- AM62X_IOPAD(0x210, PIN_INPUT, 0) /* (AA1/V1) MMC0_DAT1 */
- AM62X_IOPAD(0x20c, PIN_INPUT, 0) /* (AA3/W2) MMC0_DAT2 */
- AM62X_IOPAD(0x208, PIN_INPUT, 0) /* (Y4/W1) MMC0_DAT3 */
- AM62X_IOPAD(0x204, PIN_INPUT, 0) /* (AB2/Y2) MMC0_DAT4 */
- AM62X_IOPAD(0x200, PIN_INPUT, 0) /* (AC1/W3) MMC0_DAT5 */
- AM62X_IOPAD(0x1fc, PIN_INPUT, 0) /* (AD2/W4) MMC0_DAT6 */
- AM62X_IOPAD(0x1f8, PIN_INPUT, 0) /* (AC2/V4) MMC0_DAT7 */
- >;
- };
-
- main_mmc1_pins_default: main-mmc1-default-pins {
- bootph-all;
- pinctrl-single,pins = <
- AM62X_IOPAD(0x23c, PIN_INPUT, 0) /* (A21/C18) MMC1_CMD */
- AM62X_IOPAD(0x234, PIN_INPUT, 0) /* (B22/A20) MMC1_CLK */
- AM62X_IOPAD(0x230, PIN_INPUT, 0) /* (A22/A19) MMC1_DAT0 */
- AM62X_IOPAD(0x22c, PIN_INPUT, 0) /* (B21/B19) MMC1_DAT1 */
- AM62X_IOPAD(0x228, PIN_INPUT, 0) /* (C21/B20) MMC1_DAT2 */
- AM62X_IOPAD(0x224, PIN_INPUT, 0) /* (D22/C19) MMC1_DAT3 */
- AM62X_IOPAD(0x240, PIN_INPUT, 0) /* (D17/C15) MMC1_SDCD */
- >;
- };
-
- usr_led_pins_default: usr-led-default-pins {
- pinctrl-single,pins = <
- AM62X_IOPAD(0x244, PIN_OUTPUT, 7) /* (C17/B15) MMC1_SDWP.GPIO1_49 */
- >;
- };
-
- main_mdio1_pins_default: main-mdio1-default-pins {
- pinctrl-single,pins = <
- AM62X_IOPAD(0x160, PIN_OUTPUT, 0) /* (AD24/V17) MDIO0_MDC */
- AM62X_IOPAD(0x15c, PIN_INPUT, 0) /* (AB22/U16) MDIO0_MDIO */
- >;
- };
-
- main_rgmii1_pins_default: main-rgmii1-default-pins {
- bootph-all;
- pinctrl-single,pins = <
- AM62X_IOPAD(0x14c, PIN_INPUT, 0) /* (AB17/W15) RGMII1_RD0 */
- AM62X_IOPAD(0x150, PIN_INPUT, 0) /* (AC17/Y16) RGMII1_RD1 */
- AM62X_IOPAD(0x154, PIN_INPUT, 0) /* (AB16/AA17) RGMII1_RD2 */
- AM62X_IOPAD(0x158, PIN_INPUT, 0) /* (AA15/Y15) RGMII1_RD3 */
- AM62X_IOPAD(0x148, PIN_INPUT, 0) /* (AD17/AA16) RGMII1_RXC */
- AM62X_IOPAD(0x144, PIN_INPUT, 0) /* (AE17/W14) RGMII1_RX_CTL */
- AM62X_IOPAD(0x134, PIN_OUTPUT, 0) /* (AE20/U14) RGMII1_TD0 */
- AM62X_IOPAD(0x138, PIN_OUTPUT, 0) /* (AD20/AA19) RGMII1_TD1 */
- AM62X_IOPAD(0x13c, PIN_OUTPUT, 0) /* (AE18/Y17) RGMII1_TD2 */
- AM62X_IOPAD(0x140, PIN_OUTPUT, 0) /* (AD18/AA18) RGMII1_TD3 */
- AM62X_IOPAD(0x130, PIN_OUTPUT, 0) /* (AE19/W16) RGMII1_TXC */
- AM62X_IOPAD(0x12c, PIN_OUTPUT, 0) /* (AD19/V15) RGMII1_TX_CTL */
- >;
- };
-
- main_usb1_pins_default: main-usb1-default-pins {
- pinctrl-single,pins = <
- AM62X_IOPAD(0x0258, PIN_OUTPUT, 0) /* (F18/E16) USB1_DRVVBUS */
- >;
- };
-
- main_mcasp1_pins_default: main-mcasp1-default-pins {
- pinctrl-single,pins = <
- AM62X_IOPAD(0x090, PIN_INPUT, 2) /* (M24/K17) GPMC0_BE0N_CLE.MCASP1_ACLKX */
- AM62X_IOPAD(0x098, PIN_INPUT, 2) /* (U23/P21) GPMC0_WAIT0.MCASP1_AFSX */
- AM62X_IOPAD(0x08c, PIN_OUTPUT, 2) /* (L25/J17) GPMC0_WEN.MCASP1_AXR0 */
- AM62X_IOPAD(0x084, PIN_INPUT, 2) /* (L23/K20) GPMC0_ADVN_ALE.MCASP1_AXR2 */
- >;
- };
-
- main_dss0_pins_default: main-dss0-default-pins {
- pinctrl-single,pins = <
- AM62X_IOPAD(0x100, PIN_OUTPUT, 0) /* (AC25) VOUT0_VSYNC */
- AM62X_IOPAD(0x0f8, PIN_OUTPUT, 0) /* (AB24) VOUT0_HSYNC */
- AM62X_IOPAD(0x104, PIN_OUTPUT, 0) /* (AC24) VOUT0_PCLK */
- AM62X_IOPAD(0x0fc, PIN_OUTPUT, 0) /* (Y20) VOUT0_DE */
- AM62X_IOPAD(0x0b8, PIN_OUTPUT, 0) /* (U22) VOUT0_DATA0 */
- AM62X_IOPAD(0x0bc, PIN_OUTPUT, 0) /* (V24) VOUT0_DATA1 */
- AM62X_IOPAD(0x0c0, PIN_OUTPUT, 0) /* (W25) VOUT0_DATA2 */
- AM62X_IOPAD(0x0c4, PIN_OUTPUT, 0) /* (W24) VOUT0_DATA3 */
- AM62X_IOPAD(0x0c8, PIN_OUTPUT, 0) /* (Y25) VOUT0_DATA4 */
- AM62X_IOPAD(0x0cc, PIN_OUTPUT, 0) /* (Y24) VOUT0_DATA5 */
- AM62X_IOPAD(0x0d0, PIN_OUTPUT, 0) /* (Y23) VOUT0_DATA6 */
- AM62X_IOPAD(0x0d4, PIN_OUTPUT, 0) /* (AA25) VOUT0_DATA7 */
- AM62X_IOPAD(0x0d8, PIN_OUTPUT, 0) /* (V21) VOUT0_DATA8 */
- AM62X_IOPAD(0x0dc, PIN_OUTPUT, 0) /* (W21) VOUT0_DATA9 */
- AM62X_IOPAD(0x0e0, PIN_OUTPUT, 0) /* (V20) VOUT0_DATA10 */
- AM62X_IOPAD(0x0e4, PIN_OUTPUT, 0) /* (AA23) VOUT0_DATA11 */
- AM62X_IOPAD(0x0e8, PIN_OUTPUT, 0) /* (AB25) VOUT0_DATA12 */
- AM62X_IOPAD(0x0ec, PIN_OUTPUT, 0) /* (AA24) VOUT0_DATA13 */
- AM62X_IOPAD(0x0f0, PIN_OUTPUT, 0) /* (Y22) VOUT0_DATA14 */
- AM62X_IOPAD(0x0f4, PIN_OUTPUT, 0) /* (AA21) VOUT0_DATA15 */
- AM62X_IOPAD(0x05c, PIN_OUTPUT, 1) /* (R24) GPMC0_AD8.VOUT0_DATA16 */
- AM62X_IOPAD(0x060, PIN_OUTPUT, 1) /* (R25) GPMC0_AD9.VOUT0_DATA17 */
- AM62X_IOPAD(0x064, PIN_OUTPUT, 1) /* (T25) GPMC0_AD10.VOUT0_DATA18 */
- AM62X_IOPAD(0x068, PIN_OUTPUT, 1) /* (R21) GPMC0_AD11.VOUT0_DATA19 */
- AM62X_IOPAD(0x06c, PIN_OUTPUT, 1) /* (T22) GPMC0_AD12.VOUT0_DATA20 */
- AM62X_IOPAD(0x070, PIN_OUTPUT, 1) /* (T24) GPMC0_AD13.VOUT0_DATA21 */
- AM62X_IOPAD(0x074, PIN_OUTPUT, 1) /* (U25) GPMC0_AD14.VOUT0_DATA22 */
- AM62X_IOPAD(0x078, PIN_OUTPUT, 1) /* (U24) GPMC0_AD15.VOUT0_DATA23 */
- >;
- };
-};
-
-&mcu_pmx0 {
- wkup_uart0_pins_default: wkup-uart0-default-pins {
- bootph-pre-ram;
- pinctrl-single,pins = <
- AM62X_MCU_IOPAD(0x02c, PIN_INPUT, 0) /* (C6/A7) WKUP_UART0_CTSn */
- AM62X_MCU_IOPAD(0x030, PIN_OUTPUT, 0) /* (A4/B4) WKUP_UART0_RTSn */
- AM62X_MCU_IOPAD(0x024, PIN_INPUT, 0) /* (B4/B5) WKUP_UART0_RXD */
- AM62X_MCU_IOPAD(0x028, PIN_OUTPUT, 0) /* (C5/C6) WKUP_UART0_TXD */
- >;
- };
-};
-
-&wkup_uart0 {
- /* WKUP UART0 is used by DM firmware */
- bootph-pre-ram;
- status = "reserved";
- pinctrl-names = "default";
- pinctrl-0 = <&wkup_uart0_pins_default>;
-};
-
-&main_uart0 {
- bootph-all;
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&main_uart0_pins_default>;
-};
-
-&main_uart1 {
- /* Main UART1 is used by TIFS firmware */
- bootph-pre-ram;
- status = "reserved";
- pinctrl-names = "default";
- pinctrl-0 = <&main_uart1_pins_default>;
-};
-
-&main_i2c0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&main_i2c0_pins_default>;
- clock-frequency = <400000>;
-
- eeprom@51 {
- /* AT24C512C-MAHM-T or M24512-DFMC6TG */
- compatible = "atmel,24c512";
- reg = <0x51>;
- };
-
- typec_pd0: tps6598x@3f {
- compatible = "ti,tps6598x";
- reg = <0x3f>;
-
- connector {
- compatible = "usb-c-connector";
- label = "USB-C";
- self-powered;
- data-role = "dual";
- power-role = "sink";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- usb_con_hs: endpoint {
- remote-endpoint = <&usb0_hs_ep>;
- };
- };
- };
- };
- };
-};
-
-&main_i2c1 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&main_i2c1_pins_default>;
- clock-frequency = <100000>;
-
- tlv320aic3106: audio-codec@1b {
- #sound-dai-cells = <0>;
- compatible = "ti,tlv320aic3106";
- reg = <0x1b>;
- ai3x-micbias-vg = <1>; /* 2.0V */
-
- /* Regulators */
- AVDD-supply = <&vcc_3v3_sys>;
- IOVDD-supply = <&vcc_3v3_sys>;
- DRVDD-supply = <&vcc_3v3_sys>;
- };
-
- sii9022: bridge-hdmi@3b {
- compatible = "sil,sii9022";
- reg = <0x3b>;
- interrupt-parent = <&exp1>;
- interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
- #sound-dai-cells = <0>;
- sil,i2s-data-lanes = < 0 >;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
-
- sii9022_in: endpoint {
- remote-endpoint = <&dpi1_out>;
- };
- };
-
- port@1 {
- reg = <1>;
-
- sii9022_out: endpoint {
- remote-endpoint = <&hdmi_connector_in>;
- };
- };
- };
- };
-};
-
-&main_i2c2 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&main_i2c2_pins_default>;
- clock-frequency = <400000>;
-};
-
-&sdhci0 {
- bootph-all;
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&main_mmc0_pins_default>;
- disable-wp;
-};
-
-&sdhci1 {
- /* SD/MMC */
- bootph-all;
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&main_mmc1_pins_default>;
- disable-wp;
-};
-
-&cpsw3g {
- bootph-all;
- pinctrl-names = "default";
- pinctrl-0 = <&main_rgmii1_pins_default>;
-};
-
-&cpsw_port1 {
- bootph-all;
- phy-mode = "rgmii-rxid";
- phy-handle = <&cpsw3g_phy0>;
-};
-
-&cpsw3g_mdio {
- bootph-all;
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&main_mdio1_pins_default>;
-
- cpsw3g_phy0: ethernet-phy@0 {
- bootph-all;
- reg = <0>;
- ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
- ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
- ti,min-output-impedance;
- };
-};
-
-&mailbox0_cluster0 {
- mbox_m4_0: mbox-m4-0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-};
-
-&usbss0 {
- bootph-all;
- status = "okay";
- ti,vbus-divider;
-};
-
-&usbss1 {
- status = "okay";
- ti,vbus-divider;
-};
-
-&usb0 {
- bootph-all;
- #address-cells = <1>;
- #size-cells = <0>;
- usb-role-switch;
-
- port@0 {
- reg = <0>;
- usb0_hs_ep: endpoint {
- remote-endpoint = <&usb_con_hs>;
- };
- };
-};
-
-&usb1 {
- dr_mode = "host";
- pinctrl-names = "default";
- pinctrl-0 = <&main_usb1_pins_default>;
-};
-
-&mcasp1 {
- status = "okay";
- #sound-dai-cells = <0>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&main_mcasp1_pins_default>;
-
- op-mode = <0>; /* MCASP_IIS_MODE */
- tdm-slots = <2>;
-
- serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
- 1 0 2 0
- 0 0 0 0
- 0 0 0 0
- 0 0 0 0
- >;
- tx-num-evt = <32>;
- rx-num-evt = <32>;
-};
-
-&dss {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&main_dss0_pins_default>;
-};
-
-&dss_ports {
- /* VP2: DPI Output */
- port@1 {
- reg = <1>;
-
- dpi1_out: endpoint {
- remote-endpoint = <&sii9022_in>;
- };
- };
-};
-
-/* mcu_gpio0 and mcu_gpio_intr are reserved for mcu firmware usage */
-&mcu_gpio0 {
- status = "reserved";
-};
-
-&mcu_gpio_intr {
- status = "reserved";
-};
diff --git a/configs/am62x_evm_a53_defconfig b/configs/am62x_evm_a53_defconfig
index 16294a6a7940..9bfe1560275c 100644
--- a/configs/am62x_evm_a53_defconfig
+++ b/configs/am62x_evm_a53_defconfig
@@ -10,7 +10,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80b80000
CONFIG_SF_DEFAULT_SPEED=25000000
CONFIG_SPL_DM_SPI=y
-CONFIG_DEFAULT_DEVICE_TREE="k3-am625-sk"
+CONFIG_DEFAULT_DEVICE_TREE="ti/k3-am625-sk"
CONFIG_SPL_TEXT_BASE=0x80080000
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_DM_RESET=y
@@ -56,6 +56,7 @@ CONFIG_CMD_EFIDEBUG=y
CONFIG_MMC_SPEED_MODE_SET=y
CONFIG_OF_CONTROL=y
CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_UPSTREAM=y
CONFIG_MULTI_DTB_FIT=y
CONFIG_SPL_MULTI_DTB_FIT=y
CONFIG_SPL_MULTI_DTB_FIT_NO_COMPRESSION=y
--
2.43.0
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH 3/3] arm: dts: am62a7_sk: Switch to OF_UPSTREAM
2024-06-05 15:27 [PATCH 0/3] arm: dts: am625/am62a7: Switch over to OF_UPSTREAM Nishanth Menon
2024-06-05 15:27 ` [PATCH 1/3] arm: dts: am625_beagleplay: Switch " Nishanth Menon
2024-06-05 15:27 ` [PATCH 2/3] arm: dts: am625_sk: " Nishanth Menon
@ 2024-06-05 15:27 ` Nishanth Menon
2024-06-05 18:41 ` [PATCH 0/3] arm: dts: am625/am62a7: Switch over " Dhruva Gole
` (2 subsequent siblings)
5 siblings, 0 replies; 9+ messages in thread
From: Nishanth Menon @ 2024-06-05 15:27 UTC (permalink / raw)
To: Tom Rini
Cc: Dhruva Gole, Bryan Brattlof, Vignesh Raghavendra, Robert Nelson,
u-boot, Nishanth Menon
Enable OF_UPSTREAM for am62a7-sk board. Remove DT files that
are now available in dts/upstream. Update the appended files based on
version of latest OF_UPSTREAM sync point (v6.10-rc1).
Signed-off-by: Nishanth Menon <nm@ti.com>
---
arch/arm/dts/Makefile | 3 +-
arch/arm/dts/k3-am62a-main.dtsi | 1054 --------------------------
arch/arm/dts/k3-am62a-mcu.dtsi | 170 -----
arch/arm/dts/k3-am62a-sk-binman.dtsi | 2 +-
arch/arm/dts/k3-am62a-thermal.dtsi | 50 --
arch/arm/dts/k3-am62a-wakeup.dtsi | 73 --
arch/arm/dts/k3-am62a.dtsi | 125 ---
arch/arm/dts/k3-am62a7-sk.dts | 702 -----------------
configs/am62ax_evm_a53_defconfig | 3 +-
9 files changed, 4 insertions(+), 2178 deletions(-)
delete mode 100644 arch/arm/dts/k3-am62a-main.dtsi
delete mode 100644 arch/arm/dts/k3-am62a-mcu.dtsi
delete mode 100644 arch/arm/dts/k3-am62a-thermal.dtsi
delete mode 100644 arch/arm/dts/k3-am62a-wakeup.dtsi
delete mode 100644 arch/arm/dts/k3-am62a.dtsi
delete mode 100644 arch/arm/dts/k3-am62a7-sk.dts
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 5b0bcf336924..27f38908f268 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -1203,8 +1203,7 @@ dtb-$(CONFIG_SOC_K3_AM625) += k3-am625-r5-sk.dtb \
k3-am625-verdin-r5.dtb \
k3-am625-r5-phycore-som-2gb.dtb
-dtb-$(CONFIG_SOC_K3_AM62A7) += k3-am62a7-sk.dtb \
- k3-am62a7-r5-sk.dtb
+dtb-$(CONFIG_SOC_K3_AM62A7) += k3-am62a7-r5-sk.dtb
dtb-$(CONFIG_SOC_K3_AM62P5) += k3-am62p5-r5-sk.dtb
diff --git a/arch/arm/dts/k3-am62a-main.dtsi b/arch/arm/dts/k3-am62a-main.dtsi
deleted file mode 100644
index aa1e057082f0..000000000000
--- a/arch/arm/dts/k3-am62a-main.dtsi
+++ /dev/null
@@ -1,1054 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only OR MIT
-/*
- * Device Tree Source for AM62A SoC Family Main Domain peripherals
- *
- * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-&cbass_main {
- oc_sram: sram@70000000 {
- compatible = "mmio-sram";
- reg = <0x00 0x70000000 0x00 0x10000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x00 0x70000000 0x10000>;
- };
-
- gic500: interrupt-controller@1800000 {
- compatible = "arm,gic-v3";
- reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */
- <0x00 0x01880000 0x00 0xc0000>, /* GICR */
- <0x00 0x01880000 0x00 0xc0000>, /* GICR */
- <0x01 0x00000000 0x00 0x2000>, /* GICC */
- <0x01 0x00010000 0x00 0x1000>, /* GICH */
- <0x01 0x00020000 0x00 0x2000>; /* GICV */
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
- #interrupt-cells = <3>;
- interrupt-controller;
- /*
- * vcpumntirq:
- * virtual CPU interface maintenance interrupt
- */
- interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
-
- gic_its: msi-controller@1820000 {
- compatible = "arm,gic-v3-its";
- reg = <0x00 0x01820000 0x00 0x10000>;
- socionext,synquacer-pre-its = <0x1000000 0x400000>;
- msi-controller;
- #msi-cells = <1>;
- };
- };
-
- main_conf: bus@100000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x00 0x00 0x00100000 0x20000>;
-
- phy_gmii_sel: phy@4044 {
- compatible = "ti,am654-phy-gmii-sel";
- reg = <0x4044 0x8>;
- #phy-cells = <1>;
- };
-
- epwm_tbclk: clock-controller@4130 {
- compatible = "ti,am62-epwm-tbclk";
- reg = <0x4130 0x4>;
- #clock-cells = <1>;
- };
- };
-
- dmss: bus@48000000 {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <2>;
- dma-ranges;
- ranges = <0x00 0x48000000 0x00 0x48000000 0x00 0x06000000>;
-
- ti,sci-dev-id = <25>;
-
- secure_proxy_main: mailbox@4d000000 {
- compatible = "ti,am654-secure-proxy";
- reg = <0x00 0x4d000000 0x00 0x80000>,
- <0x00 0x4a600000 0x00 0x80000>,
- <0x00 0x4a400000 0x00 0x80000>;
- reg-names = "target_data", "rt", "scfg";
- #mbox-cells = <1>;
- interrupt-names = "rx_012";
- interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- inta_main_dmss: interrupt-controller@48000000 {
- compatible = "ti,sci-inta";
- reg = <0x00 0x48000000 0x00 0x100000>;
- #interrupt-cells = <0>;
- interrupt-controller;
- interrupt-parent = <&gic500>;
- msi-controller;
- ti,sci = <&dmsc>;
- ti,sci-dev-id = <28>;
- ti,interrupt-ranges = <6 70 34>;
- ti,unmapped-event-sources = <&main_bcdma>, <&main_pktdma>;
- };
-
- main_bcdma: dma-controller@485c0100 {
- compatible = "ti,am64-dmss-bcdma";
- reg = <0x00 0x485c0100 0x00 0x100>,
- <0x00 0x4c000000 0x00 0x20000>,
- <0x00 0x4a820000 0x00 0x20000>,
- <0x00 0x4aa40000 0x00 0x20000>,
- <0x00 0x4bc00000 0x00 0x100000>,
- <0x00 0x48600000 0x00 0x8000>,
- <0x00 0x484a4000 0x00 0x2000>,
- <0x00 0x484c2000 0x00 0x2000>,
- <0x00 0x48420000 0x00 0x2000>;
- reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt",
- "ring", "tchan", "rchan", "bchan";
- msi-parent = <&inta_main_dmss>;
- #dma-cells = <3>;
- ti,sci = <&dmsc>;
- ti,sci-dev-id = <26>;
- ti,sci-rm-range-bchan = <0x20>; /* BLOCK_COPY_CHAN */
- ti,sci-rm-range-rchan = <0x21>; /* SPLIT_TR_RX_CHAN */
- ti,sci-rm-range-tchan = <0x22>; /* SPLIT_TR_TX_CHAN */
- };
-
- main_pktdma: dma-controller@485c0000 {
- compatible = "ti,am64-dmss-pktdma";
- reg = <0x00 0x485c0000 0x00 0x100>,
- <0x00 0x4a800000 0x00 0x20000>,
- <0x00 0x4aa00000 0x00 0x40000>,
- <0x00 0x4b800000 0x00 0x400000>,
- <0x00 0x485e0000 0x00 0x10000>,
- <0x00 0x484a0000 0x00 0x2000>,
- <0x00 0x484c0000 0x00 0x2000>,
- <0x00 0x48430000 0x00 0x1000>;
- reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt",
- "ring", "tchan", "rchan", "rflow";
- msi-parent = <&inta_main_dmss>;
- #dma-cells = <2>;
- ti,sci = <&dmsc>;
- ti,sci-dev-id = <30>;
- ti,sci-rm-range-tchan = <0x23>, /* UNMAPPED_TX_CHAN */
- <0x24>, /* CPSW_TX_CHAN */
- <0x25>, /* SAUL_TX_0_CHAN */
- <0x26>; /* SAUL_TX_1_CHAN */
- ti,sci-rm-range-tflow = <0x10>, /* RING_UNMAPPED_TX_CHAN */
- <0x11>, /* RING_CPSW_TX_CHAN */
- <0x12>, /* RING_SAUL_TX_0_CHAN */
- <0x13>; /* RING_SAUL_TX_1_CHAN */
- ti,sci-rm-range-rchan = <0x29>, /* UNMAPPED_RX_CHAN */
- <0x2b>, /* CPSW_RX_CHAN */
- <0x2d>, /* SAUL_RX_0_CHAN */
- <0x2f>, /* SAUL_RX_1_CHAN */
- <0x31>, /* SAUL_RX_2_CHAN */
- <0x33>; /* SAUL_RX_3_CHAN */
- ti,sci-rm-range-rflow = <0x2a>, /* FLOW_UNMAPPED_RX_CHAN */
- <0x2c>, /* FLOW_CPSW_RX_CHAN */
- <0x2e>, /* FLOW_SAUL_RX_0/1_CHAN */
- <0x32>; /* FLOW_SAUL_RX_2/3_CHAN */
- };
- };
-
- dmss_csi: bus@4e000000 {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <2>;
- dma-ranges;
- ranges = <0x00 0x4e000000 0x00 0x4e000000 0x00 0x300000>;
-
- ti,sci-dev-id = <198>;
-
- inta_main_dmss_csi: interrupt-controller@4e0a0000 {
- compatible = "ti,sci-inta";
- reg = <0x00 0x4e0a0000 0x00 0x8000>;
- #interrupt-cells = <0>;
- interrupt-controller;
- interrupt-parent = <&gic500>;
- msi-controller;
- ti,sci = <&dmsc>;
- ti,sci-dev-id = <200>;
- ti,interrupt-ranges = <0 237 8>;
- ti,unmapped-event-sources = <&main_bcdma_csi>;
- power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>;
- };
-
- main_bcdma_csi: dma-controller@4e230000 {
- compatible = "ti,am62a-dmss-bcdma-csirx";
- reg = <0x00 0x4e230000 0x00 0x100>,
- <0x00 0x4e180000 0x00 0x8000>,
- <0x00 0x4e100000 0x00 0x10000>;
- reg-names = "gcfg", "rchanrt", "ringrt";
- msi-parent = <&inta_main_dmss_csi>;
- #dma-cells = <3>;
- ti,sci = <&dmsc>;
- ti,sci-dev-id = <199>;
- ti,sci-rm-range-rchan = <0x21>;
- power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>;
- };
- };
-
- dmsc: system-controller@44043000 {
- compatible = "ti,k2g-sci";
- reg = <0x00 0x44043000 0x00 0xfe0>;
- reg-names = "debug_messages";
- ti,host-id = <12>;
- mbox-names = "rx", "tx";
- mboxes = <&secure_proxy_main 12>,
- <&secure_proxy_main 13>;
-
- k3_pds: power-controller {
- compatible = "ti,sci-pm-domain";
- #power-domain-cells = <2>;
- };
-
- k3_clks: clock-controller {
- compatible = "ti,k2g-sci-clk";
- #clock-cells = <2>;
- };
-
- k3_reset: reset-controller {
- compatible = "ti,sci-reset";
- #reset-cells = <2>;
- };
- };
-
- secure_proxy_sa3: mailbox@43600000 {
- compatible = "ti,am654-secure-proxy";
- #mbox-cells = <1>;
- reg-names = "target_data", "rt", "scfg";
- reg = <0x00 0x43600000 0x00 0x10000>,
- <0x00 0x44880000 0x00 0x20000>,
- <0x00 0x44860000 0x00 0x20000>;
- /*
- * Marked Disabled:
- * Node is incomplete as it is meant for bootloaders and
- * firmware on non-MPU processors
- */
- status = "disabled";
- };
-
- main_pmx0: pinctrl@f4000 {
- compatible = "pinctrl-single";
- reg = <0x00 0xf4000 0x00 0x2ac>;
- #pinctrl-cells = <1>;
- pinctrl-single,register-width = <32>;
- pinctrl-single,function-mask = <0xffffffff>;
- };
-
- main_timer0: timer@2400000 {
- compatible = "ti,am654-timer";
- reg = <0x00 0x2400000 0x00 0x400>;
- interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&k3_clks 36 2>;
- clock-names = "fck";
- assigned-clocks = <&k3_clks 36 2>;
- assigned-clock-parents = <&k3_clks 36 3>;
- power-domains = <&k3_pds 36 TI_SCI_PD_EXCLUSIVE>;
- ti,timer-pwm;
- };
-
- main_timer1: timer@2410000 {
- compatible = "ti,am654-timer";
- reg = <0x00 0x2410000 0x00 0x400>;
- interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&k3_clks 37 2>;
- clock-names = "fck";
- assigned-clocks = <&k3_clks 37 2>;
- assigned-clock-parents = <&k3_clks 37 3>;
- power-domains = <&k3_pds 37 TI_SCI_PD_EXCLUSIVE>;
- ti,timer-pwm;
- };
-
- main_timer2: timer@2420000 {
- compatible = "ti,am654-timer";
- reg = <0x00 0x2420000 0x00 0x400>;
- interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&k3_clks 38 2>;
- clock-names = "fck";
- assigned-clocks = <&k3_clks 38 2>;
- assigned-clock-parents = <&k3_clks 38 3>;
- power-domains = <&k3_pds 38 TI_SCI_PD_EXCLUSIVE>;
- ti,timer-pwm;
- };
-
- main_timer3: timer@2430000 {
- compatible = "ti,am654-timer";
- reg = <0x00 0x2430000 0x00 0x400>;
- interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&k3_clks 39 2>;
- clock-names = "fck";
- assigned-clocks = <&k3_clks 39 2>;
- assigned-clock-parents = <&k3_clks 39 3>;
- power-domains = <&k3_pds 39 TI_SCI_PD_EXCLUSIVE>;
- ti,timer-pwm;
- };
-
- main_timer4: timer@2440000 {
- compatible = "ti,am654-timer";
- reg = <0x00 0x2440000 0x00 0x400>;
- interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&k3_clks 40 2>;
- clock-names = "fck";
- assigned-clocks = <&k3_clks 40 2>;
- assigned-clock-parents = <&k3_clks 40 3>;
- power-domains = <&k3_pds 40 TI_SCI_PD_EXCLUSIVE>;
- ti,timer-pwm;
- };
-
- main_timer5: timer@2450000 {
- compatible = "ti,am654-timer";
- reg = <0x00 0x2450000 0x00 0x400>;
- interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&k3_clks 41 2>;
- clock-names = "fck";
- assigned-clocks = <&k3_clks 41 2>;
- assigned-clock-parents = <&k3_clks 41 3>;
- power-domains = <&k3_pds 41 TI_SCI_PD_EXCLUSIVE>;
- ti,timer-pwm;
