All of lore.kernel.org
 help / color / mirror / Atom feed
From: Gregory CLEMENT <gregory.clement@bootlin.com>
To: "Michał Grzelak" <mig@semihalf.com>, linux-kernel@vger.kernel.org
Cc: andrew@lunn.ch, sebastian.hesselbarth@gmail.com,
	robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	mw@semihalf.com, upstream@semihalf.com, mchl.grzlk@gmail.com,
	"Michał Grzelak" <mig@semihalf.com>
Subject: Re: [PATCH v3] ARM: dts: dove.dtsi: Move ethphy to fix schema error
Date: Tue, 31 Jan 2023 15:39:28 +0100	[thread overview]
Message-ID: <87o7qebwf3.fsf@BL-laptop> (raw)
In-Reply-To: <20221229180155.99303-1-mig@semihalf.com>

Michał Grzelak <mig@semihalf.com> writes:

> Running 'make dtbs_check' with schema in net/marvell,orion-mdio.yaml
> gives following warnings:
> mdio-bus@72004: Unevaluated properties are not allowed
> ('ethernet-phy' was unexpected)
> 	arch/arm/boot/dts/dove-cubox.dtb
> 	arch/arm/boot/dts/dove-cubox-es.dtb
> 	arch/arm/boot/dts/dove-d2plug.dtb
> 	arch/arm/boot/dts/dove-d2plug.dtb
> 	arch/arm/boot/dts/dove-dove-db.dtb
> 	arch/arm/boot/dts/dove-d3plug.dtb
> 	arch/arm/boot/dts/dove-sbc-a510.dtb
> As every subnode of mdio is expected to have an @X, ethernet-phy subnode
> in dove.dtsi doesn't have one. Fix these errors by moving ethernet-phy
> into relevant .dts files with correct @<reg address>.
>
> Signed-off-by: Michał Grzelak <mig@semihalf.com>

Applied on mvebu/dt

Thanks,

Gregory

> ---
> Changelog:
> v2->v3
> - edit commit message according to
>   https://lore.kernel.org/all/Y6zuJrb+8j+XCksN@lunn.ch/
>
> v1->v2
> - remove patternProperties: from .yaml
> - move ethphy from dove.dtsi into relevant .dts files
>
>  arch/arm/boot/dts/dove-cm-a510.dtsi | 14 +++++++++++---
>  arch/arm/boot/dts/dove-cubox.dts    | 15 +++++++++++----
>  arch/arm/boot/dts/dove.dtsi         |  5 -----
>  3 files changed, 22 insertions(+), 12 deletions(-)
>
> diff --git a/arch/arm/boot/dts/dove-cm-a510.dtsi b/arch/arm/boot/dts/dove-cm-a510.dtsi
> index 9b9dfbe07be4..2f2f0a4bf004 100644
> --- a/arch/arm/boot/dts/dove-cm-a510.dtsi
> +++ b/arch/arm/boot/dts/dove-cm-a510.dtsi
> @@ -124,9 +124,17 @@ wifi_power: regulator@1 {
>  };
>  
>  /* Optional RTL8211D GbE PHY on SMI address 0x03 */
> -&ethphy {
> -	reg = <3>;
> -	status = "disabled";
> +&mdio {
> +	ethphy: ethernet-phy@3 {
> +		reg = <3>;
> +		status = "disabled";
> +	};
> +};
> +
> +&eth {
> +	ethernet-port@0 {
> +		phy-handle = <&ethphy>;
> +	};
>  };
>  
>  &i2c0 {
> diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts
> index 2639b9fe0ab4..170c14d7f5c8 100644
> --- a/arch/arm/boot/dts/dove-cubox.dts
> +++ b/arch/arm/boot/dts/dove-cubox.dts
> @@ -72,11 +72,18 @@ gpu-subsystem {
>  &uart0 { status = "okay"; };
>  &sata0 { status = "okay"; };
>  &mdio { status = "okay"; };
> -&eth { status = "okay"; };
> +&eth {
> +	status = "okay";
> +	ethernet-port@0 {
> +		phy-handle = <&ethphy>;
> +	};
> +};
>  
> -&ethphy {
> -	compatible = "marvell,88e1310";
> -	reg = <1>;
> +&mdio {
> +	ethphy: ethernet-phy@1 {
> +		compatible = "marvell,88e1310";
> +		reg = <1>;
> +	};
>  };
>  
>  &gpu {
> diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
> index 00a36fba2fd2..c7a3fa33c56e 100644
> --- a/arch/arm/boot/dts/dove.dtsi
> +++ b/arch/arm/boot/dts/dove.dtsi
> @@ -382,7 +382,6 @@ ethernet-port@0 {
>  					interrupts = <29>;
>  					/* overwrite MAC address in bootloader */
>  					local-mac-address = [00 00 00 00 00 00];
> -					phy-handle = <&ethphy>;
>  				};
>  			};
>  
> @@ -394,10 +393,6 @@ mdio: mdio-bus@72004 {
>  				interrupts = <30>;
>  				clocks = <&gate_clk 2>;
>  				status = "disabled";
> -
> -				ethphy: ethernet-phy {
> -					/* set phy address in board file */
> -				};
>  			};
>  
>  			sdio0: sdio-host@92000 {
> -- 
> 2.34.1
>

-- 
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Gregory CLEMENT <gregory.clement@bootlin.com>
To: "Michał Grzelak" <mig@semihalf.com>, linux-kernel@vger.kernel.org
Cc: andrew@lunn.ch, sebastian.hesselbarth@gmail.com,
	robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	mw@semihalf.com, upstream@semihalf.com, mchl.grzlk@gmail.com,
	"Michał Grzelak" <mig@semihalf.com>
Subject: Re: [PATCH v3] ARM: dts: dove.dtsi: Move ethphy to fix schema error
Date: Tue, 31 Jan 2023 15:39:28 +0100	[thread overview]
Message-ID: <87o7qebwf3.fsf@BL-laptop> (raw)
In-Reply-To: <20221229180155.99303-1-mig@semihalf.com>

