From: gregory.clement@free-electrons.com (Gregory CLEMENT)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] usb: host: xhci-plat: Make enum xhci_plat_type start at a non zero value
Date: Fri, 25 Mar 2016 18:07:09 +0100 [thread overview]
Message-ID: <87mvpmlc5e.fsf@free-electrons.com> (raw)
In-Reply-To: <87mvpm8pfl.fsf@ti.com> (Felipe Balbi's message of "Fri, 25 Mar 2016 18:58:38 +0200")
Hi Felipe,
On ven., mars 25 2016, Felipe Balbi <balbi@kernel.org> wrote:
> Hi,
>
> Peter Griffin <peter.griffin@linaro.org> writes:
>> Otherwise generic-xhci and xhci-platform which have no data get wrongly
>> detected as XHCI_PLAT_TYPE_MARVELL_ARMADA by xhci_plat_type_is().
>>
>> This fixes a regression in v4.5 for STiH407 family SoC's which use the
>> synopsis dwc3 IP, whereby the disable_clk error path gets taken due to
>> wrongly being detected as XHCI_PLAT_TYPE_MARVELL_ARMADA and the hcd never
>> gets added.
>>
>> I suspect this will also fix other dwc3 DT platforms such as Exynos,
>> although I've only tested on STih410 SoC.
>>
>> Fixes: 4efb2f694114 ("usb: host: xhci-plat: add struct xhci_plat_priv")
>> Cc: stable at vger.kernel.org
>> Cc: gregory.clement at free-electrons.com
>> Cc: yoshihiro.shimoda.uh at renesas.com
>> Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
>> ---
>> drivers/usb/host/xhci-plat.h | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/drivers/usb/host/xhci-plat.h b/drivers/usb/host/xhci-plat.h
>> index 5a2e2e3..529c3c4 100644
>> --- a/drivers/usb/host/xhci-plat.h
>> +++ b/drivers/usb/host/xhci-plat.h
>> @@ -14,7 +14,7 @@
>> #include "xhci.h" /* for hcd_to_xhci() */
>>
>> enum xhci_plat_type {
>> - XHCI_PLAT_TYPE_MARVELL_ARMADA,
>> + XHCI_PLAT_TYPE_MARVELL_ARMADA = 1,
>> XHCI_PLAT_TYPE_RENESAS_RCAR_GEN2,
>> XHCI_PLAT_TYPE_RENESAS_RCAR_GEN3,
>
> aren't these platforms using device tree ? Why aren't these just
> different compatible strings ?
According to 4efb2f69411456d35051e9047c15157c9a5ba217 "usb: host:
xhci-plat: add struct xhci_plat_priv" :
This patch adds struct xhci_plat_priv to simplify the code to match
platform specific variables. For now, this patch adds a member "type" in
the structure
Gregory
>
> --
> balbi
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
WARNING: multiple messages have this Message-ID (diff)
From: Gregory CLEMENT <gregory.clement@free-electrons.com>
To: Felipe Balbi <balbi@kernel.org>
Cc: Peter Griffin <peter.griffin@linaro.org>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, mathias.nyman@intel.com,
gregkh@linuxfoundation.org, lee.jones@linaro.org,
linux-usb@vger.kernel.org, maxime.coquelin@st.com,
patrice.chotard@st.com, stable@vger.kernel.org,
yoshihiro.shimoda.uh@renesas.com
Subject: Re: [PATCH] usb: host: xhci-plat: Make enum xhci_plat_type start at a non zero value
Date: Fri, 25 Mar 2016 18:07:09 +0100 [thread overview]
Message-ID: <87mvpmlc5e.fsf@free-electrons.com> (raw)
In-Reply-To: <87mvpm8pfl.fsf@ti.com> (Felipe Balbi's message of "Fri, 25 Mar 2016 18:58:38 +0200")
Hi Felipe,
On ven., mars 25 2016, Felipe Balbi <balbi@kernel.org> wrote:
> Hi,
>
> Peter Griffin <peter.griffin@linaro.org> writes:
>> Otherwise generic-xhci and xhci-platform which have no data get wrongly
>> detected as XHCI_PLAT_TYPE_MARVELL_ARMADA by xhci_plat_type_is().