- };
-
- main_timer6: timer@2460000 {
- compatible = "ti,am654-timer";
- reg = <0x00 0x2460000 0x00 0x400>;
- interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&k3_clks 42 2>;
- clock-names = "fck";
- assigned-clocks = <&k3_clks 42 2>;
- assigned-clock-parents = <&k3_clks 42 3>;
- power-domains = <&k3_pds 42 TI_SCI_PD_EXCLUSIVE>;
- ti,timer-pwm;
- };
-
- main_timer7: timer@2470000 {
- compatible = "ti,am654-timer";
- reg = <0x00 0x2470000 0x00 0x400>;
- interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&k3_clks 43 2>;
- clock-names = "fck";
- assigned-clocks = <&k3_clks 43 2>;
- assigned-clock-parents = <&k3_clks 43 3>;
- power-domains = <&k3_pds 43 TI_SCI_PD_EXCLUSIVE>;
- ti,timer-pwm;
- };
-
- main_uart0: serial@2800000 {
- compatible = "ti,am64-uart", "ti,am654-uart";
- reg = <0x00 0x02800000 0x00 0x100>;
- interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 146 0>;
- clock-names = "fclk";
- status = "disabled";
- };
-
- main_uart1: serial@2810000 {
- compatible = "ti,am64-uart", "ti,am654-uart";
- reg = <0x00 0x02810000 0x00 0x100>;
- interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 152 0>;
- clock-names = "fclk";
- status = "disabled";
- };
-
- main_uart2: serial@2820000 {
- compatible = "ti,am64-uart", "ti,am654-uart";
- reg = <0x00 0x02820000 0x00 0x100>;
- interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&k3_pds 153 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 153 0>;
- clock-names = "fclk";
- status = "disabled";
- };
-
- main_uart3: serial@2830000 {
- compatible = "ti,am64-uart", "ti,am654-uart";
- reg = <0x00 0x02830000 0x00 0x100>;
- interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 154 0>;
- clock-names = "fclk";
- status = "disabled";
- };
-
- main_uart4: serial@2840000 {
- compatible = "ti,am64-uart", "ti,am654-uart";
- reg = <0x00 0x02840000 0x00 0x100>;
- interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&k3_pds 155 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 155 0>;
- clock-names = "fclk";
- status = "disabled";
- };
-
- main_uart5: serial@2850000 {
- compatible = "ti,am64-uart", "ti,am654-uart";
- reg = <0x00 0x02850000 0x00 0x100>;
- interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&k3_pds 156 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 156 0>;
- clock-names = "fclk";
- status = "disabled";
- };
-
- main_uart6: serial@2860000 {
- compatible = "ti,am64-uart", "ti,am654-uart";
- reg = <0x00 0x02860000 0x00 0x100>;
- interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&k3_pds 158 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 158 0>;
- clock-names = "fclk";
- status = "disabled";
- };
-
- main_i2c0: i2c@20000000 {
- compatible = "ti,am64-i2c", "ti,omap4-i2c";
- reg = <0x00 0x20000000 0x00 0x100>;
- interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 102 2>;
- clock-names = "fck";
- status = "disabled";
- };
-
- main_i2c1: i2c@20010000 {
- compatible = "ti,am64-i2c", "ti,omap4-i2c";
- reg = <0x00 0x20010000 0x00 0x100>;
- interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 103 2>;
- clock-names = "fck";
- status = "disabled";
- };
-
- main_i2c2: i2c@20020000 {
- compatible = "ti,am64-i2c", "ti,omap4-i2c";
- reg = <0x00 0x20020000 0x00 0x100>;
- interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 104 2>;
- clock-names = "fck";
- status = "disabled";
- };
-
- main_i2c3: i2c@20030000 {
- compatible = "ti,am64-i2c", "ti,omap4-i2c";
- reg = <0x00 0x20030000 0x00 0x100>;
- interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 105 2>;
- clock-names = "fck";
- status = "disabled";
- };
-
- main_spi0: spi@20100000 {
- compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
- reg = <0x00 0x20100000 0x00 0x400>;
- interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- power-domains = <&k3_pds 141 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 141 0>;
- status = "disabled";
- };
-
- main_spi1: spi@20110000 {
- compatible = "ti,am654-mcspi","ti,omap4-mcspi";
- reg = <0x00 0x20110000 0x00 0x400>;
- interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- power-domains = <&k3_pds 142 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 142 0>;
- status = "disabled";
- };
-
- main_spi2: spi@20120000 {
- compatible = "ti,am654-mcspi","ti,omap4-mcspi";
- reg = <0x00 0x20120000 0x00 0x400>;
- interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- power-domains = <&k3_pds 143 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 143 0>;
- status = "disabled";
- };
-
- main_gpio_intr: interrupt-controller@a00000 {
- compatible = "ti,sci-intr";
- reg = <0x00 0x00a00000 0x00 0x800>;
- ti,intr-trigger-type = <1>;
- interrupt-controller;
- interrupt-parent = <&gic500>;
- #interrupt-cells = <1>;
- ti,sci = <&dmsc>;
- ti,sci-dev-id = <3>;
- ti,interrupt-ranges = <0 32 16>;
- status = "disabled";
- };
-
- main_gpio0: gpio@600000 {
- compatible = "ti,am64-gpio", "ti,keystone-gpio";
- reg = <0x00 0x00600000 0x0 0x100>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-parent = <&main_gpio_intr>;
- interrupts = <190>, <191>, <192>,
- <193>, <194>, <195>;
- interrupt-controller;
- #interrupt-cells = <2>;
- ti,ngpio = <92>;
- ti,davinci-gpio-unbanked = <0>;
- power-domains = <&k3_pds 77 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 77 0>;
- clock-names = "gpio";
- status = "disabled";
- };
-
- main_gpio1: gpio@601000 {
- compatible = "ti,am64-gpio", "ti,keystone-gpio";
- reg = <0x00 0x00601000 0x0 0x100>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-parent = <&main_gpio_intr>;
- interrupts = <180>, <181>, <182>,
- <183>, <184>, <185>;
- interrupt-controller;
- #interrupt-cells = <2>;
- ti,ngpio = <52>;
- ti,davinci-gpio-unbanked = <0>;
- power-domains = <&k3_pds 78 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 78 0>;
- clock-names = "gpio";
- status = "disabled";
- };
-
- sdhci0: mmc@fa10000 {
- compatible = "ti,am62-sdhci";
- reg = <0x00 0xfa10000 0x00 0x260>, <0x00 0xfa18000 0x00 0x134>;
- interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&k3_pds 57 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 57 5>, <&k3_clks 57 6>;
- clock-names = "clk_ahb", "clk_xin";
- assigned-clocks = <&k3_clks 57 6>;
- assigned-clock-parents = <&k3_clks 57 8>;
- bus-width = <8>;
- mmc-hs200-1_8v;
- ti,clkbuf-sel = <0x7>;
- ti,otap-del-sel-legacy = <0x0>;
- ti,otap-del-sel-mmc-hs = <0x0>;
- ti,otap-del-sel-hs200 = <0x6>;
- status = "disabled";
- };
-
- sdhci1: mmc@fa00000 {
- compatible = "ti,am62-sdhci";
- reg = <0x00 0xfa00000 0x00 0x260>, <0x00 0xfa08000 0x00 0x134>;
- interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 58 5>, <&k3_clks 58 6>;
- clock-names = "clk_ahb", "clk_xin";
- bus-width = <4>;
- ti,clkbuf-sel = <0x7>;
- ti,otap-del-sel-legacy = <0x0>;
- ti,otap-del-sel-sd-hs = <0x0>;
- ti,otap-del-sel-sdr12 = <0xf>;
- ti,otap-del-sel-sdr25 = <0xf>;
- ti,otap-del-sel-sdr50 = <0xc>;
- ti,otap-del-sel-sdr104 = <0x6>;
- ti,otap-del-sel-ddr50 = <0x9>;
- ti,itap-del-sel-legacy = <0x0>;
- ti,itap-del-sel-sd-hs = <0x0>;
- ti,itap-del-sel-sdr12 = <0x0>;
- ti,itap-del-sel-sdr25 = <0x0>;
- no-1-8-v;
- status = "disabled";
- };
-
- sdhci2: mmc@fa20000 {
- compatible = "ti,am62-sdhci";
- reg = <0x00 0xfa20000 0x00 0x260>, <0x00 0xfa28000 0x00 0x134>;
- interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&k3_pds 184 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 184 5>, <&k3_clks 184 6>;
- clock-names = "clk_ahb", "clk_xin";
- bus-width = <4>;
- ti,clkbuf-sel = <0x7>;
- ti,otap-del-sel-legacy = <0x0>;
- ti,otap-del-sel-sd-hs = <0x0>;
- ti,otap-del-sel-sdr12 = <0xf>;
- ti,otap-del-sel-sdr25 = <0xf>;
- ti,otap-del-sel-sdr50 = <0xc>;
- ti,otap-del-sel-sdr104 = <0x6>;
- ti,otap-del-sel-ddr50 = <0x9>;
- ti,itap-del-sel-legacy = <0x0>;
- ti,itap-del-sel-sd-hs = <0x0>;
- ti,itap-del-sel-sdr12 = <0x0>;
- ti,itap-del-sel-sdr25 = <0x0>;
- no-1-8-v;
- status = "disabled";
- };
-
- usbss0: dwc3-usb@f900000 {
- compatible = "ti,am62-usb";
- reg = <0x00 0x0f900000 0x00 0x800>;
- clocks = <&k3_clks 161 3>;
- clock-names = "ref";
- ti,syscon-phy-pll-refclk = <&wkup_conf 0x4008>;
- #address-cells = <2>;
- #size-cells = <2>;
- power-domains = <&k3_pds 178 TI_SCI_PD_EXCLUSIVE>;
- ranges;
- status = "disabled";
-
- usb0: usb@31000000 {
- compatible = "snps,dwc3";
- reg = <0x00 0x31000000 0x00 0x50000>;
- interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
- <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */
- interrupt-names = "host", "peripheral";
- maximum-speed = "high-speed";
- dr_mode = "otg";
- };
- };
-
- usbss1: dwc3-usb@f910000 {
- compatible = "ti,am62-usb";
- reg = <0x00 0x0f910000 0x00 0x800>;
- clocks = <&k3_clks 162 3>;
- clock-names = "ref";
- ti,syscon-phy-pll-refclk = <&wkup_conf 0x4018>;
- #address-cells = <2>;
- #size-cells = <2>;
- power-domains = <&k3_pds 179 TI_SCI_PD_EXCLUSIVE>;
- ranges;
- status = "disabled";
-
- usb1: usb@31100000 {
- compatible = "snps,dwc3";
- reg = <0x00 0x31100000 0x00 0x50000>;
- interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
- <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */
- interrupt-names = "host", "peripheral";
- maximum-speed = "high-speed";
- dr_mode = "otg";
- };
- };
-
- fss: bus@fc00000 {
- compatible = "simple-bus";
- reg = <0x00 0x0fc00000 0x00 0x70000>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
- status = "disabled";
-
- ospi0: spi@fc40000 {
- compatible = "ti,am654-ospi", "cdns,qspi-nor";
- reg = <0x00 0x0fc40000 0x00 0x100>,
- <0x05 0x00000000 0x01 0x00000000>;
- interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
- cdns,fifo-depth = <256>;
- cdns,fifo-width = <4>;
- cdns,trigger-address = <0x0>;
- clocks = <&k3_clks 75 7>;
- assigned-clocks = <&k3_clks 75 7>;
- assigned-clock-parents = <&k3_clks 75 8>;
- assigned-clock-rates = <166666666>;
- power-domains = <&k3_pds 75 TI_SCI_PD_EXCLUSIVE>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
- };
-
- cpsw3g: ethernet@8000000 {
- compatible = "ti,am642-cpsw-nuss";
- #address-cells = <2>;
- #size-cells = <2>;
- reg = <0x0 0x8000000 0x0 0x200000>;
- reg-names = "cpsw_nuss";
- ranges = <0x0 0x0 0x0 0x8000000 0x0 0x200000>;
- clocks = <&k3_clks 13 0>;
- assigned-clocks = <&k3_clks 13 3>;
- assigned-clock-parents = <&k3_clks 13 11>;
- clock-names = "fck";
- power-domains = <&k3_pds 13 TI_SCI_PD_EXCLUSIVE>;
- status = "disabled";
-
- dmas = <&main_pktdma 0xc600 15>,
- <&main_pktdma 0xc601 15>,
- <&main_pktdma 0xc602 15>,
- <&main_pktdma 0xc603 15>,
- <&main_pktdma 0xc604 15>,
- <&main_pktdma 0xc605 15>,
- <&main_pktdma 0xc606 15>,
- <&main_pktdma 0xc607 15>,
- <&main_pktdma 0x4600 15>;
- dma-names = "tx0", "tx1", "tx2", "tx3", "tx4", "tx5", "tx6",
- "tx7", "rx";
-
- ethernet-ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpsw_port1: port@1 {
- reg = <1>;
- ti,mac-only;
- label = "port1";
- phys = <&phy_gmii_sel 1>;
- mac-address = [00 00 00 00 00 00];
- ti,syscon-efuse = <&wkup_conf 0x200>;
- };
-
- cpsw_port2: port@2 {
- reg = <2>;
- ti,mac-only;
- label = "port2";
- phys = <&phy_gmii_sel 2>;
- mac-address = [00 00 00 00 00 00];
- };
- };
-
- cpsw3g_mdio: mdio@f00 {
- compatible = "ti,cpsw-mdio","ti,davinci_mdio";
- reg = <0x0 0xf00 0x0 0x100>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&k3_clks 13 0>;
- clock-names = "fck";
- bus_freq = <1000000>;
- };
-
- cpts@3d000 {
- compatible = "ti,j721e-cpts";
- reg = <0x0 0x3d000 0x0 0x400>;
- clocks = <&k3_clks 13 3>;
- clock-names = "cpts";
- interrupts-extended = <&gic500 GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "cpts";
- ti,cpts-ext-ts-inputs = <4>;
- ti,cpts-periodic-outputs = <2>;
- };
- };
-
- hwspinlock: spinlock@2a000000 {
- compatible = "ti,am64-hwspinlock";
- reg = <0x00 0x2a000000 0x00 0x1000>;
- #hwlock-cells = <1>;
- };
-
- mailbox0_cluster0: mailbox@29000000 {
- compatible = "ti,am64-mailbox";
- reg = <0x00 0x29000000 0x00 0x200>;
- interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
- #mbox-cells = <1>;
- ti,mbox-num-users = <4>;
- ti,mbox-num-fifos = <16>;
- };
-
- mailbox0_cluster1: mailbox@29010000 {
- compatible = "ti,am64-mailbox";
- reg = <0x00 0x29010000 0x00 0x200>;
- interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
- #mbox-cells = <1>;
- ti,mbox-num-users = <4>;
- ti,mbox-num-fifos = <16>;
- };
-
- mailbox0_cluster2: mailbox@29020000 {
- compatible = "ti,am64-mailbox";
- reg = <0x00 0x29020000 0x00 0x200>;
- interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- #mbox-cells = <1>;
- ti,mbox-num-users = <4>;
- ti,mbox-num-fifos = <16>;
- };
-
- mailbox0_cluster3: mailbox@29030000 {
- compatible = "ti,am64-mailbox";
- reg = <0x00 0x29030000 0x00 0x200>;
- interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
- #mbox-cells = <1>;
- ti,mbox-num-users = <4>;
- ti,mbox-num-fifos = <16>;
- };
-
- main_mcan0: can@20701000 {
- compatible = "bosch,m_can";
- reg = <0x00 0x20701000 0x00 0x200>,
- <0x00 0x20708000 0x00 0x8000>;
- reg-names = "m_can", "message_ram";
- power-domains = <&k3_pds 98 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 98 6>, <&k3_clks 98 1>;
- clock-names = "hclk", "cclk";
- interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "int0", "int1";
- bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
- status = "disabled";
- };
-
- main_rti0: watchdog@e000000 {
- compatible = "ti,j7-rti-wdt";
- reg = <0x00 0x0e000000 0x00 0x100>;
- clocks = <&k3_clks 125 0>;
- power-domains = <&k3_pds 125 TI_SCI_PD_EXCLUSIVE>;
- assigned-clocks = <&k3_clks 125 0>;
- assigned-clock-parents = <&k3_clks 125 2>;
- };
-
- main_rti1: watchdog@e010000 {
- compatible = "ti,j7-rti-wdt";
- reg = <0x00 0x0e010000 0x00 0x100>;
- clocks = <&k3_clks 126 0>;
- power-domains = <&k3_pds 126 TI_SCI_PD_EXCLUSIVE>;
- assigned-clocks = <&k3_clks 126 0>;
- assigned-clock-parents = <&k3_clks 126 2>;
- };
-
- main_rti2: watchdog@e020000 {
- compatible = "ti,j7-rti-wdt";
- reg = <0x00 0x0e020000 0x00 0x100>;
- clocks = <&k3_clks 127 0>;
- power-domains = <&k3_pds 127 TI_SCI_PD_EXCLUSIVE>;
- assigned-clocks = <&k3_clks 127 0>;
- assigned-clock-parents = <&k3_clks 127 2>;
- };
-
- main_rti3: watchdog@e030000 {
- compatible = "ti,j7-rti-wdt";
- reg = <0x00 0x0e030000 0x00 0x100>;
- clocks = <&k3_clks 128 0>;
- power-domains = <&k3_pds 128 TI_SCI_PD_EXCLUSIVE>;
- assigned-clocks = <&k3_clks 128 0>;
- assigned-clock-parents = <&k3_clks 128 2>;
- };
-
- main_rti4: watchdog@e040000 {
- compatible = "ti,j7-rti-wdt";
- reg = <0x00 0x0e040000 0x00 0x100>;
- clocks = <&k3_clks 205 0>;
- power-domains = <&k3_pds 205 TI_SCI_PD_EXCLUSIVE>;
- assigned-clocks = <&k3_clks 205 0>;
- assigned-clock-parents = <&k3_clks 205 2>;
- };
-
- epwm0: pwm@23000000 {
- compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
- #pwm-cells = <3>;
- reg = <0x00 0x23000000 0x00 0x100>;
- power-domains = <&k3_pds 86 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&epwm_tbclk 0>, <&k3_clks 86 0>;
- clock-names = "tbclk", "fck";
- status = "disabled";
- };
-
- epwm1: pwm@23010000 {
- compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
- #pwm-cells = <3>;
- reg = <0x00 0x23010000 0x00 0x100>;
- power-domains = <&k3_pds 87 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&epwm_tbclk 1>, <&k3_clks 87 0>;
- clock-names = "tbclk", "fck";
- status = "disabled";
- };
-
- epwm2: pwm@23020000 {
- compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
- #pwm-cells = <3>;
- reg = <0x00 0x23020000 0x00 0x100>;
- power-domains = <&k3_pds 88 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&epwm_tbclk 2>, <&k3_clks 88 0>;
- clock-names = "tbclk", "fck";
- status = "disabled";
- };
-
- ecap0: pwm@23100000 {
- compatible = "ti,am3352-ecap";
- #pwm-cells = <3>;
- reg = <0x00 0x23100000 0x00 0x100>;
- power-domains = <&k3_pds 51 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 51 0>;
- clock-names = "fck";
- status = "disabled";
- };
-
- ecap1: pwm@23110000 {
- compatible = "ti,am3352-ecap";
- #pwm-cells = <3>;
- reg = <0x00 0x23110000 0x00 0x100>;
- power-domains = <&k3_pds 52 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 52 0>;
- clock-names = "fck";
- status = "disabled";
- };
-
- ecap2: pwm@23120000 {
- compatible = "ti,am3352-ecap";
- #pwm-cells = <3>;
- reg = <0x00 0x23120000 0x00 0x100>;
- power-domains = <&k3_pds 53 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 53 0>;
- clock-names = "fck";
- status = "disabled";
- };
-
- mcasp0: audio-controller@2b00000 {
- compatible = "ti,am33xx-mcasp-audio";
- reg = <0x00 0x02b00000 0x00 0x2000>,
- <0x00 0x02b08000 0x00 0x400>;
- reg-names = "mpu", "dat";
- interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tx", "rx";
-
- dmas = <&main_bcdma 0 0xc500 0>, <&main_bcdma 0 0x4500 0>;
- dma-names = "tx", "rx";
-
- clocks = <&k3_clks 190 0>;
- clock-names = "fck";
- assigned-clocks = <&k3_clks 190 0>;
- assigned-clock-parents = <&k3_clks 190 2>;
- power-domains = <&k3_pds 190 TI_SCI_PD_EXCLUSIVE>;
- status = "disabled";
- };
-
- mcasp1: audio-controller@2b10000 {
- compatible = "ti,am33xx-mcasp-audio";
- reg = <0x00 0x02b10000 0x00 0x2000>,
- <0x00 0x02b18000 0x00 0x400>;
- reg-names = "mpu", "dat";
- interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tx", "rx";
-
- dmas = <&main_bcdma 0 0xc501 0>, <&main_bcdma 0 0x4501 0>;
- dma-names = "tx", "rx";
-
- clocks = <&k3_clks 191 0>;
- clock-names = "fck";
- assigned-clocks = <&k3_clks 191 0>;
- assigned-clock-parents = <&k3_clks 191 2>;
- power-domains = <&k3_pds 191 TI_SCI_PD_EXCLUSIVE>;
- status = "disabled";
- };
-
- mcasp2: audio-controller@2b20000 {
- compatible = "ti,am33xx-mcasp-audio";
- reg = <0x00 0x02b20000 0x00 0x2000>,
- <0x00 0x02b28000 0x00 0x400>;
- reg-names = "mpu", "dat";
- interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tx", "rx";
-
- dmas = <&main_bcdma 0 0xc502 0>, <&main_bcdma 0 0x4502 0>;
- dma-names = "tx", "rx";
-
- clocks = <&k3_clks 192 0>;
- clock-names = "fck";
- assigned-clocks = <&k3_clks 192 0>;
- assigned-clock-parents = <&k3_clks 192 2>;
- power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>;
- status = "disabled";
- };
-
- ti_csi2rx0: ticsi2rx@30102000 {
- compatible = "ti,j721e-csi2rx-shim";
- dmas = <&main_bcdma_csi 0 0x5000 0>;
- dma-names = "rx0";
- reg = <0x00 0x30102000 0x00 0x1000>;
- power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
- status = "disabled";
-
- cdns_csi2rx0: csi-bridge@30101000 {
- compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
- reg = <0x00 0x30101000 0x00 0x1000>;
- clocks = <&k3_clks 182 0>, <&k3_clks 182 3>, <&k3_clks 182 0>,
- <&k3_clks 182 0>, <&k3_clks 182 4>, <&k3_clks 182 4>;
- clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
- "pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk";
- phys = <&dphy0>;
- phy-names = "dphy";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- csi0_port0: port@0 {
- reg = <0>;
- status = "disabled";
- };
-
- csi0_port1: port@1 {
- reg = <1>;
- status = "disabled";
- };
-
- csi0_port2: port@2 {
- reg = <2>;
- status = "disabled";
- };
-
- csi0_port3: port@3 {
- reg = <3>;
- status = "disabled";
- };
-
- csi0_port4: port@4 {
- reg = <4>;
- status = "disabled";
- };
- };
- };
- };
-
- dphy0: phy@30110000 {
- compatible = "cdns,dphy-rx";
- reg = <0x00 0x30110000 0x00 0x1100>;
- #phy-cells = <0>;
- power-domains = <&k3_pds 185 TI_SCI_PD_EXCLUSIVE>;
- status = "disabled";
- };
-
- dss: dss@30200000 {
- compatible = "ti,am62a7-dss";
- reg = <0x00 0x30200000 0x00 0x1000>, /* common */
- <0x00 0x30202000 0x00 0x1000>, /* vidl1 */
- <0x00 0x30206000 0x00 0x1000>, /* vid */
- <0x00 0x30207000 0x00 0x1000>, /* ovr1 */
- <0x00 0x30208000 0x00 0x1000>, /* ovr2 */
- <0x00 0x3020a000 0x00 0x1000>, /* vp1: Tied OFF in the SoC */
- <0x00 0x3020b000 0x00 0x1000>, /* vp2: Used as DPI Out */
- <0x00 0x30201000 0x00 0x1000>; /* common1 */
- reg-names = "common", "vidl1", "vid",
- "ovr1", "ovr2", "vp1", "vp2", "common1";
- power-domains = <&k3_pds 186 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 186 6>,
- <&k3_clks 186 0>,
- <&k3_clks 186 2>;
- clock-names = "fck", "vp1", "vp2";
- interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
-
- dss_ports: ports {
- #address-cells = <1>;
- #size-cells = <0>;
- };
- };
-};
diff --git a/arch/arm/dts/k3-am62a-mcu.dtsi b/arch/arm/dts/k3-am62a-mcu.dtsi
deleted file mode 100644
index 8c36e56f4138..000000000000
--- a/arch/arm/dts/k3-am62a-mcu.dtsi
+++ /dev/null
@@ -1,170 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only OR MIT
-/*
- * Device Tree Source for AM625 SoC Family MCU Domain peripherals
- *
- * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-&cbass_mcu {
- mcu_pmx0: pinctrl@4084000 {
- compatible = "pinctrl-single";
- reg = <0x00 0x04084000 0x00 0x88>;
- #pinctrl-cells = <1>;
- pinctrl-single,register-width = <32>;
- pinctrl-single,function-mask = <0xffffffff>;
- status = "disabled";
- };
-
- /*
- * The MCU domain timer interrupts are routed only to the ESM module,
- * and not currently available for Linux. The MCU domain timers are
- * of limited use without interrupts, and likely reserved by the ESM.