Michał Grzelak <mig@semihalf.com> writes:

> Running 'make dtbs_check' with schema in net/marvell,orion-mdio.yaml
> gives following warnings:
> mdio-bus@72004: Unevaluated properties are not allowed
> ('ethernet-phy' was unexpected)
> 	arch/arm/boot/dts/dove-cubox.dtb
> 	arch/arm/boot/dts/dove-cubox-es.dtb
> 	arch/arm/boot/dts/dove-d2plug.dtb
> 	arch/arm/boot/dts/dove-d2plug.dtb
> 	arch/arm/boot/dts/dove-dove-db.dtb
> 	arch/arm/boot/dts/dove-d3plug.dtb
> 	arch/arm/boot/dts/dove-sbc-a510.dtb
> As every subnode of mdio is expected to have an @X, ethernet-phy subnode
> in dove.dtsi doesn't have one. Fix these errors by moving ethernet-phy
> into relevant .dts files with correct @<reg address>.
>
> Signed-off-by: Michał Grzelak <mig@semihalf.com>

Applied on mvebu/dt

Thanks,

Gregory

> ---
> Changelog:
> v2->v3
> - edit commit message according to
>   https://lore.kernel.org/all/Y6zuJrb+8j+XCksN@lunn.ch/
>
> v1->v2
> - remove patternProperties: from .yaml
> - move ethphy from dove.dtsi into relevant .dts files
>
>  arch/arm/boot/dts/dove-cm-a510.dtsi | 14 +++++++++++---
>  arch/arm/boot/dts/dove-cubox.dts    | 15 +++++++++++----
>  arch/arm/boot/dts/dove.dtsi         |  5 -----
>  3 files changed, 22 insertions(+), 12 deletions(-)
>
> diff --git a/arch/arm/boot/dts/dove-cm-a510.dtsi b/arch/arm/boot/dts/dove-cm-a510.dtsi
> index 9b9dfbe07be4..2f2f0a4bf004 100644
> --- a/arch/arm/boot/dts/dove-cm-a510.dtsi
> +++ b/arch/arm/boot/dts/dove-cm-a510.dtsi
> @@ -124,9 +124,17 @@ wifi_power: regulator@1 {
>  };
>  
>  /* Optional RTL8211D GbE PHY on SMI address 0x03 */
> -&ethphy {
> -	reg = <3>;
> -	status = "disabled";
> +&mdio {
> +	ethphy: ethernet-phy@3 {
> +		reg = <3>;
> +		status = "disabled";
> +	};
> +};
> +
> +&eth {
> +	ethernet-port@0 {
> +		phy-handle = <&ethphy>;
> +	};
>  };
>  
>  &i2c0 {
> diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts
> index 2639b9fe0ab4..170c14d7f5c8 100644
> --- a/arch/arm/boot/dts/dove-cubox.dts
> +++ b/arch/arm/boot/dts/dove-cubox.dts
> @@ -72,11 +72,18 @@ gpu-subsystem {
>  &uart0 { status = "okay"; };
>  &sata0 { status = "okay"; };
>  &mdio { status = "okay"; };
> -&eth { status = "okay"; };
> +&eth {
> +	status = "okay";
> +	ethernet-port@0 {
> +		phy-handle = <&ethphy>;
> +	};
> +};
>  
> -&ethphy {
> -	compatible = "marvell,88e1310";
> -	reg = <1>;
> +&mdio {
> +	ethphy: ethernet-phy@1 {
> +		compatible = "marvell,88e1310";
> +		reg = <1>;
> +	};
>  };
>  
>  &gpu {
> diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
> index 00a36fba2fd2..c7a3fa33c56e 100644
> --- a/arch/arm/boot/dts/dove.dtsi
> +++ b/arch/arm/boot/dts/dove.dtsi
> @@ -382,7 +382,6 @@ ethernet-port@0 {
>  					interrupts = <29>;
>  					/* overwrite MAC address in bootloader */
>  					local-mac-address = [00 00 00 00 00 00];
> -					phy-handle = <&ethphy>;
>  				};
>  			};
>  
> @@ -394,10 +393,6 @@ mdio: mdio-bus@72004 {
>  				interrupts = <30>;
>  				clocks = <&gate_clk 2>;
>  				status = "disabled";
> -
> -				ethphy: ethernet-phy {
> -					/* set phy address in board file */
> -				};
>  			};
>  
>  			sdio0: sdio-host@92000 {
> -- 
> 2.34.1
>

-- 
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com

  parent reply	other threads:[~2023-01-31 14:40 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-12-29 18:01 [PATCH v3] ARM: dts: dove.dtsi: Move ethphy to fix schema error Michał Grzelak
2022-12-29 18:01 ` Michał Grzelak
2022-12-30 16:00 ` Andrew Lunn
2022-12-30 16:00   ` Andrew Lunn
2023-01-31 14:39 ` Gregory CLEMENT [this message]
2023-01-31 14:39   ` Gregory CLEMENT

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87o7qebwf3.fsf@BL-laptop \
    --to=gregory.clement@bootlin.com \
    --cc=andrew@lunn.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mchl.grzlk@gmail.com \
    --cc=mig@semihalf.com \
    --cc=mw@semihalf.com \
    --cc=robh+dt@kernel.org \
    --cc=sebastian.hesselbarth@gmail.com \
    --cc=upstream@semihalf.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.