>>
>> This fixes a regression in v4.5 for STiH407 family SoC's which use the
>> synopsis dwc3 IP, whereby the disable_clk error path gets taken due to
>> wrongly being detected as XHCI_PLAT_TYPE_MARVELL_ARMADA and the hcd never
>> gets added.
>>
>> I suspect this will also fix other dwc3 DT platforms such as Exynos,
>> although I've only tested on STih410 SoC.
>>
>> Fixes: 4efb2f694114 ("usb: host: xhci-plat: add struct xhci_plat_priv")
>> Cc: stable@vger.kernel.org
>> Cc: gregory.clement@free-electrons.com
>> Cc: yoshihiro.shimoda.uh@renesas.com
>> Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
>> ---
>> drivers/usb/host/xhci-plat.h | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/drivers/usb/host/xhci-plat.h b/drivers/usb/host/xhci-plat.h
>> index 5a2e2e3..529c3c4 100644
>> --- a/drivers/usb/host/xhci-plat.h
>> +++ b/drivers/usb/host/xhci-plat.h
>> @@ -14,7 +14,7 @@
>> #include "xhci.h" /* for hcd_to_xhci() */
>>
>> enum xhci_plat_type {
>> - XHCI_PLAT_TYPE_MARVELL_ARMADA,
>> + XHCI_PLAT_TYPE_MARVELL_ARMADA = 1,
>> XHCI_PLAT_TYPE_RENESAS_RCAR_GEN2,
>> XHCI_PLAT_TYPE_RENESAS_RCAR_GEN3,
>
> aren't these platforms using device tree ? Why aren't these just
> different compatible strings ?
According to 4efb2f69411456d35051e9047c15157c9a5ba217 "usb: host:
xhci-plat: add struct xhci_plat_priv" :
This patch adds struct xhci_plat_priv to simplify the code to match
platform specific variables. For now, this patch adds a member "type" in
the structure
Gregory
>
> --
> balbi
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
next prev parent reply other threads:[~2016-03-25 17:07 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-25 14:46 [PATCH] usb: host: xhci-plat: Make enum xhci_plat_type start at a non zero value Peter Griffin
2016-03-25 14:46 ` Peter Griffin
2016-03-25 16:58 ` Felipe Balbi
2016-03-25 16:58 ` Felipe Balbi
2016-03-25 17:07 ` Gregory CLEMENT [this message]
2016-03-25 17:07 ` Gregory CLEMENT
2016-03-25 17:44 ` Felipe Balbi
2016-03-25 17:44 ` Felipe Balbi
2016-03-26 9:10 ` Peter Griffin
2016-03-26 9:10 ` Peter Griffin
2016-03-26 10:10 ` Felipe Balbi
2016-03-26 10:10 ` Felipe Balbi
2016-03-29 9:04 ` Lee Jones
2016-03-29 9:04 ` Lee Jones
2016-03-28 6:55 ` Yoshihiro Shimoda
2016-03-28 6:55 ` Yoshihiro Shimoda
2016-03-28 8:30 ` Felipe Balbi
2016-03-28 8:30 ` Felipe Balbi
2016-03-28 10:01 ` Yoshihiro Shimoda
2016-03-28 10:01 ` Yoshihiro Shimoda
2016-04-11 15:44 ` Peter Griffin
2016-04-11 15:44 ` Peter Griffin
2016-04-13 17:00 ` Mathias Nyman
2016-04-13 17:00 ` Mathias Nyman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87mvpmlc5e.fsf@free-electrons.com \
--to=gregory.clement@free-electrons.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.