- */
- mcu_timer0: timer@4800000 {
- compatible = "ti,am654-timer";
- reg = <0x00 0x4800000 0x00 0x400>;
- clocks = <&k3_clks 35 2>;
- clock-names = "fck";
- power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>;
- ti,timer-pwm;
- status = "reserved";
- };
-
- mcu_timer1: timer@4810000 {
- compatible = "ti,am654-timer";
- reg = <0x00 0x4810000 0x00 0x400>;
- clocks = <&k3_clks 48 2>;
- clock-names = "fck";
- power-domains = <&k3_pds 48 TI_SCI_PD_EXCLUSIVE>;
- ti,timer-pwm;
- status = "reserved";
- };
-
- mcu_timer2: timer@4820000 {
- compatible = "ti,am654-timer";
- reg = <0x00 0x4820000 0x00 0x400>;
- clocks = <&k3_clks 49 2>;
- clock-names = "fck";
- power-domains = <&k3_pds 49 TI_SCI_PD_EXCLUSIVE>;
- ti,timer-pwm;
- status = "reserved";
- };
-
- mcu_timer3: timer@4830000 {
- compatible = "ti,am654-timer";
- reg = <0x00 0x4830000 0x00 0x400>;
- clocks = <&k3_clks 50 2>;
- clock-names = "fck";
- power-domains = <&k3_pds 50 TI_SCI_PD_EXCLUSIVE>;
- ti,timer-pwm;
- status = "reserved";
- };
-
- mcu_uart0: serial@4a00000 {
- compatible = "ti,am64-uart", "ti,am654-uart";
- reg = <0x00 0x04a00000 0x00 0x100>;
- interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 149 0>;
- clock-names = "fclk";
- status = "disabled";
- };
-
- mcu_i2c0: i2c@4900000 {
- compatible = "ti,am64-i2c", "ti,omap4-i2c";
- reg = <0x00 0x04900000 0x00 0x100>;
- interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 106 2>;
- clock-names = "fck";
- status = "disabled";
- };
-
- mcu_spi0: spi@4b00000 {
- compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
- reg = <0x00 0x04b00000 0x00 0x400>;
- interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 147 0>;
- status = "disabled";
- };
-
- mcu_spi1: spi@4b10000 {
- compatible = "ti,am654-mcspi","ti,omap4-mcspi";
- reg = <0x00 0x04b10000 0x00 0x400>;
- interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 148 0>;
- status = "disabled";
- };
-
- mcu_gpio_intr: interrupt-controller@4210000 {
- compatible = "ti,sci-intr";
- reg = <0x00 0x04210000 0x00 0x200>;
- ti,intr-trigger-type = <1>;
- interrupt-controller;
- interrupt-parent = <&gic500>;
- #interrupt-cells = <1>;
- ti,sci = <&dmsc>;
- ti,sci-dev-id = <5>;
- ti,interrupt-ranges = <0 104 4>;
- };
-
- mcu_gpio0: gpio@4201000 {
- compatible = "ti,am64-gpio", "ti,keystone-gpio";
- reg = <0x00 0x04201000 0x00 0x100>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-parent = <&mcu_gpio_intr>;
- interrupts = <30>, <31>;
- interrupt-controller;
- #interrupt-cells = <2>;
- ti,ngpio = <24>;
- ti,davinci-gpio-unbanked = <0>;
- power-domains = <&k3_pds 79 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 79 0>;
- clock-names = "gpio";
- status = "disabled";
- };
-
- mcu_rti0: watchdog@4880000 {
- compatible = "ti,j7-rti-wdt";
- reg = <0x00 0x04880000 0x00 0x100>;
- clocks = <&k3_clks 131 0>;
- power-domains = <&k3_pds 131 TI_SCI_PD_EXCLUSIVE>;
- assigned-clocks = <&k3_clks 131 0>;
- assigned-clock-parents = <&k3_clks 131 2>;
- /* Tightly coupled to M4F */
- status = "reserved";
- };
-
- mcu_mcan0: can@4e08000 {
- compatible = "bosch,m_can";
- reg = <0x00 0x4e08000 0x00 0x200>,
- <0x00 0x4e00000 0x00 0x8000>;
- reg-names = "m_can", "message_ram";
- power-domains = <&k3_pds 188 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 188 6>, <&k3_clks 188 1>;
- clock-names = "hclk", "cclk";
- bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
- status = "disabled";
- };
-
- mcu_mcan1: can@4e18000 {
- compatible = "bosch,m_can";
- reg = <0x00 0x4e18000 0x00 0x200>,
- <0x00 0x4e10000 0x00 0x8000>;
- reg-names = "m_can", "message_ram";
- power-domains = <&k3_pds 189 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 189 6>, <&k3_clks 189 1>;
- clock-names = "hclk", "cclk";
- bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
- status = "disabled";
- };
-};
diff --git a/arch/arm/dts/k3-am62a-sk-binman.dtsi b/arch/arm/dts/k3-am62a-sk-binman.dtsi
index ec3bf7ce913b..6ccc8b5834cb 100644
--- a/arch/arm/dts/k3-am62a-sk-binman.dtsi
+++ b/arch/arm/dts/k3-am62a-sk-binman.dtsi
@@ -144,7 +144,7 @@
#ifdef CONFIG_TARGET_AM62A7_A53_EVM
-#define SPL_AM62A7_SK_DTB "spl/dts/k3-am62a7-sk.dtb"
+#define SPL_AM62A7_SK_DTB "spl/dts/ti/k3-am62a7-sk.dtb"
#define AM62A7_SK_DTB "u-boot.dtb"
&binman {
diff --git a/arch/arm/dts/k3-am62a-thermal.dtsi b/arch/arm/dts/k3-am62a-thermal.dtsi
deleted file mode 100644
index c7486fb2a5b4..000000000000
--- a/arch/arm/dts/k3-am62a-thermal.dtsi
+++ /dev/null
@@ -1,50 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only OR MIT
-/*
- * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-#include <dt-bindings/thermal/thermal.h>
-
-thermal_zones: thermal-zones {
- main0_thermal: main0-thermal {
- polling-delay-passive = <250>; /* milliSeconds */
- polling-delay = <500>; /* milliSeconds */
- thermal-sensors = <&wkup_vtm0 0>;
-
- trips {
- main0_crit: main0-crit {
- temperature = <125000>; /* milliCelsius */
- hysteresis = <2000>; /* milliCelsius */
- type = "critical";
- };
- };
- };
-
- main1_thermal: main1-thermal {
- polling-delay-passive = <250>; /* milliSeconds */
- polling-delay = <500>; /* milliSeconds */
- thermal-sensors = <&wkup_vtm0 1>;
-
- trips {
- main1_crit: main1-crit {
- temperature = <125000>; /* milliCelsius */
- hysteresis = <2000>; /* milliCelsius */
- type = "critical";
- };
- };
- };
-
- main2_thermal: main2-thermal {
- polling-delay-passive = <250>; /* milliSeconds */
- polling-delay = <500>; /* milliSeconds */
- thermal-sensors = <&wkup_vtm0 2>;
-
- trips {
- main2_crit: main2-crit {
- temperature = <125000>; /* milliCelsius */
- hysteresis = <2000>; /* milliCelsius */
- type = "critical";
- };
- };
- };
-};
diff --git a/arch/arm/dts/k3-am62a-wakeup.dtsi b/arch/arm/dts/k3-am62a-wakeup.dtsi
deleted file mode 100644
index f7bec484705a..000000000000
--- a/arch/arm/dts/k3-am62a-wakeup.dtsi
+++ /dev/null
@@ -1,73 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only OR MIT
-/*
- * Device Tree Source for AM62A SoC Family Wakeup Domain peripherals
- *
- * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-&cbass_wakeup {
- wkup_conf: syscon@43000000 {
- compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
- reg = <0x00 0x43000000 0x00 0x20000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x00 0x00 0x43000000 0x20000>;
-
- chipid: chipid@14 {
- compatible = "ti,am654-chipid";
- reg = <0x14 0x4>;
- };
- };
-
- wkup_uart0: serial@2b300000 {
- compatible = "ti,am64-uart", "ti,am654-uart";
- reg = <0x00 0x2b300000 0x00 0x100>;
- interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 114 0>;
- clock-names = "fclk";
- status = "disabled";
- };
-
- wkup_i2c0: i2c@2b200000 {
- compatible = "ti,am64-i2c", "ti,omap4-i2c";
- reg = <0x00 0x2b200000 0x00 0x100>;
- interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 107 4>;
- clock-names = "fck";
- status = "disabled";
- };
-
- wkup_rtc0: rtc@2b1f0000 {
- compatible = "ti,am62-rtc";
- reg = <0x00 0x2b1f0000 0x00 0x100>;
- interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&k3_clks 117 6> , <&k3_clks 117 0>;
- clock-names = "vbus", "osc32k";
- power-domains = <&k3_pds 117 TI_SCI_PD_EXCLUSIVE>;
- wakeup-source;
- status = "disabled";
- };
-
- wkup_rti0: watchdog@2b000000 {
- compatible = "ti,j7-rti-wdt";
- reg = <0x00 0x2b000000 0x00 0x100>;
- clocks = <&k3_clks 132 0>;
- power-domains = <&k3_pds 132 TI_SCI_PD_EXCLUSIVE>;
- assigned-clocks = <&k3_clks 132 0>;
- assigned-clock-parents = <&k3_clks 132 2>;
- /* Used by DM firmware */
- status = "reserved";
- };
-
- wkup_vtm0: temperature-sensor@b00000 {
- compatible = "ti,j7200-vtm";
- reg = <0x00 0xb00000 0x00 0x400>,
- <0x00 0xb01000 0x00 0x400>;
- power-domains = <&k3_pds 95 TI_SCI_PD_EXCLUSIVE>;
- #thermal-sensor-cells = <1>;
- };
-};
diff --git a/arch/arm/dts/k3-am62a.dtsi b/arch/arm/dts/k3-am62a.dtsi
deleted file mode 100644
index b1b884600293..000000000000
--- a/arch/arm/dts/k3-am62a.dtsi
+++ /dev/null
@@ -1,125 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only OR MIT
-/*
- * Device Tree Source for AM62A SoC Family
- *
- * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/soc/ti,sci_pm_domain.h>
-
-#include "k3-pinctrl.h"
-
-/ {
- model = "Texas Instruments K3 AM62A SoC";
- compatible = "ti,am62a7";
- interrupt-parent = <&gic500>;
- #address-cells = <2>;
- #size-cells = <2>;
-
- chosen { };
-
- firmware {
- optee {
- compatible = "linaro,optee-tz";
- method = "smc";
- };
-
- psci: psci {
- compatible = "arm,psci-1.0";
- method = "smc";
- };
- };
-
- a53_timer0: timer-cl0-cpu0 {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */
- <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */
- <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */
- <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */
- };
-
- pmu: pmu {
- compatible = "arm,cortex-a53-pmu";
- interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- cbass_main: bus@f0000 {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <2>;
-
- ranges = <0x00 0x000f0000 0x00 0x000f0000 0x00 0x00030000>, /* Main MMRs */
- <0x00 0x00420000 0x00 0x00420000 0x00 0x00001000>, /* ESM0 */
- <0x00 0x00600000 0x00 0x00600000 0x00 0x00001100>, /* GPIO */
- <0x00 0x00703000 0x00 0x00703000 0x00 0x00000200>, /* USB0 debug trace */
- <0x00 0x0070c000 0x00 0x0070c000 0x00 0x00000200>, /* USB1 debug trace */
- <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* Timesync router */
- <0x00 0x01000000 0x00 0x01000000 0x00 0x01b28400>, /* First peripheral window */
- <0x00 0x08000000 0x00 0x08000000 0x00 0x00200000>, /* Main CPSW */
- <0x00 0x0e000000 0x00 0x0e000000 0x00 0x01d20000>, /* Second peripheral window */
- <0x00 0x0fd00000 0x00 0x0fd00000 0x00 0x00020000>, /* GPU */
- <0x00 0x20000000 0x00 0x20000000 0x00 0x0a008000>, /* Third peripheral window */
- <0x00 0x30040000 0x00 0x30040000 0x00 0x00080000>, /* PRUSS-M */
- <0x00 0x30101000 0x00 0x30101000 0x00 0x00010100>, /* CSI window */
- <0x00 0x30200000 0x00 0x30200000 0x00 0x00010000>, /* DSS */
- <0x00 0x30210000 0x00 0x30210000 0x00 0x00010000>, /* VPU */
- <0x00 0x31000000 0x00 0x31000000 0x00 0x00050000>, /* USB0 DWC3 Core window */
- <0x00 0x31100000 0x00 0x31100000 0x00 0x00050000>, /* USB1 DWC3 Core window */
- <0x00 0x40900000 0x00 0x40900000 0x00 0x00030000>, /* SA3UL */
- <0x00 0x43600000 0x00 0x43600000 0x00 0x00010000>, /* SA3 sproxy data */
- <0x00 0x44043000 0x00 0x44043000 0x00 0x00000fe0>, /* TI SCI DEBUG */
- <0x00 0x44860000 0x00 0x44860000 0x00 0x00040000>, /* SA3 sproxy config */
- <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>, /* DMSS */
- <0x00 0x60000000 0x00 0x60000000 0x00 0x08000000>, /* FSS0 DAT1 */
- <0x00 0x70000000 0x00 0x70000000 0x00 0x00010000>, /* OCSRAM */
- <0x00 0x7e000000 0x00 0x7e000000 0x00 0x00100000>, /* C7x_0 */
- <0x01 0x00000000 0x01 0x00000000 0x00 0x00310000>, /* A53 PERIPHBASE */
- <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS0 DAT3 */
-
- /* MCU Domain Range */
- <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>,
- <0x00 0x79000000 0x00 0x79000000 0x00 0x00008000>, /* MCU R5 ATCM */
- <0x00 0x79020000 0x00 0x79020000 0x00 0x00008000>, /* MCU R5 BTCM */
- <0x00 0x79100000 0x00 0x79100000 0x00 0x00040000>, /* MCU R5 IRAM0 */
- <0x00 0x79140000 0x00 0x79140000 0x00 0x00040000>, /* MCU R5 IRAM1 */
-
- /* Wakeup Domain Range */
- <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00002400>,
- <0x00 0x2b000000 0x00 0x2b000000 0x00 0x00300400>,
- <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>,
- <0x00 0x78000000 0x00 0x78000000 0x00 0x00008000>, /* DM R5 ATCM */
- <0x00 0x78100000 0x00 0x78100000 0x00 0x00008000>; /* DM R5 BTCM */
-
- cbass_mcu: bus@4000000 {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>, /* Peripheral window */
- <0x00 0x79000000 0x00 0x79000000 0x00 0x00008000>, /* MCU R5 ATCM */
- <0x00 0x79020000 0x00 0x79020000 0x00 0x00008000>, /* MCU R5 BTCM */
- <0x00 0x79100000 0x00 0x79100000 0x00 0x00040000>, /* MCU IRAM0 */
- <0x00 0x79140000 0x00 0x79140000 0x00 0x00040000>; /* MCU IRAM1 */
- };
-
- cbass_wakeup: bus@b00000 {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00002400>, /* VTM */
- <0x00 0x2b000000 0x00 0x2b000000 0x00 0x00300400>, /* Peripheral Window */
- <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>, /* WKUP CTRL MMR */
- <0x00 0x78000000 0x00 0x78000000 0x00 0x00008000>, /* DM R5 ATCM*/
- <0x00 0x78100000 0x00 0x78100000 0x00 0x00008000>; /* DM R5 BTCM*/
- };
- };
-
- #include "k3-am62a-thermal.dtsi"
-};
-
-/* Now include the peripherals for each bus segments */
-#include "k3-am62a-main.dtsi"
-#include "k3-am62a-mcu.dtsi"
-#include "k3-am62a-wakeup.dtsi"
diff --git a/arch/arm/dts/k3-am62a7-sk.dts b/arch/arm/dts/k3-am62a7-sk.dts
deleted file mode 100644
index f241637a5642..000000000000
--- a/arch/arm/dts/k3-am62a7-sk.dts
+++ /dev/null
@@ -1,702 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only OR MIT
-/*
- * AM62A SK: https://www.ti.com/lit/zip/sprr459
- *
- * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-/dts-v1/;
-
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/net/ti-dp83867.h>
-#include "k3-am62a7.dtsi"
-
-/ {
- compatible = "ti,am62a7-sk", "ti,am62a7";
- model = "Texas Instruments AM62A7 SK";
-
- aliases {
- serial0 = &wkup_uart0;
- serial2 = &main_uart0;
- serial3 = &main_uart1;
- mmc0 = &sdhci0;
- mmc1 = &sdhci1;
- };
-
- chosen {
- stdout-path = "serial2:115200n8";
- };
-
- memory@80000000 {
- device_type = "memory";
- /* 4G RAM */
- reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
- <0x00000008 0x80000000 0x00000000 0x80000000>;
- };
-
- reserved-memory {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- secure_tfa_ddr: tfa@9e780000 {
- reg = <0x00 0x9e780000 0x00 0x80000>;
- alignment = <0x1000>;
- no-map;
- };
-
- secure_ddr: optee@9e800000 {
- reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
- alignment = <0x1000>;
- no-map;
- };
-
- wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0x9c900000 0x00 0x01e00000>;
- no-map;
- };
- };
-
- vmain_pd: regulator-0 {
- /* TPS25750 PD CONTROLLER OUTPUT */
- compatible = "regulator-fixed";
- regulator-name = "vmain_pd";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- vcc_5v0: regulator-1 {
- /* Output of TPS63070 */
- compatible = "regulator-fixed";
- regulator-name = "vcc_5v0";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&vmain_pd>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- vcc_3v3_main: regulator-2 {
- /* output of LM5141-Q1 */
- compatible = "regulator-fixed";
- regulator-name = "vcc_3v3_main";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vmain_pd>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- vdd_mmc1: regulator-3 {
- /* TPS22918DBVR */
- compatible = "regulator-fixed";
- regulator-name = "vdd_mmc1";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- enable-active-high;
- gpio = <&exp1 3 GPIO_ACTIVE_HIGH>;
- };
-
- vcc_3v3_sys: regulator-4 {
- /* output of TPS222965DSGT */
- compatible = "regulator-fixed";
- regulator-name = "vcc_3v3_sys";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vcc_3v3_main>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&usr_led_pins_default>;
-
- led-0 {
- label = "am62a-sk:green:heartbeat";
- gpios = <&main_gpio1 49 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "heartbeat";
- function = LED_FUNCTION_HEARTBEAT;
- default-state = "off";
- };
- };
-
- tlv320_mclk: clk-0 {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <12288000>;
- };
-
- hdmi0: connector-hdmi {
- compatible = "hdmi-connector";
- label = "hdmi";
- type = "a";
-
- port {
- hdmi_connector_in: endpoint {
- remote-endpoint = <&sii9022_out>;
- };
- };
- };
-
- codec_audio: sound {
- compatible = "simple-audio-card";
- simple-audio-card,name = "AM62Ax-SKEVM";
- simple-audio-card,widgets =
- "Headphone", "Headphone Jack",
- "Line", "Line In",
- "Microphone", "Microphone Jack";
- simple-audio-card,routing =
- "Headphone Jack", "HPLOUT",
- "Headphone Jack", "HPROUT",
- "LINE1L", "Line In",
- "LINE1R", "Line In",
- "MIC3R", "Microphone Jack",
- "Microphone Jack", "Mic Bias";
- simple-audio-card,format = "dsp_b";
- simple-audio-card,bitclock-master = <&sound_master>;
- simple-audio-card,frame-master = <&sound_master>;
- simple-audio-card,bitclock-inversion;
-
- simple-audio-card,cpu {
- sound-dai = <&mcasp1>;
- };
-
- sound_master: simple-audio-card,codec {
- sound-dai = <&tlv320aic3106>;
- clocks = <&tlv320_mclk>;
- };
- };
-};
-
-&mcu_pmx0 {
- wkup_uart0_pins_default: wkup-uart0-default-pins {
- pinctrl-single,pins = <
- AM62AX_MCU_IOPAD(0x0024, PIN_INPUT, 0) /* (C9) WKUP_UART0_RXD */
- AM62AX_MCU_IOPAD(0x0028, PIN_OUTPUT, 0) /* (E9) WKUP_UART0_TXD */
- AM62AX_MCU_IOPAD(0x002c, PIN_INPUT, 0) /* (C10) WKUP_UART0_CTSn */
- AM62AX_MCU_IOPAD(0x0030, PIN_OUTPUT, 0) /* (C8) WKUP_UART0_RTSn */
- >;
- };
-};
-
-/* WKUP UART0 is used for DM firmware logs */
-&wkup_uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&wkup_uart0_pins_default>;
- status = "reserved";
-};
-
-&main_pmx0 {
- main_dss0_pins_default: main-dss0-default-pins {
- pinctrl-single,pins = <
- AM62AX_IOPAD(0x100, PIN_OUTPUT, 0) /* (V17) VOUT0_VSYNC */
- AM62AX_IOPAD(0x0f8, PIN_OUTPUT, 0) /* (T18) VOUT0_HSYNC */
- AM62AX_IOPAD(0x104, PIN_OUTPUT, 0) /* (AA22) VOUT0_PCLK */
- AM62AX_IOPAD(0x0fc, PIN_OUTPUT, 0) /* (U17) VOUT0_DE */
- AM62AX_IOPAD(0x0b8, PIN_OUTPUT, 0) /* (U22) VOUT0_DATA0 */
- AM62AX_IOPAD(0x0bc, PIN_OUTPUT, 0) /* (U21) VOUT0_DATA1 */
- AM62AX_IOPAD(0x0c0, PIN_OUTPUT, 0) /* (U20) VOUT0_DATA2 */
- AM62AX_IOPAD(0x0c4, PIN_OUTPUT, 0) /* (U19) VOUT0_DATA3 */
- AM62AX_IOPAD(0x0c8, PIN_OUTPUT, 0) /* (T19) VOUT0_DATA4 */
- AM62AX_IOPAD(0x0cc, PIN_OUTPUT, 0) /* (U18) VOUT0_DATA5 */
- AM62AX_IOPAD(0x0d0, PIN_OUTPUT, 0) /* (V22) VOUT0_DATA6 */
- AM62AX_IOPAD(0x0d4, PIN_OUTPUT, 0) /* (V21) VOUT0_DATA7 */
- AM62AX_IOPAD(0x0d8, PIN_OUTPUT, 0) /* (V19) VOUT0_DATA8 */
- AM62AX_IOPAD(0x0dc, PIN_OUTPUT, 0) /* (V18) VOUT0_DATA9 */
- AM62AX_IOPAD(0x0e0, PIN_OUTPUT, 0) /* (W22) VOUT0_DATA10 */
- AM62AX_IOPAD(0x0e4, PIN_OUTPUT, 0) /* (W21) VOUT0_DATA11 */
- AM62AX_IOPAD(0x0e8, PIN_OUTPUT, 0) /* (W20) VOUT0_DATA12 */
- AM62AX_IOPAD(0x0ec, PIN_OUTPUT, 0) /* (W19) VOUT0_DATA13 */
- AM62AX_IOPAD(0x0f0, PIN_OUTPUT, 0) /* (Y21) VOUT0_DATA14 */
- AM62AX_IOPAD(0x0f4, PIN_OUTPUT, 0) /* (Y22) VOUT0_DATA15 */
- AM62AX_IOPAD(0x05c, PIN_OUTPUT, 1) /* (P22) GPMC0_AD8.VOUT0_DATA16 */
- AM62AX_IOPAD(0x060, PIN_OUTPUT, 1) /* (R19) GPMC0_AD9.VOUT0_DATA17 */
- AM62AX_IOPAD(0x064, PIN_OUTPUT, 1) /* (R20) GPMC0_AD10.VOUT0_DATA18 */
- AM62AX_IOPAD(0x068, PIN_OUTPUT, 1) /* (R22) GPMC0_AD11.VOUT0_DATA19 */
- AM62AX_IOPAD(0x06c, PIN_OUTPUT, 1) /* (T22) GPMC0_AD12.VOUT0_DATA20 */
- AM62AX_IOPAD(0x070, PIN_OUTPUT, 1) /* (R21) GPMC0_AD13.VOUT0_DATA21 */
- AM62AX_IOPAD(0x074, PIN_OUTPUT, 1) /* (T20) GPMC0_AD14.VOUT0_DATA22 */
- AM62AX_IOPAD(0x078, PIN_OUTPUT, 1) /* (T21) GPMC0_AD15.VOUT0_DATA23 */
- >;
- };
-
- main_uart0_pins_default: main-uart0-default-pins {
- pinctrl-single,pins = <
- AM62AX_IOPAD(0x1c8, PIN_INPUT, 0) /* (E14) UART0_RXD */
- AM62AX_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (D15) UART0_TXD */
- >;
- };
-
- main_uart1_pins_default: main-uart1-default-pins {
- pinctrl-single,pins = <
- AM62AX_IOPAD(0x01e8, PIN_INPUT, 1) /* (C17) I2C1_SCL.UART1_RXD */
- AM62AX_IOPAD(0x01ec, PIN_OUTPUT, 1) /* (E17) I2C1_SDA.UART1_TXD */
- AM62AX_IOPAD(0x0194, PIN_INPUT, 2) /* (C19) MCASP0_AXR3.UART1_CTSn */
- AM62AX_IOPAD(0x0198, PIN_OUTPUT, 2) /* (B19) MCASP0_AXR2.UART1_RTSn */
- >;
- };
-
- main_i2c0_pins_default: main-i2c0-default-pins {
- pinctrl-single,pins = <
- AM62AX_IOPAD(0x1e0, PIN_INPUT_PULLUP, 0) /* (B16) I2C0_SCL */
- AM62AX_IOPAD(0x1e4, PIN_INPUT_PULLUP, 0) /* (A16) I2C0_SDA */
- >;
- };
-
- main_i2c1_pins_default: main-i2c1-default-pins {
- pinctrl-single,pins = <
- AM62AX_IOPAD(0x1e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */
- AM62AX_IOPAD(0x1ec, PIN_INPUT_PULLUP, 0) /* (A17) I2C1_SDA */
- >;
- };
-
- main_i2c2_pins_default: main-i2c2-default-pins {
- pinctrl-single,pins = <
- AM62AX_IOPAD(0x0b0, PIN_INPUT_PULLUP, 1) /* (K22) GPMC0_CSn2.I2C2_SCL */
- AM62AX_IOPAD(0x0b4, PIN_INPUT_PULLUP, 1) /* (K24) GPMC0_CSn3.I2C2_SDA */
- >;
- };
-
- main_mmc0_pins_default: main-mmc0-default-pins {
- pinctrl-single,pins = <
- AM62AX_IOPAD(0x220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */
- AM62AX_IOPAD(0x218, PIN_INPUT, 0) /* (AB1) MMC0_CLKLB */
- AM62AX_IOPAD(0x21c, PIN_INPUT, 0) /* (AB1) MMC0_CLK */
- AM62AX_IOPAD(0x214, PIN_INPUT, 0) /* (AA2) MMC0_DAT0 */
- AM62AX_IOPAD(0x210, PIN_INPUT_PULLUP, 0) /* (AA1) MMC0_DAT1 */
- AM62AX_IOPAD(0x20c, PIN_INPUT_PULLUP, 0) /* (AA3) MMC0_DAT2 */
- AM62AX_IOPAD(0x208, PIN_INPUT_PULLUP, 0) /* (Y4) MMC0_DAT3 */
- AM62AX_IOPAD(0x204, PIN_INPUT_PULLUP, 0) /* (AB2) MMC0_DAT4 */
- AM62AX_IOPAD(0x200, PIN_INPUT_PULLUP, 0) /* (AC1) MMC0_DAT5 */
- AM62AX_IOPAD(0x1fc, PIN_INPUT_PULLUP, 0) /* (AD2) MMC0_DAT6 */
- AM62AX_IOPAD(0x1f8, PIN_INPUT_PULLUP, 0) /* (AC2) MMC0_DAT7 */
- >;
- };
-
- main_mmc1_pins_default: main-mmc1-default-pins {
- pinctrl-single,pins = <
- AM62AX_IOPAD(0x23c, PIN_INPUT, 0) /* (A21) MMC1_CMD */
- AM62AX_IOPAD(0x234, PIN_INPUT, 0) /* (B22) MMC1_CLK */
- AM62AX_IOPAD(0x230, PIN_INPUT, 0) /* (A22) MMC1_DAT0 */
- AM62AX_IOPAD(0x22c, PIN_INPUT, 0) /* (B21) MMC1_DAT1 */
- AM62AX_IOPAD(0x228, PIN_INPUT, 0) /* (C21) MMC1_DAT2 */
- AM62AX_IOPAD(0x224, PIN_INPUT, 0) /* (D22) MMC1_DAT3 */
- AM62AX_IOPAD(0x240, PIN_INPUT, 0) /* (D17) MMC1_SDCD */
- >;
- };
-
- usr_led_pins_default: usr-led-default-pins {
- pinctrl-single,pins = <
- AM62AX_IOPAD(0x244, PIN_OUTPUT, 7) /* (D18) MMC1_SDWP.GPIO1_49 */
- >;
- };
-
- main_usb1_pins_default: main-usb1-default-pins {
- pinctrl-single,pins = <
- AM62AX_IOPAD(0x0258, PIN_OUTPUT, 0) /* (F18) USB1_DRVVBUS */
- >;
- };
-
- main_mdio1_pins_default: main-mdio1-default-pins {
- pinctrl-single,pins = <
- AM62AX_IOPAD(0x160, PIN_OUTPUT, 0) /* (V12) MDIO0_MDC */
- AM62AX_IOPAD(0x15c, PIN_INPUT, 0) /* (V13) MDIO0_MDIO */
- >;
- };
-
- main_rgmii1_pins_default: main-rgmii1-default-pins {
- pinctrl-single,pins = <
- AM62AX_IOPAD(0x14c, PIN_INPUT, 0) /* (AB16) RGMII1_RD0 */
- AM62AX_IOPAD(0x150, PIN_INPUT, 0) /* (V15) RGMII1_RD1 */
- AM62AX_IOPAD(0x154, PIN_INPUT, 0) /* (W15) RGMII1_RD2 */
- AM62AX_IOPAD(0x158, PIN_INPUT, 0) /* (V14) RGMII1_RD3 */
- AM62AX_IOPAD(0x148, PIN_INPUT, 0) /* (AA16) RGMII1_RXC */
- AM62AX_IOPAD(0x144, PIN_INPUT, 0) /* (AA15) RGMII1_RX_CTL */
- AM62AX_IOPAD(0x134, PIN_INPUT, 0) /* (Y17) RGMII1_TD0 */
- AM62AX_IOPAD(0x138, PIN_INPUT, 0) /* (V16) RGMII1_TD1 */
- AM62AX_IOPAD(0x13c, PIN_INPUT, 0) /* (Y16) RGMII1_TD2 */
- AM62AX_IOPAD(0x140, PIN_INPUT, 0) /* (AA17) RGMII1_TD3 */
- AM62AX_IOPAD(0x130, PIN_INPUT, 0) /* (AB17) RGMII1_TXC */
- AM62AX_IOPAD(0x12c, PIN_INPUT, 0) /* (W16) RGMII1_TX_CTL */
- >;
- };
-
- main_mcasp1_pins_default: main-mcasp1-default-pins {
- pinctrl-single,pins = <
- AM62AX_IOPAD(0x090, PIN_INPUT, 2) /* (L19) GPMC0_BE0n_CLE.MCASP1_ACLKX */
- AM62AX_IOPAD(0x098, PIN_INPUT, 2) /* (R18) GPMC0_WAIT0.MCASP1_AFSX */
- AM62AX_IOPAD(0x08c, PIN_OUTPUT, 2) /* (K19) GPMC0_WEn.MCASP1_AXR0 */
- AM62AX_IOPAD(0x084, PIN_INPUT, 2) /* (L18) GPMC0_ADVn_ALE.MCASP1_AXR2 */
- >;
- };
-
- main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-default-pins {
- pinctrl-single,pins = <
- AM62AX_IOPAD(0x01d4, PIN_INPUT, 7) /* (C15) UART0_RTSn.GPIO1_23 */
- >;
- };
-};
-
-&mcu_pmx0 {
- status = "okay";
-
- pmic_irq_pins_default: pmic-irq-default-pins {
- pinctrl-single,pins = <
- AM62AX_MCU_IOPAD(0x000, PIN_INPUT, 7) /* (E11) MCU_GPIO0_0 */
- >;
- };
-};
-
-&mcu_gpio0 {
- status = "okay";
-};
-
-&main_i2c0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&main_i2c0_pins_default>;
- clock-frequency = <400000>;
-
- typec_pd0: usb-power-controller@3f {
- compatible = "ti,tps6598x";
- reg = <0x3f>;
-
- connector {
- compatible = "usb-c-connector";
- label = "USB-C";
- self-powered;
- data-role = "dual";
- power-role = "sink";
- port {
- usb_con_hs: endpoint {
- remote-endpoint = <&usb0_hs_ep>;
- };
- };
- };
- };
-
- tps659312: pmic@48 {
- compatible = "ti,tps6593-q1";
- reg = <0x48>;
- ti,primary-pmic;
- system-power-controller;
-
- gpio-controller;
- #gpio-cells = <2>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_irq_pins_default>;
- interrupt-parent = <&mcu_gpio0>;
- interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
-
- buck123-supply = <&vcc_3v3_sys>;
- buck4-supply = <&vcc_3v3_sys>;
- buck5-supply = <&vcc_3v3_sys>;
- ldo1-supply = <&vcc_3v3_sys>;
- ldo2-supply = <&vcc_3v3_sys>;
- ldo3-supply = <&buck5>;
- ldo4-supply = <&vcc_3v3_sys>;
-
- regulators {
- buck123: buck123 {
- regulator-name = "vcc_core";
- regulator-min-microvolt = <715000>;
- regulator-max-microvolt = <895000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- buck4: buck4 {
- regulator-name = "vcc_1v1";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- buck5: buck5 {
- regulator-name = "vcc_1v8_sys";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo1: ldo1 {
- regulator-name = "vddshv5_sdio";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo2: ldo2 {
- regulator-name = "vpp_1v8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo3: ldo3 {
- regulator-name = "vcc_0v85";
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <850000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo4: ldo4 {
- regulator-name = "vdda_1v8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- regulator-always-on;
- };
- };
- };
-};
-
-&main_i2c1 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&main_i2c1_pins_default>;
- clock-frequency = <100000>;
-
- exp1: gpio@22 {
- compatible = "ti,tca6424";
- reg = <0x22>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-parent = <&main_gpio1>;
- interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
- interrupt-controller;
- #interrupt-cells = <2>;
- pinctrl-names = "default";
- pinctrl-0 = <&main_gpio1_ioexp_intr_pins_default>;
-
- gpio-line-names = "GPIO_CPSW2_RST", "GPIO_CPSW1_RST",
- "BT_EN_SOC", "MMC1_SD_EN",
- "VPP_EN", "EXP_PS_3V3_En",
- "EXP_PS_5V0_En", "EXP_HAT_DETECT",
- "GPIO_AUD_RSTn", "GPIO_eMMC_RSTn",
- "UART1_FET_BUF_EN", "BT_UART_WAKE_SOC",
- "GPIO_HDMI_RSTn", "CSI_GPIO0",
- "CSI_GPIO1", "WLAN_ALERTn",
- "HDMI_INTn", "TEST_GPIO2",
- "MCASP1_FET_EN", "MCASP1_BUF_BT_EN",
- "MCASP1_FET_SEL", "UART1_FET_SEL",
- "PD_I2C_IRQ", "IO_EXP_TEST_LED";
- };
-
- tlv320aic3106: audio-codec@1b {
- #sound-dai-cells = <0>;
- compatible = "ti,tlv320aic3106";
- reg = <0x1b>;
- ai3x-micbias-vg = <1>; /* 2.0V */
-
- /* Regulators */
- AVDD-supply = <&vcc_3v3_sys>;
- IOVDD-supply = <&vcc_3v3_sys>;
- DRVDD-supply = <&vcc_3v3_sys>;
- DVDD-supply = <&buck5>;
- };
-
- exp2: gpio@23 {
- compatible = "ti,tca6424";
- reg = <0x23>;
- gpio-controller;
- #gpio-cells = <2>;
-
- gpio-line-names = "", "",
- "", "",
- "", "",
- "", "",
- "WL_LT_EN", "CSI_RSTz",
- "", "",
- "", "",
- "", "",
- "SPI0_FET_SEL", "SPI0_FET_OE",
- "RGMII2_BRD_CONN_DET", "CSI_SEL2",
- "CSI_EN", "AUTO_100M_1000M_CONFIG",
- "CSI_VLDO_SEL", "SoC_WLAN_SDIO_RST";
- };
-
- sii9022: bridge-hdmi@3b {
- compatible = "sil,sii9022";
- reg = <0x3b>;
- interrupt-parent = <&exp1>;
- interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
- #sound-dai-cells = <0>;
- sil,i2s-data-lanes = < 0 >;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
-
- sii9022_in: endpoint {
- remote-endpoint = <&dpi1_out>;
- };
- };
-
- port@1 {
- reg = <1>;
-
- sii9022_out: endpoint {
- remote-endpoint = <&hdmi_connector_in>;
- };
- };
- };
- };
-};
-
-&main_i2c2 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&main_i2c2_pins_default>;
- clock-frequency = <400000>;
-};
-
-&sdhci0 {
- /* eMMC */
- status = "okay";
- non-removable;
- pinctrl-names = "default";
- pinctrl-0 = <&main_mmc0_pins_default>;
- disable-wp;
-};
-
-&sdhci1 {
- /* SD/MMC */
- status = "okay";
- vmmc-supply = <&vdd_mmc1>;
- pinctrl-names = "default";
- pinctrl-0 = <&main_mmc1_pins_default>;
- disable-wp;
-};
-
-&main_gpio0 {
- status = "okay";
-};
-
-&main_gpio1 {
- status = "okay";
-};
-
-&main_gpio_intr {
- status = "okay";
-};
-
-&main_uart0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&main_uart0_pins_default>;
-};
-
-/* Main UART1 is used for TIFS firmware logs */
-&main_uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&main_uart1_pins_default>;
- status = "reserved";
-};
-
-&usbss0 {
- status = "okay";
- ti,vbus-divider;
-};
-
-&usb0 {
- usb-role-switch;
-
- port {
- usb0_hs_ep: endpoint {
- remote-endpoint = <&usb_con_hs>;
- };
- };
-};
-
-&usbss1 {
- status = "okay";
-};
-
-&usb1 {
- dr_mode = "host";
- pinctrl-names = "default";
- pinctrl-0 = <&main_usb1_pins_default>;
-};
-
-&cpsw3g {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&main_rgmii1_pins_default>;
-};
-
-&cpsw_port1 {
- status = "okay";
- phy-mode = "rgmii-rxid";
- phy-handle = <&cpsw3g_phy0>;
-};
-
-&cpsw_port2 {
- status = "disabled";
-};
-
-&cpsw3g_mdio {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&main_mdio1_pins_default>;
-
- cpsw3g_phy0: ethernet-phy@0 {
- reg = <0>;
- ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
- ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
- ti,min-output-impedance;
- };
-};
-
-&mcasp1 {
- status = "okay";
- #sound-dai-cells = <0>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&main_mcasp1_pins_default>;
-
- op-mode = <0>; /* MCASP_IIS_MODE */
- tdm-slots = <2>;
-
- serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
- 1 0 2 0
- 0 0 0 0
- 0 0 0 0
- 0 0 0 0
- >;
- tx-num-evt = <32>;
- rx-num-evt = <32>;
-};
-
-&dss {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&main_dss0_pins_default>;
-};
-
-&dss_ports {
- /* VP2: DPI Output */
- port@1 {
- reg = <1>;
-
- dpi1_out: endpoint {
- remote-endpoint = <&sii9022_in>;
- };
- };
-};
diff --git a/configs/am62ax_evm_a53_defconfig b/configs/am62ax_evm_a53_defconfig
index 6b29a4b9cff5..2a71b06310f1 100644
--- a/configs/am62ax_evm_a53_defconfig
+++ b/configs/am62ax_evm_a53_defconfig
@@ -8,7 +8,7 @@ CONFIG_SOC_K3_AM62A7=y
CONFIG_TARGET_AM62A7_A53_EVM=y
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80480000
-CONFIG_DEFAULT_DEVICE_TREE="k3-am62a7-sk"
+CONFIG_DEFAULT_DEVICE_TREE="ti/k3-am62a7-sk"
CONFIG_SPL_TEXT_BASE=0x80080000
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_DM_RESET=y
@@ -39,6 +39,7 @@ CONFIG_SPL_YMODEM_SUPPORT=y
CONFIG_CMD_MMC=y
CONFIG_OF_CONTROL=y
CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_UPSTREAM=y
CONFIG_MULTI_DTB_FIT=y
CONFIG_SPL_MULTI_DTB_FIT=y
CONFIG_SPL_MULTI_DTB_FIT_NO_COMPRESSION=y
--
2.43.0
^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH 0/3] arm: dts: am625/am62a7: Switch over to OF_UPSTREAM
2024-06-05 15:27 [PATCH 0/3] arm: dts: am625/am62a7: Switch over to OF_UPSTREAM Nishanth Menon
` (2 preceding siblings ...)
2024-06-05 15:27 ` [PATCH 3/3] arm: dts: am62a7_sk: " Nishanth Menon
@ 2024-06-05 18:41 ` Dhruva Gole
2024-06-06 18:46 ` Bryan Brattlof
2024-06-18 14:53 ` Tom Rini
5 siblings, 0 replies; 9+ messages in thread
From: Dhruva Gole @ 2024-06-05 18:41 UTC (permalink / raw)
To: Nishanth Menon
Cc: Tom Rini, Bryan Brattlof, Vignesh Raghavendra, Robert Nelson,
u-boot
Hi,
On Jun 05, 2024 at 10:27:49 -0500, Nishanth Menon wrote:
> Cleanup am625 on by switching over the last two platforms (SK and
> beagleplay) over to OF_UPSTREAM, and while at it, switch over am62a7
> (last of the am62* family) over as well.
Thanks for the cleanup.
>
> This superscedes the previous version of beagleplay only patch[1]
>
> Test logs: https://gist.github.com/nmenon/ba310d3750a80789aca6a4fd90190135
>
> Nishanth Menon (3):
> arm: dts: am625_beagleplay: Switch to OF_UPSTREAM
> arm: dts: am625_sk: Switch to OF_UPSTREAM
> arm: dts: am62a7_sk: Switch to OF_UPSTREAM
>
For the series,
Reviewed-by: Dhruva Gole <d-gole@ti.com>
--
Best regards,
Dhruva Gole
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 1/3] arm: dts: am625_beagleplay: Switch to OF_UPSTREAM
2024-06-05 15:27 ` [PATCH 1/3] arm: dts: am625_beagleplay: Switch " Nishanth Menon
@ 2024-06-06 9:24 ` Mattijs Korpershoek
0 siblings, 0 replies; 9+ messages in thread
From: Mattijs Korpershoek @ 2024-06-06 9:24 UTC (permalink / raw)
To: Nishanth Menon, Tom Rini
Cc: Dhruva Gole, Bryan Brattlof, Vignesh Raghavendra, Robert Nelson,
u-boot, Nishanth Menon
Hi Nishanth,
Thank you for the patch.
On mer., juin 05, 2024 at 10:27, Nishanth Menon <nm@ti.com> wrote:
> Enable OF_UPSTREAM for AM625-beagleplay board. Remove DT files that
> are now available in dts/upstream. Update the appended files based on
> version of latest OF_UPSTREAM sync point (v6.10-rc1).
>
> Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
> ---
> arch/arm/dts/Makefile | 1 -
> arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi | 4 +-
> arch/arm/dts/k3-am625-beagleplay.dts | 932 -------------------
> configs/am62x_beagleplay_a53_defconfig | 3 +-
> 4 files changed, 4 insertions(+), 936 deletions(-)
> delete mode 100644 arch/arm/dts/k3-am625-beagleplay.dts
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 624dadf8ece2..813426a3e519 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -1200,7 +1200,6 @@ dtb-$(CONFIG_SOC_K3_AM642) += k3-am642-r5-evm.dtb \
>
> dtb-$(CONFIG_SOC_K3_AM625) += k3-am625-sk.dtb \
> k3-am625-r5-sk.dtb \
> - k3-am625-beagleplay.dtb \
> k3-am625-r5-beagleplay.dtb \
> k3-am625-verdin-r5.dtb \
> k3-am625-r5-phycore-som-2gb.dtb
> diff --git a/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi b/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi
> index 9ac4a825f841..dd5b335ed2ee 100644
> --- a/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi
> +++ b/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi
> @@ -66,9 +66,9 @@
> #ifdef CONFIG_TARGET_AM625_A53_BEAGLEPLAY
>
> #define SPL_NODTB "spl/u-boot-spl-nodtb.bin"
> -#define SPL_AM625_BEAGLEPLAY_DTB "spl/dts/k3-am625-beagleplay.dtb"
> +#define SPL_AM625_BEAGLEPLAY_DTB "spl/dts/ti/k3-am625-beagleplay.dtb"
> #define UBOOT_NODTB "u-boot-nodtb.bin"
> -#define AM625_BEAGLEPLAY_DTB "arch/arm/dts/k3-am625-beagleplay.dtb"
> +#define AM625_BEAGLEPLAY_DTB "dts/upstream/src/arm64/ti/k3-am625-beagleplay.dtb"
>
> &binman {
> ti-dm {
> diff --git a/arch/arm/dts/k3-am625-beagleplay.dts b/arch/arm/dts/k3-am625-beagleplay.dts
> deleted file mode 100644
> index 8ab838f1697c..000000000000
> --- a/arch/arm/dts/k3-am625-beagleplay.dts
> +++ /dev/null
> @@ -1,932 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only OR MIT
> -/*
> - * https://beagleplay.org/
> - *
> - * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/
> - * Copyright (C) 2022-2024 Robert Nelson, BeagleBoard.org Foundation
> - */
> -
> -/dts-v1/;
> -
> -#include <dt-bindings/leds/common.h>
> -#include <dt-bindings/gpio/gpio.h>
> -#include <dt-bindings/input/input.h>
> -#include "k3-am625.dtsi"
> -
> -/ {
> - compatible = "beagle,am625-beagleplay", "ti,am625";
> - model = "BeagleBoard.org BeaglePlay";
> -
> - aliases {
> - ethernet0 = &cpsw_port1;
> - ethernet1 = &cpsw_port2;
> - gpio0 = &main_gpio0;
> - gpio1 = &main_gpio1;
> - gpio2 = &mcu_gpio0;
> - i2c0 = &main_i2c0;
> - i2c1 = &main_i2c1;
> - i2c2 = &main_i2c2;
> - i2c3 = &main_i2c3;
> - i2c4 = &wkup_i2c0;
> - i2c5 = &mcu_i2c0;
> - mmc0 = &sdhci0;
> - mmc1 = &sdhci1;
> - mmc2 = &sdhci2;
> - rtc0 = &rtc;
> - serial0 = &main_uart5;
> - serial1 = &main_uart6;
> - serial2 = &main_uart0;
> - usb0 = &usb0;
> - usb1 = &usb1;
> - };
> -
> - chosen {
> - stdout-path = "serial2:115200n8";
> - };
> -
> - memory@80000000 {
> - bootph-pre-ram;
> - device_type = "memory";
> - /* 2G RAM */
> - reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
> - };
> -
> - reserved-memory {
> - #address-cells = <2>;
> - #size-cells = <2>;
> - ranges;
> -
> - ramoops: ramoops@9ca00000 {
> - compatible = "ramoops";
> - reg = <0x00 0x9ca00000 0x00 0x00100000>;
> - record-size = <0x8000>;
> - console-size = <0x8000>;
> - ftrace-size = <0x00>;
> - pmsg-size = <0x8000>;
> - };
> -
> - secure_tfa_ddr: tfa@9e780000 {
> - reg = <0x00 0x9e780000 0x00 0x80000>;
> - no-map;
> - };
> -
> - secure_ddr: optee@9e800000 {
> - reg = <0x00 0x9e800000 0x00 0x01800000>;
> - no-map;
> - };
> -
> - wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9db00000 {
> - compatible = "shared-dma-pool";
> - reg = <0x00 0x9db00000 0x00 0xc00000>;
> - no-map;
> - };
> - };
> -
> - vsys_5v0: regulator-1 {
> - bootph-all;
> - compatible = "regulator-fixed";
> - regulator-name = "vsys_5v0";
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - regulator-always-on;
> - regulator-boot-on;
> - };
> -
> - vdd_3v3: regulator-2 {
> - /* output of TLV62595DMQR-U12 */
> - bootph-all;
> - compatible = "regulator-fixed";
> - regulator-name = "vdd_3v3";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - vin-supply = <&vsys_5v0>;
> - regulator-always-on;
> - regulator-boot-on;
> - };
> -
> - wlan_en: regulator-3 {
> - /* OUTPUT of SN74AVC2T244DQMR */
> - compatible = "regulator-fixed";
> - regulator-name = "wlan_en";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - enable-active-high;
> - regulator-always-on;
> - vin-supply = <&vdd_3v3>;
> - gpio = <&main_gpio0 38 GPIO_ACTIVE_HIGH>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&wifi_en_pins_default>;
> - };
> -
> - vdd_3v3_sd: regulator-4 {
> - /* output of TPS22918DBVR-U21 */
> - bootph-all;
> - pinctrl-names = "default";
> - pinctrl-0 = <&vdd_3v3_sd_pins_default>;
> -
> - compatible = "regulator-fixed";
> - regulator-name = "vdd_3v3_sd";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - enable-active-high;
> - regulator-always-on;
> - vin-supply = <&vdd_3v3>;
> - gpio = <&main_gpio1 19 GPIO_ACTIVE_HIGH>;
> - };
> -
> - vdd_sd_dv: regulator-5 {
> - bootph-all;
> - compatible = "regulator-gpio";
> - regulator-name = "sd_hs200_switch";
> - pinctrl-names = "default";
> - pinctrl-0 = <&vdd_sd_dv_pins_default>;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-boot-on;
> - vin-supply = <&ldo1_reg>;
> - gpios = <&main_gpio1 49 GPIO_ACTIVE_HIGH>;
> - states = <1800000 0x0>,
> - <3300000 0x1>;
> - };
> -
> - leds {
> - bootph-all;
> - compatible = "gpio-leds";
> -
> - led-0 {
> - bootph-all;
> - gpios = <&main_gpio0 3 GPIO_ACTIVE_HIGH>;
> - linux,default-trigger = "heartbeat";
> - function = LED_FUNCTION_HEARTBEAT;
> - default-state = "off";
> - };
> -
> - led-1 {
> - bootph-all;
> - gpios = <&main_gpio0 4 GPIO_ACTIVE_HIGH>;
> - linux,default-trigger = "disk-activity";
> - function = LED_FUNCTION_DISK_ACTIVITY;
> - default-state = "keep";
> - };
> -
> - led-2 {
> - bootph-all;
> - gpios = <&main_gpio0 5 GPIO_ACTIVE_HIGH>;
> - function = LED_FUNCTION_CPU;
> - };
> -
> - led-3 {
> - bootph-all;
> - gpios = <&main_gpio0 6 GPIO_ACTIVE_HIGH>;
> - function = LED_FUNCTION_LAN;
> - };
> -
> - led-4 {
> - bootph-all;
> - gpios = <&main_gpio0 9 GPIO_ACTIVE_HIGH>;
> - function = LED_FUNCTION_WLAN;
> - };
> - };
> -
> - gpio_keys: gpio-keys {
> - compatible = "gpio-keys";
> - autorepeat;
> - pinctrl-names = "default";
> - pinctrl-0 = <&usr_button_pins_default>;
> -
> - usr: button-usr {
> - label = "User Key";
> - linux,code = <BTN_0>;
> - gpios = <&main_gpio0 18 GPIO_ACTIVE_LOW>;
> - };
> -
> - };
> -
> - hdmi0: connector-hdmi {
> - compatible = "hdmi-connector";
> - label = "hdmi";
> - type = "a";
> - port {
> - hdmi_connector_in: endpoint {
> - remote-endpoint = <&it66121_out>;
> - };
> - };
> - };
> -
> - sound {
> - compatible = "simple-audio-card";
> - simple-audio-card,name = "it66121 HDMI";
> - simple-audio-card,format = "i2s";
> - simple-audio-card,bitclock-master = <&hdmi_dailink_master>;
> - simple-audio-card,frame-master = <&hdmi_dailink_master>;
> -
> - hdmi_dailink_master: simple-audio-card,cpu {
> - sound-dai = <&mcasp1>;
> - system-clock-direction-out;
> - };
> -
> - simple-audio-card,codec {
> - sound-dai = <&it66121>;
> - };
> - };
> -
> -};
> -
> -&main_pmx0 {
> - gpio0_pins_default: gpio0-default-pins {
> - bootph-all;
> - pinctrl-single,pins = <
> - AM62X_IOPAD(0x0004, PIN_INPUT, 7) /* (G25) OSPI0_LBCLKO.GPIO0_1 */
> - AM62X_IOPAD(0x0008, PIN_INPUT, 7) /* (J24) OSPI0_DQS.GPIO0_2 */
> - AM62X_IOPAD(0x000c, PIN_INPUT, 7) /* (E25) OSPI0_D0.GPIO0_3 */
> - AM62X_IOPAD(0x0010, PIN_INPUT, 7) /* (G24) OSPI0_D1.GPIO0_4 */
> - AM62X_IOPAD(0x0014, PIN_INPUT, 7) /* (F25) OSPI0_D2.GPIO0_5 */
> - AM62X_IOPAD(0x0018, PIN_INPUT, 7) /* (F24) OSPI0_D3.GPIO0_6 */
> - AM62X_IOPAD(0x0024, PIN_INPUT, 7) /* (H25) OSPI0_D6.GPIO0_9 */
> - AM62X_IOPAD(0x0028, PIN_INPUT, 7) /* (J22) OSPI0_D7.GPIO0_10 */
> - AM62X_IOPAD(0x002c, PIN_INPUT, 7) /* (F23) OSPI0_CSn0.GPIO0_11 */
> - AM62X_IOPAD(0x0030, PIN_INPUT, 7) /* (G21) OSPI0_CSn1.GPIO0_12 */
> - AM62X_IOPAD(0x0034, PIN_INPUT, 7) /* (H21) OSPI0_CSn2.GPIO0_13 */
> - AM62X_IOPAD(0x0038, PIN_INPUT, 7) /* (E24) OSPI0_CSn3.GPIO0_14 */
> - AM62X_IOPAD(0x00a4, PIN_INPUT, 7) /* (M22) GPMC0_DIR.GPIO0_40 */
> - AM62X_IOPAD(0x00ac, PIN_INPUT, 7) /* (L21) GPMC0_CSn1.GPIO0_42 */
> - >;
> - };
> -
> - vdd_sd_dv_pins_default: vdd-sd-default-pins {
> - bootph-all;
> - pinctrl-single,pins = <
> - AM62X_IOPAD(0x0244, PIN_OUTPUT, 7) /* (C17) MMC1_SDWP.GPIO1_49 */
> - >;
> - };
> -
> - usr_button_pins_default: usr-button-default-pins {
> - pinctrl-single,pins = <
> - AM62X_IOPAD(0x0048, PIN_INPUT, 7) /* (N25) GPMC0_AD3.GPIO0_18 */
> - >;
> - };
> -
> - grove_pins_default: grove-default-pins {
> - pinctrl-single,pins = <
> - AM62X_IOPAD(0x01e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */
> - AM62X_IOPAD(0x01ec, PIN_INPUT_PULLUP, 0) /* (A17) I2C1_SDA */
> - >;
> - };
> -
> - local_i2c_pins_default: local-i2c-default-pins {
> - bootph-all;
> - pinctrl-single,pins = <
> - AM62X_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (B16) I2C0_SCL */
> - AM62X_IOPAD(0x01e4, PIN_INPUT_PULLUP, 0) /* (A16) I2C0_SDA */
> - >;
> - };
> -
> - i2c2_1v8_pins_default: i2c2-default-pins {
> - pinctrl-single,pins = <
> - AM62X_IOPAD(0x00b0, PIN_INPUT_PULLUP, 1) /* (K22) GPMC0_CSn2.I2C2_SCL */
> - AM62X_IOPAD(0x00b4, PIN_INPUT_PULLUP, 1) /* (K24) GPMC0_CSn3.I2C2_SDA */
> - >;
> - };
> -
> - mdio0_pins_default: mdio0-default-pins {
> - pinctrl-single,pins = <
> - AM62X_IOPAD(0x0160, PIN_OUTPUT, 0) /* (AD24) MDIO0_MDC */
> - AM62X_IOPAD(0x015c, PIN_INPUT, 0) /* (AB22) MDIO0_MDIO */
> - AM62X_IOPAD(0x003c, PIN_INPUT, 7) /* (M25) GPMC0_AD0.GPIO0_15 */
> - AM62X_IOPAD(0x018c, PIN_INPUT, 7) /* (AC21) RGMII2_RD2.GPIO1_5 */
> - >;
> - };
> -
> - rgmii1_pins_default: rgmii1-default-pins {
> - pinctrl-single,pins = <
> - AM62X_IOPAD(0x014c, PIN_INPUT, 0) /* (AB17) RGMII1_RD0 */
> - AM62X_IOPAD(0x0150, PIN_INPUT, 0) /* (AC17) RGMII1_RD1 */
> - AM62X_IOPAD(0x0154, PIN_INPUT, 0) /* (AB16) RGMII1_RD2 */
> - AM62X_IOPAD(0x0158, PIN_INPUT, 0) /* (AA15) RGMII1_RD3 */
> - AM62X_IOPAD(0x0148, PIN_INPUT, 0) /* (AD17) RGMII1_RXC */
> - AM62X_IOPAD(0x0144, PIN_INPUT, 0) /* (AE17) RGMII1_RX_CTL */
> - AM62X_IOPAD(0x0134, PIN_OUTPUT, 0) /* (AE20) RGMII1_TD0 */
> - AM62X_IOPAD(0x0138, PIN_OUTPUT, 0) /* (AD20) RGMII1_TD1 */
> - AM62X_IOPAD(0x013c, PIN_OUTPUT, 0) /* (AE18) RGMII1_TD2 */
> - AM62X_IOPAD(0x0140, PIN_OUTPUT, 0) /* (AD18) RGMII1_TD3 */
> - AM62X_IOPAD(0x0130, PIN_OUTPUT, 0) /* (AE19) RGMII1_TXC */
> - AM62X_IOPAD(0x012c, PIN_OUTPUT, 0) /* (AD19) RGMII1_TX_CTL */
> - >;
> - };
> -
> - emmc_pins_default: emmc-default-pins {
> - bootph-all;
> - pinctrl-single,pins = <
> - AM62X_IOPAD(0x0220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */
> - AM62X_IOPAD(0x0218, PIN_INPUT, 0) /* (AB1) MMC0_CLK */
> - AM62X_IOPAD(0x0214, PIN_INPUT, 0) /* (AA2) MMC0_DAT0 */
> - AM62X_IOPAD(0x0210, PIN_INPUT, 0) /* (AA1) MMC0_DAT1 */
> - AM62X_IOPAD(0x020c, PIN_INPUT, 0) /* (AA3) MMC0_DAT2 */
> - AM62X_IOPAD(0x0208, PIN_INPUT, 0) /* (Y4) MMC0_DAT3 */
> - AM62X_IOPAD(0x0204, PIN_INPUT, 0) /* (AB2) MMC0_DAT4 */
> - AM62X_IOPAD(0x0200, PIN_INPUT, 0) /* (AC1) MMC0_DAT5 */
> - AM62X_IOPAD(0x01fc, PIN_INPUT, 0) /* (AD2) MMC0_DAT6 */
> - AM62X_IOPAD(0x01f8, PIN_INPUT, 0) /* (AC2) MMC0_DAT7 */
> - >;
> - };
> -
> - vdd_3v3_sd_pins_default: vdd-3v3-sd-default-pins {
> - bootph-all;
> - pinctrl-single,pins = <
> - AM62X_IOPAD(0x01c4, PIN_INPUT, 7) /* (B14) SPI0_D1_GPIO1_19 */
> - >;
> - };
> -
> - sd_pins_default: sd-default-pins {
> - bootph-all;
> - pinctrl-single,pins = <
> - AM62X_IOPAD(0x023c, PIN_INPUT, 0) /* (A21) MMC1_CMD */
> - AM62X_IOPAD(0x0234, PIN_INPUT, 0) /* (B22) MMC1_CLK */
> - AM62X_IOPAD(0x0230, PIN_INPUT, 0) /* (A22) MMC1_DAT0 */
> - AM62X_IOPAD(0x022c, PIN_INPUT, 0) /* (B21) MMC1_DAT1 */
> - AM62X_IOPAD(0x0228, PIN_INPUT, 0) /* (C21) MMC1_DAT2 */
> - AM62X_IOPAD(0x0224, PIN_INPUT, 0) /* (D22) MMC1_DAT3 */
> - AM62X_IOPAD(0x0240, PIN_INPUT, 7) /* (D17) MMC1_SDCD.GPIO1_48 */
> - >;
> - };
> -
> - wifi_pins_default: wifi-default-pins {
> - pinctrl-single,pins = <
> - AM62X_IOPAD(0x0120, PIN_INPUT, 0) /* (C24) MMC2_CMD */
> - AM62X_IOPAD(0x0118, PIN_INPUT, 0) /* (D25) MMC2_CLK */
> - AM62X_IOPAD(0x0114, PIN_INPUT, 0) /* (B24) MMC2_DAT0 */
> - AM62X_IOPAD(0x0110, PIN_INPUT, 0) /* (C25) MMC2_DAT1 */
> - AM62X_IOPAD(0x010c, PIN_INPUT, 0) /* (E23) MMC2_DAT2 */
> - AM62X_IOPAD(0x0108, PIN_INPUT, 0) /* (D24) MMC2_DAT3 */
> - AM62X_IOPAD(0x0124, PIN_INPUT, 0) /* (A23) MMC2_SDCD */
> - AM62X_IOPAD(0x11c, PIN_INPUT, 0) /* (#N/A) MMC2_CLKB */
> - >;
> - };
> -
> - wifi_en_pins_default: wifi-en-default-pins {
> - pinctrl-single,pins = <
> - AM62X_IOPAD(0x009c, PIN_OUTPUT, 7) /* (V25) GPMC0_WAIT1.GPIO0_38 */
> - >;
> - };
> -
> - wifi_wlirq_pins_default: wifi-wlirq-default-pins {
> - pinctrl-single,pins = <
> - AM62X_IOPAD(0x00a8, PIN_INPUT, 7) /* (M21) GPMC0_CSn0.GPIO0_41 */
> - >;
> - };
> -
> - spe_pins_default: spe-default-pins {
> - pinctrl-single,pins = <
> - AM62X_IOPAD(0x0168, PIN_INPUT, 1) /* (AE21) RGMII2_TXC.RMII2_CRS_DV */
> - AM62X_IOPAD(0x0180, PIN_INPUT, 1) /* (AD23) RGMII2_RXC.RMII2_REF_CLK */
> - AM62X_IOPAD(0x0184, PIN_INPUT, 1) /* (AE23) RGMII2_RD0.RMII2_RXD0 */
> - AM62X_IOPAD(0x0188, PIN_INPUT, 1) /* (AB20) RGMII2_RD1.RMII2_RXD1 */
> - AM62X_IOPAD(0x017c, PIN_INPUT, 1) /* (AD22) RGMII2_RX_CTL.RMII2_RX_ER */
> - AM62X_IOPAD(0x016c, PIN_INPUT, 1) /* (Y18) RGMII2_TD0.RMII2_TXD0 */
> - AM62X_IOPAD(0x0170, PIN_INPUT, 1) /* (AA18) RGMII2_TD1.RMII2_TXD1 */
> - AM62X_IOPAD(0x0164, PIN_INPUT, 1) /* (AA19) RGMII2_TX_CTL.RMII2_TX_EN */
> - AM62X_IOPAD(0x0190, PIN_INPUT, 7) /* (AE22) RGMII2_RD3.GPIO1_6 */
> - AM62X_IOPAD(0x01f0, PIN_OUTPUT, 5) /* (A18) EXT_REFCLK1.CLKOUT0 */
> - >;
> - };
> -
> - mikrobus_i2c_pins_default: mikrobus-i2c-default-pins {
> - pinctrl-single,pins = <
> - AM62X_IOPAD(0x01d0, PIN_INPUT_PULLUP, 2) /* (A15) UART0_CTSn.I2C3_SCL */
> - AM62X_IOPAD(0x01d4, PIN_INPUT_PULLUP, 2) /* (B15) UART0_RTSn.I2C3_SDA */
> - >;
> - };
> -
> - mikrobus_uart_pins_default: mikrobus-uart-default-pins {
> - pinctrl-single,pins = <
> - AM62X_IOPAD(0x01d8, PIN_INPUT, 1) /* (C15) MCAN0_TX.UART5_RXD */
> - AM62X_IOPAD(0x01dc, PIN_OUTPUT, 1) /* (E15) MCAN0_RX.UART5_TXD */
> - >;
> - };
> -
> - mikrobus_spi_pins_default: mikrobus-spi-default-pins {
> - pinctrl-single,pins = <
> - AM62X_IOPAD(0x01b0, PIN_INPUT, 1) /* (A20) MCASP0_ACLKR.SPI2_CLK */
> - AM62X_IOPAD(0x01ac, PIN_INPUT, 1) /* (E19) MCASP0_AFSR.SPI2_CS0 */
> - AM62X_IOPAD(0x0194, PIN_INPUT, 1) /* (B19) MCASP0_AXR3.SPI2_D0 */
> - AM62X_IOPAD(0x0198, PIN_INPUT, 1) /* (A19) MCASP0_AXR2.SPI2_D1 */
> - >;
> - };
> -
> - mikrobus_gpio_pins_default: mikrobus-gpio-default-pins {
> - bootph-all;
> - pinctrl-single,pins = <
> - AM62X_IOPAD(0x019c, PIN_INPUT, 7) /* (B18) MCASP0_AXR1.GPIO1_9 */
> - AM62X_IOPAD(0x01a0, PIN_INPUT, 7) /* (E18) MCASP0_AXR0.GPIO1_10 */
> - AM62X_IOPAD(0x01a8, PIN_INPUT, 7) /* (D20) MCASP0_AFSX.GPIO1_12 */
> - >;
> - };
> -
> - main_uart0_pins_default: main-uart0-default-pins {
> - bootph-all;
> - pinctrl-single,pins = <
> - AM62X_IOPAD(0x01c8, PIN_INPUT, 0) /* (D14) UART0_RXD */
> - AM62X_IOPAD(0x01cc, PIN_OUTPUT, 0) /* (E14) UART0_TXD */
> - >;
> - };
> -
> - wifi_debug_uart_pins_default: wifi-debug-uart-default-pins {
> - pinctrl-single,pins = <
> - AM62X_IOPAD(0x001c, PIN_INPUT, 3) /* (J23) OSPI0_D4.UART6_RXD */
> - AM62X_IOPAD(0x0020, PIN_OUTPUT, 3) /* (J25) OSPI0_D5.UART6_TXD */
> - >;
> - };
> -
> - usb1_pins_default: usb1-default-pins {
> - pinctrl-single,pins = <
> - AM62X_IOPAD(0x0258, PIN_INPUT, 0) /* (F18) USB1_DRVVBUS */
> - >;
> - };
> -
> - pmic_irq_pins_default: pmic-irq-default-pins {
> - pinctrl-single,pins = <
> - AM62X_IOPAD(0x01f4, PIN_INPUT_PULLUP, 0) /* (D16) EXTINTn */
> - >;
> - };
> -
> - hdmi_gpio_pins_default: hdmi-gpio-default-pins {
> - pinctrl-single,pins = <
> - AM62X_IOPAD(0x0094, PIN_INPUT_PULLUP | PIN_DEBOUNCE_CONF6, 7) /* (N20) GPMC0_BE1n.GPIO0_36 */
> - AM62X_IOPAD(0x0054, PIN_OUTPUT_PULLUP, 7) /* (P21) GPMC0_AD6.GPIO0_21 */
> - >;
> - };
> -
> - mcasp_hdmi_pins_default: mcasp-hdmi-default-pins {
> - pinctrl-single,pins = <
> - AM62X_IOPAD(0x0090, PIN_INPUT, 2) /* (M24) GPMC0_BE0n_CLE.MCASP1_ACLKX */
> - AM62X_IOPAD(0x0098, PIN_INPUT, 2) /* (U23) GPMC0_WAIT0.MCASP1_AFSX */
> - AM62X_IOPAD(0x008c, PIN_OUTPUT, 2) /* (L25) GPMC0_WEn.MCASP1_AXR0 */
> - AM62X_IOPAD(0x0088, PIN_INPUT, 2) /* (L24) GPMC0_OEn_REn.MCASP1_AXR1 */
> - AM62X_IOPAD(0x0084, PIN_INPUT, 2) /* (L23) GPMC0_ADVn_ALE.MCASP1_AXR2 */
> - AM62X_IOPAD(0x007c, PIN_INPUT, 2) /* (P25) GPMC0_CLK.MCASP1_AXR3 */
> - >;
> - };
> -
> - dss0_pins_default: dss0-default-pins {
> - pinctrl-single,pins = <
> - AM62X_IOPAD(0x0100, PIN_OUTPUT, 0) /* (AC25) VOUT0_VSYNC */
> - AM62X_IOPAD(0x00f8, PIN_OUTPUT, 0) /* (AB24) VOUT0_HSYNC */
> - AM62X_IOPAD(0x0104, PIN_OUTPUT, 0) /* (AC24) VOUT0_PCLK */
> - AM62X_IOPAD(0x00fc, PIN_OUTPUT, 0) /* (Y20) VOUT0_DE */
> - AM62X_IOPAD(0x00b8, PIN_OUTPUT, 0) /* (U22) VOUT0_DATA0 */
> - AM62X_IOPAD(0x00bc, PIN_OUTPUT, 0) /* (V24) VOUT0_DATA1 */
> - AM62X_IOPAD(0x00c0, PIN_OUTPUT, 0) /* (W25) VOUT0_DATA2 */
> - AM62X_IOPAD(0x00c4, PIN_OUTPUT, 0) /* (W24) VOUT0_DATA3 */
> - AM62X_IOPAD(0x00c8, PIN_OUTPUT, 0) /* (Y25) VOUT0_DATA4 */
> - AM62X_IOPAD(0x00cc, PIN_OUTPUT, 0) /* (Y24) VOUT0_DATA5 */
> - AM62X_IOPAD(0x00d0, PIN_OUTPUT, 0) /* (Y23) VOUT0_DATA6 */
> - AM62X_IOPAD(0x00d4, PIN_OUTPUT, 0) /* (AA25) VOUT0_DATA7 */
> - AM62X_IOPAD(0x00d8, PIN_OUTPUT, 0) /* (V21) VOUT0_DATA8 */
> - AM62X_IOPAD(0x00dc, PIN_OUTPUT, 0) /* (W21) VOUT0_DATA9 */
> - AM62X_IOPAD(0x00e0, PIN_OUTPUT, 0) /* (V20) VOUT0_DATA10 */
> - AM62X_IOPAD(0x00e4, PIN_OUTPUT, 0) /* (AA23) VOUT0_DATA11 */
> - AM62X_IOPAD(0x00e8, PIN_OUTPUT, 0) /* (AB25) VOUT0_DATA12 */
> - AM62X_IOPAD(0x00ec, PIN_OUTPUT, 0) /* (AA24) VOUT0_DATA13 */
> - AM62X_IOPAD(0x00f0, PIN_OUTPUT, 0) /* (Y22) VOUT0_DATA14 */
> - AM62X_IOPAD(0x00f4, PIN_OUTPUT, 0) /* (AA21) VOUT0_DATA15 */
> - AM62X_IOPAD(0x005c, PIN_OUTPUT, 1) /* (R24) GPMC0_AD8.VOUT0_DATA16 */
> - AM62X_IOPAD(0x0060, PIN_OUTPUT, 1) /* (R25) GPMC0_AD9.VOUT0_DATA17 */
> - AM62X_IOPAD(0x0064, PIN_OUTPUT, 1) /* (T25) GPMC0_AD10.VOUT0_DATA18 */
> - AM62X_IOPAD(0x0068, PIN_OUTPUT, 1) /* (R21) GPMC0_AD11.VOUT0_DATA19 */
> - AM62X_IOPAD(0x006c, PIN_OUTPUT, 1) /* (T22) GPMC0_AD12.VOUT0_DATA20 */
> - AM62X_IOPAD(0x0070, PIN_OUTPUT, 1) /* (T24) GPMC0_AD13.VOUT0_DATA21 */
> - AM62X_IOPAD(0x0074, PIN_OUTPUT, 1) /* (U25) GPMC0_AD14.VOUT0_DATA22 */
> - AM62X_IOPAD(0x0078, PIN_OUTPUT, 1) /* (U24) GPMC0_AD15.VOUT0_DATA23 */
> - >;
> - };
> -};
> -
> -&mcu_pmx0 {
> - i2c_qwiic_pins_default: i2c-qwiic-default-pins {
> - pinctrl-single,pins = <
> - AM62X_MCU_IOPAD(0x0044, PIN_INPUT, 0) /* (A8) MCU_I2C0_SCL */
> - AM62X_MCU_IOPAD(0x0048, PIN_INPUT, 0) /* (D10) MCU_I2C0_SDA */
> - >;
> - };
> -
> - gbe_pmx_obsclk: gbe-pmx-obsclk-default-pins {
> - pinctrl-single,pins = <
> - AM62X_MCU_IOPAD(0x0004, PIN_OUTPUT, 1) /* (B8) MCU_SPI0_CS1.MCU_OBSCLK0 */
> - >;
> - };
> -
> - i2c_csi_pins_default: i2c-csi-default-pins {
> - pinctrl-single,pins = <
> - AM62X_MCU_IOPAD(0x004c, PIN_INPUT_PULLUP, 0) /* (B9) WKUP_I2C0_SCL */
> - AM62X_MCU_IOPAD(0x0050, PIN_INPUT_PULLUP, 0) /* (A9) WKUP_I2C0_SDA */
> - >;
> - };
> -
> - wifi_32k_clk: mcu-clk-out-default-pins {
> - pinctrl-single,pins = <
> - AM62X_MCU_IOPAD(0x0084, PIN_OUTPUT, 0) /* (A12) WKUP_CLKOUT0 */
> - >;
> - };
> -};
> -
> -&a53_opp_table {
> - /* Requires VDD_CORE to be at 0.85V */
> - opp-1400000000 {
> - opp-hz = /bits/ 64 <1400000000>;
> - opp-supported-hw = <0x01 0x0004>;
> - };
> -};
> -
> -&wkup_i2c0 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&i2c_csi_pins_default>;
> - clock-frequency = <400000>;
> - /* Enable with overlay for camera sensor */
> -};
> -
> -&mcu_i2c0 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&i2c_qwiic_pins_default>;
> - clock-frequency = <100000>;
> - status = "okay";
> -};
> -
> -&usbss0 {
> - bootph-all;
> - ti,vbus-divider;
> - status = "okay";
> -};
> -
> -&usb0 {
> - bootph-all;
> - dr_mode = "peripheral";
> -};
> -
> -&usbss1 {
> - ti,vbus-divider;
> - status = "okay";
> -};
> -
> -&usb1 {
> - dr_mode = "host";
> - pinctrl-names = "default";
> - pinctrl-0 = <&usb1_pins_default>;
> -};
> -
> -&cpsw3g {
> - pinctrl-names = "default";
> - pinctrl-0 = <&rgmii1_pins_default>, <&spe_pins_default>,
> - <&gbe_pmx_obsclk>;
> - assigned-clocks = <&k3_clks 157 70>, <&k3_clks 157 20>;
> - assigned-clock-parents = <&k3_clks 157 72>, <&k3_clks 157 22>;
> -};
> -
> -&cpsw_port1 {
> - phy-mode = "rgmii-rxid";
> - phy-handle = <&cpsw3g_phy0>;
> -};
> -
> -&cpsw_port2 {
> - phy-mode = "rmii";
> - phy-handle = <&cpsw3g_phy1>;
> -};
> -
> -&cpsw3g_mdio {
> - status = "okay";
> - pinctrl-names = "default";
> - pinctrl-0 = <&mdio0_pins_default>;
> -
> - cpsw3g_phy0: ethernet-phy@0 {
> - reg = <0>;
> - reset-gpios = <&main_gpio0 15 GPIO_ACTIVE_LOW>;
> - reset-assert-us = <10000>;
> - reset-deassert-us = <50000>;
> - };
> -
> - cpsw3g_phy1: ethernet-phy@1 {
> - reg = <1>;
> - reset-gpios = <&main_gpio1 5 GPIO_ACTIVE_LOW>;
> - reset-assert-us = <25>;
> - reset-deassert-us = <60000>; /* T2 */
> - };
> -};
> -
> -&main_gpio0 {
> - bootph-all;
> - pinctrl-names = "default";
> - pinctrl-0 = <&gpio0_pins_default>;
> - gpio-line-names = "BL_EN_3V3", "SPE_PO_EN", "RTC_INT", /* 0-2 */
> - "USR0", "USR1", "USR2", "USR3", "", "", "USR4", /* 3-9 */
> - "EEPROM_WP", /* 10 */
> - "CSI2_CAMERA_GPIO1", "CSI2_CAMERA_GPIO2", /* 11-12 */
> - "CC1352P7_BOOT", "CC1352P7_RSTN", "GBE_RSTN", "", "", /* 13-17 */
> - "USR_BUTTON", "", "", "", "", "", "", "", "", /* 18-26 */
> - "", "", "", "", "", "", "", "", "", "HDMI_INT", /* 27-36 */
> - "", "VDD_WLAN_EN", "", "", "WL_IRQ", "GBE_INTN",/* 37-42 */
> - "", "", "", "", "", "", "", "", "", "", "", "", /* 43-54 */
> - "", "", "", "", "", "", "", "", "", "", "", "", /* 55-66 */
> - "", "", "", "", "", "", "", "", "", "", "", "", /* 67-78 */
> - "", "", "", "", "", "", /* 79-84 */
> - "BITBANG_MDIO_DATA", "BITBANG_MDIO_CLK", /* 85-86 */
> - "", "", "", "", ""; /* 87-91 */
> -};
> -
> -&main_gpio1 {
> - bootph-all;
> - pinctrl-names = "default";
> - pinctrl-0 = <&mikrobus_gpio_pins_default>;
> - gpio-line-names = "", "", "", "", "", /* 0-4 */
> - "SPE_RSTN", "SPE_INTN", "MIKROBUS_GPIO1_7", /* 5-7 */
> - "MIKROBUS_GPIO1_8", "MIKROBUS_GPIO1_9", /* 8-9 */
> - "MIKROBUS_GPIO1_10", "MIKROBUS_GPIO1_11", /* 10-11 */
> - "MIKROBUS_GPIO1_12", "MIKROBUS_W1_GPIO0", /* 12-13 */
> - "MIKROBUS_GPIO1_14", /* 14 */
> - "", "", "", "", "VDD_3V3_SD", "", "", /* 15-21 */
> - "MIKROBUS_GPIO1_22", "MIKROBUS_GPIO1_23", /* 22-23 */
> - "MIKROBUS_GPIO1_24", "MIKROBUS_GPIO1_25", /* 24-25 */
> - "", "", "", "", "", "", "", "", "", "", "", "", /* 26-37 */
> - "", "", "", "", "", "", "", "", "", "", /* 38-47 */
> - "SD_CD", "SD_VOLT_SEL", "", ""; /* 48-51 */
> -};
> -
> -&main_i2c0 {
> - bootph-all;
> - pinctrl-names = "default";
> - pinctrl-0 = <&local_i2c_pins_default>;
> - clock-frequency = <400000>;
> - status = "okay";
> -
> - eeprom@50 {
> - compatible = "atmel,24c32";
> - reg = <0x50>;
> - };
> -
> - rtc: rtc@68 {
> - compatible = "ti,bq32000";
> - reg = <0x68>;
> - interrupt-parent = <&main_gpio0>;
> - interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
> - };
> -
> - tps65219: pmic@30 {
> - bootph-all;
> - compatible = "ti,tps65219";
> - reg = <0x30>;
> - buck1-supply = <&vsys_5v0>;
> - buck2-supply = <&vsys_5v0>;
> - buck3-supply = <&vsys_5v0>;
> - ldo1-supply = <&vdd_3v3>;
> - ldo2-supply = <&buck2_reg>;
> - ldo3-supply = <&vdd_3v3>;
> - ldo4-supply = <&vdd_3v3>;
> -
> - pinctrl-names = "default";
> - pinctrl-0 = <&pmic_irq_pins_default>;
> - interrupt-parent = <&gic500>;
> - interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
> - interrupt-controller;
> - #interrupt-cells = <1>;
> -
> - system-power-controller;
> - ti,power-button;
> -
> - regulators {
> - buck1_reg: buck1 {
> - regulator-name = "VDD_CORE";
> - regulator-min-microvolt = <850000>;
> - regulator-max-microvolt = <850000>;
> - regulator-boot-on;
> - regulator-always-on;
> - };
> -
> - buck2_reg: buck2 {
> - regulator-name = "VDD_1V8";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - regulator-boot-on;
> - regulator-always-on;
> - };
> -
> - buck3_reg: buck3 {
> - regulator-name = "VDD_1V2";
> - regulator-min-microvolt = <1200000>;
> - regulator-max-microvolt = <1200000>;
> - regulator-boot-on;
> - regulator-always-on;
> - };
> -
> - ldo1_reg: ldo1 {
> - /*
> - * Regulator is left as is unused, vdd_sd
> - * is controlled via GPIO with bypass config
> - * as per the NVM configuration
> - */
> - regulator-name = "VDD_SD_3V3";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-allow-bypass;
> - regulator-boot-on;
> - regulator-always-on;
> - };
> -
> - ldo2_reg: ldo2 {
> - regulator-name = "VDDA_0V85";
> - regulator-min-microvolt = <850000>;
> - regulator-max-microvolt = <850000>;
> - regulator-boot-on;
> - regulator-always-on;
> - };
> -
> - ldo3_reg: ldo3 {
> - regulator-name = "VDDA_1V8";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - regulator-boot-on;
> - regulator-always-on;
> - };
> -
> - ldo4_reg: ldo4 {
> - regulator-name = "VDD_2V5";
> - regulator-min-microvolt = <2500000>;
> - regulator-max-microvolt = <2500000>;
> - regulator-boot-on;
> - regulator-always-on;
> - };
> - };
> - };
> -};
> -
> -&main_i2c1 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&grove_pins_default>;
> - clock-frequency = <100000>;
> - status = "okay";
> -};
> -
> -&main_i2c2 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&i2c2_1v8_pins_default>;
> - clock-frequency = <100000>;
> - status = "okay";
> -
> - it66121: bridge-hdmi@4c {
> - compatible = "ite,it66121";
> - reg = <0x4c>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&hdmi_gpio_pins_default>;
> - vcn33-supply = <&vdd_3v3>;
> - vcn18-supply = <&buck2_reg>;
> - vrf12-supply = <&buck3_reg>;
> - reset-gpios = <&main_gpio0 21 GPIO_ACTIVE_LOW>;
> - interrupt-parent = <&main_gpio0>;
> - interrupts = <36 IRQ_TYPE_EDGE_FALLING>;
> - #sound-dai-cells = <0>;
> -
> - ports {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - port@0 {
> - reg = <0>;
> -
> - it66121_in: endpoint {
> - bus-width = <24>;
> - remote-endpoint = <&dpi1_out>;
> - };
> - };
> -
> - port@1 {
> - reg = <1>;
> -
> - it66121_out: endpoint {
> - remote-endpoint = <&hdmi_connector_in>;
> - };
> - };
> - };
> - };
> -};
> -
> -&main_i2c3 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&mikrobus_i2c_pins_default>;
> - clock-frequency = <400000>;
> - status = "okay";
> -};
> -
> -&main_spi2 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&mikrobus_spi_pins_default>;
> - status = "okay";
> -};
> -
> -&sdhci0 {
> - bootph-all;
> - pinctrl-names = "default";
> - pinctrl-0 = <&emmc_pins_default>;
> - disable-wp;
> - status = "okay";
> -};
> -
> -&sdhci1 {
> - /* SD/MMC */
> - bootph-all;
> - pinctrl-names = "default";
> - pinctrl-0 = <&sd_pins_default>;
> -
> - vmmc-supply = <&vdd_3v3_sd>;
> - vqmmc-supply = <&vdd_sd_dv>;
> - disable-wp;
> - cd-gpios = <&main_gpio1 48 GPIO_ACTIVE_LOW>;
> - cd-debounce-delay-ms = <100>;
> - ti,fails-without-test-cd;
> - status = "okay";
> -};
> -
> -&sdhci2 {
> - vmmc-supply = <&wlan_en>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&wifi_pins_default>, <&wifi_32k_clk>;
> - non-removable;
> - ti,fails-without-test-cd;
> - cap-power-off-card;
> - keep-power-in-suspend;
> - assigned-clocks = <&k3_clks 157 158>;
> - assigned-clock-parents = <&k3_clks 157 160>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - status = "okay";
> -
> - wlcore: wlcore@2 {
> - compatible = "ti,wl1807";
> - reg = <2>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&wifi_wlirq_pins_default>;
> - interrupt-parent = <&main_gpio0>;
> - interrupts = <41 IRQ_TYPE_EDGE_FALLING>;
> - };
> -};
> -
> -&main_uart0 {
> - bootph-all;
> - pinctrl-names = "default";
> - pinctrl-0 = <&main_uart0_pins_default>;
> - status = "okay";
> -};
> -
> -&main_uart1 {
> - /* Main UART1 is used by TIFS firmware */
> - status = "reserved";
> -};
> -
> -&main_uart5 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&mikrobus_uart_pins_default>;
> - status = "okay";
> -};
> -
> -&main_uart6 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&wifi_debug_uart_pins_default>;
> - status = "okay";
> -
> - mcu {
> - compatible = "ti,cc1352p7";
> - reset-gpios = <&main_gpio0 72 GPIO_ACTIVE_LOW>;
> - vdds-supply = <&vdd_3v3>;
> - };
> -};
> -
> -&dss {
> - status = "okay";
> - pinctrl-names = "default";
> - pinctrl-0 = <&dss0_pins_default>;
> -};
> -
> -&dss_ports {
> - /* VP2: DPI Output */
> - port@1 {
> - reg = <1>;
> -
> - dpi1_out: endpoint {
> - remote-endpoint = <&it66121_in>;
> - };
> - };
> -};
> -
> -&mcasp1 {
> - status = "okay";
> - #sound-dai-cells = <0>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&mcasp_hdmi_pins_default>;
> - auxclk-fs-ratio = <2177>;
> - op-mode = <0>; /* MCASP_IIS_MODE */
> - tdm-slots = <2>;
> - serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
> - 1 0 0 0
> - 0 0 0 0
> - 0 0 0 0
> - 0 0 0 0
> - >;
> - tx-num-evt = <32>;
> - rx-num-evt = <32>;
> -};
> diff --git a/configs/am62x_beagleplay_a53_defconfig b/configs/am62x_beagleplay_a53_defconfig
> index ec62670d55d6..455dd86b2fc3 100644
> --- a/configs/am62x_beagleplay_a53_defconfig
> +++ b/configs/am62x_beagleplay_a53_defconfig
> @@ -10,7 +10,7 @@ CONFIG_TARGET_AM625_A53_BEAGLEPLAY=y
> CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
> CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80b80000
> CONFIG_DM_GPIO=y
> -CONFIG_DEFAULT_DEVICE_TREE="k3-am625-beagleplay"
> +CONFIG_DEFAULT_DEVICE_TREE="ti/k3-am625-beagleplay"
> CONFIG_SPL_TEXT_BASE=0x80080000
> CONFIG_OF_LIBFDT_OVERLAY=y
> CONFIG_DM_RESET=y
> @@ -58,6 +58,7 @@ CONFIG_CMD_PMIC=y
> CONFIG_CMD_REGULATOR=y
> CONFIG_OF_CONTROL=y
> CONFIG_SPL_OF_CONTROL=y
> +CONFIG_OF_UPSTREAM=y
> CONFIG_MULTI_DTB_FIT=y
> CONFIG_SPL_MULTI_DTB_FIT=y
> CONFIG_SPL_MULTI_DTB_FIT_NO_COMPRESSION=y
> --
> 2.43.0
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 0/3] arm: dts: am625/am62a7: Switch over to OF_UPSTREAM
2024-06-05 15:27 [PATCH 0/3] arm: dts: am625/am62a7: Switch over to OF_UPSTREAM Nishanth Menon
` (3 preceding siblings ...)
2024-06-05 18:41 ` [PATCH 0/3] arm: dts: am625/am62a7: Switch over " Dhruva Gole
@ 2024-06-06 18:46 ` Bryan Brattlof
2024-06-18 14:53 ` Tom Rini
5 siblings, 0 replies; 9+ messages in thread
From: Bryan Brattlof @ 2024-06-06 18:46 UTC (permalink / raw)
To: Nishanth Menon
Cc: Tom Rini, Dhruva Gole, Vignesh Raghavendra, Robert Nelson, u-boot
On June 5, 2024 thus sayeth Nishanth Menon:
> Cleanup am625 on by switching over the last two platforms (SK and
> beagleplay) over to OF_UPSTREAM, and while at it, switch over am62a7
> (last of the am62* family) over as well.
>
> This superscedes the previous version of beagleplay only patch[1]
>
> Test logs: https://gist.github.com/nmenon/ba310d3750a80789aca6a4fd90190135
>
> Nishanth Menon (3):
> arm: dts: am625_beagleplay: Switch to OF_UPSTREAM
> arm: dts: am625_sk: Switch to OF_UPSTREAM
> arm: dts: am62a7_sk: Switch to OF_UPSTREAM
Looks great to me
Reviewed-by: Bryan Brattlof <bb@ti.com>
~Bryan
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 2/3] arm: dts: am625_sk: Switch to OF_UPSTREAM
2024-06-05 15:27 ` [PATCH 2/3] arm: dts: am625_sk: " Nishanth Menon
@ 2024-06-07 7:18 ` Mattijs Korpershoek
0 siblings, 0 replies; 9+ messages in thread
From: Mattijs Korpershoek @ 2024-06-07 7:18 UTC (permalink / raw)
To: Nishanth Menon, Tom Rini
Cc: Dhruva Gole, Bryan Brattlof, Vignesh Raghavendra, Robert Nelson,
u-boot, Nishanth Menon
Hi Nishanth,
Thank you for the patch.
On mer., juin 05, 2024 at 10:27, Nishanth Menon <nm@ti.com> wrote:
> Enable OF_UPSTREAM for am625-sk board. Remove DT files that
> are now available in dts/upstream. Update the appended files based on
> version of latest OF_UPSTREAM sync point (v6.10-rc1).
>
> Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Boot tested to main U-Boot via DFU on AM62X SK EVM.
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
> ---
> arch/arm/dts/Makefile | 3 +-
> arch/arm/dts/k3-am62-main.dtsi | 1058 --------------------------
> arch/arm/dts/k3-am62-mcu.dtsi | 176 -----
> arch/arm/dts/k3-am62-thermal.dtsi | 36 -
> arch/arm/dts/k3-am62-wakeup.dtsi | 96 ---
> arch/arm/dts/k3-am62.dtsi | 122 ---
> arch/arm/dts/k3-am625-sk-binman.dtsi | 2 +-
> arch/arm/dts/k3-am625-sk.dts | 299 --------
> arch/arm/dts/k3-am625.dtsi | 155 ----
> arch/arm/dts/k3-am62x-sk-common.dtsi | 535 -------------
> configs/am62x_evm_a53_defconfig | 3 +-
> 11 files changed, 4 insertions(+), 2481 deletions(-)
> delete mode 100644 arch/arm/dts/k3-am62-main.dtsi
> delete mode 100644 arch/arm/dts/k3-am62-mcu.dtsi
> delete mode 100644 arch/arm/dts/k3-am62-thermal.dtsi
> delete mode 100644 arch/arm/dts/k3-am62-wakeup.dtsi
> delete mode 100644 arch/arm/dts/k3-am62.dtsi
> delete mode 100644 arch/arm/dts/k3-am625-sk.dts
> delete mode 100644 arch/arm/dts/k3-am625.dtsi
> delete mode 100644 arch/arm/dts/k3-am62x-sk-common.dtsi
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 813426a3e519..5b0bcf336924 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -1198,8 +1198,7 @@ dtb-$(CONFIG_SOC_K3_AM642) += k3-am642-r5-evm.dtb \
> k3-am642-r5-sk.dtb \
> k3-am642-r5-phycore-som-2gb.dtb
>
> -dtb-$(CONFIG_SOC_K3_AM625) += k3-am625-sk.dtb \
> - k3-am625-r5-sk.dtb \
> +dtb-$(CONFIG_SOC_K3_AM625) += k3-am625-r5-sk.dtb \
> k3-am625-r5-beagleplay.dtb \
> k3-am625-verdin-r5.dtb \
> k3-am625-r5-phycore-som-2gb.dtb
> diff --git a/arch/arm/dts/k3-am62-main.dtsi b/arch/arm/dts/k3-am62-main.dtsi
> deleted file mode 100644
> index e9cffca073ef..000000000000
> --- a/arch/arm/dts/k3-am62-main.dtsi
> +++ /dev/null
> @@ -1,1058 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only OR MIT
> -/*
> - * Device Tree Source for AM625 SoC Family Main Domain peripherals
> - *
> - * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/
> - */
> -
> -&cbass_main {
> - oc_sram: sram@70000000 {
> - compatible = "mmio-sram";
> - reg = <0x00 0x70000000 0x00 0x10000>;
> - #address-cells = <1>;
> - #size-cells = <1>;
> - ranges = <0x0 0x00 0x70000000 0x10000>;
> - };
> -
> - gic500: interrupt-controller@1800000 {
> - compatible = "arm,gic-v3";
> - #address-cells = <2>;
> - #size-cells = <2>;
> - ranges;
> - #interrupt-cells = <3>;
> - interrupt-controller;
> - reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */
> - <0x00 0x01880000 0x00 0xc0000>, /* GICR */
> - <0x00 0x01880000 0x00 0xc0000>, /* GICR */
> - <0x01 0x00000000 0x00 0x2000>, /* GICC */
> - <0x01 0x00010000 0x00 0x1000>, /* GICH */
> - <0x01 0x00020000 0x00 0x2000>; /* GICV */
> - /*
> - * vcpumntirq:
> - * virtual CPU interface maintenance interrupt
> - */
> - interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> -
> - gic_its: msi-controller@1820000 {
> - compatible = "arm,gic-v3-its";
> - reg = <0x00 0x01820000 0x00 0x10000>;
> - socionext,synquacer-pre-its = <0x1000000 0x400000>;
> - msi-controller;
> - #msi-cells = <1>;
> - };
> - };
> -
> - main_conf: bus@100000 {
> - compatible = "simple-bus";
> - #address-cells = <1>;
> - #size-cells = <1>;
> - ranges = <0x0 0x00 0x00100000 0x20000>;
> -
> - phy_gmii_sel: phy@4044 {
> - compatible = "ti,am654-phy-gmii-sel";
> - reg = <0x4044 0x8>;
> - #phy-cells = <1>;
> - };
> -
> - epwm_tbclk: clock-controller@4130 {
> - compatible = "ti,am62-epwm-tbclk";
> - reg = <0x4130 0x4>;
> - #clock-cells = <1>;
> - };
> -
> - audio_refclk0: clock-controller@82e0 {
> - compatible = "ti,am62-audio-refclk";
> - reg = <0x82e0 0x4>;
> - clocks = <&k3_clks 157 0>;
> - assigned-clocks = <&k3_clks 157 0>;
> - assigned-clock-parents = <&k3_clks 157 8>;
> - #clock-cells = <0>;
> - };
> -
> - audio_refclk1: clock-controller@82e4 {
> - compatible = "ti,am62-audio-refclk";
> - reg = <0x82e4 0x4>;
> - clocks = <&k3_clks 157 10>;
> - assigned-clocks = <&k3_clks 157 10>;
> - assigned-clock-parents = <&k3_clks 157 18>;
> - #clock-cells = <0>;
> - };
> - };
> -
> - dmss: bus@48000000 {
> - bootph-all;
> - compatible = "simple-bus";
> - #address-cells = <2>;
> - #size-cells = <2>;
> - dma-ranges;
> - ranges = <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>;
> -
> - ti,sci-dev-id = <25>;
> -
> - secure_proxy_main: mailbox@4d000000 {
> - bootph-all;
> - compatible = "ti,am654-secure-proxy";
> - #mbox-cells = <1>;
> - reg-names = "target_data", "rt", "scfg";
> - reg = <0x00 0x4d000000 0x00 0x80000>,
> - <0x00 0x4a600000 0x00 0x80000>,
> - <0x00 0x4a400000 0x00 0x80000>;
> - interrupt-names = "rx_012";
> - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
> - };
> -
> - inta_main_dmss: interrupt-controller@48000000 {
> - compatible = "ti,sci-inta";
> - reg = <0x00 0x48000000 0x00 0x100000>;
> - #interrupt-cells = <0>;
> - interrupt-controller;
> - interrupt-parent = <&gic500>;
> - msi-controller;
> - ti,sci = <&dmsc>;
> - ti,sci-dev-id = <28>;
> - ti,interrupt-ranges = <4 68 36>;
> - ti,unmapped-event-sources = <&main_bcdma>, <&main_pktdma>;
> - };
> -
> - main_bcdma: dma-controller@485c0100 {
> - compatible = "ti,am64-dmss-bcdma";
> - reg = <0x00 0x485c0100 0x00 0x100>,
> - <0x00 0x4c000000 0x00 0x20000>,
> - <0x00 0x4a820000 0x00 0x20000>,
> - <0x00 0x4aa40000 0x00 0x20000>,
> - <0x00 0x4bc00000 0x00 0x100000>,
> - <0x00 0x48600000 0x00 0x8000>,
> - <0x00 0x484a4000 0x00 0x2000>,
> - <0x00 0x484c2000 0x00 0x2000>,
> - <0x00 0x48420000 0x00 0x2000>;
> - reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt",
> - "ring", "tchan", "rchan", "bchan";
> - msi-parent = <&inta_main_dmss>;
> - #dma-cells = <3>;
> -
> - ti,sci = <&dmsc>;
> - ti,sci-dev-id = <26>;
> - ti,sci-rm-range-bchan = <0x20>; /* BLOCK_COPY_CHAN */
> - ti,sci-rm-range-rchan = <0x21>; /* SPLIT_TR_RX_CHAN */
> - ti,sci-rm-range-tchan = <0x22>; /* SPLIT_TR_TX_CHAN */
> - };
> -
> - main_pktdma: dma-controller@485c0000 {
> - compatible = "ti,am64-dmss-pktdma";
> - reg = <0x00 0x485c0000 0x00 0x100>,
> - <0x00 0x4a800000 0x00 0x20000>,
> - <0x00 0x4aa00000 0x00 0x40000>,
> - <0x00 0x4b800000 0x00 0x400000>,
> - <0x00 0x485e0000 0x00 0x10000>,
> - <0x00 0x484a0000 0x00 0x2000>,
> - <0x00 0x484c0000 0x00 0x2000>,
> - <0x00 0x48430000 0x00 0x1000>;
> - reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt",
> - "ring", "tchan", "rchan", "rflow";
> - msi-parent = <&inta_main_dmss>;
> - #dma-cells = <2>;
> -
> - ti,sci = <&dmsc>;
> - ti,sci-dev-id = <30>;
> - ti,sci-rm-range-tchan = <0x23>, /* UNMAPPED_TX_CHAN */
> - <0x24>, /* CPSW_TX_CHAN */
> - <0x25>, /* SAUL_TX_0_CHAN */
> - <0x26>; /* SAUL_TX_1_CHAN */
> - ti,sci-rm-range-tflow = <0x10>, /* RING_UNMAPPED_TX_CHAN */
> - <0x11>, /* RING_CPSW_TX_CHAN */
> - <0x12>, /* RING_SAUL_TX_0_CHAN */
> - <0x13>; /* RING_SAUL_TX_1_CHAN */
> - ti,sci-rm-range-rchan = <0x29>, /* UNMAPPED_RX_CHAN */
> - <0x2b>, /* CPSW_RX_CHAN */
> - <0x2d>, /* SAUL_RX_0_CHAN */
> - <0x2f>, /* SAUL_RX_1_CHAN */
> - <0x31>, /* SAUL_RX_2_CHAN */
> - <0x33>; /* SAUL_RX_3_CHAN */
> - ti,sci-rm-range-rflow = <0x2a>, /* FLOW_UNMAPPED_RX_CHAN */
> - <0x2c>, /* FLOW_CPSW_RX_CHAN */
> - <0x2e>, /* FLOW_SAUL_RX_0/1_CHAN */
> - <0x32>; /* FLOW_SAUL_RX_2/3_CHAN */
> - };
> - };
> -
> - dmsc: system-controller@44043000 {
> - bootph-all;
> - compatible = "ti,k2g-sci";
> - ti,host-id = <12>;
> - mbox-names = "rx", "tx";
> - mboxes = <&secure_proxy_main 12>,
> - <&secure_proxy_main 13>;
> - reg-names = "debug_messages";
> - reg = <0x00 0x44043000 0x00 0xfe0>;
> -
> - k3_pds: power-controller {
> - bootph-all;
> - compatible = "ti,sci-pm-domain";
> - #power-domain-cells = <2>;
> - };
> -
> - k3_clks: clock-controller {
> - bootph-all;
> - compatible = "ti,k2g-sci-clk";
> - #clock-cells = <2>;
> - };
> -
> - k3_reset: reset-controller {
> - bootph-all;
> - compatible = "ti,sci-reset";
> - #reset-cells = <2>;
> - };
> - };
> -
> - crypto: crypto@40900000 {
> - compatible = "ti,am62-sa3ul";
> - reg = <0x00 0x40900000 0x00 0x1200>;
> - #address-cells = <2>;
> - #size-cells = <2>;
> - ranges = <0x00 0x40900000 0x00 0x40900000 0x00 0x30000>;
> -
> - dmas = <&main_pktdma 0xf501 0>, <&main_pktdma 0x7506 0>,
> - <&main_pktdma 0x7507 0>;
> - dma-names = "tx", "rx1", "rx2";
> - };
> -
> - secure_proxy_sa3: mailbox@43600000 {
> - bootph-pre-ram;
> - compatible = "ti,am654-secure-proxy";
> - #mbox-cells = <1>;
> - reg-names = "target_data", "rt", "scfg";
> - reg = <0x00 0x43600000 0x00 0x10000>,
> - <0x00 0x44880000 0x00 0x20000>,
> - <0x00 0x44860000 0x00 0x20000>;
> - /*
> - * Marked Disabled:
> - * Node is incomplete as it is meant for bootloaders and
> - * firmware on non-MPU processors
> - */
> - status = "disabled";
> - };
> -
> - main_pmx0: pinctrl@f4000 {
> - bootph-all;
> - compatible = "pinctrl-single";
> - reg = <0x00 0xf4000 0x00 0x2ac>;
> - #pinctrl-cells = <1>;
> - pinctrl-single,register-width = <32>;
> - pinctrl-single,function-mask = <0xffffffff>;
> - };
> -
> - main_esm: esm@420000 {
> - bootph-pre-ram;
> - compatible = "ti,j721e-esm";
> - reg = <0x00 0x420000 0x00 0x1000>;
> - ti,esm-pins = <160>, <161>, <162>, <163>, <177>, <178>;
> - };
> -
> - main_timer0: timer@2400000 {
> - bootph-all;
> - compatible = "ti,am654-timer";
> - reg = <0x00 0x2400000 0x00 0x400>;
> - interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&k3_clks 36 2>;
> - clock-names = "fck";
> - assigned-clocks = <&k3_clks 36 2>;
> - assigned-clock-parents = <&k3_clks 36 3>;
> - power-domains = <&k3_pds 36 TI_SCI_PD_EXCLUSIVE>;
> - ti,timer-pwm;
> - };
> -
> - main_timer1: timer@2410000 {
> - compatible = "ti,am654-timer";
> - reg = <0x00 0x2410000 0x00 0x400>;
> - interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&k3_clks 37 2>;
> - clock-names = "fck";
> - assigned-clocks = <&k3_clks 37 2>;
> - assigned-clock-parents = <&k3_clks 37 3>;
> - power-domains = <&k3_pds 37 TI_SCI_PD_EXCLUSIVE>;
> - ti,timer-pwm;
> - };
> -
> - main_timer2: timer@2420000 {
> - compatible = "ti,am654-timer";
> - reg = <0x00 0x2420000 0x00 0x400>;
> - interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&k3_clks 38 2>;
> - clock-names = "fck";
> - assigned-clocks = <&k3_clks 38 2>;
> - assigned-clock-parents = <&k3_clks 38 3>;
> - power-domains = <&k3_pds 38 TI_SCI_PD_EXCLUSIVE>;
> - ti,timer-pwm;
> - };
> -
> - main_timer3: timer@2430000 {
> - compatible = "ti,am654-timer";
> - reg = <0x00 0x2430000 0x00 0x400>;
> - interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&k3_clks 39 2>;
> - clock-names = "fck";
> - assigned-clocks = <&k3_clks 39 2>;
> - assigned-clock-parents = <&k3_clks 39 3>;
> - power-domains = <&k3_pds 39 TI_SCI_PD_EXCLUSIVE>;
> - ti,timer-pwm;
> - };
> -
> - main_timer4: timer@2440000 {
> - compatible = "ti,am654-timer";
> - reg = <0x00 0x2440000 0x00 0x400>;
> - interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&k3_clks 40 2>;
> - clock-names = "fck";
> - assigned-clocks = <&k3_clks 40 2>;
> - assigned-clock-parents = <&k3_clks 40 3>;
> - power-domains = <&k3_pds 40 TI_SCI_PD_EXCLUSIVE>;
> - ti,timer-pwm;
> - };
> -
> - main_timer5: timer@2450000 {
> - compatible = "ti,am654-timer";
> - reg = <0x00 0x2450000 0x00 0x400>;
> - interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&k3_clks 41 2>;
> - clock-names = "fck";
> - assigned-clocks = <&k3_clks 41 2>;
> - assigned-clock-parents = <&k3_clks 41 3>;
> - power-domains = <&k3_pds 41 TI_SCI_PD_EXCLUSIVE>;
> - ti,timer-pwm;
> - };
> -
> - main_timer6: timer@2460000 {
> - compatible = "ti,am654-timer";
> - reg = <0x00 0x2460000 0x00 0x400>;
> - interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&k3_clks 42 2>;
> - clock-names = "fck";
> - assigned-clocks = <&k3_clks 42 2>;
> - assigned-clock-parents = <&k3_clks 42 3>;
> - power-domains = <&k3_pds 42 TI_SCI_PD_EXCLUSIVE>;
> - ti,timer-pwm;
> - };
> -
> - main_timer7: timer@2470000 {
> - compatible = "ti,am654-timer";
> - reg = <0x00 0x2470000 0x00 0x400>;
> - interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&k3_clks 43 2>;
> - clock-names = "fck";
> - assigned-clocks = <&k3_clks 43 2>;
> - assigned-clock-parents = <&k3_clks 43 3>;
> - power-domains = <&k3_pds 43 TI_SCI_PD_EXCLUSIVE>;
> - ti,timer-pwm;
> - };
> -
> - main_uart0: serial@2800000 {
> - compatible = "ti,am64-uart", "ti,am654-uart";
> - reg = <0x00 0x02800000 0x00 0x100>;
> - interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
> - power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
> - clocks = <&k3_clks 146 0>;
> - clock-names = "fclk";
> - status = "disabled";
> - };
> -
> - main_uart1: serial@2810000 {
> - compatible = "ti,am64-uart", "ti,am654-uart";
> - reg = <0x00 0x02810000 0x00 0x100>;
> - interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
> - power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>;
> - clocks = <&k3_clks 152 0>;
> - clock-names = "fclk";
> - status = "disabled";
> - };
> -
> - main_uart2: serial@2820000 {
> - compatible = "ti,am64-uart", "ti,am654-uart";
> - reg = <0x00 0x02820000 0x00 0x100>;
> - interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
> - power-domains = <&k3_pds 153 TI_SCI_PD_EXCLUSIVE>;
> - clocks = <&k3_clks 153 0>;
> - clock-names = "fclk";
> - status = "disabled";
> - };
> -
> - main_uart3: serial@2830000 {
> - compatible = "ti,am64-uart", "ti,am654-uart";
> - reg = <0x00 0x02830000 0x00 0x100>;
> - interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
> - power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>;
> - clocks = <&k3_clks 154 0>;
> - clock-names = "fclk";
> - status = "disabled";
> - };
> -
> - main_uart4: serial@2840000 {
> - compatible = "ti,am64-uart", "ti,am654-uart";
> - reg = <0x00 0x02840000 0x00 0x100>;
> - interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
> - power-domains = <&k3_pds 155 TI_SCI_PD_EXCLUSIVE>;
> - clocks = <&k3_clks 155 0>;
> - clock-names = "fclk";
> - status = "disabled";
> - };
> -
> - main_uart5: serial@2850000 {
> - compatible = "ti,am64-uart", "ti,am654-uart";
> - reg = <0x00 0x02850000 0x00 0x100>;
> - interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
> - power-domains = <&k3_pds 156 TI_SCI_PD_EXCLUSIVE>;
> - clocks = <&k3_clks 156 0>;
> - clock-names = "fclk";
> - status = "disabled";
> - };
> -
> - main_uart6: serial@2860000 {
> - compatible = "ti,am64-uart", "ti,am654-uart";
> - reg = <0x00 0x02860000 0x00 0x100>;
> - interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
> - power-domains = <&k3_pds 158 TI_SCI_PD_EXCLUSIVE>;
> - clocks = <&k3_clks 158 0>;
> - clock-names = "fclk";
> - status = "disabled";
> - };
> -
> - main_i2c0: i2c@20000000 {
> - compatible = "ti,am64-i2c", "ti,omap4-i2c";
> - reg = <0x00 0x20000000 0x00 0x100>;
> - interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>;
> - clocks = <&k3_clks 102 2>;
> - clock-names = "fck";
> - status = "disabled";
> - };
> -
> - main_i2c1: i2c@20010000 {
> - compatible = "ti,am64-i2c", "ti,omap4-i2c";
> - reg = <0x00 0x20010000 0x00 0x100>;
> - interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>;
> - clocks = <&k3_clks 103 2>;
> - clock-names = "fck";
> - status = "disabled";
> - };
> -
> - main_i2c2: i2c@20020000 {
> - compatible = "ti,am64-i2c", "ti,omap4-i2c";
> - reg = <0x00 0x20020000 0x00 0x100>;
> - interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>;
> - clocks = <&k3_clks 104 2>;
> - clock-names = "fck";
> - status = "disabled";
> - };
> -
> - main_i2c3: i2c@20030000 {
> - compatible = "ti,am64-i2c", "ti,omap4-i2c";
> - reg = <0x00 0x20030000 0x00 0x100>;
> - interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
> - clocks = <&k3_clks 105 2>;
> - clock-names = "fck";
> - status = "disabled";
> - };
> -
> - main_spi0: spi@20100000 {
> - compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
> - reg = <0x00 0x20100000 0x00 0x400>;
> - interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - power-domains = <&k3_pds 141 TI_SCI_PD_EXCLUSIVE>;
> - clocks = <&k3_clks 141 0>;
> - status = "disabled";
> - };
> -
> - main_spi1: spi@20110000 {
> - compatible = "ti,am654-mcspi","ti,omap4-mcspi";
> - reg = <0x00 0x20110000 0x00 0x400>;
> - interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - power-domains = <&k3_pds 142 TI_SCI_PD_EXCLUSIVE>;
> - clocks = <&k3_clks 142 0>;
> - status = "disabled";
> - };
> -
> - main_spi2: spi@20120000 {
> - compatible = "ti,am654-mcspi","ti,omap4-mcspi";
> - reg = <0x00 0x20120000 0x00 0x400>;
> - interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - power-domains = <&k3_pds 143 TI_SCI_PD_EXCLUSIVE>;
> - clocks = <&k3_clks 143 0>;
> - status = "disabled";
> - };
> -
> - main_gpio_intr: interrupt-controller@a00000 {
> - compatible = "ti,sci-intr";
> - reg = <0x00 0x00a00000 0x00 0x800>;
> - ti,intr-trigger-type = <1>;
> - interrupt-controller;
> - interrupt-parent = <&gic500>;
> - #interrupt-cells = <1>;
> - ti,sci = <&dmsc>;
> - ti,sci-dev-id = <3>;
> - ti,interrupt-ranges = <0 32 16>;
> - };
> -
> - main_gpio0: gpio@600000 {
> - compatible = "ti,am64-gpio", "ti,keystone-gpio";
> - reg = <0x0 0x00600000 0x0 0x100>;
> - gpio-ranges = <&main_pmx0 0 0 32>,
> - <&main_pmx0 32 33 38>,
> - <&main_pmx0 70 72 22>;
> - gpio-controller;
> - #gpio-cells = <2>;
> - interrupt-parent = <&main_gpio_intr>;
> - interrupts = <190>, <191>, <192>,
> - <193>, <194>, <195>;
> - interrupt-controller;
> - #interrupt-cells = <2>;
> - ti,ngpio = <92>;
> - ti,davinci-gpio-unbanked = <0>;
> - power-domains = <&k3_pds 77 TI_SCI_PD_EXCLUSIVE>;
> - clocks = <&k3_clks 77 0>;
> - clock-names = "gpio";
> - };
> -
> - main_gpio1: gpio@601000 {
> - compatible = "ti,am64-gpio", "ti,keystone-gpio";
> - reg = <0x0 0x00601000 0x0 0x100>;
> - gpio-controller;
> - gpio-ranges = <&main_pmx0 0 94 41>,
> - <&main_pmx0 41 136 6>,
> - <&main_pmx0 47 143 3>,
> - <&main_pmx0 50 149 2>;
> - #gpio-cells = <2>;
> - interrupt-parent = <&main_gpio_intr>;
> - interrupts = <180>, <181>, <182>,
> - <183>, <184>, <185>;
> - interrupt-controller;
> - #interrupt-cells = <2>;
> - ti,ngpio = <52>;
> - ti,davinci-gpio-unbanked = <0>;
> - power-domains = <&k3_pds 78 TI_SCI_PD_EXCLUSIVE>;
> - clocks = <&k3_clks 78 0>;
> - clock-names = "gpio";
> - };
> -
> - sdhci0: mmc@fa10000 {
> - compatible = "ti,am62-sdhci";
> - reg = <0x00 0x0fa10000 0x00 0x1000>, <0x00 0x0fa18000 0x00 0x400>;
> - interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
> - power-domains = <&k3_pds 57 TI_SCI_PD_EXCLUSIVE>;
> - clocks = <&k3_clks 57 5>, <&k3_clks 57 6>;
> - clock-names = "clk_ahb", "clk_xin";
> - assigned-clocks = <&k3_clks 57 6>;
> - assigned-clock-parents = <&k3_clks 57 8>;
> - bus-width = <8>;
> - mmc-ddr-1_8v;
> - mmc-hs200-1_8v;
> - ti,clkbuf-sel = <0x7>;
> - ti,otap-del-sel-legacy = <0x0>;
> - ti,otap-del-sel-mmc-hs = <0x0>;
> - ti,otap-del-sel-ddr52 = <0x5>;
> - ti,otap-del-sel-hs200 = <0x5>;
> - ti,itap-del-sel-legacy = <0xa>;
> - ti,itap-del-sel-mmc-hs = <0x1>;
> - status = "disabled";
> - };
> -
> - sdhci1: mmc@fa00000 {
> - compatible = "ti,am62-sdhci";
> - reg = <0x00 0x0fa00000 0x00 0x1000>, <0x00 0x0fa08000 0x00 0x400>;
> - interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> - power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
> - clocks = <&k3_clks 58 5>, <&k3_clks 58 6>;
> - clock-names = "clk_ahb", "clk_xin";
> - bus-width = <4>;
> - ti,clkbuf-sel = <0x7>;
> - ti,otap-del-sel-legacy = <0x8>;
> - ti,otap-del-sel-sd-hs = <0x0>;
> - ti,otap-del-sel-sdr12 = <0x0>;
> - ti,otap-del-sel-sdr25 = <0x0>;
> - ti,otap-del-sel-sdr50 = <0x8>;
> - ti,otap-del-sel-sdr104 = <0x7>;
> - ti,otap-del-sel-ddr50 = <0x4>;
> - ti,itap-del-sel-legacy = <0xa>;
> - ti,itap-del-sel-sd-hs = <0x1>;
> - ti,itap-del-sel-sdr12 = <0xa>;
> - ti,itap-del-sel-sdr25 = <0x1>;
> - status = "disabled";
> - };
> -
> - sdhci2: mmc@fa20000 {
> - compatible = "ti,am62-sdhci";
> - reg = <0x00 0x0fa20000 0x00 0x1000>, <0x00 0x0fa28000 0x00 0x400>;
> - interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
> - power-domains = <&k3_pds 184 TI_SCI_PD_EXCLUSIVE>;
> - clocks = <&k3_clks 184 5>, <&k3_clks 184 6>;
> - clock-names = "clk_ahb", "clk_xin";
> - bus-width = <4>;
> - ti,clkbuf-sel = <0x7>;
> - ti,otap-del-sel-legacy = <0x8>;
> - ti,otap-del-sel-sd-hs = <0x0>;
> - ti,otap-del-sel-sdr12 = <0x0>;
> - ti,otap-del-sel-sdr25 = <0x0>;
> - ti,otap-del-sel-sdr50 = <0x8>;
> - ti,otap-del-sel-sdr104 = <0x7>;
> - ti,otap-del-sel-ddr50 = <0x8>;
> - ti,itap-del-sel-legacy = <0xa>;
> - ti,itap-del-sel-sd-hs = <0xa>;
> - ti,itap-del-sel-sdr12 = <0xa>;
> - ti,itap-del-sel-sdr25 = <0x1>;
> - status = "disabled";
> - };
> -
> - usbss0: dwc3-usb@f900000 {
> - compatible = "ti,am62-usb";
> - reg = <0x00 0x0f900000 0x00 0x800>;
> - clocks = <&k3_clks 161 3>;
> - clock-names = "ref";
> - ti,syscon-phy-pll-refclk = <&wkup_conf 0x4008>;
> - #address-cells = <2>;
> - #size-cells = <2>;
> - power-domains = <&k3_pds 178 TI_SCI_PD_EXCLUSIVE>;
> - ranges;
> - status = "disabled";
> -
> - usb0: usb@31000000 {
> - compatible = "snps,dwc3";
> - reg = <0x00 0x31000000 0x00 0x50000>;
> - interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
> - <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */
> - interrupt-names = "host", "peripheral";
> - maximum-speed = "high-speed";
> - dr_mode = "otg";
> - snps,usb2-gadget-lpm-disable;
> - snps,usb2-lpm-disable;
> - };
> - };
> -
> - usbss1: dwc3-usb@f910000 {
> - compatible = "ti,am62-usb";
> - reg = <0x00 0x0f910000 0x00 0x800>;
> - clocks = <&k3_clks 162 3>;
> - clock-names = "ref";
> - ti,syscon-phy-pll-refclk = <&wkup_conf 0x4018>;
> - #address-cells = <2>;
> - #size-cells = <2>;
> - power-domains = <&k3_pds 179 TI_SCI_PD_EXCLUSIVE>;
> - ranges;
> - status = "disabled";
> -
> - usb1: usb@31100000 {
> - compatible = "snps,dwc3";
> - reg = <0x00 0x31100000 0x00 0x50000>;
> - interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
> - <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */
> - interrupt-names = "host", "peripheral";
> - maximum-speed = "high-speed";
> - dr_mode = "otg";
> - snps,usb2-gadget-lpm-disable;
> - snps,usb2-lpm-disable;
> - };
> - };
> -
> - fss: bus@fc00000 {
> - compatible = "simple-bus";
> - reg = <0x00 0x0fc00000 0x00 0x70000>;
> - #address-cells = <2>;
> - #size-cells = <2>;
> - ranges;
> -
> - ospi0: spi@fc40000 {
> - compatible = "ti,am654-ospi", "cdns,qspi-nor";
> - reg = <0x00 0x0fc40000 0x00 0x100>,
> - <0x05 0x00000000 0x01 0x00000000>;
> - interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
> - cdns,fifo-depth = <256>;
> - cdns,fifo-width = <4>;
> - cdns,trigger-address = <0x0>;
> - clocks = <&k3_clks 75 7>;
> - assigned-clocks = <&k3_clks 75 7>;
> - assigned-clock-parents = <&k3_clks 75 8>;
> - assigned-clock-rates = <166666666>;
> - power-domains = <&k3_pds 75 TI_SCI_PD_EXCLUSIVE>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - status = "disabled";
> - };
> - };
> -
> - gpu: gpu@fd00000 {
> - compatible = "ti,am62-gpu", "img,img-axe";
> - reg = <0x00 0x0fd00000 0x00 0x20000>;
> - clocks = <&k3_clks 187 0>;
> - clock-names = "core";
> - interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
> - power-domains = <&k3_pds 187 TI_SCI_PD_EXCLUSIVE>;
> - };
> -
> - cpsw3g: ethernet@8000000 {
> - compatible = "ti,am642-cpsw-nuss";
> - #address-cells = <2>;
> - #size-cells = <2>;
> - reg = <0x00 0x08000000 0x00 0x200000>;
> - reg-names = "cpsw_nuss";
> - ranges = <0x00 0x00 0x00 0x08000000 0x00 0x200000>;
> - clocks = <&k3_clks 13 0>;
> - assigned-clocks = <&k3_clks 13 3>;
> - assigned-clock-parents = <&k3_clks 13 11>;
> - clock-names = "fck";
> - power-domains = <&k3_pds 13 TI_SCI_PD_EXCLUSIVE>;
> -
> - dmas = <&main_pktdma 0xc600 15>,
> - <&main_pktdma 0xc601 15>,
> - <&main_pktdma 0xc602 15>,
> - <&main_pktdma 0xc603 15>,
> - <&main_pktdma 0xc604 15>,
> - <&main_pktdma 0xc605 15>,
> - <&main_pktdma 0xc606 15>,
> - <&main_pktdma 0xc607 15>,
> - <&main_pktdma 0x4600 15>;
> - dma-names = "tx0", "tx1", "tx2", "tx3", "tx4", "tx5", "tx6",
> - "tx7", "rx";
> -
> - ethernet-ports {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - cpsw_port1: port@1 {
> - reg = <1>;
> - ti,mac-only;
> - label = "port1";
> - phys = <&phy_gmii_sel 1>;
> - mac-address = [00 00 00 00 00 00];
> - ti,syscon-efuse = <&wkup_conf 0x200>;
> - };
> -
> - cpsw_port2: port@2 {
> - reg = <2>;
> - ti,mac-only;
> - label = "port2";
> - phys = <&phy_gmii_sel 2>;
> - mac-address = [00 00 00 00 00 00];
> - };
> - };
> -
> - cpsw3g_mdio: mdio@f00 {
> - compatible = "ti,cpsw-mdio","ti,davinci_mdio";
> - reg = <0x00 0xf00 0x00 0x100>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - clocks = <&k3_clks 13 0>;
> - clock-names = "fck";
> - bus_freq = <1000000>;
> - status = "disabled";
> - };
> -
> - cpts@3d000 {
> - compatible = "ti,j721e-cpts";
> - reg = <0x00 0x3d000 0x00 0x400>;
> - clocks = <&k3_clks 13 3>;
> - clock-names = "cpts";
> - interrupts-extended = <&gic500 GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
> - interrupt-names = "cpts";
> - ti,cpts-ext-ts-inputs = <4>;
> - ti,cpts-periodic-outputs = <2>;
> - };
> - };
> -
> - dss: dss@30200000 {
> - compatible = "ti,am625-dss";
> - reg = <0x00 0x30200000 0x00 0x1000>, /* common */
> - <0x00 0x30202000 0x00 0x1000>, /* vidl1 */
> - <0x00 0x30206000 0x00 0x1000>, /* vid */
> - <0x00 0x30207000 0x00 0x1000>, /* ovr1 */
> - <0x00 0x30208000 0x00 0x1000>, /* ovr2 */
> - <0x00 0x3020a000 0x00 0x1000>, /* vp1: Used for OLDI */
> - <0x00 0x3020b000 0x00 0x1000>, /* vp2: Used as DPI Out */
> - <0x00 0x30201000 0x00 0x1000>; /* common1 */
> - reg-names = "common", "vidl1", "vid",
> - "ovr1", "ovr2", "vp1", "vp2", "common1";
> - power-domains = <&k3_pds 186 TI_SCI_PD_EXCLUSIVE>;
> - clocks = <&k3_clks 186 6>,
> - <&dss_vp1_clk>,
> - <&k3_clks 186 2>;
> - clock-names = "fck", "vp1", "vp2";
> - interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
> - status = "disabled";
> -
> - dss_ports: ports {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - };
> - };
> -
> - hwspinlock: spinlock@2a000000 {
> - compatible = "ti,am64-hwspinlock";
> - reg = <0x00 0x2a000000 0x00 0x1000>;
> - #hwlock-cells = <1>;
> - };
> -
> - mailbox0_cluster0: mailbox@29000000 {
> - compatible = "ti,am64-mailbox";
> - reg = <0x00 0x29000000 0x00 0x200>;
> - interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
> - #mbox-cells = <1>;
> - ti,mbox-num-users = <4>;
> - ti,mbox-num-fifos = <16>;
> - };
> -
> - ecap0: pwm@23100000 {
> - compatible = "ti,am3352-ecap";
> - #pwm-cells = <3>;
> - reg = <0x00 0x23100000 0x00 0x100>;
> - power-domains = <&k3_pds 51 TI_SCI_PD_EXCLUSIVE>;
> - clocks = <&k3_clks 51 0>;
> - clock-names = "fck";
> - status = "disabled";
> - };
> -
> - ecap1: pwm@23110000 {
> - compatible = "ti,am3352-ecap";
> - #pwm-cells = <3>;
> - reg = <0x00 0x23110000 0x00 0x100>;
> - power-domains = <&k3_pds 52 TI_SCI_PD_EXCLUSIVE>;
> - clocks = <&k3_clks 52 0>;
> - clock-names = "fck";
> - status = "disabled";
> - };
> -
> - ecap2: pwm@23120000 {
> - compatible = "ti,am3352-ecap";
> - #pwm-cells = <3>;
> - reg = <0x00 0x23120000 0x00 0x100>;
> - power-domains = <&k3_pds 53 TI_SCI_PD_EXCLUSIVE>;
> - clocks = <&k3_clks 53 0>;
> - clock-names = "fck";
> - status = "disabled";
> - };
> -
> - main_mcan0: can@20701000 {
> - compatible = "bosch,m_can";
> - reg = <0x00 0x20701000 0x00 0x200>,
> - <0x00 0x20708000 0x00 0x8000>;
> - reg-names = "m_can", "message_ram";
> - power-domains = <&k3_pds 98 TI_SCI_PD_EXCLUSIVE>;
> - clocks = <&k3_clks 98 6>, <&k3_clks 98 1>;
> - clock-names = "hclk", "cclk";
> - interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
> - interrupt-names = "int0", "int1";
> - bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
> - status = "disabled";
> - };
> -
> - main_rti0: watchdog@e000000 {
> - compatible = "ti,j7-rti-wdt";
> - reg = <0x00 0x0e000000 0x00 0x100>;
> - clocks = <&k3_clks 125 0>;
> - power-domains = <&k3_pds 125 TI_SCI_PD_EXCLUSIVE>;
> - assigned-clocks = <&k3_clks 125 0>;
> - assigned-clock-parents = <&k3_clks 125 2>;
> - };
> -
> - main_rti1: watchdog@e010000 {
> - compatible = "ti,j7-rti-wdt";
> - reg = <0x00 0x0e010000 0x00 0x100>;
> - clocks = <&k3_clks 126 0>;
> - power-domains = <&k3_pds 126 TI_SCI_PD_EXCLUSIVE>;
> - assigned-clocks = <&k3_clks 126 0>;
> - assigned-clock-parents = <&k3_clks 126 2>;
> - };
> -
> - main_rti2: watchdog@e020000 {
> - compatible = "ti,j7-rti-wdt";
> - reg = <0x00 0x0e020000 0x00 0x100>;
> - clocks = <&k3_clks 127 0>;
> - power-domains = <&k3_pds 127 TI_SCI_PD_EXCLUSIVE>;
> - assigned-clocks = <&k3_clks 127 0>;
> - assigned-clock-parents = <&k3_clks 127 2>;
> - };
> -
> - main_rti3: watchdog@e030000 {
> - compatible = "ti,j7-rti-wdt";
> - reg = <0x00 0x0e030000 0x00 0x100>;
> - clocks = <&k3_clks 128 0>;
> - power-domains = <&k3_pds 128 TI_SCI_PD_EXCLUSIVE>;
> - assigned-clocks = <&k3_clks 128 0>;
> - assigned-clock-parents = <&k3_clks 128 2>;
> - };
> -
> - main_rti15: watchdog@e0f0000 {
> - compatible = "ti,j7-rti-wdt";
> - reg = <0x00 0x0e0f0000 0x00 0x100>;
> - clocks = <&k3_clks 130 0>;
> - power-domains = <&k3_pds 130 TI_SCI_PD_EXCLUSIVE>;
> - assigned-clocks = <&k3_clks 130 0>;
> - assigned-clock-parents = <&k3_clks 130 2>;
> - };
> -
> - epwm0: pwm@23000000 {
> - compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
> - #pwm-cells = <3>;
> - reg = <0x00 0x23000000 0x00 0x100>;
> - power-domains = <&k3_pds 86 TI_SCI_PD_EXCLUSIVE>;
> - clocks = <&epwm_tbclk 0>, <&k3_clks 86 0>;
> - clock-names = "tbclk", "fck";
> - status = "disabled";
> - };
> -
> - epwm1: pwm@23010000 {
> - compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
> - #pwm-cells = <3>;
> - reg = <0x00 0x23010000 0x00 0x100>;
> - power-domains = <&k3_pds 87 TI_SCI_PD_EXCLUSIVE>;
> - clocks = <&epwm_tbclk 1>, <&k3_clks 87 0>;
> - clock-names = "tbclk", "fck";
> - status = "disabled";
> - };
> -
> - epwm2: pwm@23020000 {
> - compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
> - #pwm-cells = <3>;
> - reg = <0x00 0x23020000 0x00 0x100>;
> - power-domains = <&k3_pds 88 TI_SCI_PD_EXCLUSIVE>;
> - clocks = <&epwm_tbclk 2>, <&k3_clks 88 0>;
> - clock-names = "tbclk", "fck";
> - status = "disabled";
> - };
> -
> - mcasp0: audio-controller@2b00000 {
> - compatible = "ti,am33xx-mcasp-audio";
> - reg = <0x00 0x02b00000 0x00 0x2000>,
> - <0x00 0x02b08000 0x00 0x400>;
> - reg-names = "mpu", "dat";
> - interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
> - interrupt-names = "tx", "rx";
> -
> - dmas = <&main_bcdma 0 0xc500 0>, <&main_bcdma 0 0x4500 0>;
> - dma-names = "tx", "rx";
> -
> - clocks = <&k3_clks 190 0>;
> - clock-names = "fck";
> - assigned-clocks = <&k3_clks 190 0>;
> - assigned-clock-parents = <&k3_clks 190 2>;
> - power-domains = <&k3_pds 190 TI_SCI_PD_EXCLUSIVE>;
> - status = "disabled";
> - };
> -
> - mcasp1: audio-controller@2b10000 {
> - compatible = "ti,am33xx-mcasp-audio";
> - reg = <0x00 0x02b10000 0x00 0x2000>,
> - <0x00 0x02b18000 0x00 0x400>;
> - reg-names = "mpu", "dat";
> - interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>;
> - interrupt-names = "tx", "rx";
> -
> - dmas = <&main_bcdma 0 0xc501 0>, <&main_bcdma 0 0x4501 0>;
> - dma-names = "tx", "rx";
> -
> - clocks = <&k3_clks 191 0>;
> - clock-names = "fck";
> - assigned-clocks = <&k3_clks 191 0>;
> - assigned-clock-parents = <&k3_clks 191 2>;
> - power-domains = <&k3_pds 191 TI_SCI_PD_EXCLUSIVE>;
> - status = "disabled";
> - };
> -
> - mcasp2: audio-controller@2b20000 {
> - compatible = "ti,am33xx-mcasp-audio";
> - reg = <0x00 0x02b20000 0x00 0x2000>,
> - <0x00 0x02b28000 0x00 0x400>;
> - reg-names = "mpu", "dat";
> - interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
> - interrupt-names = "tx", "rx";
> -
> - dmas = <&main_bcdma 0 0xc502 0>, <&main_bcdma 0 0x4502 0>;
> - dma-names = "tx", "rx";
> -
> - clocks = <&k3_clks 192 0>;
> - clock-names = "fck";
> - assigned-clocks = <&k3_clks 192 0>;
> - assigned-clock-parents = <&k3_clks 192 2>;
> - power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>;
> - status = "disabled";
> - };
> -
> - ti_csi2rx0: ticsi2rx@30102000 {
> - compatible = "ti,j721e-csi2rx-shim";
> - dmas = <&main_bcdma 0 0x4700 0>;
> - dma-names = "rx0";
> - reg = <0x00 0x30102000 0x00 0x1000>;
> - power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>;
> - #address-cells = <2>;
> - #size-cells = <2>;
> - ranges;
> - status = "disabled";
> -
> - cdns_csi2rx0: csi-bridge@30101000 {
> - compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
> - reg = <0x00 0x30101000 0x00 0x1000>;
> - clocks = <&k3_clks 182 0>, <&k3_clks 182 3>, <&k3_clks 182 0>,
> - <&k3_clks 182 0>, <&k3_clks 182 4>, <&k3_clks 182 4>;
> - clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
> - "pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk";
> - phys = <&dphy0>;
> - phy-names = "dphy";
> -
> - ports {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - csi0_port0: port@0 {
> - reg = <0>;
> - status = "disabled";
> - };
> -
> - csi0_port1: port@1 {
> - reg = <1>;
> - status = "disabled";
> - };
> -
> - csi0_port2: port@2 {
> - reg = <2>;
> - status = "disabled";
> - };
> -
> - csi0_port3: port@3 {
> - reg = <3>;
> - status = "disabled";
> - };
> -
> - csi0_port4: port@4 {
> - reg = <4>;
> - status = "disabled";
> - };
> - };
> - };
> - };
> -
> - dphy0: phy@30110000 {
> - compatible = "cdns,dphy-rx";
> - reg = <0x00 0x30110000 0x00 0x1100>;
> - #phy-cells = <0>;
> - power-domains = <&k3_pds 185 TI_SCI_PD_EXCLUSIVE>;
> - status = "disabled";
> - };
> -
> -};
> diff --git a/arch/arm/dts/k3-am62-mcu.dtsi b/arch/arm/dts/k3-am62-mcu.dtsi
> deleted file mode 100644
> index e66d486ef1f2..000000000000
> --- a/arch/arm/dts/k3-am62-mcu.dtsi
> +++ /dev/null
> @@ -1,176 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only OR MIT
> -/*
> - * Device Tree Source for AM625 SoC Family MCU Domain peripherals
> - *
> - * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/
> - */
> -
> -&cbass_mcu {
> - mcu_pmx0: pinctrl@4084000 {
> - bootph-all;
> - compatible = "pinctrl-single";
> - reg = <0x00 0x04084000 0x00 0x88>;
> - #pinctrl-cells = <1>;
> - pinctrl-single,register-width = <32>;
> - pinctrl-single,function-mask = <0xffffffff>;
> - };
> -
> - mcu_esm: esm@4100000 {
> - bootph-pre-ram;
> - compatible = "ti,j721e-esm";
> - reg = <0x00 0x4100000 0x00 0x1000>;
> - ti,esm-pins = <0>, <1>, <2>, <85>;
> - };
> -
> - /*
> - * The MCU domain timer interrupts are routed only to the ESM module,
> - * and not currently available for Linux. The MCU domain timers are
> - * of limited use without interrupts, and likely reserved by the ESM.
> - */
> - mcu_timer0: timer@4800000 {
> - compatible = "ti,am654-timer";
> - reg = <0x00 0x4800000 0x00 0x400>;
> - clocks = <&k3_clks 35 2>;
> - clock-names = "fck";
> - power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>;
> - ti,timer-pwm;
> - status = "reserved";
> - };
> -
> - mcu_timer1: timer@4810000 {
> - compatible = "ti,am654-timer";
> - reg = <0x00 0x4810000 0x00 0x400>;
> - clocks = <&k3_clks 48 2>;
> - clock-names = "fck";
> - power-domains = <&k3_pds 48 TI_SCI_PD_EXCLUSIVE>;
> - ti,timer-pwm;
> - status = "reserved";
> - };
> -
> - mcu_timer2: timer@4820000 {
> - compatible = "ti,am654-timer";
> - reg = <0x00 0x4820000 0x00 0x400>;
> - clocks = <&k3_clks 49 2>;
> - clock-names = "fck";
> - power-domains = <&k3_pds 49 TI_SCI_PD_EXCLUSIVE>;
> - ti,timer-pwm;
> - status = "reserved";
> - };
> -
> - mcu_timer3: timer@4830000 {
> - compatible = "ti,am654-timer";
> - reg = <0x00 0x4830000 0x00 0x400>;
> - clocks = <&k3_clks 50 2>;
> - clock-names = "fck";
> - power-domains = <&k3_pds 50 TI_SCI_PD_EXCLUSIVE>;
> - ti,timer-pwm;
> - status = "reserved";
> - };
> -
> - mcu_uart0: serial@4a00000 {
> - compatible = "ti,am64-uart", "ti,am654-uart";
> - reg = <0x00 0x04a00000 0x00 0x100>;
> - interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
> - power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
> - clocks = <&k3_clks 149 0>;
> - clock-names = "fclk";
> - status = "disabled";
> - };
> -
> - mcu_i2c0: i2c@4900000 {
> - compatible = "ti,am64-i2c", "ti,omap4-i2c";
> - reg = <0x00 0x04900000 0x00 0x100>;
> - interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>;
> - clocks = <&k3_clks 106 2>;
> - clock-names = "fck";
> - status = "disabled";
> - };
> -
> - mcu_spi0: spi@4b00000 {
> - compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
> - reg = <0x00 0x04b00000 0x00 0x400>;
> - interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>;
> - clocks = <&k3_clks 147 0>;
> - status = "disabled";
> - };
> -
> - mcu_spi1: spi@4b10000 {
> - compatible = "ti,am654-mcspi","ti,omap4-mcspi";
> - reg = <0x00 0x04b10000 0x00 0x400>;
> - interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>;
> - clocks = <&k3_clks 148 0>;
> - status = "disabled";
> - };
> -
> - mcu_gpio_intr: interrupt-controller@4210000 {
> - compatible = "ti,sci-intr";
> - reg = <0x00 0x04210000 0x00 0x200>;
> - ti,intr-trigger-type = <1>;
> - interrupt-controller;
> - interrupt-parent = <&gic500>;
> - #interrupt-cells = <1>;
> - ti,sci = <&dmsc>;
> - ti,sci-dev-id = <5>;
> - ti,interrupt-ranges = <0 104 4>;
> - };
> -
> - mcu_gpio0: gpio@4201000 {
> - compatible = "ti,am64-gpio", "ti,keystone-gpio";
> - reg = <0x00 0x4201000 0x00 0x100>;
> - gpio-controller;
> - #gpio-cells = <2>;
> - interrupt-parent = <&mcu_gpio_intr>;
> - interrupts = <30>, <31>;
> - interrupt-controller;
> - #interrupt-cells = <2>;
> - ti,ngpio = <24>;
> - ti,davinci-gpio-unbanked = <0>;
> - power-domains = <&k3_pds 79 TI_SCI_PD_EXCLUSIVE>;
> - clocks = <&k3_clks 79 0>;
> - clock-names = "gpio";
> - };
> -
> - mcu_rti0: watchdog@4880000 {
> - compatible = "ti,j7-rti-wdt";
> - reg = <0x00 0x04880000 0x00 0x100>;
> - clocks = <&k3_clks 131 0>;
> - power-domains = <&k3_pds 131 TI_SCI_PD_EXCLUSIVE>;
> - assigned-clocks = <&k3_clks 131 0>;
> - assigned-clock-parents = <&k3_clks 131 2>;
> - /* Tightly coupled to M4F */
> - status = "reserved";
> - };
> -
> - mcu_mcan0: can@4e08000 {
> - compatible = "bosch,m_can";
> - reg = <0x00 0x4e08000 0x00 0x200>,
> - <0x00 0x4e00000 0x00 0x8000>;
> - reg-names = "m_can", "message_ram";
> - power-domains = <&k3_pds 188 TI_SCI_PD_EXCLUSIVE>;
> - clocks = <&k3_clks 188 6>, <&k3_clks 188 1>;
> - clock-names = "hclk", "cclk";
> - bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
> - status = "disabled";
> - };
> -
> - mcu_mcan1: can@4e18000 {
> - compatible = "bosch,m_can";
> - reg = <0x00 0x4e18000 0x00 0x200>,
> - <0x00 0x4e10000 0x00 0x8000>;
> - reg-names = "m_can", "message_ram";
> - power-domains = <&k3_pds 189 TI_SCI_PD_EXCLUSIVE>;
> - clocks = <&k3_clks 189 6>, <&k3_clks 189 1>;
> - clock-names = "hclk", "cclk";
> - bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
> - status = "disabled";
> - };
> -};
> diff --git a/arch/arm/dts/k3-am62-thermal.dtsi b/arch/arm/dts/k3-am62-thermal.dtsi
> deleted file mode 100644
> index 12ba833002a1..000000000000
> --- a/arch/arm/dts/k3-am62-thermal.dtsi
> +++ /dev/null
> @@ -1,36 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only OR MIT
> -/*
> - * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/
> - */
> -
> -#include <dt-bindings/thermal/thermal.h>
> -
> -thermal_zones: thermal-zones {
> - main0_thermal: main0-thermal {
> - polling-delay-passive = <250>; /* milliSeconds */
> - polling-delay = <500>; /* milliSeconds */
> - thermal-sensors = <&wkup_vtm0 0>;
> -
> - trips {
> - main0_crit: main0-crit {
> - temperature = <105000>; /* milliCelsius */
> - hysteresis = <2000>; /* milliCelsius */
> - type = "critical";
> - };
> - };
> - };
> -
> - main1_thermal: main1-thermal {
> - polling-delay-passive = <250>; /* milliSeconds */
> - polling-delay = <500>; /* milliSeconds */
> - thermal-sensors = <&wkup_vtm0 1>;
> -
> - trips {
> - main1_crit: main1-crit {
> - temperature = <105000>; /* milliCelsius */
> - hysteresis = <2000>; /* milliCelsius */
> - type = "critical";
> - };
> - };
> - };
> -};
> diff --git a/arch/arm/dts/k3-am62-wakeup.dtsi b/arch/arm/dts/k3-am62-wakeup.dtsi
> deleted file mode 100644
> index 23ce1bfda8d6..000000000000
> --- a/arch/arm/dts/k3-am62-wakeup.dtsi
> +++ /dev/null
> @@ -1,96 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only OR MIT
> -/*
> - * Device Tree Source for AM625 SoC Family Wakeup Domain peripherals
> - *
> - * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/
> - */
> -
> -#include <dt-bindings/bus/ti-sysc.h>
> -
> -&cbass_wakeup {
> - wkup_conf: syscon@43000000 {
> - bootph-all;
> - compatible = "syscon", "simple-mfd";
> - reg = <0x00 0x43000000 0x00 0x20000>;
> - #address-cells = <1>;
> - #size-cells = <1>;
> - ranges = <0x0 0x00 0x43000000 0x20000>;
> -
> - chipid: chipid@14 {
> - bootph-all;
> - compatible = "ti,am654-chipid";
> - reg = <0x14 0x4>;
> - };
> - };
> -
> - target-module@2b300050 {
> - compatible = "ti,sysc-omap2", "ti,sysc";
> - reg = <0x00 0x2b300050 0x00 0x4>,
> - <0x00 0x2b300054 0x00 0x4>,
> - <0x00 0x2b300058 0x00 0x4>;
> - reg-names = "rev", "sysc", "syss";
> - ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
> - SYSC_OMAP2_SOFTRESET |
> - SYSC_OMAP2_AUTOIDLE)>;
> - ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> - <SYSC_IDLE_NO>,
> - <SYSC_IDLE_SMART>,
> - <SYSC_IDLE_SMART_WKUP>;
> - ti,syss-mask = <1>;
> - ti,no-reset-on-init;
> - power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
> - clocks = <&k3_clks 114 0>;
> - clock-names = "fck";
> - #address-cells = <1>;
> - #size-cells = <1>;
> - ranges = <0x0 0x00 0x2b300000 0x100000>;
> -
> - wkup_uart0: serial@0 {
> - compatible = "ti,am64-uart", "ti,am654-uart";
> - reg = <0x0 0x100>;
> - interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
> - status = "disabled";
> - };
> - };
> -
> - wkup_i2c0: i2c@2b200000 {
> - compatible = "ti,am64-i2c", "ti,omap4-i2c";
> - reg = <0x00 0x2b200000 0x00 0x100>;
> - interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>;
> - clocks = <&k3_clks 107 4>;
> - clock-names = "fck";
> - status = "disabled";
> - };
> -
> - wkup_rtc0: rtc@2b1f0000 {
> - compatible = "ti,am62-rtc";
> - reg = <0x00 0x2b1f0000 0x00 0x100>;
> - interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&k3_clks 117 6> , <&k3_clks 117 0>;
> - clock-names = "vbus", "osc32k";
> - power-domains = <&k3_pds 117 TI_SCI_PD_EXCLUSIVE>;
> - wakeup-source;
> - };
> -
> - wkup_rti0: watchdog@2b000000 {
> - compatible = "ti,j7-rti-wdt";
> - reg = <0x00 0x2b000000 0x00 0x100>;
> - clocks = <&k3_clks 132 0>;
> - power-domains = <&k3_pds 132 TI_SCI_PD_EXCLUSIVE>;
> - assigned-clocks = <&k3_clks 132 0>;
> - assigned-clock-parents = <&k3_clks 132 2>;
> - /* Used by DM firmware */
> - status = "reserved";
> - };
> -
> - wkup_vtm0: temperature-sensor@b00000 {
> - compatible = "ti,j7200-vtm";
> - reg = <0x00 0xb00000 0x00 0x400>,
> - <0x00 0xb01000 0x00 0x400>;
> - power-domains = <&k3_pds 95 TI_SCI_PD_EXCLUSIVE>;
> - #thermal-sensor-cells = <1>;
> - };
> -};
> diff --git a/arch/arm/dts/k3-am62.dtsi b/arch/arm/dts/k3-am62.dtsi
> deleted file mode 100644
> index f0781f2bea29..000000000000
> --- a/arch/arm/dts/k3-am62.dtsi
> +++ /dev/null
> @@ -1,122 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only OR MIT
> -/*
> - * Device Tree Source for AM62 SoC Family
> - *
> - * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/
> - */
> -
> -#include <dt-bindings/gpio/gpio.h>
> -#include <dt-bindings/interrupt-controller/irq.h>
> -#include <dt-bindings/interrupt-controller/arm-gic.h>
> -#include <dt-bindings/soc/ti,sci_pm_domain.h>
> -
> -#include "k3-pinctrl.h"
> -
> -/ {
> - model = "Texas Instruments K3 AM625 SoC";
> - compatible = "ti,am625";
> - interrupt-parent = <&gic500>;
> - #address-cells = <2>;
> - #size-cells = <2>;
> -
> - chosen { };
> -
> - firmware {
> - optee {
> - compatible = "linaro,optee-tz";
> - method = "smc";
> - };
> -
> - psci: psci {
> - compatible = "arm,psci-1.0";
> - method = "smc";
> - };
> - };
> -
> - a53_timer0: timer-cl0-cpu0 {
> - compatible = "arm,armv8-timer";
> - interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */
> - <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */
> - <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */
> - <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */
> - };
> -
> - pmu: pmu {
> - compatible = "arm,cortex-a53-pmu";
> - interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
> - };
> -
> - cbass_main: bus@f0000 {
> - bootph-all;
> - compatible = "simple-bus";
> - #address-cells = <2>;
> - #size-cells = <2>;
> -
> - ranges = <0x00 0x000f0000 0x00 0x000f0000 0x00 0x00030000>, /* Main MMRs */
> - <0x00 0x00420000 0x00 0x00420000 0x00 0x00001000>, /* ESM0 */
> - <0x00 0x00600000 0x00 0x00600000 0x00 0x00001100>, /* GPIO */
> - <0x00 0x00703000 0x00 0x00703000 0x00 0x00000200>, /* USB0 debug trace */
> - <0x00 0x0070c000 0x00 0x0070c000 0x00 0x00000200>, /* USB1 debug trace */
> - <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* Timesync router */
> - <0x00 0x01000000 0x00 0x01000000 0x00 0x01b28400>, /* First peripheral window */
> - <0x00 0x08000000 0x00 0x08000000 0x00 0x00200000>, /* Main CPSW */
> - <0x00 0x0e000000 0x00 0x0e000000 0x00 0x01d20000>, /* Second peripheral window */
> - <0x00 0x0fd00000 0x00 0x0fd00000 0x00 0x00020000>, /* GPU */
> - <0x00 0x20000000 0x00 0x20000000 0x00 0x0a008000>, /* Third peripheral window */
> - <0x00 0x30040000 0x00 0x30040000 0x00 0x00080000>, /* PRUSS-M */
> - <0x00 0x30101000 0x00 0x30101000 0x00 0x00010100>, /* CSI window */
> - <0x00 0x30200000 0x00 0x30200000 0x00 0x00010000>, /* DSS */
> - <0x00 0x31000000 0x00 0x31000000 0x00 0x00050000>, /* USB0 DWC3 Core window */
> - <0x00 0x31100000 0x00 0x31100000 0x00 0x00050000>, /* USB1 DWC3 Core window */
> - <0x00 0x40900000 0x00 0x40900000 0x00 0x00030000>, /* SA3UL */
> - <0x00 0x43600000 0x00 0x43600000 0x00 0x00010000>, /* SA3 sproxy data */
> - <0x00 0x44043000 0x00 0x44043000 0x00 0x00000fe0>, /* TI SCI DEBUG */
> - <0x00 0x44860000 0x00 0x44860000 0x00 0x00040000>, /* SA3 sproxy config */
> - <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>, /* DMSS */
> - <0x00 0x60000000 0x00 0x60000000 0x00 0x08000000>, /* FSS0 DAT1 */
> - <0x00 0x70000000 0x00 0x70000000 0x00 0x00010000>, /* OCSRAM */
> - <0x01 0x00000000 0x01 0x00000000 0x00 0x00310000>, /* A53 PERIPHBASE */
> - <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS0 DAT3 */
> -
> - /* MCU Domain Range */
> - <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>,
> -
> - /* Wakeup Domain Range */
> - <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00002400>, /* VTM */
> - <0x00 0x2b000000 0x00 0x2b000000 0x00 0x00300400>,
> - <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>;
> -
> - cbass_mcu: bus@4000000 {
> - bootph-all;
> - compatible = "simple-bus";
> - #address-cells = <2>;
> - #size-cells = <2>;
> - ranges = <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>; /* Peripheral window */
> - };
> -
> - cbass_wakeup: bus@b00000 {
> - bootph-all;
> - compatible = "simple-bus";
> - #address-cells = <2>;
> - #size-cells = <2>;
> - ranges = <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00002400>, /* VTM */
> - <0x00 0x2b000000 0x00 0x2b000000 0x00 0x00300400>, /* Peripheral Window */
> - <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>;
> - };
> - };
> -
> - dss_vp1_clk: clock-divider-oldi {
> - compatible = "fixed-factor-clock";
> - clocks = <&k3_clks 186 0>;
> - #clock-cells = <0>;
> - clock-div = <7>;
> - clock-mult = <1>;
> - };
> -
> - #include "k3-am62-thermal.dtsi"
> -};
> -
> -/* Now include the peripherals for each bus segments */
> -#include "k3-am62-main.dtsi"
> -#include "k3-am62-mcu.dtsi"
> -#include "k3-am62-wakeup.dtsi"
> diff --git a/arch/arm/dts/k3-am625-sk-binman.dtsi b/arch/arm/dts/k3-am625-sk-binman.dtsi
> index dfd38d64f638..db3a3e91b08f 100644
> --- a/arch/arm/dts/k3-am625-sk-binman.dtsi
> +++ b/arch/arm/dts/k3-am625-sk-binman.dtsi
> @@ -141,7 +141,7 @@
>
> #ifdef CONFIG_TARGET_AM625_A53_EVM
>
> -#define SPL_AM625_SK_DTB "spl/dts/k3-am625-sk.dtb"
> +#define SPL_AM625_SK_DTB "spl/dts/ti/k3-am625-sk.dtb"
> #define AM625_SK_DTB "u-boot.dtb"
>
> &binman {
> diff --git a/arch/arm/dts/k3-am625-sk.dts b/arch/arm/dts/k3-am625-sk.dts
> deleted file mode 100644
> index ae81ebb39d02..000000000000
> --- a/arch/arm/dts/k3-am625-sk.dts
> +++ /dev/null
> @@ -1,299 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only OR MIT
> -/*
> - * AM625 SK: https://www.ti.com/lit/zip/sprr448
> - *
> - * Copyright (C) 2021-2024 Texas Instruments Incorporated - https://www.ti.com/
> - */
> -
> -/dts-v1/;
> -
> -#include "k3-am62x-sk-common.dtsi"
> -
> -/ {
> - compatible = "ti,am625-sk", "ti,am625";
> - model = "Texas Instruments AM625 SK";
> -
> - opp-table {
> - /* Add 1.4GHz OPP for am625-sk board. Requires VDD_CORE to be at 0.85V */
> - opp-1400000000 {
> - opp-hz = /bits/ 64 <1400000000>;
> - opp-supported-hw = <0x01 0x0004>;
> - clock-latency-ns = <6000000>;
> - };
> - };
> -
> - memory@80000000 {
> - device_type = "memory";
> - /* 2G RAM */
> - reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
> -
> - };
> -
> - vmain_pd: regulator-0 {
> - /* TPS65988 PD CONTROLLER OUTPUT */
> - bootph-all;
> - compatible = "regulator-fixed";
> - regulator-name = "vmain_pd";
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - regulator-always-on;
> - regulator-boot-on;
> - };
> -
> - vcc_5v0: regulator-1 {
> - /* Output of LM34936 */
> - bootph-all;
> - compatible = "regulator-fixed";
> - regulator-name = "vcc_5v0";
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - vin-supply = <&vmain_pd>;
> - regulator-always-on;
> - regulator-boot-on;
> - };
> -
> - vcc_3v3_sys: regulator-2 {
> - /* output of LM61460-Q1 */
> - bootph-all;
> - compatible = "regulator-fixed";
> - regulator-name = "vcc_3v3_sys";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - vin-supply = <&vmain_pd>;
> - regulator-always-on;
> - regulator-boot-on;
> - };
> -
> - vdd_mmc1: regulator-3 {
> - /* TPS22918DBVR */
> - bootph-all;
> - compatible = "regulator-fixed";
> - regulator-name = "vdd_mmc1";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-boot-on;
> - enable-active-high;
> - vin-supply = <&vcc_3v3_sys>;
> - gpio = <&exp1 3 GPIO_ACTIVE_HIGH>;
> - };
> -
> - vdd_sd_dv: regulator-4 {
> - /* Output of TLV71033 */
> - bootph-all;
> - compatible = "regulator-gpio";
> - regulator-name = "tlv71033";
> - pinctrl-names = "default";
> - pinctrl-0 = <&vdd_sd_dv_pins_default>;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-boot-on;
> - vin-supply = <&vcc_5v0>;
> - gpios = <&main_gpio0 31 GPIO_ACTIVE_HIGH>;
> - states = <1800000 0x0>,
> - <3300000 0x1>;
> - };
> -
> - vcc_1v8: regulator-5 {
> - /* output of TPS6282518DMQ */
> - compatible = "regulator-fixed";
> - regulator-name = "vcc_1v8";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - vin-supply = <&vcc_3v3_sys>;
> - regulator-always-on;
> - regulator-boot-on;
> - };
> -};
> -
> -&main_pmx0 {
> - main_rgmii2_pins_default: main-rgmii2-default-pins {
> - bootph-all;
> - pinctrl-single,pins = <
> - AM62X_IOPAD(0x184, PIN_INPUT, 0) /* (AE23) RGMII2_RD0 */
> - AM62X_IOPAD(0x188, PIN_INPUT, 0) /* (AB20) RGMII2_RD1 */
> - AM62X_IOPAD(0x18c, PIN_INPUT, 0) /* (AC21) RGMII2_RD2 */
> - AM62X_IOPAD(0x190, PIN_INPUT, 0) /* (AE22) RGMII2_RD3 */
> - AM62X_IOPAD(0x180, PIN_INPUT, 0) /* (AD23) RGMII2_RXC */
> - AM62X_IOPAD(0x17c, PIN_INPUT, 0) /* (AD22) RGMII2_RX_CTL */
> - AM62X_IOPAD(0x16c, PIN_OUTPUT, 0) /* (Y18) RGMII2_TD0 */
> - AM62X_IOPAD(0x170, PIN_OUTPUT, 0) /* (AA18) RGMII2_TD1 */
> - AM62X_IOPAD(0x174, PIN_OUTPUT, 0) /* (AD21) RGMII2_TD2 */
> - AM62X_IOPAD(0x178, PIN_OUTPUT, 0) /* (AC20) RGMII2_TD3 */
> - AM62X_IOPAD(0x168, PIN_OUTPUT, 0) /* (AE21) RGMII2_TXC */
> - AM62X_IOPAD(0x164, PIN_OUTPUT, 0) /* (AA19) RGMII2_TX_CTL */
> - >;
> - };
> -
> - ospi0_pins_default: ospi0-default-pins {
> - bootph-all;
> - pinctrl-single,pins = <
> - AM62X_IOPAD(0x000, PIN_OUTPUT, 0) /* (H24) OSPI0_CLK */
> - AM62X_IOPAD(0x02c, PIN_OUTPUT, 0) /* (F23) OSPI0_CSn0 */
> - AM62X_IOPAD(0x00c, PIN_INPUT, 0) /* (E25) OSPI0_D0 */
> - AM62X_IOPAD(0x010, PIN_INPUT, 0) /* (G24) OSPI0_D1 */
> - AM62X_IOPAD(0x014, PIN_INPUT, 0) /* (F25) OSPI0_D2 */
> - AM62X_IOPAD(0x018, PIN_INPUT, 0) /* (F24) OSPI0_D3 */
> - AM62X_IOPAD(0x01c, PIN_INPUT, 0) /* (J23) OSPI0_D4 */
> - AM62X_IOPAD(0x020, PIN_INPUT, 0) /* (J25) OSPI0_D5 */
> - AM62X_IOPAD(0x024, PIN_INPUT, 0) /* (H25) OSPI0_D6 */
> - AM62X_IOPAD(0x028, PIN_INPUT, 0) /* (J22) OSPI0_D7 */
> - AM62X_IOPAD(0x008, PIN_INPUT, 0) /* (J24) OSPI0_DQS */
> - >;
> - };
> -
> - vdd_sd_dv_pins_default: vdd-sd-dv-default-pins {
> - bootph-all;
> - pinctrl-single,pins = <
> - AM62X_IOPAD(0x07c, PIN_OUTPUT, 7) /* (P25) GPMC0_CLK.GPIO0_31 */
> - >;
> - };
> -
> - main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-default-pins {
> - bootph-all;
> - pinctrl-single,pins = <
> - AM62X_IOPAD(0x01d4, PIN_INPUT, 7) /* (B15) UART0_RTSn.GPIO1_23 */
> - >;
> - };
> -};
> -
> -&main_gpio0 {
> - bootph-all;
> -};
> -
> -&main_gpio1 {
> - bootph-all;
> -};
> -
> -&main_i2c1 {
> - bootph-all;
> - exp1: gpio@22 {
> - bootph-all;
> - compatible = "ti,tca6424";
> - reg = <0x22>;
> - gpio-controller;
> - #gpio-cells = <2>;
> - gpio-line-names = "GPIO_CPSW2_RST", "GPIO_CPSW1_RST",
> - "PRU_DETECT", "MMC1_SD_EN",
> - "VPP_LDO_EN", "EXP_PS_3V3_En",
> - "EXP_PS_5V0_En", "EXP_HAT_DETECT",
> - "GPIO_AUD_RSTn", "GPIO_eMMC_RSTn",
> - "UART1_FET_BUF_EN", "WL_LT_EN",
> - "GPIO_HDMI_RSTn", "CSI_GPIO1",
> - "CSI_GPIO2", "PRU_3V3_EN",
> - "HDMI_INTn", "PD_I2C_IRQ",
> - "MCASP1_FET_EN", "MCASP1_BUF_BT_EN",
> - "MCASP1_FET_SEL", "UART1_FET_SEL",
> - "TSINT#", "IO_EXP_TEST_LED";
> -
> - interrupt-parent = <&main_gpio1>;
> - interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
> - interrupt-controller;
> - #interrupt-cells = <2>;
> -
> - pinctrl-names = "default";
> - pinctrl-0 = <&main_gpio1_ioexp_intr_pins_default>;
> - };
> -};
> -
> -&sdhci1 {
> - vmmc-supply = <&vdd_mmc1>;
> - vqmmc-supply = <&vdd_sd_dv>;
> -};
> -
> -&cpsw3g {
> - pinctrl-names = "default";
> - pinctrl-0 = <&main_rgmii1_pins_default>, <&main_rgmii2_pins_default>;
> -};
> -
> -&cpsw_port2 {
> - phy-mode = "rgmii-rxid";
> - phy-handle = <&cpsw3g_phy1>;
> -};
> -
> -&cpsw3g_mdio {
> - cpsw3g_phy1: ethernet-phy@1 {
> - reg = <1>;
> - ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
> - ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
> - ti,min-output-impedance;
> - };
> -};
> -
> -&mailbox0_cluster0 {
> - mbox_m4_0: mbox-m4-0 {
> - ti,mbox-rx = <0 0 0>;
> - ti,mbox-tx = <1 0 0>;
> - };
> -};
> -
> -&fss {
> - bootph-all;
> -};
> -
> -&ospi0 {
> - bootph-all;
> - status = "okay";
> - pinctrl-names = "default";
> - pinctrl-0 = <&ospi0_pins_default>;
> -
> - flash@0 {
> - bootph-all;
> - compatible = "jedec,spi-nor";
> - reg = <0x0>;
> - spi-tx-bus-width = <8>;
> - spi-rx-bus-width = <8>;
> - spi-max-frequency = <25000000>;
> - cdns,tshsl-ns = <60>;
> - cdns,tsd2d-ns = <60>;
> - cdns,tchsh-ns = <60>;
> - cdns,tslch-ns = <60>;
> - cdns,read-delay = <4>;
> -
> - partitions {
> - bootph-all;
> - compatible = "fixed-partitions";
> - #address-cells = <1>;
> - #size-cells = <1>;
> -
> - partition@0 {
> - label = "ospi.tiboot3";
> - reg = <0x0 0x80000>;
> - };
> -
> - partition@80000 {
> - label = "ospi.tispl";
> - reg = <0x80000 0x200000>;
> - };
> -
> - partition@280000 {
> - label = "ospi.u-boot";
> - reg = <0x280000 0x400000>;
> - };
> -
> - partition@680000 {
> - label = "ospi.env";
> - reg = <0x680000 0x40000>;
> - };
> -
> - partition@6c0000 {
> - label = "ospi.env.backup";
> - reg = <0x6c0000 0x40000>;
> - };
> -
> - partition@800000 {
> - label = "ospi.rootfs";
> - reg = <0x800000 0x37c0000>;
> - };
> -
> - partition@3fc0000 {
> - bootph-pre-ram;
> - label = "ospi.phypattern";
> - reg = <0x3fc0000 0x40000>;
> - };
> - };
> - };
> -};
> -
> -&tlv320aic3106 {
> - DVDD-supply = <&vcc_1v8>;
> -};
> diff --git a/arch/arm/dts/k3-am625.dtsi b/arch/arm/dts/k3-am625.dtsi
> deleted file mode 100644
> index 4014add6320d..000000000000
> --- a/arch/arm/dts/k3-am625.dtsi
> +++ /dev/null
> @@ -1,155 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only OR MIT
> -/*
> - * Device Tree Source for AM625 SoC family in Quad core configuration
> - *
> - * TRM: https://www.ti.com/lit/pdf/spruiv7
> - *
> - * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/
> - */
> -
> -/dts-v1/;
> -
> -#include "k3-am62.dtsi"
> -
> -/ {
> - cpus {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - cpu-map {
> - cluster0: cluster0 {
> - core0 {
> - cpu = <&cpu0>;
> - };
> -
> - core1 {
> - cpu = <&cpu1>;
> - };
> -
> - core2 {
> - cpu = <&cpu2>;
> - };
> -
> - core3 {
> - cpu = <&cpu3>;
> - };
> - };
> - };
> -
> - cpu0: cpu@0 {
> - compatible = "arm,cortex-a53";
> - reg = <0x000>;
> - device_type = "cpu";
> - enable-method = "psci";
> - i-cache-size = <0x8000>;
> - i-cache-line-size = <64>;
> - i-cache-sets = <256>;
> - d-cache-size = <0x8000>;
> - d-cache-line-size = <64>;
> - d-cache-sets = <128>;
> - next-level-cache = <&L2_0>;
> - operating-points-v2 = <&a53_opp_table>;
> - clocks = <&k3_clks 135 0>;
> - };
> -
> - cpu1: cpu@1 {
> - compatible = "arm,cortex-a53";
> - reg = <0x001>;
> - device_type = "cpu";
> - enable-method = "psci";
> - i-cache-size = <0x8000>;
> - i-cache-line-size = <64>;
> - i-cache-sets = <256>;
> - d-cache-size = <0x8000>;
> - d-cache-line-size = <64>;
> - d-cache-sets = <128>;
> - next-level-cache = <&L2_0>;
> - operating-points-v2 = <&a53_opp_table>;
> - clocks = <&k3_clks 136 0>;
> - };
> -
> - cpu2: cpu@2 {
> - compatible = "arm,cortex-a53";
> - reg = <0x002>;
> - device_type = "cpu";
> - enable-method = "psci";
> - i-cache-size = <0x8000>;
> - i-cache-line-size = <64>;
> - i-cache-sets = <256>;
> - d-cache-size = <0x8000>;
> - d-cache-line-size = <64>;
> - d-cache-sets = <128>;
> - next-level-cache = <&L2_0>;
> - operating-points-v2 = <&a53_opp_table>;
> - clocks = <&k3_clks 137 0>;
> - };
> -
> - cpu3: cpu@3 {
> - compatible = "arm,cortex-a53";
> - reg = <0x003>;
> - device_type = "cpu";
> - enable-method = "psci";
> - i-cache-size = <0x8000>;
> - i-cache-line-size = <64>;
> - i-cache-sets = <256>;
> - d-cache-size = <0x8000>;
> - d-cache-line-size = <64>;
> - d-cache-sets = <128>;
> - next-level-cache = <&L2_0>;
> - operating-points-v2 = <&a53_opp_table>;
> - clocks = <&k3_clks 138 0>;
> - };
> - };
> -
> - a53_opp_table: opp-table {
> - compatible = "operating-points-v2-ti-cpu";
> - opp-shared;
> - syscon = <&wkup_conf>;
> -
> - opp-200000000 {
> - opp-hz = /bits/ 64 <200000000>;
> - opp-supported-hw = <0x01 0x0007>;
> - clock-latency-ns = <6000000>;
> - };
> -
> - opp-400000000 {
> - opp-hz = /bits/ 64 <400000000>;
> - opp-supported-hw = <0x01 0x0007>;
> - clock-latency-ns = <6000000>;
> - };
> -
> - opp-600000000 {
> - opp-hz = /bits/ 64 <600000000>;
> - opp-supported-hw = <0x01 0x0007>;
> - clock-latency-ns = <6000000>;
> - };
> -
> - opp-800000000 {
> - opp-hz = /bits/ 64 <800000000>;
> - opp-supported-hw = <0x01 0x0007>;
> - clock-latency-ns = <6000000>;
> - };
> -
> - opp-1000000000 {
> - opp-hz = /bits/ 64 <1000000000>;
> - opp-supported-hw = <0x01 0x0006>;
> - clock-latency-ns = <6000000>;
> - };
> -
> - opp-1250000000 {
> - opp-hz = /bits/ 64 <1250000000>;
> - opp-supported-hw = <0x01 0x0004>;
> - clock-latency-ns = <6000000>;
> - opp-suspend;
> - };
> - };
> -
> - L2_0: l2-cache0 {
> - compatible = "cache";
> - cache-unified;
> - cache-level = <2>;
> - cache-size = <0x80000>;
> - cache-line-size = <64>;
> - cache-sets = <512>;
> - };
> -};
> diff --git a/arch/arm/dts/k3-am62x-sk-common.dtsi b/arch/arm/dts/k3-am62x-sk-common.dtsi
> deleted file mode 100644
> index 3c45782ab2b7..000000000000
> --- a/arch/arm/dts/k3-am62x-sk-common.dtsi
> +++ /dev/null
> @@ -1,535 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only OR MIT
> -/*
> - * Common dtsi for AM62x SK and derivatives
> - *
> - * Copyright (C) 2021-2024 Texas Instruments Incorporated - https://www.ti.com/
> - */
> -
> -#include <dt-bindings/leds/common.h>
> -#include <dt-bindings/gpio/gpio.h>
> -#include <dt-bindings/net/ti-dp83867.h>
> -#include "k3-am625.dtsi"
> -
> -/ {
> - aliases {
> - serial2 = &main_uart0;
> - mmc0 = &sdhci0;
> - mmc1 = &sdhci1;
> - mmc2 = &sdhci2;
> - spi0 = &ospi0;
> - ethernet0 = &cpsw_port1;
> - ethernet1 = &cpsw_port2;
> - usb0 = &usb0;
> - usb1 = &usb1;
> - };
> -
> - chosen {
> - stdout-path = "serial2:115200n8";
> - };
> -
> - memory@80000000 {
> - bootph-pre-ram;
> - device_type = "memory";
> - /* 2G RAM */
> - reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
> - };
> -
> - reserved-memory {
> - #address-cells = <2>;
> - #size-cells = <2>;
> - ranges;
> -
> - ramoops@9ca00000 {
> - compatible = "ramoops";
> - reg = <0x00 0x9ca00000 0x00 0x00100000>;
> - record-size = <0x8000>;
> - console-size = <0x8000>;
> - ftrace-size = <0x00>;
> - pmsg-size = <0x8000>;
> - };
> -
> - secure_tfa_ddr: tfa@9e780000 {
> - reg = <0x00 0x9e780000 0x00 0x80000>;
> - alignment = <0x1000>;
> - no-map;
> - };
> -
> - secure_ddr: optee@9e800000 {
> - reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
> - alignment = <0x1000>;
> - no-map;
> - };
> -
> - wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9db00000 {
> - compatible = "shared-dma-pool";
> - reg = <0x00 0x9db00000 0x00 0xc00000>;
> - no-map;
> - };
> - };
> -
> - leds {
> - compatible = "gpio-leds";
> - pinctrl-names = "default";
> - pinctrl-0 = <&usr_led_pins_default>;
> -
> - led-0 {
> - label = "am62-sk:green:heartbeat";
> - gpios = <&main_gpio1 49 GPIO_ACTIVE_HIGH>;
> - linux,default-trigger = "heartbeat";
> - function = LED_FUNCTION_HEARTBEAT;
> - default-state = "off";
> - };
> - };
> -
> - tlv320_mclk: clk-0 {
> - #clock-cells = <0>;
> - compatible = "fixed-clock";
> - clock-frequency = <12288000>;
> - };
> -
> - codec_audio: sound {
> - compatible = "simple-audio-card";
> - simple-audio-card,name = "AM62x-SKEVM";
> - simple-audio-card,widgets =
> - "Headphone", "Headphone Jack",
> - "Line", "Line In",
> - "Microphone", "Microphone Jack";
> - simple-audio-card,routing =
> - "Headphone Jack", "HPLOUT",
> - "Headphone Jack", "HPROUT",
> - "LINE1L", "Line In",
> - "LINE1R", "Line In",
> - "MIC3R", "Microphone Jack",
> - "Microphone Jack", "Mic Bias";
> - simple-audio-card,format = "dsp_b";
> - simple-audio-card,bitclock-master = <&sound_master>;
> - simple-audio-card,frame-master = <&sound_master>;
> - simple-audio-card,bitclock-inversion;
> -
> - simple-audio-card,cpu {
> - sound-dai = <&mcasp1>;
> - };
> -
> - sound_master: simple-audio-card,codec {
> - sound-dai = <&tlv320aic3106>;
> - clocks = <&tlv320_mclk>;
> - };
> - };
> -
> - hdmi0: connector-hdmi {
> - compatible = "hdmi-connector";
> - label = "hdmi";
> - type = "a";
> - port {
> - hdmi_connector_in: endpoint {
> - remote-endpoint = <&sii9022_out>;
> - };
> - };
> - };
> -};
> -
> -&main_pmx0 {
> - /* First pad number is ALW package and second is AMC package */
> - main_uart0_pins_default: main-uart0-default-pins {
> - bootph-all;
> - pinctrl-single,pins = <
> - AM62X_IOPAD(0x1c8, PIN_INPUT, 0) /* (D14/A13) UART0_RXD */
> - AM62X_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (E14/E11) UART0_TXD */
> - >;
> - };
> -
> - main_uart1_pins_default: main-uart1-default-pins {
> - bootph-pre-ram;
> - pinctrl-single,pins = <
> - AM62X_IOPAD(0x194, PIN_INPUT, 2) /* (B19/B18) MCASP0_AXR3.UART1_CTSn */
> - AM62X_IOPAD(0x198, PIN_OUTPUT, 2) /* (A19/B17) MCASP0_AXR2.UART1_RTSn */
> - AM62X_IOPAD(0x1ac, PIN_INPUT, 2) /* (E19/D15) MCASP0_AFSR.UART1_RXD */
> - AM62X_IOPAD(0x1b0, PIN_OUTPUT, 2) /* (A20/D16) MCASP0_ACLKR.UART1_TXD */
> - >;
> - };
> -
> - main_i2c0_pins_default: main-i2c0-default-pins {
> - pinctrl-single,pins = <
> - AM62X_IOPAD(0x1e0, PIN_INPUT_PULLUP, 0) /* (B16/E12) I2C0_SCL */
> - AM62X_IOPAD(0x1e4, PIN_INPUT_PULLUP, 0) /* (A16/D14) I2C0_SDA */
> - >;
> - };
> -
> - main_i2c1_pins_default: main-i2c1-default-pins {
> - pinctrl-single,pins = <
> - AM62X_IOPAD(0x1e8, PIN_INPUT_PULLUP, 0) /* (B17/A17) I2C1_SCL */
> - AM62X_IOPAD(0x1ec, PIN_INPUT_PULLUP, 0) /* (A17/A16) I2C1_SDA */
> - >;
> - };
> -
> - main_i2c2_pins_default: main-i2c2-default-pins {
> - pinctrl-single,pins = <
> - AM62X_IOPAD(0x0b0, PIN_INPUT_PULLUP, 1) /* (K22/H18) GPMC0_CSn2.I2C2_SCL */
> - AM62X_IOPAD(0x0b4, PIN_INPUT_PULLUP, 1) /* (K24/H19) GPMC0_CSn3.I2C2_SDA */
> - >;
> - };
> -
> - main_mmc0_pins_default: main-mmc0-default-pins {
> - bootph-all;
> - pinctrl-single,pins = <
> - AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (Y3/V3) MMC0_CMD */
> - AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (AB1/Y1) MMC0_CLK */
> - AM62X_IOPAD(0x214, PIN_INPUT, 0) /* (AA2/V2) MMC0_DAT0 */
> - AM62X_IOPAD(0x210, PIN_INPUT, 0) /* (AA1/V1) MMC0_DAT1 */
> - AM62X_IOPAD(0x20c, PIN_INPUT, 0) /* (AA3/W2) MMC0_DAT2 */
> - AM62X_IOPAD(0x208, PIN_INPUT, 0) /* (Y4/W1) MMC0_DAT3 */
> - AM62X_IOPAD(0x204, PIN_INPUT, 0) /* (AB2/Y2) MMC0_DAT4 */
> - AM62X_IOPAD(0x200, PIN_INPUT, 0) /* (AC1/W3) MMC0_DAT5 */
> - AM62X_IOPAD(0x1fc, PIN_INPUT, 0) /* (AD2/W4) MMC0_DAT6 */
> - AM62X_IOPAD(0x1f8, PIN_INPUT, 0) /* (AC2/V4) MMC0_DAT7 */
> - >;
> - };
> -
> - main_mmc1_pins_default: main-mmc1-default-pins {
> - bootph-all;
> - pinctrl-single,pins = <
> - AM62X_IOPAD(0x23c, PIN_INPUT, 0) /* (A21/C18) MMC1_CMD */
> - AM62X_IOPAD(0x234, PIN_INPUT, 0) /* (B22/A20) MMC1_CLK */
> - AM62X_IOPAD(0x230, PIN_INPUT, 0) /* (A22/A19) MMC1_DAT0 */
> - AM62X_IOPAD(0x22c, PIN_INPUT, 0) /* (B21/B19) MMC1_DAT1 */
> - AM62X_IOPAD(0x228, PIN_INPUT, 0) /* (C21/B20) MMC1_DAT2 */
> - AM62X_IOPAD(0x224, PIN_INPUT, 0) /* (D22/C19) MMC1_DAT3 */
> - AM62X_IOPAD(0x240, PIN_INPUT, 0) /* (D17/C15) MMC1_SDCD */
> - >;
> - };
> -
> - usr_led_pins_default: usr-led-default-pins {
> - pinctrl-single,pins = <
> - AM62X_IOPAD(0x244, PIN_OUTPUT, 7) /* (C17/B15) MMC1_SDWP.GPIO1_49 */
> - >;
> - };
> -
> - main_mdio1_pins_default: main-mdio1-default-pins {
> - pinctrl-single,pins = <
> - AM62X_IOPAD(0x160, PIN_OUTPUT, 0) /* (AD24/V17) MDIO0_MDC */
> - AM62X_IOPAD(0x15c, PIN_INPUT, 0) /* (AB22/U16) MDIO0_MDIO */
> - >;
> - };
> -
> - main_rgmii1_pins_default: main-rgmii1-default-pins {
> - bootph-all;
> - pinctrl-single,pins = <
> - AM62X_IOPAD(0x14c, PIN_INPUT, 0) /* (AB17/W15) RGMII1_RD0 */
> - AM62X_IOPAD(0x150, PIN_INPUT, 0) /* (AC17/Y16) RGMII1_RD1 */
> - AM62X_IOPAD(0x154, PIN_INPUT, 0) /* (AB16/AA17) RGMII1_RD2 */
> - AM62X_IOPAD(0x158, PIN_INPUT, 0) /* (AA15/Y15) RGMII1_RD3 */
> - AM62X_IOPAD(0x148, PIN_INPUT, 0) /* (AD17/AA16) RGMII1_RXC */
> - AM62X_IOPAD(0x144, PIN_INPUT, 0) /* (AE17/W14) RGMII1_RX_CTL */
> - AM62X_IOPAD(0x134, PIN_OUTPUT, 0) /* (AE20/U14) RGMII1_TD0 */
> - AM62X_IOPAD(0x138, PIN_OUTPUT, 0) /* (AD20/AA19) RGMII1_TD1 */
> - AM62X_IOPAD(0x13c, PIN_OUTPUT, 0) /* (AE18/Y17) RGMII1_TD2 */
> - AM62X_IOPAD(0x140, PIN_OUTPUT, 0) /* (AD18/AA18) RGMII1_TD3 */
> - AM62X_IOPAD(0x130, PIN_OUTPUT, 0) /* (AE19/W16) RGMII1_TXC */
> - AM62X_IOPAD(0x12c, PIN_OUTPUT, 0) /* (AD19/V15) RGMII1_TX_CTL */
> - >;
> - };
> -
> - main_usb1_pins_default: main-usb1-default-pins {
> - pinctrl-single,pins = <
> - AM62X_IOPAD(0x0258, PIN_OUTPUT, 0) /* (F18/E16) USB1_DRVVBUS */
> - >;
> - };
> -
> - main_mcasp1_pins_default: main-mcasp1-default-pins {
> - pinctrl-single,pins = <
> - AM62X_IOPAD(0x090, PIN_INPUT, 2) /* (M24/K17) GPMC0_BE0N_CLE.MCASP1_ACLKX */
> - AM62X_IOPAD(0x098, PIN_INPUT, 2) /* (U23/P21) GPMC0_WAIT0.MCASP1_AFSX */
> - AM62X_IOPAD(0x08c, PIN_OUTPUT, 2) /* (L25/J17) GPMC0_WEN.MCASP1_AXR0 */
> - AM62X_IOPAD(0x084, PIN_INPUT, 2) /* (L23/K20) GPMC0_ADVN_ALE.MCASP1_AXR2 */
> - >;
> - };
> -
> - main_dss0_pins_default: main-dss0-default-pins {
> - pinctrl-single,pins = <
> - AM62X_IOPAD(0x100, PIN_OUTPUT, 0) /* (AC25) VOUT0_VSYNC */
> - AM62X_IOPAD(0x0f8, PIN_OUTPUT, 0) /* (AB24) VOUT0_HSYNC */
> - AM62X_IOPAD(0x104, PIN_OUTPUT, 0) /* (AC24) VOUT0_PCLK */
> - AM62X_IOPAD(0x0fc, PIN_OUTPUT, 0) /* (Y20) VOUT0_DE */
> - AM62X_IOPAD(0x0b8, PIN_OUTPUT, 0) /* (U22) VOUT0_DATA0 */
> - AM62X_IOPAD(0x0bc, PIN_OUTPUT, 0) /* (V24) VOUT0_DATA1 */
> - AM62X_IOPAD(0x0c0, PIN_OUTPUT, 0) /* (W25) VOUT0_DATA2 */
> - AM62X_IOPAD(0x0c4, PIN_OUTPUT, 0) /* (W24) VOUT0_DATA3 */
> - AM62X_IOPAD(0x0c8, PIN_OUTPUT, 0) /* (Y25) VOUT0_DATA4 */
> - AM62X_IOPAD(0x0cc, PIN_OUTPUT, 0) /* (Y24) VOUT0_DATA5 */
> - AM62X_IOPAD(0x0d0, PIN_OUTPUT, 0) /* (Y23) VOUT0_DATA6 */
> - AM62X_IOPAD(0x0d4, PIN_OUTPUT, 0) /* (AA25) VOUT0_DATA7 */
> - AM62X_IOPAD(0x0d8, PIN_OUTPUT, 0) /* (V21) VOUT0_DATA8 */
> - AM62X_IOPAD(0x0dc, PIN_OUTPUT, 0) /* (W21) VOUT0_DATA9 */
> - AM62X_IOPAD(0x0e0, PIN_OUTPUT, 0) /* (V20) VOUT0_DATA10 */
> - AM62X_IOPAD(0x0e4, PIN_OUTPUT, 0) /* (AA23) VOUT0_DATA11 */
> - AM62X_IOPAD(0x0e8, PIN_OUTPUT, 0) /* (AB25) VOUT0_DATA12 */
> - AM62X_IOPAD(0x0ec, PIN_OUTPUT, 0) /* (AA24) VOUT0_DATA13 */
> - AM62X_IOPAD(0x0f0, PIN_OUTPUT, 0) /* (Y22) VOUT0_DATA14 */
> - AM62X_IOPAD(0x0f4, PIN_OUTPUT, 0) /* (AA21) VOUT0_DATA15 */
> - AM62X_IOPAD(0x05c, PIN_OUTPUT, 1) /* (R24) GPMC0_AD8.VOUT0_DATA16 */
> - AM62X_IOPAD(0x060, PIN_OUTPUT, 1) /* (R25) GPMC0_AD9.VOUT0_DATA17 */
> - AM62X_IOPAD(0x064, PIN_OUTPUT, 1) /* (T25) GPMC0_AD10.VOUT0_DATA18 */
> - AM62X_IOPAD(0x068, PIN_OUTPUT, 1) /* (R21) GPMC0_AD11.VOUT0_DATA19 */
> - AM62X_IOPAD(0x06c, PIN_OUTPUT, 1) /* (T22) GPMC0_AD12.VOUT0_DATA20 */
> - AM62X_IOPAD(0x070, PIN_OUTPUT, 1) /* (T24) GPMC0_AD13.VOUT0_DATA21 */
> - AM62X_IOPAD(0x074, PIN_OUTPUT, 1) /* (U25) GPMC0_AD14.VOUT0_DATA22 */
> - AM62X_IOPAD(0x078, PIN_OUTPUT, 1) /* (U24) GPMC0_AD15.VOUT0_DATA23 */
> - >;
> - };
> -};
> -
> -&mcu_pmx0 {
> - wkup_uart0_pins_default: wkup-uart0-default-pins {
> - bootph-pre-ram;
> - pinctrl-single,pins = <
> - AM62X_MCU_IOPAD(0x02c, PIN_INPUT, 0) /* (C6/A7) WKUP_UART0_CTSn */
> - AM62X_MCU_IOPAD(0x030, PIN_OUTPUT, 0) /* (A4/B4) WKUP_UART0_RTSn */
> - AM62X_MCU_IOPAD(0x024, PIN_INPUT, 0) /* (B4/B5) WKUP_UART0_RXD */
> - AM62X_MCU_IOPAD(0x028, PIN_OUTPUT, 0) /* (C5/C6) WKUP_UART0_TXD */
> - >;
> - };
> -};
> -
> -&wkup_uart0 {
> - /* WKUP UART0 is used by DM firmware */
> - bootph-pre-ram;
> - status = "reserved";
> - pinctrl-names = "default";
> - pinctrl-0 = <&wkup_uart0_pins_default>;
> -};
> -
> -&main_uart0 {
> - bootph-all;
> - status = "okay";
> - pinctrl-names = "default";
> - pinctrl-0 = <&main_uart0_pins_default>;
> -};
> -
> -&main_uart1 {
> - /* Main UART1 is used by TIFS firmware */
> - bootph-pre-ram;
> - status = "reserved";
> - pinctrl-names = "default";
> - pinctrl-0 = <&main_uart1_pins_default>;
> -};
> -
> -&main_i2c0 {
> - status = "okay";
> - pinctrl-names = "default";
> - pinctrl-0 = <&main_i2c0_pins_default>;
> - clock-frequency = <400000>;
> -
> - eeprom@51 {
> - /* AT24C512C-MAHM-T or M24512-DFMC6TG */
> - compatible = "atmel,24c512";
> - reg = <0x51>;
> - };
> -
> - typec_pd0: tps6598x@3f {
> - compatible = "ti,tps6598x";
> - reg = <0x3f>;
> -
> - connector {
> - compatible = "usb-c-connector";
> - label = "USB-C";
> - self-powered;
> - data-role = "dual";
> - power-role = "sink";
> - ports {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - port@0 {
> - reg = <0>;
> - usb_con_hs: endpoint {
> - remote-endpoint = <&usb0_hs_ep>;
> - };
> - };
> - };
> - };
> - };
> -};
> -
> -&main_i2c1 {
> - status = "okay";
> - pinctrl-names = "default";
> - pinctrl-0 = <&main_i2c1_pins_default>;
> - clock-frequency = <100000>;
> -
> - tlv320aic3106: audio-codec@1b {
> - #sound-dai-cells = <0>;
> - compatible = "ti,tlv320aic3106";
> - reg = <0x1b>;
> - ai3x-micbias-vg = <1>; /* 2.0V */
> -
> - /* Regulators */
> - AVDD-supply = <&vcc_3v3_sys>;
> - IOVDD-supply = <&vcc_3v3_sys>;
> - DRVDD-supply = <&vcc_3v3_sys>;
> - };
> -
> - sii9022: bridge-hdmi@3b {
> - compatible = "sil,sii9022";
> - reg = <0x3b>;
> - interrupt-parent = <&exp1>;
> - interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
> - #sound-dai-cells = <0>;
> - sil,i2s-data-lanes = < 0 >;
> -
> - ports {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - port@0 {
> - reg = <0>;
> -
> - sii9022_in: endpoint {
> - remote-endpoint = <&dpi1_out>;
> - };
> - };
> -
> - port@1 {
> - reg = <1>;
> -
> - sii9022_out: endpoint {
> - remote-endpoint = <&hdmi_connector_in>;
> - };
> - };
> - };
> - };
> -};
> -
> -&main_i2c2 {
> - status = "okay";
> - pinctrl-names = "default";
> - pinctrl-0 = <&main_i2c2_pins_default>;
> - clock-frequency = <400000>;
> -};
> -
> -&sdhci0 {
> - bootph-all;
> - status = "okay";
> - pinctrl-names = "default";
> - pinctrl-0 = <&main_mmc0_pins_default>;
> - disable-wp;
> -};
> -
> -&sdhci1 {
> - /* SD/MMC */
> - bootph-all;
> - status = "okay";
> - pinctrl-names = "default";
> - pinctrl-0 = <&main_mmc1_pins_default>;
> - disable-wp;
> -};
> -
> -&cpsw3g {
> - bootph-all;
> - pinctrl-names = "default";
> - pinctrl-0 = <&main_rgmii1_pins_default>;
> -};
> -
> -&cpsw_port1 {
> - bootph-all;
> - phy-mode = "rgmii-rxid";
> - phy-handle = <&cpsw3g_phy0>;
> -};
> -
> -&cpsw3g_mdio {
> - bootph-all;
> - status = "okay";
> - pinctrl-names = "default";
> - pinctrl-0 = <&main_mdio1_pins_default>;
> -
> - cpsw3g_phy0: ethernet-phy@0 {
> - bootph-all;
> - reg = <0>;
> - ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
> - ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
> - ti,min-output-impedance;
> - };
> -};
> -
> -&mailbox0_cluster0 {
> - mbox_m4_0: mbox-m4-0 {
> - ti,mbox-rx = <0 0 0>;
> - ti,mbox-tx = <1 0 0>;
> - };
> -};
> -
> -&usbss0 {
> - bootph-all;
> - status = "okay";
> - ti,vbus-divider;
> -};
> -
> -&usbss1 {
> - status = "okay";
> - ti,vbus-divider;
> -};
> -
> -&usb0 {
> - bootph-all;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - usb-role-switch;
> -
> - port@0 {
> - reg = <0>;
> - usb0_hs_ep: endpoint {
> - remote-endpoint = <&usb_con_hs>;
> - };
> - };
> -};
> -
> -&usb1 {
> - dr_mode = "host";
> - pinctrl-names = "default";
> - pinctrl-0 = <&main_usb1_pins_default>;
> -};
> -
> -&mcasp1 {
> - status = "okay";
> - #sound-dai-cells = <0>;
> -
> - pinctrl-names = "default";
> - pinctrl-0 = <&main_mcasp1_pins_default>;
> -
> - op-mode = <0>; /* MCASP_IIS_MODE */
> - tdm-slots = <2>;
> -
> - serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
> - 1 0 2 0
> - 0 0 0 0
> - 0 0 0 0
> - 0 0 0 0
> - >;
> - tx-num-evt = <32>;
> - rx-num-evt = <32>;
> -};
> -
> -&dss {
> - status = "okay";
> - pinctrl-names = "default";
> - pinctrl-0 = <&main_dss0_pins_default>;
> -};
> -
> -&dss_ports {
> - /* VP2: DPI Output */
> - port@1 {
> - reg = <1>;
> -
> - dpi1_out: endpoint {
> - remote-endpoint = <&sii9022_in>;
> - };
> - };
> -};
> -
> -/* mcu_gpio0 and mcu_gpio_intr are reserved for mcu firmware usage */
> -&mcu_gpio0 {
> - status = "reserved";
> -};
> -
> -&mcu_gpio_intr {
> - status = "reserved";
> -};
> diff --git a/configs/am62x_evm_a53_defconfig b/configs/am62x_evm_a53_defconfig
> index 16294a6a7940..9bfe1560275c 100644
> --- a/configs/am62x_evm_a53_defconfig
> +++ b/configs/am62x_evm_a53_defconfig
> @@ -10,7 +10,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
> CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80b80000
> CONFIG_SF_DEFAULT_SPEED=25000000
> CONFIG_SPL_DM_SPI=y
> -CONFIG_DEFAULT_DEVICE_TREE="k3-am625-sk"
> +CONFIG_DEFAULT_DEVICE_TREE="ti/k3-am625-sk"
> CONFIG_SPL_TEXT_BASE=0x80080000
> CONFIG_OF_LIBFDT_OVERLAY=y
> CONFIG_DM_RESET=y
> @@ -56,6 +56,7 @@ CONFIG_CMD_EFIDEBUG=y
> CONFIG_MMC_SPEED_MODE_SET=y
> CONFIG_OF_CONTROL=y
> CONFIG_SPL_OF_CONTROL=y
> +CONFIG_OF_UPSTREAM=y
> CONFIG_MULTI_DTB_FIT=y
> CONFIG_SPL_MULTI_DTB_FIT=y
> CONFIG_SPL_MULTI_DTB_FIT_NO_COMPRESSION=y
> --
> 2.43.0
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 0/3] arm: dts: am625/am62a7: Switch over to OF_UPSTREAM
2024-06-05 15:27 [PATCH 0/3] arm: dts: am625/am62a7: Switch over to OF_UPSTREAM Nishanth Menon
` (4 preceding siblings ...)
2024-06-06 18:46 ` Bryan Brattlof
@ 2024-06-18 14:53 ` Tom Rini
5 siblings, 0 replies; 9+ messages in thread
From: Tom Rini @ 2024-06-18 14:53 UTC (permalink / raw)
To: Nishanth Menon
Cc: Dhruva Gole, Bryan Brattlof, Vignesh Raghavendra, Robert Nelson,
u-boot
On Wed, 05 Jun 2024 10:27:49 -0500, Nishanth Menon wrote:
> Cleanup am625 on by switching over the last two platforms (SK and
> beagleplay) over to OF_UPSTREAM, and while at it, switch over am62a7
> (last of the am62* family) over as well.
>
> This superscedes the previous version of beagleplay only patch[1]
>
> Test logs: https://gist.github.com/nmenon/ba310d3750a80789aca6a4fd90190135
>
> [...]
Applied to u-boot/next, thanks!
--
Tom
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2024-06-18 14:53 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-06-05 15:27 [PATCH 0/3] arm: dts: am625/am62a7: Switch over to OF_UPSTREAM Nishanth Menon
2024-06-05 15:27 ` [PATCH 1/3] arm: dts: am625_beagleplay: Switch " Nishanth Menon
2024-06-06 9:24 ` Mattijs Korpershoek
2024-06-05 15:27 ` [PATCH 2/3] arm: dts: am625_sk: " Nishanth Menon
2024-06-07 7:18 ` Mattijs Korpershoek
2024-06-05 15:27 ` [PATCH 3/3] arm: dts: am62a7_sk: " Nishanth Menon
2024-06-05 18:41 ` [PATCH 0/3] arm: dts: am625/am62a7: Switch over " Dhruva Gole
2024-06-06 18:46 ` Bryan Brattlof
2024-06-18 14:53 ` Tom Rini
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.